Manual - KanexPro
Contents
1. 9 Warranty KanexPro warrants that a its products the Product will perform greatly in agreement with the accompanying written materials for a period of 3 years from the date of receipt and b that the product will be free from defects in materials and workmanship under normal use and service for a period of 3 years B CUSTOMER REMEDIES KanexPro s entire liability and Customer s exclusive remedy shall be at KanexPro option either return of the price paid for the product or repair or replacement of the Product that does not meet this Limited Warranty and which is returned to KanexPro with a copy of customers receipt This Limited Warranty is void if failure of the Product has resulted from accident abuse or misapplication Any replacement Product will be warranted for the remainder of the original warranty period or 90 days whichever is longer C NO OTHER WARRANTIES TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW KANEX DISCLAIMS ALL OTHER WARRANTIES EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WITH REGARD TO THE PRODUCT AND ANY RELATED WRITTEN MATERIALS THIS LIMITED WARRANTY GIVES CUSTOMERS SPECIFIC LEGAL RIGHTS CUSTOMERS MAY HAVE OTHER RIGHTS DEPENDING ON THE JURISDICTION D NO LIABILITY FOR DAMAGES TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW IN NO EVENT SHALL KANEX BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING2. HDMI Pro Transmitter Y OUT Connect with IR Emitter and the sending IR signal is received from HD Transmitter IR INSOUT Serial port 3p captive screw connector connects with the control terminal to control the controlled terminal supports qee bi directional RS232 control between the transmitter HDMI Transmitter and the receiver HD Receiver Connect with a DC 24V power adapter Not necessary if HD DC 24V Transmitter connects with power adapter HDBASE100POEL Extender 2 3 Twisted Pair Cable Connection The twisted pair used in HDBASE100POEL Extender MUST be a straight through cable The connectors can be T568A or T568B but both sides must be the same TIA ElA T568A TIA EIA T568B Pin Cable color Pin Cable color 1 green white 1 orange white 2 green 2 orange 3 orange white 3 green white 4 blue 4 blue 5 blue white 5 blue white 6 orange 6 green 7 brown white 7 brown white 8 brown 8 brown 1st 1st Ground Ground 4 2nd 2nd Ground 276 Ground 1 3rd 3rd Group i Group oa 4th 4th Group is Group is 3 System Connection 3 1 Usage Precautions Please cut off the power of the HDMI source device and the output displaying device before accessing with Extender as it may damage to Extender Ensure that all connections including the power cord are done before turning on the power to work with Extender HDBASE1
3. WITHOUT LIMITATION SPECIAL INCIDENTAL CONSEQUENTIAL OR INDIRECT DAMAGES FOR PERSONAL INJURY LOSS OF BUSINESS PROFITS BUSINESS INTERRRUPTION LOSS OF BUSINESS INFORMATION OR ANY OTHER PECUNIARY LOSS ARISING OUT OF THE USE OF OR INABILITY TO USE THIS PRODUCT EVEN IF KANEX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES KanexPro Brea California KanexPro com MPN HDBASE100POEL HDMI amp HDBaseT are trademarks or registered trademarks of HDMI Licensing LLC amp HDBaseT alliance in the United States and other countries KanexPro is a registered trademark of Apogee Inc registered in the U S
4. still the same after the above checking maybe there is something wrong in the extender Please send it to the dealer for repairing If the static becomes stronger when connecting the video connectors it probably due to bad grounding please check the grounding and make sure it connected well otherwise it would damage the extender If the extender cannot be controlled through the RS232 port or by the IR remote the unit may have already been broken Please send it to the dealer for repairing 10 HDBASE100POEL Extender 7 Safety Operation Guide In order to guarantee the reliable operation of the equipment s and safety of the staff please abide by the following proceeding in installation using and maintenance 1 2 3 4 5 6 7 The system must be earthed properly Do not use two blades plugs and ensure the alternating power supply ranged from 100v to 240v and from 50Hz to 60Hz Do not put the device in a place of too hot or too cold As the power generating heat when running the working environment should be maintained fine ventilation in case of damage caused by overheat Cut off the general power switch in humid weather or left unused for long time Before following operation ensure that the alternating current wire is pull out of the power supply e Take off or reship any components of the equipment e Take off or rejoin any pin or other link of the equipment As to non professional or without
5. 00POEL Extender 3 2 System Diagram IR Transmitter IR Signal Rs232 control signal Figure 3 System Diagram 3 3 Connection Procedure Step1 Connect HDMI source such as DVD player to HDMI IN port of the transmitter with HDMI cable Step2 Connect HDBT OUT port of HD Transmitter and HDBT IN port of HD Receiver with single CAT5e cable Step3 Connect HDMI displayer such as HDTV to HDMI OUT port of HD Receiver with HDMI cable Step4 Both HD Transmitter and HD Receiver have IR IN and OUT When one model use for IR signal receiver the other model must send out the IR signal For example When IR IN of HD Transmitter connects with an IR receiver the IR Emitter must be connected to IR OUT of HD Receiver Step5 To set as a LAN one of the four ETHERNET ports of HD Transmitter and HD Receiver should be used for Internet access and the others can be connected with computers Step6 Connect the RS232 port of the computer and the RS232 port of HD Transmitter or HD Receiver any one is able to work as the RS232 signal can be transmitted bi directionally by using a RS232 cable Step7 Connect with DC24V power adaptor s Any end of HD Transmitter and HD 6 HDBASE100POEL Extender Receiver connecting with power adapter is enough with its POC function 3 4 System Applications As its good performance in control and transmission HDBaseT Extender can be widely used in computer realm monitoring large scre
6. I DC 24V Connect with a DC 24V power adapter Not necessary i Pro Receiver connects with power adapter HDBASE100POEL Extender 2 2 Product Appearance of HD Receiver EEL ON LINK OUT tt THERNET HOBTIN HOMIOUTLIRIN IROUT RS232 Di fi eT 00000 Figure 2 Interfaces of HDMI Pro Receiver a No Name Description Y Out When connected with device which supports HDCP and works normally this LED will keep on If the device Out does not support HDCP the LED will blink o Link v Link Twisted Pair Link status indicator It will keep on when On connection is successful Power v On Used to show the working status blinks when in normal working state turns off when stop working Y Power Turns red and keep on when power on Ethenet ports when need to work in a local area network one of these 4 ports both the Ethernet ports of HD Transmitter and HD Receiver should be used for internet access and the O ETHERNET others can be connected with computers If they are well connected the yellow LED indicators on the corresponding ports will keep blink and the green ones will keep on when working To connect with the HDBT OUT port of HD Transmitter by using HDB TIN a single CAT5e cable 90m length in max a HDMI OUT HDMI output port connect with an HDMI displaying device Y IN Connect with IR receiver the IR signal received from this port can only send out in
7. IR RS232 signal transmitted over single CAT5e CAT6 twist pair Max transmission distance is up to 90 meters for 1080P signals Max transmission distance is up to 35 meters for 4K X 2K signals Support Ethernet expanding HDTV Compatible use HDMI 1 4a and HDCP compliant Support 1080P 1080i 720P 576P 576i 480P and 480i High quality output video signal with 24bit 36bit deep color Bi directional RS232 controls Bi directional IR controls LED indicators show work status Wall table mountable aluminum enclosure Note Please use a CAT5e 6a cable with low impedance Shielded twisted pair will be better and should be well grounded for good transmission effect 1 3 Package Contents gt 1x HDBASET Transmitter 1 x HDBASET Receiver 4 x Mounting ears Separated from HD Transmitter and HD Receiver 1 x Power adapter DC 24V 3A 2 x IR Emitter MYS 003B 3 5mm plug not included buy it separately VVV Y 1 HDBASE100POEL Extender 2 x IR receiver TSMP1138 3 5mm plug not included buy it separately 2 x RS232 cable 8 x Screws 3 6mm 1 x User manual VVV V Notes Please confirm if the product and the accessories are all included if not please contact with the dealers HDBASE100POEL Extender 2 Introduction of Product Appearance 2 1 Product Appearance of HD Transmitter T Pot ON LINK IN a ra HDBTOUT HOMI IRIN i 1 e Figure 1 Interfaces of HDMI Pro Transmitter No Name Description v
8. KanexPro HDBaseT100 Meter HDMIO Extender w Power over Ethernet HDMI IR RS232 Ethernet Twisted Pair Over Single Cable All Rights Reserved by KanexPro Version HDBaseT Pro Extender_2014V2 0 HDBASE100POEL Extender NOTICE Please read this user manual carefully before using this product This manual is only for operation instruction only not for any maintenance usage The functions described in this version are updated till April 2014 Any changes of functions and parameters since then will be informed separately Please refer to the dealers for the latest details All rights reserved No part of this publication may be copied or reproduced without permission Update History Version Date Update Content 1 0 2014 02 22 First version 2 0 2014 04 12 Update version HDBASE100POEL Extender oO Table of Contents Introduction Shien nla an i ee ee ed eed it 1 1 1 Introduction to HDBaseT Pro Extender ecceeceeeeeeeeeeneeeeeeeeeesnaeeeeeneeeenneeens 1 AEE E sac O 1 ET AAA 1 Introduction of Product Appearance ccccconcnnnnoooooooooonononnnonononononononononcnanannnnnn non nn on corona 3 2 1 Product Appearance of HDMI Pro Transmitter occccnnnnnnicicocooooonnnncnonononononnnoss 3 2 2 Product Appearance of HDMI Pro RecelVer ccccccncnnnnicnnonanononanonnnnonononononononoss 4 2 3 Twisted Pair Cable Connection c ooooooccccnnonocccnonnnoncccnnno nn crono nana nnnnnnn nn ra
9. On Used to show the working status blinks when in normal working state turns off when stop working On v Link Twisted Pair Link status indicator It will keep on when O Link connection is successful In Y In When connected with device which supports HDCP and Power works normally this LED will keep on If the device does not support HDCP the LED will blink Y Power Turns red and keep on when power on Ethenet ports when need to work in a local area network one of these 4 ports both the Ethernet ports of HD Transmitter and HD Receiver should be used for internet access and the a ETHERNET others can be connected with computers If they are well connected the yellow LED indicators on the corresponding ports will keep blink and the green ones will keep on when working To connect with the HDBT IN port of HDMI Pro Receiver by HDBTOUT using a single CAT5e cable 90m length in max a HDMI IN HDMI input port connect with an HDMI source device Y IN Connect with IR receiver the IR signal received from this port can only send out in HD Receiver Y OUT Connect with IR Emitter and the sending IR signal is received from HDMI Pro Receiver IR INSOUT Serial port 3p captive screw connector connect with the control terminal to control the controlled terminal supports paar bi directional RS232 control between the transmitter HD Transmitter and the receiver HD Receiver l if HDM
10. W Power Supply Input 100VAC 240VAC 50 60Hz Output 24VDC 1 25A Dimension W H D W 5 9 x H1 1 x D3 3 Net Weight 1 78 Ibs 0 8Kg HDBASE100POEL Extender 5 Panel Drawing 30 01 mm 152 00 mm 13 50 mm fm gt e gt 84 00 mm E E o re N 30 00 mm Figure 4 Panel Drawing of HD Transmitter 152 00 mm 14 00 mm 84 00 mm 30 00 mm Figure 5 Panel Drawing of HD Receiver HDBASE100POEL Extender 6 Troubleshooting 8 Maintenance 1 2 3 4 5 6 When there is a color losing or no video signal output maybe the cables have already broken or haven t been connected well When user cannot control the extender by computer through its COM port please check the COM port number in the software and make sure the COM port is in good condition and the communication protocol is correct If a device has connected with an ETHERNET port but the HDBaseT Extender can t recognize it please check whether its IP address is the same with another connected device When switching there is no output image e Check if there is any signal at the input Check if there is any signal at the output We can check these by using an oscilloscope or a multimeter If there is no signal input output maybe the input output cables broken or the connectors loosen please change for another cable Check if the output port number is the same with the controlled one If it is
11. en displaying conference system education and bank securities institutions etc 4 Specification Model Spec Input Signal HDBASE100POET 1xHDMI 1xIR in 1xRS232 HDBASE100POER 1xIR in 1XHDBaseT 1 x RS232 Input Connector 1xHDMI female 1x3 5mm mini jack for IR in 1x3P captive connector 1x3 5mm mini jack for IR in 1xRJ 45 1x3P captive connector 1xRS232 Video Signal HDMI1 4a HDMI1 4a Audio Digital audio transmit Digital audio transmit through HDMI audio through HDMI audio Output AUS AIR SUS 1xHDMI 1xIR out 1xRS232 Output Connector 1xRJ 45 1x3 5mm mini jack for IR out 1x3P captive connector 1xHDMI female 1x3 5mm mini jack for IR out 1x3P captive connector Video signal HDMI1 4a HDMI1 4a Transmission Mode Connector HDBaseT 2xRJ45 2xRJ45 Ethernet Transmission Speed Resolution Range Adaptive 10M 100M max full duplex or half duplex 800x600 1920x1200 3D 4KX2K Transmission Distance Max distance 90m Differential Phase Error 10 135MHz_100M SNR gt 70dB 100MHz 100M Gain 0dB 10dB 100MHz 7 HDBASE100POEL Extender Bandwidth 10 2Gbps Return Lost lt 30dB 5KHz THD lt 0 005 1KHz HDMI Standard Support HDMI1 4a and HDCP Min Max Level lt 0 3V 1 45Vp p Impedance 750 Temperature 20 70 Humidity 10 90 Power Consumption 10
12. n nnnan nn 5 Systemi Connection AE 5 Sali USage PreCaUutiOns ci A da 5 3 2 System DiaQlaM oooooccnnccccnononocncnncnnnnnnnnnnn cnn nnn cnn nan nn r ndean tinar anna rara 6 3 3 Connection Procedure cceccececseeeeeseeceseneeeeeseeeneececeseneesecaneeseneeeeeesaesneaeeeennaes 6 3 4 System Applications ooooocooniccccnncnnococccccononononnnnncnannncconcnnnnn cnn nc nano ncnncanannncnnnaans 7 Special iii ii 7 Panel DAWN AAA AAA i ee a 9 Troubleshooting Maintenance oooooonoccccccccoccoccccccnonancnnnnnnnnnnnnnnnnnn non nnn cnn nnn nn nn cnnnnnnns 10 Safety Operation Guide iio A Aid 11 Aftorsales SOrviCe conocio ideas 12 HDBASE100POEL Extender 1 Introduction 1 1 Introduction to HDBaseT Pro Extender The KanexPro HDBASE100POEL is a transmitter receiver set that enables you to routes ultra high definition signals up to 330 feet 100 meters over single CAT6 cable using HDBaseT Technology This extender also features PoE Power over Ethernet The Extender has an HDMI loop for local monitor out while extending 330 to the receiver side This extender set is fully compliant with the latest HDCP specifications and supports EDID management for proper resolution output up to ultra HD 4K 1080p 60 amp 3D With its Ethernet ports the extender also supports Internet access to work in a LAN 1 2 Features HDBaseT technology High Bandwidth 10 2Gps Support CEC Support 3D Support PoC HDMI
13. permission please DO NOT try to open the casing of the equipment DO NOT repair it on your own in case of accident or increasing the damage of the equipment DO NOT splash any chemical substance or liquid in the equipment or around 11 HDBASE100POEL Extender 8 After sales Service 1 2 3 4 If there appear some problems when running HDBaseT Pro Extender please check and deal with the problems reference to this user manual Any transport costs are borne by the users during the warranty You can email to our after sales department or make a call please tell us the following information about your cases e Product version and name e Detailed failure situations e The formation of the cases We offer products for all three year warranty which starts from the first day you buy this product The purchase invoice shall prevail Any problem is same with one of the following cases listed we will not offer warranty service but offer for charge e Beyond the warranty e Damage due to incorrectly usage keeping or repairing Damage due to device assembly operations by the maintenance company non assigned e No certificate or invoice as the proof of warranty The product model showed on the warranty card does not match with the model of the product for repairing or had been altered Damage caused by force majeure Remarks For any questions or problems please try to get help from your local dealer 12
Download Pdf Manuals
Related Search