ME.80-14/6ASW-KTE CCTV CAMERA BUFFERABLE POWER
Contents
1. ME 80 14 6ASW KTE CCTV CAMERA BUFFERABLE POWER SUPPLY DISTRIBUTION UNIT USER S MANUAL ATTENTION Touching of mains terminal after power connection is dangerous Use of protective earthing is compulsory for safety purposes The connecting information is in the label of the power supply Use appropriate wire size on the OUT connection Ore WORKING MODES HE ele 1 Normal mode 12 V output default Drea aple Connect mains to connector AC IN 230 V 50 60 Hz Connect output EA ii yz LOAD Pay attention to the proper polarity Connect the cameras to H Hes OUT 1 OUT 10 output If the measured voltage at the cameras is ols dropped e g too long wire increase the output voltage Zz EE oy using trimmer potentiometer on the panel Measure always the voltage os Hee gi at the camera power input o D o o OUT current each max 1 A With resettable PTC OUT current together max 6 A OUT voltage 12 V to 13 8 V adjustable STATE LED operation Output is OK load continuous or flashing green Output is overloaded continuous or flashing red 2 Buffer power pupply mode Connect mains to connector AC IN 230 V 50 60 Hz Connect output BAT to battery with wire and output LOAD to load Pay attention to the proper polarity Adjust the voltage on output BAT to 13 8 V by trimmer potentiometer Connect the cameras to output OUT 1 OUT 10 ATTENTION The output voltage is 13 8 V in this case Install ME 12V 1A power supp2. ly unit into the house of camera which gives 12 VDC with max current 1 A The charging procedure of the battery is automatic I U characteristic no intervention is needed In case of power cut the battery deep discharge and break down is prevented by switching off loading at 10 5 V decreased battery voltage After returning of power the charging process starts If the charging voltage reaches 12 5 V on the battery the loading 1s reconnected This solution is working with safe and avoiding possible trouble Connection of battery red black OUT current each max 1 A With resettable PTC OUT current together max 5 5 A OUT voltage 13 8 V STATE LED operation Output is OK load flashing green Battery mode flashing green red Battery deep discharge flashing red Specifications Built in protections against Input voltage 230 VAC 10 50 60 Hz Overloading Output voltage 12 to 13 8 VDC adjustable Short circuit Max loading current 6 A Overheating Class of insulation I Overvoltage Degree of protection IP 20 Deep discharge Ambient temperature limit range 10 C 4 50 C Changed polarity at battery by fuse Max battery size 12V 7Ah Dimensions W 215 H 265 D 70 8 mm
Download Pdf Manuals
Related Search