FieldMaxII-TO™ Quick Start Guide
Contents
1. Contact Information USA Phone 1 800 343 4912 Fax 971 327 2777 E Mail info _service Coherent com Europe Phone 49 6071 968 0 Fax 49 6071 968 499 E Mail info _service Coherent com International Phone 971 327 2700 Fax 971 327 2777 E Mail info _service Coherent com For the latest Customer Service information refer to our website www Coherent com Coherent and the Coherent Logo are registered trademarks of Coherent Inc FieldMaxII TO is a trademark of Coherent Inc FieldMaxII TO Quick Start Guide Coherent Inc 10 2005 Printed in the U S A Part No 1086222 Rev AB gt COHERENT COHERENT Quick Start Guide FieldMaxII TO Laser Power Meter This guide presents a mini tutorial that explains how to connect a sensor to your FieldMaxII TO meter and begin taking measurements within minutes For in depth information about the FieldMaxH TO meter refer to the FieldMaxII TO User Manual 1086239 Software Installation For complete software installation instructions refer to the FieldMaxI Software Installation Quick Start Guide 1096359 that shipped with your product Before using the procedure explained in this guide read the following safety warnings Follow all laser safety pro cedures The laser must be blocked or switched OFF before beginning the proce dures described in this guide Power to the F2. ieldMaxII TO instrument must be OFF before beginning the procedures described in this guide Do not exceed the power density limits of the sensor Tuning a Laser With a Thermopile or Optical Sensor Connect a thermopile or optical sensor to the FieldMaxll TO 25 pin connector Tuning Needles SANAMNI TOTTA Zone Indicator Bars Apply power to the instrument Use the Up and Down arrows to select the appropriate measurement range instrument is automatically placed in Manual Ranging Tuning is shown on the display using tuning needles and zone indicator bars The tuning needles at the top of the display are now zoomed in to enhance laser tuning For detailed information about Tuning mode refer to the FieldMaxll TO User Manual Measuring Power With a Thermopile or Optical Sensor The following illustration outlines how to take a power measurement using a thermopile or optical sensor Connect a thermopile or optical sensor to the FieldMaxll TO 25 pin connector 2 Press the Auto button to turn on Auto Ranging Block the beam and then press the Zero button to set the baseline for your new measurement Unblock the beam take the measurement and observe the result on the display
Download Pdf Manuals
Related Search