Home

User Guide

image

Contents

1. Ltd Email support oricom com au Unit 1 4 Sovereign Place Phone 1300 889 785 South Windsor NSW 2756 Web www oricom com au Australia Fax 02 4574 8898 Monday to Friday 8am to 69m AEST aaron
2. expenses incurred including postage delivery freight transportation or insurance of the product to return the faulty product to us however we will arrange delivery of the repaired or replaced faulty product to you Important Information Repair Notice Please be aware that the repair of your goods may result in the loss of any user generated data such as stored telephone numbers text messages and contact information Please ensure that you have made a copy of any data saved on your goods before sending for repair Please also be aware that goods presented for repair may be replaced by refurbished goods or parts of the same type rather than being repaired Warranty Information Australia This Warranty is provided by Oricom International Pty Ltd ABN 46 086 116 369 Unit 1 4 Sovereign Place South Windsor NSW 2756 herein after referred to as Oricom Oricom makes no other warranties or conditions express or implied including as to acceptable quality and fitness for a particular purpose except as stated in this Warranty Any implied warranties that may be imposed by law are limited in duration to the Warranty Period Oricom warrants that the product is free from defects in materials or workmanship during the Warranty Period This Warranty does not extend to any product from which the serial number has been removed or was purchased outside of Australia This warranty in no way affects your statutory warranty rights unde
3. Amplified Wireless Television Listening Device e Keep this user guide for future reference Always retain your proof of purchase in case of warranty service and reister your product on line at www oricom com au Introduction The Oricom Digital TV Listener is an amplification system specifically designed for people with hearing difficulties It can be used with all kinds of Audio Television systems suitable for individuals or groups without any interference Audio output from a TV or audio device is encoded and transmitted by the Base the wireless Headset receives the signal and decodes it to original audio sound One Base can be paired with up to 4 Headsets A Safety amp Care advice To make the best use of this product and to use it safely please read these instructions thoroughly before use and keep safe for future reference Warning This product can be very loud Take care to prevent others from using this product if they do not have the same level of hearing loss Excessive sound pressure from earphones and headphones can cause hearing loss Caution Electric shock DO NOT insert unattached plug heads in to mains power sockets Plug heads MUST be fitted to the power adaptor Electrical connection The unit is designed to operate from a 100 240VAC 50 60Hz supply Classified as hazardous voltage according to EN 60950 standard The unit does not incorporate an integral power on off switch To d
4. d other audio equipment There are a number of alternative methods of connecting to the unit depending on the make of TV HiFi equipment Important The Base MUST connect to OUTPUT sockets on the TV HiFi equipment never use the INPUT access sockets Important f you are using cable TV satellite Internet or other services in conjunction with your TV or sound device please ensure that you connect the TV7300 to an audio output access on your TV and NOT on your set top box If you are unsure or cannot identify the right connection or the input output definition please refer to the user manual of your TV A connection of the TV7300 to your set top box instead of your TV output could result some channels being seen without sound Please note In the event of having difficulty with the connections please call the Customer Helpline 1300 889 785 Using 3 5mm to 3 5mm cable Insert Using 3 5mm to RCA cable Insert one 3 5mm jack 8 into Audio socket 3 5mm jack 8 into 3 5mm RCA cable on Base insert other 3 5mm jack into 10 Connect to the RCA jacks 10 to the headphone socket on the TV HiFi the corresponding red and white equipment If required use 3 5mm to OUTPUT sockets on the TV HiFi 6 3mm jack adaptor 9 equipment Using scart adaptor Insert 3 5mm jack 8 into 3 5mm to RCA cable 10 Insert scart adaptor 11 into a compatible scart socket on the TV HiFi equipm
5. ent Connect to corresponding red and white RCA jacks 10 to scart adaptor do not use the yellow socket Note Some televisions and audio devices have an audio output SCART level greater than the 300mV standard This can cause some distortion or a very high acoustic level even with the Volume set to Low If this happens please contact the Oricom Customer Services department They will be able to provide you with a solution to attenuate the sensitivity of your TV7300 Microphone connection Only use the supplied Oricom microphone Plug microphone jack 12 into MIC socket on Base and place microphone near source you wish to listen to Note Volume levels will be lower and background noise may be picked up when using the microphone Using Headset Once charged and Volume adjustment connected to your TV HiFi equipment open the arms and Headset will operate A green light on the Headset will show it is in use Headset beeps when volume reaches maximum or minimum Press button to increase volume and button to decrease volume Headset will switch off when arms are fully released Headset adjustments Volume Balance Tone and Mono Stereo settings are preset to their middle settings these will be suitable for the majority of users Ensure that you try the Headset before adjusting the preset settings If adjustments are required use the slider tool to adjus
6. he retailer where you made your purchase Important Please retain your purchase receipt and attach to the back page of your user guide as you will need to produce this if warranty service is required Take a few moments to register your product online www oricom com au How to make a claim under Warranty in Australia Oricom has a simple warranty process for you to follow e Please call or email our Customer Support Team contact details follow e ACustomer Support Team member will verify after troubleshooting with you if your product qualifies under warranty If so they will give you a Product Return Authorisation number e We will then email or fax a Return Authorisation form and a Repair Notice if necessary together with instructions on how to return the goods for warranty service Please note that if a Customer Support Team member advises that your product does not qualify for return this warranty does not apply to your product Products that are authorised to be returned to Oricom in Australia must include all of the following e Acompleted Return Authorisation form e A copy of your Proof of Purchase please keep your original copy e The faulty product including all accessories Send the approved returns to Oricom International Pty Ltd Locked Bag 658 South Windsor NSW 2756 Australia 14 Please note that this warranty excludes expenses incurred by you in returning any faulty product to us You must arrange and pay any
7. isconnect the power either switch off supply at the mains power socket or unplug the AC adaptor When installing the unit ensure that the mains power socket is readily accessible Caution Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions Keep the unit away from heat sources DO NOT expose the unit to direct sunlight Clean the Headset and ear pads regularly DO NOT modify the unit in any way Please note The unit may be subject to interference from appliances that generate strong electrical or magnetic fields e g microwaves mobile phones lighting transformers etc 1 Pack Contents Headset Alternative ear pads Base Power adaptor with cable 1 5m AUS UK EU amp US Slider tool Batteries 3 5mm to 3 5mm cable 3 5mm to 6 3mm adaptor 1 5m 3 5mm to 2 pin RCA cable 10 2 pin RCA scart adaptor 25cm Microphone Table of Contents Pack contents 2 Pairing extra headsets 11 12 First use Charging batteries 3 5 Cleaning amp Maintenance 12 Connecting to TV HiFi and other Spare replacement parts 13 audio equipment 6 8 Using Headset 8 10 Customer support 13 Headset adjustments 8 10 General information 13 14 Battery status amp recharging 10 11 2 First use Charging batteries Important The Oricom Digital TV Listener is supplied with two batteries Before use batteries MUST be fully charged full charge will take about 2 3 hours whe
8. lean with a damp cloth Regularly remove and clean Ear pads with warm soapy water Two types of ear pad are supplied select the most suited to yourself Spare replacement parts Spare parts are available by calling our Support Line 1300 889 785 1 Battery x2 2 Additional Headsets 3 Ear pads both types x 2 General information Specifications Digital 2 4 GHZ AFHSS transmission Adaptive Frequency Hopping CD sound quality 79 channels 20 hopping channels Receiving amplification up to 125dBspl Frequency response 45 15000Hz Operating range outdoors up to 100 meters and Indoors up to 25m Continuous usage time up to 3 hours per battery Charged when you need it Headset recharges itself when placed back into Base unit Base unit has a charging port for the extra battery 3 5mm audio input stereo jack access in Base unit 2 5mm microphone input jack access in Base unit Weight 50g Customer Support If you have any problems setting up or using this product you will find useful tips and information in the Troubleshooting section of this user guide as well as Frequently Asked Questions on our website www oricom com au If you have further questions about using the product after reviewing the resources above or would like to purchase replacement parts or accessories please call our Customer Support Team Our dedicated local support team are more likely to be able to help you than t
9. n the battery is empty Caution lf battery is already fully charged the red LED will stay off Once fully charged the TV Listener has an approximate operating time of up to 3 hours per battery with Headset on medium volume Batteries cannot be overcharged but to save power the Base should be disconnected from the power supply when not in use A Battery Warnings DO NOT attempt to dismantle DO NOT dispose of in fire DO NOT swallow Keep away from children Batteries are to be inserted with the correct polarity DO NOT short circuit the supply terminals Exhausted batteries are to be removed from the product Only use Oricom supplied Li Po batteries Caution Risk of explosion if battery is replaced incorrectly or fitted with the wrong type of battery Dispose of used batteries according to the instructions Connect Multi input adaptor Select the Australian power plug and connect to the socket on the ac adaptor Insert power adaptor into mains power socket Insert power jack 7 into DC IN 5V socket on the back of the Base Insert batteries 6 into Headset and Base Place Headset in Base Caution Please be sure to insert the battery correctly see above Turn power on at mains and Base Red lights will show on Base and Headset to indicate batteries are charging After 2 3 hours when fully charged the red lights will be off Connecting to TV HiFi an
10. ou with a replacement product of its choosing that is at least equivalent to your product in performance Oricom does not warrant that the operation of the product will be uninterrupted or error free Oricom is not responsible for damage that occurs as a result of your failure to follow the instructions that came with the product These terms and conditions together with any specific terms and conditions contained in the user guide to the product purchased constitute the complete and exclusive agreement between you and Oricom regarding the product No change to the conditions of this Warranty is valid unless it is made in writing and signed by an authorised representative of Oricom Oricom will not be in breach of a warranty expressly set out in this User Guide or under the Competition and Consumer Act 2010 and excludes any liability for damages or any other remedy arising under any other legislation or the common law if the damage occurs as a result of 1 failure by you to adhere to the warnings and follow the instructions set out in this user guide for the proper installation and use of the product 2 negligence on your part or misuse by you of the product 3 an uncontrollable external cause which results in the product not functioning including but not limited to power failure lightning or over voltage and 4 modification to the product or services carried out on the product by anyone other than Oricom or Oricom s authorised service p
11. r the Competition and Consumer Act 2010 or any other similar legislation The warranty period will be from the date of purchase of the product evidenced by your dated sales receipt You are required to provide proof of purchase as a condition of receiving warranty services You are entitled to a replacement product or repair of the product according to the terms and conditions of this document if your product is found to be faulty within the Warranty Period This Warranty extends to the original purchaser only and is not transferable Rechargeable battery cells and rechargeable battery packs if 15 supplied with this product are covered under this warranty for a period of 90 days Products distributed by Oricom are manufactured using new materials or new and used materials equivalent to new in performance and reliability Spare parts may be new or equivalent to new Spare parts are warranted to be free from defects in material or workmanship for thirty 30 days or for the remainder of the Warranty Period of the Oricom branded product in which they are installed whichever is longer During the Warranty Period Oricom will where possible repair and if not replace the faulty product or part thereof All component parts removed under this Warranty become the property of Oricom In the unlikely event that your Oricom product has a recurring failure Oricom may subject to the Competition and Consumer Act 2010 at its discretion elect to provide y
12. reble Headset beeps when tone adjustment reaches maximum middle or minimum Battery status amp recharging When battery power is low Headset green light will flash and a low beep will be heard through Headset Charging battery in Base Insert battery into Base charging compartment and switch on power During charging the red light will stay lit until fully charged Charging battery in Headset Insert battery into headset place Headset in Base During charging the red light on Headset will stay lit until fully charged Pairing extra Headsets Note Up to 4 Headsets can be paired to each Base Important Pairing must be completed while Base lights are flashing If lights stop flashing before pairing is complete you must repeat the process To pair Base and Headset ensure batteries are fully charged and the Base is connected to mains power Proceed as follows 11 Base Switch power off at Base Press and hold down CH button switch power back on continue to hold CH button until both lights on the front start flashing Base is ready for pairing Oq S Headset Press and hold down the minus button While holding the button open arms and the green indicator lights up When light starts flashing pairing is complete Cleaning amp Maintenance Note DO NOT use alcohol chemical or spirit based cleaning agents Wipe Base and Headset c
13. rovider Oricom will not be liable for any damages caused by the product or the failure of the product to perform including any lost profits or savings or special incidental or consequential damages Oricom is not liable for any claim made by a third party or made by you on behalf of a third party This limitation of liability applies 16 whether damages are sought or a claim made under this Warranty or as a tort claim including negligence and strict product liability a contract claim or any other claim However this limitation of liability will not apply to claims for personal injury Nothing in this Warranty excludes restricts or modifies any condition warranty right or remedy which pursuant to the Competition and Consumer Act 2010 applies to this Warranty and which may not be so excluded restricted or modified For warranties that cannot be excluded restricted or modified Oricom limits the remedies available to those specified in the relevant legislation Oricom products come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure Contact details for Oricom Support and Warranty Claims in Australia Oricom International Pty
14. t the settings Important Once all the adjustments are complete ensure that the Headset slider is set to the Volume adjustment as shown in diagram 11 Volume adjustment Set BAL VOL slider to VOL Set T lt gt B V slider to B V Press button to increase volume and button to decrease volume Headset beeps when volume reaches maximum or minimum Use the slider tool Item 5 page 2 to adjust the Volume Balance Tone or switch Mono to Stereo Open the back panel on the Headset 3 slider switches will be present Balance adjustment Set BAL VOL slider to BAL Set T lt gt B V slider to B V Press button to decrease sound on RIGHT side Press button to decrease sound on LEFT side Headset beeps when balance reaches maximum middle or minimum Tone adjustment Mono Stereo adjustment Set BAL VOL slider to VOL Set MS slider to S Headset will be in Set T lt gt B V slider to T Stereo Press button to increase treble and Set MS slider to M Headset will be in decrease bass Press button to Mono increase base and decrease t

Download Pdf Manuals

image

Related Search

Related Contents

Perfil CELSA  K 4 Compact - Migros  Philips Sonicare e-Series HX7011  User Manual - Sundance Multiprocessor Technology Ltd.  KAWASAKI ZZR1400 06-11  Glen Dimplex Home Appliances Ltd 82757900 User's Manual    Manual de Instalação - Documentação técnica  L`insert de cheminée à bois harman 300i  Kenwood KAC-929 Car Stereo System User Manual  

Copyright © All rights reserved.
Failed to retrieve file