CP5-Series User Manual
Contents
1. DZ3 600 Manual I Operation 1 Place the scale on a flat level surface and press the ON OFF key to turn the scale on 2 Once the start up process completes and the scale goes to zero you are ready to weigh 3 Place the quantity to be weighed onto the weighing platform 4 Wait a couple seconds for the display to stabilize before taking a weight reading Il Changing the Unit of Measure 1 Press the MODE key to change the scales displayed unit of measure 2 If the scale is turned off then back on it will default to the last unit used DZ3 100 Units g gram oz ounce ct carat gt gn grain DZ3 600 Units g gram oz ounce ozt troy ounce dwt pennyweight lll Using the Tare Feature You can use this scale s tare feature to subtract the weight of an empty container or vessel for net weight determination NOTE The weight of the container will subtract from the available capacity 1 Place the empty container or vessel on the weighing platform 2 Press the TARE key once The display will then reset to zero If the container is removed it s weight will be displayed as a negative number 3 You may now fill the container with the quantity to be weighed The display will show the net weight of the contents 4 To return to normal weight display gross weight remove any items from the weighing platform and press the TARE key again to re zero the scale IV Calibration Adjustm2. ent 1 Turn the scale on by pressing the ON OFF key 2 Wait for the display to show 0 0g or 0 00g then press and hold the MODE key until the display shows CAL then release 3 Press the MODE key again The display will flash CAL followed by the required calibration weight 4 Place the required calibration weight on the center of the platform The display will show PASS then return to normal weighing mode Calibration is complete You may now turn the scale off V Error Codes 1 OUTZ Zero range has shifted Perform calibration adjustment If the problem persists the load cell may be permanently damaged due to overloading 2 88888 Maximum capacity exceeded Remove the extra weight to avoid damaging the load cell 3 L Batteries are low Replace the batteries VI Specifications DZ3 100 DZ3 600 Max Capacity 100g 600g Readability 0 01g 0 1g Min Weight 0 03g 0 2g Two 2 AAA Batteries Dimensions 3 0 x 5 0 x 0 8 in Platform Dimensions 2 5 x 3 0 in For warranty and support please email warranty digitzscales com
Download Pdf Manuals
Related Search