USER MANUAL - CCI Solutions
Contents
1. gt 4 Sending data to myMix PLUG 6 Display of web browser lt _ 5 Updating new value in project file Log On to myMix CONTROL When you have made a connection wired or wireless you will see the log in page The firmware version is displayed right There are two user groups Administrator User name admin User User name user myMix Control version 1 50 Both have the generic password password which can be changed under Administration The user can be kicked out of the project by another user or administrator The administrator can t be kicked out by a user myMix CONTROL Home Page Riders HOME this page for general administration overview about all myMix in project IEX16 overview about all IEX16 in project Edit Project Info _ Change project name author and Project Info description of current project Name Propect 1 Create Project Creates a new project If you create a new Parts Unknown project while connected to a network all old Description Project description data from the current project will be cleared and only the current data from the units on the network will be pulled in Edit Project Info Create Project save LoadProject Menu to up and download project files Save Load Project Before you create a new project it s recommended to save the project as back up 7 Mix Uni new myMix Units View IEX16 Units View myMix Units Overview about all myMix devices of2. the current project Admin View IEX16 Units overview about all IEX16 in current project Opens the administration page of myMix Plug Note on myMix Projects You can save entire project with all devices and all their settings myMix entire device settings individual myMix Profile config channel select mix settings individual myMix Lock Settings Individual myMix Preferences unit name display settings etc IEX16 entire device settings configuration with channel names A myMix projects file captures all data from all devices based on the MAC address If you plan to use the exact same hardware same MAC address then saving a profile is perfect to capture all data If you plan to use the same or similar set up but with other hardware different MAC addresses it s recommended to also save the myMix and IEX16 devices individually Manage Projects Edit Project Info Change project name author or edit the project description Creates a new project erasing all data for the current project on the myMix PLUG not on the myMix and IEX16 and pulling in the current data from the units on the network If you are uncertain if you may need the data later it is recommend to save the current project before making a new one Save Load Project Opens the page to load and save a project Loading a project in the myMix PLUG Is loading a project file with all data for myMix and IEX16 including their MAC address from eithe
3. and keep moisture away from the unit 6 Do not block any ventilation openings Install and use only in accordance with the manufacturer s instructions 7 Do not install or use near any heat sources such as radiators heat registers stoves or other apparatus including power amplifiers that produce heat 8 Protect the power cord from being walked on or pinched Replace the power supply it if the power cord or power supply shows signs of damage 9 Only use attachments and accessories specified by the manufacturer 10 The MYMIX PLUG unit should only be used with a power supply as specified from the manufacturer If the provided plug of the power supply does not fit in your outlet consult your local dealer for the appropriate outlet 11 Do not handle the power supply and other power cables with wet hands or on wet floor to avoid the risk of electric shock 12 Unplug the MYMIX PLUG unit during lightning storms 13 Refer all servicing to qualified service personnel Do not attempt to open the unit yourself Servicing is required when the MYMIX PLUG unit has been damaged in any way liquid has been spilled or objects fallen into the unit the unit has been exposed to water or moisture does not operate normally or has been dropped 14 Do not place any objects filled with liquids such as cups and glasses on the unit 15 If anything drops into the connector slots remove it after unplugging the power supply or consult your techni
4. with all of their settings and data When the myMix PLUG interface gets connected to a myMix network it automatically pulls in all data from the network Data that was already in the current project will get updated but not erased We recommend to save a project before you log out and close Opening a dedicated page on the web server interface refreshes the data for that particular page Now changes in the editor can be made and be applied send to the edited device Leaving the editor with out applying sending the data to the device leaves the device unaltered If a page is opened in the editor of the web browser and left open while changes are made locally on the device they will not be automatically shown on the editor screen Thus it is important to use always freshly updated screens for editing Below two examples of the data flow in the system User le r oe p Web Browser Internal Interface amp a ae Interface Memory Internal ed Memory o ia Q ia 1 Edit myMix automatical refresh gt 2 Sending data request to myMix 4 Display in web browser lt _ 4 Updating new data in project file lt __3 Sending data to myMix Plug 5 Changing one parameter value APPLY gt _ 6 Forwarding new value to myMix _ gt 7 New value on myMix 1 Editing a value on myMix 2 Open or refresh editing page gt 3 Sending data request to myMix
5. PLUG This is only recommended when you are already accessing via a LAN connection Software Update Page On this page you can update the firmware of the myMix PLUG interface Please check if the software update of the myMix PLUG will also require an update of your myMix devices mys Control Software Update Seale to wpioad Bees Mo file chosen 1 a Tjaa jja T ajaj m pg Dra aj ij aip j a a i a a l p t l k Hna Ihe Woes is Complete you will be redirected to ihe fogin pag Reset lo Default Sets the myMix PLUG back to factory default including passwords and labels All project data in the internal memory will be deleted Before you reset your myMix PLUG make sure that you have downloaded all data to a computer or the USB drive bi Admin page Manage Passwords Manage saved myMix preferences 74 6b 62 00 0F64 myMix preferences Manage saved myMix lock settings 74 6b 82 00 0F84 myMix lock settings Manage saved myMix profiles M01 Profile NEP02 Manage saved projects Project Live0727 01 Manage device labels Network Configoration El Enable wireless samre Updates Sotware Updates Page Reset to defauts Hegel to Detauil myMix Select Page Lat HEJ T ia Lt PIs MAC Address Name Label Current Profile Status F4 6b 82 00 05 ce MOA te new 11 online P46b 82 00 04 ABC Ta new 17 anina 46820000 a myMiaz2 FO2 PROFILE 1 oning P46b 32 00 08 38 PA PFROFILE 1 aning iy hh
6. allows any computer or mobile device independent of the operating system that runs a web browser application to work with myMix CONTROL That is a big advantage because there is no need to install dedicated software and drivers to communicate with the myMix PLUG interface Please take a few minutes and make yourself familiar with the file structure and exchange procedure in myMix CONTROL myMix File structure Profiles Preferences Locking and IE X16 data myMix stores all data entries or edits in the local memory which is divided into three main groups preferences profiles and locking Profiles and all their content as well as preferences can be edited directly on the myMix device or via the myMix CONTROL software The locking can only be edited through the myMix CONTROL The IEX16 input expander has a much more simpler file structure It can be edited through myMix CONTROL and also through myMix devices as long as the input expander is not locked Preferences Profiles Profile 1 Locking Up to 20 IEX16 Input Expander Input Mode Input Configuration Channel Naming Input Gain Time Device Name Name oe Configuration Channel Naming Master Meser Eo Came Selecion Selection myMix PLUG Network Interface File Transfer myMix Plug has an independent file system which can receive and send data to devices in the myMix system The settings are handled in Projects A project contains the data of all myMix and IEX16 devices
7. name the units and the input channels or consider importing a default device 2c Turn off all inputs you don t want to use If you need send mix to network only for one or two myMix leave it off for now 3 Create New Project that will kick out all offline devices 4 Create a myMix with start settings if you have created a default setting that you can import skip 4a and 4b 4a Open edit details for one myMix turn off local inputs and send mix to network and delete all but the current profile 4b Go to channel select page and delete all unwanted offline channels 4c If you see all channels you want to assign the Channel Select page continue with 4e 4d If you can t see all channels toggle between mix page and channel select page to get all new channels visible on the channel select page see page 15 4e Select the channels that you want to be available as starting point for all or a group of myMix 4f Unless you know very well the level requirements we recommend not to bring up the volumes or only very low on the mix page you can however set some panning and maybe even effects 4g Probably rename the profile 4f Edit or import the lock settings to this devices as you want them as a starting point 5 Use the copy and past on the Select myMix page to transfer the setting to all other myMix that should share the setting If you have different groups of starting profiles create several versions If you want them to be chang
8. the PC s wired interface connection to acquire an IP address dynamically 3 Allow the PC s wired interface connection to resolve the DNS automatically 4 Power the myMix PLUG and connect the wired interface to a switch that is connected to your PC 5 Allow the plug computer to start initialize 2 green leds lit one flashing 6 It s recommended to disable all other network connections 7 Under Network Connections Details check if the IPv4 address is within the 169 254 x x addresses IPv4 link local 8 Open a web browser and type rae Beachrnins c Peaden Pilke HE Faiy Controder 7 Peake Sine EG TF a 5b mymixplug local in the browser DHCP ahsror Js Are oe ee Cae oat i iPad Dubnsaraske Jon ei 9 Log on with username and password Frd Starrddahgetoey NOTE before you can connect to myMix PLUG the network connections need to be fully established On Windows it shows as Public Network Ls x ahi HET WHE Pii Wh ced Ht oa Lal bese worl i Teles Shires Meira arinegen Daire Ear mime gH 1 Tp eri eed oe 1 a I 3 ba a mth dure en P i fier myMix CONTROL is compliant and has been tested with most common web browser applications However there are differences in the performance as far as looks and access speed If you feel that myMix CONTROL acts slow you might want to try a different web browser app y y 3 Some basic information about myMix CONTROL myMix CONTROL is web browser based application This
9. CH WARRANTIES APPLY ONLY TO THE EXTENT REQUIRED BY LAW AND ARE LIMITED IN DURATION TO THE WARRANTY PERIOD NO WARRANTIES APPLY AFTER THAT PERIOD SOME STATES OR J URISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATION ON DURATION MAY NOTAPPLY TO YOU LIMITATION OF WARRANTY UNDER NO CIRCUMSTANCES SHALL MOVEK ITS SUPPLIERS RESELLERS OR SERVICE PROVIDERS BE LIABLE FOR ANY OF THE FOLLOWING EVEN IF INFORMED OF THEIR POSSIBILITY 1 THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES 2 LOSS OR DAMAGE TO YOUR DATA OR 3 SPECIAL INCIDENTAL INDIRECT OR CONSEQUENTIAL DAMAGES INCLUDING LOST PROFITS BUSINESS REVENUE GOODWILL OR ANTICIPATED SAVINGS AS SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES THE ABOVE LIMITATION OR EXCLUSION MAY NOTAPPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR J URISDICTION TO J URISDICTION YOU MAY ALSO HAVE OTHER RIGHTS UNDER APPLICABLE LAW OR WRITTEN AGREEMENT WITH MOVEK NOTHING IN THIS WARRANTY AFFECTS STATUTORY RIGHTS INCLUDING RIGHTS OF CONSUMERS UNDER NATIONAL LEGISLATION GOVERNING THE SALE OF CONSUMER GOODS THAT CANNOT BE WAIVED OR LIMITED BY CONTRACT Declaration of Conformity for USA Model Number myMix PLUG Type of Equipment Computer Interface for Audio Equipment Responsible Party MOVEK LLC Address 6517 Navaho Trail Edina Minneso
10. I 1 ITH ii a OOO myMix Select is showing all myMix devices in the current project The page refreshes the data from the network when opened Please note that it can take up to one minute to recognize devices changing their status online offline Refreshes the data from the network Each myMix is show with MAC address device name preference Label if applied and online status Green currently online red currently offline Opens the myMix device for detailed information and parameter editing Add new device this function can be used to import a new offline device to the project file Enter the MAC address and name hit Create Activates the Master Mute button on the myMix device When muted the button toggles to Unmute As the Master Mute on myMix is visible from the distance this can also be used to locate a unit Send Mix to Network can be activated by switching from off to on or deactivated by switching to off If a myMix has selected another mix from the network it will be automatically deselected when the Mix to Network is enabled from here The mix of a unit is used a lot by engineers to listen to a persons mix Send TH tS neta Send mix to network Send mix ta network Send mix to netrork Copy and paste profiles and lock settings from one myMix to other myMix devices These functions are very helpful when preparing a larger system in a new project as you can edi
11. NNEL 1 int l myMix 22 CHANNEL 2 jin ABC CHANNEL 1 ABC CHANNEL 2 DEMO 8 Track 13 B3 ae DEMO 8 Track 16 Keys ego MOTA CHANNEL 1 inf ew 0 PRY z MO1A CHANNEL 2 ni E Gee CENTER CHANNEL 1 CHG B g bad E DEMO amp Track 15 Jason l CENTER M E a E CHANNEL 2 la Edit Mix Page is showing the current mix parameters of the myMix device at opening of the page Note that changes made manually on the myMix itself after the page is loaded are not reflected in this display That s why we recommend not to leave this page open too long unless there is nobody operating the myMix manually Channels are shown with their network names device name channel name Volume 0dB is max Ton Control from Bass12 to Flat to High 12 effect send and Pan The resolution of the Ul is identical to one click with the myMix encoder The check boxes Solo and Mute can be used to active these function on the device If solo and or mute are active when the page is opened they will be displayed as checked and with the yellow resp red logo The green dot indicates that the channel is online Clear All Solo S clearing all selected solo ed channels at once Needs Save Apply to become active Clear All Mute is clearing all channel mutes at once Needs Save Apply to become active is zeroing the mix all mix settings neutral Needs Save Apply to become active Enable Maste
12. aa EX aad USER MANUAL Firmware Rev 1 51 Remote Configuration and Editing Software Welcome to myMix CONTROL Table of Contents Safety Information Te myMix CONTROL is a web browser based software Warnings O 2 application It is designed to help engineers supporting larger Set Up Connections 3 myMix systems as well as AV installers to quickly configure Basic Info 4 andor OK individual functions on a myMix The myMix Fe err S DIG acte asnetworkinterrace and web cerver Ge a ee eee myMix CONTROL allows from a client computer to Projects Save Load Create a Administration cece e up and download an entire project with allistdevices MyMix Select Page 2 aaa 8 e configure myMix and IEX16 remotely myMix Details Page o aaa e edit parameters of individual units on the network myMix Edit Profile Page 10 Be one cow i a poles MyMix Edit Mix Page a eee myMix Edit Channel Select Page rl E myMix Lock Settings Page aa T13 myMix Preferences Page rt SelectIEX16 Page Oaa l4 Edit 16 Page ccs n D Some Advice on how to work efficiently Updating Firmware Z myMix Plug Interface J18 Limited Warranty ee 8 Pee AOL OO MY a a ve SAFETY INSTRUCTIONS 1 Read all safety and operating instruction before using MYMIX PLUG 2 Keep these instructions in a safe place for future reference 3 Heed all warnings and follow all instructions 4 Do not use the MYMIX PLUG unit near water e g a bathtub or swimming pool 5 Clean only with dry cloth
13. cal representative IMPORTANT NOTE IMPORTANT Read the following before operating the myMix PLUG WARNINGS Do not locate MYMIX PLUG in a place subject to excessive heat or in direct sunlight This could be a fire hazard Do not place MYMIX PLUG in a place subject to excessive humidity or dust This could be a fire and electrical shock hazard Connect the supplied AC power cord only to an AC outlet of the type as marked on the main unit Failure to do so is a fire and electrical shock hazard Do not place heavy objects on the power cord A damaged power cord is a potential fire and electrical shock hazard If the power cord is damaged i e cut or a bare wire is exposed ask your dealer for a replacement Using MYMIX PLUG in this condition is a fire and shock hazard Hold the unit when disconnecting from an AC outlet Never pull the cord Damaging the power cord in this way Is a potential fire and electrical shock hazard Do not place small metal objects on top of MYMIX PLUG Metal objects inside MYMIX PLUG are a fire and electrical shock hazard Do not block the MYMIX PLUG ventilation holes MYMIX PLUG has ventilation holes at the front and the rear to prevent the internal temperature from rising Blocked ventilation holes can damage the unit and are a fire hazard Do not try to modify MYMIX PLUG This could be a fire and electrical shock hazard Do not use MYMIX PLUG in an environment outside of the temperature
14. ct SavelLoad Project View mhis Uris View EX 16 Unis Load Project Load from OR CHEmeencm Please select a project Eisg Please select a project MEESE aee RIE MINDENE Choose File Siteiewenercn Save Project Save to intemal storage USB 15GB 15GB free Download Severe F roject Administration Page Manage Passwords Here you can create new passwords for the Administrator and the User user not implemented Note myMix CONTROL only accepts one client at a time If you are log in as administrator a user can t log in Manage Saved myMix Lock Settings Manage Saved myMix Profiles Manage Saved Projects Showing a list of available files on the internal memory of the myMix PLUG Manage Device Labels In order to identify myMix devices during set up myMix powered down it is recommend to apply physical labels to the outside enclosure of the myMix The Label allows to make a link between the MAC address and the physical label on the myMix To avoid errors typing the MAC address we recommend to copy the MAC address from the myMix Select Page mark with mouse and copy to clipboard CTRL C CTRL V Copy and past the MAC address of the myMix unit then type in the label name number then press create Edit allows to change that info delete erases the label The info is stored on the myMix PLUG Network Configuration Allows you to turn off the wireless communication of the myMix
15. ed globally at the same time they need to have the same name 16 Firmware Update Instructions myMix CONTROL You need the following files for the update included in the zipped folder that contains this instruction For myMix Plug interface the file update bin about 99kB on the harddisk of your computer For myMix amp IEX 16L the files mymix blob and iex16 blob 11 Both need to be on a formatted in myMix SD card Name Type _jiex16 bleb BLOB File NOTE if your myMix PLUG Interface is already on 1 51 TE myMix CONTROL V1 50 pdf Adobe Acrobat you don t need to update it However IEX16 and myMix myni blob BLOE File need all be upgraded to 1 51 for proper operation A date kin BIN File 1 Update the myMix devices and IEX16 to firmware 1 51 as usual 2 Make sure all devices run firmware 1 51 3 To update the myMix PLUG interface power up the myMix plug without any network connection The myMixPlug is ready when one of the 3 green LEDS is flashing 4 Create a wireless connection from your computer to the myMix PLUG 5 Open a web browser e g Explorer Firefox Chrome and enter 192 168 1 1 in your browser 6 Log on to the myMix Plug on the log in page you should see the firmware version 1 47x or 1 50 using username admin password password 7 Once you are logged in go to Administration 8 Move to the lower end of the page and find Reset to Default Click and confirm 9 Click on So
16. edit it Offline before activating it making it audible on the myMix This function is an alternative for copying a profile Import Profile Imports a previously saved exported profile to this myMix device Edit Locks opens the locking edit menu page Import Locks allows to import previously saved exported lock settings Export Locks allow to save the lock settings of this myMix in internal memory USB or on client computer Reset Locks resets all lock settings of this myMix to unlocked Edit Preferences opens the preference editing page for this myMix Import Preferences to import previously saved exported preference settings to this myMix Export Preferences to save the current preferences of this myMix to internal memory USB client computer Reset Preferences resets the preferences of this myMix to default Export All Settings allow to save all settings preferences locks and all profiles of this myMix to internal memory USB or client computer Import All settings allows to import previously saved myMix settings to this device 9 trol myMix Edit Profile Page This page allows to edit the parameter in the current myMix profile Renames the current profile on the myMix and in the project file Rename Cancel Edit Mix opens the myMix edit mix page Edit Channel Select opens the channel selection page Phantom Power status on or off Input Mode Dual Mono Stereo Mono None C
17. expressly approved by the manufacturer for compliance could void the user s authority to operate this equipment 18
18. ftware Update Pages and click on Choose File 10 Navigate to the file update bin and open 11 The myMix PLUG is updated 12 Close Browser open again and log in again on the log in page you should see now myMix CONTROL 1 51 mybha Conio Sothware Update fl io upload oaae File fin file chosen Fics Ga Cuil fal en Ft i 4 FET G Cosa lel 2 We Ww H DE redirea ag if 17 myMix PLUG Network Interface and Web Server Specifications and Dimensions J Lt Jo te E E lt 96 mm gt lt mm gt Marvel Kirkwood 6281 1 2GHz 512MB 16bit DDR2 800MHz NAND Flash 512MB WiFi 802 11 b g 1 GB Ethernet Port 2 USB 2 0 Power input 100 240VAC 50 60Hz Max 20W DC Consumption 5V 3 0A Max 95mm L x 65mm W x 48 5 mm H Information on Disposal of Old Equipment The symbol below on the products packaging and or accompanying documents means that used electrical and electronic products should not be mixed with general household waste For proper treatment recovery and recycling of old product please take them to applicable collection points in accordance with your national legislation and the directives 2002 96 EC and 2006 66 EC By disposing of these products correctly you w
19. hannel 1 and Channel 2 Names Send Mix to Network Status On Off Effect Type Small Medium Large Room or Hall or Delay Effect Time for delay applies only if delay is selected Repat intensity for delay applies only if delay is selected Play Along Status On Off EQ Bypass Off No EQ On EQ effective Filter type for Low and High Master Eq peaking or shelving Four Band Master EQ Frequency Q and Gain per band Apply this button transfers the file with the recently made changes to the myMix and saves them in the project file Before the setting are applied the changes made on the screen are not in effect leaves that page without sending data to myMix and storing it in then project file Home MyMix IEX16 Log Out MAC 74 6b 62 00 0b a7 Unit name myMix 22 Profile name new 11 Rename Edit Channel Select Phantom power Input mode Channel 1 name Channel 2 name Send mix to network OTT Effect type Ore Effect delay time Effect delay repeat 7 Play along EQ Bypass Low Master EQ Type UNESCA SEPE Peaking Master Equalizer Frequency Q Gain Low Low Mid 4 l High Mid High 4 0005 Apply f Back 10 myMix Edit Mix Page MAC 74 6b 82 00 0b a7 Unit name myMix 22 Label 03 Profile name new 112 Clear All Salo Clear Adl Mute Enable Master Mute Master Volume Step Value I Unitname Channelname Volume Ton Effects Level 7 Solo Mute Online myMix 22 CHA
20. ia a w a w a a a ia a a a a a a a a Selected pananta Dual Mono D Add offline channel mMmIVEx control Channel name Selected Online Delete myMix Edit Lock Settings The lock functions are completely new to myMix and only accessible through the myMix CONTROL software A myMix that is locked can only be unlocked through myMix CONTROL In this menu individual functions the whole unit or a menu can be locked from unwanted access through the myMix front panel If a menu is locked the individual functions therein will automatically be faded So e g if Settings is locked all functions accessible through Settings are not available anymore and turned off The lock settings of a myMix can be exported edit myMix page and imported from internal memory USB drive or client computer Pressing Lock send the lock message to the myMix This function can t be access on the myMix anymore To unlock simply press Unlock If a menu is locked that includes several individual functions all of them disappear from the screen The current selection includes Global Lock complete unit is locked Master Volume Zero Mix Solo Mute Settings locks out everything accessible under settings Profiles New Profile Delete Profile Rename Profile Local Inputs Outputs Effects Master EQ Sessions Delete Rename Play Remote Channel Select Remote Devices Preferences Unit name Administration Format SD Card Res
21. ill help to save valuable sources and prevent any potential negative effects on human health and the environment For more information about collection and recycling of old products please contact your local municipality your waste disposal service or the point of sale where you purchased the item z4 The symbol above is only valid in the European Union If you wish to discard these items please contact your local authorities or dealer and ask for the correct method of disposal TVA LIMITED WARRANTY This MOVEK warranty applies only to products you purchased for your own use MOVEK warrants thateach myMix productthat you purchase is free from defects in materials and workmanship under normal use during the warranty period The warranty period starts on the original date of purchased specified on your sales receipt or invoice unless MOVEK informs you otherwise in writing During the warranty period of one year or longer as required by law MOVEK will provide warranty service without charge for parts and labor in case a defect in material or workmanship occurs THIS WARRANTY IS YOUR EXCLUSIVE WARRANTY AND REPLACES ALL OTHER WARRANTIES OR CONDITIONS EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF EXPRESS OR IMPLIED WARRANTIES SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU IN THAT EVENT SU
22. ings and IEX16 devices In addition you can also save just an individual profile the preferences or the lock settings Utilize Copy and Paste for Profiles and Lock Settings on myMix Select Page The myMix select page see page 8 is showing all myMix devices in the network The copy and paste function on this page for profiles and lock settings is the fastest way to deploy new settings to many devices simultaneously Even if you plan to change some settings like channel select or mix more individually having a common start profile that includes all available channel names or a basic lock setting helps speeding up the certain of a new project big time Note that when pasting lock settings they will be deployed immediately Pasting a profile writes it to the memory of the myMix but if the profile name is not the name of the current profile it has to be recalled using the global profile change Things to consider when creating an all new project using myMix and IEX16 As an all new project we understand a set up with all or most new audio channel names Independent if device names for the myMix remain the new audio channel names and the profiles using them make the difference 1 Before you start with the new project make sure you have saved the current one 2 Create audio channels for new project 2a Enter the new channel names to the IEX16 s either manually or by loading a previous setting 2b If you use inputs on myMix devices
23. l only be recognized if all of the above does match EEUE GUITAR ee mi mr rne mi MAC 746b 82 00 08 08 Current profile MAC Address Name T4 Gb 8200 19 db DEMO 8 Track Fy phe tj F x F Er d Darr eer ff bb bo U0 1o co Subpmxes Agg new grach Label Status onine Edi 14 Edit IEX16Page Edit IEX16 page allows to edit the configuration of the selected IEX16 Name is the device name of the IEX16 Locked allows to lock the unit from unwanted access through myMix devices on the network Input Selector Mode for inputs 1 8 and 9 16 Line DB25 or ADAT digital input via TOSLINK See IEX16 manual for ERRE DEMO Track further details Channel Names names as will appear in the network for every myMix device to see When you change a channel name it will become a new channel If you plan to rename several you might consider creating a project and save the CHANNEL NAME current CH 4 p Input Mod can be changed between ERA Dual Mono Stereo or Disable In Stereo Mode only the name of channel 1 is used Gain allows to add 6dB or 12dB to the input Apply transferring the edited setting to the project file and the IEX16 device leaving the page without changes Saving the settings to internal memory USB stick or computer Import l l Imports configurations for IEX16 from internal memory USB drive or computer Apply New network channels Changing a name of a channel or importi
24. ng a complete setting with all new names channel names that are not stored already in the current myMix profiles introduces a new channel to the network If a myMix device has free channel slots e g less than 16 channels selected these will be automatically shown on the mix page with zero settings To see these new channels in myMix CONTROL you need to go first to the mix page of the myMix device then they will also be displayed on the channel select page If there are more new channels in the network then you can see on the mix and channel select page deselect as many as you have new channels Go to mix page and then they ll show up in channel select where you can select or deselect bi MODE Dual Wong Dual Moro GAIN 15 Some advice to work efficiently with myMix CONTROL Make Use of Labels Use labels on your myMix and IEX16 devices All myMix and IEX16 are usually named but during set up before the power is on they can t be differentiated The label is a relation between the unique MAC address of a myMix or IEX16 and a physical label that can be applied to the units The label is saved on the myMix PLUG s internal memory This one time effort will save a lot of time going forward See page 7 for details Create a Library of Default Settings With myMix CONTROL you can save an entire project but also individual settings of entire myMix units including all profiles of a unit and lock sett
25. ofile Current profile new 11 Channel names editable in profile Send Mix to Network editable in profile also on myMix Select page I name CHANNEL 1 Profiles wee showing an overview of the locally stored profiles in that myMix max 20 The current profile is marked with a yellow bar and also in the pull down menu above Independent of the current profile you can PROFLE 1 Ey Copy I Delete a PROFILE 3 opens the myMix edit profile page Delete Edit J Expon E Copy E Delete Export export save the setting internally on USB or lbs your client computer aati ee OS creates a copy of that profile with the name copy_ Edit Locks Locks import Locks Locks Reset Locks deletes this profile from this myMix aE Edi Preferences E import Preferences E Export Preferences E Reset Pretarences The Current profile is displayed and can be changed by St Rent Re cB selecting from the list and then Change The profile will be recalled on the myMix within a few seconds If you make changes any other but the current profile they will be transferred and saved in the myMix but only become audible if recalled Create Empty Profile This function creates a new profile with default settings The channel selection will be copied from the current profile Note that creating a profile does not automatically recall it like it does on the myMix device This allows to create a profile and
26. r Internal Storage myMix PLUG memory USB USB drive connected to myMix PLUG interface Upload upload of project file from hard drive of the client computer IMPORTANT NOTE the uploaded project data will be transferred to the connected myMix and IE X16 devices and overwrite the current data This should never be done while people are using myMix Saving the entire project data to internal USB or client computer The field Save as allows to name the project file differently The data gets refreshed right before it is saved We recommend to make a backup of the project before closing and powering down Loading a project When you load a project file the project data is loaded to the myMix Plug first and then forwarded to all devices currently in the network with a matching MAC address myMix and IEX16 They will get all data as previously stored Depending on the file size this can take one or two minutes Device names can change easily what counts for identification is the MAC address Units that are in the project file but NOT in the network you will see them as offline on the select pages Units that are online in the network but not in the project file they will keep their setting without any changes Note you can copy settings from offline to online devices if you want to bi Project Info jm a 4 ame Fruer fi eT LENO MEIO T Descriphon Project descnptio Edi Project Info Greate Proje
27. r Mute activates the Master Mute on the myMix Enabled it reads Disable Master Mute myMViix a trol myMix Edit Channel Select Page MVM 3 lt M yM IX IEX16 This pages shows network channels and their status regarding selection in this profile While not visible on the myMix device PEN itself each profile stores up to 128 channels myMix automatically stores all channels it sees on the network and if they are selected or not The criteria for a new channel to be memorized is the MAC address of the sending device and the alphanumeric channel name Any change here is considered new and will be automatically saved Channels with yellow bar selected and present on the mix screen of the unit also visible on the Edit Mix page Channels with green dots channels that are online on the network but currently not selected in this profile or selected but not displayed because the 16 channel limit is exceeded To select or deselect a channel use the check box IMPORTANT NOTE myMix can selecta max of 8 signal pairs max 16 channels If selections are made that exceed the 16 the myMix will deselect automatically everything exceeding that maximum Channels with red dots and a check box for delete These channels are currently offline If they are from a previous set up and won t be needed in this profile any more they can the deleted by checking the delete box Transfers the changes on this page
28. range between 5 C and 35 C 41 F and 95 F To function with myMix CONTROL all myMix and IEX16 devices need to operate on firmware rev 1 51 or higher System Set Up Connecting WiFi Log in The myMix PLUG has to be connected to the myMix network via the Ethernet port using a CAT5 cable The connection from the client computer to the myMix plug can be either via WiFi or LAN Connect the myMix PLUG to mains power Booting can take up to three minutes When the second LED comes up and the third LED is flashing the myMix PLUG is ready to use gt m Optional External USB Storage To connect to the myMix PLUG establish a WiFi connection from your computer to dream u xxxx Then open a web browser application on your computer and type 192 168 1 1 The log in page of the myMIx PLUG will come up Username admin Password password or username user To establish the connection between your computer and the myM iX You can change passwords after your first log in on the Admin aes ere STE pe eect Ny HI GeMices page If you change the passwords we recommend to put a note on a secure place Setting Up a LAN connection to myMix PLUG To use the myMix PLUG with a wired connection the computer needs to be connected to the myMix network switch with a CAT5 cable 1 Make sure you have installed Bonjour available form http Awww apple com support bonjour on your computer 2 Allow
29. t one unit with the start up setting and then copy to all others Or copy a setting from a myMix that has been replaced with a new different MAC one Get a starting setting to all units on the system 1 create the profile you want to use as master in one myMix 2 Click Copy 3 Select all myMix you want to copy that profile to with the check box or use Select All 4 hit Paste The master copy is now available on all devices you selected NOTE the profile will be copied into all selected myMix when you press Paste but it will not change the current profile in case somebody is using the myMix the current profile will not be changed To change to the new profile use Change myMix Profile Globally The drop down menu Select Profile is showing all existing profile names in the project Select one e g Rehearsal and the press Change All myMix that have a profile called Rehearsal will then switch to this profile myMix units that don t have a profile with that name will remain unaltered Using different names for the profiles allows to change several myMix in groups myMix Detail Page This page shows the detail of the individually selected myMix to edit the data or mange the individual settings from the myMix MAC address of myMix this is fix and serves as unique identifier Phantom Power editable in profile Unit name myMix 22 Input Mode editable in pr
30. ta 55439 U S A Telephone Number 1 952 657 7889 This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures a R eorient or relocate the receiving antenna b Increase the separation between the equipment and receiver c Connect the equipment into an outlet on a circuit different from that to which the receiver is connected d Consult the dealer or an experienced radio TV technician for help CAUTION Changes or modifications to this equipment not
31. to the project file App and the myMix device leaves the page without changes Add remote channel if you know the MAC address of a myMix device currently not in the system and a channel name that you would like to add offline you can use this function NOTE this function does not generate a channel it has to be on a device that will be later added to the network Note offline channels that are left overs from old projects should be deleted to keep the file size small If there are new channels in the network that you can t see please read paragraph New Network Channels MAC 74 6b 82 00 0b a7 Unit name myMix 22 Label 03 Profile name new 11 Unit name ABC CHANNEL 1 ABC1 CHANNEL 2 DEMO 8 Track 13 B3 DEMO 8 Track 15 Jason DEMO 8 Track 16 Keys MO1A CHANNEL 1 M01A CHANNEL 2 PA CHANNEL 1 PA CHANNEL 2 DEMO 8 Track 01 Kick DEMO 8 Track 02 overhead DEMO 8 Track 03 Bass DEMO 8 Track 04 Guitar DEMO 8 Track 05 Ricky keys DEMO 8 Track 07 jason Vocal DEMO 6 Track 08 B 3 Organ DEMO 8 Track 09 Kick DEMO 8 Track 10 Snare DEMO 8 Track 11 Bass DEMO 8 Track 12 GIT PC 01 Kick me 02 DRUMS ne 03 BASS PC 04 GIT PC 05 B3 PC 07 JASON VOC 08 KEYS 3 09 SEQ 10 WOOD 11 BRASS PC 12 STRINGS PC 13 PERC 1 PC 14 PERC 2 PC 15 VOX PC 16 CLICK ABC1 Stereo Mix ABC 1 Vocal 1 ABC1 Vocal 2 DEFAULT CHANNEL 1 MO1A CH MO1A CHB PA ZUSPIELER Add a new remote channel lt i i j a a a a a a a a a a a a a
32. tore Factory Defaults Update IEX16 Firmware Master Mute Record Channel Volume Channel Tone Channel Effect Channel Balance myI zz Home MyMix IEX16 Log Out Back Global Lock MERCAT Lock Zero Mix Salo Mute Settings Profiles nE Lock Delete Rename Local Inputs Outputs Effects Master EQ Lock Delete eile Lock a Play Remote Channel Select Remote Devices Preferences Unit Name Administration Format SD Card Restore Factory Defaults Update IEX16 Firmware Master Mute Record e Channel Wem Lock gt Tone Effect Pan Bal Sessions 1134 myMix Edit Preferences Page This page has about the same functionality as the preferences menu on a myMix device You can change the myMix Name the Current profile in addition to the myMix detail page Activity time out Screen brightness View mode list or overview Transfer and save the changes to the project file and the myMix device Leaving the page without changes Select IEX16 Page Select IEX Page is showing all available IEX16 in the project file Units that are currently online are shown with a green indicator units in offline with a red dot Press EDIT to go to the IEX16 configuration page This page is refreshed when opened Note that new devices on the network might take up to one minute to become visible Add new device allows to add a new offline IEX16 MAC address label and name Note the unit wil
Download Pdf Manuals
Related Search