FG 110 - Kimo Canada
Contents
1. e Device drop down menu Select the measuring unit The device is on and displays the measurements gt Press on Select UNIT blinks on screen gt Press on OK The unit currently used blinks on screen gt Press on Select until the desired unit appears ppm VOL LEL gt Press on OK to validate the unit selection UNIT blinks on screen gt Press on On Off Esc to return to the measurement display 1x sete UNIT ox a UNIT UNIT Soret n SEL PPm VOL Adjust the auto shut off The device is on and displays the measurement gt Press on Select until AUTO OFF blinks on screen gt Press and OK The time before the device auto shut off blinks at the bottom of the screen gt Press on Select until the required time before auto shut off appears 15 30 45 60 75 90 105 120 minutes or OFF gt Press on OK to validate AUTO OFF blinks on screen gt Press on On Off Esc to return to the measurement gt 0K 1200 VOL Activate or deactivate the keys beep The device is on and displays the measurement gt Press on Select until BEEP blinks on screen gt Press on OK OFF or ON blinks on screen gt Press on Select to activate the keys beep ON or deactivate it OFF gt Press on OK to validate BEEP blinks on screen gt Press o2. KIMO INSTRUMENTS Pressure Temperature Humidity Air velocity Airflow Sound level Gas leak detector FG 110 DESCRIPTION OF THE DEVICE ahah AA Ah ath i LEETE att Vite ow S a i OK key Backlight key On OfflEsc key Select key h Hold min max key PERFORM A MEASUREMENT gt Turn on the device by pressing on On Off Esc The device displays its name FG110 When it turns on the device emits a beep then performs a pre heating phase This phase lasts 60 seconds The count of this pre heating time displays on screen During the normal functioning in the absence of gas leak the device emits a regular beep Otherwise if the device detects the presence of gas the repetition frequency of the beep will also flash at the same frequency FREEZE THE MESUREAMENT During a measurement gt Press once on Hold min max Hold appears on screen and the measurement is frozen Press on On Off Esc to exit the hold function The device returns to the measurement display gt DISPLAY THE MINIMUM AND THE MAXIMUM Once the measurement is frozen gt Press on Hold min max gt The device displays the maximum value measured since the last questioning at the top of the screen and the minimum value measured since the last questioning at the bottom of the screen gt Press on On Off Esc to return to the measurement display ADJUST THE DEVICE
3. ice backlight gt Press again on this key to deactivate the backlight CHANGE THE BATTERIES gt Remove the front part at the back of the device gt Change the old batteries by AAA LRO3 1 5V batteries gt Replace the front part X Once returned to KIMO required waste collection will be assured in the respect of the environment in accordance to 2002 96 CE guidelines relating to WEEE EXPORT DEPARTMENT Boulevard de Beaubourg Emerainville BP 48 77312 MARNE LA VALLEE CEDEX 2 Tel 33 1 60 06 69 25 Fax 33 1 60 06 69 29 ISO 9001 Qualit AFNOR CERTIFICATION NTang portable FG110 10 06 14 RCS 24 P rigueux 349 282 095 Non contractual document We reserve the right to modify the characteristics of our products without prior notice
4. n On Off Esc to return to the measurement SEL 3x Sect BEEP gt 0K BEEP eea SEL ON ON L SEL BEEP x BEEP SEL OFF 0 000 WVOL Adjust the alarm This function allows to activate an alarm When the device detects a leak it emits a beep whose frequency is increasingly fast as and when the concentration increases and gets closer to defined alarm threshold The beep becomes continuous when the device reaches and exceeds this threshold This threshold is between 1000 and 10 000 ppm The device is on and displays the measurement gt Press on Select until AL 1 blinks on screen gt Press on OK A succession of 5 zeros displays and the first zero blinks Press on Select to select the first digit value 0 1 or Off If 1 is selected the maximum threshold 10 000 ppm is reached Press on OK AL 1 blinks on screen If Off is selected the alarm is deactivated Press on OK to validate AL 1 blinks on screen If O is selected the following digit blinks Press on Select to select its value then press on OK The following digit blinks perform the same procedure Press on OK when the last digit value is selected AL 1 blinks on screen gt Press on On Off Esc to return to the measurement display v v v v ACTIVATE THE BACKLIGHT The device is on gt Press on Backlight to activate the dev
Download Pdf Manuals
Related Search