Home

NETWORK CAMERA - Surveillance

1. LS FAR NEAR ga To ensure seamless waterproofing tighten up the front cover by turning it to the end When combining the front cover please combine the main body and the front cover so that the LOCK indicator is interlocked Use the lever to adjust the zoom factor or focus and turn the lever clockwise to fix it Before you can adjust the zoom factor focus of the lens loosen and remove the front cover 32_ installation amp connection INSTALLATION SNV L5083R m This camera is waterproof and in compliance with the IP66 spec but the jack connected to the external cable is not You are recommended to install this product below the edge of eaves to prevent the cable from being externally exposed Precautions before installation Ensure you read out the following instructions before installing the camera e t must be installed on the area ceiling or wall that can withstand 5 times the weight of the camera including the installation bracket e Stuck in or peeled off cables can cause damage to the product or a fire e For safety purposes keep anyone else away from the installation site And put aside personal belongings from the site just in case Disassembling P With the provided L wrench loosen Dome cover 3 bolts on the dome cover counter clockwise to remove the cover Jones bp SK CN Bolts c a Camera Body NS z Camera Case Eng
2. c You must license the entire work as a whole under this License to anyone who comes into possession of a copy This License will therefore apply along with any applicable section 7 additional terms to the whole of the work and all its parts regardless of how they are packaged This License gives no permission to license the work in any other way but it does not invalidate such permission if you have separately received it d If the work has interactive user interfaces each must display Appropriate Legal Notices however if the Program has interactive interfaces that do not display Appropriate Legal Notices your work need not make them do so A compilation of a covered work with other separate and independent works which are not by their nature extensions of the covered work and which are not combined with it such as to form a larger program in or on a volume of a storage or distribution medium is called an aggregate if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation s users beyond what the individual works permit Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate 6 Conveying Non Source Forms You may convey a covered work in object code form under the terms of sections 4 and 5 provided that you also convey the machine readable Corresponding Source under the terms of this License
3. Alternatively the contents of this file may be used under the terms of the license the ___ License in which case the provisions of License are applicable instead of those above If you wish to allow use of your version of this file only under the terms of the ____ License and not to allow others to use your version of this file under the MPL indicate your decision by deleting the provisions above and replace them with the notice and other provisions required by the __ License If you do not delete the provisions above a recipient may use your version of this file under either the MPL or the __ License NOTE The text of this Exhibit A may differ slightly from the text of the notices in the Source Code files of the Original Code You should use the text of this Exhibit A rather than the text found in the Original Code Source Code for Your Modifications The Independent JPEG Group s JPEG Software The software included in this product contains copyrighted software that is licensed under the JPEG license e JPEG license Code project Generating Outline OpenGL Libjpeg This distribution contains the sixth public release of the Independent JPEG Group s free JPEG software You are welcome to redistribute this software and to use it for any purpose subject to the conditions under LEGAL ISSUES below Serious users of this software particularly those incorporating it into larger programs should contact IJG
4. How to set the time bar If you press the button the details of the time bar section can be viewed If you press the EM button you can view a wider range of times and the desired time can be selected more easily English _73 web viewer 6 Move Time bar EH to a desired time point of the video before playing it The time containing a normal recoding file will be highlighted in blue the time with the event recording will be highlighted in red To back up the searched video 1 Click button Confirm the save path and click Save During playback click EX on the scene to back up The scheduling window for backup start and end time appears The Save As window appears button The screenshot will be backed up to the specified path Pictures library Includes 1 locations To play the backup video The backed up images are saved in an avi format Gom Player VLC Player and Window Media Player are recommended as the media player compatible with this format 14 and install it prior to use 74_ web viewer In case of Windows Media Player download the latest codec from www windows codecs com To Play an AVI File 1 Micro SD memory card 1 Separate the Micro SD memory card from the camera a Before separating the Micro SD memory card set the lt Device gt to lt Off gt in the Setup Event Storage menu 2 Insert the Micro SD memory card into the PC 3
5. Item Description 8 Video information Time data of the replayed video is displayed on the screen Set the desired date to make a backup copy of video data saved in your 9 Backup Micro SD memory card or NAS Can be set as up to 5 minutes YAMGIA GAM To play after searching by time 1 Click Time Search Ed 2 Click a desired date in the calendar The video on the specified date will be played 3 If the video playback is stopped select a time and click Play 4 The video on the selected time will be played 4 While the video is being played the recording time for the current video will be shown 5 Search for the video forward or backward and control the play speed How to Control the Play Interval l gt Select this button to move 1 frame forward Il Select this button to move 1 second back To control the play speed If selecting gt the button will switch to x1 x2 x4 x8 and the play speed will increase accordingly When the lt 4 button is selected the playing speed is decreased to 1x 2x 4x 8x and the playing speed slows down gradually Subsequently the quick playing speed is returned to the normal speed and the reverse playing speed increases To control the playback direction If you see the gt button with the play speed displayed the video will be played forward Whereas if you see the lt 4 button with the play speed displayed the video will be played backward
6. lt Port Range Forward gt For setting the port range forward for a third party Broadband Router refer to the user guide of that Broadband Router 2 Select lt TCP gt and lt UDP Port gt for each connected camera to the Broadband Router Each port number for the Broadband Router should match that specified in lt Setup gt lt Basic gt lt IP amp Port gt from the camera s web viewer menu 3 When done click Save Settings Your settings will be saved Wireless G Broadband Router with Sp Applications amp Gaming 192 168 1 0 192 168 1 100 192 168 1101 1921681 100 192 168 1 101 192 168 1 100 192 168 1 101 192 168 1 0 dN13S ANY NOILOANNOO MYOMLAN 1921681 0 192 168 1 0 Save Settings Cancel Changes 14 Above sample instructions are based on the CISCO s Broadband Router The settings may differ depending on the connected Broadband Router model For more information refer to the user manual of the applicable router English _59 network connection and setup Setting up Port Range Forward for several network cameras e You can set a rule of Port Forwarding on the Broadband Router device through its configuration web page e A user can change each port using the camera setting screen When Camera and Camera are connected to a r
7. Overview WHAT S INCLUDED Please check if your camera and accessories are all included in the product package 7 SND L5013 or V7 nes SND L5083R or ame SNO L5083R or SNV L5083R SND L5013 SND L5083R SNO L5083R SNV L5083R SND L5013 SND L5083R SNO L5083R SNV L5083R Instruction book Installer SAW CD Quick Guide 1 i 4 1 gt Optional xl SND L5013 Warranty card SND L5083R Optional SNO L5083R SNV L5083R i lt Q FX 10 1 SND L5013 SND L5083R SNO L5083R SNV L5083R Product installation guide Template 12 overview SND L5013 SND L5083R Useful for installation on the Tapping Screw ceiling wall etc SNO L5083R SNV L5083R S I lt protects the camera from the SNO L5083R direct sunlight It fixes the sunshield with the SNO L5083R Camera Used to install in humid places SNO L5083R Used to control the direction of the camera Used to remove nr SNV L5083R and replace the dome cover SNO L5083R Card type moisture Attached when installed absorbent SNV L5083R English _13 MAIAYSAO overview do Used to di the audio Cable bush Used to connect the LAN cable with a diameter of 07 8 5 Used for assembling the dome case when installing the product on the pipe wall mount etc or blocking a hole Machine Screws Options not included Housing for installing indoor buried type cam
8. This License refers to version 3 of the GNU General Public License Copyright also means copyright like laws that apply to other kinds of works such as semiconductor masks The Program refers to any copyrightable work licensed under this License Each licensee is addressed as you Licensees and recipients may be individuals or organizations To modify a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission other than the making of an exact copy The resulting work is called a modified version of the earlier work or a work based on the earlier work A covered work means either the unmodified Program or a work based on the Program To propagate a work means to do anything with it that without permission would make you directly or secondarily liable for infringement under applicable copyright law except executing it on a computer or modifying a private copy Propagation includes copying distribution with or without modification making available to the public and in some countries other activities as well To convey a work means any kind of propagation that enables other parties to make or receive copies Mere interaction with a user through a computer network with no transfer of a copy is not conveying An interactive user interface displays Appropriate Legal Notices to the extent that it includes a convenie
9. Micro SD Memory Card Compartment Compartment for the Micro SD memory card Audio input terminal Terminal to connect to audio cables PoE Connector Connects to the network and supplies power through Ethernet cable Installation amp connection INSTALLATION SND L5013 SND L5083R Precautions before installation Ensure you read out the following instructions before installing the camera e t must be installed on the area ceiling or wall that can withstand 5 times the weight of the camera including the installation bracket e Stuck in or peeled off cables can cause damage to the product or a fire e For safety purposes keep anyone else away from the installation site And put aside personal belongings from the site just in case Disassembling 1 Use one hand to hold the camera s bottom part and turn the cover counterclockwise with another hand to separate it 2 Lift up the inner cover to separate it English _27 NOILOANNODO 8 NOILLVTIVLSNI Installation amp connection Installation 1 Attach the installation template to the selected area and punch 3 holes as shown in the figure 1 A i 2 Use the 2 supplied screws to fix the camera JJJ J LAM fh LL LLL to the 2 punched holes 77 Set the lt FRONT gt mark imprinted on the camera to 4 YALA face the direction of camera monitoring a 3 Connect the camera internal terminal with the corresponding cable 4 Adjust
10. SAMSUNG TECHWIN NETWORK CAMERA U M SND L5013 SND L5083R ser Manua SNO L5083R SNV L5083R CE a Network Camera User Manual Copyright 2015 Samsung Techwin Co Ltd All rights reserved Trademark an SAMSUNG TECHWIN is the registered logo of Samsung Techwin Co Ltd The name of this product is the registered trademark of Samsung Techwin Co Ltd Other trademarks mentioned in this manual are the registered trademark of their respective company Restriction Samsung Techwin Co Ltd shall reserve the copyright of this document Under no circumstances this document shall be reproduced distributed or changed partially or wholly without formal authorization of Samsung Techwin Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document but no formal guarantee shall be provided Use of this document and the subsequent results shall be entirely on the user s own responsibility Samsung Techwin reserves the right to change the contents of this document without prior notice Design and specifications are subject to change without prior notice The initial administrator ID is admin and the password should be set when logging in for the first time Please change your password every three months to safely protect personal information and to prevent the damage of the information theft Please take note that it s a user s responsibility for th
11. button for each item and select a certificate to install 2 If no certificate is installed you will see Not Available appearing next to the selected item 3 Press the Install EZF button to start installation with a message of Installed next to the item 4 Press the Delete EX button to remove the certificate English _101 N3149S dN1 S Setup screen QoS You can specify the priority to secure a stable transfer rate for a specific IP 1 From the Setup menu select the lt Network EI gt tab 2 Click lt QoS gt 3 Click the Add EX button The IP list will be created 4 Enter an IP address to which you will apply QoS 14 The default prefix for IPv4 is 32 For DSCP the default is set to 63 Only the IP addresses that are set to lt Use gt can be prioritized 5 Select an IP to delete from the list Click the Delete button 6 When done click Apply EZH SNMP With the SNMP protocols the system or network admin can monitor the network devices on a remote site and configure the environment settings 1 From the Setup menu select the lt Network EI gt tab 2 Click lt SNMP gt 3 Specify the lt SNMP gt e Enable SNMP v1 SNMP version 1 will be active e Enable SNMP v2c SNMP version 2 will be active Read community Provide the name of the read community where you can access to the SNMP information The defau
12. http www bzip org THIS SOFTWARE IS PROVIDED BY THE AUTHOR AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Julian Seward jseward bzip org bzip2 libbzip2 version 1 0 5 of 10 December 2007 University of Illinois NCSA Open Source License Copyright c 1999 2007 The Board of Trustees of the University of Illinois All Rights Reserved Component Name License iperf 2 0 5 Iperf performance test Mark Gates Ajay Tirumala Jim Ferguson Jon Dugan Feng Qin Kevin Gibbs John Estabrook National Laboratory for Applied Network Research National Center for Supercomputing Applications University of Illinois at Urbana Champaign http www ncsa uiuc edu Permission is hereby granted free of charge to any person obtaining a copy of this software Iperf and associated documentation files the Software to deal in the S
13. 640x480 320x240 Max Framerate H 264 Max 30fps at all resolutions MJPEG 1280x1024 1280x960 1 280x720 1024x768 Max 1 fps Max 15fps at other resolution Video Quality Adjustment H 264 Target Bitrate Level Control MJPEG Quality Level Control Bitrate Control Method H 264 CBR or VBR MJPEG VBR Streaming Capability Multiple Streaming Up to 3 Profiles Audio In Built in Mic Line in i Coresi G 711 u law G 726 Selectable Format p G 726 ADPCM 8KHz G 711 8KHz G 726 16Kbps 24Kbps 32Kbps 40Kbps Audio Communication Uni directional IP IPv4 IPv6 TCP IP UDP IP RTP UDP RTP TCP RTCP RTSP NTP HTTP HTTPS Protocol SSL DHCP PPPoE FTP SMTP ICMP IGMP SNMPv1 v2c v3 MIB 2 ARP DNS DDNS QoS PIM SM UPnP Bonjour English _129 appendix Description Items SND L5013 SND L5083R SNO L5083R SNV L5083R HTTPS SSL Login Authentication Digest Login Authentication Security IP Address Filtering User access Log 802 1x Authentication Streaming Method Unicast Multicast Max User Access 6 users at Unicast Mode Micro SD SDHC Max 32G NAS motion Images recorded in the SD SDHC memory card can be Edge Strorage downloaded Manual recording at Local PC Network Application ONVIF Profile S G Programming Interface SUNAPIHTTP API English French German Spanish Italian Chinese Korean Russian Webpage Language Japanese Swedish D
14. All advertising materials mentioning features or use of this software must display the following acknowledgment This product includes software developed by the OpenSSL Projectfor use in the OpenSSL Toolkit http www openssl org 4 The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote products derived from this software without prior written permission For written permission please contact openssl core openssl org 5 Products derived from this software may not be called OpenSSL nor may OpenSSL appear in their names without prior written permission of the OpenSSL Project 6 Redistributions of any form whatsoever must retain the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http Awww openssl org THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLI
15. BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE The MIT License Some software components of this product incorporate source code covered under the MIT license as follows MIT License 2 0 Acewidget bettermeans jquery ui libxml libxml2 Mesa3D MesaLib mwEmbed OpenGL Samples Pack Wide Studio xorg server dropbear 2012 55 ncurses 5 7 Copyright c 2011 The Dojo Foundation Copyright 2010 AUTHORS txt http jqueryui com about Dual licensed under the MIT or GPL Version 2 licenses http query org license http docs jquery com Ul Widget Copyright Daniel Veillard Copyright Igor Zlatovic lt igor zlatkovic com gt Copyright Aleksey Sanin Copyright Gary Pennington lt Gary Pennington uk sun com gt Copyright Alfred Mickautsch lt alfred mickautsch de gt Copyright Bjorn Reese lt bjorn reese systematic dk gt Copyright Joel W Reed Copyright William Brack lt wbrack mmm com hk gt Copyright c 2007 2010 The Khronos Group Inc Copyright Atish Kumar Patra Copyright c 2006 Free Software Foundation Inc Mozilla Public License Permission is hereby granted free of charge to any person obtaining a copy of this
16. HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Copyright c 2006 Creative Labs Inc All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Neither the name of the Creative Labs nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE I
17. failure or malfunction or any and all other commercial damages or losses even if such Contributor has been advised of the possibility of such damages 9 Accepting Warranty or Additional Liability While redistributing the Work or Derivative Works thereof You may choose to offer and charge a fee for acceptance of support warranty indemnity or other liability obligations and or rights consistent with this License However in accepting such obligations You may act only on Your own behalf and on Your sole responsibility not on behalf of any other Contributor and only if You agree to indemnify defend and hold each Contributor harmless for any liability incurred by or claims asserted against such Contributor by reason of your accepting any such warranty or additional liability END OF TERMS AND CONDITIONS APPENDIX How to apply the Apache License to your work To apply the Apache License to your work attach the following boilerplate notice with the fields enclosed by brackets replaced with your own identifying information Don t include the brackets The text should be enclosed in the appropriate comment syntax for the file format We also recommend that a file or class name and description of purpose be included on the same printed page as the copyright notice for easier identification within third party archives Copyright yyyy name of copyright owner Licensed under the Apache License Version 2 0 the Licen
18. that new knowledge has been obtained b Contributor APIs If Contributor s Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API Contributor must also include this information in the LEGAL file c Representations Contributor represents that except as disclosed pursuant to Section 3 4 a above Contributor believes that Contributor s Modifications are Contributor s original creation s and or Contributor has sufficient rights to grant the rights conveyed by this License 3 5 Required Notices You must duplicate the notice in Exhibit in each file of the Source Code If it is not possible to put such notice in a particular Source Code file due to its structure then You must include such notice in a location such as a relevant directory where a user would be likely to look for such a notice If You created one or more Modification s You may add your name as a Contributor to the notice described in Exhibit A You must also duplicate this License in any documentation for the Source Code where You describe recipients rights or ownership rights relating to Covered Code You may choose to offer and to charge a fee for warranty support indemnity or liability obligations to one or more recipients of Covered Code However You may do so only on Your own behalf and not on behalf of the Initial Developer or any Contributor Y
19. the GPL clearly explains that there is no arranty for this free software For both users and authors sake the GPL requires that modified versions be marked as changed so that their problems will not be attributed erroneously to authors of previous versions Some devices are designed to deny users access to install or run modified versions of the software inside them although the manufacturer can do so This is fundamentally incompatible with the aim of protecting users freedom to change the software The systematic pattern of such abuse occurs in the area of products for individuals to use which is precisely where it is most unacceptable Therefore we have designed this version of the GPL to prohibit the practice for those products If such problems arise substantially in other domains we stand ready to extend this provision to those domains in future versions of the GPL as needed to protect the freedom of users Finally every program is threatened constantly by software patents States should not allow patents to restrict development and use of software on general purpose omputers but in those that do we wish to avoid the special anger that patents applied to a free program could make it ffectively proprietary To prevent this the GPL assures that atents cannot be used to render the program non free he precise terms and conditions for copying distribution and modification follow TERMS AND CONDITIONS 0 Definitions
20. 443 TCP The available setting range is 1024 65535 For security reasons in your Safari or Google Chrome browser you may not use 65535 as your HTTPS port e RTSP Used to transfer videos in the RTSP mode the default is 554 e Use timeout When connecting to RTSP this function resets the connection if there s no response for a certain time e Device port Set a port used to transfer video signals with the Samsung protocols 14 f changed the HTTP port the browser exits Afterwards address should contain the newly assigned HTTP port trailing the IP ex IP address 192 168 1 100 HTTP port Assigned 8080 http 192 168 1 100 8080 If HTTP port is set to 80 no need to specify the port number Using RTSP and HTTPS is recommended in order to prevent the image information from being restored 6 When done click Apply EE Event setup You can easily set the event detection items and move to the detailed setting 1 From the Setup menu select the lt Basic gt tab 2 Click lt Event setup gt 3 Activate desired items on the Event list 4 When done click Apply TA I 14 To make detailed event settings click on your desired settings Go to detailed lt Event gt setting 86_ setup screen VIDEO amp AUDIO SETUP Video setup 1 From the Setup menu select the lt Video amp Audio EJ gt tab 2 Click lt Video setup gt 3 Select a lt Video source gt mode
21. Affero General Public License Notwithstanding any other provision of this License you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work and to convey the resulting work The terms of this License will continue to apply to the part which is the covered work but the special requirements of the GNU Affero General Public License section 13 concerning interaction through a network will apply to the combination as such 14 Revised Versions of this License The Free Software Foundation may publish revised and or new versions of the GNU General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies that a certain numbered version of the GNU General Public License or any later version applies to it you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation If the Program does not specify a version number of the GNU General Public License you may choose any version ever published by the Free Software Foundation If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used that proxy s publi
22. Modifications made by that Contributor 3 Distribution Obligations 3 1 Application of License The Modifications which You create or to which You contribute are governed by the terms of this License including without limitation Section 2 2 The Source Code version of Covered Code may be distributed only under the terms of this License or a future version of this License released under Section 6 1 and You must include a copy of this License with every copy of the Source Code You distribute You may not offer or impose any terms on any Source Code version that alters or restricts the applicable version of this License or the recipients rights hereunder However You may include an additional document offering the additional rights described in Section 3 5 3 2 Availability of Source Code Any Modification which You create or to which You contribute must be made available in Source Code form under the terms of this License either on the same media as an Executable version or via an accepted Electronic Distribution Mechanism to anyone to whom you made an Executable version available and if made available via Electronic Distribution Mechanism must remain available for at least twelve 12 months after the date it initially became available or at least six 6 months after a subsequent version of that particular Modification has been made available to such recipients You are responsible for ensuring that the Source Code version remains a
23. OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 17 Interpretation of Sections 15 and 16 lf the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee OpenSSL Combined License The OpenSSL toolkit stays under a dual license i e both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit See below for the actual license texts Actually both licenses are BSD style Open Source licenses In case of any license issues related to OpenSSL please contact openssi core openssl org Component Name License openssl 1 0 1g OpenSSL Copyright c 1998 2011 The OpenSSL Project All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3
24. Play the AVI file in the chOO img YYYY_mm_DD AVI directory using a media player H2M3IA GAM 41 Computer gt amp Local Disk C bg LOCAL DISK D 14 m A filename starts with the format 001_ i ue Disk G YYYYMMDD_HHMMSS avi and the file 5 number is incremented by one A YYYYMMDD_HHMMSS indicates the start lia time of data saving Bali a 2013 07 02 001 YYYYMMDD HHMMSS smi file E Am is a caption file and you can view it if it L DAT exists in the same directory as its related AVI file Nome Datemodied Type Sue The max recording time per AVI file is 5 tr ee A MAI AA minutes Aii a Ae RE Once corrupted the data in the Micro SD memory card cannot be replayed in the Web Viewer s Playback English _75 Wed Viewer 2 NAS Network Attached Storage 1 In Windows browser use lt ip address gt to access ex 192 168 20 31 defaultfolder chO1 img 2013_07_02 AVI 2 Go to lt Computer gt lt Network drive connection gt Enter 1 41 Computer 4 amp 2 defaultfolder 192 168 20 31 4 2 chol D db M img 4 2013 07 02 3 Connected to the NAS b AVI The directory structure is same as the directory structure for a Micro SD memory card 4 a Name ate modifie e Size 001_20130702_160726 _ 001_20130702_160726 smi A filename starts with the format 001_ ORR Ant YYYYMMDD_HHMMSS avi and the file C m number is incr
25. a PPPoE Modem Connecting the Camera to a Broadband Router with the PPPoE Cable Modem Buttons used in IP Installer Static IP Setup Dynamic IP Setup Port Range Forward Port Mapping Setup Connecting to the Camera from a Shared Local PC Connecting to the Camera from a Remote PC via the Internet English _7 Overview 8_ overview WEB VIEWER SETUP SCREEN APPENDIX 62 64 64 65 67 70 77 77 87 96 105 111 121 126 127 132 136 138 Connecting to the Camera Password setting Login Installing STW WebViewer Plugin Using the Live Screen Playing the recorded video Setup Basic Setup Video amp Audio setup Network Setup Event Setup NAS Network Attached Storage guide System Setup Viewing profile information Specification Product Overview Troubleshooting Open Source Announcement PRODUCT FEATURES Dustproof Waterproof IP66 SNO L5083R SNV L5083R The dustproof and waterproof design makes you feel at ease when installing the product outdoors or exposing it to rain IR mode SND L5083R SNO L5083R SNV L5083R If the IR indicator turns on the product switches to the IR mode for preventing an object from being too bright which helps you identify the object in near distance Visibility 15m SND L5083R In BAW mode the IR indicator turns on with the effective visibility of 15m at O Lux Visibility 20m SNO L5083R SNV L5083R In BAW mode the IR indicator turns on with the
26. algorithm the resulting GIF files are larger than usual but are readable by all standard GIF decoders We are required to state that The Graphics Interchange Format c is the Copyright property of CompuServe Incorporated GIF sm is a Service Mark property of CompuServe Incorporated T Kernel License This Product uses the Source Code of T Kernel under T License granted by the T Engine Forum www t engine org T License License Agreement for Source Code of T Kernel Article 1 Scope of License Agreement 1 This License Agreement sets forth copyrights and the terms and conditions of use applicable to the source code of T Kernel distributed by T Engine Forum and any derivative work created therefrom Article 2 Definition 1 T Kernel means a real time operating system controlled and distributed by T Engine Forum on behalf of the copyright holder thereof 2 Source Code means a source program including related comments and documentations for the T Kernel and the Ported Source Code defined in Article 2 8 which is registered with T Engine Forum 3 Hardware dependent Part means the part of the Source Code which depends on hardware and needs to be changed when the Source Code is ported and operated on the target hardware and is designated and separated as such part 4 Compiler dependent Part means the part of the Source Code which depends on compiler and needs to be changed when the Source Code is ported and ope
27. and show c they could even be mouse clicks or menu items whatever suits your program You should also get your employer if you work as a programmer or your school if any to sign a copyright disclaimer for the program if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest in the program Gnomovision which makes passes at compilers written by James Hacker signature of Ty Coon 1 April 1989 Ty Coon President of Vice This General Public License does not permit incorporating your program into proprietary programs If your program is a subroutine library you may consider it more useful to permit linking proprietary applications with the library If this is Lwihcaetn ysoeu want to do use the GNU Lesser General Public instead of this License GNU GENERAL PUBLIC LICENSE Version 3 29 June 2007 Copyright C 2007 Free Software Foundation Inc lt http fsf org gt Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The GNU General Public License is a free copyleft license for software and other kinds of works The licenses for most software and other practical works are designed to take away your freedom to share and change the works By contrast the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program to make sure it re
28. and this License would be to refrain entirely from distribution of the Program If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 8 If the distribution and or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written
29. digital voice transfer in PSTN network or through a PBX G 726 ITU standard audio codec applying ADPCM Adaptive Differential Pulse Code Modulation for variable bit rates of 40 32 24 16 Kops to 64 Kbps PCM encoding e Bitrate Set the bit rate to differentiate compression ratio if using G 726 codec e Gain Specify the audio input amplification u Sound quality deterioration or howling may occur if the loudness of the sound source or gain value were set excessively 4 When done click Apply TA I 88_ setup screen Audio setup SNO L5083R SNV L5083R You can configure the input values of an audio connected to a camera 1 From the Setup menu select the lt Video amp Audio EX gt tab 2 Click lt Audio setup gt 3 Set the audio input value Source Sets the audio input Line Connect the cable to the audio device N3149S dNLAS External microphone 3 5 pi jack type external MIC Apply power to Ext Mic If the external microphone connected has no separate power supply check this option to set camera to supply power to the connected external microphone The option is enabled if lt External microphone gt is selected Codec Specify the audio codec G 711 A audio codec standard it uses 64 Kbps PCM Pulse Code Modulation encoding ITU standard audio codec that is adequate for digital voice transfer in PSTN network or through a PBX G 726 ITU standard audio codec
30. e Flip mode Turn upside down the image that is captured by the camera e Mirror mode Flip horizontal the image that is captured by the camera e Hallway view Rotates a video that was taken from a camera by a specified angle Possible to rotate 0 90 and 270 degrees f the setting is changed the browser window will be closed Try to connect again after a while N3149S dN1 S Ki m Video output is not supported for the hallway view by SPD 100 400 4 Specify the privacy zone 5 When done click Apply To set the privacy zone You can specify a certain area of the camera video to be protected for your privacy 1 Set it to lt On gt 2 When dore click Apply 3 Click and drag the desired region on the video 4 Enter the name and select the color and then click OK 5 If you want to delete a name in the list select it and click Delete EX English _87 Setup Screen Audio setup SND L5013 SND L5083R You can configure the input values of an audio connected to a camera 1 From the Setup menu select the lt Video amp Audio EJ gt tab 2 Click lt Audio setup gt 3 Set the audio input value e Source Sets the audio input Internal microphone Microphone that is built in in the camera e Codec Specify the audio codec G 711 A audio codec standard it uses 64 Kbps PCM Pulse Code Modulation encoding ITU standard audio codec that is adequate for
31. have executed with Licensor regarding such Contributions 6 Trademarks This License does not grant permission to use the trade names trademarks service marks or product names of the Licensor except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file 7 Disclaimer of Warranty Unless required by applicable law or agreed to in writing Licensor provides the Work and eachContributor provides its Contributions on an AS IS BASIS WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND either express or implied including without limitation any warranties or conditions of TITLE NONINFRINGEMENT MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License 8 Limitation of Liability In no event and under no legal theory whether in tort including negligence contract or otherwise unless required by applicable law such as deliberate and grossly negligent acts or agreed to in writing shall any Contributor be liable to You for damages including any direct indirect special incidental or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work including but not limited to damages for loss of goodwill work stoppage computer
32. in the body of this License 9 The Free Software Foundation may publish revised and or new versions of the General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Program does not specify a version number of this License you may choose any version ever published by the Free Software Foundation 10 If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PR
33. is not matched when you change the admin password you cannot change the password After changing your password if there is a camera connected to a CMS or NVR client then you need to re register it with the newly changed password If the camera is still connected with the same password then the account may be locked because a client uses the previous password m If you try to login with the registered account 5 or more consecutive password authentication has failed and then the account may be locked for thirty seconds When the password is changed while multiple connections are active from a PC the browser may malfunction In that case reconnect to the server e Guest setup If you select lt Enable guest access the guest account can access the Web viewer screen but can only view the live Viewer screen The ID password for the guest account is lt guest guest gt which cannot be changed e Authentication setup If you select lt Enable RTSP connection without authentication gt you can access RTSP without logging in and view the video e Current users If you select lt Use gt you can set or change the user permissions Profile If you select lt Default gt you can only see the default profile video if selecting lt All gt you can see the full profile videos m ONVIF functions available to a registered user allowed to use ONVIF functions are limited to those of granted with permission Video Transfer and Ch
34. is set other than 80 you must provide the lt Port gt number in the address bar of the Internet browser before you can access the camera ex http IP address HTTP Port htto 192 168 1 100 8080 56_ network connection and setup Auto Network Setup Run lt IP Installer_v2 XX exe gt to display the camera search list At the initial startup both Auto Set and Manual Set will be grayed out 14 For cameras found with the IPv6 setting these buttons will be grayed out as the cameras do not support this function 1 Select a camera in the search list Gerri F IP CAMERA W NVA Check the MAC address of the camera on the camera s label Both the Auto Set and Manual Set buttons will be activated 2 Click Auto Set The Auto Setting dialog appears SSS Sales The lt IP Address gt lt Subnet Mask gt and lt Gateway gt will be set automatically 3 Enter the password Auto Setting Enter the password of admin account Network Information which was used to access the camera IP Address i Subnet Mask m For the security purposes you are uenoi Mask Les 8 ihe Gat EA recommended to use a combination REN of numbers alphabets uppercase and CP Seting HR lowercase and special characters for your a Password password e f you want to change the password refer Cancel to Administrator password change of the user setup page 82 4 Click OK A
35. like automatically in response to a request from the public and 8 to distribute a copy of a work to the general public or a large number of specific persons Article 3 Copyright 1 The copyrights of the Source Code shall be owned by Ken Sakamura Article 4 License of Source Code 1 As provided for in this Article T Engine Forum shall provide and grant a license to use the Source Code free of charge to any person who has taken the necessary procedure for registration as prescribed by T Engine Forum and agreed to the T License 2 The Source Code shall be distributed exclusively by T Engine Forum Any person who obtains the Source Code under Article 4 1 above shall not make any re Distribution of the Source Code 3 In accordance with the license granted under Article 4 1 above the Source Code User may perform the following acts 1 to copy and or modify the Source Code provided by T Engine Forum hereunder for its own research development and the like 2 to run the Source Code provided by T Engine Forum hereunder for its own research development and the like 8 to run the Source Code modified in accordance with the provision of Article 4 3 1 above for its own research development and the like 4 to distribute the Binary Code created from the Source Code provided by T Engine Forum hereunder or from the Source Code modified in accordance with the provision of Article 4 3 1 above 4 In accordance with the
36. local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Dz Correct disposal of batteries in this product Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free battery return system SALES NETWORK SAMSUNG TECHWIN CO LTD 6 Pangyo ro 319beon gil Bundang gu Seongnam si Gyeonggi do SEOUL 463 400 Rep of KOREA Tel 82 70 7147 8753 8764 Fax 82 31 8018 3740 www samsungsecurity com SAMSUNG TECHWIN AMERICA Inc SAMSUNG TECHWIN EUROPE LTD 100 Challenger Rd Suite 700 Ridgefield Park NJ 07660 2nd Floor No 5 The Heig
37. object color or brightness is similar to the background Small activities around the border area of the camera s field of view Multiple movements continue occurring at random due to a scene change rapid lighting changes or other reasons A fixed object continues moving in the same position Motions of less position changing such as approaching to the camera or fading away from the camera Moving object approaches to the camera too close An object hides other objects behind Two or more objects overlap or one object divides in multiple portions Too fast object for a proper detection one object should be found overlapping between contiguous frames Reflection blur shadow due to a strong light such as direct sunlight illumination or headlamp In severe snow rain wind or in dawn dusk 118_ setup screen To use Motion detection It detects a motion that meets all conditions specified by sensitivity size and area 1 Select a motion detection mode 2 Select lt Sensitivity gt tab to set the sensitivity level You can set the sensor s sensitivity to detect a motion out of the background from the monitoring video N3149S dN1 S m n a situation that definitely distinguishes objects out of backgrounds set this to a low sensitivity level For opposite case that is hard to distinguish objects like low illuminated situation set this to a high level 3 Select lt Size gt tab You can limit the minimum ma
38. or collective works based on the Program In addition mere aggregation of another work not based on the Program with the Program or with a work based on the Program on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 You may copy and distribute the Program or a work based on it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following a Accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or b Accompany it with a written offer valid for at least three years to give any third party for a charge no more than your cost of physically performing source distribution a complete machinereadable copy of the corresponding source code to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or c Accompany it with the information you received as to the offer to distribute corresponding source code This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer in accord with Subsection b above The source code for a work means the preferred form of the work for making modifications to it For an exec
39. searching automatically 1 From the Setup menu select the lt Network EI gt tab 2 Click lt Auto IP configure gt 3 Set the lt Link Local IPv4 address gt An additional IP address may be assigned to assess the camera from the Link Local network e Auto configure It specifies Able or Disable for the Link Local IPv4 address e P address Display the assigned IP address e Subnet mask Display the subnet mask of the assigned IP 4 Set the lt UPnP discovery gt Cameras can be automatically searched in the client and operating system in support of the UPnP protocol e UPnP discovery It specifies Able or Disable for UPnP Discovery e Friendly name Display the camera name Friendly name is displayed in the format of SAMSUNG lt Model Name gt lt MAC Address gt 14 Inthe Windows operating system which basically supports UPnP the cameras connected to the network are displayed 5 Set the lt Bonjour gt Cameras can be automatically searched in the client and operating system in support of the Bonjour protocol e Bonjour It specifies Able or Disable for Bonjour e Friendly name Display the camera name Friendly name is displayed in the format of SAMSUNG lt Model Name gt lt MAC Address gt 14 Inthe Mac operating system which support Bonjour by default the connected cameras are automatically displayed in the Bonjour bookmark of the Safari web browser If the Bonjour bookmark is not displ
40. shall be liable for any damages including but not limited to damages resulting from loss of profit business interruption loss of business information or any other pecuniary damage arising out of use or impossibility of use of the Source Code even if T Engine Forum and the copyright holder have been informed of the possibility of such damages Article 10 Breach of Agreement 1 In case that T Engine Forum considers that this License Agreement is breached or that the popularization of T Kernel is obstructed T Engine Forum shall take measures to correct such breach or such obstruction take measures on the ground of copyright infringement or take any other necessary measures against the breaching person or the obstructing person regardless of whether or not the said person is a member of T Engine Forum 2 In case of breach of this License Agreement by a member of T Engine Forum T Engine Forum may take appropriate measures against the member for example the member is disqualified from membership depending on what kind of breach has been committed by it 3 Any legal dispute which may arise in relation to any breach of this License Agreement shall be subject to the exclusive jurisdiction of the Tokyo District Court Article 11 Governing Law and Language 1 This License Agreement shall be governed by and interpreted under the laws of Japan 2 This License Agreement is executed in both Japanese text and English text provid
41. software under which you make payment to the third party based on the extent of your activity of conveying the work and under which the third party grants to any of the parties who would receive the covered work from you a discriminatory patent license a in connection with copies of the covered work conveyedby you or copies made from those copies or b primarily for and in connection with specific products or compilations that contain the covered work unless you entered into that arrangement or that patent license was granted prior to 28 March 2007 Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law 12 No Surrender of Others Freedom If conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of thisLicense If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not convey it at all For example if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program 13 Use with the GNU
42. software and associated documentation files the Software to deal in the Software without restriction including without limitation the rights to use copy modify merge publish distribute sublicense and or sell copies of the Software and to permit persons to whom the Software is furnished to do so subject to the following conditions The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM DAMAGES OR OTHER LIABILITY WHETHER IN AN ACTION OF CONTRACT TORT OR OTHERWISE ARISING FROM OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE Since we at Samsung Techwin used the Mozilla Firefox component without modifying the source code according to the MOZILLA Public license 1 1 we are not obliged to provide the source code of the corresponding component e Version 1 1 1 Definitions 1 0 1 Commercial Use means distribution or otherwise making the Covered Code available to a third party 1 1 Contributor means each entity that creates or contributes to the creation of Modifications 1 2 Contributor Version means the combination of the Or
43. starting from the time point the images will be transferred You can specify up to 5 seconds before the occurrence of the event Post event duration Specify the time point after the occurrence of the event to the specified time point the images will be transferred You can specify up to 120 seconds after the occurrence of the event Record file type It specifies the file format of the recorded images STW It is Samsung Techwin s unique file format AVI It is the conventional avi format w m f the Record file type is changed the existing data is formatted Overwrite If the Micro SD memory is full this will delete old data and store new data in replacement Auto delete Data for a certain period is deleted while other data is not deleted This can be set within the range of one day to 180 days m m f the storage period is expired data is automatically deleted and new data will be recorded Once deleted it cannot be recovered 108_ setup screen 5 Set lt SD File System gt e Type The camera supports VFAT and EXT4 for the SD card file system which can be set by the user However a separate application is required that allows the EXT4 file system to interact with the Windows OS m Ifthe setting is changed the existing data will be formatted ttakes up to 10 minutes to format the SD card in the ext4 file system 6 Specify the lt Normal record setup gt e Always Always save recorded video in
44. submitted means any form of electronic verbal or written communication sent to the Licensor or its representatives including but not limited to communication on electronic mailing lists source code control systems and issue tracking systems that are managed by or on behalf of the Licensor for the purpose of discussing and improving the Work but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as Not a Contribution Contributor shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work 2 Grant of Copyright License Subject to the terms and conditions of this License each Contributor hereby grants to You a perpetual worldwide non exclusive no charge royalty free irrevocable copyright license to reproduce prepare Derivative Works of publicly display publicly perform sublicense and distribute the Work and such Derivative Works in Source or Object form 3 Grant of Patent License Subject to the terms and conditions of this License each Contributor hereby grants to You a perpetual worldwide non exclusive no charge royaltyfree irrevocable except as stated in this section patent license to make have made use offer to sell sell import and otherwise transfer the Work where such license applies only to those patent claims licensable by such Contrib
45. the following conditions are met 1 Redistributions of source code must retain the copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgement This product includes cryptographic software written by Eric Young eay cryptsoft com The word cryptographic can be left out if the rouines from the library being used are not cryptographic related 4 If you include any Windows specific code or a derivative thereof from the apps directory application code you must include an acknowledgement This product includes software written by Tim Hudson tjn cryptsoft com THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETH
46. the set frame rate ATC Show the ATC status Concurrent users count Show the number of concurrent users who access the profile e Current users Shows information on users accessing web viewer and displaying monitoring video Profile Show the name of the profile accessed by the user Bitrate kbps Show the current bit rate Network connection status It shows whether the network is working fine IP Show the IP address of the current user 14 To check information on the profile currently used click Status again to refresh it It takes a certain time for any changes to be applied 126_ setup screen apoendix SPECIFICATION Description Items SND L5013 SND L5083R SNO L5083R SNV L5083R Imaging Device 1 3 1 37M CMOS gt ae Total Pixels 1 312 H x 1 069 V au x lt Effective Pixels 1 305 H x 1 049 V Scanning System Progressive Video Color 0 085 Lux 1 3088 Color 0 04 Lux 1 30sec F1 4 0 001 Lux 2see F1 8 0 0008 F4 Min Illumination Lux 2sec F1 8 B W 0 085 Lux B W 0 Lux IR LED on 1 30sec F1 8 Focal Length Zoom dE 2 8 12mm V F Ratio Max Aperture Ratio F1 8 F1 4 H 74 V 58 H 88 2Wide 28 6 Tele Angular Field of View D 97 V 69 4 Wide 23 0 Tele Lens D 117 3 Wide 36 2 Tele Min Object Distance 0 5m Focus Control Manual Lens Type Fixed DC auto iris Mount Type Board type Pan R
47. to off position in settings or if you connect a camera to an unstable power source the Micro SD card may be damaged m m After operation in record mode you are limited to 2 simultaneously accessible profiles and to 3 connected users However existing users will be sustained English _107 Setup screen To make recording on the Micro SD memory 1 Set the SD card unit to lt On gt 2 Click the Apply EZH button 3 Check the memory card s lt Free size gt and lt Total size gt You can format the Micro SD card by clicking the lt Format gt button Some frames may be skipped if the Micro SD memory card operates at the lower speed than recommended For more details refer to Recommended Micro SD SDHC Memory Card Specifications Page 11 For a Micro SD memory card with a large capacity the formatting will be slowed down accordingly The data traffic will increase when the camera is set to higher resolution higher bit rate and or higher framerate If there is too much data traffic some frame may be skipped although it is stored in a full frame When a frame skip occurs images are saved at the rate of min one image per sec 4 Specify the storage action Record profile Shows recording profile s codec type Normal Make recording at a certain frame rate Event Set the recording type for a certain event that occurs Pre event duration Specify the time point before the occurrence of the event
48. to covered code created under this License zlib libpng License URL http www php net distriobutions 6 Redistributions of any form whatsoever must retain the following acknowledgment This product includes PHP software freely available from lt http Awww php net software gt THIS SOFTWARE IS PROVIDED BY THE PHP DEVELOPMENT TEAM AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE PHP DEVELOPMENT TEAM OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE This software consists of voluntary contributions made by many individuals on behalf of the PHP Group The PHP Group can be contacted via Email at group php net For more information on the PHP Group and the PHP project please see lt http www php net gt PHP includes the Zend Engine freely available at lt http Awww zend com gt This software is provided as is without any express or implied
49. 3R 89 3 5 53 9 2 12 _ 98 8 3 89 Unit mm inch English _133 XIGNAddV apoendix SNO L5083R Unit mm inch 259 3 10 21 152 0 5 98 N 130 2 5 13 RER j 246 0 9 69 70 0 2 76 3 5 5 HOLES 65 5 2 58 BODY 77 6 3 06 75 2 2 96 134_ appendix SNV L5083R 106 1 4 17 _ 137 5 39 _ I 1 gt A N x N l N 7 AN 1 100 3 93 English _135 XIGNAddV appendix TROUBLESHOOTING PROBLEM can t access the camera from a web browser SOLUTION e Check to make sure that the camera s Network settings are appropriate e Check to make sure that all network cables have been connected properly e f connected using DHCP verify that the camera is able to acquire dynamic IP addresses without any problem e lf the camera is connected to a Broadband Router verify that port forwarding is properly configured Viewer got disconnected during monitoring cannot connect to the system using a tab browser of Internet Explorer 7 0 The camera connected to the network is not detected in the IP installer program e Connected Viewers become disconnected upon any change to camera or network configurations e Check all network connections e f the ca
50. 7 PHP 3 01 Redistribution and use in source and binary forms with or without modification is permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 The name PHP must not be used to endorse or promote products derived from this software without prior written permission For written permission please contact group php net 4 Products derived from this software may not be called PHP nor may PHP appear in their name without prior written permission from group php net You may indicate that your software works in conjunction with PHP by saying Foo for PHP instead of calling it PHP Foo or phpfoo 5 The PHP Group may publish revised and or new versions of the license from time to time Each version will be given a distinguishing version number Once covered code has been published under a particular version of the license you may always continue to use it under the terms of that version You may also choose to use such covered code under the terms of any subsequent version of the license published by the PHP Group No one other than the PHP Group has the right to modify the terms applicable
51. 995 consisting of commercial computer software and commercial computer software documentation as such terms are used in 48 C F R 12 212 Sept 1995 Consistent with 48 C FR 12 212 and 48 C FR 227 7202 1 through 227 7202 4 June 1995 all U S Government End Users acquire Covered Code with only those rights set forth herein 11 MISCELLANEOUS This License represents the complete agreement concerning subject matter hereof If any provision of this License is held to be unenforceable such provision shall be reformed only to the extent necessary to make it enforceable This License shall be governed by California law provisions except to the extent applicable law if any provides otherwise excluding its conflictof law provisions With respect to disputes in which at least one party is a citizen of or an entity chartered or registered to do business in the United States of America any litigation relating to this License shall be subject to the jurisdiction of the Federal Courts of the Northern District of California with venue lying in Santa Clara County California with the losing party responsible for costs including without limitation court costs and reasonable attorneys fees and expenses The application of the United Nations Convention on Contracts for the International Sale of Goods is expressly excluded Any law or regulation which provides that the language of a contract shall be construed against the drafter shall
52. Description DDNS URL address enabling access from the external Internet URL However this will be replaced with the lt IP Address gt of the camera if DDNS registration has failed 8 IPv4 scans for cameras with the IPv4 setting 9 IPv6 scans for cameras with the IPv6 setting Activated in an IPv6 compliant environment only 10 Search Scans for cameras that are currently connected to the network However this button will be grayed out if neither IPv4 nor IPv6 is checked 11 Auto Set The IP Installer automatically configures the network settings 12 Manual Set You should configure the network settings manually 13 Exit Exits the IP Installer program 14 For the IP installer use only the installer version provided in the installation CD or use the latest one if available You can download the latest version from the Samsung web site www samsungcctv com STATIC IP SETUP Manual Network Setup Run lt IP Installer_v2 XX exe gt to display the camera search list At the initial startup both Auto Set and Manual Set will be grayed out 14 For cameras found with the IPv6 setting these buttons will be grayed out as the cameras do not support this function 1 Select a camera in the search list a RE Check the MAC adaress of the camera a TE ee on the camera s label Both the Auto Set and Manual Set buttons will be activated 2 Click Manual Set The Manual Setting dial
53. ER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE The licence and distribution terms for any publically available version or derivative of this code cannot be changed i e this code cannot simply be copied and put under another distribution licence including the GNU Public Licence BSD License Some software components of this product incorporate source code covered under the BSD license as follows Component Name License URL net snmp 5 7 1 BSD pcre 8 20 BSD openssh 5 9p1 BSD libcap 1 2 1 BSD 2 0 lighttpd 1 4 35 BSD 2 0 Game ws BSD 2 0 MiniUPnP Project Client BSD 2 0 pppd 2 4 5 BSD 2 0 lighttpd is a secure fast compliant and very flexible webserver that has been optimized for high performance environments It has a very low memory footprint compared to other webservers and takes care of cpuload Its advanced feature set FastCGI CGI Auth Output Compression URL Rewriting and many more make lighttpd the perfect webserver software for every server that suffers load problems Simple Network Management Protocol SNMP is an Internetstandard protocol for managing devices on IP networks It is used mostly in network management systems to monitor the devices attached to the network for conditions that need administrative attention Net SNMP is a suite of applications used to implement SNMP v1 SN
54. GENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE This product includes cryptographic software written by Eric Young eay cryptsoft com This product includes software written by Tim Hudson th cryptsoft com Original SSLeay License Copyright C 1995 1998 Eric Young eay cryptsoft com All rights reserved This package is an SSL implementation written by Eric Young eay cryptsoft com URL Combined License http www openssl org source The implementation was written so as to conform with Netscapes SSL This library is free for commercial and non commercial use as long as the following conditions are aheared to The following conditions apply to all code found in this distribution be it the RC4 RSA lhash DES etc code not just the SSL code The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson th cryptsoft com Copyright remains Eric Young s and as such any Copyright notices in the code are not to be removed If this package is used in a product Eric Young should be given attribution as the author of the parts of the library used This can be in the form of a textual message at program startup or in documentation online or textual provided with the package Redistribution and use in source and binary forms with or without modification are permitted provided that
55. MP v2c and SNMP v3 using both IPv4 and IPv6 For more additional information send email to help cctv samsung com Copyright C 2004 Kneschke incremental All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution Neither the name of the incremental nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILI
56. OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Part 9 ScienceLogic LLC copyright notice BSD Copyright c 2009 ScienceLogic LLC All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions aremet yy Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer yy Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution yy Neither the name of ScienceLogic LLC nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING
57. OGRAM ASIS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAMPROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 12 INNO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program and you want it to be of the greatest possible use to the public the best way to achieve this is to make it free software which everyone can redistribute and change under these terms To do so attach the following notices to the program It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a point
58. OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Part 7 Fabasoft R amp D Software Software GmbH amp Co KG copyright Notice BSD Copyright c Fabasoft R amp D Software GmbH amp Co KG 20030ss fabasoft com Author Bernhard Penz Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met yy Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer yy Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution yy The name of Fabasoft R amp D Software GmbH amp Co KG or any of its subsidiaries brand or product names may not be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTER
59. P page 85 English _51 network connection and setup CONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE CABLE MODEM This is for a small network environment such as homes SOHO and ordinary shops PPPoE or Cable Modem External Remote PC PPPoE or Broadband Cable Modem Router DDNS Server Data Center KOREA Local PC Configuring the network settings of the local PC connected to a Broadband Router Configuring the network settings of the local PC connected to a Broadband Router follow the instructions below e Select lt Network gt gt lt Properties gt gt lt Local Area Connection gt gt lt General gt gt lt Properties gt gt lt Internet Protocol TCP IP gt gt lt Properties gt gt lt Obtain an IP address automatically gt or lt Use the following IP address gt e Follow the instructions below if you select lt Use the following IP address gt ex1 If the address LAN IP of the Broadband Router is 192 168 1 1 IP address 192 168 1 100 Subnet Mask 255 255 255 0 Default Gateway 192 168 1 1 ex2 If the address LAN IP of the Broadband Router is 192 168 0 1 IP address 192 168 0 100 Subnet Mask 255 255 255 0 Default Gateway 192 168 0 1 ex3 If the address LAN IP of the Broadband Router is 192 168 xxx 1 IP address 192 168 xxx 100 Subnet Mask 255 255 255 0 Default Gateway 192 168 xxx 1 14 For the address of the Broadband Rou
60. PLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSEARE DISCLAIMED IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Copyright c 1988 1989 1990 1991 1993 1994 1995 1996 The Regents of the University of California All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Neither the name of the Regents of the University of California nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
61. Processing Article 6 Distribution and Registration of the Ported Source Code 1 The Source Code User and the System Developer may whether with or without charge distribute to any third party only the following parts of the Ported Source Code on the T Engine Hardware or the Similar Hardware to T Engine Hardware 1 The Hardware dependent Part and or Compiler dependent Part provided that the Source Code User and the System Developer shall inform T Engine Forum of and T Engine Forum may publish a method for distributing said Part s to third parties 2 The Header File provided that the Header File shall be distributed together with the Binary Code of the Ported Source Code 2 Any member of T Engine Forum may request T Engine Forum to register and distribute as an original source code for T Kernel the Ported Source Code on the T Engine Hardware or the Similar Hardware to T Engine Hardware 3 Any member of T Engine Forum who requests the distribution mentioned in the preceding paragraph shall accede to the following conditions 1 The member shall confirm that the object hardware is the T Engine Hardware or the Similar Hardware to T Engine Hardware 2 The member shall provide T Engine Forum with a complete set of operational environment for the object hardware and T Kernel free of charge when requesting the distribution 3 The member shall submit test results of the Ported Source Code to T Engine Forum when reques
62. RUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Part 8 Apple Inc copyright notice BSD Copyright c 2007 Apple Inc All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Neither the name of Apple Inc Apple nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL APPLE OR ITSCONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS
63. Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer yy Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution yy Neither the name of the Sun Microsystems Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Part 5 Sparta Inc copyright notice BSD Copyright c 2003 2009 Sparta Inc All rights reserved Redistribution and use in source and binary forms with or without mod
64. S PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Copyright c 2005 2012 Thomas BERNARD All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Neither the name of Thomas BERNARD nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written perm
65. Service The following terms and conditions govern the iPOLIS Membership www samsungipolis co kr provided by Samsung Techwin Limited Company the Company and the benefits available thereunder the Service 1 2 Effectuation and Revision of Terms of Service 1 2 1 This Terms of Service will be effective by announcement on the Service or notification through email to the individual Member 1 2 2 The Company may revise this agreement without prior notice to the Members in case of crucial situation and the revised terms and conditions will be effective with notification in the same manner described in 1 2 1 1 2 3 If any Member in disagreement with the revised terms and conditions can request disenroliment otherwise the Comnanv will treat Member s use as accentance of the revised terms and conditions since thev continue to henefit the El Are WHAT IS IPOLIS PRODUCT DDNS SERVICE MY DDNS DDNS SERVICE VIDEO TAG OICE OF THE PERFECT NETWORKING MY DDNS CJ HOME gt DDNS SERVICE gt MY DDNS Current product list is displayed If wanted product is not in the list click Product Registration at the botton NO Product ID MODEL LOCATION STATUS VIEW MANAGEMENT VIDEOTAG nothing PRODUCT REGISTRATION gt MY DDNS HOWE gt DDNS Service gt MY DDNS Register a new IPOLIS product and manage your videos in real time Mandatory Information gt Create an Product ID of 4 to 20 characters in length con
66. TY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Copyright c 1998 2001 University College London All rights reserved http www net snmp org about license html http www kernel org pub linux libs security linux privs libcap2 http www opensource org licenses bsd license html http opensource org licenses BSD 3 Clause Redistribution and use in source and binary forms with or without modification is permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgement This product includes software developed by the Computer Science Department at University College London 4 Neither the name of the University nor of the Department may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IM
67. WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING WITHOUT LIMITATION WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS MERCHANTABLE FIT FOR A PARTICULAR PURPOSE OR NON INFRINGING THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT YOU NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR ASSUME THE COST OF ANY NECESSARY SERVICING REPAIR OR CORRECTION THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER 8 TERMINATION 8 1 This License and the rights granted hereunder will terminate automatically if You fail to comply with terms herein and fail to cure such breach within 30 days of becoming aware of the breach All sublicenses to the Covered Code which are properly granted shall survive any termination of this License Provisions which by their nature must remain in effect beyond the termination of this License shall survive 8 2 If You initiate litigation by asserting a patent infringement claim excluding declatory judgment actions against Initial Developer or a Contributor the Initial Developer or Contributor against whom You file such action is referred to as Participant alleging that a such Participant s Contributor Version directly or indirectly infringes any patent then any and all rights granted by such Partici
68. ame 0 Several P Frames e Profile You can select the H 264 profiling method e Entropy coding Reduce the possible compression loss due to encoding e Multicast SVNP Specify the use of the SVNP protocol IP address Enter an IPv4 address with which you can connect to the IPv4 network Port Specify the video communication port TTL Set the TTL for the SVNP packet e Multicast RTP Specify the use of the RTP protocol IP address Enter an IPv4 address with which you can connect to the IPv4 network Port Specify the video communication port TTL You can set the TTL for the RTP packet K m f you set the Multicast address to 224 0 0 0 224 0 0 255 multicast may not work properly in all environments In that case we recommend you change the multicast address What is GOV length GOV Group of Video object planes is a set of video frames for H 264 compression indicating a collection of frames from the initial Frame key frame to the next I Frame GOV consists of 2 kinds of frames I Frame and P Frame Frame is the basic frame for the compression also Known as Key Frame which contains one complete image data P Frame contains only the data that has changed from the preceding Frame For H 264 codec you can determine the GOV length If you set a recording profile with H 264 codec the GOV length will be framerate 2 English _81 N3149S dNLAS Setup screen User 1 From the Setup menu
69. ange 0 350 0 350 Pan Tilt Rotate Tilt Range 0 67 0 67 Rotate Range 0 355 0 355 English _127 appendix Operational Description Items SND L5013 SND L5083R SNO L5083R SNV L5083R IR Viewable Length 15m 20m Camera Title Off On Displayed up to 15 characters Day amp Night Electric Day amp True Day amp Night Night Backlight Off BLC Compensation Contrast Enhancement SSDR Samsung Super Dynamic Range Off On Digital Noise Reduction SONR Off On Motion Detection Off On 4ea rectangler zones Privacy Masking Off On 6ea rectangler zones Gain Control Off Low Medium High White Balance ATW AWC Manual Indoor Outdoor LDC Lens distortion 0 off 5 levels with Mir Max correction Electronic Shutter Minimum Maximum Anti ficker Speed Flip Mirror Flip Mirror Hallway view intelligent Video Motion Detection with metadata Tampering Analytics Alarm Triggers Motion detection Tampering Detection SD card error NAS error e File upload via FTP E Mail Alarm events e Notification via E Mail e Local storage recording at Event 128_ appendix Network Description Items SND L5013 SND L5083R SNO L5083R SNV L5083R Ethernet RJ 45 10 100BASE T 9 Video Compression H 264 MJPEG x Format m 1280x1024 1280x960 1280x720 1024x768 800x600 720x576 5 Resolution
70. anging Video Information Set the profile to lt All gt 4 When done click Apply English _83 N3149S dNLAS Setup screen Date amp Time 1 From the Setup menu select the lt Basic gt tab 2 Click lt Date amp Time gt 3 Specify the time and date that will be applied to the camera e Current system time Displays the current time settings of your system e Timezone Specify the local time zone based on the GMT e Use daylight saving time If checked the time will be set one hour before the local time zone for the specified time period This option will be displayed only in areas where DST is applied e System time setup Specify the time and date that will be applied to your system Manual Specify the time manually Synchronize with NTP server Sync with the time of the specified server address Synchronize with PC viewer Sets to the time of the computer connected 4 When done click Apply TA I m When lt Synchronize with PC viewer gt is selected please set a standard time zone for both PC and camera 84_ setup screen IP amp Port 1 From the Setup menu select the lt Basic gt tab 2 Click lt IP amp Port gt 3 Set the lt IPv4 setup gt e P type Select an IP connection type Manual Specify the IP address Subnet mask Gateway DNS1 and DNS2 DHCP Specify the DNS1 and DNS2 PPPoE Specify the DNS1 DNS2 ID and Pass
71. angle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the product 4 overview Battery Batteries battery pack or batteries installed shall not be exposed to excessive heat such as sunshine fire or the like Disconnection Device Disconnect the main plug from the apparatus if it s defected And please call a repair man in your location When used outside of the U S it may be used HAR code with fittings of an approved agency is employed CAUTION Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions MAIAYSAO These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so Please use the input power with just one camera and other devices must not be connected The ITE is to be connected only to PoE networks without routing to the outside plant English _5 Overview Please read the following recommended safety precautions carefully Do not place this apparatus on an uneven surface e Do not install on a surface where it is exposed to direct sunlight near heating equipment or heavy cold area e Do not place this apparatus near conductive material e Do not attempt to service thi
72. applying ADPCM Adaptive Differential Pulse Code Modulation for variable bit rates of 40 32 24 16 Kops to 64 Kops PCM encoding Bitrate Set the bit rate to differentiate compression ratio if using G 726 codec Gain Specify the audio input amplification Sound quality deterioration or howling may occur if the loudness of the sound source or gain value were set excessively 4 When done click Apply English _89 Setup screen Camera setup You can change the camera settings according to the environment where the camera is located 1 From the Setup menu select the lt Video amp Audio EJ gt tab 2 Click lt Camera setup gt 3 Configure the settings as necessary of Sensor SSDR White balance Back light Exposure Day Night Special OSD IR 4 When done click Apply EZH I f a certain time timeout 240s is elapsed with your not pressing the Apply HEE button after changing the settings your changes will not be applied To Set the Sensor It specifies how many frames the camera CMOS sensor will capture per second 1 Select lt Sensor gt SEE 2 Select lt Mode gt i 14 Refer to Video profile for the framerate setup range of the lt Video profile gt according to mode setup Page 77 To Set SSDR Samsung Super Dynamic Range In a scene where the difference between bright and dark is severe you can increase the brightness of the dark area alone to regulat
73. at jpeg info uunet uu net to be added to our electronic mailing list Mailing list members are notified of updates and have a chance to participate in technical discussions etc This software is the work of Tom Lane Philio Gladstone Jim Boucher Lee Crocker Julian Minguillon Luis Ortiz George Phillips Davide Rossi Guido Vollbeding Ge Weijers and other members of the Independent JPEG Group IG is not affiliated with the official ISO JPEG standards committee LEGAL ISSUES In plain English 1 We don t promise that this software works But if you find any bugs please let us know 2 You can use this software for whatever you want You don t have to pay us 3 You may not pretend that you wrote this software If you use it in a program you must acknowledge somewhere in your documentation that you ve used the IJG code In legalese The authors make NO WARRANTY or representation either express or implied with respect to this software its quality accuracy merchantability or fitness for a particular purpose This software is provided AS IS and you its user assume the entire risk as to its quality and accuracy This software is copyright C 1991 1998 Thomas G Lane All Rights Reserved except as specified below Permission is hereby granted to use copy modify and distribute this software or portions thereof for any purpose without fee subject to these conditions 1 If any part of the sour
74. atted by other devices is not guaranteed with this camera unit e Format the memory card again in lt Setup gt gt lt Event gt gt lt Storage gt menu Cannot record in the NAS e Confirm that the information registered in the NAS is correct It reports that NAS setting has failed e Confirm that the IP address of the NAS is valid e Confirm that the ID password of the NAS is valid e Confirm that you can access the folder designated as the default folder using the ID of the NAS e Confirm that the NAS SMB CIFS items are unchecked e Confirm that the NAS IP address and the camera IP address are in the same format ex The NAS amp camera subnet mask initial value is 255 255 255 0 If the IP address is 192 168 20 32 then the NAS IP address should be in the range of 192 168 20 1 192 168 20 255 e Check whether you tried to access as another user without formatting the default folder saved or used e Confirm that you used recommended NAS equipment English _137 XIGNAddV OPEN SOURCE ANNOUNCEMENT GPL LGPL software license The software included in this product contains copyrighted software that is licensed under the GPL LGPL You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help cctv samsung com If you want to obtain the complete Corresponding Source code in the physical medium such as CD ROM the co
75. ay differ depending on the selected codec type e Default profile If no profile is selected when using the Web Viewer the default video profile is applied e E mail FTP profile Video profile to be transferred to the specified email or FTP site Only the MJPEG codec can be set as the E mail FTP profile e Record profile This is the profile that is applied to video recording e Audio In Sets whether to use audio for video recordings 6 According to your situation set ATC Auto Transmit Control mode e ATC mode It adjusts the video EE properties according to the variance ATC sensitivity very high in the network bandwidth controlling Es z Bie sy the bit rate Adjusting the bit rate depends on the ATC mode Control framerate Reduce the frame rate if the network bandwidth drops down Control compression Control the compression rate if the network bandwidth drops down Compression adjustment can cause deterioration of the image quality Event MD This function works when a Motion Detection MD event is selected If an event occurs the system controls the frame rate If no movement is detected the system outputs signals at the minimum frame rate thus reducing use of the bandwidth f lt Bitrate control gt is set to lt CBR gt the encoding priority according to the ATC mode will be fixed as below Bitrate ee ATC Control framerate Control compression Event MD 78_ setup screen e ATC sen
76. ayed check Bookmarks Setup in the Preference menu 6 When done click Apply TH 104_ setup screen EVENT SETUP FTP E mail You can configure the FTP E mail server settings so that you can transfer the images taken with camera to your PC if an event occurs 1 Click lt FTP E mail gt Select lt FTP configuration gt or From the Setup menu select the lt Event EX gt tab N3149S dN1 S lt E mail configuration gt and enter select a desired value e FTP configuration Server address To enter an IP address of the FTP server to transmit an event image ID Enter the user ID with which you will log in to the FTP server Password Enter the user account password for logging into the FTP server Upload directory To specify an FTP account path to transmit an event image Port The default port of the FTP server is 21 however you can use a different port number according to the FTP server settings Passive mode Select lt On gt if you need to connect in passive mode due to the firewall or the FTP server settings English _105 Setup screen e E mail configuration Server address To enter an SMTP address of the email server to transmit an event image Use authentication Select whether to use authorization Use SSL Specify the use of SSL ID Enter the user ID for logging into the email server Password Enter the user account password for loggi
77. c statement of acceptance of a version permanently authorizes you to choose that version for the Program Later license versions may give you additional or different permissions However no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version 15 Disclaimer of Warranty THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 16 Limitation of Liability IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MODIFIES AND OR CONVEYS THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER
78. can select a secure connection system or install the public certificate for this purpose 1 From the Setup menu select the lt Network EI gt tab 2 Click lt SSL gt 3 Select a secure connection system To access the camera using HTTPS mode you have to type the IP address for the camera in the form of https lt Camera_IP gt If you failed to configure the Web viewer settings in HTTPS mode with Internet Explorer edit the Internet options as follows lt Menu Tools gt Internet Options Advanced gt Security gt Uncheck TLS 1 0 and check TLS 1 1 TLS 1 2 gt 4 Search for the public certificate that you want to install on the camera To install the certificate on the camera you need to provide a certificate name it can be arbitrarily assigned by the user certificate file issued from the certification authority and a key file The lt HTTPS Secure connection mode using the public certificate gt item will be active only if there exists a public certificate installed 5 When done click Apply EZH Installing the certificate 1 Enter the certificate name 2 Click the Browse A button select the public certificate file and key file to be installed and then click the Install EZZ button Deleting the certificate 1 Click Delete EX button 2 To delete a public certificate you should access the network video decoder in the mode of lt HTTP Do not use secure c
79. ce code for this software is distributed then this README file must be included with this copyright and no warranty notice unaltered and any additions deletions or changes to the original files must be clearly indicated in accompanying documentation 2 If only executable code is distributed then the accompanying documentation must state that this software is based in part on the work of the Independent JPEG Group 3 Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences the authors accept NO LIABILITY for damages of any kind These conditions apply to any software derived from or based on the IJG code not just to the unmodified library If you use our work you ought to acknowledge us Permission is NOT granted for the use of any JG author s name or company name in advertising or publicity relating to this software or products derived from it This software may be referred to only as the Independent JPEG Group s software We specifically permit and encourage the use of this software as the basis of commercial products provided that all warranty or liability claims are assumed by the product vendor ansi2knr c is included in this distribution by permission of L Peter Deutsch sole proprietor of its copyright holder Aladdin Enterprises of Menlo Park CA ansi2knr c is NOT covered by the above copyright and conditions but instead by the usual dis
80. compiler used to produce the work or an object code interpreter used to run it The Corresponding Source for a work in object code form means all the source code needed to generate install and for an executable work run the object code and to modify the work including scripts to control those activities However it does not include the work s System Libraries or generalpurpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work For example Corresponding Source includes interface definition files associated with source files for the work and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require such as by intimate data communication or control flow between those subprograms and other parts of the work The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source The Corresponding Source for a work in source code form is that same work 2 Basic Permissions All rights granted under this License are granted for the term of copyright on the Program and are irrevocable provided the stated conditions are met This License explicitly affirms your unlimited permission to run the unmodified Program The output from running a covered work is covered by this License only if the output given its content c
81. create a shared folder C Restrict access to administrators only In this example the shared folder name Hide folders and files from users without permissions Encrypt this shared folder is testDirectory Encryption key Confirm key C Mount automatically on startup 6 In Windows for NAS access set Edit shared Folder testDirectory the privilege for the shared folder as E e follows ma _E Read oniy No access Check the admin s Read Write ae g m 7 Click on the lt User gt in the file sharing es and privilege menu or 112_ setup screen 8 After clicking the Create button enter Name testID name ID and password Description In this example name ID is set to ee testID and password is also set to ne testl D T Send a notification mail to the newly created user C Display user password in notification mail n According to the NAS recommendations P psetow he Bam te ce when you use Netgear s NAS equipment do not allocate the capacity for use 9 In Windows set the privilege for NAS access For the shared folder created in step 4 called testDirectory check Read Write N3149S dN1 S 10 Basic setting in the NAS is completed Connect your camera to the actual NAS IP address As shown below enter the NAS ID c
82. d is between 10th and 15th day of the month and more than 800 events were recorded 10th through 11th your search will be limited up to 11th day with a total of 800 events and events after then from 12th will not be found 5 Select a data item to play in the search list 6 Click the Play JJ button 7 To stop playing the video click Stop R 8 To return to the search screen oe click Exit KJ English _71 H2M3IA GAM web viewer Name of time search screen and its function E 0 00 No Item Time bar Search date setting Speaker Screen optimization Fix the resolution Capture Full screen Ne Ae IS 72_ web viewer Description The section in the specific period is played by moving the time bar Set the search date using the calendar m f there is data saved in your Micro SD memory card or NAS on the day it is marked as a box on the calendar To listen to a voice signal if present in the recorded video then activate the voice signal icon when you play it The camera image is converted to fit the Web browser window Regardless of the resolution setup configured in the camera it sets the resolution to 800x600 Press it again to switch back to the default resolution The current image is saved as a jpg image file The current image is converted to cover the maximum size of the monitor
83. e meaning of section 10 If the Program as you received it or any part of it contains a notice stating that it is governed by this License along with a term that is a further restriction you may remove that term If a license document contains a further restriction but permits relicensing or conveying under this License you may add to a covered work material governed by the terms of that license document provided that the further restriction does not survive such relicensing or conveying If you add terms to a covered work in accord with this section you must place in the relevant source files a statement of the additional terms that apply to those files or a notice indicating where to find the applicable terms Additional terms permissive or non permissive may be stated in the form of a separately written license or stated as exceptions the above requirements apply either way 8 Termination You may not propagate or modify a covered work except as expressly provided under this License Any attempt otherwise to propagate or modify it is void and will automatically terminate your rights under this License including any patent licenses granted under the third paragraph of section 11 However if you cease all violation of this License then your license from a particular copyright holder is reinstated a provisionally unless and until the copyright holder explicitly and finally terminates your license and b permanently if
84. e name of Cambridge Broadband Ltd may not be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS NTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING N ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Part 4 Sun Microsystems Inc copyright notice BSD Copyright c 2003 Sun Microsystems Inc 4150 Network Circle Santa Clara California 95054 U S A All rights reserved Use is subject to license terms below This distribution may include materials developed by third parties Sun Sun Microsystems the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems Inc in the U S and other countries Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met yy
85. e right log list select an item to search for e f you select lt All gt in the top left dropdown list all logs for the applicable log type will be displayed 5 If one page can not display all the logs available use the bottom buttons to move to the previous next or the last item 6 Click on the lt Backup gt button to save all the log data for the currently selected mode system event in the time stamp value create by camera in modelname mode camera txt file in the download folder for the browser 14 m f you want to view the details of a log click Info E in the right column of the log the log information will be shown in the bottom pane Each page displays 15 logs with the latest one displayed at the top The event system log list can contain up to 1000 logs after that the existing logs will be deleted from the oldest one each time a new log is created English _125 Setup screen VIEWING PROFILE INFORMATION Profile access You can check the profile information 1 Click Status EF on the live screen NET CAMERA WESVIEWER 2 The profile information screen is displayed e Profile access Show the information of the newly added profile E monitoring 8 Playback 0 setup ADMIN Hi Status Profile Show the information of the newly added codec Bitrate kbps Show both the actual bit rate and the set bit rate Framerate fos Show both the actual frame rate and
86. e security and any other problems caused by mismanaging a password Overview IMPORTANT SAFETY INSTRUCTIONS N O 0 SS hos 10 11 12 13 14 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water MAIAYSAO Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lighting storms
87. e the overall brightness 1 Select lt SSDR gt 2 Set lt Mode gt to lt On gt 3 Configure the lt Level gt and lt D Range gt settings as necessary e Level Adjust the level of the dynamic range e D Range Select the amplitude area of the dynamic range 90_ setup screen To Set White Balance You can correct the image colors based on white under any lighting conditions 1 Select lt White balance gt 2 Select lt Mode gt e ATW Corrects the colors of the camera video automatically e Manual You can adjust the red and blue gains of the camera video manually e AWC Corrects the colors of the camera video to be optimized to the current lighting condition and screen mode To obtain the optimal condition for the current lighting put the focus of the camera to a white paper and press the Set button If the lighting environment is changed you should readjust the settings accordingly e Outdoor Automatically corrects the video colors of the camera to be optimized to the outdoor environment e Indoor Automatically corrects the video colors of the camera to be optimized to the indoor environment N3149S dNLAS 14 In AWC mode click the Set button if you want to keep the white balance level of the current image i The white balancing may not work properly in the following conditions If this is the case switch to AWC mode If the surrounding condition of the object is out of the tempera
88. e to Network DDNS and configure the DDNS settings Move to Basic IP amp Port and set the IP type to DHCP Connect the camera which was removed from your PC directly to the modem CO NO OO BR Restart the camera 14 For configuring the DDNS settings refer to DDNS page 96 For registering the DDNS settings refer to Registering with DDNS page 97 Refer to IP amp Port for how to setup IP page 85 50_ network connection and setup CONNECTING THE CAMERA DIRECTLY TO A PPPoE MODEM 1 Connect the user PC directly with the network camera N O O Aa Q Run the IP Installer and change the IP address of the camera so that you can use Camera External Remote PC dN13S ANY NOILOANNOO MYOMLAN the web browser on your desktop to connect to the Internet Use the Internet browser to connect to the web viewer Move to Setup page Move to Network DDNS and configure the DDNS settings Move to Basic IP amp Port Setup Page set the IP type to PPPoE and enter the network service s ID and password 7 Connect the camera which was removed from your PC directly to the modem 8 Restart the camera 14 For configuring the DDNS settings refer to DDNS page 96 For registering the DDNS settings refer to Registering with DDNS page 97 Refer to IP amp Port for how to setup I
89. ea 5 To delete an area right click on the screen to open popup context menu and select Delete and OK button 6 When done click Apply HEE 120_ setup screen Only scheduled time Iways Clear Minutes M Hour SYSTEM SETUP Product information 1 From the Setup menu select the lt System EJ gt tab 2 Click lt Product information gt 3 Check the camera information or provide details according to your network environment N3149S dN1 S Model Model name of the product Serial number Product serial number Device name Provide a device name that will be displayed on the Live screen Location Specify the location where the camera is installed Description Provide detailed information about the camera location Memo Provide an explanation about the camera for better understanding Language Select a preferred language for the Web Viewer OSD 14 The default language is set to lt English gt 4 When done click Apply English _121 Setup screen Upgrade Reboot 1 From the Setup menu select the lt System ESA gt tab 2 Click lt Upgrade Reboot gt 3 Select a desired item and set it appropriately e Upgrade Performs upgrading the system e Factory default Resets the system to the factory default Except network parameter To initialize all settings except those related with the network and lens All Resets all
90. ecipient automatically receives a license from the original licensors to run modify and propagate that work subject to this License You are not responsible for enforcing compliance by third parties with this License An entity transaction is a transaction transferring control of an organization or substantially all assets of one or subdividing an organization or merging organizations If propagation of a covered work results from an entity transaction each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party s predecessor in interest had or could give under the previous paragraph plus a right to possession of the Corresponding Source of the work from the predecessor in interest if the predecessor has it or can get it with reasonable efforts You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License For example you may not impose a license fee royalty or other charge for exercise of rights granted under this License and you may not initiate litigation including a cross claim or counterclaim in a lawsuit alleging that any patent claim is infringed by making using selling offering for sale or importing the Program or any portion of it 11 Patents A contributor is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based The work thus licensed
91. ed that the Japanese text shall govern the interpretation and performance of this License Agreement URL http Awww apache org licenses LICENSE 2 0 Object form shall mean any form resulting from mechanical transformation or translation of a Source form including but not limited to compiled object code generated documentation and conversions to other media types Work shall mean the work of authorship whether in Source or Object form made available under the License as indicated by a copyright notice that is included in or attached to the work an example is provided in the Appendix below Derivative Works shall mean any work whether in Source or Object form that is based on or derived from the Work and for which the editorial revisions annotations elaborations or other modifications represent as a whole an original work of authorship For the purposes of this License Derivative Works shall not include works that remain separable from or merely link or bind by name to the interfaces of the Work and Derivative Works thereof Contribution shall mean any work of authorship including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner For the purposes of this definition
92. eding Network Cable Specification tem Remark Connector Ethernet 10 100 Mbps Cable Max Distance PoE Support 46_ installation amp connection Connecting to Audio Input hy Microphone Microphone lt SNO L5083R gt English _47 NOILOANNODO 8 NOILVTIVLISNI Installation amp connection Microphone Amp Microphone lt SNV L5083R gt 1 Connect the MIC port of the camera with the microphone or LINE OUT port of the amplifier that the microphone is connected to 14 As a microphone is built in you can use the built in microphone instead of an external one It is applicable only to the SND L5013 SND L5083R model 2 Check the specifications for audio input e Audio Codec Audio In G 711 PCM Bit Rate 64kbps Sampling Frequency 8kHz G 726 ADPCM Bit Rate 16Kbps 24Kbps 32Kbps 40Kbps Sampling Frequency 8kH2 e Audio in Mono signal line input Max 2 4 Vpp e Line out impedance 6000 48 _ installation amp connection network connection and setup You can set up the network settings according to your network configurations CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN 1 Launch an Internet browser on the local PC 2 Enter the IP address of the camera in the address bar of the brow
93. effective visibility of 20m at O Lux HD Video Quality Multi Streaming This network camera can display videos in different resolutions and qualities simultaneously using different CODECs Web Browser based Monitoring Using the Internet web browser to display the image in a local network environment MAIAYSAO Alarm When an event occurs video is either sent to the email address registered by the user sent to the FTP server saved in a Micro SD card or NAS Tampering Detection Detects tempering attempts on video monitoring Motion Detection Detects motion from the camera s video input ONVIF Compliance This product supports ONVIF Profile S amp G QO B VI F For more information refer to www onvif org Driving network video through global standardization English _9 Overview RECOMMENDED PC SPECIFICATIONS CPU Intel Core 2 Duo 2 4 GHz or higher Web Plug in is optimized to SSE 4 1 Instruction Set e Resolution 1280X1024 pixels or higher 32 bit color e RAM 2GB or higher e Supported OS Windows XP VISTA 7 8 8 1 MAC OS X 10 7 10 10 e Supported Browser Microsoft Internet Explorer Ver 8 11 Mozilla Firefox Ver 9 35 Google Chrome Ver 15 40 Apple Safari Ver 8 0 2 Mac OS X 10 10 7 0 6 Mac OS X 10 9 6 0 2 Mac OS X 10 8 10 7 only 5 1 7 X Mac OS X only Windows 8 is supported only in the Desktop mode Neither a beta test version unlike the version released in the company web
94. emented by one YYYYMMDD_HHMMSS indicates the start time of data saving 001_YYYYMMDD_HHMMSS smi file is a caption file and you can view it if it exists in the same directory as its related AVI file The max recording time per AVI file is 30 minutes If you change or damage the saved data on your own it will not play back or save properly 76_ web viewer 405 786 KB Setup screen SETUP On the network you can set up basic information on the camera video and audio network events and system 1 In the Live screen click Setup RRA 2 The Setup screen appears m The setting page for preview video requires the STW web viewer plug in to be installed on the PC If it is not intalled properly the installation page automatically apprears BASIC SETUP Video profile 1 From the Setup menu select the lt Basic gt tab 2 Click lt Video profile gt 3 Set the lt Video profile connection policy gt e Keep connection when profile setting is changed Output uses the same settings even when the settings of the active profile are changed If not selected changing a profile used by an existing connection resets such connection English _77 N3149S dN1 S Setup screen 4 Select each profile properties For more details refer to To Add Change the Video Profile Page 80 5 Click the input box of each item and enter select a desired value The context menu m
95. en you modify the work You may place additional permissions on material added by you to a covered work for which you have or can give appropriate copyright permission Notwithstanding any other provision of this License for material you add to a covered work you may if authorized by the copyright holders of that material supplement the terms of this License with terms a Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License or b Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it or c Prohibiting misrepresentation of the origin of that material or requiring that modified versions of such material be marked in reasonable ways as different from the original version or d Limiting the use for publicity purposes of names of licensors or authors of the material or e Declining to grant rights under trademark law for use of some trade names trademarks or service marks or f Requiring indemnification of licensors and authors of that material by anyone who conveys the material or modified versions of it with contractual assumptions of liability to the recipient for any liability that these contractual assumptions directly impose on those licensors and authors All other non permissive additional terms are considered further restrictions within th
96. enish Portuguese Czech Polish Turkish Rumanian Serbian Dutch Croatian Hungarian Greek Norway Finland Supported OS Windows XP VISTA 7 78 7 8 1 MAC OS X 10 7 10 10 Supported Browser Microsoft Internet Explorer Ver 8 11 Mozilla Firefox Ver 9 35 Google Chrome Ver 15 40 Apple Safari Ver 8 0 2 Mac OS X 10 10 7 0 6 Mac OS X 10 9 6 0 2 Mac OS X 10 8 10 7 only 5 1 7 X Mac OS X only Web Viewer Central Management Software smartViewer 130_ appendix Description Items SND L5013 SND L5083R SNO L5083R SNV L5083R 30 C 55 C 22 F Operating Temperature 10 C 55 C 14 F 131 F Less than 90 RH e Humidity 131 F Less than 90 RH Start up should be done at above gt 20 C 2 Environmental o Storage Temperature 3006 460 C 22 F 140 F Less than 90 RH x Humidity Ingress Protection IP66 Vandal Resistance IK10 Input Voltage Current PoE IEEE802 3af Class2 Electrical Power Consumption Max 2 4W Max 5 4W Max 5 9W Max 5 8W Color Material Ivory Plastic Dark y Ivory Metal Metal Mechanical 0110 mm x H86 0119 8 mm x eas en 0137 mm x Dimension X H mm excluding mm H98 8 mm i H106 1 mm Sun shield Weight 2409 290g 700g 670g English _131 appendix PRODUCT OVERVIEW SND L5013 Unit mm inch 110 4 334 86 3 386 132_ appendix SND L508
97. equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Samsung Techwin cares for the environment at all product manufacturing stages and is C p taking measures to provide customers with more environmentally friendly products eco The Eco mark represents Samsung Techwin s devotion to creating environmentally friendly RoHS compliant products and indicates that the product satisfies the EU RoHS Directive Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their
98. er and the case 2 Pull out the rubber plug on the bottom as shown in the figure 3 Insert the waterproof audio cable into the hole that was made by removing the rubber plug in step 2 above and connect it to the connector NOILOANNODO 8 NOILLVTIVLSNI 4 Insert the rubber stopper of the waterproof audio cable into a hole 5 Adjust the lens in a desired direction by referring to the Adjusting the monitoring direction for the camera section page 39 6 Attach the dome cover English _35 Installation amp connection Attaching to the unbundled adapter Choose and purchase a necessary one of the following options unbundled that is suitable to the installation site or for your convenience 1 Use the provided machine screw to fix the camera Connect and arrange the necessary cables lest that Install the camera body in the reverse order of Adjust the lens in a desired direction by referring to the Remove the dome cover from the case by referring to the Disassembling section page 33 case to the unbundled adapter they should be damaged or twisted while installing the camera Disassembling Adjusting the monitoring direction for the camera section page 39 Close the dome cover To ensure waterproofing tight up the fixing bolts using the L wrench Outdoor installation When you install it outside of the building please waterproof it with waterpr
99. er fixed OSD item To Set IR 1 Select lt IR gt 2 Select each item and set it properly e Mode When the IR indicator turns on in B W mode the screen will be protected from saturation on the center area so that you can identify a short distant object Off IR mode will be disabled Auto Adjust the IR brightness according to the brightness of the object on the center screen Mode 14 SND L5013 is not supported English _95 SetUD Screen NETWORK SETUP DDNS DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a camera into a general Host Name so that the user can easily remember it K Youcan use the DDNS service only if the internet is connected 1 From the Setup menu select the lt Network EI gt tab 2 Click lt DDNS gt 3 Select the lt DDNS gt connection type 4 Type in the DDNS items according to the selected type e Samsung DDNS Select this if you use the DDNS server provided by Samsung Techwin Product ID Enter the product ID that is registered with the Samsung DDNS service Quick connect It sets port forwarding automatically when used with a UPnP Universal Plug and Play supporting router 4 m f you want to use the DDNS service without using a hub that supports the UPnP function click Quick connect then go to the hub menu and activate port forwarding for your hub For more on how to set port forwarding for your hub refer
100. er to where the full notice is found one line to give the program s name and an idea of what it does Copyright C yyyy name of author This program is free software you can redistribute it and or modify it under the terms of the GNU General Public License as published by the Free Software Foundation either version 2 of the License or at your option any later version This program is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License for more details You should have received a copy of the GNU General Public License along with this program if not write to the Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Also add information on how to contact you by electronic and paper mail If the program is interactive make it output a short notice like this when it starts in an interactive mode Gnomovision version 69 Copyright C year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY for details type show w This is free software and you are welcome to redistribute it under certain conditions type show c for details The hypothetical commands show w and show c should show the appropriate parts of the General Public License Of course the commands you use may be called something other than show w
101. eras Indoor Buried Housing 14_ overview Model Name SNV L5083R SNV L5083R SNV L5083R SND L5083R SNV L5083R AT A GLANCE SND L5013 Appearance MAIAYSAO Item Description 1 Dome cover Case cover used to protect the lens and the main unit 2 Camera Case Housing part that covers the camera body English _15 overview 16_ overview Nie Item Internal Cover Lens Reset Button Micro SD Memory Card Compartment PoE Connector Description It is a cover to protect the main body Lens for the camera The button restores all camera settings to the factory default Press and hold for about 5 seconds to reboot the system E If you reset the camera the network settings will be adjusted so that DHCP can be enabled If there is no DHCP server in the network you must run the IP Installer program to change the basic network settings such as IP address Subnet mask Gateway etc before you can connect to the network Compartment for the Micro SD memory card Connects to the network and supplies power through Ethernet cable English _17 MAIAYSAO overview AT A GLANCE SND L5083R Appearance Item Description 1 Dome cover Case cover used to protect the lens and the main unit 2 Camera Case Housing part that covers the camera body 18_ overview M LS English _19 overview Item Interna
102. es the schedule for color mode operation a If itis set the Color mode is maintained from 00 second of the starting time to 59 second of the ending time m m f you switch the day night mode the motion detection event cannot be detected English _93 Setup screen To Setup Special 1 Select lt Special gt 2 Select each item and set it properly Sharpness Adjust the overall sharpness of the image If selecting lt On gt you can adjust the sharpness of the image Sharpness level The higher the level is the sharper and clearer the outline of the image becomes Gamma Adjust the contrast of the image Color level Adjust the strength of video color LDC To determine whether or not to use the image distortion correction LDC Level To adjust the level of the distortion correction factor 94 setup screen To Set OSD 1 Select lt OSD gt 2 Select each item and set it properly e Camera title It specifies the name of the camera to be displayed on the screen e Camera title X Y It specifies the position of the camera name on the screen e Date amp time Set the time display and date formats on the screen e Date amp Time X Y Specify the position of time display on the screen e Weekday overlay Specify the use of date display date on the screen N3149S dNLAS o Aposition adjustable item Camera title Date amp Time may not be displayed normally if it overlaps with anoth
103. exit the full screen mode press Esc on the keyboard 14 For the Internet Explorer and Google Chrome browser you can switch to the full screen To Use Audio 1 Click Audio EJ icon to activate audio communication 2 Use KB bar to control the volume 14 m f there is no sound from pulling in and out the audio jack while it is in operation click the Audio E icon to enable it again English _69 web viewer PLAYING THE RECORDED VIDEO 14 Before you can play the video you must configure the record settings For details on record settings refer to Storage page 107 Name of event search screen and its function JN lt Item Description Set the search date and time range for data saved in your Micro SD memory 1 Search range setting card or NAS 2 Search event setting Set the event type to search within the search period 3 Event search Run the event search 70_ web viewer To play the content after searching by event 1 Click the Playback a button 2 Specify the start time and end time of your search 3 Select an event type for your search within the specified period 4 Click the Event search button The search results will be displayed in the list 14 f more than 800 events are recorded within the search period your search will be limited up to the date when the 800th event is recorded For instance if the search perio
104. f gasket is tightly attached to the cable to make it waterproof i You must fully assemble it to rotate the back cover up to the end of the screw thread of the RJ45 connector 30_ installation amp connection RJ45 connector protection cover Outdoor installation When you install it outside of the building please waterproof it with waterproof butyl rubber tape can be purchased in stores so that water does not leak from the gap of the cable connected to the outside 1 Connect the cable ze 2 Wrap the black cable jacket Area A and 5 the cable connection area with waterproof MTT butyl rubber tape so that more than half of TT the butyl rubber tape is overlapped LLL A A gt m m f the cable jacket is not waterproofed properly Sanii then it can directly cause leakage Make sure to protect the cable with a dense layer of taping NOILOANNODO 8 NOILVTIVLISNI Waterproof butyl tape is made of butyl rubber that can be stretched to twice its normal length English _31 Installation amp connection To adjust the zoom factor or focus 1 Loosen the front cover as shown 2 Loosen the zoom focus lever slightly 3 Position the zoom focus lever to WIDE NEAR or TELE FAR as appropriate 4 Then tighten the zoom focus lever to fix the adjusted position 5 Turn the front cover to tighten it Front cover Zoom Lever
105. he particular user actually uses or expects or is expected to use the product A product is aconsumer product regardless of whether the product has substantial commercial industrial or non consumer uses unless such uses represent the only significant mode of use of the product Installation Information for a User Product means any methods procedures authorization keys or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made If you convey an object code work under this section in or with or specifically for use in a User Product and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term regardless of how the transaction is characterized the Corresponding Source conveyed under this section must be accompanied by the Installation Information But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product for example the work has been installed in ROM The requirement to provide Installation Information does not include a requirement to continue t
106. hts Brooklands Weybridge Toll Free 1 877 213 1222 Direct 1 201 325 6920 Surrey KT13 ONY UK Fax 1 201 373 0124 Tel 44 1932 82 6700 Fax 44 1932 82 6701 www samsung security com www samsungsecurity co uk www samsungtechwin com www samsungsecurity com www samsungipolis com
107. icense a under intellectual property rights other than patent or trademark Licensable by Contributor to use reproduce modify display perform sublicense and distribute the Modifications created by such Contributor or portions thereof either on an unmodified basis with other Modifications as Covered Code and or as part of a Larger Work and b under Patent Claims infringed by the making using or selling of Modifications made by that Contributor either alone and or in combination with its Contributor Version or portions of such combination to make use sell offer for sale have made and or otherwise dispose of 1 Modifications made by that Contributor or portions thereof and 2 the combination of Modifications made by that Contributor with its Contributor Version or portions of such combination c the licenses granted in Sections 2 2 a and 2 2 b are effective on the date Contributor first makes Commercial Use of the Covered Code d Notwithstanding Section 2 2 b above no patent license is granted 1 for any code that Contributor has deleted from the Contributor Version 2 separate from the Contributor Version 3 for infringements caused by i third party modifications of Contributor Version or ii the combination of Modifications made by that Contributor with other software except as part of the Contributor Version or other devices or 4 under Patent Claims infringed by Covered Code in the absence of
108. ification are permitted provided that the following conditions are met yy Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer yy Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution yy Neither the name of Sparta Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Part 6 Cisco BUPTNIC copyright notice BSD Copyright c 2004 Cisco Inc and Information Network Center of Be
109. iginal Code prior Modifications used by a Contributor and the Modifications made by that particular Contributor 1 3 Covered Code means the Original Code or Modifications or the combination of the Original Code and Modifications in each case including portions thereof 1 4 Electronic Distribution Mechanism means a mechanism generally accepted in the software development community for the electronic transfer of data 1 5 Executable means Covered Code in any form other than Source Code 1 6 Initial Developer means the individual or entity identified as the Initial Developer in the Source Code notice required by Exhibit A 1 7 Larger Work means a work which combines Covered Code or portions thereof with code not governed by the terms of this License 1 8 License means this document 1 8 1 Licensable means having the right to grant to the maximum extent possible whether at the time of the initial grant or subsequently acquired any and all of the rights conveyed herein 1 9 Modifications means any addition to or deletion from the substance or structure of either the Original Code or any previous Modifications When Covered Code is released as a series of files a Modification is A Any addition to or deletion from the contents of a file containing Original Code or previous Modifications B Any new file that contains any part of the Original Code or previous Modifications 1 10 Original Code mean
110. ijing University of Posts and Telecommunications All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met yy Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer yy Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution yy Neither the name of Cisco Inc Beijing University of Posts and Telecommunications nor the names of their contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY
111. in one of these ways a Convey the object code in or embodied in a physical product including a physical distribution medium accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange b Convey the object code in or embodied in a physical product including a physical distribution medium accompanied by a written offer valid for at least three years and valid for as long as you offer spare parts or customer support for that product model to give anyone who possesses the object code either 1 a copy of the Corresponding Source for all the software in the product that is covered by this License ona durable physical medium customarily used for software interchange for a price no more than your reasonable cost of physically performing this conveying of source or 2 access to copy the Corresponding Source from a network server at no charge c Convey individual copies of the object code with a copy of the written offer to provide the corresponding Source This alternative is allowed only occasionally and noncommercially and only if you received the object code with such an offer in accord with subsection 6b d Convey the object code by offering access from a designated place gratis or for a charge and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge You need not require recipients to copy the Correspo
112. indows operating system click the camera name searched from the network menu The login window is displayed Connecting via Bonjour H2M3IA GAM 1 Run the client or operating system in support of the Bonjour protocol 2 Click the camera name for search In the Mac operating system click the camera name searched from the Bonjour tab of Safari The login window is displayed To check the DDNS address If the camera is connected directly to the DHCP cable modem DSL modem or PPPoE modem the IP address of your network will be changed each time you try to connect to the ISP Internet Service Provider server If this is the case you will not be informed of the IP address changed by DDNS Once you register a dynamic IP based device with the DDNS server you can easily check the changed IP when you try to access the device To register your device to the lt DDNS gt server visit www samsungipolis com and register your device first and then set the Web Viewer s lt Network gt lt DDNS gt to lt Samsung DDNS as well as providing lt Product ID gt that had been used for DDNS registration English _63 web viewer PASSWORD SETTING When you access the product for the first time you must register the login password When the Password change window appears payee aris Confirm new password enter the new password If the password is 8 to 9 letters long then it should be a combination of at leas
113. ine Forum and the copyright holder of the Source Code be liable for any dispute which may arise between the Source Code User and a third party in connection with the third party s industrial property rights Apache License 2 0 Component Name License mDNSResponder_bonjour Apache License 2 0 TERMS AND CONDITIONS FOR USE REPRODUCTION AND DISTRIBUTION 1 Definitions License shall mean the terms and conditions for use reproduction and distribution as defined by Sections 1 through 9 of this document Licensor shall mean the copyright owner or entity authorized by the copyright owner that is granting the License Legal Entity shall mean the union of the acting entity and all other entities that control are controlled by or are under common control with that entity For the purposes of this definition control means i the power direct or indirect to cause the direction or management of such entity whether by contract or otherwise or ii ownership of fifty percent 50 or more of the outstanding shares or iii beneficial ownership of such entity You or Your shall mean an individual or Legal Entity exercising permissions granted by this License Source form shall mean the preferred form for making modifications including but not limited to software source code documentation source and configuration files Article 9 Indemnity 1 Neither T Engine Forum nor the copyright holder of the Source Code
114. ipients to know that what they have is not the original so that any problems introduced by others will not reflect on the original authors reputations Finally any free program is threatened constantly by software patents We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses in effect making the program proprietary To prevent this we have made it clear that any patent must be licensed for everyone s free use or not licensed at all The precise terms and conditions for copying distribution and modification follow TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION Version 2 June 1991 Copyright C 1989 1991 Free Software Foundation Inc 51 Franklin S 0 This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License The Program below refers to any such program or work and a work based on the Program means either the Program or any derivative work under copyright law that is to say a work containing the Program or a portion of it either verbatim or with modifications and or translated into another language Hereinafter translation is included without limitation in the term modification Each licensee is addressed as you Activities other than copying distribution and modification are not covered by this Lice
115. is called the contributor s contributor version A contributor s essential patent claims are all patent claims owned or controlled by the contributor whether already acquired or hereafter acquired that would be infringed by some manner permitted by this License of making using or selling its contributor version but do not include claims that would be infringed only as a consequence of further modification of the contributor version For purposes of this definition control includes the right to grant patent sublicenses in a manner consistent with the requirements of this License Each contributor grants you a non exclusive worldwide royaltyfree patent license under the contributor s essential patent claims to make use sell offer for sale import and otherwise run modify and propagate the contents of its contributor version In the following three paragraphs a patent license is any express agreement or commitment however denominated not to enforce a patent such as an express permission to practice a patent or covenant not to sue for patent infringement To grant such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party If you convey a covered work knowingly relying on a patent license and the Corresponding Source of the work is not available for anyone to copy free of charge and under the terms of this License through a public
116. ising rights under this License with respect to the covered work and you disclaim any intention to limit operation or modification of the work as a means of enforcing against the work s users your or third parties legal rights to forbid circumvention of technological measures 4 Conveying Verbatim Copies You may convey verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice keep intact all notices stating that this License and any non permissive terms added in accord with section 7 apply to the code keep intact all notices of the absence of any warranty and give all recipients a copy of this License along with the Program You may charge any price or no price for each copy that you convey and you may offer support or warranty protection for a fee 5 Conveying Modified Source Versions You may convey a work based on the Program or the modifications to produce it from the Program in the form of source code under the terms of section 4 provided that you also meet all of these conditions a The work must carry prominent notices stating that you modified it and giving a relevant date b The work must carry prominent notices stating that it is released under this License and any conditions added under section 7 This requirement modifies the requirement in section 4 to keep intact all notices
117. ission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Various copyrights apply to this package listed in various separate parts below Please make sure that you read all the parts Part 1 CMU UCD copyright notice BSD like Copyright 1989 1991 1992 by Carnegie Mellon University Derivative Work 1996 1998 2000 Copyright 1996 1998 2000 The Regents of the University of California All Rights Reserved Permission to use copy modify and distribute this software and its documentation for any purpose and without fee is hereby granted provided that the above copyright notice appears in all copies and that both that copyright notice and this permission notice appear in supporting documentation and that the name of CMU and The Regent
118. itch back to the default resolution Full Screen Switch the current video to the maximum size of the monitor Capture Saves the snapshot as an image file in the jpg format Manual recording Users can store videos to a PC by themselves Audio control Hide the context menu S SS S O N 68_ web viewer To activate audio and control its volume The left corner context menu will disappear but only the menu icon To capture the snapshot 1 Click Capture ESA on the scene to capture 2 When a captured video is saved a notification message appears When using Internet Explorer the captured video is saved in My Computer My Documents Pictures In Mac OS it is saved in Pictures or Users user account Pictures 14 m f you encounter an interrupted video when capturing the image with IE8 on a Windows 7 based PC deselect Turn On Protected Mode from Tools Internet Options Security H2M3IA GAM f the screen is not captured by IE browser in Windows 7 or 8 run the IE Browser with the Admin privilege How to record videos manually 1 Press Manual recording fei 2 To end the recording press Manual recording KE again 14 Can store manually recorded videos to the user s PC in avi file format Specify a path and store your videos To fit the full screen 1 Click the Full Screen EE button 2 This will fit the Viewer to the full screen 3 To
119. ks These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Program or any work based on the Program you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Program or works based on it 6 Each time you redistribute the Program or any work based on the Program the recipient automatically receives a license from the original licensor to copy distribute or modify the Program subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties to this License 7 If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Program at all For example if a patent license would not permit royaltyfree redistribution of the Program by all those who receive copies directly or indirectly through you then the only way you could satisfy both it
120. kup settings 1 To restore the backup settings click Restore 2 Select a backup file and click Open 14 If you perform the backup or restoration the web browser will be closed and the camera will reboots m f you try to recover the config file backed up in other model some functions may B Save As gO gt Libraries Pictures r janize New folder Pictures library a Includes 1 locatio Ji Sample Pictures gt amp HP_PAVILION C gt ea HP_RECOVERY D File name Save as type Configuration Backup File bin 2 Hide Folders Open gO b Libraries p Pictures Organize New folder s m Pictures library Includes 1 locations 45 Favorites HEI Desktop Download m Saaria Ji Sample Picturestion E Recent Places Backup bin gt amp HP_PAVILION C gt cq HP_RECOVERY E gt ee data E D PKBACK 001 L File name malfunction and you need to change the setting manually 124 setup screen Arrange by Folder Log You can check the system log or event log 1 From the Setup menu select the lt System ESA gt tab 2 Click lt Log gt 3 Select a log type e System You can check the system logs where any system changes are recorded including the time information e Event You can check the event logs including the time information n m C U 22 O J m m 4 From th
121. l Cover Illumination Sensor IR LED 0 N j Lens Zoom control lever g Focus control lever PoE Connector Micro SD Memory Card Compartment N Reset Button 20_ overview Description It is a cover to protect the main body Detects incoming light to control the IR LED These infrared LED s are controlled by the illumination sensor Lens for the camera Zoom in Tele Zoom out Wide By rotating it to the right or the left the lens zoom can be adjusted By rotating it clockwise the zoom can be fixed Focusing on a near object Near Focusing on a far object Far By rotating it to the right or the left the focus can be controlled By rotating it clockwise the focus can be fixed Connects to the network and supplies power through Ethernet cable Compartment for the Micro SD memory card The button restores all camera settings to the factory default Press and hold for about 5 seconds to reboot the system E If you reset the camera the network settings will be adjusted so that DHCP can be enabled If there is no DHCP server in the network you must run the IP Installer program to change the basic network settings such as IP address Subnet mask Gateway etc before you can connect to the network AT A GLANCE SNO L5083R Appearance MAIAYSAO mess N amp lt F English _21 overview Item Description The button rest
122. license granted under Article 4 1 above the System Developer may perform the following acts 1 to perform any and all acts set forth in the Article 4 3 above 2 to develop and manufacture the Embedded Product containing the Binary Code and whether with or without payment provide the End User with the same and make the Binary Code available to the End User on the Embedded Product 5 The Source Code User and the System Developer shall be obligated to give a notice that the Source Code is used in such a way as separately specified by T Engine Forum when they use the Source Code or the Binary Code or make the Binary Code available for the End User on the Embedded Product Article 5 Distribution of Modified Source Code 1 Any of A members of T Engine Forum may become the Distributor of Modification by obtaining the approval of T Engine Forum through the registration procedure as prescribed by the Forum provided that only the department of the A member which has taken the registration procedure may distribute the Modified Source Code in such a way as provided for in this Article as long as it holds the Amembership 2 The Distributor of Modification may create the Modified Source Code based on the Source Code provided by T Engine Forum and the Patch for Modification to be applied to create such Modified Source Code from the Source Code 3 The Distributor of Modification shall prior to the distribution inform T Engine F
123. limit of the shortest exposure time e Anti flicker It prevents screen flickering incurring from the dissonance between the surrounding lighting and the frequency e SSNR Select Able or Disable for the video noise elimination function e SSNR level Adjust the noise reduction level e AGC Select AGC Control mode Adjust the gain value of the video that in particular was recorded at a low contrast scene and had a lower brightness level than normal to control the video brightness i The image exposure can be saturated depending on the Shutter setup range 92_ setup screen To Set Day Night 1 Select lt Day Night gt Day Night 2 Select each item and set it properly e e Mode Mode is used to adjust the Re color of Color or Black and White a Start time e Color The video is always output in rex m color ane BW The video is always output in se 2 black and white ai M z Auto Normally it is set to Color but to B amp W under low luminance at night f AGC of the lt Exposure gt menu is set to lt Off gt the day night mode cannot be set to lt Auto gt Schedule Set the time during which the camera is operated in the color mode e Dwell Time It specifies the period for which the selected brightness condition must be maintained to switch the lighting mode from Day to Night or vice versa e Duration It specifies the interval of lighting mode conversion e Activation time Color It specifi
124. lish _33 NOILOANNODO 8 NOLLVTIVLSNI Installation amp connection Installation 1 Drill a hole 3mm diameter and minimum depth of 10 mm for an installation screw using the template provided 2 Align the installation hole of the camera to the previously drilled hole and then insert a screw and tighten 3 Connect and arrange the necessary cables lest that they should be damaged or twisted while installing the camera 4 Adjust the lens in a desired direction by referring to the Adjusting the monitoring direction for the camera section page 39 5 Close the dome cover To ensure waterproofing tight up the fixing bolts using the L wrench Connecting LAN cable 1 Remove the dome cover and the case 2 Pull out the long projected part of the rubber plug on the t bottom and remove it as shown in the figure ay Use an appropriate cable bush for the LAN cable to be connected Basic camera Use the cable with a diameter of 05 6 5 Components provided Use the cable with a diameter of Q7 8 5 3 Insert the LAN cable into hole made by removing the projected part of the rubber plug in step 2 above 4 Remove the sheath with a cable cutter and align the cables 5 Connect the LAN cable with a LAN connector and insert it into the LAN tool 6 Connect the finished cable to the Ethernet port 34_ installation amp connection Connecting waterproof audio cable 1 Remove the dome cov
125. lt name is lt public gt Write community Provide the name of the write community where you can access to the SNMP information The default name is lt write gt 102_ setup screen e Enable SNMP Trap SNMP trap is used to send important events and conditions to the Admin Community Enter the trap community name to receive messages IP address Enter the IP address to which messages will be sent Authentication failure It specifies whether an event shall be generated when the community information is invalid Network connection It specifies whether an event shall be generated when the network disconnection is restored e Enable SNMP v3 SNMP version 3 will be active Password Specify the default password for SNMP version 3 The default password is lt admin4321 gt The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product Note that the security and other related issues caused by the unchanged password shall be responsible for the user Password should be longer than 8 characters no more than 16 characters 4 When done click Apply m SNMP v3 is only able to be set when the secure connection mode is HTTPS Refer to SSL page 100 m f you don t use SNMP v3 there may be a security issue English _103 N3149S dN1 S Setup screen Auto IP configure You can set the IP available for access and camera
126. ly available network server or other readily accessible means then you must either 1 cause the Corresponding Source to be so available or 2 arrange to deprive yourself of the benefit of the patent license for this particular work or 3 arrange in a manner consistent with the requirements of this License to extend the patent license to downstream recipients Knowingly relying means you have actual knowledge that but for the patent license your conveying the covered work in a country or your recipient s use of the covered work in a country would infringe one or more identifiable patents in that country that you have reason to believe are valid If pursuant to or in connection with a single transaction or arrangement you convey or propagate by procuring conveyance of a covered work and grant a patent license to some of the parties receiving the covered work authorizing them to use propagate modify or convey a specific copy of the covered work then the patent license you grant is automatically extended to all recipients of the covered work and works based on it A patent license is discriminatory if it does not include within the scope of its coverage prohibits the exercise of or is conditioned on the non exercise of one or more of the rights that are specifically granted under this License You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing
127. mains free software for all its users We the Free Software Foundation use the GNU General Public License for most of our software it applies also to any other work released this way by its authors You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for them if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to prevent others from denying you these rights or asking you to surrender the rights Therefore you have certain responsibilities if you distribute copies of the software or if you modify it responsibilities to respect the freedom of others For example if you distribute copies of such a program whether gratis or for a fee you must pass on to the recipients the same freedoms that you received You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights Developers that use the GNU GPL protect your rights with two steps 1 assert copyright on the software and 2 offer you this License giving you legal permission to copy distribute and or modify it For the developers and authors protection
128. mera is connected over an PPPoE network it s possible for Viewer to disconnect under poor network conditions e An error may be generated when connecting with a new window or tab since the cookie data are shared Do not use a new window or tab select File gt New session e Turn off the firewall settings on your PC and then search the camera again Images overlap e Check whether two or more cameras are set to a single multicast address instead of different addresses If a single address is used for multiple cameras the images may overlap No image appears e f the transmission method is set to multicast check whether there is a router that supports multicast in the LAN the camera is connected to After setting lt Motion detection gt from lt Event gt to lt On gt files are not transmitted via email even though an event from a camera occurs e Verify the settings in the following sequence A Check lt Data amp Time gt settings B The lt Motion detection gt should be set to lt Enable gt C Check if the lt E mail gt option of lt Event action setup gt menu is checked to use 136_ appendix PROBLEM Cannot record into the Micro SD memory card SOLUTION e Check if the memory card is defective Micro SD memory card is inserted but the camera does not operate properly e Check if the memory card is inserted in the proper direction Operation of memory card that is form
129. nding Source along with the object code If the place to copy the object code is a network server the Corresponding Source may be on a different server operated by you or a third party that supports equivalent copying facilities provided you maintain clear directions next to the object code saying where to find the Corresponding Source Regardless of what server hosts the Corresponding Source you remain obligated to ensure that it is available for as long as needed to satisfy these requirements e Convey the object code using peer to peer transmission provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d A separable portion of the object code whose source code is excluded from the Corresponding Source as a System Library need not be included in conveying the object code work A User Product is either 1 a consumer product which means any tangible personal property which is normally used for personal family or household purposes or 2 anything designed or sold for incorporation into a dwelling In determining whether a product is a consumer product doubtful cases shall be resolved in favor of coverage For a particular product received by a particular user normally used refers to a typical or common use of that class of product regardless of the status of the particular user or of the way in which t
130. ng into the email server Port The default port of the email server is 25 however you can use a different port number according to the email server settings Recipient Enter the address of the email recipient Sender Enter the address of the email sender If the sender address is incorrect the email from the sender may be classified as SPAM by the email server and thus may not be sent Subject Enter a subject for your email Body Provide the text for the massage To send an event image as an email attachment 4 When done click Apply 106_ setup screen Storage You can activate recording on your device set the recording conditions check the saved data capacity and format the device itself 1 From the Setup menu select the lt Event EX gt tab 2 Click lt Storage gt 3 Select a device to save data in N3149S dN1 S 14 m f your device is properly recording data it will display Recording f you see an Error message check the following Check the storage to see if it is connected to the device Check the files in the storage to see if they are damaged Check the storage to see if they are physically damaged a lf the Error message does not disappear after following the instructions format the Micro SD card After formatting if the error message still remains replace the Micro SD card f you remove the Micro SD card without changing a button
131. ng the Micro SD memory card Do not insert the Micro SD memory card while it s upside down by force Otherwise it may damage the Micro SD memory card Inserting a Micro SD Memory Card Push the Micro SD memory card in the direction of the arrow shown in the diagram lt SNO L5083R gt 40_ installation amp connection INSTALLATION amp CONNECTION lt SNV L5083R gt Removing a Micro SD Memory Card Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card from the slot lt SND L5013 SND L5083R gt English _41 Installation amp connection lt SNV L5083R gt K Pressing too hard on the Micro SD memory card can cause the card to shoot out uncontrollably from the slot when released Before removing your Micro SD memory card turn off the camera or go to lt Storage gt turn the device off and press the Apply button Page 107 f you turn off the camera or remove the Micro SD memory card that contains data from the product the data may be lost or damaged 42_ installation amp connection MEMORY CARD INFORMATION NOT INCLUDED What is a memory card The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video audio and
132. nged gt Username wi 2 Enter the password in the lt Password gt VA input field d 3 Click OK If you have logged in successfully you will the Live Viewer screen a When you access the camera web viewer pay special attention to the security by checking whether the image data is encrypted 14 m f you check the Remember my credentials option when your input is done in future you will be logged in automatically without being prompted to enter the login information You will experience the best video quality if the screen size is 100 Reducing the ratio may cut the image on the borders 64_ web viewer INSTALLING STW WebViewer PLUGIN If connecting to a camera for the first time you will see the installation message Then install the required WebViewer Plugin to access the camera and control the video from it in real time 1 When the monitoring page is accessed for the very first time the installation ee ee OOOO page is displayed Click Click Here to lai DORE begin installation Go http 192 168 0 211 home webview amp X G SAMSUNG NETWORK CA X o m f the plug in installation file download status is suspended at 99 in the Internet Explorer browser retry it after selecting Release SmartScreen filter in Tool SmartScreen filter 2 Click Run in the message window 3 Click Yes when the notice window saying that all b
133. not apply to this License 12 RESPONSIBILITY FOR CLAIMS As between Initial Developer and the Contributors each party is responsible for claims and damages arising directly or indirectly out of its utilization of rights under this License and You agree to work with Initial Developer and Contributors to distribute such responsibility on an equitable basis Nothing herein is intended or shall be deemed to constitute any admission of liability 13 MULTIPLE LICENSED CODE Initial Developer may designate portions of the Covered Code as Multiple Licensed Multiple Licensedmeans that the Initial Developer permits you to utilize portions of the Covered Code under Your choice of the MPL or the alternative licenses if any specified by the Initial Developer in the file described in Exhibit A EXHIBIT A Mozilla Public License The contents of this file are subject to the Mozilla Public License Version 1 1 the License you may not use this file except in compliance with the License You may obtain a copy of the License at http www mozilla org MPL Software distributed under the License is distributed on an AS IS basis WITHOUT WARRANTY OF ANY KIND either express or implied See the License for the specific language governing rights and limitations under the License The Original Code is The Initial Developer of the Original Code is Portions created by are Copyright C _ All Rights Reserved Contributor s
134. nse they are outside its scope The act of running the Program is not restricted and the output from the Program is covered only if its contents constitute a work based on the Program independent of having been made by running the Program Whether that is true depends on what the Program does 1 You may copy and distribute verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and give any other recipients of the Program a copy of this License along with the Program You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Program or any portion of it thus forming a work based on the Program and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change b You must cause any work that you distribute or publish that in whole or in part contains or is derived from the Program or any part thereof to be licensed as a whole at no charge to all third parties unde
135. nt and prominently visible feature that 1 displays an appropriate copyright notice and 2 tells the user that there is no warranty for the work except to the extent that warranties are provided that licensees may convey the work under this License and how to view a copy of this License If the interface presents a list of user commands or options such as a menu a prominent item in the list meets this criterion 1 Source Code The source code for a work means the preferred form of the work for making modifications to it Object code means any non source form of a work A Standard Interface means an interface that either is an official standard defined by a recognized standards body or in the case of interfaces specified for a particular programming language one that is widely used among developers working in that language The System Libraries of an executable work include anything other than the work as a whole that a is included in the normal form of packaging a Major Component but which is not part of that Major Component and b serves only to enable use of the work with that Major Component or to implement a Standard Interface for which an implementation is available to the public in source code form A Major Component in this context means a major essential component kernel window system and so on of the specific operating system if any on which the executable work runs or a
136. o provide support service warranty or updates for a work that has been modified or installed by the recipient or for the User Product in which it has been modified or installed Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network Corresponding Source conveyed and Installation Information provided in accord with this section must be in a format that is publicly documented and with an implementation available to the public in source code form and must require no special password or key for unpacking reading or copying 7 Additional Terms Additional permissions are terms that supplement the terms of this License by making exceptions from one or more of its conditions Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License to the extent that they are valid under applicable law If additional permissions apply only to part of the Program that part may be used separately under those permissions but the entire Program remains governed by this License without regard to the additional permissions When you convey a copy of a covered work you may at your option remove any additional permissions from that copy or from any part of it Additional permissions may be written to require their own removal in certain cases wh
137. oftware without restriction including without limitation the rights to use copy modify merge publish distribute sublicense and or sell copies of the Software and to permit persons to whom the Software is furnished to do so subject to the following conditions University of Illinois NCSA Open Source Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimers Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimers in the documentation and or other materials provided with the distribution Neither the names of the University of Illinois NCSA nor the names of its contributors may be used to endorse or promote products derived from this Software without specific prior written permission THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT IN NO EVENT SHALL THE CONTIBUTORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM DAMAGES OR OTHER LIABILITY WHETHER IN AN ACTION OF CONTRACT TORT OR OTHERWISE ARISING FROM OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE PHP 3 01 License The PHP License version 3 01 Copyright c 1999 2010 The PHP Group All rights reserved Component Name License php 5 2 1
138. og appears SSS Ss lt IP Address gt lt Subnet Mask gt lt Gateway gt lt HTTP Port gt and lt VNP Port gt of the camera are displayed in the preset values 54 network connection and setup 3 In the lt Address gt pane provide the Manual Setting necessary information for C DHCP ro STATIC pe Port feo e MAC Ethernet Address The MAC MAC Address CDR 7 WP Pot FE IP ddress 192 168 1 100 address imprinted on the camera Subnet Mask 255 2 1 label is automatically displayed and abi Ses i Password requires no user setting m Cancel 4 P related parameters can be set only when DHCP is not checked If not using a Broadband Router For setting lt IP Address gt lt Subnet Mask gt and lt Gateway gt contact your network administrator 4 In the lt Port gt pane provide necessary Manual setting information Re re PPPoE C DHCP STATIC HTTP Port feo e HTTP Port Used to access the MAC Addreso CESSE j Pre le camera using the Internet browser pme defaulted to 80 a L e VNP Port Used to control the video signal transfer defaulted to 4520 Cancel 5 Enter the password Enter the password of admin account which was used to access the camera i For the security purposes you are recommended to use a combination of numbers alphabets uppercase and lowercase and special characters f
139. om this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Part 3 Cambridge Broadband Ltd copyrightnotice BSD Portions of this code are copyright c 2001 2008 Cambridge Broadband Ltd All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met yy Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer yy Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution yy Th
140. om this License are offered by You alone not by the Initial Developer or any Contributor You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of any such terms You offer 3 7 Larger Works You may create a Larger Work by combining Covered Code with other code not governed by the terms of this License and distribute the Larger Work as a single product In such a case You must make sure the requirements of this License are fulfilled for the Covered Code 4 Inability to Comply Due to Statute or Regulation If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered Code due to statute judicial order or regulation then You must a comply with the terms of this License to the maximum extent possible and b describe the limitations and the code they affect Such description must be included in the LEGAL file described in Section 3 4 and must be included with all distributions of the Source Code Except to the extent prohibited by statute or regulation such description must be sufficiently detailed for a recipient of ordinary skill to be able to understand it 5 Application of this License This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related Covered Code 6 Versions of the License 6 1 New Versions Netscape C
141. ommunications Corporation Netscape may publish revised and or new versions of the License from time to time Each version will be given a distinguishing version number 6 2 Effect of New Versions Once Covered Code has been published under a particular version of the License You may always continue to use it under the terms of that version You may also choose to use such Covered Code under the terms of any subsequent version of the License published by Netscape No one other than Netscape has the right to modify the terms applicable to Covered Code created under this License 6 3 Derivative Works If You create or use a modified version of this License which you may only do in order to apply it to code which is not already Covered Code governed by this License You must a rename Your license so that the phrases Mozilla MOZILLAPL MOZPL Netscape MPL NPL or any confusingly similar phrase do not appear in your license except to note that your license differs from this License and b otherwise make it clear that Your version of the license contains terms which differ from the Mozilla Public License and Netscape Public License Filling in the name of the Initial Developer Original Code or Contributor in the notice described in Exhibit A shall not of themselves be deemed to be modifications of this License 7 DISCLAIMER OF WARRANTY COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN AS IS BASIS WITHOUT
142. onnection gt or lt HTTPS Secure connection mode using a unique certificate gt 100_ setup screen 802 1x When connecting network you can choose whether using 802 1x protocol and then install the certification 1 From the Setup menu select the lt Network EI gt tab 2 Click lt 802 1x gt 3 Set the lt IEEE 802 1x setting gt e IEEE 802 1x Specify the use of the 802 1x protocol e EAP type Select EAP TLS or LEAP e EAPOL version Select version 1 or 2 e D Enter the client certificate ID in EAP TLS and the user ID in LEAP e Password Enter the client private key password in EAP TLS and the user password in LEAP You do not have to enter the password in EAP TLS if it uses a key file that is not encrypted pu m f the connected network device does not support the 802 1x protocol the protocol will not operate properly even if you set it LEAP is an authentication method with poor security Use it only in an environment where EAP TLS is not available 4 nstall remove the certificate The certificate is needed only for EAP TLS e CA certificates Select a public certificate that contains the public key e Client certificate Select a public certificate that contains the client certificate key e Client private Key Select a public certificate that contains the client private key 5 When done click Apply To install remove 802 1x related certificates 1 Press the Browse EZE
143. onnection setting items con Default folder 11 After entering item 10 check lt On gt 12 Click the Apply button Finish saving by using the NAS English _113 Setup screen Time schedule You can set to save the video data at a certain interval as scheduled regardless of the actual occurrence of the event 1 From the Setup menu select the lt Event EX gt tab Click lt Time schedule gt Set whether or not to lt Enable gt Specify the lt Transfer interval gt a A N Specify the lt Activation time gt e Always Always activates in operated mode at the set interval e Only scheduled time Periodically activates in operated mode at a specified time and date a The transfer interval setting value must be smaller than the preset activation interval to succeed in image transmission 6 Specify the activation conditions e FTP To set whether or not to send FTP when an event is detected Refer to FTP E mail for more details page 105 7 When done click Apply TH 114_ setup screen Tampering detection You can set to detect tampering attempts and trigger events such as sudden change of camera s framing direction blocked lens and other overall change of scenes from the video 1 From the Setup menu select the lt Event EX gt tab 2 Click lt Tampering detection gt 3 Set whether or not to lt Enable gt 4 Set the tampering detec
144. onstitutes a covered work This License acknowledges your rights of fair use or other equivalent as provided by copyright law You may make run and propagate covered works that you do not convey without conditions so long as your license otherwise remains in force You may convey covered works to others for the sole purpose of having them make modifications exclusively for you or provide you with facilities for running those works provided that you comply with the terms of this License in conveying all material for which you do not control copyright Those thus making or running the covered works for you must do so exclusively on your behalf under your direction and control on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you Conveying under any other circumstances is permitted solely under the conditions stated below Sublicensing is not allowed section 10 makes it unnecessary 3 Protecting Users Legal Rights From anti Circumvention Law No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996 or similar laws prohibiting or restricting circumvention of such measures When you convey a covered work you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exerc
145. oof butyl rubber tape can be purchased in stores so that water does not leak from the gap of the cable connected to the outside 1 2 Connect the cable aaa co System Wrap the black cable jacket Area A and the cable connection area with waterproof butyl HT rubber tape so that more than half of the TT gt butyl rubber tape is overlapped LLL A gt g 0 m f the cable jacket is not waterproofed properly erfi fien then it can directly cause leakage Make sure to protect the cable with a dense layer of taping Waterproof butyl tape is made of butyl rubber that can be stretched to twice its normal length 36_ installation amp connection Optional Accessories for Installation For your easier installation you can purchase appropriate optional accessories available 1 WALL MOUNT ADAPTOR SBP 300WM or SBP 300WM1 HANGING MOUNT SBP 301HM2 SNV L5083R SBP 301HM4 SND L5083R SBP 300HM7 SND L5013 This adaptor is used when installing the dome camera onto a wall NOILOANNODO 8 NOILLVTIVLSNI 2 CEILING MOUNT ADAPTOR SBP 300CM HANGING MOUNT SBP 301HM2 SNV L5083R SBP 301HM4 SND L5083R SBP 300HN7 SND L5013 This adaptor is used when installing the dome camera on a concrete ceiling English _37 Installation amp connection 3 POLE MOUNT ADAPTOR SBP 300PM This is an adaptor for WALL MOUNT ADAPTOR SBP 300WM or SBP 300WM1 installation on a pole whose diameter is bigge
146. ools Internet Options General and delete all the search records 66_ web viewer USING THE LIVE SCREEN 2 0 setup ADMIN M Status H2M3IA GAM Profile access information You can read the profile information Item Description 1 Monitoring Move to the monitoring screen Move to the screen where you can search for the video recording saved in your Micro 2 Playback SD memory card or NAS 3 Setup Move to the Setup screen 4 g Viewer Screen Displays the Live video on the screen You can use the mouse wheel to activate the digital zooming in Viewer screen English _67 web viewer Item Description You can select a profile type in lt Video profile gt under the lt Basic gt setup menu When the Web Viewer is connected the profile information currently using is displayed Afterimages can be displayed on the screen under the following conditions if the 6 Profile type video is played in the monitoring page The resolution is changed due to a profile change Incoming data is being slowed due to a network delay when the profile is changed The web browser window size and location is changed Screen POSF ho The video size of the camera will switch to as big as the Web browser Optimization Fy tharesalition Regardless of the resolution setup configured in the camera it sets the resolution to 640x480 Press it again to sw
147. or part of the Source Code or the Modified Source Code 11 Derivative Work means the Modified Source Code or the Binary Code 12 Embedded Product means any product which operates with executable code form of the Source Code the Modified Source Code or the Binary Code loaded on its hardware 13 End User means a consumer who uses the Embedded Product 14 System Developer means any person who develops the Embedded Product by itself or has a third party develop the same and provides whether with or without payment the End User with the Embedded Product 15 Distributor of Modification means any person who produces the Modified Source Code and whether with or without payment distributes the same to any third party 16 Patch for Modification means a difference program system or the like in order to create the Modified Source Code from the Source Code or the Binary Code thereof 17 Vicarious Execution of Patch Processing means vicarious execution service to create the Modified Source Code applying the Patch for Modification to the Source Code or the Binary Code thereof 18 Source Code User means a person who uses the Source Code 19 Distribution means any of the following acts 1 to transmit a work to a large number of specific persons through the Internet communication broadcasting and the like 2 to transmit a work to the general public through the Internet communication broadcasting and the
148. or when unused for A long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped English _3 overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus To prevent injury this apparatus must be securely attached to the Wall ceiling in accordance with the installation instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral tri
149. or your password m f you want to change the password refer to Administrator password change of the user setup page 82 6 Click OK Manual network setup will be completed English _55 dN13S ANY NOILOANNOO MYOMLAN network connection and setup If using a Broadband Router e IP Address Enter an address falling in Wireless G Broad the IP range provided by the Broadband mens mo MUR Router ex 192 168 1 2 254 omais Coniguraion DACP 1 192 168 0 2 254 sas nn 192 168 XXX 2 254 e Subnet Mask The lt Subnet Mask gt of the Broadband Router will be the lt Subnet Mask gt of the camera e Gateway The lt Local IP Address gt of the Broadband Router will be the lt Gateway gt of the camera 14 The settings may differ depending on the connected Broadband Router model For more information refer to the user manual of the applicable router For more information about port forwarding of the broadband router refer to Port Range Forward Port Mapping Setup Page 59 If the Broadband Router has more than one camera connected Configure the IP related settings and the Port related settings distinctly with each other ex Category Camera 1 Camera 2 IP Address 192 168 1 100 192 168 1 101 IP related settings Subnet Mask 255 255 255 0 255 255 255 0 Gateway 192 168 1 1 192 168 1 1 HTTP Port 8080 8081 Port related settings VNP Port 4520 4521 14 m f the lt HTTP Port gt
150. ores all camera settings to the factory default Press and hold for about 5 seconds to reboot the system E If you reset the camera the network settings will be adjusted so that Reset Button DHCP can be enabled If there is no DHCP server in the network you must run the IP Installer program to change the basic network settings such as IP address Subnet mask Gateway etc before you can connect to the network Micro SD Memory 2 Card Compartment Compartment for the Micro SD memory card 3 Sunshield It protects the camera from the direct sunlight 4 Sunshield Hold It fixes the sunshield with the camera Focusing on a near object Near Focus control lever Focusing on a far object Fan By rotating it to the right or the left the focus can be controlled By rotating it clockwise the focus can be fixed Zoom in Tle 6 Zoom control lever Zoom out Wide By rotating it to the right or the left the lens zoom can be adjusted By rotating it clockwise the zoom can be fixed g 14 Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied ethanol 22 overview Components O O lt m Z m 3 4 Item Description 1 Audio In Jack Used to connect to a microphone 2 PoE Connector Connects to the network and supplies power through Ethernet cable 3 IR LED These infrared LED s are controlled by the illumination sensor 4 Illumination Senso
151. orum of and register a name and description of the Modified Source Code in such a way as specified by T Engine Forum 4 The Distributor of Modification shall determine the name of the Modified Source Code subject to the rules separately established by T Engine Forum and publish an appropriate notice as required by the rules on the Patch for Modification and the Modified Source Code 5 The Distributor of Modification may distribute the Modified Source Code to a third party whether with or without payment provided that the Distributor of Modification shall take the necessary measures to prohibit the third party from making the re Distribution of the Modified Source Code 6 Developer with the Patch for Modification Provided however that the Distributor of Modification shall be obligated to confirm that the System Developer is the Source Code User duly licensed under Article 4 1 7 The Distributor of Modification may perform the Vicarious Execution of Patch Processing for the System Developer 8 The System Developer shall not distribute the Modified Source Code in further modified form to any third party as a stand alone software product 9 The System Developer may under the same obligation as imposed in Article 4 5 make the Embedded Product available for the End User through use of the Patch for Modification distributed by the Distributor of Modification or the Derivative Works obtained through the Vicarious Execution of Patch
152. ou must make it absolutely clear than any such warranty Support indemnity or liability obligation is offered by You alone and You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of warranty support indemnity or liability terms You offer 3 6 Distribution of Executable Versions You may distribute Covered Code in Executable form only if the requirements of Section 3 1 3 5 have been met for that Covered Code and if You include a notice stating that the Source Code version of the Covered Code is available under the terms of this License including a description of how and where You have fulfilled the obligations of Section 3 2 The notice must be conspicuously included in any notice in an Executable version related documentation or collateral in which You describe recipients rights relating to the Covered Code You may distribute the Executable version of Covered Code or ownership rights under a license of Your choice which may contain terms different from this License provided that You are in compliance with the terms of this License and that the license for the Executable version does not attempt to limit or alter the recipient s rights in the Source Code version from the rights set forth in this License If You distribute the Executable version under a different license You must make it absolutely clear that any terms which differ fr
153. ould be in the range of 192 168 20 1 192 168 20 255 Check whether you tried to access as another user without formatting the default folder saved or used Confirm that you used recommended NAS equipment 4 After the settings are completed set the NAS unit to lt On gt 5 Click the Apply EZA button 6 Log in the NAS and check the lt Free size gt and lt Total size gt You can format the default folder specified in the NAS connection setting by clicking the lt Format gt button a Since data may not be saved after a temporary network interruption when using NAS it is recommended that you use SD at the same time to prevent loss of recorded images The data traffic will increase when the camera is set to higher resolution higher bit rate and or higher framerate If there is too much data traffic some frame may be skipped although it is stored in a full frame When a frame skip occurs images are saved at the rate of min one image per sec 110_ setup screen NAS Network Attached Storage guide The following is a description of how to save data using the NAS according to the Synology Since data may not be saved after a temporary network interruption when using NAS it is recommended that you use SD at the same time to prevent loss of recorded images If the setting allows a Micro SD memory card and the NAS to be simultaneously connected for use the higher priority for recording goes to the NAS If you activate O
154. outer Camera 192 168 1 100 T E P HTTP pon Devoe por RTSP port 14 Port forwarding can be done without additional router setup if the router supports the UPnP Universal Plug and Play function After connecting the network camera set lt Quick connect gt of lt Samsung DDNS gt to lt On gt in the Setup Network DDNS menu 60_ network connection and setup CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1 Run the IP Installer ENA Device Name Alias MAC Address IP Address Protocol URL It will scan for connected cameras and display them as a list 2 Double click a camera to access The Internet browser starts and connects to the camera F Pv PF IP6 Search 14 Access to the camera can also be gained by typing the camera s IP address in the address bar of the Internet browser CONNECTING TO THE CAMERA FROM A REMOTE PC VIA THE INTERNET Since using the IP Installer on a remote computer that is not in the Broadband Router s network cluster is not allowed users can access cameras within a Broadband Router s network by using the camera s DDNS URL 1 Before you can access a camera in the Broadband Router network you should have set the port range forward for the Broadband Router 2 From the remote PC launch the Internet browser and type the DDNS URL address of the camera or the IP add
155. p and the router s port forwarding setup are required For port forwarding setup refer to Port Range Forward Port Mapping Setup page 59 98_ setup screen IP filtering You can create a list of IPs that you want to grant or deny access to them 1 From the Setup menu select the lt Network EI gt tab 2 Click lt IP filtering gt 3 Select lt Filtering type gt e Deny If selecting this access from those IPs that are added to the filtering will be restricted e Allow If selecting this access from only those IPs that are added to the filtering will be accepted 4 Click the Add EM button The IP list will be created 5 Provide the IP that you want to grant or deny access from When you enter an IP address and a Prefix the list of IP addresses available will appear in the right side filter range column N3149S dN1 S 14 m f selected lt Allow gt for IP Filtering and lt IPv6 setup gt of lt IP amp Port gt is set to lt Use gt both IPv4 and IPv6 addresses of the computer currently configuring should be assigned The IP address of the computer used for the current setup cannot be added to lt Deny gt it should be added to lt Allow gt Only the IP addresses that are set to lt Use gt will be displayed in the filter column 6 Select an IP to delete from the list Click the Delete button 7 When done click Apply English _99 Setup screen SSL You
156. pant to You under Sections 2 1 and or 2 2 of this License shall upon 60 days notice from Participant terminate prospectively unless if within 60 days after receipt of notice You either i agree in writing to pay Participant a mutually agreeable reasonable royalty for Your past and future use of Modifications made by such Participant or ii withdraw Your litigation claim with respect to the Contributor Version against such Participant If within 60 days of notice a reasonable royalty and payment arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not withdrawn the rights granted by Participant to You under Sections 2 1 and or 2 2 automatically terminate at the expiration of the 60 day notice period specified above b any software hardware or device other than such Participants Contributor Version directly or indirectly infringes any patent then any rights granted to You by such Participant under Sections 2 1 b and 2 2 b are revoked effective as of the date You first made used sold distributed or had made Modifications made by that Participant 8 3 If You assert a patent infringement claim against Participant alleging that such Participant s Contributor Version directly or indirectly infringes any patent where such claim is resolved such as by license or settlement prior to the initiation of patent infringement litigation then the reasonable value of the licenses granted by such Par
157. r Detects incoming light to control the IR LED English _23 overview AT A GLANCE SNV L5083R Appearance Item Description 1 Dome cover Case cover used to protect the lens and the main unit 2 Camera Case Housing part that covers the camera body 24 overview Components 1 2 3 English _25 M3IA43AO Overview 9 N g 5 o 26_ overview Item Description Lens Lens for the camera Illumination Sensor Detects incoming light to control the IR LED IR LED These infrared LED s are controlled by the illumination sensor iT Zoom in Tele Zoom control lever Pwo Zoom out Wide By rotating it to the right or the left the lens zoom can be adjusted By rotating it clockwise the zoom can be fixed Focusing on a near object Near Focus control lever Focusing on a far object Far By rotating it to the right or the left the focus can be controlled By rotating it clockwise the focus can be fixed The button restores all camera settings to the factory default Press and hold for about 5 seconds to reboot the system E If you reset the camera the network settings will be adjusted so that Reset Button DHCP can be enabled If there is no DHCP server in the network you must run the IP Installer program to change the basic network settings such as IP address Subnet mask Gateway etc before you can connect to the network
158. r than 80mm 4 CORNER MOUNT ADAPTOR SBP 300KM This is an adaptor for WALL MOUNT ADAPTOR SBP 300WM or SBP 300WM1 installation on the corner of wall joint 38_ installation amp connection Adjusting the monitoring direction for the camera SND L5013 SND L5083R SNV L5083R NOILOANNODO 8 NOILLVTIVLSNI Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling Where rotating the camera unit to the left or right is called Pan adjusting the tilt is called Tilt and turning the lens on its axis is called Rotation The effective range of pan is a total of 350 degrees The effective range of rotation is a total of 355 degrees The effective range of tilt is a total of 67 degrees The image can be covered up by the camera case depending on the angle Do not forcefully turn the focus zoom lens after the dome case is disassembled Otherwise it may cause an incorrect focus due to a motor failure Methods of adjustment 1 After installing the camera adjust the panning angle in consideration of the monitoring direction 2 Set the horizontal angle so that the image is not reversed 3 Adjust the tilt angle so that the camera faces toward the monitoring object English _39 Installation amp connection INSERTING REMOVING A MICRO SD MEMORY CARD Disconnect the power cable from the camera before inserti
159. r the terms of this License c If the modified program normally reads commands interactively when run you must cause it when started running for such interactive use in the most ordinary way to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty or else saying that you provide a warranty and that users may redistribute the program under these conditions and telling the user how to view a copy of this License Exception if the Program itself is interactive but does not normally print such an announcement your work based on the Program is not required to print an announcement These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Program and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Program the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative
160. rames per sec 14 The lt Sensor gt mode setup in Camera Setup changes the maximum configurable framerate Sensor 25 fps 30 fps Framerate 1 25 fps 1 30 fps e Maximum bitrate Set the max bit rate of video when the bit rate control is set to VBR A As the bit rate can be adjusted limitedly according to the resolution frame rate and screen complexity the actual bit rate can be greater than the maximum bit rate So you must consider the use conditions when setting the value e Target bitrate Set the target bit rate when the bit rate control is set to CBR e Bitrate control You can select one from constant bit rate and variable bit rate for compression Fixed bitrate means that the network transmission bitrate is fixed while varying the video quality or frame rate variable bitrate means that a higher priority is placed on the video quality while varying the bitrate m m After setting the fixed bit rate for bit control if you select the video quality priority mode depending on the complexity of the screen the actual transmitted frame rate may differ from the frame rate setup in order to guarantee the optimal video quality for the given bit rate 80_ setup screen e Encoding priority You can set the priority of video transmission to frame rate or compression e GOV length It specifies the distance in terms of number of frames between two consecutive I Frames in a video sequence when H 264 codec was selected One l Fr
161. rated on the target hardware and is designated and separated as such part 5 Header File means the part of the Source Code which contains definitions necessary to develop application programs 6 T Engine Hardware means the hardware which is manufactured in accordance with the T Engine Hardware specifications or the uT Engine Hardware specifications issued by T Engine Forum and registered with T Engine Forum 7 Similar Hardware to T Engine Hardware means any hardware including software which emulates hardware other than that defined in Article 2 6 above on which the T Kernel can be operated 8 Ported Source Code means a source program produced from the Source Code by modifying only its Hardwaredependent Part and or Compiler dependent Part to enable it to be operated on the T Engine Hardware or the Similar Hardware to T Engine Hardware The Ported Source Code which is registered with T Engine Forum shall be included in the Source Code 9 Modified Source Code means a source program modified from the Source Code for the purpose of improving its performance increasing or decreasing its function and the like The Ported Source Code shall not be included in the Modified Source Code established by T Engine Forum on January 23 2004 revised on June 17 2004 revised on December 21 2006 revised on March 24 2009 10 Binary Code means an executable code form which is created by compiling programs which include all
162. ress of the Broadband Router in the address bar ex http www samsungipolis com Product ID 14 For registering the DDNS settings refer to Registering with DDNS page 96 English _61 dN13S ANY NOILOANNOO MYOMLAN web viewer CONNECTING TO THE CAMERA Normally you would 1 Launch the Internet browser D http 192 168 1 100 192 168 1100 2 Type the IP address of the camera in the address bar ex IP address IPv4 192 168 1 100 ne mu gt http 192 168 1 100 the Login dialog should appear sd e IP address IPv6 2001 230 abcd ee ffff 0000 0000 ffff 1111 gt http 2001 230 abca ffff 0000 0000 fff 1111 the Login dialog should appear If the HTTP port is other than 80 1 Launch the Internet browser 2 Type the IP address and HTTP port number of the camera in the address bar ex IP address 192 168 1 100 HTTP Port number 8080 gt http 192 168 1 100 8080 the Login dialog should appear Using URL 1 Launch the Internet browser 2 Type the DDNS URL of the camera in the address bar ex URL address http www samsungipolis com Product ID the Login dialog should appear Ki Network connection is disabled in the LAN only environment 62_ web viewer Connecting via UPnP 1 Run the client or operating system in support of the UPnP protocol 2 Click the camera name for search In the W
163. rowser windows will be closed 14 Steps 4 and 5 will be skipped if no Web Viewer Plug in is installed 4 When the old version of the Web Viewer Plug in is installed a notice window saying the old version will be deleted is e STWWebViewer for Windows 1 0 93 will be uninstalled displayed Click Yes when the notice window is displayed English _65 H3M3IA GAM web viewer 5 Click OK STWWebViewer for Windows 1 0 93 Uninstall The old version of Web Viewer Plug in 7 H 7 STWWebViewer for Windows 1 0 93 uninstallation completed is deleted iJ j 6 Click Install to begin installation of the CENTER Web Viewer Plug in Welcome to the STWWebViewer for Windows 1 0 93 Setup Wizard Welcome to Samsung Techwin Network Camera Webviewer Installation Please make sure all opened browsers are completely dosed 7 Click Finish Gy STWWebViewer for Windows 1 0 93 Setup STW Web Viewer Plug in installation is Completing the STWWebViewer for com pl ete d Windows 1 0 93 Setup Wizard STWWebViewer for Windows 1 0 93 has been installed on your computer Click Finish to dose this wizard El In your internet explorer if you need to move to the installation screen after installing the STW webviewer plugin check whether webviewer_ activexplugin_lib control in the Tool Additional Function Management menu is Activated If not and if there is a persisting problem then select T
164. s Source Code of computer software code which is described in the Source Code notice required by Exhibit A as Original Code and which at the time of its release under this License is not already Covered Code governed by this License 1 10 1 Patent Claims means any patent claim s now owned or hereafter acquired including without limitation method process and apparatus claims in any patent Licensable by grantor 1 11 Source Code means the preferred form of the Covered Code for making modifications to it including all modules it contains plus any associated interface definition files scripts used to control compilation and installation of an Executable or source code differential comparisons against either the Original Code or another well known available Covered Code of the Contributor s choice The Source Code can be in a compressed or archival form provided the appropriate decompression or de archiving software is widely available for no charge 1 12 You or Your means an individual or a legal entity exercising rights under and complying with all of the terms of this License or a future version of this License issued under Section 6 1 For legal entities You includes any entity which controls is controlled by or is under common contro with You For purposes of this definition control means a the power direct or indirect to cause the direction or management of such entity whether by contract or o
165. s apparatus yourself e Do not place a glass of water on the product e Do not install near any magnetic sources e Do not block any ventilation openings e Do not place heavy items on the product User s Manual is a guidance book for how to use the products The meaning of the symbols are shown below e Reference In case of providing information for helping of product s usages e Notice If there s any possibility to occur any damages for the goods and human caused by not following the instruction X Please read this manual for the safety before using of goods and keep it in the safe place 6_ overview CONTENTS OVERVIEW INSTALLATION amp CONNECTION NETWORK CONNECTION AND SETUP 3 27 29 33 40 43 44 49 50 51 52 53 54 58 61 61 Important Safety Instructions Product Features Recommended PC Specifications Recommended Micro SD SDHC Memory Card Specifications NAS recommended specs What s Included At a Glance SND L5013 At a Glance SND L5083R At a Glance SNO L5083R At a Glance SNV L5083R MAIAYSAO Installation SND L5013 SND L5083R Installation SNO L5083R Installation SNV L5083R Inserting Removing a Micro SD Memory Card Memory Card Information Not Included Connecting with other Device Connecting the Camera Directly to Local Area Networking Connecting the Camera Directly to a DHCP Based DSL Cable Modem Connecting the Camera Directly to
166. s of simple background or low illumination and night time may lower the detection sensitivity A severe shaking of the camera or a drastic change to the illumination can be considered a tampering by mistake Detection of the tampering may take some time maximum 5 seconds right after the tampering was made Once a tampering is detected the camera will resume a normal operating after a certain stability time approx 5 seconds during which no detection will be performed 116_ setup screen Motion detection Can be set to generate an event signal when a motion detection event is detected 1 From the Setup menu select the lt Event EX gt tab Click lt Motion detection gt Set whether or not to lt Enable gt Set lt Sensitivity gt lt Size gt and lt Area gt a BB W N Specify the activation time and activation condition For more information about lt Activation time gt and lt Action gt refer to Tampering detection page 115 6 When done click Apply English _117 NJJY0S dN1 S Setup screen w Before using set the minimum and maximum motion sizes to suit desired motion range to be detected Detected size of an object may have difference with the actual size according to its shape Up to 16 objects from the top side of the screen can be displayed m Inthe following cases motion detection function may be degraded or cause improper detection The
167. s of the University of California not be used in advertising or publicity pertaining to distribution of the software without specific written permission CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS IN NO EVENT SHALL CMU OR THE REGENTS OF THE UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM THE LOSS OF USE DATA OR PROFITS WHETHER IN AN ACTION OF CONTRACT NEGLIGENCE OR OTHER TORTIOUS ACTION ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE Part 2 Networks Associates Technology Inc copyright notice BSD Copyright c 2001 2008 Networks Associates Technology Inc All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met yy Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer yy Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution yy Neither the name of the Networks Associates Technology Inc nor the names of its contributors may be used to endorse or promote products derived fr
168. se you may not use this file except in compliance with the License You may obtain a copy of the License at http www apache org licenses LICENSE 2 0 Unless required by applicable law or agreed to in writing software distributed under the License is distributed on an AS IS BASIS WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND either express or implied See the License for the specific language governing permissions and limitations under the License BZip2 License This program bzip2 the associated library libbzip2 and all documentation are copyright C 1996 2007 Julian R Seward All rights reserved Component Name License bzip2 1 0 5 Bzip2 Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 The origin of this software must not be misrepresented you must not claim that you wrote the original software If you use this software in a product an acknowledgment in the product documentation would be appreciated but is not required 3 Altered source versions must be plainly marked as such and must not be misrepresented as being the original software 4 The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission URL
169. select the lt Basic gt tab 2 Click lt User gt 3 Provide the necessary user information e Administrator password change Change the password for the administrator En For the security purposes you are recommended to use a combination of numbers alphabets uppercase and lowercase and special characters for your password m tis recommended to change your password once every three months The password length and limits are shown as follows A combination of at least three types of upper case lower case numeric and special characters 8 to 9 characters A combination of at least two types of upper case lower case numeric and special characters 10 to 15 characters Should be different from the ID Cannot repeat the same letter number of special characters more than 4 times Don t use 4 or more characters consecutive together examples 1234 abcd Don t use 4 or more characters repeated examples 1111 aaaa Special characters that are allowed _ If After the factory setting the admin and user passwords are initialized You need to reset the password When you access the camera web page for the first time or access it after the initialization you will be moved to the admin password setting menu In this menu you need to login again with the new password before using the camera web page menus 82_ setup screen lf the existing password
170. ser dN13S ANY NOILOANNOO MYOMLAN External Remote PC I BS lt Local Network gt 14 Aremote PC in an external Internet out of the LAN network may not be able to connect to the camera installed in the intranet if the port forwarding is not properly set or a firewall is set In this case to resolve the problem contact your network administrator Inthe IP installer you can use the initial password 4321 to set IP Address Subnet Mask Gateway HTTP Port VNP Port IP type After changing the network interface for better security access the web viewer and change the password By factory default the IP address will be assigned from the DHCP server automatically If there is no DHCP server available the IP address will be set to 192 168 1 100 To change the IP address use the IP Installer For further details on IP Installer use refer to Static IP Setup Page 54 English _49 network connection and setup CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL CABLE MODEM INTERNET Camera External Remote PC DDNS Server Data Center KOREA 1 Connect the user PC directly with the network camera N Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet Use the Internet browser to connect to the web viewer Move to Setup page Mov
171. settings including the camera settings however the log information will not be reset The IP addressing system will be defaulted to DHCP if you reset the camera If no DHCP server is found the previous settings will be restored automatically e Configuration backup amp Restore Backs up the current system settings before performing the restoration process The system is automatically restarts after backup or restoration e Restart Restarts the system 122 setup screen To perform the upgrade 1 Click Upgrade 2 Click Browse and specify a file to upgrade 3 Click Send 4 The Upgrade dialog appears where the progression will be shown in the bottom 5 Once completed upgrading the browser exits and the camera restarts 14 t may take a max of 10 minutes for the upgrade process If you forcibly terminate the upgrade process upgrade will not be completed properly During restarting the system accessing with web viewer will not be made Upgrade 11 Downloading has started You can download the latest version from the Samsung web site www samsungcctv com English _123 N3149S dNLAS Setup screen To back up the current settings 1 Click Backup The Save As dialog should appear Specify the backup path with a proper file name and click Save The backup file will be saved to the specified path in the format of bin To restore the bac
172. site nor the developer version will be supported For IPv6 connection Window 7 or higher is recommended For Mac OS X only the Safari browser is supported e Video Memory 256MB or higher i m f the driver of the video graphic adapter is not installed properly or is not the latest version the video may not be played properly Fora multi monitoring system involving at least 2 monitors the playback performance can be deteriorated depending on the system 10 _ overview RECOMMENDED MICRO SD SDHC MEMORY CARD SPECIFICATIONS e Recommended capacity 4GB 32GB e For your camera we recommend you use a memory card from the following manufacturers Micro SD SDHC Memory Card Sandisk Transcend e Memory cards with a specification of Class 10 UHS 1 or higher are recommended NAS RECOMMENDED SPECS e Recommended capacity 200GB or higher is recommended e Simultaneous access One unit of NAS can accept a maximum of sixteen camera accesses e For this camera you are recommended to use a NAS with the following manufacturer s specs Recommended products Available sizes Netgear NAS A maximum of 16 cameras can access simultaneously Synology NAS A maximum of 16 cameras can access simultaneously When you use Netgear s NAS equipment do not allocate the capacity for use f you use NAS equipment for purposes other than video saving the number of accessible cameras may be reduced English _11 MAIAYSAO
173. sitivity Affect the transfer rate according to the variance in the network bandwidth The transfer rate will be adjusted to the fastest if the bandwidth is lt Very high gt and adjusted to the latest if the bandwidth is lt Very low gt e ATC limit If the quality or frame rate is adjusted the property will be changed to the applied value against the previous setting value 100 Note that if you reduce the property value too much you may encounter flickering on the screen So it is advisable to adjust the value within the threshold tis recommended to apply ATC control only for cameras supporting ATC Set the ATC sensitivity to lt Very low gt in a network environment with high variance in the network bandwidth m f the network connection is unstable you may encounter flickering on the screen 7 When done click Apply EZH English _79 N3149S dN1 S Setup screen To Add Change the Video Profile The profile setup can be added or modified to accommodate various profiles depending on the recording conditions 1 Select one from the lt Video profile gt options 2 Provide the name and select a codec 3 Specify the conditions under which the codec will be applied 4 Specify the details of the selected codec including resolution and frame rate Click lt Advanced gt to display the context menu e Resolution Set the video size of the H 264 and MJPEG files e Framerate Set the max number of video f
174. st of physically performing source distribution might be charged GPL SW Component Name License URL Base Kernel GPL 3 0 Busybox GPL 2 0 http Awww busybox net downloads snapshots iproute2 3 1 0 GPL 2 0 alsa utils 1 0 24 2 GPL 2 0 alsa lib 1 0 24 1 GPL 2 0 iptables 1 4 12 2 GPL 2 0 http ftp nettfilter org pub iptables ethtool 3 2 GPL 2 0 mtd 1 4 1 GPL 2 0 ftp ftp infradead org pub mtd utils mii diag 2 11 GPL 2 0 rp pppoe 3 10 GPL 2 0 http www roaringpenguin com pppoe wpa_supplicant 0 7 3 GPL 2 0 bash 4 2 GPL 3 0 zeroconf GPL 2 0 LGPL SW Component Name License URL gLibc LGPL 2 0 Inetutils LGPL 3 0 neon 0 29 6 LGPL 2 0 http www webdav org neon The Manual and test suite are GPL GNU GENERAL PUBLIC LICENSE Version 2 June 1991 Copyright C 1989 1991 Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public License is intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This General Public License applies to most of the Free Software Foundation s software and to any other program whose authors commit to using it Some other Free Software Founda
175. t do not pertain to any part of the Derivative Works in at least one of the following places within a NOTICE text file distributed as part of the Derivative Works within the Source form or documentation if provided along with the Derivative Works or within a display generated by the Derivative Works if and wherever such third party notices normally appear The contents of the NOTICE file are for informational purposes only and do not modify the License You may add Your own attribution notices within Derivative Works that You distribute alongside or as an addendum to the NOTICE text from the Work provided that such additional attribution notices cannot be construed as modifying the License You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use reproduction or distribution of Your modifications or for any such Derivative Works as a whole provided Your use reproduction and distribution of the Work otherwise complies with the conditions stated in this License 5 Submission of Contributions Unless You explicitly state otherwise any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License without any additional terms or conditions Notwithstanding the above nothing herein shall supersede or modify the terms of any separate license agreement you may
176. t three types upper lower case alphabets numbers and special characters H ini If the password is 10 to 15 letters long then it should be a combination of at El m For a new password with 8 to 9 digits least two types upper lower case alphabets numbers and special characters 1 i User name should be different from password you must use at least 3 of the following The following special characters are available for use 1 _ 3 uppercase lowercase letters numbers Don t use 4 or more characters consecutive together examples 1234 abcd and special characters For a password Don t use 4 or more characters repeated examples 1111 aaaa with 10 to 15 digits you must use at least 2 types of those mentioned Special characters that are allowed _ If f For higher security you are not recommended to repeat the same characters or consecutive keyboard inputs for your passwords f you lost your password you can press the RESET button to initialize the product So don t lose your password by using a memo pad or memorizing it LOGIN Whenever you access the camera the login window appears Enter the User ID and password to access the camera 1 Enter admin in the lt User name gt arene input box The server 192 168 1 100 at iPolis requires a username and password The administrator ID admin is fixed B E and can not be cha
177. taining letters A Z numbers 0 9 gt To use the DDNS service the product ID entered above must be identical to the product ID of your product e g SNC 570 listed in the product setting page To register multiple products please enter their Product ID separately gt You may not able to change the initial product ID name PRODUCT ID http www samsungipolis com CLASSIFICATION gt Choose product category MODEL NUMBER mens Ms Choose product model gt Determine the location to install the system or camera gt Designate the installation location within 10 alphabet letters DESCRIPTION gt Describe product for management purpose English _97 N3149S dNLAS Setup screen To connect to the Samsung DDNS in camera setup 1 From the DDNS setup page set lt DDNS gt to lt Samsung DDNS gt 2 Provide the lt Product ID gt that you registered product ID with the DDNS site 3 Click Apply EZA When the connection is successfully made you will see the message of lt Success gt on the screen Configuring public DDNS in Camera Settings 1 Open the DDNS settings page and select lt Public DDNS gt for lt DDNS gt 2 Enter the corresponding site s host name user name and password 3 Click Apply TM button If the connection properly establishes lt Success gt appears 4 When done click Apply 14 To use DDNS service properly both DDNS setu
178. ter refer to the product s documentation For more information about port forwarding of the broadband router refer to Port Range Forward Port Mapping Setup Page 59 52_ network connection and setup BUTTONS USED IN IP INSTALLER 2 3 4 5 6 7 IP CAMERA 4 NVR No T Device Name les f Mods MAC Address IP Address URL SND L5083A N A Static 00 16 6C F5 DD 41 192 168 1 100 IPv4 http 192 168 1 100 index htm Scan Item Iv IPv4 M IPv6 i Li ao ao 42 13 Item Description dN13S ANY NOILOANNOO MYOMLAN Model name of the connected camera Device Name Click the column to sort the list by model name However search will be stopped if clicked during the search Alias This function is not currently implemented Displays either lt Static gt lt Dynamic gt or lt PPPoE gt for the current network 09 N Mode connection status Ethernet address for the connected camera Hea Click the column to sort the list by Ethernet address However search will be stopped if clicked during the search IP address IP Address Click the column to sort the list by IP address However search will be stopped if clicked during the search Network setting for the camera Protocol The factory default is IPv4 Cameras with the IPv6 setting will be displayed IPv6 o e English _53 network connection and setup Item
179. text data using digital devices Selecting a memory card that s suitable for you Your camera supports Micro SD SDHC memory cards You may however experience compatibility issues depending on the model and make of the memory card For your camera we recommend you use a memory card from the following manufacturers Micro SD SDHC memory Card Sandisk Transcend Memory cards of 4GB 32GB is recommended for using with this camera Playback performance can be affected depending on the speed of memory card so use the high speed memory card Memory cards with a specification of Class 10 UHS 1 or higher are recommended Memory Card Components Contacts Micro SD SDHC English _43 NOILOANNODO 8 NOILLVTIVLSNI Installation amp connection CONNECTING WITH OTHER DEVICE EN aaah lj HHI PoE Device lt SNO L5083R gt 44_ installation amp connection lt SNV L5083R gt Ethernet Connection Connect the Ethernet cable to the local network or to the Internet English _45 NOILOANNODO 8 NOLLVTIVLSNI Installation amp connection Powering and networking Connect the PoE device and camera s PoE connectors Connect to a PoE Power over Ethernet enabled router s PoE connector Use PoE that is compliant with the IEEE802 3af protocols m f you want to connect an external device you must turn off the external device before proce
180. the Micro SD memory card a f set to Always the activation time cannot be changed e Only scheduled time Records only on the specified time of the specified day of week e Clear EJ Reset all settings 7 When done click Apply EZA If you want to record in your NAS 1 Set the saving operation and basic recording m Auto deletion is supported only if your NAS meets the recommended specifications 2 Enter the information registered in your NAS e P address Unique IP address assigned to the NAS e ID An ID registered in the NAS e Password Password registered in the NAS e Default folder Designate the NAS HR user folder to save data in Eee English _109 N3149S dN1 S Setup screen 3 Click the Test button to see if you can successfully connect to the NAS ay m f the success message is displayed it means that you can successfully save data in the NAS m f the fail message is displayed check the following Confirm that the IP address of the NAS is valid Confirm that the ID password of the NAS is valid Confirm that you can access the folder designated as the default folder using the ID of the NAS Confirm that the NAS SMB CIFS items are unchecked Confirm that the NAS IP address and the camera IP address are in the same format ex The NAS amp camera subnet mask initial value is 255 255 255 0 If the IP address is 192 168 20 32 then the NAS IP address sh
181. the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation Moreover your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you ofthe violation by some reasonable means this is the first time you have received notice of violation of this License for any work from that copyright holder and you cure the violation prior to 30 days after your receipt of the notice Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License If your rights have been terminated and not permanently reinstated you do not qualify to receive new licenses for the same material under section 10 9 Acceptance Not Required for Having Copies You are not required to accept this License in order to receive or run a copy of the Program Ancillary propagation of a covered work occurring solely as a consequence of using peer to peer transmission to receive a copy likewise does not require acceptance However nothing other than this License grants you permission to propagate or modify any covered work These actions infringe copyright if you do not accept this License Therefore by modifying or propagating a covered work you indicate your acceptance of this License to do so 10 Automatic Licensing of Downstream Recipients Each time you convey a covered work the r
182. the lens in a desired direction by referring to the Adjusting the monitoring direction for the camera section page 39 i i 1 i 1 i i i i i A El We recommend you not to touch the lens as the camera lens has been properly focused in the final process of manufacturing If so the lens may be out of focus or stained by alien substances 5 Please connect the inner cover to the main body 6 While grabbing the bottom side of the camera with your hand please grab and push its cover with the other hand to align the two arrow signs as shown in the figure K To assemble the dome cover make the arrows match each other and press the cover firmly Turning the dome while assembling may cause diffuse reflection and partial rotation of lens may change the scope of shooting 28_ installation amp connection INSTALLATION SNO L5083R m m This camera is waterproof and in compliance with the IP66 spec but the jack connected to the external cable is not You are recommended to install this product below the edge of eaves to prevent the cable from being externally exposed Precautions before installation Ensure you read out the following instructions before installing the camera e t must be installed on the area ceiling or wall that can withstand 5 times the weight of the camera including the installation bracket e Stuck in or peeled off cables can cause damage to the product or a fire e For safet
183. therwise or b ownership of more than fifty percent 50 of the outstanding shares or beneficial ownership of such entity 2 Source Code License 2 1 The Initial Developer Grant The Initial Developer hereby grants You a world wide royalty free non exclusive license subject to third party intellectual property claims a under intellectual property rights other than patent or trademark Licensable by Initial Developer to use reproduce modify display perform sublicense and distribute the Original Code or portions thereof with or without Modifications and or as part of a Larger Work and b under Patents Claims infringed by the making using or selling of Original Code to make have made use practice sell and offer for sale and or otherwise dispose of the Original Code or portions thereof c the licenses granted in this Section 2 1 a and b are effective on the date Initial Developer first distributes Original Code under the terms of this License d Notwithstanding Section 2 1 b above no patent license is granted 1 for code that You delete from the Original Code 2 separate from the Original Code or 3 for infringements caused by i the modification of the Original Code or ii the combination of the Original Code with other software or devices 2 2 Contributor Grant Subject to third party intellectual property claims each Contributor hereby grants You a world wide royalty free non exclusive l
184. ticipant under Sections 2 1 or 2 2 shall be taken into account in determining the amount or value of any payment or license 8 4 In the event of termination under Sections 8 1 or 8 2 above all end user license agreements excluding distributors and resellers which have been validly granted by You or any distributor hereunder prior to termination shall survive termination 9 LIMITATION OF LIABILITY UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY WHETHER TORT INCLUDING NEGLIGENCE CONTRACT OR OTHERWISE SHALL YOU THE INITIAL DEVELOPER ANY OTHER CONTRIBUTOR OR ANY DISTRIBUTOR OF COVERED CODE OR ANY SUPPLIER OF ANY OF SUCH PARTIES BE LIABLE TO ANY PERSON FOR ANY INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF GOODWILL WORK STOPPAGE COMPUTER FAILURE OR MALFUNCTION OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTY S NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU 10 U S GOVERNMENT END USERS The Covered Code is a commercial item as that term is defined in 48 C FR 2 101 Oct 1
185. ting the distribution 4 In the event that T Engine Forum accepts the request mentioned in Article 6 2 T Engine Forum shall register and distribute the Ported Source Code as the Source Code for T Kernel Provided however that the Ported Source Code may be treated in the same way as the Modified Source Code until the time of registration hereunder 5 The provision set forth in Article 3 shall apply to the Ported Source Code registered in accordance with this Article Article 7 Use for Other Purpose 1 Any use of the Source Code the Modified Source Code or the Ported Source Code other than those stipulated in Articles 4 5 and 6 shall be subject to the prior approval of T Engine Forum Article 8 Limited Warranty 1 T Engine Forum and the copyright holder of the Source Code warrant that the Source Code does not infringe third party s copyrights Provided however that T Engine Forum and the copyright holder of the Source Code make no warranty as to the Hardware dependent Part and or Compiler dependent Part set forth in Article 6 2 in the Ported Source Code by any third party 2 Neither T Engine Forum nor the copyright holder of the Source Code warrants that the Source Code will fit for any particular purpose of the Source Code User 3 Neither T Engine Forum nor the copyright holder of the Source Code warrants that the Source Code does not infringe any third party s industrial property rights In no event shall T Eng
186. tion sensitivity The higher the sensitivity detects the minutest tampering attempts 5 Specify the lt Activation time gt e Always To continuously check whether or not an event has occurred If an event is detected a preset operation is executed a If set to lt Always gt the activation time cannot be changed e Only scheduled time To check whether or not an event has occurred at a specified time on a specified date If an event is detected a preset operation is executed e Clear KI Reset all settings e Hour Drag your mouse at Activation Time and set the time by hours aways O Only scheduled time e Minute Click an area in Activation Time and set the time by minutes Minutes Hour English _115 N3149S dNLAS Setup screen 6 Configure the operations to be executed when an event is detected e FIP To set whether or not to send FTP when an event is detected Refer to FTP E mail for more details page 105 e E mail To set whether or not to execute transmission when an event is detected Refer to FTP E mail for more details page 105 e Record To set whether or not to record to a NAS or Micro SD card when an event is detected Set lt Device gt to lt On gt in lt Storage gt page 107 7 When done click Apply K The default tampering detection function may not work properly in the following cases Under circumstance
187. tion software is covered by the GNU Lesser General Public License instead You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights These restrictions translate to certain responsibilities for you if you distribute copies of the software or if you modify it For example if you distribute copies of such a program whether gratis or for a fee you must give the recipients all the rights that you have You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights We protect your rights with two steps 1 copyright the software and 2 offer you this license which gives you legal permission to copy distribute and or modify the software Also for each author s protection and ours we want to make certain that everyone understands that there is no warranty for this free software If the software is modified by someone else and passed on we want its rec
188. to Port Range Forward Port Mapping Setup page 59 e Public DDNS Select one of provided public DDNS servers when you use a public DDNS server Service Select desired public DDNS service server Host name Enter the name of the host that is registered with the DDNS server User name Enter the user name for the DDNS service Password Enter the password for the DDNS service 5 When dore click Apply EZH En f selected lt Quick connect be sure to select Samsung DDNS service 96_ setup screen Registering with DDNS To register your product with the Samsung DDNS 1 2 3 Visit the iPOLIS web site www samsungipolis com and sign in with a registered account From the top menu bar select lt DDNS SERVICE gt lt MY DDNS gt Click PRODUCT REGISTRATION Enter the product ID You must perform the duplicate check for the ID that you entered Select a lt CLASSIFICATION gt and specify the lt MODEL NUMBER gt Specify the product location with a description if necessary Click REGISTRATION The product will be added to the product list that you can check SIGN UP CJ HOME gt Membership gt SIGN UP Welcome to the IPOLIS website We offer various services for users of Samsung iPOLIS network products To use the services please register first Terms of Service Terms of Service and Membership Agreement Chapter 1 Parties and Recitals 1 1 Purpose of Terms of
189. tribution terms of the Free Software Foundation principally that you must include source code if you redistribute it See the file ansi2knr c for full details However since ansi2knr c is not needed as part of any program generated from the JG code this does not limit you more than the foregoing paragraphs do The Unix configuration script configure was produced with GNU Autoconf It is copyright by the Free Software Foundation but is freely distributable The same holds for its supporting scripts config guess config sub ltconfig main sh Another support script install sh is copyright by M I T but is also freely distributable It appears that the arithmetic coding option of the JPEG spec is covered by patents owned by IBM AT amp T and Mitsubishi Hence arithmetic coding cannot legally be used without obtaining one or more licenses For this reason support for arithmetic coding has been removed from the free JPEG software Since arithmetic coding provides only a marginal gain over the unpatented Huffman mode it is unlikely that very many implementations will support it So far as we are aware there are no patent restrictions on the remaining code The IJG distribution formerly included code to read and write GIF files To avoid entanglement with the Unisys LZW patent GIF reading support has been removed altogether and the GIF writer has been simplified to produce uncompressed GIFs This technique does not use the LZW
190. ture correction range ex Clear sky sunset Ifthe surrounding of the object is dark lf the focus of the camera directly faces the florescent lighting or if the camera is installed in a place of variable illumination the white balancing operation may be unstable English _91 Setup screen To Set BLC You can specify a desired area on the video manually and set the area to be displayed more clearly 1 Select lt Back light gt 2 Set lt Mode gt to lt BLC gt 3 Set lt BLC level gt You can change the level to adjust the brightness of the monitoring area 4 Set the lt Top Bottom Left Right gt levels to specify the target area m When BLC is set the green box is displayed on the screen for 30 seconds Jo prevent malfunction at the time of BLC setup the vertical space of the BLC area should be over 40 and below 60 while the horizontal space over 30 and below 60 To Set Exposure You can adjust the exposure level of the camera 1 Select lt Exposure gt 2 Select each item and set it properly e Brightness Adjust the screen brightness e Minimum shutter The limit of the longest exposure time Shutter is the mode to set up the range of the sensor exposure time which will specify the upper and lower limits for the electronic shutter movement The framerate may be reduced in the dark condition if Shutter has a lower value than specified in the Sensor mode 50 e Maximum shutter The
191. utable work complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the executable However as a special exception the source code distributed need not include anything that is normally distributed in either source or binary form with the major components compiler Kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable If distribution of executable or object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place counts as distribution of the source code even though third parties are not compelled to copy the source along with the object code 4 You may not copy modify sublicense or distribute the Program except as expressly provided under this License Any attempt otherwise to copy modify sublicense or distribute the Program is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminatedso long as such parties remain in full compliance 5 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Program or its derivative wor
192. uto network setup will be completed English _57 dN13S ANY NOILOANNOO MYOMLAN network connection and setup DYNAMIC IP SETUP Dynamic IP Environment Setup e Example of the Dynamic IP environment Ifa Broadband Router with cameras connected is assigned an IP address by the DHCP server If connecting the camera directly to modem using the DHCP protocols If IPs are assigned by the internal DHCP server via the LAN Checking the Dynamic IP 1 Run the IP Installer on the user s local gt mee seme computer imei sem Cameras allocated with lt Dynamic IP gt address are shown in the list 2 Select a camera from the search result 3 Click the Manual Set button and check the camera s lt Dynamic IP gt Scan 1 Item M Pv fv IPV6 Search address If you uncheck lt DHCP gt you can Manual Setting change IP to lt Static gt EE eD cs te MAC Address 00 09 18 30 44 25 VNP Port 4520 IP Address LE LE L010 JE Subnet Mask PS TS 0 Gateway Password Cancel 58_ network connection and setup PORT RANGE FORWARD PORT MAPPING SETUP If you have installed a Broadband Router with a camera connected you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it Manual Port Range Forwarding 1 From the Setup menu of the Broadband Router select lt Applications amp Gaming gt
193. utor that are necessarily infringed by their Contribution s alone or by combination of their Contribution s with the Work to which such Contribution s was submitted If You institute patent litigation against any entity including a crossclaim or counterclaim in a lawsuit alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed 4 Redistribution You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium with or without modifications and in Source or Object form provided that You meet the following conditions a You must give any other recipients of the Work or Derivative Works a copy of this License and b You must cause any modified files to carry prominent notices stating that You changed the files and c You must retain in the Source form of any Derivative Works that You distribute all copyright patent trademark and attribution notices from the Source form of the Work excluding those notices that do not pertain to any part of the Derivative Works and d If the Work includes a NOTICE text file as part of its distribution then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file excluding those notices tha
194. vailable even if the Electronic Distribution Mechanism is maintained by a third party 3 3 Description of Modifications You must cause all Covered Code to which You contribute to contain a file documenting the changes You made to create that Covered Code and the date of any change You must include a prominent statement that the Modification is derived directly or indirectly from Original Code provided by the Initial Developer and including the name of the Initial Developer in a the Source Code and b in any notice in an Executable version or related documentation in which You describe the origin or ownership of the Covered Code 3 4 Intellectual Property Matters a Third Party Claims If Contributor has knowledge that a license under a third party s intellectual property rights is required to exercise the rights granted by such Contributor under Sections 2 1 or 2 2 Contributor must include a text file with the Source Code distribution titled LEGAL which describes the claim and the party making the claim in sufficient detail that a recipient will know whom to contact If Contributor obtains such knowledge after the Modification is made available as described in Section 3 2 Contributor shall promptly modify the LEGAL file in all copies Contributor makes available thereafter and shall take other steps such as notifying appropriate mailing lists or newsgroups reasonably calculated to inform those who received the Covered Code
195. verwrite to the NAS by setting it to lt Off gt and the available capacity is below 10 it will be saved in the Micro SD card If you are saving data in the NAS you might be unable to save it when you insert a Micro SD memory card used by another camera NAS recommended specs Refer to NAS recommended specs Page 11 If you change the NAS saving while saving data in the NAS it will not be reflected in the system immediately If you remove NAS equipment on your own while saving data or if the network is disconnected NAS saving operation will be terminated abnormally NAS saving allows only one camera to a folder Logging in with another camera is not allowed and the images will not be saved NAS method which is one of the recommended products 1 Access the Synology NAS as an admin In this example the NAS IP Address is DiskStation set to 192 168 20 253 PE AP A A Remember me English _111 N3149S dN1 S Setup screen 2 If you access it as an admin the following screen will be displayed Click the Control Panel Package Center DSM Help 3 Click the lt Shared Folder gt in the file sharing and privilege menu 4 Click the Create button Fil in the following fields Name testDirectory 5 After entering the shared folder Description name ID click the OK button to nee shared folder in My Network Places E Enable Recycle Bin
196. warranty In no event will the authors be held liable for any damages arising from the use of this software Component Name License zlib 1 2 5 zlib libpng Copyright C 1995 2010 Jean loup Gailly and Mark Adler Permission is granted to anyone to use this software for any purpose including commercial applications and to alter it and redistribute it freely subject to the following restrictions 1 The origin of this software must not be misrepresented you must not claim that you wrote the original software If you use this software in a product an acknowledgment in the product documentation would be appreciated but is not required 2 Altered source versions must be plainly marked as such and must not be misrepresented as being the original software URL http zlib net 3 This notice may not be removed or altered from any source distribution Jean loup Gailly Mark Adler jloup gzip org madler alumni caltech edu The data format used by the zlib library is described by RFCs Request for Comments 1950 to 1952 in the files http www ietf org ric rfc1950 txt zlib format fc1951 txt deflate format and rfc1952 txt gzip format This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This
197. word f you set it to lt Manual gt you should specify the IP Subnet mask Gateway DNS 1 amp 2 manually e MAC address Shows the MAC address e P address Displays the current IP address e Subnet mask Displays the lt Subnet mask gt for the set IP e Gateway Displays the lt Gateway gt for the set IP e DNS1 DNS2 Displays the DNS Domain Name Service server address 4 Set the lt IPv6 setup gt Set to lt Use gt to use IPv6 address e Default Use the default IPv6 address e DHCP Display and use the IPv6 address obtained from the DHCP server e Manual Enter IP address and gateway manually and use it N3149S dNLAS is The IP addressing system will be defaulted to DHCP If no DHCP server is found the previous settings will be restored automatically Once completed with editing click Apply to apply changes and the browser exits After a while connect again with the changed IP English _85 Setup screen 5 Type in each item in the Port menu as necessary Neither the port range between 0 and 1023 nor port 3702 is available e HTTP HTTP port used to access the camera via the web browser The default is 80 TCP Setting the HTTP port for Safari and Google Chrome browsers to 65535 is not allowed by security policy e HTTPS In this version the security of the web communication protocol HTTP is strengthened It can be used when you set HTTPS mode in SSL The initial value is set to
198. ximum size of motion to be detected e Minimum size pixel To set the minimum size of detected motions select lt Minimum size pixel gt and then point and drag to the desired size on the screen using the mouse e Maximum size pixel To set the maximum size of detected motions select lt Maximum size pixel gt and then point and drag to the desired size on the screen with your mouse i Motions smaller than the specified minimum size or bigger than the maximum size are not detected To avoid unintended detections caused by great and small noises set minimum maximum motion sizes appropriately in accordance to your environments Note that same motions on the same location can be differently detected in their detection size it is recommended to consider and include the tolerable difference when setting the minimum maximum detection sizes English _119 Setup screen 4 Select lt Area gt tab Sassari You can specify an area on the screen to include or exclude the area to from detection You can specify up to 4 areas e Detection area Sets the entire screen as excluded from detection and adds specified area as motion detection area To click and drag on a video and specify a desired detection area e Non detection area Sets the entire screen as motion detection area and excludes specified area as not to be detected To click and drag on a video and specify a desired non detection ar
199. y purposes keep anyone else away from the installation site And put aside personal belongings from the site just in case Installation 1 Attach the installation template to the selected area and punch 3 holes as shown in the figure 2 Fix the camera in 3 holes by tightening the three tapping screws supplied with the product 3 Connect the cables with the camera port 4 Adjust the direction of the camera with the L wrench supplied with the product m Loosen the bracket screws adjust the camera s position and tighten the screws when you adjust the position of the camera by using a bracket If you adjust the camera s position by force when the screws are tightened the camera may be scratched or out of order English _29 NOILOANNODO 8 NOLLVTIVLSNI Installation amp connection How to connect the RJ45 waterproof cable to a LAN cable 1 Insert it through the arrow direction SN gt 2 lt r 2 Connect the LAN connector male to the cable 3 Connect the RJ45 modular jack female to Men the RJ45 connector male i Please keep each of the parts separated RJ45 modular jack female 4 Assemble by rotating the RJ45 modular jack female and the RJ45 protection cover clockwise Follow the arrow Dk ack cover gasket 5 Assemble by rotating RJ45 protection cover and back cover clockwise Follow the arrow When the back cover is assembled the cable waterproo

NETWORK CAMERA - Surveillance

Contents

Download Pdf Manuals

Related Search

Related Contents