yakima whispbar racks k133 fit kit installation instructions help user
Contents
1. Prorack Loads of life GB Fitting Instruction for Accessory Revision No 1 1 Fitting Kt First Time Installation Remove parts from packaging and check contents Contact your Prorack dealer if parts are missing or damaged a a ag This kit fits type A B C and D These instructions show type A crossbar fitted They also apply to type B C and D 4 r f D NOTE Clamp images in these instructions may not be representative of the clamps in this kit Fitting Kt Use keys to remove covers Use hex screwdriver to reverse adjusting screw 10 turns Press adjusting screw and pull crossbar legs out Refer to the crossbar instructions for crossbar adjustment Ensure each end of the crossbar is adjusted equally Fitting Kt Remove locking screw Apply protective strip as shown Trim if required Chere J394 J37A Bit K 12A Letters refer to the part numbers stamped on clamps Clamp Part Number aa a A 336 ed La SN Q B 337 9 oO Fitting Kt Attach clamp to each leg NOTE clamps may have labels showing their positions on the vehicle For example Front Right Refit locking screw so that it goes through the hole in the clamp Do not begin to tighten the locking screw Fit rubber pad supplied with crossbar to foot Fitting Kt Make sure th2. e pad fits into the holes underneath the foot Fitment Place crossbar on vehicle Minimum recommended spacing between the bars is 700mm unless otherwise stated Clamps directly to edge of roof under the doors Please check the rear of this manual for information relating specifically to your vehicle Adjust the legs on the crossbar so that they are positioned equally from the ends of the crossbar and the clamps engage firmly on the body work of the vehicle Fitting Kt Tighten adjusting screw to 5 Nm Tighten locking screw on both legs evenly Check crossbar is securely attached to the vehicle Fitting Kt Use keys to fit and lock covers CAUTION Regularly check screws are tight
Download Pdf Manuals
Related Search