User Manual - B&H Photo Video Digital Cameras, Photography
Contents
1. s manual Note The FreeWave Flash Trigger LR receiver can be used with the Vello Captain TTL system when using Channel 1 4 15 CONNECTING THE RECEIVER TO A STUDIO FLASH 1 Turn off the Studio light and the 4 Confirm that your camera transmitter FreeWave Flash Trigger LR receiver and studio flash are all powered on 2 Using the included 3 5 mm sync cable 5 Fully press the shutter release button attach one end to the receiver s flash on your camera All lights connected socket and the other end to your to receivers in the currently selected studio flash For flashes with a 1 4 channel will fire simultaneously monoplug socket use the included 3 5 mm to 1 4 monoplug adapter 6 The transmitter and receiver LED confirmation lights will illuminate red NOTE For studio flashes with household plugs a 3 5 mm to household adapter is available separately NOTE One transmitter will trigger multiple receivers connected to different flashes as long as they are 3 Set the same channel on both on the same channel or with the FreeWave Flash the transmitter and receiver Trigger LR Transmitter set to ALL channels 16 SPECIFICATIONS Frequency Range 600 feet 183 meters approx Channels Transmitter Dimensions 1 3 x 1 9 x 4 3 4 x 4 9 x 10 2 cm Receiver Dimensions 1 5 x 1 9 x 3 4 3 9 x 4 9 x 8 7 cm Transmitter Weight 2 4 oz 68 g Receiver Weight 2 3 oz 65 2 g FCC COMPLIANCE This d2. more information or to arrange service visit www vellogear com or call Customer Service at 212 594 2353 Product warranty provided by the Gradus Group VELLO www gradusgroup com A Gradus Group Brand G Vello is a registered trademark of the Gradus Group 2014 Gradus Group LLC All Rights Reserved www vellogear com Copyright 2014 Gradus Group GG1
3. on back Channel up selector button On Off switch Tightening ring SS Hot shoe foot LED confirmation light Battery compartment Channel down A selector button Channel ss indicator panel o On Off switch Channel up y selector button 3 5 mm flash 5V input output port Lanyard loop Hot shoe Cold shoe mount mount 1 4 20 threaded socket INSTALLING THE BATTERIES amp TURNING ON THE DEVICE The Vello FreeWave Flash Trigger LR transmitter and receiver each take two AA batteries To install the batteries simply remove the battery compartment door on the back of each unit With the door removed insert the batteries using the correct polarity as displayed within the SLUSH EI compartment Once secured reinstall the battery compartment doors To turn on the Vello FreeWave Flash Trigger LR transmitter or receiver simply slide the on off switch to the on position Reverse this step to turn the device off 10 SETTING THE CHANNELS The Vello FreeWave Flash Trigger LR transmitter and receiver can communicate via your choice of eight different channels To change the channel on the transmitter or receiver turn on the device and press the up or down channel selector button until the desired channel appears on the channel indicator panel The transmitter can be set to trigger all of the units connected to Vello FreeWave Flash Trigger LR recei
4. 2 4 GHz signal Reduced interference and improved wireless signal strength 8 digital channels Avoids interference from other wireless remote controls All trigger mode Can fire all channels at once Low profile construction Tilting joint reduces transmitter s on camera presence Hot shoe and studio flash use Compatible with most flashes Internal antenna Embedded antenna reduces unit size Compatible with the Vello Captain TTL transmitter Ch 1 4 Receiver can be triggered via Vello Captain TTL Transmitter COMPATIBLE DEVICES The Vello FreeWave Flash Trigger LR transmitter and receiver is compatible with most hot shoe and lights studio lights The Vello FreeWave Flash Trigger LR does not transmit through the lens TTL settings therefore we recommend using a fully manually controlled hot shoe flash with this device The power output must always be set manually Most flashes that can be operated manually are compatible except Pentax Sony Minolta and Sony Multi Interface flashes The Vello Flash Trigger LR Receiver is also compatible with the Vello Captain TTL transmitter channels 1 4 PRECAUTIONS e Please read and follow these instructions and keep this manual in a safe place e There are no user serviceable parts inside the devices Do not attempt to disassemble or perform any unauthorized modification e Do not operate the transmitter or receiver in the presence of flammable gas or vapors e Do no
5. FREEWAVE FLASH TRIGGER LR USER MANUAL 3 6 y NZP RR SR VELLO Ny on INTRODUCTION Thank you for choosing Vello The Vello FreeWave Flash Trigger LR is an 8 channel extended range wireless flash trigger With digital circuitry This device uses a powerful 2 4 GHz radio signal maximizing your photographic potential by extending the signal strength With an extended range of up to 600 ft 183 meters you can use the Vello FreeWave Flash Trigger LR confidently in nearly all photography settings The wireless signal empowers you to trigger your hot shoe or studio flash units without a line of sight view making it easier to set up wireless connections separated by a barrier Multiple triggering modes enable you to fire all channels simultaneously or separate your receivers into separate channels With a 1 250 sec sync speed the Vello FreeWave Flash Trigger LR s transmitter and receiver are easy to set up and use The wireless capabilities and embedded antenna eliminate clutter and the transmitter s ability to tilt makes it very compact while being used on camera Transmitter Receiver 4x AA batteries 3 5 to 3 5 mm sync cable 3 5 mm to 1 4 monoplug adapter 2x lanyards Pouch Case User manual BOX CONTENTS Receiver 2x AA batteries 3 5 to 3 5 mm sync cable 3 5 mm to 1 4 monoplug adapter 1x lanyard User manual FEATURES Extended Range Up to 600 feet 183 m Powerful
6. Flash To mount your hot shoe flash to the receiver slide the foot of the hot shoe flash into the receiver s hot shoe mount Secure the flash to the hot shoe mount 13 CONNECTING THE RECEIVER TO A HOT SHOE FLASH 1 With your hot shoe flash unit 6 Confirm that your camera transmitter turned off switch the flash s locking receiver and hot shoe flash are all switch to the unlock position powered on 2 Insert the hot shoe flash s hot shoe foot 7 Fully press the shutter button on into the receiver s hot shoe mount your camera to capture an image All lights connected to receivers in the 3 Switch the hot shoe flash s locking currently selected channel will fire switch to the locked position to simultaneously If you selected ALL secure it to the receiver channels on the transmitter then all receivers regardless of their channel 4 Turn on the hot shoe flash and selection will fire simultaneously the Flash Trigger LR Receiver 8 The transmitter and receiver LED 5 Set the same channel on the confirmation lights will illuminate red transmitter and receiver units 14 Note We recommend using a fully manual controlled flash with this device Since the FreeWave Flash Trigger LR does not transmit TTL settings you will need to set the power output of your flash manually Note Your flash unit may enter sleep mode after a period of non use To turn off your flash s sleep mode refer to the device
7. erials and workmanship under normal consumer use for a period of one 1 year from the original purchase date or thirty 30 days after replacement whichever occurs later The warranty provider s responsibility with respect to this limited warranty shall be limited solely to repair or replacement at the provider s discretion of any product that fails during normal use of this product in its intended manner and in its intended environment Inoperability of the product or part s shall be determined by the warranty provider If the product has been discontinued the warranty provider reserves the right to replace it with a model of equivalent quality and function This warranty does not cover damage or defect caused by misuse neglect accident alteration abuse improper installation or maintenance EXCEPT AS PROVIDED HEREIN THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE This warranty provides you with specific legal rights and you may also have additional rights that vary from state to state To obtain warranty coverage contact the Vello Customer Service Department to obtain a return merchandise authorization RMA number and return the defective product to Vello along with the RMA number and proof of purchase Shipment of the defective product is at the purchaser s own risk and expense For
8. evice complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation 17 TROUBLESHOOTING Check that channels on all communicating devices are identical When turning on the unit it is important to review and if necessary reset the channel selection If first choice of channel does not work try a different channel until you find one that works If you encounter any signal interference try changing the channel Ensure that all connections are attached firmly and all cables are installed correctly Make sure that the power source for each device is properly installed and carry a sufficient charge Weak batteries can reduce the distance over which a transmission works 18 Make sure that a communication confirmation appears on the LED indicator when sending or receiving a signal Verify that flash and camera equipment are operating properly Check for a stuck test button on all units including flash devices Make sure the devices are within the maximum operating distance of up to 600 feet 183 meters Disable sleep mode on your flash to prevent it from turning off after a period of not being used ONE YEAR LIMITED WARRANTY This Vello product is warranted to the original purchaser to be free from defects in mat
9. t handle with wet hands or immerse in or expose to water or rain Failure to observe this precaution could result in fire or electric shock Keep out of reach of children This device contains small parts which may pose a choking hazard Observe caution when handling batteries Batteries may leak or explode if improperly handled Use only the batteries listed in this manual Make certain to align the battery with the correct polarity Batteries are prone to leakage when fully discharged To avoid damage to the product be sure to remove the batteries when leaving the product unattended for prolonged periods or when no charge remains Handle the units with care Do not use or leave the devices in conditions of extreme heat severe cold or high humidity Turn off the power of the camera and studio flash before inserting or removing the remote Dispose of used batteries packaging and old devices in accordance to appropriate local environmental regulations Clean the unit with a soft dry cloth Make sure the item is intact and that there are no missing parts All photos are for illustrative purposes only OVERVIEW LED confirmation light Lanyard loop Channel indicator panel Channel down selector button All channel selector button Test button Low profile tilt joint a Han 12345678 ae ee ae PRES D Internal antenna Battery compartment
10. vers regardless of the receivers channel selection To activate this function press the all channel selector button To return to individual channel selection on the transmitter press the all channel selector button again and select individual channel desired using the up or down channel selector button 12308678 Note The FreeWave Flash Trigger LR Transmitter and Receiver will remember the channel setting selected even when the unit is turned on off making it easy to return to your selected channel at your next session Note If you encounter any interference on the initial setting try changing the channel 11 MOUNTING THE TRANSMITTER To wirelessly trigger your flash device using the Vello FreeWave Flash Trigger LR with the camera and Flash Trigger LR powered off mount the transmitter on the camera s hot shoe by sliding the transmitter s hot shoe foot into the camera s hot shoe mount Turn the transmitter s tightening ring to secure the device to the camera Tilt the transmitter to achieve a low profile mounting Select the desired channel on the Transmitter using the channel selector buttons 12 MOUNTING THE RECEIVER Note Make sure your flash and Flash Trigger LR are turned off before mounting Mount the receiver to your tripod or stand via one of the two provided mounting options 1 Threaded socket for a standard 1 4 screw mount 2 Accessory shoe cold shoe foot Mounting a Hot Shoe
Download Pdf Manuals
Related Search