Home

User`s Manual

image

Contents

1. Use the arrow keys to move a between options in the menus gt w Press to enter your choice or GO setting Press the yellow button then 2 a to bring up the status display 2 menu Press 2 again to change to the next display Press 2 a third time to remove the status display Press the yellow button then 3 az to bring up the DVD setup menu 3 This is described to the right Press the yellow button then 4 a to zoom in on the picture Press 4 4 to increase the zoom factor Press 4 a third time to exit the zoom feature Press the yellow button then 5 to bring up the camera angle 5 menu Press 5 to switch between the available options When you have made your selection the menu disappears However if you have switched on the angle indicator in the disc setup menu the icon remains on the screen Not all discs contain a top menu amp Play Mode Disc Navigator Q Initial Settings How to use the DVD menus gt Press the yellow button then 3 to bring up the DVD main menu gt Press 44 or gt to move to the menu you wish to enter and press GO gt Use the arrow keys 44 gt a and w to move between menus and settings gt Press GO to store your choice gt Press EXIT to leave on screen menus NOTE This DVD player is set for the appropriate region from the factory Discs from incompatible regions will not play on this player A Start Point B End Poi
2. Letter Box the film is shown with black bars at the top and bottom of the screen Component Out Do not change unless you change AV Connector Out setting to Video AV Connector Out Set for best quality RGB Language The language menu allows you to store your preferred language for audio subtitle and the disc menu and to decide whether or not available subtitles should be shown during playback If the languages you choose in this menu are available on the loaded disc they will be used Some DVDs will require you to choose a subtitle language from a disc menu even if you have previously selected a default subtitle language from the Language menu Display The display menu allows you to select the language of the DVD player menus to decide whether or not operation displays should be shown on the screen and whether the angle indicator should be shown The angle indicator is only available if the disc contains the alternate camera angle feature Options Some DVDs feature a Parental Lock level If you specify a level lower that the one contained on the disc the disc will not play unless your pincode is entered Some discs also support the Country Code feature This means that the player does not play certain scenes on a disc depending on the Country Code and the Parental Lock level you set Before you can set the Parental Lock level or the Country Code you must enter a pincode You can change the pincode at
3. and activates the appropriate speakers Surround sound and Home cinema Select speakers for movie sound You can select the speaker combination that suits the source you are using provided that the various sound modes are available in your system Press repeatedly to display LIST SPEAKER on Beo4 SPEAKER Press the number of the speaker 1 5 combination you want The selected speakers cut in automatically Press to adjust the balance a between the front and rear v speakers Press to adjust the balance between the left and right speakers Press to remove SPEAKER from EXIT the Beo4 display and to return to the source you were using NOTE For further information about how to connect speakers to the television refer to the chapter Loudspeaker setup surround sound on page 42 in the Reference book Speaker combinations SPEAKER 1 Sound in the centre speaker only SPEAKER 2 Stereo sound in the two front speakers The BeoLab 2 subwoofer is active SPEAKER 3 The centre speaker front speakers and the BeoLab 2 subwoofer are active SPEAKER 4 Enhanced stereo sound in the front and rear speakers The BeoLab 2 subwoofer is active SPEAKER 5 Surround sound from all speakers including the BeoLab 2 subwoofer For programmes encoded in Surround Sound If you have added only two front speakers to the television you will only be able to choose SPEAKER 1 3 Picture
4. is activated it starts in dual screen mode You can then choose full screen instead The teletext mode is remembered the next time you switch on teletext PAGE PROGRAM HALT REC SETUP REVEAL 0 P100 1 Te 100 Wed 18 SEP 12 39 32 PAGE PROGRAM HALT REC SETUP REVEAL P100 B J ie 100 Wed 13 Oct 12 39 34 To change viewing mode gt Press TEXT to bring up teletext gt Press TEXT again to switch between full screen and dual screen gt Press EXIT to leave teletext MEMO pages and subtitles are not available when watching teletext in dual screen mode 13 14 If you have stored a lot of television programs and want to get to your favourites quickly without going through the list each time place them in a Group You no longer need to step through programs you do not use Name the Groups after the people who watch them Dad or Mary or according to the types of programs included like News or Sports When you have created and selected a particular Group you only step through the TV programs belonging to this particular Group Switch to a different Group to watch a different set of programs or switch from GROUPS to TV to see all the tuned TV programs Use Groups Select programs in a Group You can gain access to your Groups by activating Groups mode Press the arrow buttons to select the Group you are looking for then step through the programs in this Group Press
5. pincode IMPORTANT If you are prompted for a pincode the first time you switch on your television contact your Bang amp Olufsen retailer When your television is switched on gt Enter the code digits using the number buttons orav gt Press GO when the last digit is entered gt Your television starts up again Five incorrect entries will cause the television to shut down for three hours during which operation is not possible If you have forgotten your pincode gt Contact a Bang amp Olufsen retailer to receive a five digit mastercode gt When the television prompts you for your pincode press and hold to bring up the MASTERCODE menu gt Entering the code digits using the number buttons or w and pressing GO will deactivate your pincode and reactivate your television To use the pincode system again gt Follow the procedure for activating the pincode system 23 24 Regular maintenance such as cleaning the television is the responsibility of the user To achieve the best result follow the instructions to the right Contact your Bang amp Olufsen retailer to determine recommendations for regular maintenance Any defective parts are covered by the guarantee during the warranty period Maintenance of your television Cleaning Cabinet surfaces Wipe dust off the surfaces using a dry soft cloth Remove grease stains or persistent dirt with a soft lint free firmly
6. to name anew Group gt Press or w to select characters gt Press dor to move to the previous or next character space gt Press GO to store the name and press GO again to be able to copy programs into the new Group gt Press a or w to find a program you wish to copy to the new Group gt Press to copy a TV program to your Group gt Press GO to store your Group when you have finished copying programs gt Press STOP to back up through previous menus or press EXIT to exit all menus Move programs within a Group You can rearrange the order in which your programs appear within a Group and delete programs in a Group DR1 DR2 TV2 BBC CNN ZDF RTL7 EUROSPRT select 4 group 13 gt Press TV to switch on the television gt Press MENU to bring up the TV SETUP menu PROGRAM GROUPS is already highlighted gt Press GO to bring up the PROGRAM GROUPS menu gt Press w to highlight a Group and press GO to select it gt Press w to highlight the program you wish to move or delete gt Press gt to move the program out of the list and press or w to move it to the new position gt Press 44 to move the program back into the list or press the yellow button to delete it When you delete a program in the list the remaining programs contract gt If the program changed places with another program then move this program to a new position gt When you finish movi
7. to use the teletext functions of your television for example MEMO pages Use Groups 14 How to use the Groups function in your television and create groups of favourite programs Use the DVD player 76 How to operate the daily functions of the DVD player and call up on screen menus The pincode system 22 How to utilise the pincode system of your television Maintenance 24 How to clean your television and change batteries in the Beo4 remote control The Beo4 remote control gives you access to all functions When a function is in use you are informed via displays on Beo4 or on the television Switch on the television Switch on digital satellite TV if your television is equipped with a digital satellite module or switch on a connected set top box Switch on DVD and play a loaded disc Select programs teletext pages track numbers and DVD chapters Enter data in on screen menus Enter information in on screen menus Press or gt gt while TV is on to select a program Group you have created Cue back and forth during playback of a DVD Accept and store instructions or settings Press and hold to call up a program list Start disc playback Step up or down through programs or menu items Step between chapters or tracks on a disc Reveal additional functions in the Beo4 display such as FORMAT Introducing BeoVision 7 and Beo4 TV TV FORMAT DTV MENU V MEM RECORD A MEM DVD TEXT 0 9 a E GO STO
8. 00 NOTE If your television is linked via a BeoLink cable to another television stored MEMO pages are not shared among these televisions MEMO pages must be stored manually on each linked television To move to another teletext service gt Press b gt to move the highlighted cursor to PROGRAM If MEMO pages have been created MEMO is highlighted when you switch on teletext Press a or w while MEMO is highlighted to find PROGRAM gt Press GO to bring up a program list gt Press a or w to find a desired program gt Press GO to switch to another teletext service To stop subpages from turning gt Press STOP to stop subpages from turning or gt move the cursor to HALT and press GO HALT is replaced by a set of four digits gt Use w and a to step to the subpage you wish to see OF x gt enter its number using the number buttons on Beo4 gt Press GO to restart page turning To reveal hidden messages and the like gt Press b gt to move the highlighted cursor to REVEAL gt Press GO to reveal hidden text on the current page Store favourite teletext pages Nine MEMO pages are available for each television program s teletext service PAGE MEMO1 HALT REC SETUP REVEAL PAGE MEMO2 HALT REC SETUP REVEAL P100 BBC S100 Wed 13 Oct 12 39 34 To create a MEMO page gt Bring up a page you view often gt Press dor to move the cursor along the menu bar to SETUP and p
9. 8 DVD menu To get a quick overview of the DVD menus you can bring up an overlay on the TV screen Press to switch on DVD Press to bring up the DVD menu overlay Press one of the coloured buttons to activate a function press the number button that activates the function you want When DVD is selected as source press MENU twice to bring up the television s main menu DVD MENU gt gt Use the DVD player AUDIO SUBTITLE SHIFT DISC MENU TOP MENU DVD DISPLAY DVD SETUP ZOOM ANGLE The menu overlay helps you remember the DVD functions however you can call up the functions without calling up the overlay first Use DVD on screen menus Press the red button to bring up the audio language menu Press repeatedly to switch between the available options When you have made your selection the menu disappears Press the green button to bring up the subtitle language menu Press repeatedly to switch between the available options When you have made your selection the menu disappears Press the blue button to bring up the disc menu In the disc menus Use the arrow keys to move between options in the menus Press to enter your choice or setting Not all discs have separate subtitle and audio language menus in those cases you must use the main or disc menu GO While DVD is selected Press the yellow button then 1 a to bring up the disc s own top 1 menu
10. AM LINK FREQUENCY ADD PROGRAM contents AUTO TUNING e 1 DR1 2 TV2 SR Information rE field select How to use on screen menus Examples of on screen menus As you highlight Press to switch on the television TV menu options the contents of each option appear in grey below the options Press to bring up the TV SETUP MENU menu Press to move between the different menu options v Press to reveal different settings 4 Press to bring up a menu or store GO a setting you have made Press to step back through STOP previous menus Press to exit all menus EXIT This chapter describes daily use of your television how to switch the television on choose a program and switch the television off In addition it describes two functions that make watching TV easier and more enjoyable The TV list gives you an overview of all your programs and you can also view a list of programs you have placed in a Group If your television is equipped with an optional motorised stand you can turn the television For further information about Groups refer to the chapter Use Groups on page 14 Watch TV Select a TV program When you switch the television on the last program viewed appears on the screen Press to switch on the television TV Press a program number to go 0 9 directly to that program Press to change programs one by one gt 4 Press to switch the television to e standby Pressing O swaps between th
11. BeoVision 7 Guide The Guide and the Reference Book This Guide contains information about the daily use of your Bang amp Olufsen product The Reference book contains information about more advanced operation as well as connecting and operating external equipment it also provides you with an overview of on screen menus We expect your Bang amp Olufsen retailer to deliver install and set up your products However the information required to install and set them up is included in the Reference book This is useful if you move your products or expand your system at a later date Index The Reference book also contains an index which refers to this Guide and the Reference book It can help you find the specific subject you want to know more about An explanation of symbols in the Guide and Reference book Buttons on the Beo4 remote TV control LIST M w Display on the Beo4 remote FORMAT control Contents 3 Introducing your Bang amp Olufsen television 4 Find out how to use the Beo4 remote control and bring up the menus on the screen Watch TV 6 Find out how to operate the daily functions of your television for watching television Adjust sound 8 How to adjust volume and change sound mode See two sources at the same time 9 Find out how to use the dual screen function of your television Surround sound and Home cinema 0 How to turn your system into a Home cinema for watching movies Teletext 72 How
12. P w N LIST Vv EXIT BANG amp OLUFSEN NOTE Alternative subtitle and audio languages are only available on some discs Functions not available on a loaded disc will not be highlighted in on screen menus For information about how to operate connected equipment refer to the Guide enclosed with it For information on how to add extra functions to those shown in the Beo4 display refer to the chapter Customise Beo4 in the Reference book The Beo4 display shows the source you have selected or extra functions available when you press the LIST button Bring up the main menu Switch on teletext Bring up the subtitle language menu for DVD Use with number buttons to bring up DVD menus when watching a DVD Also used to switch between play mode operation and menu mode operation with certain DVDs Bring up the audio language menu for DVD Bring up the DVD disc menu when watching a DVD Stop playback of a disc step back in menus Adjust sound volume press in the middle to mute the sound Exit all on screen menus Switch the television to standby Displayed information and menus Information about the selected source is shown in the display On screen menus allow you to adjust settings E R Menu name o TV E p P PROGRAM E p TUNING TV TUNING Mera Satans TIMER RECORDING EDIT PROGRAMS nal ADD PROGRAM lan AUTO TUNING Ge R An RER I Option e EDIT PROGR
13. TV GO gt 4 GO EXIT TV GO GO Turn the television If you have a motorised stand you can turn the television using your Beo4 remote control _ IR om For further information about how to preset positions for TV viewing refer to the chapter Set positions for the television to turn to on page 22 in the Reference book Press repeatedly to display STAND on Beo4 Press to turn the television to the left or the right or press the number buttons to choose a pre defined position 1 represents the far left position 9 represents the far right position If your television is equipped with a stand with motorised tilt function press to tilt the tele vision up or down LIST STAND gt 4 Several sound adjustment possibilities are available in your television You can adjust the volume or mute the sound completely at any time If programs are broadcasted with different sound types or languages you can choose between the sound types or languages Adjust sound Adjust volume or mute the sound You can adjust volume or mute the sound at any time Press either end of the buttonto A adjust the volume up or down V Press in the middle of the button A to mute the sound V Press either end of the button to A bring the sound back Vv Prolonged listening at high volume levels can cause hearing damag
14. any time If you forget your pincode you must enter the Parental Lock menu and disable the Parental Lock The function is then deactivated This is described on the next page DivX VOD is used for video on demand Use the menu to generate a DivX VOD registration code which you submit to your provider Contact to your DivX VOD provider for further instructions DVD SETUP DVD TIMER RECORDING PLAY TIMER OPTIONS What s on the Disc Navigator menu The Disc Navigator menu allows you to quickly step to specific titles or chapters on a disc DVD SETUP DVD TIMER RECORDING PLAY TIMER PARENTAL LOCK E E 1 1 1 PARENTAL LOCK To disable Parental lock press GO ap 21 To disable the Parental Lock IMPORTANT You must remove the disc from the DVD player and make sure the loader is closed before you disable the Parental Lock gt Press DVD to activate the DVD player gt Press MENU to bring up the DVD SETUP menu gt Press w to move the cursor down to the OPTIONS menu gt Press MENU to reveal the item PARENTAL LOCK gt Press GO to bring up the PARENTAL LOCK menu gt Press GO to disable the Parental Lock or gt press STOP to leave the menu without disabling the Parental Lock gt Press EXIT to leave all menus NOTE When you disable the Parental Lock the DVD player restarts automatically All settings you have made for the DVD playe
15. ards DVD only Press again to stop playback completely or press to resume playback or press a third time to return to the beginning of the disc Some video CDs and super VCDs have PBC menus to bring up this menu press the yellow button then STOP f you stop playback like this the player remembers where you left off on the last 5 discs and resumes playback when you restart STOP gt STOP GO STOP 17 To play other disc formats Your television is designed to play back different disc formats Supported formats are DVD Video Audio CD Video CD CD R RW DVD R RW provided that these are recorded using the DVD Video format and the disc is finalized Discs containing mp3 files are supported if the sampling frequency is set to either 32 44 1 or 48 Khz WMA Windows Media Audio except when protected with DRM Digital Rights Management When playing discs with mp3 or WMA files use a and w to step between tracks and and to wind Press the blue button to bring up a list of the disc content and browse in the content Press EXIT to remove the list JPEG files up to a resolution of 3072 x 2048 When playing discs with JPEG files use the yellow button then 4 and gt gt and to rotate the picture DivX versions 3 4 5 and DivX VOD are supported In general playback of data generated files is only possible if the files are recorded onto a CD R RW 1
16. be wiped clean with a lint free soft dry cloth Always wipe in a straight line from the centre to the edge Avoid extreme heat and humidity and never write on your discs 25 For your information Your needs as a user are given careful consideration during the design and development process of aBang amp Olufsen product and we strive to make our products easy and comfortable to operate Therefore we hope that you will take the time to tell us about your experiences with your Bang amp Olufsen product Anything which you consider important positive or negative may help us in our efforts to refine our products Thank you Write to Bang amp Olufsen a s Customer Service Peter Bangs Vej 15 DK 7600 Struer or call fax Bang amp Olufsen Customer Service 45 96 84 45 25 phone 45 97 85 39 11 fax or email via www bang olufsen com Technical specifications features and the use thereof are subject to change without notice 3507576 0508 Printed in Denmark by Bogtrykkerg rden a s Struer www bang olufsen com
17. e NOTE In order to display SOUND on Beo4 you must first add it to the Beo4 list of functions Refer to the chapter Customise Beo4 on page 58 in the Reference book Sound type or language While you are watching TV you can switch between the types of sound that are available Press repeatedly to display LIST SOUND on Beo4 SOUND Press to bring up the current GO sound type in the display Press GO repeatedly to switch to GO another sound type or language in a multi language programme Press to leave the SOUND EXIT function You can store your favourite sound type when tuning in your TV channels For further information refer to the chapter Edit tuned programs on page 16 in the Reference book Your Beo4 remote control gives you access to a dual screen function for viewing two video sources at the same time For example you can view a video tape playback and a TV programme at the same time provided that the selected sources are available in your system While watching a programme or recording you can divide the screen between the current programme or recording picture A in the second illustration and a new programme or recording picture B You can also swap the two pictures at any time Volume adjustment with Beo4 always affects picture A while other Beo4 operations such as selecting programs affect picture B Choosing a new source cancels dual screen viewing See two sources at the sam
18. e current TV program and previous TV program NOTE If the screen is overheated black spots may appear in the picture These spots disappear again once the television cools down to normal temperature Bring up a program list All your TV programs appear on a list which you can bring up on the screen The list contains program numbers and names and can contain up to 99 TV programs You can also bring up a program list for Groups of programs TV PROGRAM LIST DR2 select The program list for TV is now called up It provides you with an overview of all your available TV programs DR1 DR2 TV2 BBC CNN ZDF RTL7 EUROSPRT 44 group select Group list TV programs selected for a Group also appear in the program lists for all tuned TV programs Press to switch on the television Press and hold to bring up a program list on the screen Press 44 or to step between pages in the program list To select a program enter the program number or press until the desired program is highlighted Press to switch on the chosen program or press to leave the menu Bring up the program list for a specific Group Press to switch on the television Press 44 or gt gt repeatedly to step through your Groups Press to bring up the chosen Group Press and hold to bring up the program list for this Group Press or to see the program lists for the other Groups
19. e time 9 To view a source registered in the Connections menu as V AUX such as a set top box press LIST repeatedly until P V AUX is shown in the Beo4 display instead NOTE In order to display P V AUX on Beo4 you must add it to the Beo4 list of functions For further information refer to the chapter Customise Beo4 on page 58 In the Reference book A B While watching for example TV Press repeatedly to display LIST P AND P on Beo4 P AND P Press for example V MEM to V MEM select the source to view on the right side of the screen B Press O to swap the left picture 0 and right picture To leave the dual screen function Press to leave the function and TV return to normal TV viewing Pressing TEXT on Beo4 brings up teletext on the right hand side of the screen for the source shown in picture B If there is no teletext service available for this source the screen turns black 10 You can extend your system into a surround sound system by adding four Bang amp Olufsen loudspeakers and a BeoLab 2 subwoofer When you switch on one of the sources speakers in a surround sound system can be cut in or out depending on what kind of sound suits the source you are using If you connect a projector you can turn your system into aHome cinema When you switch to the Home cinema setup the television switches the picture from its own screen to the projector screen
20. format Your television always ensures you the best possible picture It automatically adapts the picture so that it fills out as much of the screen as possible However you can always choose the format you prefer When you select a format yourself the automatic format selection is deactivated until you switch to a different channel or change source Press repeatedly to display LIST FORMAT on Beo4 FORMAT Press if you want to optimise the GO picture or press the number of the 1 3 desired picture format If you have chosen Format 1 Press 44 or gt to select variations 4 Db of this format If you have chosen Format 1 or Format 2 Press or w to move the a picture up and down v Press to leave the FORMAT EXIT function Picture formats to choose from FORMAT 1 For standard TV pictures Three variations are available 4 3 15 9 and Panoramic view for the largest picture FORMAT 2 For letter box pictures When you select FORMAT 2 the picture is automatically adjusted vertically This ensures that program names or subtitles if these appear in the broadcasted picture can be seen FORMAT 3 For genuine 16 9 wide screen pictures FORMAT 3 is usually selected automatically If this is not the case you can select it yourself 11 Switch to Home cinema If a projector is connected you can use your Beo4 remote control and move the picture from the television screen onto a projector screen f
21. ng or deleting programs in a Group press GO to store the Group gt Press STOP to back up through previous menus or press EXIT to exit all menus 16 You can start and stop playback step between chapters and tracks and cue back and forth on a disc Bring up the DVD menus to change for example audio or subtitle language Use the DVD main menu to make your own settings for DVD playback You can always resume playback of the loaded DVD at the point where you left off provided that you have just stopped playback of the DVD by pressing STOP twice not three times Some discs do not register whether the DVD player is in play mode or menu mode when being operated In these few cases you must press the yellow button before sending a command to the player In menus for example you must press the yellow button and then GO to store a selection When playing an audio CD the television screen Is blank Use the DVD player Load and play a disc To load a disc press the load bar below the television screen Place a disc in the loader with the label facing upwards Eight centimetre discs may only be loaded provided with a suitable adaptor Discs of other shapes cannot be played NOTE If the DVD player cannot recognise the format of a loaded disc the disc is ejected and DVD LOAD is shown in the display window This may be due to disc faults such as dust dirt finger prints or scra
22. nt Off A B Repeat What s on the Play Mode menu The Play Mode menu allows you to make selections for playback The following options are available A B Repeat The A B repeat function allows you to specify two points on a disc that form a loop to be played over and over Repeat The repeat function allows you to repeat a title or a chapter on a disc over and over Random The random play function allows you to play titles or chapters on a disc in random order Search Mode The search mode function allows you to search through a disc either by searching for a specific title or chapter or by searching for a moment in elapsed time on a disc 19 20 gt gt Use the DVD player gt Initial Settings Digital Audio Out Dolby Digital Out Dolby Digital Video Output DTS Out DTS Language Display Options What s on the Initial Settings menu The Initial Settings menu enables you to choose your preferred settings for DVD playback Settings in this menu cannot be entered during playback The following options are available Digital Audio Out Choose the sound output for your system Options for Dolby Digital Out are Dolby Digital or Dolby Digital gt PCM stereo Options for DTS Out are DTS and DTS gt PCM stereo Video Output This menu allows you to select a picture format suitable for your television Options are 4 3 Letter Box 4 3 Pan amp Scan and 16 9 Wide In 4 3
23. or a special occasion or movie LIST FORMAT Press repeatedly to display FORMAT on Beo4 Press to switch between Home 0 cinema mode and ordinary TV mode Press to leave the FORMAT function EXIT Note that a projector delay is part of the projector setup If you select a program and the broadcaster offers a teletext service the television gives you access to teletext pages and any subpages linked to the pages The arrow buttons on Beo4 and the menu bar at the top of the screen help you move to the page you want When you get there you can pause the turning of subpages to read them at your OWN pace The television can remember your favourite pages reveal hidden messages or help you switch to another program s teletext service To make your favourite teletext pages appear first when you bring up teletext store them as MEMO pages Teletext Basic teletext functions Navigate through teletext pages by using the menu bar at the top of the teletext page PAGE PROGRAM HALT REC SETUP REVEAL p100 PAGE PROGRAM HALT REC SETUP REVEAL P100 BBC 100 Wed 13 Oct 12 39 34 gt Press TEXT to gain access to teletext and EXIT to leave teletext To move to a new page gt Enter the number of the page you wish to see Or gt press 44 to move the highlighted cursor to PAGE gt Press or w to step between pages and hold to step faster gt Pressing GO steps to index pages 100 200 3
24. or a w on Beo4 to enter the four digits of your code Press 44 to go back to digits you wish to correct and use or w to change them gt Press GO after the last digit is found gt Re enter your code to confirm it and press GO again If the two codes are not identical the input fields are cleared and you must enter the code again To change or delete your pincode gt Press MENU to bring up the TV SETUP menu gt Press 44 twice followed by STOP The PINCODE menu appears on the screen gt Enter the correct pincode and press GO DELETE PINCODE is highlighted gt To delete your code press GO gt To change your code press w to highlight NEW PINCODE and press GO Enter the new code using the number buttons or a wand oress GO Re enter the new code to confirm it If you inadvertently press a wrong button while entering a code press STOP The entry is cancelled and the input fields are cleared Use your pincode If your television has been disconnected from the mains for 15 30 minutes the television prompts you for the pincode when you switch it on You may not be able to switch the television on immediately wait approximately 30 seconds and try again PINCODE PINCODE next gt gt accept MASTERCODE MASTERCODE next gt gt accept NOTE Should you lose or forget your code contact your Bang amp Olufsen retailer Your retailer can provide you with a mastercode which disables your
25. r such as language selection are reset and you must make your settings again 22 The pincode system is intended to make normal use of your television impossible for someone who does not know the pincode You choose whether or not to activate the pincode system When the pincode system is activated and the television has been disconnected from the mains for 15 30 minutes the pincode system goes into effect When reconnected and switched on the television automatically switches itself off after four minutes Entering the pincode returns the television to normal The pincode system Activate the pincode system Bring up the TV SETUP menu on the screen activate the PINCODE menu and choose from the submenus If you wish to deactivate the pincode system you can do so by deleting you pincode TV SETUP PROGRAM GROUPS TUNING PINCODE TIMER RECORDING PINCODE ob PLAY TIMER CONFIRM PINCODE OPTIONS STAND POSITIONS e GROUP1 next gt gt accept TV SETUP PROGRAM GROUPS TUNING PINCODE TIMER RECORDING DELETE PINCODE PLAY TIMER NEW PINCODE OPTIONS STAND POSITIONS e GROUP1 select NOTE You can change your pincode up to five times within a three hour period To activate the pincode system gt Press MENU to bring up the TV SETUP menu gt Press 44 twice followed by STOP The PINCODE menu appears on the screen gt Use the number buttons
26. ress GO The 9 available MEMO slots are shown by number The first is highlighted gt Press GO to store the current page The cursor moves to the next available MEMO slot gt Use the number buttons on Beo4 to select the next teletext page you wish to store gt Repeat the procedure for each page you wish to store gt To leave the MEMO setup press dor to move the cursor to BACK and press GO gt Press EXIT to leave teletext Day to day use of MEMO pages You may wish to refer to your teletext MEMO pages quickly for example if you are leaving for work and wish to check traffic information on a teletext service To view MEMO pages gt Press TEXT to bring up teletext gt Press or w to move between MEMO pages gt Press EXIT to leave teletext To delete a MEMO page gt Press dor to move the cursor to SETUP and press GO gt Move the cursor to the MEMO page you wish to delete and press the yellow button gt Press the yellow button again to confirm To view teletext subtitles for a program gt Press TEXT to bring up teletext gt Enter the number of the teletext subtitles page gt Press TV to remove the teletext menu bar When you change programs the teletext subtitles disappear If you would like available teletext subtitles to appear automatically for a particular program store the teletext subtitles page as MEMO page 9 First time use of teletext The very first time teletext
27. tches or because the DVD is from an incompatible region For more information about handling DVDs refer to the chapter Maintenance of your television on page 24 To load a disc and begin playback gt Press the load bar below the screen The loader Slides out and the display prompts you to load a disc gt Place a disc in the loader as described to the left gt Press and hold the load bar The loader retracts DVD is activated and playback begins automatically To load a DVD while watching TV for example for playback at a later point in time press the load bar shortly The loader retracts and playback does not begin If you restart playback of a loaded disc after an interruption playback resumes at the point of interruption Play and change chapters or tracks on a disc Press to start playing a DVD or DVD CD Press to step between chapters av or tracks Press repeatedly to jump to av another chapter or track on the disc Enter the chapter number to 1 9 step directly to a chapter or track Press to cue backwards or gt forwards during playback Press to resume playback GO NOTE Some DVDs offer special features which are temporarily available during playback such as additional film sequences In such situations press GO to select this special feature Pause slow playback or stop playback of a disc Press to pause playback Press for playback in slow motion either forwards or backw
28. to switch on the television TV Move left or right until your Groups are displayed When you find the Group you GO want press GO to select it Step up or down through the programs in that particular v Group gt Use the number buttons to enter 0 9 the number of the program you want to see Move left or right to switch to another Group and press GO GO to bring it up To bring up a program list for the current Group press and hold GO in Groups mode To select all avallable TV programs press TV Create Groups You can create up to eight different Groups Each Group can contain up to 18 programs The same program can be stored in more than one Group TV SETUP m PROGRAM GROUPS 4 PROGRAM GROUPS TUNING GROUP1 TIMER RECORDING PLAY TIMER OPTIONS STAND POSITIONS e GROUP1 selec m name move gt gt PROGRAM GROUPS Ku group create group A A v A character next gt gt accept PROGRAM GROUPS MY GROUP E name move gt gt create COPY TV l TO MY GROUP 1 DR2 DR2 2 TV2 SKY NEWS De ZDF 4 EUROSPORT RADIO 2 5 ZDF BBC 6 ARD Te ee 15 SAT 1 16 SVT 2 17 NRK 18 TV4 copy gt gt accept gt Press TV to switch on the television gt Press MENU to bring up the TV SETUP menu PROGRAM GROUPS is already highlighted gt Press GO to bring up the PROGRAM GROUPS menu gt Press w to move the cursor to an empty Group and press the green button to be able
29. wrung cloth dipped in a solution of water containing only a few drops of mild detergent such as washing up liquid Contrast screen To clean the picture screen use a mild window cleaning fluid To retain the optimum performance of the screen make sure that no streaks or traces of the cleaning fluid are left on the screen Be ware that some types of micro fibre cloths may harm the optical coating due to their strong abrasive effect Beo4 Wipe the Beo4 remote control with a soft lint free firmly wrung cloth NOTE If the front screen glass should crack or chip or if it should be damaged in any way it must be replaced immediately as it could otherwise cause injury You can order replacement front screen glass from your Bang amp Olufsen retailer Never use alcohol or other solvents to clean any part of the television stand or bracket Changing the Beo4 batteries When BATTERY appears in the Beo4 display it is time to change the batteries in the remote control The Beo4 requires three batteries We recommend that you use Alkaline batteries only 1 5 V size AAA Replace the batteries as shown on this page Keep a finger on top of the batteries until the lid is replaced When you have replaced the batteries you must wait about 10 seconds until TV appears in the display The Beo4 remote control is then ready for use Handling discs Should the disc become soiled by fingerprints dust or dirt it can

Download Pdf Manuals

image

Related Search

Related Contents

Condensed overview  Furman Sound SP-20ABE Stereo Amplifier User Manual  STIHL SG 11, SG 11 PLUS Owners Instruction Manual  E70 User Manual English  PC CHIPS M871G (V1.5)  Miele DGC 6660  CHAMPU AUTO    Sennheiser PC30 headset  3. Trading System Builder  

Copyright © All rights reserved.
Failed to retrieve file