DVT-1542 User Manual
Contents
1. 9 Play Pause 10 Remote sensor 11 Power indicator E LE E O E To turn the TV power ON Put the TV set on the correct place then connect the DC plug of the AC DC adaptor to the DC 12V socket at the back of the TV set Connect the adaptor main cord to the wall outlet then the LCD indicator lamp turns red blue and the TV set is at Standby mode At Standby Mode if Standby Button is pressed the power indicator will change to blue It takes a few seconds before the picture appears To turn the TV power OFF Press the Standby Button to make the TV set in Standby Mode then disconnect the power plug from the wall outlet NOTE If TV is the selected input without signal received and NO operation is performed for about 5 minutes continuously the TV set will enter standby mode For any inputs other than TV the TV set will not enter standby mode automatically without users 7 instruction If you are not going to use this TV set for a long time switch off the set and disconnect the power plug from the wall outlet Rear view of the TV G USB pe HDMI lt BD a lt Ha SCART Ci HF Pr Ph YVES NOTE When using external equipment with this TV set please read the instruction manual of the external equipment Switch off all power supplies to the equipment and TV set before connection Always ensure that the input and output terminals are correctly connected Remote control unit AUTO MUTE aAa d SE2. 10 Min 20 Min 30 Min 60 Min 90 Min 120 Min 180 Min 240 Min You can press SLEEP repeatedly on the remote control to change the sleep timer directly Lock menu Press MENU to display the main menu Press lt gt to select LOCK in the main menu then press V and OK to enter Password Enter the default password 0000 to go to the LOCK function menu if you have set Lock System to On io Lock System Press gt or OK toSet the lock system to On or Off which wines or disables below lock functions Set Password Press gt or OK to enter submenu to set new password You can change the password by entering the old and a new password and then re entering it to confirm the new one Block Program Press gt or OK to enter Block Program submenu 1 You can add or release a lock to some special program When watch a locked program a dialogue box appears You should enter the correct password The initial password is 0000 If you forget your password input 2588 2 Press rename button to lock the desired channel press it again to unlock it Parental Guidance For DTV only Press gt or OK to enter Parental Guidance submenu Press A F to set the parental guidance level Option menu Press MENU to display the main menu Press lt P gt to select OPTION in the main OSD Language menu then press V and OK to enter arena AG E gitara Lad PVR File System OSD Lan
3. MENU to display the main menu Press lt gt to select SOUND in the main menu then press V and OK to enter SOUND Sound Mode Press WV and OK to enter Sound Mode submenu Press lt gt to change the sound mode in sequence Standard Music Movie Sports User You can press SMODE repeatedly on the remote control to change the sound mode directly Press A V to adjust treble hass in user mode Balance use the same way as above Auto Volume Press V or OK to set the automatic volume level to On or Off SPDIF Mode Press V or OK to set the SPDIF mode to Auto or PCM Surround Sound Press W A button to select Surround Sound then press button to enter sub menu Press W A button to adjust Available Surround Sound Off Surround EQ Press W A button to select EQ then press OK button to enter submenu Press W A button to select Press W A button to adjust Available EQ 120Hz 500Hz 1 5KHz 5KHz 10KHZ 12 Time menu Press MENU to display the main menu Press UP to select TIME in the main menu then press V and OK to enter Clock For DTV only Display the current system time It s not available Time Zone For DTV only Press gt or OK to enter Time Zone submenu Press A W lt to set the proper time zone according to your region Sleep Timer Press gt or OK to enter Sleep Timer submenu Press A F to change the sleep timer as Off
4. display The following menu items can be changed GENERAL Selects the GENERAL SETUP PAGE menu AUDIO Selects the AUDIO SETUP PAGE menu PREFERENCE Selects the PREFERENCE SETUP PAGE menu 14 1 Press V A 4 P buttons to select submenu and change it in General setup page ESSIENS 4 3 PS 2 Use the same way to change other submenu Saar Bada in AUDIO and Preference On Off Troubleshooting Before calling for service you can check the following items on symptoms and solutions No picture Check other channel maybe station problem Adjust the tuning control Ensure that the input setting is at TV state Ensure that the LCD is on Ensure that the equipment is connected properly No sound and distorted sound Ensure that the input settings for the TV and sound are proper Adjust the tuning control Probably local interference such as an appliance Re orient aerial if indoor type Ensure that the equipment is connected properly No remote Control Check the battery are installed with the correct polarity Point the remote control unit at the remote control sensor and operate Remove the obstacles between the remote control and the remote control sensor Operate the remote control unit at a distance of not more than 8 meters from the remote control sensor NO SIGNAL displayed Check if the wire is connected correctly Ensure the computer or other equipments are at power on mode Ensure the TV input setting is at
5. s Signat information menu then press V to select and OK to enter Auto Tuning Press W and OK to enter AUTO Tuning and press A B V 4 to select a language and press OK to start DTV Manual Tuning Press V and OK to enter DIV Manual Tuning submenu Press lt gt to change channel number then press OK to search programs ATV Manual Tuning Press V and OK to enter ATV Manual Tuning submenu Press lt gt button to select channel number you want to store Press A V button to select the second option Press lt gt button to select audio system Press A V button to select search then press lt gt button to start tuning Press RED button to save the current channel Programme Edit Press W and OK to enter Programme Edit submenu This option has five functions 1 Press DEL button to delete the current channel 2 Press RENAME button to rename the current channel For ATV only 3 Press MOVE button and A F to move the current channel 4 Press SKIP button to skip the current channel 5 Press FAV to set the current channel to your favorite channel there will be a red heart at the behind of the channel selected If the current channel is already be one of your favorite channel press it again will set it to a normal one 11 Cl Information Software Update USB DTV Manual Tuning UHF CH 12 gt No Signal ad Freq 226 25Mhz Good BERERE ER AM T 50
6. E ES S E30 a 8 1 A 8 8 8 E 30 D Fs E89 ATV Manual Tuning gt System DK Current CH 1 Search Fine Tune Frequency 74 50 MHz Save s Menu Programme Edit 1 7 Digital 2 7HDDigital 3 7 Digital 1 nw 4 7 Digital 2 5 7 Digital 3 6 AFD0 16 9 7 AFDO 4 3 8 AFD1 169 Om 9 AFD1 4 3 no 10 AFD2 16 9 d Delete Rename Move Skip Favorite o Te eX Menu Signal Information For DTV only Press W and OK to enter Signal Information submenu This menu displays signal details including Channel Network Modulation Quality and Strength Picture menu Press MENU to display the main menu Press UP to select PICTURE in the main Picture mode Standard menu then press V and OK to enter Crier aa Aspect Ratioa Noise Reduction PICTURE Picture Mode Press V and OK to enter Picture Mode submenu Press lt gt to change the picture mode in sequence Standard Dynamic Mild User You can press PMODE repeatedly on the remote control to change the picture mode directly Colour Temp Press gt or OK to enter Colour Temp submenu Press A F to change the colour temperature in sequence Warm COOL USER Medium Press lt gt to adjust contrast Brightness colour tint sharpness in user mode Noise Reduction Press V or OK to enter Noise Reduction submenu Press o p to change the noise reduction in sequence Off Low Middle High Sound menu Press
7. pc mode INVALID FORMAT displayed Check if the input setting is compatible to the monitor specification Lcd lamp indicator on but no picture Check the monitor setting contrast brightness Check if the wire is connected correctly oome unusual spots on screen Some dot defects may appear on the screen like red green or blue Spots However this will have no impact or effect on the monitor performance Lost password On the password screen enter the following master password 8888 You may use the master password to set a new password as desired Please remember your password and keep it carefully 15 Service and support Lenco has written this user manual with the utmost care If you still have difficulties using this product after you have read user manual than you can contact us via www lenco eu or by phone Lenco helpdesk Germany 0900 1520530 Local charges The Netherlands 0900 23553626 Local charges 1ct P min Belgium 026 200115 Local charges France 017 0480005 Local charges The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM In case your device needs repair our helpdesk will redirect you to your local dealer Lenco offers service and warranty in accordance to European law which means that in case of repair both during and after the warranty period you should contact your local dealer Please note it is not possible to send repairs to Lenco directly Important note If the unit is opene
8. DV T 1542 39 CM 15 4 LCD TV WITH INTEGRATED DVD PLAYER DVB T AND CI User Manual For information and support www lenco eu Table of content Whats Inde DON ssiri eneee eaei ne eae aia na iaaea 3 Salety ado o AA AA AA LP Re ZEN DER KP EE aaor 4 IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY BEFORE USE 4 ALE EL CA AA 7 TOD VEW OFRE TY aea a AA Aang 7 wies mA opis 7 Toturnthe TY POWER ON e caster aches hale 7 Totun AN AA 7 Rear NS VO Naa 8 Remote CONN Ripe E 9 IRA m 11 AINE T Real AA AA 11 PIGIUTO ETE gE oeconomia utu uncut crate cuum NG ae eer 12 SOUNO m ETT S S LUDUM 12 disc 0 pt MH ear 13 LOCK MONU Ed 13 OPO NMEN T STE 13 AWSCART YPBPRUB irssi ainese eieae din tg akala ind to edie we ede te siete eee 14 USB OPperatiON AA 14 Inital Setiings DVD ANAN NINE ANNA NE EAT eee NA KANA KANG 14 AE GRO TOS FOOTING NE EDS 15 Service ANG SUPPON ENERO S 16 MOC INI CAMION S AA AA AA AA AA 16 Personal MOUS EE 17 NGO AA 18 Dear customer Thank you for purchasing this Lenco product Quality and usability is our top priority In order to let you fully enjoy this product we manufactured this product using high quality standards materials components and care Note This user manual is printed prior to the product development When a part of the product specification m
9. TUP SOURCE nec reet SMODE SLEEP BTW FAV FAV EPG TEXT HOLD TV RADIO SUBTITLE INDEX SIZE REVEAL SUBPAGE PROG RENAME REPEAT STANDBY Switch on TV when at standby mode AUTO Press to do auto configuration directly in PC source MUTE Press to mute the sound Press again or press VOL to unmute 0 9 Press 0 9 to select a TV channel directly when you are watching TV To enter page number in teletext mode and so on for 1 for 11 Press this button to enter a program number with different digits eg for 111 C2 Returns to the previously viewed program CH Press to scan through or to select a channel VOL Press to increase decrease the sound level ASPECT To select the aspect of screen NICAM Change audio mode in ATV source Stereo Dual I II Mono Change audio mode in other source Left Right DISPLAY Press to display the source and channel s information V A 4G B K Allows you to navigate the on screen menus and adjust the system settings to your preference MENU Brings up the main menu to the screen EXIT Press EXIT to exit menu or sub menu SOURCE Press to select the input source PMODE Press repeatedly to cycle through the available video picture modes SMODE Press to cycle through the different sound settings SLEEP Let you select amount of time before your TV turn itself off automatically FAV Press to display FAV menu in TV mode FAV Press to select the channe
10. amp cloth Do not cover or block any ventilation openings When placing on a shelf leave 5 cm 2 free space around the whole unit Install in accordance with the supplied user manual Protect the power cord from being walked on or pinched particularly at plugs and the point where it exits the unit Do not place heavy items on the power cord which may damage it Take note that the power cord cannot be reached and pulled by young children avoiding injury Unplug this unit during lightning storms or when unused for a long period of time Keep the unit away from heat sources such as radiators heaters stoves candles and other heat generating products WARNING NEVER INSERT AN OBJECT INTO THE PRODUCT THROUGH VENTS OR OPENINGS HIGH VOLTAGE FLOWS IN THE PRODUCT AND INSERTING AN OBJECT CAN CAUSE ELECTRIC SHOCK AND OR SHORT INTERNAL PARTS FOR THE SAME REASON DO NOT SPILL WATER OR LIQUID ON THE PRODUCT Do NOT use in wet or moist areas such as bathrooms steamy kitchens or near swimming pools Do not use this unit when moisture condensation may occur SAFETY PRECAUTIONS continued This unit has been produced according to all current safety regulations The following safety tips should safeguard users against careless use and the dangers connected with such use Although this unit has been carefully manufactured and rigorously checked before leaving the factory as with all electrical appliances it is possible for problems to de
11. back ll Button Press this button to stop DVD player TITLE button DVD disc Press TITLE button then you can use gt and OK button to select programs VCD disc Press TITLE button you can switch PBC on off ZOOM Press ZOOM during playback or still playback to activate the Zoom function Note Zoom may not work on some DVDs ANGLE If the disc contains scenes recorded at different camera angles you can change to a different camera angle during playback Note The angle indicator will blink on the TV screen during scenes recorded at different angles as an indication that angle SLOW Button Press this button during playback to activate the slow function D MENU Button If play some DVD discs press this button back to root menu screen PROG Button Place a track on the program list SUBTITLE Button To press this button you can change the subtitle language from one selected to the initial settings to a different language if available AUDIO Button To press this button you can change the audio language from the one selected at settings to a different language if available DVD SETUP Button Accesses or removes setup menu D DISP Button To display player OSD GOTO Button Press this button to go to desired position A B Button Press this button to repeat sequence 10 TV Mode CHANNEL menu Press MENU to display the main menu Auto Tuning DTV Manual Tuni Press lt gt to select CHANNEL in the main a
12. d by a non official service center the warranty expires Specifications Pal secam Video System Soundsystem Soundsystem Basic functions PAL INTSC SECAM see eeeeee 480i AA TOL TUS 576i 576p 720p 1080i 1080p 480i 480p 576i 576p 720p 1080i 1080p 16 SCART CVBS 8 RGB PC IN Earphone input 0 2 2 0Vrms CVBS L R RCA input 0 2 2 0Vrms Speaker output 2x2 5W THD N lt 10 DC 12V 4A Power ON 26W Standby 1W consumption Panel Viewing angle Hor 45 vert 45 Personal notes 17 End of life This symbol indicates that the relevant electrical product or battery should AE Not be disposed of as general household waste in Europe To ensure the correct waste treatment of the product and battery please dispose them in EX accordance to any applicable local laws of requirement for disposal of T X electrical equipment or batteries In doing so you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste Waste Electrical and Electronic Dnem Equipment Directive When you see a crossed out wheeled waste container on the product it means that the product is subject to the EU directive 2002 96 EC 18
13. e good Care of the remote control do not drop To clean the TV use a soft dry cloth Do NOT use solvents or petrol based fluids For stubborn stains you may use a damp cloth with dilute detergent CD Before playing clean the DVD CD with a cleaning cloth Do not expose the DVD CD to direct sunlight or heat sources such as hot air ducts Do not leave itin a car parked in direct sunlight as there can be a considerable rise in temperature inside of the Car Do not stick paper or stickers on the DVD CD nor scratch the DVD CD After playing store the DVD CD in its case Scratches dirt or fingerprints on the DVD CD may cause tracking errors or skipping lf the player is moved directly from a cold to a warm location or is placed in a very damp room moisture may condense on the lens inside of the DVD CD player section Should this occur the player will not operate properly In this case Remove the DVD CD and wait about an hour for the moisture to evaporate This DVD CD player is designed to be played on a stable vibration free position If you bump the set during DVD CD play the music will stop or skip for a few seconds This is normal for this type of player Safety instructions continued Scratched discs If your disc is badly scratched it will not play You may be able to repair the disc if you use a disc polisher Cleaning the Lens If the lens becomes dirty it may cause a skipping of sound dur
14. guage Press A F W 4 to set the NAY AU ste on screen display menu language TT Language Press lt gt to set the teletext 13 language Hearing Impaired For DTV only Press gt or OK to set the hearing impaired to On or Off Restore Factory Default Press A V button to select Restore Factory Default then press OK button to enter a dialogue Press 4 button selecting Yes to restore factory default by choosing OSD language country and conducting Channel Tuning AV SCART YPBPR PC HDMI Notes 1 PICTURE SOUND TIME AND OPTION menu and description are the same as that for DTV mode 2 No Channal and Lock menu USB Operation Press lt gt button to select MOVIE in the main menu then press OK button to enter Press lt gt button to select drive disk you want to watch then press OK button to enter Press A BB V 4 button to select the file you want then press OK to select and press button to play on the remote controller Press EXIT button to return to the previous menu and exit menu to quit NOTE THE OPERATION OF PHOTO MUSIC AND TEXT SAME AS MOVIE PVR OPERATION In DTV mode puls your usb device to the TV set Press the 6 button to record and press W button to stop Inital Settings DVD COMMON PROCEDURES OF INITIAL SETTINGS Press DVD SETUP button to get the setup menu Use direction buttons to select the preferred item After finishing settings press DVD SETUP again to TV
15. ing DVD CD operation Clean the lens with a commercially available lens cleaner and blower or carefully wipe it with a soft dry cloth IMPORTANT NOTE The USB memory stick should be plugged into the unit directly Don t use an USB extension cable because it can cause interference resulting in failing of data WARNING long term exposure to loud sounds may lead to temporary or permanent hearing impairment Declaration of Conformity Products with the CE marking comply with the EMC Directive 2004 108 EC and the Low Voltage Directive 2006 95 EC issued by the Commission of the European Community Where to install Locate the television away from direct sunlight and a strong light soft indirect lighting is recommended for comfortable viewing Use curtains or blinds to prevent direct sunlight falling on the screen Place the TV on a sturdy platform of which the surface should be flat and steady This will prevent it from falling over Make sure the television is located in a position where it cannot be pushed or hit by objects as pressure will break or damage the screen and so that small objects cannot be inserted into the ventilation slots or openings in the cabinet Functional parts Top View of the TV Ka A luuscconcscctcnsccucccnc Daarsccccccrc ee oe0 4 4 EE LINA YS LLLA 4 0 Front View of the TV V Button V Button CH Button CH Button MENU Button SOURCE Button Standby Button Open Close
16. l in fav channel EPG Press to show the Electronic Program Guide menu TEXT Switch On or Off the teletext mode HOLD Hold On or Off for current page display TV RADIO Press to select TV or RADIO mode SUBTITLE To switch the dialogue at the bottom of the screen INDEX INDEX request the index page REVEAL Press REVEAL to reveal or hidden the hidden words SUBPAGE Press SUBPAGE to sub coded page access LANG To show the list of audio languages available for the current channel Play pause Stop playing recording Press to go to the previous chapter Press to go to the next chapter Play a program in fast rewind mode Play a program in fast forward mode To begin recording ASPECT NICAM VOL i QD B N ka LN F a a PA a ang E LO Cun SOURCE PMODE SMODE FAV FAV FAV SPL CH J e e SLEEP EPG TEXT HOLD TV RADIO SUBTITLE INDEX SIZE REVEAL SUBPAGE PROG RENAME REPEAT EC DEL RENAME MOVE SKIP Navigation buttons in TV mode OPEN CLOSE Button Press OPEN CLOSE button to load disc on disc tray M PPIButton Press these button to go to the previous next chapter DVD lt lt PF Button These buttons allow skipping ahead back at 5 level speed Press PLAY button to return to normal playback REPEAT Button To press this button you can repeatedly play a title DVD or all tracks CD Pil Button Press this button to start playback Press this button again to pause play
17. ust be changed to improve operability or other functions priority is given to the product specification itself In such instances the instruction manual may not entirely match all the functions of the actual product Therefore the actual product and packaging as well as the name and illustration may differ from the manual The screen shown as an example in this manual may be different from the actual screen display Lenco is not liable for any consequential damage What s in the box Our factory assembles the content of the box with the utmost care If unfortunately an accessory is missing in the box please contact your dealer as soon as possible Checking the accessories supplied 1x TV 1 x AC DC Power adaptor 1 x Remote Control 2 X AAA Battery 1x User manual Safety Precautions IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY BEFORE USE CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE ANY COVER SCREWS THERE ARE NO USER SERVICEABLE PARTS INSIDE REQUEST A QUALIFIED SERVICE PERSON TO PERFORM SERVICING This symbol indicates that there are important operating maintenance instructions in the user manual accompanying this unit This symbol indicates that dangerous voltage is present within this unit constituting a risk of electric shock or personal injury pp PP Keep these instructions in mind Do not use this unit near water Clean only with a slightly d
18. velop If you notice smoke an excessive build up of heat or any other unexpected phenomena you should disconnect the plug from the mains power socket immediately Ensure that the unit is sufficiently ventilated This unit must operate on a power source specified on the specification label If you are not sure of the type of power supply used in your home consult your dealer or local power company The socketoutlet must be installed near the equipment and must be easily accessible Do not overload AC outlets or extension cords Overloading can cause fire or electric shock Units with Class 1 construction shall be connected to a mains socket outlet with a protective earthing connection Keep away from rodents Rodents enjoy biting into power cords Always hold the plug when pulling out the plug from the mains supply socket Do not pull the power cord This can cause a short circuit The screen is made of plastic and can break if damage is done to it When broken be careful with sharp edged plastic splinters to avoid injury Avoid placing the unit on any surfaces that may be subject to vibrations or shocks To protect the unit during a thunderstorm unplug the AC power cable and disconnect the aerial Caution Do not touch the aerial RF connector When the unit is not used for long periods of time unplug the AC power cable for safety reasons Do NOT tap or shake the screen you may damage the internal circuits Tak
Download Pdf Manuals
Related Search