8CH Mobile DVR User Manual
Contents
1. Click Finish to close this wizard Cancel 5 2 client uninstall I program DVR Uninstall pop up program uninstall wizard 36 HN LIB co BUD ESSE Installer Language Please select a language English JE 2 Click on remove pop up the uninstall progress DYR Player Uninstall Uninstall HDVH Player Remove MOVE Player from your computer PIDVR Player will be uninstalled from the Following Folder Click Uninstall to start the uninstallation Uninstalling From D Program Files D RClientiMOVR Player Wullsoft Install System v2 39 lM i Uninstall Cancel Al IRA ALLE ae ESSE EB ui Player Uninstall Uninstallation Complete Uninstall was completed successfully Completed JAILLLLLLLLLLL LLL LLL TL LLLLLTL LLL LLL LLL LLL LLL LLL LLL LLL LLLI Show details 3 Click Close then uninstall successfully 5 3 Instruction of Client Main Functions EN v The RecordFile interface realizes the search and playback functions of the recording file in the storage medium search and playback the recording file in the storage medium HDD or SD card by channel number start and end time recording type and car number Playback function support single channel playback by file and time support multi channel playback by time automatically play the next paragraph Double click a file to start four channel playback Finished playing a file2. 1 2 Playback by time Playback by time supports single channel and multi channel audio and video playback After set up channel number start and end time and recording type click TimePlay the recording file of any type of the selected channel within this time period will playback When the mouse moves 40 HON ES ES to one of the channels the audio will playback the audio of this channel double click to realize viewing recording file in big picture Four channel playback can be realized 1 3 Backup File Select the recording file which you want to backup from the list box then click BackupFile button select the storage path to backup When the backup 1s complete there will be a succeed prompting The backup file can be with 1fv and avi format 1 4 Backup by Time After set up the channel recording type and the start time and end time of the file click BackupByTime realize multi file backup at the same time Setup the backup path and type in the Set interface 1 5 Setting This function is used to set the backup path and backup type of the file 1 6 Empty Data This function is used to empty the recording file in the storage medium HDD or SD card Note The data will not be able to be restored after empty Please use it cautiously 1 7 Language This software supports Chinese and English 2 Playback Interface 4 HON EEES ES RecordFile PlayBack Log NativeDir When the mouse points to t
3. 1 USB2 0 high speedpon USB port 1 USB2 0 high speed port Support USB SD card update wireless network update DC 6V 32V other working 25 60 C temperature firing signal no load 4W fully loaded arrange 28W PC playback bundled software Playback video file software 1 2 Basic working parameter item working parameter instruction RA ES ES 6 32V Alarm input is 6V 32V Power output 12V 0 2V peak current 2A Power output Power output 5V 4 0 2V peak current 2A Above 3 3V E Alarm type could be self defining obligate serial use for extend RS485device RS485 serial self defining port SD card port Under the case of HDD 1 compatible with various USB USB port 2 support charged pluck insert working 10 60 C temperature 1 3 Main Functions of the Product Functions Functions description classification Support four recording modes manual recording timing recording motion detection recording and alarm recording Support 6ch CIF and 2ch DI format recording Support PAL NTSC Record OSD overlay as time license plate number channel name stop reporting information and so on Support SATA HDD and SD card storage Support SATA HDD and SD card auto cover Support 8 ch audio input video frequency processing All channel D1 live display Support single channel video playback Support 8 ch playback playback Support play pause frame forward slow forward fast forwar
4. HDD and start the recording why doesn t it record A There are three possibilities When the HDD connected is new it cannot record without format Thus you need to format the new HDD first When set overwrite when the device 1s full in the Setup interface the device will stop recording when the HDD is full When the HDD connected is defective it will not record while the system can preview 4 Why can t the SD card be formatted A When the capacity of the SD card is less than 4G it cannot be formatted 5 Why can t the connected mobile HDD or the U disk backup A When the file system format of the mobile HDD or the U disk is NTFS they cannot backup 6 Why sudden shutdown occurs sometimes A When ACC is under stalling status up to the time set of ACC Delay it will auto shutdown 7 Why does the device will auto start after shutdown A When conduct soft shutdown ACC is still under ignition status thus the device will auto start after shutdown 8 Why doesn t the device shutdown immediately after stalling A There is ACC Delay setting in the Setup which default to 5 minutes namely it will shutdown after 5 minutes since receiving the ignition signal to shutdown immediately after stalling you only need to set the time of ACC Delay to be 0 9 WIFI network status is displayed linksuccess Why can not log on to IE remote control A Such case set a static IP To confirm whether it is succes
5. Management Add user delete user and modify user Other users except the Admin user don t have the authority to set the authorities of the other users gt Add User Enter User operation interface 19 HON ES ES 1 Input New User Name On the User interface click Add enter Add Modify User interface input a new user name like user input type supports number uppercase and lowercase letters and Chinese 2 Setup Password for the New User On the Add Modify User interface click Password button enter the password setup interface input new password directly password is 6 or less than 6 digits then confirm password The password will become valid after confirmation 3 Setup Rights for New User On the Add Modify User interface mark means that the user can use this right while blank means that the user cannot use this right 4 Save the Setup Information of the New User After confirmation the setup information of the new user will be saved cancel means give up modification gt Modify User Enter the User operation interface click left mouse button or press the 11 OK button on the remote control to select the user which needs to be modified in the user selection box click the Modify button enter the user modification interface you can modify user password and operation authority Note admin administrator can modify the rights of the other use
6. circuit Disconnect the connection between the equipment and the power before connecting other external devices 3 Correctly connected equipment ground wire to the vehicle ground wire to compose loop 4 If long term do not use the machine it is best to completely disconnect the device s power to extend the use life 2 humidity requirements 1 install the equipment in dry environment avoid moisture drip water water spray and other places 2 do not touch device with wet hands 4 Install location 1 To extend the equipment life install the equipment in the weaker parts of the vehicle vibration as far as possible such as driver s seat back 2 Equipment should be install in the vehicles air over position 3 The equipment external wire need sufficient interval and flame retardant jacket s protection to ensure the wire can t be bent or wear due to vibration to leakage 4 Ensure the equipment away from heat source on the vehicle around it can not have varia piled up strictly prohibit to place any objects on the device 5 As far as possible away from the complex electromagnetic environment away from the strong interference environment 9 Equipment safe 11 HON ES ES 1 Ensure passengers or driver can not interfere or damage the equipment s any part 2 When Install equipment launch vehicles may cause damage to the equipment to ensure that the vehicle 1s stationary during the installation process to prevent the device drop 3 2
7. 3 59 4 1 Browse Used to set the file which save the recording files in local 4 2 Search Select the car number and the start time and end time which you want to search click Search button all the recording files of a vehicle within a time period will display in the list box Note StartTime has record function namely after the start time is set up when the system is run next time the start time will be the same as the one set up last time 4 3 Native Play Setup the path car number start time and end time click NativePlay button to play the recording file within this time period by time 44 HON ES ES 6 Frequently Asked Question 1 How to operate the motion detection recording A There are mainly two steps for setting the motion detection recording gt Set the sensitivity area and the recording channel to be triggered of the corresponding channel in the MTD page gt Set the time of the corresponding channel triggering the motion detection recording in the Schedule page Note the alarm recording setting is similar to the motion detection recording setting You need to set the recording channel in the Alarmin page and set the time in the Schedule page 2 How to modify the information in the edit box when use remote control A Use FN to switch the type of the input character use the MENU key to exit the edit mode after edit is complete 3 After connect the
8. 6 d occ TONS DERE oo oec A IL IR ORTI Zi RU A ili 27 4 920 Deployment Se ITE ille 28 2 5 2 7 Expection PrOCESSINE siii alia iaia 28 2 0 2 5 MIO HON DEE ION lid 29 4029 FZ CO Ura Oe 29 HON SE Bo LER EF At 4 5 2 10 Networkseimes js LL a 30 T5 PTZ COD UOL oui ON 3 4 5 2 Tog Informati ita n ai eme m Me IM Rd uen MEUM 22 4 5 5 5hutdOoWl Systema 32 4 8 6 Timing Start and Shutdown Device 33 4 8 7 Bus Informati us ete nr bte eat VU erae rta 33 4 8 8 Overlay Setting nnne eene ne ness s sss s nsns aras 34 5 CLIENT SOFTWARE USER MANUAL een eo ea o ene eaa aaa Een uer ga sg Ca E Vae eeu pe eer a aae ea ea Vene o ea Ude 35 S CIENT SORT WARE INS TAL ic 35 XKUENUNNTLI IRE 36 5 3 INSTRUCTION OF CLIENT MAIN FUNCTIONS cccccseccsscccssccssccssccsccesscesscesscesscescesccs 38 5 4 CLIENT OPERATION INTRODUCTION ille 39 6 FREQUENTLY ASKED QUES TION siissscssccctinisssvnsecsdossesasaesesconssonscsssusadscsdeatonssiessisossinds 45 1 Product Introduction 1 1 Product Summary This 8ch MDVR 1s specially designed high price quality ratio product for the car mobile video monitoring It adopts embedded processor and embedded operating system combines the latest technologies in the IT filed like audio and video compression decompression technology High capacity HDD record wireless transmission GPS location technology and so on Its structure adopts special anti vibration technology
9. Physical address Display the current MAC address also can be modified IP address Set the machine s IP address must be unique Set the corresponding subnet mask default gateway and DNS address Start using domain Fill in the domain name corresponding to the service centeraddress service center fillin the Public network IP address connect with 3G Control port data port Must be consistent with the network port mapping values 2 WIFI setting Start using Select you can open the WIFI settings don t Select you can turn off the WIFI settings IP subnet mask gateway Similar to the Ethernet set WIFI visit IP ESSID Used to distinguish different network Wireless LAN card settings different 30 HON ES ES ESSID into different network when setting any It automatically searches for a access point within the signal range and attempt to connect to 1t IP type Static IP is manually IP address Dynamic IP the system automatically obtain IP address password Need to manually enter the wireless router s password to connecto 3 3G setting network type you can choose WCDMA and EVDO Connect way Supports three types of connections always connected manually connect SMS trigger User names passwords telephone numbers need to input right User names passwords telephone numbers 4 8 3 PTZ Control Enter the PTZ control Interface Press the PTZ button on the remote control or click the left mouse button to enter
10. SCH Mobile DVR User Manual PRODUCTINTRODUCTION lia 1 I PRODUCE SUMMAR Ycua is 1 1 1 FRODUGISREG TABLE eli ico 1 1 2 BASIC WORKING PARAMETER ili aa 2 1 3 MAIN PUNCTONS OF THE PRODUCT alii lio elle 3 2 STRUCTURE INTRODUCTION OF THE PRODUCT APPEARANCE 5 2X PRODUCE CONNECTION PORT INSTRUCTION 2d 5 242 KEMOTE CONTROL INSTRUC TION 2 leali 10 INSTALL INSTRUCTION wistescsesstestinsccscesececccsowistensdnnstestinssetacsecstssasbbstensdeescestsecssesedecstaess 11 3 1fHOST MACHINE INSTALLATION NOTES 0ccccccccsescccssccacsccescensesansestevssnevdasuacensascucsadaveacens 1 3 2 POWER VV I chela 12 4 SYSTEM OPERATING INSTRUCTION n 13 AS TAR ES Gd REND ira 13 ELSHUTDO WN Y STE Ma 13 4 3 BASIC OPERATION INSTRUCTION OF MENU occoccccnccnonccnnnccnnncnnnccnonccnonccnonoconarnonaccnnacnnnoss 13 4 5 Enter Men Moderazione isolani aaa 13 4 3 2 Menu Component Instruction i 13 Die A eae ase atin Em 14 FAENA i UN ct ERREUR EDT 14 4 CHANNEL PREVIEW iaia ie ee ad 15 O A pui d Up ut 15 Ao MANUAGRECORDING id 17 edle c M eee 18 OS ia 18 As ADD MANAGEMENT cats ill 19 4 6 1 2 WISER NANAGEMENT aa ad 19 4 5 1 3 Restore to DE a 20 A AN A 21 A Old SOM Ware UPS io 21 2 9 Wa el BD AA A A 22 4 5 lsd System tora ON aio 22 2 5 1 5 Tinport and A A ala 23 ESA ystem ASA isdem eva O A Uem esae uices 24 2 0 2 2 RECO Set o sicilia 25 9 90 29 NS E a 2
11. Software using a particular hard disk protection technology to effectively solve the problem of frequently encountered Car DVR hard drives error The product has good shock resistance heat resistance and stability it can be widely applied to various types of vehicles 1 1 Product spec table item device Parameter Performance index Hiasis Operating System Embedded Linux operating system Operating Chinese English Traditional Chinese language System Operating Graphical menu user interface interface Password Two level management user password Security administrator password 8 ch composite Video Input automotive aviation head 1 ch automotive aviation head composite video Video Output Video output 1 ch Lotus head video output video Display Single picture view four picture view PAL 25FPS s Video Standard NTSC 30 FPS s Audio Input 8 ch audio input automotive aviation head Audio Audio Output 1 ch audio output HON AMER KALER EF HERR Recording way Sound and video recording synchronization Image H 264 Variable stream VBR Fixed stream Compression CBR CIF DI optional Monitoring Quality image format PAL 720x576 D1 NTSC 720x480 D1 Playback Quality Image PAL 352x288 CIF NTSC 352x240 CIF processing and storage 64Kbps 1 5Mbps 6 level adjustable Audio ADPCM Compression oK Support 1 SATA HDD with any capacity 1 SD card data Storage above 4G Alarm communication por
12. The introduction of the PTZ Control function gt The main operations of PTZ Control are direction control rotation zoom control adjust the focus adjust the iris In addition to the rotation function other four options can choose the control speed gt Switch the page to invoke the preset point start stop auto cruise wiper control light control auxiliary equipment control Note The invoked preset point must have been set up For the setting method of the cruise path please refer to the cruise path number setting in 3 8 2 9 PTZ setting When the cruise path number set up is less than 2 digits you need to add 0 to fill up 2 digits before the value of the corresponding cruise path number set up 31 HON ES ES 4 8 4 Log Information Search the log information record in the device according to the log type and the start and end time Type Select the log type including all alarm expection local operation and remote operation Start End Set the start and end time of searching log Prev Used to go to the preview page Next Used to go to the next page Goto Used to go to the specified page 4 8 5 Shutdown System Logout Used to cancel the current user After logout if you want to continue to use the device you need to login the system again Restart Used to restart the device Shutdown Used to shutdown the device namely soft shutdown device HON SE Bo BUD ES 4 8 6 Timing Start and Shutdown De
13. atio Display image at 4 3 or 16 9 also can automatically adapt 2 6 Snapshot Capture the image of any time selected by the user 2 7 Open File This function is used for single channel playback the recording file in the PC end 3 Log Interface System supports search log by type and start time and end time RecordFile PlayBack Log NativeDir Type All Browse 2012 01 01 00 00 00 sube 2012 02 27 15 05 31 M Search Lag Index RecordTime 4 Content 3 1 Browse Used to setting the path of the log file log bin click Search Log to view the log file Without setting the path 1t will default to search the current log information in the storage medium 43 IES ESSE 3 2 Type Include all alarm exception local operation and remote operation Select the type of the log you want to search 3 3 Start Time and EndTime Set the start time and end time of the log you want to search 4 Local Recording Search Interface Used by the recording files of the car number and time search saved in local RecordFile PlayBack Log MativeDir PA m All C Documents and Settings Browse StartTime 2010 01 01 00 00 00 EndTime 2012 02 27 15 05 31 MN Search MativePlay Index Car Number Tm StartTime EndTime Size KkB HH MRSS H1 1 2011 11 22 05 52 03 2011 11 22 06 00 23 38034 00 08 20 CH1 1 2011 11 10 14 19 21 2011 11 10 14 34 49 6508 00 15 28 i B67907 1 2010 06 14 05 24 18 2010 06 14 05 28 17 15178 00 0
14. d last section next section silent and other functions Support searching record file search by time search by channel number by RA ES ES meording tyre Support Local signal value alarm Motion detection alarm and Abnormity Alarm processing alarm Record of Vehicle Support device number line number and car number recording function Information Switching 1 support the timer switch control 2 Support start and delay shut down function base on CACC Support automatic or manual upgrade Support WI FI wireless download network Support 3G transmission Support GPS globe location HN LIB co BUD ESSE 2 Structure Introduction of the Product Appearance 2 1 Product Connection Port Instruction 40 00000000000000000000 2 39 00000000000000000000 Pri J3 o o J23 o n e 20 0000 000000l I 10 00000000080 10 0000000000 20 0000000000 1 1 20J 0000000000 11 HON GE Bo ALERT EF At Code Numbe Punction Connection Port Definition Us e extended port Hi UD ADOBE 2 USB DMI 3 3G Reset 4 USB DPI control protected control Detect ani si SD_DATAO 22 GND 23 SD CLK 24 GND m a e ir supply supply E GND 34 NC 35 GND 36 NC sue sui Power input port a GND o GND 3 5 32V 3 5 32V input 4 4 ACC 1 GND 5V power USB2 0 port 2 USB DM4 3 USB DP4 4 GND ma 10M 100M network a port HDD key port 1 GND 2 HDD key wu unis nl e ooh ane e
15. e remote control you can playback the specified file Select All used to fast select all the recording files on the current page v will be shown after selection in order to backup files Prev jump to the previous page Next jump to the next page Goto go to the specific page Backup you can use the FN key on the remote control or the number 0 or the right mouse button to make a backup mark backup the selected recording file in the current list box to the corresponding device USB disk gt Cancel return to the previous page 4 Playback operation instruction The buttons on the information bar below the playback screen respectively represent exit pause frame forward slow forward fast forward go to the last section go to the next section sound the other information represents play speed real play time the total time of the recording file gt gt Cancel display the information tip bar press the shift key on the remote control or click the right mouse button will display cancel the information tip bar Exit play press the ESC key on the remote control or click exit by mouse can exit the play screen at any time it will auto exit the play screen when the file is finished Fan Pause continue play press the Pause button D on the remote control can pause continue play Frame forward under the pause mode each click the frame forward button it will play 1 frame forward namely s
16. e system will auto shutdown when unplug the lock of the HDD 4 2 Shutdown System There are three ways of soft shutdown system 1 long press the POWER button on the remote control for 5 seconds 2 the ignition signal of the vehicle 3 System sets timing shutdown system Through necessary processing after about 5 seconds the system will shutdown and the power led will turn off and the run led will turn on gt Shutdown system by power disconnection unplug the 12V power input the system will stop working As unplug power directly may affect the HDD we suggest you soft shutdown the system before unplugging the power 4 3 Basic Operation Instruction of Menu 4 3 1 Enter Menu Mode Enter the system menu by pressing the MENU button on the remote control or clicking the right mouse button 4 3 2 Menu Component Instruction Menu component units mainly include 1 Check box V means valid blank means shield There are two operating modes 1 use 13 HON ES ES the OK button orthe LT button on the remote control 2 Click the left mouse button to operate 2 Selection box provide two or more than 2 options but only one option can be selected Press the 11 button on the remote control or click the left mouse button to switch 3 List box display the search result information in the list You can select one item from list If you press the OK button or click the left mouse button the recording file wi
17. e system will restart You should unplug the USB disk immediately 4 8 2 System Setup System setup includes Setup system parameter Record recording setup Image image setup Alarmin alarm input Schedule schedule setup Expection expection handling MTD motion detection PTZ PTZ configuration and Network 23 IES ESSE 4 8 2 1 System Parameter Transpercnoy Lansuase ToDi sk Seo CL e onow status ACC Delay it Overwrite Select Yes when the HDD or SD card is full of recording the system will overwrite the earliest video information to achieve the purpose of cycle recording Select No when the HDD or SD card is full of recording the system will not record any more at this time you can choose warning processing when the HDD is full in the menu of Expection Lock Time If there is no operation within the keypad lock time the system will cancel the current user automatically To operate you need to relogin the system The lock time can be 1 minute 2 minutes 5 minutes 10 minutes 20 minutes 30 minutes If auto locking keyboard is unnecessary then you can choose Never Auto Switch It shows the time interval of single channel cycle switch in preview There are 5 seconds 10 seconds 20 seconds 30 seconds minute 2 minutes 5 minutes and don t switch options Standard used to set the image format PAL or NTSC and it is default to PAL format Transparency When t
18. ed to copy the parameters of this channel to other channel so as to configure 27 HON SE Bo BUD ES 4 8 2 6 Deployment settings Used to set the timer recording motion detection recording and alarm input recording effective in which time period choose channel number Select the channel you want to set week Choose the day you want to set You can set any day from Monday to Sunday also can be unified set all Record type and time period set Four time periods each time period can be set different record types timer recording red motion detection recording green alarm recording yellow Below has the time status display The overall schedule of 0 24 hours CopyTo Used to copy the parameters of this channel to other channel so as to configure 4 8 2 7 Expection Processing The processing way of the system when there is any expection occurs o Type Includes video loss disk full don t set overwrite disk error and video blind voice alarm Whether enable the buzzer when there is any specified expection o 28 HON SE Bo BUD ES alarm output When the specified exception occurs whether or not to trigger thealarm output 4 8 2 8 Motion Detection Channel Select the channel to be set up Sensi Trigger the motion detection sensitivity There are none lowest low middle high and highest options Area Used to set the detection of motion detection area setting mode see 3 8 2 3 the cover regio
19. ee RE ps alarm input 10 alarm input8 fit ALM ii ALM pli Hen p o ora alarm input4 e TITTEN GND 2 RS232 TXD 3 GND 4 RS232 RXD EE and audio TT GND Audio Al input 4 GND input output port Audio A2 5 Audio A2 input 6 GND Audio A3 input 8 GND di a Video VI 14 12Vpower 15 Video V2 16 12Vpower input supply input supply o tr Video V3 18 12Vpower 19 Video V4 20 12Vpower input supply input supply Input output port PoE 5 Audio A2 input 6 GND Audio A3 input 8 GND L DI ST s AE LL er eem rmi Ren input supply input supply Leer iem fe Rie input supply input supply EA AAA LED5 REC LED6 SD Card LED7 3G LED8 WIFI a GPS U20 IR pou 4 5V power i E e ON HN LIB co BUD ESSE 2 2Front Panel Port Instruction O 20 1 Status LED 2 IR 3 usB 2 0 4 HDD LOCK 6 Debug serial Video output T HDD BOX 2 2 1 Debug Serial RS232_RXD RS232_TXD 2 2 2 Status LED GPS WIFI 3G SD REC VLOSSALM RUN PWR Indicator definition instruction lt gt Power the power led will turn red when the power is connected after soft shutdown the device the power led will become green lt gt RUN this led will flash when the device is working properly after soft shutdown the device HON ES ES 1t will turn off GPS when detected GPS this led will turn on Alarm when there is any channel alarm input this led will turn on Video loss where t
20. en set VBR you can set the image quality 25 HON ES ES CopyTo Used to copy the parameters of this channel to other channel so as to configure quickly Image Setting Channel Select the number of the target channel number to be set up Name Used to modify the name of the channel cannot be copied It supports numbers uppercase and lowercase letters Chinese and common used marks up to 12 characters at the most Show Name Used to set if show the channel name and the position of the channel name shown Show Time Used to if show the time and the show position when preview Brightness Set the brightness of the image Contrast Set the contrast of the image Hue Set the hue of the image Saturation set the saturation of the image Blind In the area which needs to be blinded you can set Blind When mark J the blind area setting button will be actived and enter the blind area setting interface Area On the blind area setting interface a small yellow box will appear in the middle of the area namely blind setting box Area Creation move the yellow box to the start position of the setting area using the FN key on the remoye control yellow box and red box can switch to change it into red box red box is the motion detection area then adjust the size of the area by direction buttons after completing the adjustment of the area press the FN key this motion detection area will be selected and saved and t
21. he icon the functions of this icon will display 2 1 Stop Click Stop button to stop the file play 2 2 Pause Frame Forward Pause button controls pause or play recording file frame forward each click will play one frame forward 2 3 Playback Speed It can play in normal speed 1 time fast forward 2 times 4 times 8 times 16 times slow forward 1 2 1 4 8 1 16 2 4 Normal Speed When click fast forward or slow forward to restore to the normal speed directly click this button 2 5 Video Cut To cut any section of the video click Cut button another progress bar will appear under the play progress bar Click the right mouse button on the needed position on the progress bar can Add Cut Point Cancel Cut Point When two cut points are set up you can Backup Cut Video When the video file cut is separated into two files according to the start time and end time there will be two files generated and so on 42 HN LIB co BUD ESSE Note when the interval between the start time and the end time is relatively big but the time interval of the video which needs to be cut is relatively small two cut points will overlap together which will not affect the cut function 2 6 GPS Click this button could display the vehicle trajectory on Google Maps if no GPS information in video then display in Shanghai area 2 1 Full screen Full screen playback video file ESC key to exit 2 8 show the image r
22. he small red box will become small yellow box There are 4 blind areas can be set up at the most Click the left mouse button and drag from the left upper corner to the right lower corner the blind area will be generated After the setting is complete press the OK button or click the right mouse button to exit and save Clear All Press the MENU key on the remote control to clear all the blind areas of the channel CopyTo Used to copy the parameters of this channel to other channel so as to configure quickly 26 HON SE Bo BUD ES 4 8 2 4 Alarm Input Input Select the number of the target channel number to be set up Type According to actual conditions set if the alarm input is valid when choose High Volt orlow Volt PTZ First select the channel number set one of the linkage settings preset cruise track Duration When the alarm input is complete set up the delay time needed for dealing with buzzer video recording etc There are 5sec 30sec and 1min options Buzzer Whether to trigger the buzzer alarm Rec CH Setup which channels to be triggered to record when there is alarm input To record you have to set the time periods in the schedule interface CopyTo Used to copy the parameters of this channel to other channel so as to configure quickly 4 8 2 5 Alarm output Alarm output Select the number of the target channel number to be set up Alarm type normally closed normally open type CopyTo Us
23. he user enters the menu operation interface he can adjust the transparency between preview image and the menu by adjusting the level of the menu transparency Low middle high and opacity can be set Language Menu language type can be set according to the requirement of user There are English simplified Chinese and Traditional Chinese options ToDisk Sec Used to set how long to write HDD once which is mainly used for protecting HDD Show Status Setup if the preview screen show recording mode status and enable motion detection mark and Y means show status while blank means status not shown Preview setup the display screen after preview delay after starting the device There are single picture preview or four picture preview After starting the device will display four picture screen the device will display the screen set up after preview delay and this function will not realize after user login 24 HON ES ES QUAD Delay Set how long the preview screen set up will display after starting The value between 0 600 can be set unit is second default to 20S namely when starting but not login the device will display four picture after 20S it will display the screen set up in Preview ACC Delay Used to set when to shutdown the system after setting ACC staling The value between 0 255 can be set unit is minute When set 255 even the state is ignition the system will not shutdown Startup Mode There a
24. here 1s any channel video loss this led will turn on Record when the HDD is recording this led will turn on SD card when the SD card is detected the SD card led will turn on 3G when detected 3G module this led will turn on WIFI when detected WIFI module this led will turn on gt 2 3Back Panel Port Instruction D GPS 6 1 4 channels video audio INPUT OUTPUT 2 1 0 DC 8 36V 3 3G 4 LAN 5 5 8 channels video amp audio INPUT OUTPUT 2 3 1 Power Supply Interface P H input DC 6 329 e GND e GHD 2 3 2 I O Signal Interface Unit SEE ELE Wee Reese Gee 6 joo 11 1 20 10 HON GE Bo POP ES 2 3 3 Video Audio Input And Output Interface Video Audio output 1CH Video Audio input 5CH Video Audio input 2CH Video Audio input 6CH Video Audio input 3CH Video Audio input 7CH Video Audio input 4CH Video Audio input SCH Video Audio input Connect Camera Connect Monitor Video e video 12V H2V 1 GND GND 2 Audio Audio HON ES ES 2 4 Remote Control Instruction MENU MULTI 0 sr esc Y Instruction of some buttons 1 Power used to shutdown the system It will go into effect after long pressing 5 seconds 2 FN a used to select specified file in the recording file list in order to backup file b used to switch the input method of the
25. in the recording file while Close means not display this item in the recording file 34 HN LIB co BUD ESSE 5 Client Software User Manual 5 1 Client Software install 1 Double click DVRSetup exe into DVRPlayer Installation Wizard Installer Language Please select a language Engish gt D IDTE Player Setup Welcome to the MDVR Player Setup Wizard This wizard will quide vau through the installation of MOR Player It is recommended that you close all other applications before starting Setup This will make it possible to update relevant system Files without having to reboot your computer Click Mext to continue 2 Click Next select the installation path default isC Program Files DVRClent DVR 35 FRA LIB co BUD USE At EDYR Player Setup Choose Install Location Choose the Folder in which to install MDVR Player Setup will install MOVE Player in the Following folder To install in a different folder click Browse and select another folder Click Install to start the installation Destination Folder Coi Program FilesiDvRClientiMDVe Player Space required 16 2MB Space available 5 166 Wullsoft Install System v2 39 3 Set the installation path click Install 4 Installation is complete click Finish and the client softwareinstallation 1s successful EDYE Player Setup Completing the MDYR Player Setup 4 Wizard j MOVE Player has been installed on our computer
26. ingle frame mode play c Adjust the play speed press the Slow Play button i will reduce the play Fam speed There are 1 2 1 4 1 8 time speed for selection gt gt Fast Play will increase the play speed there are 2 4 8 time speed for selection ef Last section when play by time press pm Last Section the system will play the last file directly Para When playback by selecting file press pm Last Section the file will backward 10 and play ram Next section when playback by time press a Next Section the system will play the next section directly ram When playback by selecting file press i Next Section the file will forward 16 HN IB co BUD ESSE 10 and play gt Turn off on sound press ES MUTE can switch between sound and mute and there will be corresponding sound icon displaying Playback by time the operation is similar to Playback by file except the playback content is the recording file within the specified time period 4 7 Manual Recording Enter manual record interface Press Record on the remote control or click Manual Record by mouse can enter the manual record interface directly Manual record interface instruction The manual record operation interface is consists of the following components channel status start stop icon mark Start All Stop All and Exit Note for the recording started manually it can only be stopped manually othe
27. ll play if press the number 0 or the FN key or the right mouse button you can select cancel the recording file in order to backup the recording file 4 Edit box a You can switch the input character including number uppercase and lowercase letters and mark by the FN key on the remote control b You can move the cursor position by the 1 key on the remote control c You can delete the character before the cursor by the viop key on the remote control d After completing the input press the MENU key on the remote control you can exit the edit status 5 Button used to conduct a specific function or enter the submenu Press the OK key on the remote control or click the left mouse button to enter the submenu 4 3 3 Exit Menu Mode Press the ESC key on the remote control or click the right mouse button you can exit the menu mode and switch to preview mode 4 4 Main Menu The menu box will pop up when press the MENU key or click the right mouse button 14 IRA ARIE ae ESSE This menu includes three parts Channel preview single picture switch four picture preview Shortcut operation bar video playback manual recording Menu bar click and enter the submenu which includes Tools Setup PTZ Log Shutdown timing turn off and so on 4 5 Channel Preview Single channel Preview single click the left mouse button you can single picture preview press number 1 8 on the remo
28. nal settings Delay When the motion detection is ended how long will the related processing such as recording buzzer alarm output delay Rec CH Setup which channels to be triggered to record To record you have to set the time periods in the Deployment settings alarm output Setto trigger which alarm output Buzzer Set whether to enable the buzzer CopyTo Used to copy the parameters of this channel to other channel so as to configure quickly 4 8 2 9 PTZ Configuration Channel Select the channel to be se t up Baudrate There are eight kinds of rates 300 1200 2400 4800 9600 19200 38400 57600 and 115200 in the serial port The selected item should be in accordance with the matched PTZ rate setting Data Bit The protocol types include 6 digits 7 digits and 8 digits The selected item should be in accordance with the matched PTZ data bit setting 29 HON AMER KALER EFA Stop Bit The protocol types include 1 digit and 2 digits The selected item should be in accordance with the matched PTZ data bit setting Checksum The protocol types include none odd and even The selected item should be in accordance with the matched PTZ checksum setting Flow Ctrl The protocol types include none hardware Xon Xoff The selected item should be in accordance with the matched PTZ flow control setting Protocol The protocol types currently supported are Pelco p Pelco D Samsung b01 With the update of the software m
29. nt software supports single channel and multi channel video playback This software includes 4 interfaces totally 1 Record file search interface the system supports search recording file by channel number recording type start and end time and car number o 39 FRA ARIE ae BLE VE FF At RecordFile PlayBack Log MativeDir Chn 1 2 3 4 asl 0110 01 01 00 00 00 EndTime 2012 02 27 15 05 30 m1 Type MANUAL W SCH MTD E ALARM Car All search Index Car Number chn StartTime EndTime 4 Size kB HH MM SS e l FilePlay TimePlay BackupFile Backupey Time Setting Empty Language 1 1 Playback by file After set up the channel number start and end time recording type event and car number click Search button all the recording files which meet the conditions will display in the list box Select the recording file you want to playback double click this file or click FilePlay button to play this file Double click mouse when playback can switch the big picture to small picture Only single channel playback can be realized Note 1 StartTime has record function namely after the start time is set up when the system is run next time the start time will be the same as the one set up last time Note 2 When search the Car Number in the storage medium all the car numbers will display in the drop down list box The car numbers in the drop down list box will be updated after changing the storage medium
30. ore decoders will be supported Please be subject to the software Decoder Refer to the address of the decoder Preset Preset point is to preset and memorize the position focus aperture and zoom of the camera and use a number to identify these settings at the same time Add Preset Input a preset point in the preset point edit box ranging from 1 128 then adjust the camera to the target position by the direction button When the adjustment is complete press OK the preset point will be saved Delete Preset Input a preset point to be deleted in the preset point edit box click Delete Cruise Cruise path is a path where a camera runs at a certain speed It passes various cruise points with numbers Each cruise point includes stay preset points and retention time Thus the settings of the cruise path include the parameter settings of the cruise point preset point retention time and cruise time etc then enter set to set the cruise path and cruise path number At present one device supports the setting of 16 cruise path numbers Track Track is a line which is used to record the predefined irregular movement of the camera Enter Set to set the track CopyTo Click the application to button at the bottom apply the current configuration to the corresponding channel selected channel need to click OK button to save click Cancel button to exit without saving 4 8 2 10 Network settings DEthernet setting
31. power switch in 1 The material of the power cord depend on the device and host maximum load requirements power cord wire diameter required to 1 5MM 2 5MM use BVV wire or have jacket To ensure the wire can t be worn 2 Host power access methods Proposal to take power from the battery positive and negative separately device s power input interface have four pins pin 1 pin 2 Ground wire or just connect one pin pin 3 is 6V 32Vpower input due to Car voltage is instability to prevent high anti voltage burned out equipment motherboard proposed access to the fuse pin 4 Access the ignition signal 2 Device power cord should be vertical alignment with other lines to avoid concurrent interference 3 power cord transfer position should use solid state connected way as much as possible and to avoid pull stretch work 4 Line alignment requirements Location need to convenient to the line brought together covert beautiful all the lines plus protective cover 12 HON ES ES 4 System Operating Instruction 4 1 Start System When connect 12V DC power supply to the device the system starts After the system start up completely the POWER indicator will become green and the RUN indicator will be flashing continually There are three ways of starting the system 1 long press the POWER button on the remote control for 5 seconds 2 the ignition signal of the vehicle 3 System sets timing starting system Note th
32. re ACC and timing options The startup mode is default to ACC When select ACC starting and shutdown the system can be started once receiving the ignition signal when select timing starting and shutdown you need to set the time of starting and shutdown in Timing The system will start only when the time set up arrives and there is nothing related to the ACC signal You can also use the POWER key on the remote control to start the device 4 8 2 2 Recoding Setting Used to configure recording parameters which are explained as follows Channel Choose the number of the target channel to be set up Type There are main stream and sub stream for selection Main stream is mainly used for recording setting while sub stream is mainly used for compressing bit stream during network transmission in order to lighten the hardware burden Stream There are two options A V refer to the data stream generated by compressing the video signal and audio signal and V the data stream generated by compressing the single video signal CBR VBR There are VBR and CBR options When set VBR you can configure the image quality BitRate There are 128Kbps 256Kbps 512Kbps 1Mbps unit is bps options The specific limit size of the bit rate will be adjusted according to the scene and the camera condition and the requirement on the image quality FrameRate Full frame rate PAL 25f s NTSC 30f s 20f s 15f s 10f s 5f s 2f s 1f s Resolution Wh
33. rs while the non admin users can only modify their own login password but cannot add modify or delete user right gt Delete User Enter the User operation interface click left mouse button or press the 1 OK button on the remote control to select the user which needs to be deleted in the user selection box click the Delete button to delete the specified user 4 8 1 3 Restore to Default Restore the system configuration parameter to factory configuration the system will auto restart when the restore is complete Note the vehicle information will not be restored to factory configuration after restoring to 20 HON ES ES default facilitating the user to save the vehicle information 4 8 1 4 Clear Alarm Manually clear all the alarm output When the alarm is cleared successfully the system will prompt Alarm has been cleared successfully confirm and return to the page of management tools 4 8 1 5 Software Update gt Manual update system supports USB update copy the update file to the root directory of the USB disk insert the USB disk then click OK to upgrade the system manually gt Auto update insert the USB disk with upgrade file first when the system restarts it will detect the update program If the version number of the update program is different from the one in the system the system will auto update After successful update the buzzer will prompt and system will auto re
34. rwise it will be recording continuously Remind for manual record operation the user is required to have Record operation authority Before carrying out this operation please confirm with the administrator that the DVR has been installed a HDD which has been formatted correctly 17 HON ES ES 4 8 Menu The menu includes Tools management tools Setup system setup PTZ PTZ control Log log search Shutdown shutdown system Timing timing switch Bus Info bus information etc 4 8 1 Tools Including HDD HDD management User user management Default restore to default Clear clear alarm Update software update Time date and time Export import and export configuration and Info system information 18 HON ES ES 4 8 1 1 HDD Management Check the current status capacity and the remaining space of the specified HDD and if the HDD was formatted Format used to format the specified HDD or the SD card Unplug the SD card before unplugging the SD card uninstall the software in order to avoid damage to the SD card or SD data clicking for unplugging the SD card it has to be unplugged within 10S otherwise the SD card will be auto mounted after 10S Note the system will restart when the SD card is unplugged illegally Note 1 the new HDD or SD card installed can only be used after being formatted 2 the recording has to be stopped before the HDD formatted 4 8 1 2 User
35. sful link could testing 1 Ping the host side IP address To see whether it is a successful connection 45 HN LIB co BUD ESSE 2 Confirm the password settings correct 10 Why is there only audio but no video when the client plays the recording file A Because the DirectDraw acceleration is not enabled The enable method is input dxdiag in the running interface open DirectX diagnostic Tool select Show Enable the DirectDraw acceleration in the DirectX function It is shown as the below picture REAJI ICES debba Internet WIRMS hs Windows HOMER E DirectX E BLA R amp 15 IA P Asa Re 2Eshiz FF ZER Intel R 829456 Express Chipset Family 36558 ialmrnt5 dll ET Intel Corporation REA 6 14 0010 4395 Gas GE ED DAEM Intel R 82945G Express Chipset Family A A 2005 9 20 10 52 38 DAC 2538 Internal WHOL 5 Ba hit Aim 128 0 MB H VDD ialmnt5 sys Sira 1280 x 1024 32 bit 60Hz VDD tih 03 2076004538 DDI RES 9 E DirectX IHE DirectDraw IME BSA Wi DirectDraw lI Direct3D ME ZAA Wilizi Direct3D E AGP SEE AA iB eM S Mix DirectDraw THRE ABE Mid DirectDraw f amp tH Sj Direct3D Inf BREA JL Direct3D fZtH a ome 46
36. soft keyboard c change the selected status in the motion detection area setting and blind area setting 3 PTZ To enter the PTZ control interface o 4 MENU d call out main menu e used to exit the soft keyboard f used to clear all the area setting 5 MULTI used to set 4 picture view 6 SHIFT used to display hide control bar when playback 7 ESC exit menu 5 0 enter manual record setting interface in order to set manual record 9 Play in the middle of the fourth line counted from the end used to enter the file and search page in order to play recording file 10 VOIP the shortcut of the backspace key in the soft keyboard select all when set motion detection setting area 11 MUTE sound mute setting when playback 12 OK when there is no menu press OK key to display system information 10 HON ES ES 3 install instruction 3 1 Host machine Installation Notes To ensure the use safety of the Car DVR extend the equipment use life customers need to fully consider the following factors when install 1 when install and operate the equipment comply with all electronic products specification as well as vehicles and other connected devices requirement 2 power supply and grounding 1 Device power input range DC 6V to 32V please note don t reversed the output can t be short circuit Please note the supply capacity of the power cord 2 Even if the device is turned off the machine also charged need to avoid short
37. start if the version number of the update program is the same as the one in the system it will not update gt MCU update can only adopt auto upgrade Note the name of the system upgrade file is MDVRB v version Bin the name of the single chip upgrade file is mpanel version Bin When upgrade is complete the system will auto restart 21 HON SE Bo BUD ES 4 8 1 6 Date and Time Enter the time page of the system you can modify the time of the system and the time format Note the time can be modified when recording is stopped 4 8 1 7 System Information Display system related information mainly include device name model number MCU model number and software version Note under preview mode press OK button on the remote control can display this interface directly HON SE Bo BUD ES 4 8 1 8 Import and Export Used to export the system configuration to the USB disk or import the system configuration from the USB disk in order to facilitate configuring multiple devices in batch There are two ways of import D manual import insert the USB disk with configuration file click OK after successful import the system will restart There will be sound prompting after successful import 2 Auto import configuration file insert the USB disk with configuration file when the system starts it will auto import the configuration file There will be sound prompting after successful import and th
38. te control you can single preview the corresponding channel Four channel preview press the Multi key on the remote control or single click the left mouse button it can return to four picture preview status 4 6 Playback 1 Enter the playback operation interface For four channel preview interface press the PLAY key on the remote control for the main menu interface press the OK key on the remote control or click the left mouse button on Playback can enter the playback operation interface directly 2 File search interface instruction System supports searching recording file by channel number recording type and start and end time gt File search Search the recording files which meet the search conditions and they will display in the structure list Note if the recording files which meet the search conditions are more than 4000 items the system will only display the first 4000 items To search the update file please modify the search condition gt Play by time to playback all the files within a specified time period you can select single channel or multi channel You can playback 4 channels using this button 15 HON SE Bo BUD ES Backup by time backup all the files within a specified time period to the specified device 3 File search results interface instruction Y VV V WV Playback the specified file left click the left mouse button on the specified file or click the OK button on th
39. vice Used to set timing start or shutdown device There are four time periods can be set and within each time period you can set the time of start and shutdown every day When the System Parameters in boot type choice time the system will automatically shut down at the timer turn off time Onlyto thetimer bootsettings time the system will boot HDD lock also could boot When the System Parameters in boot type choice ACC after timer turn off the system will automatically boot do not wait until the timer boot time to boot only when ACC is flameout state the system will shut down after delay 4 8 7 Bus Information DevicelID Used to set the ID number of every device DeviceName Used to set the device name which is the same as the device name set up in Info BusNo Used to set the bus number of the vehicle facilitating management Note All information in this item can t be restored to the factory setting but you can manually modify the relevant information 33 HON ES ES 4 8 8 Overlay Setting Preview Used to set up whether to display time channel number bus number and if there is flashing prompting when video loss under preview mode Open means display this item when preview while Close means not display this item on the interface when preview Recording Used to set up whether to display time channel number and bus number in the recording file Open means display this item
40. will automatically play the next paragraph Backup function support single file backup and multiple files backup by time the backup file supports two kinds of formats ifv and avi formats File clip function you can clip one section of the recording file according to the needed start and end time The clip file supports ifv and avi formats o Log search function can search and display the storage medium or the log files stored in local 38 HON ES ES Ta 10 11 The search and playback function of the local recording file support search and playback the local recording file by car number and by start and end time Data empty function used to empty the recording files in the storage medium HDD or SD card full screen display function Playback interface click the full screenbutton Full screen playback the video files 66 22 66 i 66 response keyboard operation lt jump to one minute before the the video file to start playing 66 22 gt 16 times speed to play the video files Return to normal speed playback GPS Track display When use the player to play video If the video has GPS information click GPS button The location and trajectory of the vehicle will be displayed in the pop up map If the video file does not have GPS information click GPS button GPS positioning location will be displayed in the pop up map 5 4 Client Operation Introduction This clie
Download Pdf Manuals
Related Search