Home

USER MANUAL

1. SWIT Rechargeable Li ion Battery Pack S 8132A S S 8152A S Ver V1 0 0V00 USER MANUAL SWIT Electronics Co LTD Tel 86 25 85805753 Fax 86 25 85805296 http www swit cc E mail contact swit cc Characteristics 1 High performance Li ion battery pack rechargeable 2 Large capacity with separable design not restricted by IATA air transportation regulations 3 4 step LED power indicator 4 D tap DC output and charging socket 5 Build in multiple protective circuits Caution 1 The battery pack is disassembled in package Please assemble the part A and part B first and make sure the serial numbers of the 2 parts are the same 2 The battery pack should be disassembled and packed individually before boarding to airplane Each part has under 100Wh capacity and will not be restricted by IATA regulations 3 The battery pack can not be used or charged until the part A and part B are assembled 4 Please mind the polarity of the D tap socket when using DC output 5 Do not expose the battery pack to rain or moisture environment 6 Do not expose the battery pack to temperature above 60 C 7 Keep the battery pack terminals clean 8 The battery pack may become warm in use or while being charged This is normal IMPORTANT SAFETY INSTRUCTIONS A Never short circuit the battery pack terminals A Never attempt to open the battery pack A Keep the battery pack away from fire A Avoid strong mecha
2. e socket away from dust Assembly and Disassembly Assembly When using Slip the Part A into Part B that with the same SN It will be automati cally locked and beep twice to confirm the match If the battery beeps constantly when assembled please check the serial numbers of part A and B Disassembly When air transportation 1 Set the lock of Part A to UNLOCK and hold it 2 Slip the Part A out of Part B 3 Keep the 2 parts separately during air transportation Storage Please disassemble the battery and keep the 2 parts separately in cool dry and clean place S 8132A 14 4V 126Wh 8 8Ah 100W 8A 168x93x65mm S 81325 14 4V 126Wh 8 8Ah 100W 168x93x60mm S 8152A 14 4V 146Wh 10 2Ah_ 100W 168x93x65mm S 81525 14 4V 146Wh 10 2Ah_ 100W 168x93x60mm
3. nical shock Charging 1 The battery pack is not fully charged when it is purchased Charge the battery before use 2 Use SWIT charger or the chargers recommended by SWIT 3 Do not use the D tap socket while charging 4 The battery pack should be charged within a temperature range of 0 40 C Discharging 1 Fully charged battery pack will discharge naturally and please use it as soon as it gets charged 2 At low temperature the running time of battery pack usually decreases 3 The internal impedance of battery pack will be greater at low temperature which may cause the automatically circuit cutting 4 The battery pack will cut off power automatically when overload or any abnormal detected Please take off the battery from equipment lay it for a while and charge on any of SWIT chargers and it will be re activated and get charging normally Specifications Model Mounttype Nominal Capacity LED indicator 1 The four step LEDs indicate the remaining capacity when press the CHECK button 2 The indicator may not be accurate when the battery is powering on the camera 3 When only one LED indicates please charge the battery as soon as possible DC socket The D tap DC socket can be used as 14 4V DC output or SWIT S 3010B charging input 1 Open the rubber cover and plug in D tap lead to DC output or charge Mind the polarity of the D tap plug 2 Close the rubber cover when disconnected to keep th

USER MANUAL

Contents

Download Pdf Manuals

Related Search

Related Contents