Digital Satellite Receiver with Embedded CryptoWorks SRT 6502
Contents
1. receiver will search only Free To Air channels Free Scr receiver will search for all channels Transponder select index from the stored list Frequency value of transponder frequency in MHz Symbol Rate value of symbol rate in kSymbols Per Second Polarity Horizontal Vertical Right Left FEC Auto 1 2 2 3 3 4 5 6 7 8 Function Append Delete Change AGC Signal Indicates received signal strength level 8 2 3 1 How to search for channels lt S7RONG DIGITAL TV receiver will search channels from one transponder and in addition use network information This mode Highlight Tune method field and press OK Receiver will start channel scan Names of the found channels will be shown in the two columns for TV and Radio separately You can interrupt search process by pressing to OK or Exit button If you press OK button search process will be interrupted and you can select one of the following options If you press EXIT button search process will be interrupted and no channels stored in the memory Save to save all found channels Unselect to unselect some unwanted channels from the list Use OK button to unselect channels and VOL lt gt buttons to switch between TV and Radio list Once you finish press EXIT button select Save and press OK Only selected channels will be stored in the memory Cancel to cancel result of search No channels will be stored in the memory 8 2 3 2 How to2. STRONG DIGITAL TV Digital Satellite Receiver with Embedded CryptoWorks SRT 6502 User Manual www strong tv barii a STRONG DIGITAL TV TABLE OF CONTENTS 1 0 INTRODUCTION 1 1 Overview 2 1 2 Main Features 2 2 0 SAFETY PRECAUTIONS 2 2 1 Safety Instructions 2 2 2 Storage 3 2 3 Equipment Set up 3 3 0 ACCESSORIES 3 4 0 CONTROLS FUNCTIONS 4 4 1 Front Panel 4 4 2 Rear Panel 4 4 3 Remote Control 5 5 0 USING THE REMOTE CONTROL 6 5 1 Batteries 5 2 Range Of Operation 6 6 0 CONNECTING THE RECEIVER 7 6 1 To a TV set using TV SCART connection 7 6 2 To a Hi Fi system and a TV set using both A V connections 7 6 3 To a Video or DVD recorder and a TV set using both SCART connections 8 7 0 STARTING UP FOR THE FIRST TIME 8 8 0 SETUP AND OPERATION 9 8 1 Before Setup 9 8 2 Setup Menu 9 8 3 Main Menu Settings 12 8 4 General Viewing Information 15 A 1 PROBLEM SOLVING 19 A 2 SPECIFICATIONS 19 www strong tv 1 STRONG nar teh DIGITAL TV 1 0 INTRODUCTION 1 1 Overview This satellite receiver was designed for Digital satellite receiver with CryptoWorks embedded It enables you to tune in on the hundreds of digital te technology It performs numerous functions to provide you with a variety of services 1 2 Main Features m Embedded Smartcard Reader to watch programmes encrypted by CryptoWorks Conditional Access m For all digital Free To Air TV and Radio channels via satellite m Pre programmed with most popular channels m Ex
3. add new transponder set Tune method to TP or TP NIT move focus to Frequency and enter value in MHz move focus to Symbol rate and enter value in kSPS move focus to Polarity and select value move focus to FEC and select value or set Auto move focus to Function select Append and press OK Message Saving data will be shown on screen New transponder will be added to the end of the list 8 2 3 3 How to delete present transponder set Tune method to TP or TP NIT move focus to Transponder and choose transponder you want to delete move focus to Function select Delete and press OK Message Saving data will be shown on screen Selected transponder deleted from the list 8 2 3 4 How to correct edit parameters of the transponder set Tune method to TP or TP NIT move focus to Transponder and choose transponder you want to modify move focus to Frequency and enter value in MHz move focus to Symbol rate and enter value in kSPS move focus to Polarity and select value move focus to FEC and select value or set Auto move focus to Function select Change and press OK Message Saving data will be shown on screen Modified data are stored in the memory Press EXIT to go back to the previous mode www strong tv 11 STRONG nar tei DIGITAL TV 8 2
4. 234 This is default PIN code and it can be changed later as described in Setup Lock PIN m Use the CH A V and VOL lt gt buttons to move across a menu page m When you have reached the required item press the OK button to confirm your choice m Press EXIT to return to quit the mode 8 2 1 System Setup Press the OK button on System Setup in the Setup Menu Set the Video Format TV Type Scart RGB output GMT Offset Positioner LNB Reference and Summer Time m Use CH A F to move up and down in the list m Use VOL lt gt to change the setting Video Format MULTI PAL I B G or K SECAM NTSC TV Type Standard 4 3 Wide 16 9 and aspect conversion PAN SCAN Letter box Scart RGB On Off Positioner Yes No Teletext type STB VBI GMT Offset 12 00 12 00 Summer Time On Off m Upon reaching the required settings press OK to store the setting m Press EXIT to go back to the previous mode 8 2 2 Antenna Setup Press OK on Antenna Setup in the Setup Menu Set the satellite LNB Frequency 22 kHz Tone DiSEqC mode LNB Power and Positioner setup m Use CH A F to move up and down the list m Use VOL lt gt to change the setting SAT select satellite from the stored list To include satellite to the list of satellites available for Channel search you need to select it with OK button Selected satellites marked with symbol If you want to rename selected satellite press INFO button LNB Type select b
5. 4 Setup Lock PIN Press OK on Setup Lock PIN in the Setup Menu Set the Menu Lock Change the PIN enter the New PIN and confirm the Confirm PIN m Use CH A F to move up and down the list m Use VOL lt gt to change the setting Menu Lock On Off Change PIN Press OK if you want to change New PIN Enter your new 4 digit code Confirm PIN Confirm your new 4 digit code Note The default PIN is 1234 Press EXIT to go back to the previous mode 8 2 5 Time Setting Press OK on Time Setting in the Setup Menu Set the Local Time Sleep Time Timer Status and Program the Timer m Use CH A to move up and down the list m Use VOL lt gt to change the setting Local Time if you want to correct time and date then enter in format dd mm yyyy day hh mm Sleep Time 0 180 min Receiver will be turned off after selected time interval Timer select timer number Status Disabled Enabled f Enabled receiver will be turned on within selected channels at defined start time and turned off after duration interval Channel type TV Radio Channel number enter channel number If you use multi satellite installation make sure to enter channel number in All satellites mode Channel name displayed automatically and depends from channel number Start time enter start time in format dd mm yyyy day hh mm Duration enter duration in hh mm format Note Timer also can be programmed fr
6. AT IN Connect the cable from your LNB on the satellite dish to this connector 3 VCR SCART To connect your receiver to your video recorder using a scart cable Your video signal will now be looped through your receiver to your TV set 4 TV SCART To connect your receiver to your TV set using a SCART cable 5 S PDIF Digital audio output Use this coaxial output to connect your receiver to the input of your digital audio amplifier 6 AUDIO R and AUDIO L Audio Right RED and Audio Left White RCA connectors to connect to audio amplifier 7 Power On Off switch 8 Power Cord Your receiver requires a current of 90 250 V AC Auto selectable 50 60 Hz 5 Make sure to check the power specification before connecting your receiver to the wall outlet 4 www strong tv barii a STRONG DIGITAL TV 4 3 Remote Control 1 Power D Switches the receiver between Stand By amp On modes 2 Mute X Mutes the audio output 3 Numeric Keys 0 9 For direct entry of channel number or input of alphanumeric characters 4 FAV Displays the current favorite channels list 5 INFO Displays the available information on the viewed channel 6 SETUP Accesses the receiver set up menu 7 RECALL Goes back to the previously viewed channel 8 TEXT Displays the teletext contents of the viewed channel if teletext is transmitted 9 EPG Electronic Program Guide Provides program content information Press again to return to viewing mode 10 CH A
7. TIONS 2 1 Safety Instructions DO NOT INSTALL YOUR RECEIVER m Inaclosed or poorly ventilated cabinet directly on top of or under any another equipment on a surface which might obstruct the ventilation slots DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES m To direct sunlight or near any other equipment that generates heat to rain or intense moisture to intense vibration or to any shock which may cause permanent damage to your receiver or to any magnetic objects such as loudspeakers transformers etc Do not use a damaged power cord It may cause a fire or an electrical shock Do not touch the power cord with wet hands It may cause an electric shock 2 www strong tv PART 1 o English Never open the cover It is dangerous to touch the inside of the receiver due to high voltage currents and possible electrical hazards Your warranty will be void if the receiver has been opened When the receiver is not used for a long period of time you should switch OFF the receiver Power Switch and unplug the power cord from the wall socket Do not use alcohol or ammonia based liquids to clean the receiver If you wish you may clean your receiver with a soft lint free cloth slightly made damp with a mild soap solution only after disconnecting from the main power supply Make sure no foreign objects fall through the ventilation slots because this could cause fire or an electric shock Do not place any objects on top of the receiver because this might
8. V Change channels sequentially up or down in viewing mode and move the cursor up or down in an application screen 11 VOL lt gt Alter the audio output level up or down in viewing mode and change the selected item s setting in an application screen 12 OK Selects an item or confirms a choice 13 MENU Accesses the main menu STRONG 14 EXIT pcan To return to previous status or menu 15 TV Switches to TV channel list 16 LANG Select sound mode or audio language 17 RADIO Switches to Radio channel list www strong tv 5 STRONG nar tei DIGITAL TV 5 0 USING THE REMOTE CONTROL 5 1 Batteries How to insert the batteries m Open the cover at the top of the rear side of the handset m Insert two AAA type batteries 1 5 V respecting the indicated polarity signs m Close the cover When to replace the batteries m When the operational range of the handset gets smaller or when the receiver no longer responds to each and every command Always replace both batteries at the same time Accident prevention Do not recharge heat or disassemble the batteries m Make sure the intended polarity alignment is respected m Ifthe handset is not going to be used for some time take the batteries out If not the batteries may leak and cause damage to the handset 5 2 Range Of Operation m Transmission distance does not exceed 7m Note When the handset is not operational Replace the batteries and make sure
9. cellent Audio amp Video quality m Quick and easy installation amp user friendly menu m Over 3 000 TV channel memory capacity and 1 000 radio channel memory capacity m Digital sound through coaxial output S PDIF by connecting to digital amplifier m Parental lock function for menu and selectable per channel m 5 Favourite lists for TV and Radio channels m Teletext via receiver and TV remote control m Display showing channel number or time m Power switch m Electronic TV Programme Guide EPG for on screen programme information of present following event information up to 4 days m Subtitle and Timer function sleep awake m Multi lingual audio track support Multi lingual support on screen menu OSD such as English German Czech Slovak Hungarian Bulgarian Turkish m Edit function for TV and radio programme name favourite group name and transponder information m Future proof Software update via satellite OTA m Signal strength bar for digital transponders m Automatic and manual channel scan options m Power on with last viewed channel m User friendly remote control with coloured function buttons Infrared up to 7 metres m Supports DiSEqC 1 0 and DiSEqC 1 2 m PAL NTSC SECAM compatible m Connectors SAT IN SAT OUT 1 TV SCART RGB CVBS Y C Audio 1 VCR SCART CVBS Y C Audio 2 RCA Audio L amp R coaxial Digital Audio S PDIF Separate power switch Precondition is an activated and valid CryptoWorks smartcard 2 0 SAFETY PRECAU
10. d and for the receiver Smart Card Pin Code Change Enter Old Pin Enter New Pin Confirm New Pin In this menu you can change PIN code of your smart card Available Program Providers information about program providers 14 www strong tv barii a STRONG DIGITAL TV 8 3 6 About Press OK on the About It shows model name application Ver and device version System software update To download latest software version highlight Update and press OK Receiver will check if newest version is available In case it is available you will be asked to confirm update In case no new software is available you will get corresponded message m Press EXIT to go back to the previous mode 8 4 General Viewing Information 8 4 1 Program Information Information on the currently viewed program appears for a few seconds when you press INFO 14 10 14 64 TELEFILM Le sorella McLeod TA hh TR AA TELEFILM H cisammigearin How Favourite Scramble Lock Teletext Satellite Name Clock a Channel Name Channel Number Program Information www strong tv 15 STRONG nar tei DIGITAL TV 8 4 2 TV Radio Channels List While watching TV or listening to Radio you can call the channel list by pressing TV RADIO or OK button The picture in the preview screen is that of the highlighted channel which can be changed with the CH A F VOL lt 4 P scrolls Channel List pages Down or Up Pressing OK on a highlighted c
11. eduled information for another channel exit from schedule mode select channel in Now amp Next mode and finally select schedule mode www strong tv 17 lt S7RONG DIGITAL TV 8 4 5 Selection of alternate audio track or audio mode Press LANG to access the audio language selection screen m Use CH A F to move up and down the list m Use VOL lt gt to change the setting Track 1 of 1 2 Select Mode Stereo Mono Left Mono Right Level Normal High Low Language displays name of the audio track if available Subtitle Select subtitle language if available broadcaster dependent m Press OK to confirm your selection and close this menu 8 4 6 Recall Press RECALL to recall the previous channel 8 4 7 Teletext Press TXT to access the Teletext service if available from the broadcaster 18 PART 1 o English www strong tv barii a STRONG DIGITAL TV A 1 PROBLEM SOLVING There may be various reasons for the abnormal operation of the unit Therefore if the unit does not work properly check it according to the procedures shown in the table below The display on front panel does The power cord is not plugged in Check that the power cord is plugged in to the wall outlet not light up No picture or sound Wrong connection of the Audio Video Connect the Audio Video output of the receiver to TV output of the receiver to TV correctly Audio muting Press the Mute button TV power off Tur
12. etween Universal Wide Band OSC C Band C Band Ku Band Unicable Standard Sat Make your selection depending from installed LNB High L O enter the frequency of Local Oscillator for High band Refer to your LNB manual Low L O enter the frequency of Local Oscillator for Low band Refer to your LNB manual 22 kHz Tone On Off Auto Make your selection depending from installed LNB DiSEqC Off DiSEqC A B C or D Tone A or B If you have DiSEqC 1 0 or Tone Burst switch installed LNB Power H V 14V 18V Off Positioner None DiSEqC 1 2 USALS If you use antenna mounted on the DiSEqC 1 2 positioner then select DiSEqC 1 2 If your positioner is USALS compatible then select USALS www strong tv 9 STRONG nar tei DIGITAL TV 8 2 2 1 DiSEqC 1 2 positioner setup Mount installed by a professional In Antenna Setup menu set Positioner to DiSEqC 1 2 and press OK button to enter to Antenna position menu m Use CH A F to move up and down in the list m Use VOL 4 P to change the setting Satellite select satellite position of which you would like to setup Transponder select reference transponder which should be used for signal quality indication Move when this item is highlighted press VOL lt P to move dish in East West direction accordingly Save position highlight this item and press OK to store current position of the dish for selected satellite The symbol shown near
13. hannel calls that channel and exits the Channel List To sort channels in various modes press EXIT while focus of the list is pointed to the channels If you have multi satellite installation then field with satellite name will be highlighted Use VOL lt P to select satellite of your choice Press OK to return to the channel list Highlight List to sort channels by alphabet number of FTA m mode ALL 1 2 3 is to display all channels from current satellite in channel number order m mode ALL A B C is to display all channels from current satellite in Alphabet order m mode Free 1 2 3 is to display only FTA channels from current satellite in channel number order m mode Free A B C is to display only FTA channels from current satellite in Alphabet order Press OK to return to the channel list To exit from the channel list press OK when channel is highlighted or press EXIT button twice TV Channel List satellite selection EXIT Ey 16 www strong tv partieengish ssi STRONG DIGITAL TV TV Channel List channels sorting DV Charirnels EXIT _ _ _ S ij pa 7 WLP FE Pic amp FHolbird l S Radio list is similar to TV list To select between TV and Radio list use TV RADIO button while channel list is displayed on screen 8 4 3 Favorite Channels Lists While watching TV or listening to Radio you can call the respective favorite channels list by pressing FAV If you pre
14. menu item once position is stored Reference position highlight this item and press OK if you need to turn dish to reference position 0 degree position Function Set west limit Set east limit select it and press OK if you want to store current position of the dish as west east limit Disable limit Enable limit select and press OK to disable enable limits Recalculate select and press OK to recalculate positions of all satellites based on adjustment for current satellite Nudge west Nudge east select and press OK for fine adjustment of the dish position Nudge tilt up Nudge tilt down use this command if your positioner support adjustment of elevation Antenna status show you current status of the antenna stopped moving to East West Signal Quality show quality of signal for selected reference transponder Adjust antenna position in order to get maximum level of the Signal Quality m Press EXIT to go back to the previous mode 8 2 2 2 USALS positioner setup installed by a professional In Antenna Setup menu set Positioner to USALS and press OK button to enter to Antenna position menu m Use CH A F to move up and down in the list m Use VOL 4 P to change the setting Satellite select satellite position of which you would like to setup Transponder select reference transponder which should be used for signal quality indication My longitude set longitude of your location My latitude
15. n Czech Slovak Bulgarian Turkish German Radio Ch Logo enable or disable logo for Radio channels m Use CH A F to move upwards and downwards in the menus m Use VOL lt 4 P to change the values in the alternatives m When you have reached the required subject menu press OK to confirm your selection m Press EXIT to go back to the previous mode 8 3 4 Edit Channels Press OK on the Edit Channel Select the Edit channel menu Use EXIT button to toggle between channel lists and function selection c Ba function and use CH A to select list To toggle between TV and Radio lists highlight To return to menu press EXIT button when any function is highlighted You will be required to confirm or discard changes that you have made 8 3 4 1 Move channel To move channel highlight icon and press OK Highlight the channel which you want to move and press OK If you want to move group of channels highlight and select with OK button all channels that you want to move Once you finish selection of channels select position in the channel list where to move selected channels and press RECALL button Press EXIT to return to function selection or continue to move other channels if you want 8 3 4 2 Add to favourite list To add channel to favourite list highlight icon and press OK Highlight the channel which you want to add to favourite group and press OK List of favourite groups will be displayed on screen Select group
16. n TV on No picture The receiver can t receive the signal Check the antenna cable replace the cable or connect the cable to the receiver tightly Incorrect values of some Set the values of the tuner parameters correctly in the tuner parameters installation menu Wrong direction of the dish Check the signal strength with a spectrum analyzer and adjust your dish correctly The remote control does not work The batteries of the remote controller Check whether the batteries are inserted correctly in your are not inserted or exhausted remote control Check the batteries and if exhausted replace the batteries in the remote control A 2 SPECIFICATIONS Tuner Input Frequency Range 950 2150 MHz Input signal level 65 25dBm LNB Power 14 18 V DC max 400 mA LNB switch control 22 kHz DiSEqC Version 1 0 amp 1 2 compatible Demodulator Modulation QPSK Input Symbol Rate 2 45 Ms s SCPC amp MCPC signals from C amp KU band satellites Video Decoder Profile level MPEG 2 Main profile Main level Data Rate Up to 15 Mbit s Video Resolution 720 x 576 720 x 480 Video Format NTSC PAL SECAM Aspect Ratio 4 3 16 9 www strong tv 19 lt S7RONG DIGITAL TV Audio Decoder MPEG 1 MusiCam Layer amp II Audio mode Mono Dual mono Stereo Sampling Rate 32 44 1 48 kHz Connectors SAT IN SAT OUT 1 TV SCART RGB CVBS Y C Audio 1 VCR SCART CVBS Y C Audio 2 RCA Audio L amp R Coa
17. of your choice and press OK Continue to add other channels if you wish If you wish to remove channel from favourite group select group 0 unselect Press EXIT to return to function selection www strong tv 13 STRONG OAR DIGITAL TV 8 3 4 3 Lock channel Lock fun example To lock channel highlight icon and press OK Highlight the channel which you want to lock and press OK If you wish to unlock channel then repeat selection with OK button Press EXIT to return to function selection 8 3 4 4 Delete channel To delete channel highlight icon and press OK Highlight the channel which you want to delete and press OK Continue to select other channels that you wish to delete If you wish to unlock channel then repeat selection with OK button Press EXIT to return to function selection 8 3 4 5 Add channel channel Before use this function you need to know details of channel which want to add To add new channel highlight icon and press OK Below menu will be displayed Select satell this menu Highlight Channel name and press OK Enter channel name with keypad displayed Enter value of Audio Video and PCR PID and press OK Press EXIT to return to function selection 8 3 4 6 Edit channel name To edit channel name highlight 4 icon and press OK Select channel which name you wish to edit and press OK Use displayed keyboard to edit the name select Save function to store new name or Cancel to discard changes Pres
18. om EPG See Program Guide chapter of this manual m Press OK to store settings and go back to the previous mode 8 2 6 Factory Default Press OK on Factory Set in the Setup Menu Confirm whether you wish to go back to the factory default settings This function wi the memory 8 3 Main Menu Settings From the Main Menu you can access to the Program Guide Channel Sorting Language Preference Settings Favorites Editing Channel Editing Smart card information and Software Version information m Press MENU m Use CH A F to move up and down the list m Use VOL lt 4 P to change the setting m Upon reaching the required menu line press OK to enter the setting m Press EXIT to go back to the previous mode 8 3 1 Program Guide This menu displays same information as described in chapter 8 4 4 Press OK on Program Guide in the Main Menu 12 www strong tv ariei a STRONG DIGITAL TV 8 3 2 Sort Channels Press OK on Program Search in the Main Menu m Use VOL lt 4 P to select an alphabetical letter m Press OK to confirm your choice m Use CH A F to move up and down in the list m Use VOL lt 4 P to scroll pages Down or Up m Pressing OK on the highlighted channel calls that channel and closes this menu m Press EXIT twice to go back to the previous mode 8 3 3 Language Press OK on the Language Preference Select the menu language and Logo for Radio channel Menu Language Available English Hungaria
19. opular channels If your antenna is primed to your selected satellite you will get a picture and sound on your TV otherwise the message Invalid or no signal will appear on your TV screen In this case do following steps 1 Press OK button on your remote control Channel list will be displayed 2 Press EXIT button This will move focus to the field with name of satellite 3 Using VOL lt P buttons select satellite where your antenna is pointed and press OK 4 Focus will be moved back to channel list Select channel of your choice and press OK button to confirm It ca installation as described below in 8 2 Setup menu See 8 2 2 Antenna setup and 8 2 3 Channel search 8 www strong tv marii a STRONG DIGITAL TV 8 0 SETUP AND OPERATION 8 1 Before Setup Information A menu is a field of text displayed on the TV screen Selectable menu items are generally highlighted Items that are not highlighted cannot be selected Most menus display explanatory information at the bottom of the screen 8 2 Setup Menu To install the receiver properly you have to perform a Setup Procedure After you finish the setup procedure you can start watching TV or listening to Radio During the basic settings the short information is displayed at the bottom of the menu screen m Turn on your TV and receiver m Press the SETUP button to display the setup mode You will be asked to enter PIN code Using numeric buttons enter PIN code 1
20. prevent proper cooling of the components inside Safety Precautions Do not open the receiver cover as you will be exposed to a shock hazard It will also void your warranty Refer all maintenance or servicing to qualified personnel When you are connecting the cables be sure that the receiver is disconnected from the main power supply Wait a few seconds after switching off the receiver before you move the receiver or disconnect any equipment It is a necessity that you only use an approved extension and compatible wiring that is suitable for the electrical power consumption of the installed equipment Please ensure that the electrical power supply corresponds with the voltage on the electrical identification plate at the back of the receiver If the receiver does not operate normally even after strictly following the instructions in this user manual it is recommended to consult your dealer 2 2 Storage Your When un from one accessories Failing to comply with such packaging procedures could void your warranty 2 3 Equipment Set up We recommend you consult a professional installer to set up your equipment Otherwise please follow the instructions below m Make sure that the SCART cable and outdoor components are in a good condition and the SCART connections are well shielded Refer to the user manual of your TV and your antenna This manual provides complete instructions for installing and using this receiver The following
21. s EXIT to return to function selection 8 3 5 Smart Card You can enjoy not only Free To Air services but also CryptoWorks embedded service channels To view CryptoWorks embedded service channels just insert Smart card into slot Once you insert the smart card you will see CryptoWorks embedded service channels If you need further information contact your service provider or distributor General Card Information Card Label and Additional Info Set Maturity Rating Smart Card Pin Code Change Available Program Providers Available Entitlements in this menu you can check validity period of your smart card Profile Information Current Mode Profile Image ID Hardware Version Loader Version 8 3 5 1 General Card Information Choice General Card information you can find information of Smart Card as followings Card Label and Additional Info to check following information Card Label Smart Card Address Card Valid until Current Maturity Rate Set Maturity Rating Current Maturity Rate Set Maturity Rate Your broadcaster can assign maturity rating for each program If you have children and want to deny their access to the programs with maturity rate above their age set maturity rating value to age of your children You or your children will be asked to enter smart card PIN code in case when maturity rating of program content is above of maturity rating that you have set in this menu Note We recommend to use different PIN codes for the smart car
22. set latitude of your location Move highlight this item and press lt button to turn dish to the position corresponded to the selected satellite Press button to stop dish Reference position highlight this item and press OK if you need to turn dish to reference position 0 degree position Signal Level and Quality show level and quality of signal for selected reference transponder Adjust longitude and latitude of your location in order to get maximum values of the Signal Level and Quality indicators m Press EXIT to go back to the previous mode 8 2 3 Channel Search Press OK on Channel Search in the Setup Menu Set the Satellite Tune Method Transponder Frequency Symbol Rate FEC and Function m Use CH A F to move up and down the list m Use VOL lt gt to change the setting Satellite Name choose from the list of satellites selected in Antenna setup menu Tune Method Main options are Sat receiver will search channels according to stored list of transponders Sat NIT receiver will search channels according to stored list of transponders and in addition use network information This mode allows you to find all channels even from new appeared transponders Tp this method is to search channels from one transponder 10 www strong tv PART 1 o English TP NIP recommended if you want to search channels of particular broadcaster only Sub options are Free
23. ss FAV button while watching TV channel the list of TV Favourite channels will be displayed If you press FAV button while listening to Radio the list of Radio Favourite will be displayed In case you didn t add any channels to Favourite lists it would not appear To change between Favourite lists you can use FAV button or press EXIT button while Favourite list is displayed The List field will be highlighted Use VOL lt P to select Favourite list and press OK once finished To return back to ALL channels mode press TV RADIO button 8 4 4 Program Guide Press EPG to access the electronic program guide if available from the broadcaster Once you enter to Program Guide the Now amp Next mode is selected You can select mode Schedule if press VOL or you can change between TV and Radio list if press VOL lt button Now amp Next mode Select Now amp Next and press OK Select channel of your choice using CH A V buttons Select program information using VOL lt gt buttons Below channel list you can see extended description of the highlighted program To view detailed description of the program press OK button Schedule mode This mode displays scheduled program information for current channel Select Schedule and press OK Select program of your choice and press OK to see detailed program information To reserve Timer for selected program press RECALL button and confirm timer settings To view sch
24. symbols will serve as follow Warning Indicates warning information Tips MENU Move to Indicates any other additional important or helpful information Represents a button on the remote control or the receiver Represents a menu item within a window 3 0 ACCESSORIES The following have been packed in your receiver box m User s manual 1 Pc m Remote control 1 Pc m Batteries AAA Type 2 Pcs Note If any accessory listed above is missing contact the point of purchase www strong tv lt gt 7RONG DIGITAL TV STRONG nar ti DIGITAL TV 4 0 CONTROLS FUNCTIONS 4 1 Front Panel Digital Cryptoworks Embedded Satellite Receiver 1 LED 4 Digit Displays the time in Stand By mode and the channel number when the unit is operating 2 IR Sensor Detects the infra red command signals generated by the remote control handset 3 amp 4 Channel A amp V Move the cursor Up or Down in an application screen or change channels sequentially Up or Down in normal operation 5 Power Button Switches the receiver between Stand By and On modes 6 Smart card reader Insert your CryptoWorks smart card with golden contacts facing down 4 2 Rear Panel 100 250V Oo 50 60 Hz 30W SATIN 950 2150 MHz 400mA max x Cannonooo0d TTT O QO ino 000o000li A VCR SCART TV SCART 1 SAT OUT Gives you the possibility to connect an extra receiver analogue or digital 2 S
25. the receiver is connected to the power supply Note Abnormal operation Disturbance from peripheral devices may occur You will need to move the object that is generating the disturbance Note Notes for handling In the event the receiver is exposed to heat or water operating it could be dangerous Have the unit checked by a qualified technician prior to operating it again 6 www strong tv ariei a STRONG DIGITAL TV 6 0 CONNECTING THE RECEIVER 6 1 To a TV set using TV SCART connection TELEVISION TELEVISION S PDIF TV SCART Supplied by STRONG amp Co Japan www strong tv 7 STRONG OAR DIGITAL TV 6 3 To a Video or DVD recorder and a TV set using both SCART connections TELEVISION Video DVD recorder oo aE R Dio 100 250V a 50 60 Hz 30W VCR SCART TV SCART SAT I 950 2150 MHz Supplied by STRONG amp Co Japan 7 0 STARTING UP FOR THE FIRST TIME Ensure th Check if all connections are done in correct way If you are not sure about this then ask your local Strong dealer to check your installation or satellite signal Once you start the receiver for the first time a country selection dialog will be displayed Select your country from the list using VOL lt gt buttons If your country is not in the list select Other After selection of country a specific settings for selected country will be loaded For each country we have pre loaded most p
26. tteries Batteries discarded in landfill sites or incinerated increases the chances of pollutants being dispersed into the atmosphere Alternations reserved 03 2008
27. w materials and reducing the amount of material that would otherwise end up in landfill When you purchase a new similar product your retailer may offer to take this old one off you Alternatively you can take it to your local recycling centre Your retailer or local municipal authority will advise you of the collection facilities available for waste electronically products in your area User of this service will be free to you Within the scope of the European legislation on Waste Electrical and Electronic Equipment Directive 2002 96 EC valid as of August 2005 STRONG provides a recycling system free of charge for consumers to returning products after end of life For more information about STRONG s environmental policy to you www strong tv select About us and Environmental Policy from the submenu www strong tv Packaging When disposing of this product packaging R NE p p g p p ging 4 Ly please ensure that it is recycled Packaging ha material is to be depolluted in waste separation Power Saving To save power and money please put the product into standby mode when not in use We also recommend disconnection from mains supply when not in use for longer periods of time Batteries Do not dispose of the batteries from your OFA handset with your domestic waste Where they are available participate in your local municipal or retailer collection schemes for spent ba
28. xial Digital Audio S PDIF Power switch System amp Memory Main Processor STi5518 Flash Memory 2 MBytes SDRAM 8 MBytes General Data Supply Voltage 100 250 V AC SMPS 50 60 Hz Power Consumption 14 W Stand by Mode lt 13 W Operating Temperature 5 45 C Storage Temperature 0 50 C Humidity 25 70 Size WxHxD in mm 214 x 42 x 153 Weight 0 93 kg PART 1 o English Subject to alterations In consequence of continuous research and development technical specifications design and appearance of products may change ASTRA is a registered trade mark of SES ASTRA Eutelsat and HOT BIRD are registered trade marks of Eutelsat Communications CryptoWorks is a trademark of Irdeto Access B V all other product names are trademarks or registered trademarks of their respective owners STRONG 2008 All rights reserved 06 2008 20 www strong tv Environmental Issues ENVIRONMENTAL ISSUES lt S7RONG DIGITAL TV STRONG is committed to reducing the impact of its products on the environment To maximise the benefits of our design enhancements your co operation is required Electronic product recycling Do not dispose of this product with your domestic rubbish At the end of its useful life this product contains materials which when processed correctly can be recovered and recycled By participating in the responsible recycling of this product you will be reducing the requirement for new ra
Download Pdf Manuals
Related Search