1 Million Candle Power Rechargable Spotlight
Contents
1. rolson e QUALITY TOOLS 1 Million Candle Power Rechargable Spotlight USER S MANUAL amp WARRANTY INFORMATION IMPORTANT SAFETY INFORMATION Please read this manual carefully before use and retain for future reference RoHS COMPLIANT 2002 95 EC p FEATURES AND SPECIFICATION Rubberized lens protector and grip Locking trigger switch for safety Built in 6 Volt 4 Ah sealed lead acid rechargeable battery 6 Volt H3 Halogen bulb Maximum 25 watt AC Adaptor 230V 50Hz 12 Volt DC charger Figure 1 Trigger switch lock Halogen bulb Soft rubberized grip Trigger switch O gt Charging LED indicator Charging port OPERATION To turn the spotlight on squeeze the trigger switch see Figure 1 To turn the spotlight off release the trigger switch To lock the trigger switch for continuous operation squeeze the trigger switch and firmly slide the trigger switch lock see Figure 1 the spotlight will stay on until the lock is released Spotlight will provide up to approximately 25 minutes of continuous operation on a full charge Figure 2 Charging port Kamle FOLLOW THESE INSTRUCTIONS FOR CHARGING Risk of fire and injury to persons Only using the charger provided Do not attempt to use different charger or power adaptor Using other charger or power adaptor may damage the unit or injury to person Risk of fire and injury to persons Using the battery charger pro2. perate the spotlight while charging This will permanently damage the unit 4 DO NOT touch lens or block lens area during operation 5 DO NOT place the unit on surfaces that may be damaged from heat Allow the unit to cool before storing 6 DO NOT shine into eyes of humans or animals Please keep the spotlight from the objects at least 300 mm distance DO NOT shine the same object for a long time in short distance 7 Keep children away from spotlight This is not a toy 8 Unit is not waterproof or water resistant 9 DO NOT expose battery to fire or intense heat as it may explode Battery contains acid 10 DO NOT drop or throw spotlight It contains glass and a sealed lead acid battery 11 If case should become cracked dispose of immediately taking adequate safety precautions to prevent injuries or damage to persons or property 12 DO NOT place facing down on any fabric 13 DO NOT place facing down on car seats of carpets BATTERY DISPOSAL Please note that your spotlight contains a non spillable sealed lead acid battery which must be recycled or disposed of properly Please contact your local waste management authority for disposal locations in your area P gt
3. power source and lock the spotlight trigger switch OFF 2 Remove the rubber bezel from pulling it away from the spotlight lens 3 Remove the two Phillips head screws that hold the retaining ring to the spotlight body 4 Pull off the retaining ring and set it aside 5 Carefully remove the glass lens and reflector assembly 6 Disconnect the bulb s center conductor wire from its connecting wire see figure 4 for bulb removal details 7 Remove the retaining spring of the bulb from the bottom of the reflector 8 Using the screwdriver loosen the retaining screw to remove the bulb from the reflector 9 Gently pull out the bulb unit and replace with a new H3 6 Volt Halogen Bulb 10 Insert the replacement bulb into the reflector s bottom 11 Put back and secure the retaining spring 12 Connect the bulb power wire to the red power wire 13 Reverse the above procedure to re assemble the spotlight NOTE When handling a new halogen bulb do not touch the glass portion of the bulb Natural oils from your hands can cause the bulb to fail If necessary clean the bulb with alcohol or a liquid window cleaner CAUTION amp WARNINGS 1 DO NOT leave the spotlight in total discharged state for an extended period of time Keep battery power topped up Battery needs to be charged within six months after production date 2 Turn the power switch off and recharge the spotlight as soon as possible after light becomes dim 3 DO NOT o
4. vided to charge the battery of the spot light Other types of batteries may burst causing injury to persons and damage Charging with AC adaptor Make sure all lamp and connected appliances are turned OFF Plug the AC adaptor into the charging port see Figure 2 located on the bottom of the pistol grip and then plug into a standard AC wall outlet Red LED indicator will light indicating battery inside of spotlight is being charged allow approximately 10 15 hours Do not overcharge the spotlight for more than 24 hours Charging with 12 volt DC charger Make sure all lamp and connected appliances are turned OFF Plug the DC fused adapter into the charging port see Figure 2 located on the bottom of the pistol grip and then plug insert the cigarette lighter plug into the cigarette lighter socket of your vehicle or other 12V DC power source Red LED indicator will light indicating battery inside of spotlight is being charged allow approximately 6 8 hours charging time if the engine is running Do not overcharge the spotlight for more than 9 hours 3 RETAINING RING i Hd REFLECTOR j AS a PHILLIPS o SCREWS HAIRPIN RETANING je WIRES f BULH f REPLACEMENT a Opan Figure 4 BULB REPLACEMENT For bulb replacement you will need a small Phillips screwdriver Not provided To replace the H3 6 Volt Halogen Spotlight bulb See Figure 3 and Figure 4 1 Disconnect the Spotlight from any charging
Download Pdf Manuals
Related Search