Home

"user manual"

1. WindO I NV2 Ver 4 62 lt Runtime System Software gt Improvements The following improvements have been added gt Improved the project upload process WindO I NV2 only uploaded the related files from the Access folder in the SD card when uploading a project file This is applicable to HG4G 3G HG2G 5F Retained the text color of a unit when entering a number This is applicable to HG4G 3G and HG2G 5F 5S S Bugs Fixed The following problems have been fixed gt gt The Alarm function in the Calendar object does work properly The alarm bit is turned on and off inconsistently This is applicable to HG4G 3G HG2G 5F When controlling the LEY devices by using an offset in script or Reference Device outputs in the expansion module does not work This is applicable to HG4G 3G HG2G 5F If Reference Device is used in Numerical Input Numerical Display or Character Input the Visible Invisible function and object overlap do not work correctly while the Reference Device value is being changed or while the value is invalid This is applicable to HG4G 3G HG2G 5F If Reference Device is used in a Numerical Input or a Numerical Display and the Visible Invisible condition is changed a Device Range Error could occur This is applicable to HG4G 3G and HG2G 5F 5S S In a Numerical Input and a Character Input if the number or character is set to be displayed as an asterisk the number or character is displayed in the Ke
2. Increased the number of blocks for the alarm log setting to a maximum of 128 This is applicable to HG2G S 5S 5F HG3G 4G Increased the amount of alarm log data storage with the data storage area setting for the following models HG2G S 5S 5 520 points HG2G 5F HG3G 4G 11 660 points HG3G 4G video interface equipped models Added a function to adjust the size of a the movie file display to be 2x the display size so it will display correctly on the Video display For instance if the original display size of the movie file is 100x100 and the size of the Video display is 400x400 the original movie file display will get adjusted automatically to 200x200 HG3G 4G video interface equipped models The video display can be setup and connected at anytime There is no restriction as to when it can be connected Added the Slow and the Frame Fwd to the Key Button for the HG3G 4G video interface equipped models When connect a device to Audio IN Audio Out interface of the HG3G 4G use stereo mini plug If the device only supports monaural input output use a monaural to stereo converter Bugs Fixed The following problems have been fixed gt gt gt HG3G 4G models not equipped with the video interface Sounds with a specific sampling frequency does not play normally When monitoring HG2G 5F HG3G 4G with the Remote Control function the O I Type on the Target Information page always shows HG3G The picture may rema
3. type of the registered tag needs to be changed remove the tag and then set it again This is only applicable for Allen Bradley Ethernet IP Logix Native Tag driver 10 Script data may be deleted when Host I F driver is changed if the script has errors In this case remove the error from the script and then change Host I F driver 11 In Message Display and Bar Chart the tag name which contains lower case can not be assigned in the settings of General tab Use the tag name which consists of upper case Communication 1 When the cable remove or turn off MICRO I while communicating with the MICRO I WindO I NV2 will not work 2 The screen monitor can not monitor the value of the Host device set for write only Use Custom Monitor or Batch Monitor if you want to monitor the device 3 Do not write 16bit data or bit data to the 32bit device in Emerson ROC Protocol 4 Donot send more than one command at the same time if Ethernet is selected as User Communicaiton Interface 5 Host Communication Error appears if Modified data only is selected when downloading the project When downloading the project data select All in Download dialog box This is only applicable for Allen Bradley Ethernet IP Logix Native Tag driver 6 When transferring files to and from the Memory Card in O I Link Slave it may fail if WindO I NV2 and O I Link Master are connected via USB cable If file transfer is failed connect the WindO I NV2 and O I Link Master w
4. when you write a value to a host device using SET function it may not be written to the host device lt Application Software gt Improvements The following improvements have been added gt In Modbus RTU Master Modbus RTU Slave and Modbus ASCII Master driver the default settings in Interface Settings are changed Modbus RTU Slave is only supported by HG4G 3G and HG2G 5F gt In Allen Bradley Ethernet IP Logix Native Tag driver the performance is improved in the following operations Open project Open base screen or popup screen gt In Allen Bradley Ethernet IP Logix Native Tag driver the following functions are changed in Tag Editor Delete tag function is added Forbid changing the parameters except tag name of tag which is used in the project gt Cut Copy and Paste functions between Tag Editor and Microsoft Excel are supported Bugs Fixed The following problems have been fixed gt Pictures may not be imported when screen is imported gt When 2 byte character is used in a script WindO I NV2 may crash when Script Editor is closed gt In Allen Bradley Ethernet IP Logix Native Tag driver the following problems may occur A bit of word tag which is set as Report Device in Data Log Settings is deleted The tags which are set in the following settings are deleted Report Device in Calendar Use Reference Device in Destination Device in Word Button Use Reference Device in Des
5. 50 or earlier in Ver 4 00 or later and changing the O I type from HG4F 3F 2F to HG4G 3G HG2G 5F the settings in the Communication Interface tab may not be converted correctly The data under the Data List on Recipe Settings might change values to 0 if the following actions are taken Change O I type Upload a project Change the Access to for the Recipe Settings from the Memory Card to Internal Memory The tag name may be judged as an error in the Script Editor When a project is opened the size of the NV2 Metafile NMF may change A confirmation to save may be displayed when closing the project or when downloading even when the settings for the project and the screens are unchanged If the project is downloaded via Ethernet the system software download may fail If a project for HG4G 3G HG2G 5F created with WindO I NV2 Ver 4 44 is used a button may function though the another button is pressed on the screen of MICRO I When uploading the files from the memory card it may fail If Download Project is performed with the option Modified Data Only and that operation is failed by canceling the operation or occurring a communication error WindO I NV2 returns an error when performing the same operation again WindO I NV2 Ver 4 44 lt Runtime System Software gt Improvements The following improvements have been added gt gt gt Added the recording function to the HG3G 4G video interface equipped models
6. are not correct even if you have changed the Text ID numbers when you import the screens which use the same ID numbers in the editing project lt Pass through Tool gt Ethernet Pass Through feature l Improvement Pass Through via Ethernet between the MICRO I and the PLC Programming Software is now available lt Manual gt Instruction Manual Chapter 26 Pass Through Function Updated the contents of HG2G series supporting Ethernet Pass Through WindO I NV2 Ver 4 01 lt Runtime System Software gt 1 Project Data size Incresed the downloadable project data size for HG1F and HG2F to the same size as Ver 2 3 of runtime WindO I NV2 Ver 3 3 lt Application Software gt 1 Change 0 I Type Fixed that WindO I NV2 showed the error message and froze when you tried to change the O I type after exporting the project from WindCFG 2 Open Project Fixed that WindO I NV2 crashed if you tried to open the project made with the earlier version and clicked Cancel button on the Save As dialog box after converting it 3 Line Fixed that the setting value did not affect to the display image on the editing window correctly if you changed the value by clicking the up arrow or down arrow button of the coordinates or the size spin box on Format tab 4 Text Fixed that the display image in the editing window differed from the MICRO I when Shadow was selected as Style in the Properties dialog box 5 Parts List Fixed that Par
7. error in the trigger conditions of the part objects and Script Editor gt When you use Script Editor to edit scripts WindO I NV2 might crash gt Screen image may not be printed correctly gt Enable Copy Data Log Data for Data Log Function and then specify Device for the end number of the Target Data When you download this project MICRO I displays Device range error gt If atag name is used in the script MICRO I might be reset after downloading the project gt If a picture file is imported to the project file and the extension of picture file is jpeg an error message is displayed after version up conversion when opening a base screen and popup screen WindO I NV2 Ver 4 70 lt Runtime System Software gt Improvements The following improvements have been added gt The following parts can now be displayed without flange and plate This is applicable to HG4G 3G and HG2G 5F Numerical Input Character Input Message Display Message Switching Display Calendar For details refer to the View Tab of each parts of the WindO I NV2 User s manual B1119 12 float32 has been added as Data Type with the following parts This is applicable to HG4G 3G and HG2G 5F Bar Chart Pie Chart Meter For details refer to the General Tab of each parts of the WindO I NV2 User s manual B1119 12 The following functions have been added to CSV output function in Alarm Log function Data Log functio
8. fixed gt gt If Update the display by ENT button is enabled and Display Digits is more than 48 digits Processing Error is displayed when ENT key is pressed in keypad If user communication setting is corresponded to the following conditions received data may not be saved to the device There are more than on receive commands which contain the same start delimiter and end delimiter and the commands also contain Device Registering Constant Character or Registering Constant Hexadecimal When MICRO I receives the data the above commands are active If Windows font is set in Message Display and scroll function is enabled the message can not be displayed properly In numerical display if blinking is stopped while the number is not displayed the number will not be displayed until the number is changed In Picture display the displaying image will remain on the screen if the position or size is changed while trigger condition is not satisfied In the following cases screen image does not appear unless touch panel is released Turn on the power and then keep pressing the touch panel Change Operation Mode and then keep pressing the touch panel This is applicable to the following models HG2G SB22TF HG2G SB22VF HG2G SS22TF HG2G SS22VF HG2G SB21TF HG2G SB21 VF HG2G SS21TF HG2G SS21 VF HG2G 5ST22TF If battery voltage is low initial screen does not appear when turn on the power This is applicable to the f
9. the position of registration text on part objects displayed on the MICRO I differs from the position displayed on the WindOI NV2 lt Downloader gt Improvements The following improvement has been added gt Support Windowss lt USB Autorun Definition File Creation Tool gt Improvements The following improvement has been added gt Support Windowss Wind0O I NV2 Ver 4 75 lt Application Software gt Bugs Fixed The following problem has been fixed gt If Host I F driver is Allen Bradley Ethernet IP Logix Native Tag the following problems might occur WindO I NV2 crashes while editing project A host communication error occur on the Touchscreen lt Downloader gt Bug Fixed The following problem has been fixed gt HG is displayed in the communication message though Downloader communicates to the FT1A Touch Wind0 I NV2 Ver 4 74 lt Runtime System Software gt Improvements The following improvement has been added gt Toshiba Machine Works Hitachi and Mitsubishi FREQROL series PLC are supported This is applicable to HG4G 3G and HG2G 5F Bugs Fixed The following problem has been fixed gt If BCD8 BIN32 BIN32 or float32 is selected as data type in Numerical Display Data Over function does not work This is applicable to HG2G 5S S lt Application Software gt Bugs Fixed The following problem has been fixed gt If allocating a host device to the following configurat
10. 2 Ver 4 52 4 60 What s new in Wind0O I NV2 Version 4 60 lt Runtime System Software gt Improvements The following improvements have been added gt The IP address for hosts configured in Project Settings and Host I F Network can now be modified on the System Menu This is applicable to HG4G 3G HG2G 5F 5S S For details refer to Chapter 33 m Host I F Network on page 33 13 of the WindO I NV2 User s manual B1119 11 The user communication send and receive data size has been expanded to 1500 bytes This is applicable to HG4G 3G HG2G 5F 5S S For details refer to Chapter 3 e Transmission Command Settings Constant on page 3 10 and Chapter 3 e Receive Command Settings Constant on page 3 18 of the WindO I NV2 User s manual B1119 11 5x 6x 7x has been added to the text magnification This is applicable to HG4G 3G HG2G 5F 5S S For details refer to the Magnification setting of each objects of the WindO I NV2 User s manual B1119 11 The execution interval for the remote monitor amp control has been expanded to a maximum of 5000 milliseconds This is applicable to HG4G 3G HG2G 5F For details refer to Chapter 27 Execution Interval on page 27 3 of the WindO I NV2 User s manual B1119 11 EX4R is supported The FC5A D12 is now supported with the PLC program transfer function PLC program from an SDmemory card or USB flash drive inserted on the touchscreen This is applicable to HG4G 3G HG2G 5F The record
11. 7 HG2G 5S 256 color TFT LCD Screen amp HG2G 5F 65K color 8 4 amp 10 4 HG3G w Multimedia and 12 1 HG4G w Multimedia HG3G 4G Series support multimedia Video Input Users are able to display video images on the touchscreen or play back a movie file stored from the SD memory card HG2G 5F HG3G 4G supports letter size paper when using the print function HG2G S 5S does not support the letter size paper Back Space BS key has been added as a key button on a Key Pad when pressing the Numerical Input This is only applicable to HG2G S 5S 5F HG3G 4G The User Communication supports full duplex when using HG2G S Improvements have been made to print from the tray corresponding to the normal paper type in the printer side settings when using the print function of the HG3G Bugs Fixed The following problems have been fixed gt gt When switching an operating mode with the HG3G E g switch from the System Mode to the Run Mode the SD memory card may not be recognized causing operation to stop When using the Remote Control function with the HG3G the screen will continue to be displayed on the web browser even if screen display has been turned off At power on of the HG3G the expansion module may not be recognized In the HG2G 8G two overlapped buttons can not be active even if Enable Two point Push in Project Settings is enabled This problem only happens if one of the buttons is located in a Base Screen and anoth
12. F and HG4G 3G can t copy Data Log to Device Address with Data Log function Data Size is 32 bit The number of the logged Data is greater than the setting of Number of Stored Data for Data Log per Device The setting of End No for Target Data is greater than 1 lt Application Software gt Bugs Fixed The following problems have been fixed gt Script Manager shows an error when using the bit of word device E g LDR0000 0 gt The tag name for the bit of word device cannot be allocated to the property of parts and the respective settings What s new in WindO I NV2 Version 4 50 lt Runtime System Software gt Improvements The following improvements have been added gt Added an advance function to each part with the option to make a part i e button operable or non operable and visible or hidden depending on the device value or condition This is applicable to HG4G 3G HG2G 5F For details refer to the Trigger Condition Tab of each parts of the WindO I NV2 User s manual B1119 9 gt Itis now possible to set the User Communications to the Ethernet Interface This is applicable to HG4G 3G HG2G 5F 5S S For details refer to Chapter 4 3 2 Communication Interface Tab on page 4 32 of the gt WindO I NV2 User s manual B1119 9 Add the HG Special Relay LSM24 This bit is ON while writing to the memory card This is applicable to HG4G 3G HG2G 5F For details refer to Chapter 32 HG Sp
13. G 3G gt When popup screen is closed sound file playback is stopped This is applicable to HG4G 3G lt Application Software gt Improvements The following improvement has been added gt New features and improvements are added from the Runtime System Software upgrade WindO I NV2 Ver 4 71 lt Runtime System Software gt Improvements The following improvement has been added gt Ethernet communication in SIEMENS S7 1200 is now supported This is applicable to HG4G 3G and HG2G 5F 5S S Bugs Fixed The following problems have been fixed gt A user that belongs to Operator Reader group cannot access to the Web Server Function This is applicable to HG4G 3G and HG2G 5F gt Stroke or 7 Segment is selected as Font and None is selected as Image Type in Numerical Input or Numerical Display they don t display proper image This is applicable to HG4G 3G and HG2G 5F gt Iftext on a lamp is located outside of the screen the lamp does no update properly This is applicable to HG4G 3G and HG2G 5F gt If file copy function is performed from USB Autorun Function file copy process may be stopped This is applicable to HG4G 3G and HG2G 5F lt Application Software gt Improvements The following improvement has been added gt New features and improvements are added from the Runtime System Software upgrade Bugs Fixed The following problems have been fixed gt Specific tag name may be judged to be an
14. I NV2 User s manual B1119 12 gt The OFF image in Multi State Lamp can now be set This is applicable to HG4G 3G and HG2G 5F 5S S For details refer to Chapter 9 State Tab on page 9 24 of the WindO I NV2 User s manual B1119 12 gt The following settings for Bar Chart can now be individually specified as Value or Device This is applicable to HG4G 3G and HG2G 5F 5S S Origin Minimum Maximum For details refer to Chapter 11 m Data Format on page 11 4 of the WindO I NV2 User s manual B1119 12 gt The following settings in Line Chart can now be specified as values of device This is applicable to HG4G 3G and HG2G 5F 5S S Minimum Maximum Display Points Scroll Size For details refer to Chapter 11 General Tab on page 11 22 of the WindO I NV2 User s manual B1119 12 gt The size of Password Screen can now be selected This is applicable to HG4G 3G and HG2G 5F For details refer to Chapter 4 m Use Large Password Screen on page 4 31 of the WindO I NV2 User s manual B1119 12 gt PLC Program Transfer Function now supports Ethernet communication This is applicable to HG4G 3G and HG2G 5F gt IDEC SmartAXIS Pro Lite is supported The name of host I F driver was changed due to the addition of applicable models Old OpenNet FC3A MicroSmart FC4A FC5A New OpenNet MicroSmart SmartAXIS Pro Lite RS232C 485 Old Web Server Unit FC3A FC4A FC5A New OpenNet MicroSmart SmartAXIS Pro
15. Lite Ethernet gt Computer link communication for MITSUBISHI MELSEC FX is now supported This is applicable to HG4G 3G and HG2G 5F 5S S gt Support Use function6 instead of function16 function as optional setting if Modbus TCP Client is selected as Host I F Driver This is applicable to HG4G 3G and HG2G 5F 5S S Bugs Fixed The following problems have been fixed gt When Close Popup Screen is set in Goto Screen Command other parts placed on the same screen might not be displayed This is applicable to HG4G 3G and HG2G 5F gt When playing a movie while a sound file is playing LSD72 sound ID of sound file during playback does not become 0 This is applicable to HG4G 3G gt When SD memory card is inserted in MICRO I it may not be possible to download the project to MICRO I with the USB cable This is applicable to HG4G 3G and HG2G 5F gt When a sound file is set for the touch sound the following problem occurs This is applicable to HG4G 3G and HG2G 5F It may not be opened the System Screen while displaying video input Play a movie file and press Stop When a sound file is next played playback of the movie restarts after the sound file finishes playing gt On Numerical Input an error is not displayed even if a value that exceeds Minimum or Maximum is entered This is applicable to HG4G 3G and HG2G 5F 5S S gt With Pen Recorder of Line Chart when the chart to display is one line the chart disappear
16. O I the system screens are closed gt Incorrect color might be displayed on the boundary of different colors in graphic or text This is applicable to HG2G 5F lt Application Software gt Improvements The following improvement has been added gt New features or improvements are added from the Runtime System Software upgrade gt Change the protocol name from Modbus RTU to Modbus RTU Master in Sub Host Communication Bugs Fixed The following problems have been fixed gt When Bit Button Word Button or Goto Screen Button is changed to Multi Button using Change Part type WindO I NV2 freezes gt Ifthe station number of host devices in script is 10 or grater than 10 the station number is changed to different value after uploading the project lt USB Autorun Definition File Creation Tool gt Improvements The following improvement has been added gt Add an option not to clear keep devices WindO I NV2 Ver 4 83 lt Runtime System Software gt Improvements The following improvements have been added gt DM Link Ethernet UDP is supported This is applicable to HG4G 3G and HG2G 5F gt Improve the read process of TP TA CP CA RLEN RPOS This is applicable to HG4G 3G and HG2G 5F Bugs Fixed The following problem has been fixed gt In Calendar object even if Alarm is selected as Calendar Type Date and time of Calender object appears This is applicable to HG4G 3G HG2G 5F lt Applicatio
17. S S gt The following error message may be displayed when converting or saving a project Disk Full Error gt When specifying the bit of a word device with Batch Monitor the 16th bit is not displayed gt When downloading a project that uses Script to MICRO I the device range error may be displayed on MICRO I gt In the following situations you may not be able to import tag names and comments with Tag Editor No space in between device symbols and addresses Addresses are zero suppressed WindO I NV2 Ver 4 66 lt Runtime System Software gt Bugs Fixed The following problems have been fixed gt Sound file playback may be late after the trigger is ON This is applicable to HG4G 3G Multimedia model gt If Video Display has displayed the image from the video input then the value of trigger devices for two or more sound files change from 0 to 1 at the same time the highest priority sound file is not played back and the second one is played back This is applicable to HG4G 3G Multimedia model gt Using the following drivers MICRO I may not display the proper state of Timer contact and Counter contact This is applicable to HG4G 3G and HG2G 5F 5S S MELSEC FX CPU MELSEC FX2N CPU MELSEC FX3UC CPU gt Touch panel might not work while operating the MICRO I This is applicable to HG2G 5ST22VF lt Application Software gt Bugs Fixed The following problem has been fixed gt The project
18. Wind0 I NV2 e p Organizer III Wind0 I NV2 Welcome to Wind0 I NV2 WindO I NV2 is IDEC s screen creation software for the HG1F HG2F HG2S HG3F and HG4F operator interfaces touch screen displays WindO I NV2 is used to create projects or programs that layout display screens for the O Is Using this window based program any of IDEC s touch screens can display information from a PLC process status or can be used to input data with virtual switches or keypads to make changes to a process WindO I NV2 is easy and intuitive Many of the processes are self explanatory and guide you from step to step as you configure the O I The help menus are simple straightforward and are a good resource for getting additional information Creating colorful displays has never been easier With Symbol Factory you have 5000 built in images for your disposal You can also import almost any Bitmap or JPEG file into your project WindO I NV2 highlights Built in Serial and Network Protocols Pass thru function Download upload amp view OI via Ethernet Debug function Over 5000 built in bitmap library Supports Windows Fonts Supports Multiple Languages Supports Scripting Intuitive Drag amp Drop Functionality Flexible Screen Display for Efficient Editing Workspace easy to manage projects amp screens Notes WindO I NV2 There are the following notes when you use WindO I NV2 please following the instruction Supported MICRO I WindO I NV2
19. ance of saving project is improved Bugs Fixed The following problems have been fixed gt If the O I type is changed from HG4G 3G HG2G 5F to HG2G 5S S and the project contains Recipe Settings the following problems occur WindO I NV2 crashes Recipe data is corrupted gt If atag name is set to a device the device is not displayed on Device Address Settings This is applicable to HG4G 3G and HG2G 5F gt Paste function for Tag Name Comment may not work on Tag Editor lt Downloader gt Improvements The following improvement has been added gt User account is supported gt Windows 8 1 is supported lt USB Autorun Definition File Creation Tool gt Improvements The following improvement has been added gt Windows 8 1 is supported lt Pass Through Tool gt Improvements The following improvement has been added gt Windows 8 1 is supported WindO I NV2 Ver 4 91 lt Runtime System Software gt Improvements The following improvement has been added gt In Allen Bradley Ethernet IP Logix Native Tag driver the communication speed is improved when accessing data type DINT or REAL This is applicable to HG4G 3G HG2G 5F Bugs Fixed The following problems have been fixed gt In Numerical Input Numerical Display or Calendar if None is selected as Image Type a part of the drawing remains when the numerical value is changed This is applicable to HG4G 3G and HG2G 5F gt In Script
20. ar when projects saved with Ver 4 50 or Ver 4 51 are uploaded with Ver 4 60 This is applicable to HG4G 3G HG2G 5F 5S S gt This is applicable to a communication driver Allen Bradley Ethernet IP Logix Native Tag If a project is downloaded after deleting the parts configured with the host device a host communicaiton error may occur on the Touchscreen gt Ifa project is downloaded with text registered in Text Manager as the Registration Text for a Multi State Lamp it may not be displayed on the MICRO I This is applicable to HG4G 3G HG2G 5F If scripts are configured that use the ASCIIZDEC STRSTR or STRLEN functions in projects saved with versions before 4 44 NG may be displayed in Script Manager when those projects are opened with version 4 50 and later but before Ver 4 60 The Disk is full error might be displayed if projects saved with versions before 4 44 were later opened in version 4 50 to 4 60 If a project created as 1 N Communication under Connection in the host I F driver settings is changed to 1 1 Communication the values of devices configured with a station number other than 0 can no longer be read or written If the O I type is changed the Alarm Log Display data becomes invalid and when this project is downloaded the MICRO I resets This is applicable to HG4G 3G HG2G 5F If the O I type is changed to HG4G 3G HG2G 5F with project data uploaded from HG1F 2F 2S 3F 4F the picture data may disappear WindO I NV
21. condition depends on the environment of PC such as the number of the running application software at the same time 3 Wedo not guarantee to launch 2 WindO I NV2 at the same time though you can edit while referring the opening project on the other 4 There are the following notes when you use NV2 Metafile When the NV2 Metafile consisted with outline which the line width is or bigger than 2 dot is set to Button Pilot Lamp Multi State Lamp Picture Display the outline is not updated even if the images such as OFF ON are changed or the image is disappeared To solve this note set the outline which the line width is 1 to NV2 Metafile When Paint object is used in the NV2 Metafile the image is sometimes changed after resizing Picture or part object which NV2 Meta file is used o1 Export of the library screen is not supported in the case of the following O I Type gt HG3G HG4G HG3G 4G Multimedia HG2G 5FT 6 In Tag Editor blank cell can not be copied amp pasted 7 In Data Log Setting a selected device address may be deleted if more than one channels are selected In this case configure the device address for each channel 8 Host Communication Error appears if invalid tag name is set If the invalid tag name is directly entered it may not be checked This is only applicable for Allen Bradley Ethernet IP Logix Native Tag driver 9 Host Communication Error appears if the data type of registered tag is changed If data
22. d The following problems have been fixed gt When screen switching occurs during communication with the O I Link O I Link communication errors may occur or the MICRO I may reset However this problem will occur with the HG1F 2F 3F 4F only when using 1 N communication gt The following are applicable when using the HG3G Series Touchscreen When parts are placed in layers on the screen the layered parts will not be properly displayed The touchscreen will reset depending on the size of the Windows Font lt Application Software gt Bugs Fixed The following problems have been fixed gt After deleting a picture from the Picture Manager that was registered to a project and then importing a new picture file caused the screen to display an incorrect picture gt When registering multiple pictures in an HG3G project that was created in Ver 4 2 opening or uploading the project in Ver 4 30 displays an error message that states Insufficient memory Wind0 I NV2 Ver 4 30 lt Runtime System Software gt Improvements The following improvements have been added HG3G gt v v v v gt gt Remote Monitor and Control function Using a web browser on your PC PDA or smart phone you can remotely monitor amp control the HG3G Series amp PLC for easy maintenance test or troubleshoot Be able to mount in Portrait Vertical mode The line chart displays time on the x axis at the cursor position when
23. ded to 32 from 16 This is applicable to HG4G 3G and HG2G 5F Support STRING device in MicroLogix SLC500 Full Duplex and Ethernet IP driver This is applicable to HG4G 3G and HG2G 5F 5S S Support STRING data type in Ethernet IP Native Tag driver This is applicable to HG4G 3G and HG2G 5F Improve the communication speed in MELSEC FX CPU MELSEC FX2N CPU and MELSEC FX3UC CPU driver This is applicable to HG4G 3G and HG2G 5F 5S S Change the driver name from SIEMENS S7 Ethernet to S7 1200 Ethernet This is applicable to HG4G 3G and HG2G 5F 5S S Change the driver name from MODBUS RTU to Modbus RTU Master Change the driver name from MODBUS ASCII to Modbus ASCII Master This is applicable to HG4G 3G and HG2G 5F 5S S Improve processing speed This is applicable to HG4G 3G and HG2G 5F Improve the processing speed when Lamp is blinking This is applicable to HG4G 3G and HG2G 5F Improve the response speed of touch panel This improvement is active if the HG3G 4G and HG2G 5FT are the following lot number or newer and WindO I NV2 software version is 4 74 or newer HG2G 5FT 73X23 00004 HG G JT22TF 73Y14 00001 HG G JT22MF 73919 00055 Lot number is described by the following rule ABCDD EEEEE BCDD is manufactered date B Year 0 9 is assigned to 2010 2019 C Month 1 9 X Z are assigned to January December DD Day EEEEE Serial Number Bugs Fixed The following problems have been
24. ecial Relay LSM on page 32 3 of the WindO I NV2 User s manual B1119 9 Bugs Fixed The following problems have been fixed gt gt The display update speed becomes slower when the Picture is used on the screen This is applicable to HG4G 3G HG2G 5F A specific size of Bitmap is not displayed correctly This is applicable to HG4G 3G HG2G 5F If used with screens overlapping Device range error may not be displayed If the Numerical or Character Input is protected by using the Security Function you can still set a value to it When you moved the focus to it by using the Focus is moved by ENT button setting this problem occurs Text within the text display area frame on parts in WindO I NV2 may not be displayed on the MICRO I This is applicable to HG4G 3G HG2G 5F The message in the Result window at times doesn t appear after copying the files from SD card to USB flash drive using the Key Button to transfer data After copying the files by using the Key Button labeled Copy Files under Data Transfer on either Memory Card or USB flash Drive the folder icon is displayed without the folder name This is applicabl eto HG4G 3G HG2G 5F This is shown on the PC Data cannot be uploaded from a Memory Card inserted in the MICRO I set to O I Link Slave This is applicable to HG4G 3G HG2G 5F The Web Server function cannot be used from Internet Explorer with certain PCs This is applicable to HG4G 3G HG2G 5F lt Host I F Dri
25. ects without clearing the HG Keep Register LKR and HG Keep Relay LK has been added gt A command line that downloads projects without downloading picture or sound data to the memory card has been added Bug Fixed The following problem has been fixed gt Projects cannot be downloaded to the HG2G S lt USB Autorun Definition File Creation Tool gt Added the USB Autorun Definition File Creation Tool which generates USB Autorun definition file that are required when using the USB Autorun function Go to Start menu click Automation Organizer WindO I NV2 and then click USB Autorun Definition File Creation Tool lt Manual gt gt Changed the name of Instruction Manual to User s Manual gt United the Hardware Manual to the User s Manual WindO I NV2 Ver 4 32 lt Runtime System Software gt Bugs Fixed The following problems have been fixed gt The project will fail to download if more than 4MB of project already existed in the HG3G gt The HG8G can not be controlled by the remote control function when back light is OFF gt If Disable Switch option is enabled in Project Settings the HG3G should not be controlled by touch panel and remote control function but it can be controlled from the remote control function gt The button will not blink if Device is selected as the View Switching Method and the Blink mode is enabled WindO I NV2 Ver 4 31 lt Runtime System Software gt Bugs Fixe
26. er 4 64 lt Runtime System Software gt Improvements The following improvement has been added gt The maximum number of Read source Devices on a Popup Screen is expanded to 256 from 64 This is applicable to HG4G 3G and HG2G 5F 5S S lt Application Software gt Improvements The following improvement has been added gt New features or improvements are added from the Runtime System Software upgrade Bugs Fixed The following problem has been fixed gt This is applicable to a communication driver Allen Bradley Ethernet IP Logix Native Tag If a project is downloaded after editing a host communicaiton error may occur on the Touchscreen WindO I NV2 Ver 4 63 lt Runtime System Software gt Bugs Fixed The following problem has been fixed gt If Windows font is used as unit in Numerical Display and Numerical Input a part of these frange may be filled with the plate color This is applicable to HG2G 5S S lt Application Software gt Bugs Fixed The following problems have been fixed gt Project Settings dialog box can get an error and cannot be closed if projects saved with version before 4 44 are opened with Ver 4 62 This is applicable to HG4G 3G and HG2G 5F gt The Property dialog box of the part objects can get an error and cannot be closed if the Trigger Condition is enabled and the Trigger Type is While satisfying the condition or Satisfy the condition This is applicable to HG4F 3F 2F 2S 1F
27. er button is located in the Popup Screen In addition Superimpose is set as Screen Effects in the Popup Screen If the DM Link communication is used with the HG3G the HG3G may stop running when it sends a reply for a request command and an Event Transmission at the same instant lt Host I F Driver gt Additional supported Drivers HG3G v v v v v v v PLC 5 Half Duplex SLC 500 Half Duplex S7 300 3964 R RK512 Power Mate MODEL D Series 16i MP920 RTU MICRO3 MICRO3C Ethernet IP Logix Native Tag Bugs Fixed The following problems have been fixed gt When selecting MODBUS TCP Server with the HG2G 3G the communication is lost if 3 or more clients are connected In addition Communication is lost if cable is connected and disconnected repeatedly When Koyo DirectLogic DL205 405 is selected as Host I F dirver MICRO I can not communicate to the PLC lt Application Software gt Improvements The following improvements have been added gt Supports 5 7 HG2G 5S 256 color TFT LCD Screen amp HG2G 5F 65K color 8 4 amp 10 4 HG3G w Multimedia and 12 1 HG4G w Multimedia New features or improvements are added from the Runtime System Software upgrade A function that automatically converts the size of parts and draw objects to match the screen size when converting the O I type has been added You can see this option on the Set Conversion Option dialog box after selecting Change O I type A functio
28. ew password This is applicable to HG4G 3G HG2G 5F Bugs Fixed The following problems have been fixed gt When the Start Time in the Project Settings dialog box is configured you can not monitor the MICRO I properly after clicking the Start Monitor in the Monitors group on the Online tab This is applicable to HG4G 3G HG S 5S 5F Remote Control and Monitoring and Port No settings in the Web Server tab on the Project Settings dialog box does not work properly This is applicable to HG4G 3G HG2G 5F In the System Detail Information page on the Web browser the IP Netmask Gateway and MAC Addresses are displayed incorrectly This is applicable to HG4G 3G HG2G 5F The limitation of the read device addresses per Base Screen is 256 If the total read device addresses ona_ Base Screen is 256 MICRO I may display the Device Range Error This is applicable to HG2G S 5S If you repeatedly press the touchscreen for 3 seconds you can go to the system mode without the password confirmation even though the touchscreen s project is password protected This is applicable to HG4G 3G HG2G 5F WindO I NV2 Ver 4 50 4 51 What s new in WindO I NV2 Version 4 51 lt Runtime System Software gt Bugs Fixed The following problems have been fixed gt HG4F EX4R HG3F 2F 2S 1F may reset if some data is written to Device Address with Downloader while occuring Host Communication error gt When the following conditions are satisfied HG2G 5
29. file size might bloat while editing a project and then it takes much time to open it WindO I NV2 Ver 4 65 lt Runtime System Software gt Improvements The following improvements have been added gt In MELSEC FX2N CPU and MELSEC FX3UC CPU drivers Higher communication speed than 9600bps is supported The maximum communicating speed is depends on the CPU unit This is applicable to HG4G 3G and HG2G 5F 5S S The maximum number of Read source Devices on a Popup Screen is expanded to 256 from 64 This is applicable to HG4G 3G and HG2G 5F 5S S Compatible functions for old products are supported This function can be configured in Compatibility tab on Project Settings dialog box This is applicable to HG4G 3G and HG2G 5F 5S S HG1F 2F 3F 4F has already supported Bugs Fixed The following problems have been fixed gt gt gt Sound file cannot be played after Video Input is displayed This is applicable to HG4G 3G If the project file in the MICRO I is more than 6Mbyte the project download via Ethernet may be failed This is applicable to HG4G 3G and HG2G 5F If Host devices are used in both Sound function and the following functions or settings and Monitor function is used in WindO I NV2 MICRO I may be reset This is applicable to HG4G 3G and HG2G 5F System Area Global Script Disable Switch setting on the System tab in the Project Settings dialog box Settings on the Options tab in the User Acc
30. h has Windows font setting at a time the screen which contains those part objects might not be able to be opened Wind0 I NV2 Ver 4 84 lt Runtime System Software gt Improvements The following improvements have been added gt The maximum number of Text Group is expanded to 32 This is applicable to HG4G 3G and HG2G 5F 5S S gt Support float32 data type in Recipe Function This is applicable to HG4G 3G and HG2G 5F 5S S gt Support Target Setting Function in DM Link Ethernet UDP This is applicable to HG4G 3G and HG2G 5F gt In USB Autorun Function add an option not to clear keep devices LK LKR in downloading project file function This is applicable to HG4G 3G and HG2G 5F gt IP Address Subnet mask Default gateway and IP address of external device can be changed with Internal MICRO I Devices This is applicable to HG4G 3G and HG2G 5F 5S S gt Improve the response of operation while writing CSV file to the SD Card This is applicable to HG4G 3G and HG2G 5F Bugs Fixed The following problems have been fixed gt Update the connection diagram for Mitsubishi FX1 FX2 and FX2C Delete FX 2PIF from the system configuration gt The popup screens may not be opened and closed if Use Reference Device is enabled gt In Emerson ROC protocol if TLP number is bigger than 127 Communication Error occurs gt If Display error message in Project Settings is disabled and PLC is not connected to MICR
31. her than Normal size under Display Properties in Windows then WindOI NV2 would crash after a new project was created or opened Unusable options would display for the Serial Interface of the host communication protocol depending on the host I F driver When opening a project created in an old version and converting data to the new version all host device settings used in the project would reset if the new project name contained two or more spaces or a period gt Ifa script was set for a multi button or a multi command and the host device set in the script would not set for any other parts on the same screen then the device value could not be read correctly by the MICRO I gt When setting a data log a message saying that the data storage area was insufficient would be displayed even if there actually was sufficient free space lt Downloader gt Improvement The following improvement has been added gt The HG3G series is now supported lt Pass Through Tool gt Improvement The following improvement has been added gt Now supports pass through between the USB port of HG3G and a MELSEC FX Series PLC lt Manual gt Communication Manual Removed discontinued IDEC PLCs which are FA 3S FA 2J MICRO3 and MICRO3C WindO I NV2 Ver 4 24 lt Runtime System Software gt Bugs Fixed The following problems have been fixed gt Modified the touch panel driver to fix that the HG1F touch panels didn t alway
32. ime System Software gt Bugs Fixed The following problems have been fixed gt Inthe HG2G S 5S 5F and HG3G 4G if the following host I F driver is selected in the project MICRO I may stop operation when you cycle power or download upload a project file Modicon Modbus RTU Modicon Modbus ASCII SIEMENS S7 MPI SIEMENS 7 200 PPI Yasukawa MP920 RTU gt Inthe HG2G S 5S 5F and HG3G 4G downloading uploading a project via Ethernet may be failed and then you can not download upload a project In addition Remote control function may not be available gt Inthe HG2G 5F and HG3G 4G MICRO may not recognize SD Memory Card lt Host I F Driver gt Bugs Fixed The following problems have been fixed gt PLC device value may not be updated if using Koyo DirectLogic DL205 405 driver gt If Keyence KV 3000 5000 driver is selected in the project the device value of Link Relay B Work Relay VB and Link Resistor W may not be referenced to the PLC device value In addition If you write a value to those devices it may not be written to the PLC lt Application Software gt Bugs Fixed The following problem has been fixed gt In the Individual Settings dialog box of the Recipe Settings on the Data tab 0 is always set to the Data column in the Data List if the Memory Card is selected from the Access to WindO I NV2 Ver 4 41 lt Host I F Driver gt Additional supported Drivers gt MITSUBISHI FX3U Ethe
33. in displayed when a movie finishes playing This is applicable to HG3G 4G with video interface only The File Screen for movie data may not update This is applicable to HG3G 4G with video interface only If the number of alarms that occurred on HG S 5S 5F HG3G 4G exceeds the Number of Stored Data for Alarm Log HG S 5S 5F HG3G 4G_ may reset or stop displaying data on the Alarm List Display and Alarm Log Display lt Host I F Driver gt Expanded Drivers gt Extended the range of usable devices for Allen Bradley PLC 5 Half Duplex Applicable for HG2G S 5S 5F and HG3G 4G Bugs Fixed The following problems have been fixed gt If Ignore communication errors and continue operation is selected as one of the host I F drivers below the value for the host devices may not be set in parts and settings OpenNet FC3A MicroSmart FC4A FC5A DirectLogic DL205 405 Modbus RTU MODBUS TCP Client Web Server Unit FC3A FC4A FC5A Ethernet IP MELSEC Q QnA Ethernet Logix DF1 Full Duplex DirectLogic Ethernet SYSMAC CS1 CJ Ethernet Modbus ASCII KV Ethernet Ethernet IP Native Tag lt Application Software gt Improvements The following improvement has been added gt New features or improvements are added from the Runtime System Software upgrade Bugs Fixed The following problems have been fixed gt After the project is downloaded to the MICRO I with the Zooming Conversion selected and Change O I Ty
34. in manual mode Data logs support 32 bit data BIN 32 BIN 32 BCD 8 or float 32 Pictures can be set as a background image of the following parts Numerical Input Numerical Display Character Input Message Display Message Switching Display Calendar Meter PictBridge protocol for USB printers is now supported The USB printer can print screen images and alarm log data Brightness can be adjusted in 48 levels Bugs Fixed The following problems have been fixed HG3G gt gt The screen title was missing when a Picture Display was placed at the top of a popup screen Picture Display reference devices would reset when they were outside the specified range Meter needles were not displayed properly Text would not display correctly when Windows fonts were used for the Y axis label on a Line Chart Plotting would stop when the scroll function was used if the number of display points and the scroll step size in a Line Chart were similar lt Host I F Driver gt Additional supported Drivers HG3G v v v v v v v MODBUS TCP Server Koyo DirectLogic Ethernet GE Fanuc Automation Series 90 SNP X Keyence KV Ethernet LS Industrial Systems MASTER K VIGOR VB VH YOKOGAWA FA M3 v v v v v JTEKT TOYOPUC FUJI FREX PC CPU FUJI FREX PC LINK FUJI MICREX F Toshiba PROSEC T Bugs Fixed The following problems have been fixed gt gt gt Timer and counter settings could not be read correctl
35. ing function has been improved This is applicable to HG4G 3G For details refer to Chapter 22 e Record tab on page 22 14 of the WindO I NV2 User s manual B1119 11 Bugs Fixed The following problems have been fixed gt gt gt Calendar data may have invalid values when using the remote monitoring and remote control functions or cyclic scripts This is applicable to HG4G 3G HG2G 5F If a shadow style is selected as the drawing object the background color would not display This is applicable to HG4G 3G HG2G 5F If a project with Ignore communication errors and continue operation is selected and downloaded to an O I link slave then the Network Offline is displayed and the operation would not work This is applicable to HG4G 3G HG2G 5F 5S S If a project with Ignore communication errors and continue operation is selected amp downloaded to an O I link master the O I link slave does not recover from Network Offline if a host communication error occurs This is applicable to HG4G 3G HG2G 5F 5S S lt Host I F Driver gt Additional supported Drivers gt gt Additional supported Drivers YASKAWA MP2000 series Ethernet Mitsubishi MELSEC Q QnA Ethernet driver communication speed was improved This is applicable to HG4G 3G HG2G 5F 5S S Emerson ROC Protocol driver is not only supported in HG4G 3G and HG2G 5F but also now in HG2G 5S S lt Application Software gt Improvements The following Imp
36. ions the part object does not work according to the device value Line Chart Minimum Maximum Display Point Scroll Size Bar Chart Origin Minimum Maximum WindO I NV2 Ver 4 72 4 73 What s new in WindO I NV2 Version 4 73 lt Application Software gt Bugs Fixed The following problems have been fixed gt This is applicable to a communication driver Allen Bradley Ethernet IP Logix Native Tag If the name of Logix Native Tag is changed on the Tag Editor and it is allocated to the trigger condition the trigger condition might be blank after re opening the project file gt If Address with Relative Value is selected as Replace Type and All is not selected as Search Range the Replace can not be performed gt When User Communication is selected on Protocol1 3 on the Project Settings dialog box the Port No of MICRO I and Target can not be same gt Ifthe Condition is While satisfying the condition or Satisfy the condition the tag name including the strings SM SD or WSM cannot be configured on the trigger condition What s new in WindO I NV2 Version 4 72 lt Runtime System Software gt Improvements The following improvement has been added gt Horizontal Flip is supported as Installation orientation This is applicable to HG2G 5S S Bugs Fixed The following problems have been fixed gt If scan speed is low sound file can not be played sequentially This is applicable to HG4
37. ith Ethernet cable Touch Panel When more than one button is pressed at the same time due to the detection characteristics of an analogue type touch panel for HG2G 3G 4G HG1F EX4R only the gravity center of the pressed area is sensed and the unit assumes that only one button is pressed Thus when more than one button is pressed simultaneously the resulting operation is not guaranteed Multimedia Function 1 Movie files that can use Fast Forward and Rewind are as following restrictions If the playback time is 10 minutes or less the file must have at least one or more l frame every 2 seconds gt If the playback time is 10 minutes or more the file must have at least one or more l frame every 5 seconds 2 A popup screen consisting of the video display will remain if the popup screen is moved while video is displaying images or while a movie file is playing 3 Ifthe SD memory card is not recognized then the movie files may not play immediately after starting running the MICRO I In such cases perform playback after LSM21 ON while accessing the memory card is turned ON Parts 1 In Meter object Show Ticks function is not availeble if F0001 FO1010r F0201 No Flange is selected as part object image Wind0 I NV2 Ver 4 93 lt Application Software gt Improvements The following improvements have been added gt Windows 8 1 is supported gt If Allen Bradley Ethernet IP Logix Native Tag driver is selected the perform
38. ixed The following problems have been fixed gt In Numerical Input or Character Input if While ON or While OFF is selected in Trigger Type of Input Condition on Trigger Condition tab Device cannot be set gt In Allen Bradley Ethernet IP Logix Native Tag driver if an arrayed tag is selected in any property and then it is changed to other tags MICRO I may not be able to communicate the PLC Wind0 I NV2 Ver 4 80 lt Runtime System Software gt Improvements The following improvements have been added gt The number of HG Keep Relays and HG Keep Registers that are transferred to flash memory using LSM10 have been expanded from 1024 each to the number set with the data storage area This is applicable to HG4G 3G and HG2G 5F The following settings for Meter can now be individually specified as Value or Device This is applicable to HG4G 3G and HG2G 5F 5S S Minimum Maximum Range Sub folders can be copied by using file copy function This is applicable to HG4G 3G and HG2G 5F Add LSM52 to detect Remote control operation This is applicable to HG4G 3G and HG2G 5F All users password can be changed in System menu This is applicable to HG4G 3G and HG2G 5F 5S S Support pass through function by using WindSRV This is applicable to HG4G 3G and HG2G 5F Support Modbus RTU Slave driver This is applicable to HG4G 3G and HG2G 5F The maximum number of connected PLC for Ethernet communication is expan
39. ixed the MICRO I reset problem The MICRO I reset if the following conditions were met 1 Anon existing base screen is set as an overlay screen for a base screen 2 Selects the Display Order of Overlapping Screen to a non existing overlay screen number 3 The program is downloaded to the MICRO I 4 When the screen is switched to a base screen that is set as a non existing overlay screen in Monitor Mode the MICRO I is reset lt Host I F Driver gt 1 HG2G OMRON SYSMAC C Fixed the following bugs gt Bits are not kept in a byte when the bit write is executed gt The value of one device read from PLC first is not updated 2 HG1F 2F 2S 3F 4F OpenNet FC3A MicroSmart FC4A FC5A Web Server Unit FC3A FC4A FC5A Host Communication Error would be shown if the project data contained the following condition when using HG1F 2F 2S 3F 4F gt Reading more than 20 consecutive addresses and the device would be the Timer Contact T or Counter Contact C lt Application Software gt 1 Numerical Input Character Input When Keypad Type is Current Screen and Always Entry Mode check box is ON Reverse check box is masked lt Manual gt 1 Communication Manual gt Modified the connection diagram 2 and 4 of HG2G in Mitsubishi gt Modified the connector type of connection diagram 1 in Allen Bradley gt Modified the connector type of connection diagram 7 in Allen Bradley
40. me System Software gt Improvements The following improvements have been added gt The HG3G series is now supported gt The following functions have been added to HG3G series Ability to play sound files Ability to display bitmap and JPEG files Ability to display scalable fonts Internal devices for digital input output LEX LEY WLEX and WLEY Ability to change transparency of popup screens The File Copy function The Project Transfer function The PLC Program Transfer function Ability to support external memory devices USB flash drives and SD Memory Cards AutoRun function for USB flash drives A function that allows pictures displayed in the Picture Display to be switched at regular intervals Ability to connect USB barcode readers Ability to set the names of files stored in SD Memory Card when using the Alarm Log Data Log Operation Log and Recipe functions An automatic dimmer function The HG Special Internal Register LSD31 capable of saving screen numbers gt The HG2G Series now supports The HG Special Internal Register LSD31 capable of saving screen numbers lt Host I F Driver gt Improvement The following improvement has been added gt The Modbus ASCII Communication Driver has been added lt Application Software gt Improvements The following improvements have been added gt Items concerning models functions and settings in conjunction with the runti
41. me system software for HG3G series improvements gt Logical AND amp amp and Logical OR as logical operators for part trigger conditions gt The picture data for HG3G gt Tag Editor now supports Allen Bradley device addresses lt Manuals gt Communication Manual The following connection diagrams have been revised gt Allen Bradley Connection Diagram 4 HG2G 3G Terminal gt YASKAWA Connection Diagram 3 All models gt DM Link Communication Connection Diagram 3 1 1 HG2G 3G Terminal HG2F 3F 4F WindO I NV2 Ver 4 14 lt Application Software gt Bugs Fixed The following problems have been fixed gt The program would sometimes crash when the user edited a new project or an existing project saved in the folder set as the default path and then attempted to save the project under a different name in the same folder gt When Data Type is set as float32 for a Numerical Inoutnumerical display or numerical input partNumerical Display the Minimum and Maximum values for the Data Over range would revert to 0 even if they were set to values other than 0 WindO I NV2 Ver 4 12 lt Runtime System Software gt Bugs Fixed The following problem has been fixed gt Watch Dog function does not work in HG2G HG1F HG2F HG2S HG3F HG4F series after the MICRO I recovers from Host Communication Error lt Host I F Driver gt Improvement The following improvement has been added gt The Ethernet Commu
42. n and Operation Log function This is applicable to HG4G 3G and HG2G 5F Handle a value of device as a string and set it as file name of CSV file Add date and time to the file name Execute real time output at an arbitrary timing For details refer to the Memory Card Output Tab of each functions of the WindO I NV2 User s manual B1119 12 When Real Time is selected in Memory Card Output with Alarm Log function Data Log function and Operation Log function the log data is output as a CSV file before the log data size exceeds the maximum amount of Data Storage Area This is applicable to HG4G 3G and HG2G 5F For details refer to the Memory Card Output Tab of each functions of the WindO I NV2 User s manual B1119 12 Added a function to Numerical Input to display the data over maximum and minimum values This is applicable to HG4G 3G and HG2G 5F 5S S For details refer to Chapter 10 m Methods of using the Numerical Input on page 10 3 of the WindO I NV2 User s manual B1119 12 Added a function to Data Log function to delete log data by channel This is applicable to HG4G 3G and HG2G 5F 5S S For details refer to Chapter 14 m Clear Log Data on page 14 18 of the WindO I NV2 User s manual B1119 12 gt Script used with Grobal Script can now be set up to a maximum of 16 This is applicable to HG4G 3G and HG2G 5F 5S S For details refer to Chapter 20 3 2 Global Script Settings Dialog Box on page 20 14 of the WindO
43. n Software gt Improvements The following improvement has been added gt In INT DINT and SINT data type a bit in word data can be selected Bugs Fixed The following problems have been fixed gt Base screens and popup screens are not displayed on Screen List window when opening an exsiting project gt In ascript a tag name including both a period and a comma is changed to invalid tag name when opening an existing project gt In Allen Bradely Ethernet IP Logix Native Tag driver Host Communication Error may occur in the following cases The property dialog box is closed by cancel button after a tag name is entered The property dialog box cannot be closed by OK button because of an incorrect setting after a tag name is entered gt When you change Device Type on Tag Editor Tag Editor might crash WindO I NV2 Ver 4 82 lt Runtime System Software gt Improvements The following improvement has been added gt Support Hitachi Industrial Equipment Systems EH Ethernet driver This is applicable to HG4G 3G and HG2G 5F 5S S Bugs Fixed The following problem has been fixed gt If S7 200 PPI driver is assigned to COM1 and O I Link master is assigned to COM2 the communication speed between the MICRO I and the PLC is slow This issue only happen if the baud rate of O I Link is 57600bps or faster This is applicable to HG4G 3G and HG2G 5F WindO I NV2 Ver 4 81 lt Application Software gt Bugs F
44. n that compares project data and displays setting differences in screen units has been added To compare projects On the Home tab in the Project group click Compare A function that displays the usage of each script ID in the script manager has been added You can see the usage in the Used column in the Script List An option to download or not download picture and sound data to the memory card simultaneously with the download of project data has been added When WindO I NV2 closes abnormally it could damage the device address usage information A command that rebuilds device address usage information has been added Right click the tag editor in the project window and then click Rebuild Bugs Fixed The following problems have been fixed gt gt gt The device usage information will become invalid in Tag Editor or Cross Reference When an old version of the project has been opened the device address that has been set may disappear When using the HG3G and setting it to the USB port in communication settings and if a project is downloaded while monitoring or while in simulation the monitor or simulation mode will not reopen after the download is complete lt Downloader gt Improvements The following improvements have been added gt gt Supports 5 7 HG2G 5S 256 color TFT LCD Screen amp HG2G 5F 65K color 8 4 amp 10 4 HG3G w Multimedia and 12 1 HG4G w Multimedia A command line that downloads proj
45. nication Driver for Omron PLCs has been added in HG2G HG3F HG4FE series lt Application Software gt Bugs Fixed The following problem has been fixed gt The Forbid Web Server function checkbox on Project Settings dialog box gt Communication Interface tab is always disabled not selectable when O I Type is HG3F or HG4F series lt Manual gt Communication Manual The Expansion Communication Module RS485 part number FC5A SIF4 has been added in the Communication Manual Pass Through Tool Manual Capter 4 Operations Note has been updated WindO I NV2 Ver 4 11 lt Runtime System Software gt 1 Improvement The maximum number of screen capture can be set by entering a value in the HG Special Register LSD65 This is only applicable to HG3F HG4F Series lt Host I F Driver gt Improvements gt HG1F HG2F HG2G HG2S HG3F HG4F support VIGOR VB VH Series PLC gt The stability and reliability of the communication are improved in SIEMENS S7 MPI driver lt Application Software gt Improvements gt Replace for Device Address is supported when Connection Type is 1 N Communication gt Preference settings of Tag Editor are moved from WindO I NV2 Options dialog box to Context menu of Tag Editor lt Manual gt Instruction Manual Add notice about the write number of times in Flash Memory by using HG Special Relay LSM10 Wind0 I NV2 Ver 4 10 lt Runtime System Software gt 1 g
46. o access frequently used commands with minimum steps D E 2 A LO WindO I NV2 a Home Configuration Online View Format e Cut p E hal A m feas al fx i Fqlupload Copy C Delete F Paste New Shapes Picture Text Buttons Lamps Displays Charts Commands Select Arrange Download LH Duplicate Reuse X az X X j Dra j 5 i Targetinfo Fi Comm Setup 2 Advanced Interactivity for WindCFG and WindLDR WindCFG New System Configuration Software provides the advanced interactivity between WindO I NV2 and WindLDR Those two softwares can share the PLC device address information such as tag name and comments each other automatically 3 Expanded Device address capabilities Tag name is now available Added the cross reference function Device Addresses are set by drag amp drop operation using WindCFG and Tag Editor Expanded the device address format It allows the same as WindLDR The previous WindO I NV2 format is still available The expanded format allows as the separator of bit instead of and the space between Device Type and Address will not be necessary vv v v lt Manual gt 1 Instruction Manual Modified the Manual No of Instruction manual to HG9Y B1118 Fixed Problems lt Runtime System Software gt 1 HG2G Host I F Driver S7 MPI Fixed that in the software Ver 3 41 or Ver 3 42 Host Communication Error would be shown if using S7 MPI driver 2 HG2G Screen F
47. ollowing models HG2G SB22TF HG2G SB22VF HG2G SS22TF HG2G SS22VF HG2G SB21TF HG2G SB21 VF HG2G SS21TF HG2G SS21 VF HG2G 5ST22TF lt Application Software gt Improvements The following improvements have been added gt New features or improvements are added from the Runtime System Software upgrade gt Support Windowss gt Add dedicated password for opening project gt This is applicable to a communication driver Emerson ROC Protocol Add a option to input TLP on Device Address Settings dialog box Bugs Fixed The following problems have been fixed gt This is applicable to a communication driver Allen Bradley Ethernet IP Logix Native Tag The project saved with the older version of WindO I NV2 might not be opened gt This is applicable to a communication driver Allen Bradley Ethernet IP Logix Native Tag If a project is downloaded after editing a host communication error may occur on the Touchscreen gt Picture drawing objects and the part objects that image is picture cannot be placed on the library screen gt Trigger Condition of the part object might not be properly displayed on the edit screen gt When User Communication is selected on Protocol1 3 on the Project Settings dialog box WindO I NV2 might not allow to configure the Port No of Target even if it is proper gt After the project is downloaded to the MICRO I with the Zooming Conversion selected and Change O I Type executed
48. ome 1 after closing the Properties dialog box This is applicable to HG4G 3G HG2G 5F and Windows 7 64 bit edition Project Settings dialog box can get a Device empty error and cannnot be closed This is applicable to HG4G 3G and HG2G 5F 5S S The device count in Tag Editor and Cross Reference for devices being used in a script can be corrupted when those devices are allocated to Part objects and the other settings dialog box In a Numerical Input and a Numerical Display the number and the unit are not always displayed according to the configured font This is applicable to HG4G 3G and HG2G S 5S 5F A Device Range Error is sometimes shown on the touchscreen if an internal device is set in a script in a project that had been uploaded and re downloaded In a Multi Button when a script command is executed at the beginning of the Function List and View Switching Method is set to Device the image of the switch is not always changed by the value of the allocated device The width and height of a JPG file is shown as 0 0 after it was imported to the Picture Manager This is applicable to HG2G 5S S When the project name is changed in the Explorer tree WindO I NV2 is sometimes unable to open the project This is applicable to HG2G 5S S The Cross Reference dialog box sometimes displays incorrect information for a device having a hexadecimal address If the Host I F driver is MELSEC Q QnA Ethernet the displayed device address in Tag Edito
49. on of a zoom slider on the Status Bar has been improved The short cut menu of Tag Editor is added on the Project Window The following icons are modified on the Project Window Text Manager Picture gt 2 Manager and Script Manager Editing the Focus Order for Numerical Input and Character Input without changing the Screen Properties is now available Bugs Fixed The following problems have been fixed gt After changing the Host I F Driver the Error Check has failed to check for device addresses used in the screen data The CSV file can not be imported with Tex Manager if it includes the string with over 500 bytes in size After opening the project and Auto Hide function is enabled the Project Window Screen List Object List Part List and Toolbox are displayed Even though the project is saved the information on the Screen List window is not updated After starting drawing by double clicking the drawing object on the toolbox you can not keep drawing if you delete object with Delete key Multiple users can easily edit one project at the same time The items you select for the Workspace under Setup gt Object List tab are showing differently on the Object List window The project file name is kept in the Recent Project list even if you never saved it If you change the font setting for multiple buttons by using the common properties dialog box it will not apply properly The display text on the imported screens
50. ounts dialog box Preventive Maintenance MICRO I is set as TCP Server using User Communication If TCP connection is disconnected by Server MICRO I Client may not be able to connect the Server again This is applicable to HG4G 3G and HG2G 5F 5S S In Operation Log function logging data may not be saved to the SD memory card even if the Trigger Device of the Batch is ON This is applicable to HG4G 3G and HG2G 5F lt Application Software gt Improvements The following improvement has been added gt New features or improvements are added from the Runtime System Software upgrade Bugs Fixed The following problems have been fixed gt gt gt If size of the script is big the MICRO I might be reset after downloading a project Property of Goto Screen for Multi Functions gets an error if X Y coordinates is not a multiple of 20 This is applicable to HG4G 3G and HG2G 5F 5S S When a project file for HG2F 3F 4F is converted to HG2G 5FT or HG3G 4G the MICRO I might output CSV files for the logging function as the invalid name on Memory Card This is applicable to a communication driver Allen Bradley Ethernet IP Logix Native Tag A tag name on part object and settings might be changed to the other unintended tag name while editing the project A script error might be shown on the MICRO I if selecting Dot WindLDR Format as Bit Number Symbol on WindO I Options in a project that had been downloaded WindO I NV2 V
51. pe executed the size of parts displayed on the MICRO I differs from the size displayed on the WindOI NV2 gt If you change the project file name for HG2G S 5S in Windows Explorer the project can not be downloaded to the touchscreen gt Upload a project from HG2G S with project file created in WindOI NV2 ver 4 24 or older the device settings are completely erased if the project name is changed in the upgrade version WindO I NV2 Ver 4 43 lt Runtime System Software gt Bugs Fixed The following problems have been fixed gt When power on the HG2G 5S it may continue resetting POWER LED keeps blinking gt If ahost word device is used in popup screen and a bit in the word device is changed in base screen or popup screen an incorrect value may be written to the word device For HG1F 2F 2S 3F 4F this problem only happens when the 1 N Communication is selected as the Connection Type gt If host bit device is used in the following functions the correct device value can not be read For HG1F 2F 2S 3F 4F this problem only happens when the 1 N Communication is selected as the Connection Type Alarm Data Log Operation Log Reference Device Offset Device Device Monitor function in Web server Monitor function in WindO I NV2 gt When the Character Input set as Use as Display for Keypad is used with the HG2G 5F or HG3G 4G the characters are not displayed properly WindO I NV2 Ver 4 42 lt Runt
52. r is not correct if the device type is WB WX or WY Part objects are sometimes not displayed on the touchscreen WindO I NV2 Ver 4 61 lt Runtime System Software gt Bugs Fixed The following problems have been fixed gt Inthe User Communication function when either Device Registering Constant Character or Hexadecimal is contained in a transmission TXD command communication stops and the MICRO I resets gt When the Web Server function is used for long periods of time the web server might no longer be accessed by clients gt The information displayed under Slave Online Status on the Web Server function s System Information System Detailed Information page is not correct lt Host I F Driver gt Bugs Fixed The following problem has been fixed gt When Omron SYSMAC CS1 CJ Series Ethernet is selected Host Communication Error appears if Fatal CPU Unit error or Non fatal CPU Unit error happens in the PLC lt Application Software gt Improvements The following improvement has been added gt This is applicable to a communication driver Allen Bradley Ethernet IP Logix Native Tag During a tag database L5K and CSV file import a message has been added to alert a user if the tag imported is not supported The customer will have the option to bypass the repeated message and continue with the download of supported tags only Bugs Fixed The following problems have been fixed gt All settings disappe
53. rnet gt YOKOGAWA FA M3 Ethernet Expanded Drivers gt KEYENCE KV5000 driver Added more range or device addresses Bugs Fixed The following problems have been fixed gt Communication error occurs on the HG2G 5F HG3G 4G if using the Allen Bradley Ethernet IP driver gt Communication may slow and communication errors may be displayed if using the the KEYENCE KV Ethernet driver with the HG2G S 5S lt Application Software gt Bugs Fixed The following problems have been fixed gt If the MICRO I type in a project that uses a period in the project name anywhere other than the extension is changed the location where the MICRO I internal devices had been configured becomes blank For instance if you make a project named aaaa bb for HG3G the project file will be aaaa bb n3g And you set a LM 100 HG Internal Device to the Bit Button in this project After changing the O I type from HG3G to others you will see that the device setting of the Bit Button is deleted gt You may no longer be able to change the MICRO I type when opening a project created with an old version gt Projects cannot be downloaded to the HG2S gt When multiple pictures are registered in Picture Manager if one of the pictures is removed and Picture Manager is reopened WindO I NV2 might crash Wind0 I NV2 Ver 4 40 lt Runtime System Software gt Improvements The following improvements have been added gt gt Supports 5
54. rovements have been added gt gt gt Changed the Save Screen As shortcut to Ctrl G and assigned the shortcut Ctrl A to Select All New features or improvements are added from the Runtime System Software upgrade If Zooming Conversion is selected in the Set Conversion Option it will automatically adjust the size of the registered text and coordinates of the screens i e Overlay Screens or Goto Screen button Bugs Fixed The following problems have been fixed gt When the host I F driver is Allen Bradley Ethernet IP Logix Native Tag WindO I NV2 may be forcibly terminated if tags are used for device addresses When multiple objects are selected and moved a portion of the objects may not move to the intended location If the editing window zoom is set to 100 or more when selecting objects the cursor may move to an unintended location Create a HG2G S 5S project add a selector switch and close the screen When the screen is opened again the selector switch is displayed in the location 0 0 When opening a project created with an old version the device information may become invalid When Picture Manager is opened the thumbnails may disappear What s new in WindO I NV2 Version 4 52 lt Runtime System Software gt Improvements The following improvement has been added gt The new password is not requred when transferring a project file from the SD Card USB Flash Drive which contains that n
55. s respond gt Fixed that the settings of MAC Address and LCD size were reset on HG3G if the power was turned off right after the power was applied or the screen was changed to System menu WindO I NV2 Ver 4 23 lt Runtime System Software gt Bugs Fixed The following problem has been fixed gt HG3G might not be powered up The possibility of this problem depends on each individual unit lt Host I F Driver gt Improvement The following improvement has been added gt Improve DM Link 1 1 or DM Link 1 N host I F driver to reduce the influence of scan speed from the driver when large amount of communication happens lt Application Software gt Bugs Fixed The following problems have been fixed gt You change the O I type or the Host I F driver of the project which contains the scripts written by using tags When you download this project without editing the scripts the scripts do not work properly gt When you use the Monitor function on Windows 7 32 bit 64 bit WindO I NV2 crashes under the following conditions 1 Inthe Properties dialog box of the Word Button Key Button Selector Switch Pilot Lamp Character Input or Picture Display While satisfying the condition is selected as Trigger Type on the Trigger Condition tab and tags are used in the Condition 2 Inthe Object List window there is the part object which While satisfying the condition is selected as Trigger Type on the Trigger Condition tab next
56. s when updating the display stops This is applicable to HG4G 3G and HG2G 5F 5S S gt With Normal or Pen Recorder of Line Chart the following problems occur This is applicable to HG4G 3G and HG2G 5F 5S S The oldest data cannot be displayed even by stopping display updates and scrolling right If grid lines were displayed the grid lines are deleted when the log data displayed on the chart is cleared If the log data is cleared when the log data is a single point displayed on the chart the chart is not updated even when new log data is acquired gt With Horizontal Peak or Vertical Peak of Bar Chart if either values of Minimum and Maximum are 0 the chart is not displayed correctly gt When displaying 32 bit data using channel 17 through 20 of Line Chart the chart may not be correctly displayed This is applicable to HG4G 3G and HG2G 5F 5S S gt When KEYENCE KV 3000 5000 is selected as the host I F driver the X Y M address progression differs from the PLC programming software This is applicable to HG4G 3G and HG2G 5F 5S S lt Application Software gt Improvements The following improvement has been added gt New features or improvements are added from the Runtime System Software upgrade Bugs Fixed The following problems have been fixed gt In preview or printing units set to Numerical Input and Numerical Display may be displayed extending from part objects This is applicable to HG4G 3G and HG2G 5F 5
57. supports the HG2G 3G 4G HG1F 2F 2S 3F 4F Text and Fonts 1 In a character input when there are number restrictions of characters such as a Registration Text or a Message Display a carriage return is equivalent to two characters 2 The recommendation font of WindO I NV2 is Small font of a Windows system 3 The font line and the resized Picture displayed on WindO I NV2 may differ from a display with the MICRO I please make sure in the MICRO I Screen display Print 1 Depending on the hardware configuration of the personal computer currently used a picture may be confused while in use Then please turn off a hardware accelerator 2 If garbled characters are shown in printing please set Printing Font again 3 When the project which the file size is big is printed with RTF file a message regarding clipboard is sometimes opened Please separate Print Range then print them to solve this problem 4 Picture file size in Picture Manager may be displayed as OKB 5 Screen images in Screen List may not be displayed properly Only upper half of screen image is displayed Edit 1 WindO I NV2 does not have the limitation of number of editing screens which can be opened at the same time The limitation depends on the RAM in PC 2 When Open Close Project command is repeated to the project a message regarding insufficient memory is sometimes opened Please exit WindO I NV2 once then re launch it to solve this problem This
58. t gt Improvements HG2G DC12V model is now supported HG2G Pass through function via Ethernet is now supported The touch panel determination handling has been improved to avoid the unexpected behavior which caused by pressing two points at the same time When pressing two points at the same time the second one will not be accepted Bugs Fixed O I Link Communication do not work when SERIAL I F 1 is set as O I Link Slave and SIEMENS S7 MPI or S7 200 PPI is selected as Host I F Driver in HG2G series lt Host I F Driver gt Improvement The communication driver has been added for Toshiba EX100 to HG1F HG2F HG2G HG2S HG3F and HG4F series Bugs Fixed The Event Output might not work if DM Link 1 1 or DM Link 1 N with HG2G Series is selected lt Application Software gt Improvements Able to open the Tag Editor from WindO I NV2 when launched from WindCFG Able to change the display order and hide the Tag Name column to Options dialog box of WindO I NV2 The customize feature of Quick Access Toolbar has been improved You can open the Tag Editor from Device Address Settings dialog box and check the Device Address usage The Replace Device Address feature is supported and it is found at the Editing group on the Home tab The icon displayed on the Editing Window tab has been modified to conform to the icon for Base Screen and Popup Screen displayed on Ribbon Control and Project Window The operati
59. tination Device in Word Write Command If a project is created by an older version the tags which are used in the project may be changed other tags when the project is opened by newer version If a project is created by an older version and bit of word tags are used in the project host communication error occurs after downloading the project by newer version When multiple tag names or comments including blank cells are pasted on Tag Editor those blank cells are removed Wind0 I NV2 Ver 4 88 lt Runtime System Software gt Improvements The following improvements have been added gt Lower case characters are supported when Device is selected as Receive data in User Communication Function This is applicable if ASCII HEX to Binary is selected as Conversion Type in Data Settings This is applicable to HG4G 3G and HG2G 5F 5S S Bugs Fixed The following problem has been fixed gt If MEMCPY function is used in script function and host device is selected as destination device scan speed becomes slower This only happens if Always Enabled or While satisfying the condition is selected as Trigger Type gt In Data Log function Report Device is not initialized even if the device which is selected as Clear Log Data in Individual Settings turns on This is applicable to HG4G 3G and HG2G 5F 5S S gt In Data Log function and Operation Log function Monitor space Used in Data Storage Area is not initiali
60. to the above part object 1 gt If you download an unusual project to the HG2G or the HG3G the commnucations problem arises between the WindO I NV2 and the HGs gt After you setup the Pilot Lamp on the editing screen the Recover Background check box is always masked when you reopen the Properties dialog box of it WindO I NV2 Ver 4 22 lt Application Software gt Bugs Fixed The following problems have been fixed gt With Ver 4 21 unknown error occurrs and WindO I NV2 freezes when trying to convert from the HG F HG2S project data to HG3G s gt When the O I type is HG3G and the With Unit checkbox of Numerical Input or Numerical Display is selected 1 is always set to the Magnification settings gt If the Fixed Period is selected as the Switching Method of the Picture Display and the Interval is set to the specific value HG3G keeps resetting itself when the screen contains this Picture Display is displayed WindO I NV2 Ver 4 21 lt Application Software gt Bugs Fixed The following problems have been fixed gt After uploading a project which included 24 bit bitmap from HG3G the bitmap files were corrupted gt The magnification settings of Numerical Display and Calendar did not change if the O I type was HG3G and the font type was Standard gt The display value on Numerical Input was garbled if the O I type was HG3G and the font size was 16x16 Wind0 I NV2 Ver 4 20 lt Runti
61. ts List was not available when the O I type was HG4F 6 Screen List and Parts List Fixed that nothing was shown in the list after reopening your project after you closed it with the Screen List and the Parts List in auto hide 7 Color Palette Fixed that the Color Palette would change from the 256 colors considering 256 color was the Original to the monochrome or vice versa where monochrome is considered as the original after executing the Target Info 8 Batch Monitor Fixed that WindO I NV2 might crash when you tried to close the Batch Monitor after selecting Host as Target lt Downloader gt 1 Read Device Data Write Device Data Increased No of Data from 64 to 2000 2 Upload Log Data Fixed the problem that the uploading of Logging Data with using command line failed in HG1F 2F 2S 3F 4F Wind0 I NV2 Ver 4 00 New feature Improvement The following functions are introduced to WindO I NV2 Version 4 00 lt Host I F Driver gt 1 Modbus RTU Supported the setting to use No 0 as Broadcast No 2 OpenNet FC3A MicroSmart FC4A FC5A Web Server Unit FC3A FC4A FC5A Supported AutomationOrganizer gt United SM to M and united SD to D gt Changed the name of TN to TC and CN to CC gt Changed the name of Device number to Network Number lt Application Software gt 1 Changed New GUI Graphics User Interface Pull down menu and Tool bars were changed to Ribbon Control and allows you t
62. ver gt Additional supported Drivers gt gt gt FUJI MICREX SX Serial FUJI MICREX SX Ethernet Emerson Floboss107 Bugs Fixed The following problems have been fixed gt When the Allen Bradley PLC 5 or SLC500 is selected for the Expression of Device Address Format the Device Monitor cannot be used This is applicable to HG4G 3G HG2G 5F 5S S When the 1 N Communication is selected for the Connection with the Modbus TCP Client no recovery when a communication error occurs This is applicable to HG4G 3G HG2G 5F 5S S When the 1 N Communication is selected a value may be read for the Address differs from the one specified according to the combination of the Station Number and the Address This is applicable to the following Host I F drivers Ethernet IP Logix DF1 Full Duplex DirectLogic Ethernet KV Ethernet MELSEC FX3U Ethernet lt Application Software gt Improvements The following improvements have been added gt gt New features or improvements are added from the Runtime System Software upgrade When creating a new project the description for the HG Special Registers LSD and the HG Special Relays LSM is now registered in the Comment Bugs Fixed The following problems have been fixed gt gt When changing the O I Type from HG4G 3G to HG2G 5F the size of the Popup Screen may not be change correctly When opening a project saved with WindO I NV2 Ver 2
63. y from IDEC FA3S Communication failed when the MICRO I resetted while communicating with the CPU port of a KEYENCE KV 1000 Series PLC The following issues would occur when a different communication speed was set for COM1 and COM2 SIEMENS S7 MPI Host I F Driver COM2 could not communicate at 187500 bps SIEMENS S7 200 PPI Host I F Driver COM2 could not communicate Keyence KV700 1000 Host I F Driver The communication speed set on COM2 would not reflect correctly when communicating with the CPU port of a KEYENCE KV 1000 Series PLC DM Link 1 1 Host I F Driver COM2 could not perform event transmission MELSEC Q CPU Host I F Driver The communication speed set on COM2 would not reflect correctly lt Application Software gt Improvements The following improvements have been added gt gt New features improvements are added from the Runtime System Software upgrade Pictures for the following parts have been added to the Part List and the part library Numerical Input Numerical Display Character Input Message Display Message Switching Display Calendar Meter The option to show or hide script errors It is now possible to set scripts to run at set intervals Cyclic Script without affecting screen scan time on screen part processing This is an effective function when using expansion units Bugs Fixed The following problems have been fixed gt If DPI setting was set to anything ot
64. ypad window This is applicable to HG4G 3G HG2G 5F In a Numerical Input if Current Screen is selected as Keypad Type and Always Entry Mode is enabled data could not be entered properly if the visible invisible condition is changed while entering data This is applicable to HG4G 3G HG2G 5F A move file is not played automatically when Use Event Recording is enabled even if Auto Play is enabled in the Video Display object This is applicable to HG4G 3G MICRO I may stop if uploading downloading data or changing system mode when it starts playing movie file This is applicable to HG4G 3G When the MICRO I starts running movie file may not be played This is applicable to HG4G 3G If a host device is set to Report when Sampling Count has reached or exceeded Threshold or Report when Space Used has reached or exceeded Threshold in Data Log settings invalid value is written to the device This is applicable to HG4G 3G and HG2G 5F 5S S The display size of the movie file may be smaller than the Video Display This is applicable to HG4G 3G lt Application Software gt Bugs Fixed The following problems have been fixed gt gt An NG error can appear if MEMCPY and MEMCMP were used in a script If a NMF file is allocated to a state of the Multi State Lamp it can become Unregistered after overwriting the same file by importing another NMF file to the Picture Manager The Popup Screen No for the Key Button Alt bec
65. zed even if log data is cleared This is applicable to HG4G 3G and HG2G 5F 5S S gt Apart of part object disappears when an adjacent part object is blinked or hided on popup screen This is applicable to HG4G 3G and HG2G 5F gt When Device is selected as Display Points or Scroll Size in Line Chart and the device value is grater than 32768 it is handled as minus value This is applicable to HG4G 3G and HG2G 5F 5S S gt When Cursor Display Position is set in Line Chart and the device value is grater than 32768 it is handled as minus value This is applicable to HG4G 3G and HG2G 5F lt Application Software gt Improvements The following improvement has been added gt The description for the HG Special Registers LSD and the HG Special Relays LSM is added This is applicable to HG4G 3G and HG2G 5F 5S S Bugs Fixed The following problems have been fixed gt Some device types are not displayed on Tag Editor gt In Data Log Settings the setting value of Threshold on Report when Space Used has reached or exceeded Threshold is not reflected to operation This is applicable to HG4G 3G and HG2G 5F 5S S If there are any characters except alphanumeric in a script Find function might be failed in script editor In Allen Bradley Ethernet IP Logix Native Tag driver WindO I NV2 might crash after opening the device setting dialog repeatedly After changing the property of more than one part object whic

"user manual"

Contents

Download Pdf Manuals

Related Search

Related Contents

&quot;user manual&quot;

Contents

Download Pdf Manuals

Related Search

Related Contents

"user manual"