User`s Manual
Contents
1. effect There is picture on screen but the unit is not responding No Wi Fi network can be detected Safe mode appears at the bottom left corner of the screen The unit will not charge Battery power is low Battery power is low The unit needs to be restarted The unit needs to be restarted The unit needs to be reset The unit is in Safe Mode The power source is not properly connected Connect the unit to a wall outlet using the included USB cable and AC adapter A green light on the unit will turn on to indicate charging is in progress When the battery is fully charged the light will turn off Connect the unit to a wall outlet using the included USB cable and AC adapter A green light on the unit will turn on to indicate charging is in progress When the battery is fully charged the light will turn off Make sure the unit is off by holding the power button down for 10 seconds and then releasing it Touch the Power button again for 3 seconds to power the unit on Make sure the unit is off by pressing the power button for 10 seconds and then release it Hold the Power button again for 3 seconds to power on the unit Restore the unit to factory settings by holding the LEFT key UP key and HELP key at the same time while turning the power on You will see a factory reset confirmation screen Touch Yes to confirm that you want to reset the unit All user data will be lost afte2. provider licensed to provide AVC video No license is granted or shall be implied for any other use Additional information may be obtained from MPEG LA L L C See http www mpegla com Disclaimer and Limitation of Liability VTech Electronics North America L L C and its suppliers assume no responsibility for any damage or loss resulting from the use of this handbook VTech Electronics North America L L C and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of this software VTech Electronics North America L L C and its suppliers assume no responsibility for any damage or loss caused by deletion of data as a result of malfunction dead battery or repairs Be sure to make backup copies of important data on other media to protect against data loss Company VTech Electronics North America L L C 25 Address 1156 W Shure Drive Suite 200 Arlington Heights IL 60004 USA Phone 1 800 521 2010 in the U S or 1 877 352 8697 in Canada Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radi
3. SD Card Slot Holder microSD card not included Cartridge Slot 5 The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Charging the Tablet The battery will be partially charged when the tablet is first opened from the box It should be fully charged before the first use To charge and recharge the battery please follow the instructions below Note Do not try to disassemble the product to replace the battery 1 Insert the larger end of the USB cable included into the USB socket of the Power Adapter and insert the other end into the USB port on your InnoTab MAX Then plug the Power Adapter into a wall socket Note The Power Adapter is not a toy and should only be handled by an adult 2 The green light on the tablet will turn on to indicate charging is in progress When the battery is fully charged the light will turn off A full charge takes about 4 5 hours with the USB Power Adapter Turning Your InnoTab MAX On or Off To turn on your tablet press and hold the Power button for 3 seconds You will see the VTech logo See the Register Now section for instructions on your first start up You may turn off the tablet if it will not be used for an extended period of time To turn off your tablet press and hold the Power button and touch the prompt to confirm Locking and Unlockin
4. Visit the official Android website below to download the Android File Transfer software Follow the instructions on the website to install the software and transfer files httos www android com filetransfer Converting Videos for the InnoTab MAX To convert your video content for the InnoTab MAX use the following recommended settings Format H 264 main profile video and AAC audio in an MP4 file Resolution 1024x578 if source is 16 9 Other resolutions are supported but are not optimal for the device Video bitrate 2000kbps Other bitrates are supported but are not optimal for the device Audio bitrate 128kbps constant bitrate Other bitrates are supported but are not optimal for the device Maximum file size 4GB over 4 hours of play time using the recommended settings Notes e There may be legal restrictions associated with the use of commercial video files movies programs and other content for which VTech accepts no responsibility or liability Users should take responsibility for observing relevant copyright law in their country for this type of media e VTech does not endorse support or accept any liability for any third party software for file transfer or media conversion Updating the Firmware To manually download and install the latest firmware 1 Go to Parental Controls 2 Make sure your InnoTab MAX is connected to the Internet 3 Select Tablet Settings Then select Firmware Update Settin
5. artridge icon to play The physical cartridge must be inserted to play For acomplete list of titles that are compatible with the InnoTab MAX and their estimated availability dates please visit httpo www innotabsoftware com Note The InnoTab MAX can store up to three InnoTab cartridges Additional update files will overwrite the older ones Resetting the tablet to factory settings will also clear the updated versions of the cartridges In this case the programs will need to be downloaded again Transferring Pictures Movies and Songs You can transfer your own pictures movies and MP3 songs from your computer to your se ec InnoTab MAX However the InnoTab MAX will InnoTab MAX not be detected by some computer operating Internal Flash systems For PC users we recommend using a do computer with Windows 7 or later Ji Alarms di Android Transferring from a Windows Computer J DCM Connect the InnoTab MAX to your computer using the included USB cable Use the File L Transfer window that pops up on your computer Db Notifications to drag and drop files to their corresponding WB obb folders on the InnoTab MAX or an inserted CT Pictures O microSD card Ji Podcasts Earlier generations of Microsoft Windows such Ji Ringtones as Windows XP may not detect the tablet This kean can be resolved by using third party file transfer software not included for Android devices Transferring from a Macintosh Computer
6. ctory settings Select Yes to continue WARNING Resetting the tablet to factory settings will erase all data stored on the tablet including any apps you have installed and the progress made on any games Apps downloaded from Learning Lodge can be reinstalled by going to the Download Manager in Parental Controls Safety Precautions for Using the Battery and Charger Important Notes e This charger is not a toy This charger is not intended for use by children e The tablet will charge at temperarures between 41 F 95 F 5 C 35 C If the tablet is not charging properly please move it to a location with a suitable temperature e The battery is not removable e Disconnect the tablet from the Power Adapter and turn off the tablet before cleaning e Only use the Power Adapter that is included with this package e To prevent fire or electric shock do not expose the unit to rain or moisture e To preserve battery life the InnoTab MAX will go into a sleep mode automatically when there is no input for a few minutes The Wi Fi connection will also be disconnected when the battery power is low Standard guidelines for adapter toys and electrically operated products As with all electrical products precautions should be used and observed during handling and use to prevent electric shock Do not leave the toy plugged in for extended periods of time The toy shall only be used with the included adapter Never clean a
7. emoved to make the InnoTab MAX slimmer and more lightweight 2 Pull out on the hinge 1 Slide down and hold the cover lock switch Repeat the steps on the other side Attaching the Cover 1 Pull out on one of the hinges of the cover 2 Insert the valve into one of the sockets and push in until you hear and feel a click Repeat the steps on the other side Wi Fi Setup If you want to set up a new Wi Fi network after registration follow the steps below 1 From the Lock screen drag the Parental Controls icon to the circle at the center of the screen Then enter your Parental Controls passcode 2 Touch the Wi Fi icon Time Limits Content Lock Web Browser Profile Controls Manager Parent Progress Log Tablet Account Settings Learning Lodge ft Download Manager 3 Make sure Wi Fi is on The tablet will list the available networks Touch the network that you would like to connect to and enter a password if needed When the connection is set up touch the check mark to return to the Parental Controls menu Note The InnoTab MAX supports 802 11 b g n wireless standards Touch here first to turn on Wi Fi Home Network Connected ABC Cafe Secured with WPA2 Tom Secured with WPA WPA2 WPS available Chris Secured with WPA2 Alex Secured with WPA2 May Secured with WPA2 Susan Secured with WPA WPA2 WPS available John Secured with WPA2 The Desktop Profile Pict
8. ental Controls screen you can access all of the kid safe settings available on the InnoTab MAX From the lock screen access Parental Controls by dragging the Parental Controls icon to the circle at the middle of the screen Touch this Parental Control image or press the menu key to the left to Py exit Parental Controls Parental Control Settings Touch this icon to set up a Wi Fi connection O TineConwols Touch this icon to limit the amount of time your child is allowed to play with the tablet Touch this icon to lock specific content from being Content Lock accidentally deleted Web Browser Touch this icon to add or remove sites from each child s approved list Navigation to sites that have not been approved is prohibited Profile Manager Touch this icon to add or remove user profiles from the tablet 5 Parent Account Touch this icon to view or edit Parent Account A information including My Wishes settings Controls Touch this icon to view your child s learning progress Note The Progress Log can only track progress on InnoTab cartridge games Touch this icon to configure the tablet s system Q Tablet Settings settings D Touch this icon to browse Learning Lodge and 9 Learning Lodge purchase games e books music videos and apps Zz Progress Log Touch this icon to reward your child with extra Kid Connect stickers desktop themes and My Magic Beanstalk gifts Gift Ga
9. er s authority to operate the equipment A USB cable with a ferrite core must be used with this equipment to ensure compliance with the Class B FCC limits Legal Notices Use of VTech Kid Connect e VTech Kid Connect is a subscription based service The VTech Kid Connect service included with this purchase is free for one year from the date of registration of this InnoTab MAX e The VTech Kid Connect app is available through the Apple App Store and Google Play and comes with a one year free VTech Kid Connect subscription Mobile data service and an Internet connection are required CLASS 1 LED PRODUCT Version 2 Release date Nov 27 2014 2014 VTech Q9 D
10. esolution 3520x480 Some functions are only available on Android 4 0 3 or above Launch the app on your mobile device and log in with your Kid Connect ID Managing Your Child s Contacts You can manage your child s contact list with the mobile version of Kid Connect Viewing Your Child s Contacts Go to your contact list and touch the icon to the far right of your child s name to see all of your child s contacts Click to view your child s contact list e Adding or Removing Contacts from Your Child s List SURI Remove contacts Immediate Family Your name and any other children registered under your account will appear in this section These are added automatically and cannot be removed Other Family amp Friends Any other contacts on your child s list will appear here e Sending Friend Requests and Invitations e oe Touch the wrench to enter edit mode then touch the delete icon next to any contacts you wish to remove Add Contacts Touch the plus sign to add a new contact Touch the plus icon next to Other Family amp Friends to go to the Add New Friend screen Search Results Once the search is done touch the correct profile then follow the on screen instructions to send a friend request The new friend will appear on your child s contact list once the request is accepted Notes Sandy SA 1D 345567 _ Sandy 1D 124586 Search To searc
11. g Parent Account and log in address has already product on with the email address you entered been used Learning Lodge before If you forgot your password touch Forgot Password When creating a Kid The email If you have already signed up for Connect account the address was Kid Connect enter your password unit reports the email already used to and touch Verify to continue If address has already register for Kid you forgot your password touch been used Connect ona Forgot password and follow the smartphone instructions in the email to reset your password Touch here in the link under the password field and use another valid email address Kid Connect will not The profile needs From the Parental Controls screen load to be reset open the Profile Manager program Touch the picture of the profile that will not load and then touch the wrench to enter edit mode Touch the trash can at the bottom left corner of the screen and then confirm deleting the profile After the profile is deleted add the child s profile back by touching the plus sign Select the same child s name from the name drop down menu Touch OK when you re done Screen displays with Volume is turned Adjust the volume control no sound down Headphones are Unplug headphones from connected headphone jack Screen turns on then immediately off No picture or incorrect picture displays on screen and pressing the Power button has no
12. g the Tablet By default the InnoTab MAX screen will be locked when it is not in use for a while To unlock the tablet s screen press the Power button to wake it up Then drag your profile icon to the circle at the center of the screen To lock the tablet s screen press the Power button once The display will go black Inserting a microSD Card You can insert a microSD memory card not included into your InnoTab MAX to expand available memory for downloaded content photos videos or music The InnoTab MAX is compatible with microSD memory microSD Card slot Insert the microSD card with the text facing you e Make sure the tablet is turned off e Turn the InnoTab MAX over and locate the microSD card slot on the back Insert the microSD card as shown above Connecting toa TV In order to connect the InnoTab MAX to your TV you ll need a mini HDMI to HDMI cable also Known as an HDMI type A to type C cable not included Locate the mini HDMI port on the back of your InnoTab MAX and insert the mini HDMI end of the cable into your tablet Plug the HDMI end of the cable into the HDMI jack on your TV Using the Stand The cover can protect the screen of your InnoTab MAX when flipped to the front Flipping the cover to the back makes a stand to provide a better viewing angle for watching videos or a photo slide show Detaching the Cover The cover can be r
13. gs wes patoa ye 4 The InnoTab MAX will check for the latest firmware If there is a newer version of the firmware follow the on screen instructions to complete the download and installation Firmware Update Care amp Maintenance 1 Keep your InnoTab MAX out of direct sunlight and away from direct sources of heat 2 Turn off your InnoTab MAX when not using it for an extended period of time 3 Avoid dropping your InnoTab MAX and NEVER try to dismantle it 4 Always keep your InnoTab MAX away from water 5 Examine the power adapter periodically for conditions that may result in the risk of fire electric shock or injury to persons such as damage to the output cord blades housing or other parts In the event of such conditions the adapter should not be used until properly repaired Using the InnoTab MAX Touch Screen and Stylus Use your finger or the included stylus to operate the tablet Be careful not to press down too hard as too much pressure may damage the touch screen Do not use the stylus if it is broken Do not use any other stylus on the touch screen other than the InnoTab MAX stylus Put the stylus back in the stylus holder when not in use Cleaning the InnoTab MAX Touch Screen Slightly dampen a soft lint free cloth with a little water and wipe the screen to loosen dirt Use a clean and dry cloth to wipe the screen dry Repeat these two steps as needed C
14. h for someone who has already joined Kid Connect type in their name or Kid Connect ID and touch the Search button Invite New User Click here to invite any family or friends who have not joined Kid Connect VTech recommends searching by the Kid Connect ID Your child s Kid Connect ID can be found underneath their name in your contact list Friend requests from smartphone to smartphone are prohibited The app can only be used to communicate with InnoTab users The Invite New User button can be used to invite a family member or friend who has not already joined Kid Connect Keep in mind the invitee must have a smartphone or tablet to be able to install the Kid Connect app e Accepting or Rejecting Friend Requests Touch the Friend Requests icon A to view any pending friend requests for you or your children Select a request to accept or reject it Touch here to view Friend Requests e Family Group Chat You and any children who are registered under your account are automatically entered into your family group Anyone in your group can communicate in the group chatroom where all members can see and post messages To see who s in your family group touch the icon to the far right of your family icon in your contact list Touch to see the members of your family group To add or remove members from your family group follow the same steps outlined in the sections above Parental Controls From the Par
15. he actions you took right before the problem started Internet www vtechkids com Phone 1 800 521 2010 in the U S or 1 877 352 8697 in Canada Copyright Notices 2014 VTech All Rights Reserved InnoTab Learning Lodge VTech and the VTech logo are registered trademarks of VTech All other trademarks are property of their respective owners The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries IMPORTANT NOTE Creating and developing the InnoTab MAX is accompanied by a responsibility that we at VTech take very seriously We make every effort to ensure the accuracy of the information that forms the value of our products However errors sometimes can occur It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department at 1 800 521 2010 in the U S or 1 877 352 8697 in Canada with any problems and or suggestions that you might have A service representative will be happy to help you This product is licensed under the AVC patent portfolio license for the personal use of a consumer or other uses in which it does not receive remuneration to Ci encode video in compliance with the AVC standard AVC video and or Cii decode AVC video that was encoded by a consumer engaged ina personal activity and or was obtained from a video
16. is On app updates will be downloaded automatically when you re connected to the Internet Get More from Learning Lodge You can visit Learning Lodge to expand the content on your child s InnoTab MAX anytime you have a Wi Fi connection To access Learning Lodge from the InnoTab MAX just touch the Learning Lodge icon at the bottom of the Parental Controls desktop To visit from a personal computer go to http wwwvtechkids com and click Downloads on the top menu bar By default when an internet connection is available on your child s InnoTab MAX any recently purchased apps will download automatically even if you purchased them from another device My Wishes With My Wishes your child can view apps that are available in our Learning Lodge library and let you know what apps they like by making a wish The wish list will then be sent to the email address you used to register for a VTech Parent Account Managing Your Child s Wishes To view the apps your child has wished for click on the link in the email we send you The Wish List Manager will open in a web browser Follow the prompts on screen if you want to purchase the app Learning Lodge Navigator Wish List Manager we Download Cart Details Details Purchased apps will be downloaded to InnoTab MAX using the Wi Fi Connection See the Managing Apps section for more details about downloading purchased apps Pop Ups on InnoTab De
17. leaning the InnoTab MAX Cabinet Keep your InnoTab MAX clean by wiping it with a slightly damp cloth Never use solvents or abrasives WARNING A very small percentage of the public due to an existing condition may experience epileptic seizures or momentary loss of consciousness when viewing certain types of flashing colors or patterns especially on television While the InnoTab MAX does not contribute to any additional risks we do recommend that parents supervise their children while they play video games If your child experiences dizziness altered vision disorientation or convulsions discontinue use immediately and consult your physician Please note that focusing on an LCD screen at close range for a prolonged period of time may cause fatigue or discomfort We recommend that children take a 15 minute break for every hour of play Troubleshooting Problem Possible Reason Not enough battery Battery power Connect the unit to a wall outlet power message is low using the included USB cable and shown during firmware AC adapter A green light on the unit update will turn on to indicate charging is in progress When the battery bar on screen is full the firmware update will continue automatically When registering for The email a new Parent Account address was Turn the unit off and back on to start during setup the unit used to register registration over Select Log In With reports the email another Vtech Existin
18. llery Download Use this to install or uninstall apps that you bought Manager from Learning Lodge See the Managing Apps section for more details To exit from Parental Controls press the Menu key and then touch Log Out to exit to the lock screen Managing Apps From the Parental Controls screen touch the Download Manager icon amp to manage the apps you have purchased from Learning Lodge for your InnoTab MAX e Downloading or Removing Apps From the Download Manager menu touch any of the category tabs to view the apps in the selected category All the apps you ve bought from Leaming Lodge are listed below Touch the trash can to remove an app ora greyed out app to reinstall it Go ko Escape g Trash Can ma tle Size i M 5 K 53 Touch to remove 3 an installed app Stop Touch to stop downloading an app Download Touch to download and install an app e Automatic Download Settings By default newly purchased apps or updated apps will be downloaded automatically If they do not automatically download make sure automatic downloading is turned on in Tablet Settings Turn this on to download newly purchased apps New App ON OFF automatically Automatic Download Settings YY When this is On newly purchased apps will be downloaded automatically when you re connected to the Internet App Update ON F Turn this on to download app updates automatically When this
19. o communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES AND INDUSTRY CANADA LICENCE EXEMPT RSS STANDARD S OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS 1 THIS DEVICE MAY NOT CAUSE INTERFERENCE AND 2 THIS DEVICE MUST ACCEPT ANY INTERFERENCE INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION OF THE DEVICE LE PRESENT APPAREIL EST CONFORME AUX CNR D INDUSTRIE CANADA APPLICABLES AUX APPAREILS RADIO EXEMPTS DE LICENCE L EXPLOITATION EST AUTORISEE AUX DEUX CONDITIONS SUIVANTES 1 L APPAREIL NE DOIT PAS PRODUIRE DE BROUILLAGE ET 2 L UTILISATEUR DE L APPAREIL DOIT ACCEPTER TOUT BROUILLAGE RADIOELECTRIQUE SUBI MEME SI LE BROUILLAGE EST SUSCEPTIBLE D EN COMPROMETTRE LE FONCTIONNEMENT Caution Changes or modifications not expressly approved by the party responsible for compliance could void the us
20. plugged in toy with liquid Never use more than one adapter The adapter is not a toy Parents should periodically examine the adapter for conditions that may result in the risk of fire electric shock or injury to persons In the event of such conditions the adapter should not be used until properly repaired Caution When not charging the battery or connected to a computer close the USB port cover on the InnoTab MAX for safety Only use the InnoTab MAX Power Adapter and Micro USB cable to charge your device Using a different charger may damage your InnoTab MAX Please note VTech is the only service provider that is authorized to replace the battery on your InnoTab MAX Any attempt to remove or replace the battery by a third party or by yourself may damage your InnoTab MAX and will void your warranty If you feel your battery needs service please contact VTech s Consumer Services Department Technical Support If you have a problem that cannot be solved by using this manual we encourage you to visit us online or contact our Consumer Services Department with any problems and or suggestions that you might have A support representative will be happy to assist you Before requesting support please be ready to provide or include the information below e The name of your product or model number the model number is located on the back of the display panel e The actual problem you are experiencing e T
21. r a factory reset Power off the unit by pressing the power button for 3 seconds and then touch the on screen Power off pop up window Power on the unit again by holding the power button for 3 seconds Make sure not to press the Menu key while turning the power on or Off Make sure the unit is plugged in to a wall outlet using the included USB cable and AC adapter Touch screen is An incompatible Only use your fingers or the inaccurate or it is stylus is being included InnoTab MAX stylus on impossible to select used the screen the correct icon on the screen A cartridge is inserted There is a Remove the cartridge clean it if but the cartridge icon poor cartridge necessary and then re insert it into does not appear on connection the InnoTab MAX the desktop For detailed instructions on cleaning a cartridge please see below The cartridge is Check the InnoTab MAX desktop not compatible for a message saying that the cartridge is not compatible with the InnoTab MAX To view a list of cartridges that are compatible with InnoTab MAX visit http www innotabsoftware com If your InnoTab MAX does not respond to an inserted cartridge please carefully try the following e Turn off the InnoTab MAX and unplug all wiring e Use a cotton swab dipped in rubbing alcohol or an alcohol based window cleaner to gently clean the contact area of the cartridge slot e If necessary dry all the clean con
22. sktop Pop ups will occasionally appear on the InnoTab desktop with recommendations for apps your child might like To turn off these pop ups go to the My Wishes settings in the Parent Account section of Parental Controls My Wishes Settings To access the My Wishes settings go into Parental Controls and select Parent Account Parental Control e2eee The settings are available at the bottom of the screen You can use the My Wishes settings to e Turn the pop up that appears on the InnoTab desktop on or off e Choose whether or not to receive notification e mails when your child makes a wish Yes I would like to receive emails about the latest news from VTech including new produc and special offers My Wishes Settings Playing InnoTab Cartridges on the InnoTab MAX The InnoTab MAX can play most cartridges designed for earlier InnoTab models However because of the InnoTab MAX s larger screen in order to play these older cartridges you must first download updated versions to the tablet To download an updated version of a cartridge make sure your InnoTab MAX is connected to the Internet and then insert the cartridge into the tablet When you touch the cartridge icon on the desktop InnoTab MAX will prompt you to download the updated program Once the program finishes downloading an image of the cartridge will appear at the bottom of the desktop whenever the cartridge is inserted Touch the c
23. tact areas with a soft lint free cloth e Make sure that all parts are completely dry before restoring electricity Static electricity may cause the InnoTab MAX to malfunction In some cases the game play score stored in the tablet memory may be lost In cases where the InnoTab MAX is malfunctioning due to static electricity reset the tablet by pressing and holding the Power button for 10 seconds until the unit turns off Then press and hold the Power button for 3 seconds to turn on the unit again Or if the static electricity malfunction occurred during the downloading process disconnect the USB cable delete the corrupted file and reset the tablet as described above Then reconnect the USB cable and restart the download process For more information and troubleshooting tips visit www vtechkids com tutorials innotabmax Resetting the Tablet to Factory Settings You can reset your tablet to factory settings by following the steps below 1 Make sure the tablet is turned off 2 Hold down the left and up arrows on the d pad and the Help button Qo while turning the power on You will see a screen with the VTech logo Keep holding left up and Help until the Factory Reset screen appears If you are having trouble you can try pressing the d pad diagonally between the left and up arrows instead of pressing both the left and up arrows individually 3 A message will appear asking you to confirm that you want to reset the tablet to fa
24. ure System Status Built in Apps Learning Lodge Cartridge Downloads Kid Connect Profile Picture Touch this image or press the menu button next to the screen to switch profiles or go to Parental Controls Cartridge Touch this image to play an inserted InnoTab cartridge System Status Shows the time Wi Fi status and battery power Built in Apps There are many built in apps including games media players tools and shelves Flick left or right to see more Learning Lodge Download more content from VTech s online store Kid Connect With this app your child can send text messages voice messages photos and more to your smartphone Downloads Find all the apps downloaded from Learning Lodge here VTech Kid Connect VTech Kid Connect allows you to share text messages voice messages photos drawings and stickers between your InnoTab MAX and a smartphone or tablet Getting Started 1 Make sure your child s InnoTab MAX is registered During registration you and your child will both receive a Kid Connect ID This is a unique username that helps identify people on the network See the Register Now section for more information about registration Download and install the Kid Connect app on your mobile device It can be found at the App Store for iPhone or the Google Play Store for Android Kid Connect works with iPhone4 or above iOS5 x or above Android 2 3 3 or above minimum r
25. vtech INNOTAB MIAD Register Now Register your InnoTab MAX to receive e A one year limited warranty e Two FREE VTech downloads e One Toca Boca bonus app 1 CHARGE your InnoTab MAX using the included USB cable and adapter A green light will turn on to indicate charging is in progress The light will turn off when the tablet is fully charged A full charge takes about 4 5 hours 2 SET the date and time and establish a Wi Fi connection Touch the check mark when the Wi Fi setup is done 3 REGISTER your InnoTab MAX by creating a Parent Account and assigning Kid Connect IDs for yourself and your child Then choose one Toca Boca bonus app 4 BROWSE the Learning Lodge and select an additional two free VTech apps to download 5 PLAY LEARN amp CONNECT Have fun with your InnoTab MAX 1 Please see the Warranty Sheet for details 2 The battery should be fully charged before the first use See the Charging the Tablet section for details 3 Firmware update may be required before registration 4 For first time registration and designated content only Key Features Microphone Rotating Camera Volume Buttons Charging Light Power Button Menu Button Back Button Help Button Home Button D Pad Capacitive Touch Screen Cover Lock Sliding WA A Switches Handle Headphone Jack 4 Mini HDMI gt Port Micro USB Charger 4 Port Stylus amp Stylus micro
Download Pdf Manuals
Related Search