User Manual - Lightspeed Technologies, Inc.
Contents
1. x 9 5 x 1 75 406 4 mm x 241 3 mm x 44 5 mm Weight 3 23 lbs 1 5 kg RECEIVER SPECIFICATIONS Carrier Frequencies IR 2 06 2 54 MHz IR Operating Range up to 1200 square feet Receiver Type Superheterodyne Receiver Sensitivity 6 V for 60 dB S N Image and Spurious Rejection gt 70 dB Alternate Carrier Frequencies iR 3 20 3 70 MHz TRANSMITTER SPECIFICATIONS Redmike and Redmike VC Audio Distortion lt 1 Built in Microphone Unidirectional Electret Battery Power 1 year warranty 1 AA NiMH Rechargeable Sensing Battery Audio Input 3 5 mm Dimensions W x D x H 0 9 x 1 0 x 3 5 22 9 mm x 25 4 mm x 88 9 mm Weight 2 1 oz 59 5 g Redmike Share Handheld Microphone Audio Distortion lt 1 Built in Microphone Unidirectional Electret Battery Power 1 year warranty 2 AA NiMH Rechargeable Dimensions W x D x H 2 25 x 2 25 x 8 75 57 2 mm x 57 2 mm x 222 3 mm Weight 7 36 oz 208 7 g MN0435US01 7 LIGHTSPEED TECHNOLOGIES 11509 SW HERMAN ROAD TUALATIN OR 97062 TOLL FREE 800 732 8999 PHONE 503 684 5538 FAX 503 684 3197 LIGHTSPEED TEK COM2. 5 YEARS beginning at the date of the purchase invoice If such malfunction occurs the product will be repaired or replaced at Lightspeed s option without charge during the warranty period Lightspeed s Warranty Exchange Program applies to all infrared systems within the five 5 year warranty period If an infrared product or component has an issue that requires service a refurbished replacement will immediately be sent to the customer to minimize downtime Customers will receive the exchange product s or component s within 2 3 days A prepaid return label will be included with exchanged products so original malfunctioned equipment can be returned to Lightspeed Any exchanged equipment will remain covered under the original five 5 year warranty 1 Warranty on infrared microphones is FIVE 5 YEARS 2 Warranty on Lightspeed NiMH rechargeable batteries is one 1 year 3 Prepaid shipping label provided by Lightspeed for warranty repairs within the U S 4 Warranty does not extend to finish appearance items or malfunctions due to abuse or operation other than specified conditions nor does it extend to incidental or consequential damages Repair by other than Lightspeed or its authorized service agencies will void this warranty Information on authorized service agencies is available from Lightspeed Technologies Inc 30 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Saf
3. If the optional iR media connection is in use set the microphone to Channel A PROBLEM Low Volume or Feedback SOLUTION Follow these steps to eliminate low volume or feedback Ensure microphone is positioned appropriately just below the collar bone Check volume level on the amplifier If the volume is too high feedback will occur Adjust accordingly Adjust the volume level on the back of the optional Redmike VC Turn up the volume on the Redcat if volume seems too low If feedback occurs try turning down the volume on the Redcat PROBLEM No Sound From Speaker SOLUTION Follow these steps to produce sound from speakers Turn the Redcat on Confirm that the POWER light located on the front panel is on Confirm signal is being received at the Redcat The audio signal light will be red indicating a signal is being received Confirm that Redmike is turned on There will be a blue LED on the microphone to indicate it is powered on Note Most problems are directly related to low battery power Please run through the Battery Check items first For remaining troubleshooting use known good fully charged batteries If you review these instructions and still have questions write down the serial number and model number of your system and call Lightspeed Technical Services at 800 732 8999 5 a m 5 p m PST Customers outside the U S should contact their
4. Voltage Directive LVD Lightspeed Technologies a lanc un programme de recyclage de produits en Europe conform ment la directive de l Union Europ enne 2002 96 CE relative aux d chets d quipements lectriques et lectroniques directive DEEE Veuillez visiter notre page Web www Lightspeed tek com pour plus de renseignements Ce produit est fabriqu en utilisant des processus sans plomb ni aucune autre mati re nuisible l environnement Il est conforme aux nouvelles r gles europ ennes les plus strictes en mati re de biens de consommation RoHS UTILISEZ UNIQUEMENT LA BATTERIE LIGHTSPEED FOURNIE 32 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications Ce dispositif est conforme l article 15 de la r glementation FCC Le fonctionnement est soumis aux deux conditions suivantes 1 ce dispositif ne peut pas causer d interf rence nuisible et 2 ce dispositif doit accepter toute interf rence re ue notamment les interf rences pouvant occasionner un fonctionnement non souhait Tout changement ou modification n ayant pas fait l objet d une autorisation expresse man ant de la partie responsable de la conformit pourraient entra ner la perte du droit d usage de l quipement par l utilisateur Cet quipement a t test et certifi conforme aux restrictions pour les appareils num riques de Classe B confo
5. following system complies with the appropriate basic safety and health requirements of the Directive based on its design and type as brought into circulation by us ln case of alteration of the system not agreed upon by us this declaration will lose its validity Product REDCAT SERIES Model Number s REDCAT RC2 Conforms to the following EU Directives and the standards stated Low Voltage Directive 73 23 EEC and amendments UL lEC 60065 EMC Directives 89 336 EEC 92 31 EEC 93 68 EEC 2004 108 EC EN 55022 2006 A1 2007 EN55024 1998 A1 2001 A2 2003 EN61000 3 amp 4 Generic Immunity Standard CISPR 22 Class B Radiated and Conducted Emissions from Audio Equipment Including EN 61000 3 2 2000 EN 61000 4 5 2005 EN 61000 3 3 1995 A1 2001 A2 2005 EN 61000 4 6 2006 EN 61000 4 2 2001 EN 61000 4 8 2001 EN 61000 4 3 2006 EN 61000 4 11 2004 EN 61000 4 4 2004 The Technical Construction File is available to proper authorities and the product is CE marked LST Representatives 2 9 2012 John Chabot Compliance Engineer Dave Jordahl Chief Engineer Date 34 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications SYSTEM SPECIFICATIONS OVERALL SPECIFICATIONS Power Output 20 Watts Amplifier Frequency Response 120 Hz 13 kHz Signal to Noise Ratio gt 77 dB Dynamic Range gt 73 dB Overall Dimensions W x D x H 16
6. local reseller SECTION 4 TROUBLESHOOTING COMMON PROBLEMS AND SOLUTIONS 28 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications Speak in a natural voice A normal conversational speech level will provide an adequate signal It is not necessary to increase the intensity of your voice the audio system provides adequate amplification approximately 5 10 dB above ambient room noises Avoid wearing jewelry that may rub or bump against the microphone Turn the Redmike off during private conversations with a student parent or other classroom visitor You can also cover the LED lens on top of the Redmike to block the signal Recharge batteries each night When recharged nightly operating time actual usage for the transmitters will last through a typical school day TIPS TO OBTAIN OPTIMUM AUDIO PERFORMANCE 29 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications FIVE YEAR LIMITED WARRANTY Our Service Department 800 732 8999 5 a m 5 p m PST will handle all your repair replacement needs Customers outside the U S should contact their local resller SECTION 5 WARRANTY SAFETY amp SPECIFICATIONS Lightspeed Classroom Audio Systems are guaranteed against malfunction due to defects in materials and workmanship for a period of FIVE
7. on speak into the Redmike and slowly adjust the ALD volume control until the appropriate audio level is attained in the ALD s receiver headphones 5 It may be necessary to adjust the volume on the Personal FM receiver to achieve appropriate volume level 6 OUTPUT TO ASSISTIVE LISTENING DEVICE ALD 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications 19 USING REDMIKE TO AMPLIFY EXTERNAL AUDIO EQUIPMENT The Redmike includes a 3 5mm audio input jack to connect to an audio source like a laptop or MP3 player The Redmike will transmit the audio signal to be played through the system If your system includes two Redmikes we recommend using Channel B student mike to amplify the external audio equipment so the teacher s volume on the Channel A teacher mike does not have to be adjusted To determine which Redmike is set to Channel B you can look at the switch on the back of the mike or speak into one of the mics and watch which set of LED s glow on the front panel of the Redcat A Volume or B Volume correspond to Channels A or B 1 Plug your external audio equipment for example laptop into the input on the Redmike labeled INPUT using a 3 5mm patch cable AUDIO OUTPUT AUDIO INPUT 2 Adjust the volume of the selected mic channel to achieve desired loudness MICROPHONE CH A CH B MIN MIN MAX MAX 20 1 Overvie
8. that charging is complete and a full charge has been reached A blinking light indicates a charging or sensing error See Troubleshooting section for more information Redmike incorporates alkaline protection into the microphone design Always use a Lightspeed rechargeable sensing battery Replacement AA NiMH batteries may only be purchased through Lightspeed Technologies part NH2A27 Do not attempt to charge alkaline batteries They can overheat and expand creating a significant hazard and damaging the microphone this is not covered by warranty 1 Plug power cord into the cradle charger and then plug the AC end into an electrical outlet 2 Place the Redmike into the cradle The LED on the cradle will glow red indicating charging has started When the Redmike is fully charged the LED on the cradle charger will change to green 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications 17 5 OPERATING THE REDMIKE Once the Redmike is charged follow these steps to set it up for use 1 Turn the Redcat power on The blue LED will glow 2 Remove the Redmike from the charging cradle and turn it on 3 Slip the Redmike with lanyard around the neck The top of the microphone will be approximately just below the collarbone 4 Slowly increase the channel A B volume up to the green section of the dial This designates normal volume range
9. the Redmike is charging When fully charged the light will glow green A blinking red light indicates that no battery is sensed Redmike Yellow Protective Tab may not have been completely removed see page 10 item 4 A blinking green LED means a non Lightspeed battery has been installed possibly an alkaline battery 2 DC POWER PORT Connect the 5V 1 0A DC power cord here 3 OPTIONAL CHARGING PORT Plug the charging cord for the optional Redmike Share microphone here CRADLE CHARGER CONTROLS AND CONNECTIONS 1 2 3 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications 11 The Redcat is shipped with feet to stand on a cabinet or tabletop Alternatively the feet can be used as wall mount brackets Advantages of either include SECTION 2 SET UP amp USE 1 DETERMINE SET UP LOCATION 1A TO SET UP ON TABLE TOP Tabletop recommended Virtually no setup time Greater flexibility to move to different locations First consider that the Redcat should be placed within 7 feet of an electrical outlet and on a surface about 3 6 feet off the ground Next find a location as far away as possible from the teacher who will be using the mic The best place is against the wall opposite where the teacher will be speaking If this is not possible other good locations are along either wall next to the teacher or in a corn
10. ANT SAFETY INSTRUCTIONS 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use the apparatus near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified ser
11. TOR A blue light indicates the Redmike is on and fully charged A red light indicates a charge is needed 3 BATTERY COMPARTMENT To access the battery compartment slide the door downward The battery should only be replaced by a Lightspeed AA rechargeable sensing battery part NH2A27 4 YELLOW PROTECTIVE TAB Slide the battery compartment door open to remove this disposable protective tab before use NOTE do not attempt to remove the tab without first opening the compartment door as it may tear leaving fragments 5 AUDIO MICROPHONE INPUT Use this input to plug in a laptop MP3 player or other audio source to wirelessly transmit audio to be played through the system Alternatively an external microphone can be connected 6 CHANNEL SELECT SWITCH CH A B This switch allows for selection between Channel A or B If you are using a single microphone we recommend using Channel A 7 CHARGER CONTACTS These contacts interface with the charging tabs in the RMCC cradle charger for daily charging Simply place the Redmike in the charger REDMIKE CONTROLS AND CONNECTIONS 1 2 3 5 6 7 Sli de b att ery d oo r op en Re m ov e t ab b efo re u se 4 10 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications 1 CHARGE INDICATORS The light glows red while
12. U s e r M a n u a l Classroom Audio System CH A PWR CH B TABLE OF CONTENTS SECTION 1 5 System Components and Unpacking Overview 6 Optional Components 7 Front Panel Indicators 7 Top Panel Controls 8 Side Panel Controls and Connections 8 Rear Panel Controls and Connections 9 Redmike Controls and Connections 10 Cradle Charger Controls and Connections SECTION 2 11 Step 1 Determine Set up Location Set up amp Use 11 1A To Set Up on Table Top 12 1B To Set Up Mounted on a Wall 13 1C Wall Mounting Locations 14 Step 2 Connecting the Power Supply 15 Step 3 Audio Integration 16 Step 4 Charging the Redmike 17 Operating the Redmike 18 Output to Assistive Listening Device ALD 19 Using Redmike as Wireless Audio Link SECTION 3 20 Optional Redmike VC Controls and Connections Optional Accessories 21 Redmike VC Charging 21 Redmike VC Intial Set up 22 Redmike Share Controls and Connections 23 Redmike Redmike Share Charging 24 Redmike Share Initial Set up 25 Initial Set up Optional iRMC Media Connector 26 Optional iRMC Media Connector Audio Integration 26 Optional Accessories SECTION 4 27 Common Problems and Solutions Troubleshooting 28 Tips to Obtain Optimum Audio Performance SECTION 5 29 Five Year Limited Warranty Warranty Safety 30 Safety Warnings and Certifications amp Specifications 34 System Specifications IMPORT
13. anty Safety amp Specifications INITIAL SET UP OPTIONAL IR MEDIA CONNECTOR 1 Turn off the second microphone The iR Media Connector uses the same channel channel B as the optional second microphone Redmike or Redmike Share As a result they cannot be used simultaneously If you have a second microphone turn it off before transmitting audio from the iRMC NOTE If you adjust the CH B volume on the classroom audio system you will also be changing the volume for your second microphone Return the CH B volume knob to the original position before turning the second microphone back on 2 The iR Media Connector volume is preset for most standard audio signals If you need to turn the volume up or down follow this procedure A Adjust the volume at the computer television or other audio source if possible B If the audio source does not have a volume control such as many DVD players adjust the volume at the iRMC C If the first two options do not give optimum volume level the last place to adjust the volume is the CH B volume on the Redcat CH A PWR CH B 26 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications OPTIONAL IR MEDIA CONNECTOR AUDIO INTEGRATION OTHER OPTIONAL ACCESSORIES The iRMC is designed to integrate with the Redcat and multiple audio sources allowing other instructional technologies to be clearly hear
14. d throughout the classroom IRMC2 Infrared Media Connector TK250M Noise canceling headset microphone TCC7 Charging cable for Redmike Share NH2APK AA NiMH rechargeable battery pack for Redmike Share one per microphone MSC3535 3 5mm to 3 5mm stereo audio cable CH A PWR CH B Projector DVD VCR iR Media Connector Redcat Projector Audio In Audio Out Video In Audio Out Audio Out Video Out Video Out VGA Out Teacher Microphone 27 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications ALL PROBLEMS Most Problems are related to low battery power SOLUTION Battery Check Confirm batteries are charged each night Confirm proper batteries are used The Redmike requires the Lightspeed NH2A27 rechargeable sensing battery for proper charging The Redmike Share uses the NH2APK rechargeable battery pack Make sure the microphones are turned off while charging so a full charge is attained Full charge will last eight hours Inspect the battery contacts Clean and adjust if necessary PROBLEM Hearing Static SOLUTION Follow these steps to eliminate static Ensure Redcat is in optimum location refer to Redcat placement in manual A Redcat will cover a 1200 sq ft enclosed classroom Ensure that no other Redmike Redmike Share is operating on the same channel
15. dheld Mic amp Charging Cable Optional equipment which may be part of your Redcat system RC2 Redcat all in one receiver amplifier speaker with power supply 24V 1 75 NA Power supply for Redcat 24V 1 75 _ Power supply for Redcat specify country RMT2 Redmike classroom microphone with rechargeable battery and lavalier cord NH2A27 Lightspeed AA rechargeable sensing battery for Redmike RMLC3 Lavaliere cord for Redmike RMCC Redmike cradle charger 5V 1 0 NA Cradle charger power supply 5V 1 0 INT Cradle charger power supply universal plug attachment STANDARD COMPONENTS OPTIONAL COMPONENTS RMV2 Redmike VC microphone with battery RMS2 Redmike Share handheld microphone with battery pack NH2APK NiMH rechargeable battery pack for Redmike Share IRMC2 Infrared media connector with cables and power supply WMKRC2 Redcat wall mounting kit includes screws wall anchors security clip and extra RC feet 7 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications FRONT PANEL INDICATORS 1 POWER ON INDICATOR The power LED will glow blue when power is applied 2 CH A amp CH B Illuminate red when the audio for the corresponding microphone is received CH A PWR CH B 1 2 2 TOP PANEL CONTROLS 1 CHANNEL A VOLUME Controls the volume level of the microphone set to channel A 2 CHANNEL B VOLUME Controls the volume lev
16. e could void the user s authority to operate this equipment This equipment has been tested and found to comply with the limits of a Class B Digital Device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction may cause harmful interference to radio communication However there is no guarantee that interference will not occur in a particular installation If this equipment does cause interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help 33 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications EU DECLARATION OF CONFORMITY ACCORDING TO EC LVD DIRECTIVE 2006 42 EC Manufacturer Lightspeed Technologies lnc Address 11509 SW Herman Rd Tualatin Oregon 97062 We Herewith declare that the
17. el of the microphone set to channel B MICROPHONE CH A CH B MIN MIN MAX MAX 1 2 8 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications SIDE PANEL CONTROLS CONNECTIONS 1 TONE CONTROL Adjusts the audio level for optimum sound quality 2 AUDIO INPUT VOLUME CONTROL amp INPUT JACK 3 5mm stereo connector for connecting classroom audio sources to the Redcat Controls the volume level of the audio input from the connected audio source 3 AUDIO OUTPUT VOLUME CONTROL amp INPUT JACK 3 5mm stereo connector for connecting to an assisted listening device ALD or to a computer for recording Controls the volume level of the audio output 4 POWER SWITCH This switch is used to turn the Redcat on or off The front panel blue LED lights when power is on 5 DC POWER INPUT JACK Plug the power supply 24V 1 75A into this jack 2 1 4 5 3 REAR PANEL FEATURES 1 CARRYING INSET Cutaway grip for moving or carrying the Redcat Access 2 CABLE MANAGEMENT AND STRAIN RELIEF 3 WALL MOUNTING SLOTS 4 SECURITY BRACKET SLOT Testing Purposes Only 1 2 3 4 9 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications 1 POWER BUTTON Press this button to turn the Redmike on press again to turn it off mute 2 POWER LOW BATTERY INDICA
18. er Avoid placing the Redcat next to where the teacher instructs Putting the Redcat s in close proximity to the teacher s mic can result in feedback Wall mount More permanent setup Greater security Avoid Good placement Best placement 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications 12 1B TO SET UP MOUNTED ON A WALL First consider that the Redcat should be placed within 7 feet of an electrical outlet and about 6 8 feet off the ground Next find a location as far away as possible from the teacher who will be using the mic The best place is centered on the long wall opposite the teacher If this is not possible other good locations are on the wall next to the teacher Avoid placing the Redcat on any wall close to where the teacher usually stands to instruct the class Having the teacher s mic too close to the Redcat can result in feedback Good placement Best placement Avoid 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications 13 1B TO SET UP MOUNTED ON A WALL CONT D 1 Level template and tape to wall 2 Mark position of drill holes on wall 3 Drill pilot holes 4 Insert anchors 5 Remove feet from Redcat and place over anchors 6 Insert and secure screws through the Redcat feet into the anchors 7 If using optional sec
19. ety amp Specifications SAFETY WARNINGS AND CERTIFICATIONS CERTIFICATIONS This product conforms with the essential requirements of the following European Union Directives 2004 108 EC Electromagnetic Compatibility EMC and 2006 95 EC Low Voltage Directive LVD The exclamation mark inside an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instruction in the literature accompanying this product This product is manufactured using lead free processes and is free of other materials harmful to the environment It conforms to the most stringent new European guidelines for consumer products RoHS Lightspeed Technologies launched a formal product recycle program in Europe that complies with the European Union Directive 2002 96 EC on Waste Electrical and Electronic Equipment WEEE Directive Please visit our website at www Lightspeed tek com for more information ATTENTION RISQUE D LECTROCUTION NE PAS OUVRIR CONFORM MENT AUX NORMES D INSTALLATION APPLICABLES CE PRODUIT DOIT TRE INSTALL PAR UNE PERSONNE FAMILIARI S E AVEC LA CONCEPTION ET LE FONCTIONNEMENT DU PRODUIT ET CONSCIENTE DES RISQUE ENCOURUS This product is listed to UL standards and requirements for electrical safety by Underwriters Laboratories Inc The lightning flash with arrowhead symbol inside an equilateral triangle is intended to alert the user to the
20. in the classroom 5 While speaking in a normal voice fine tune the volume up or down Proper volume level should be as follows a Your voice should be clearly heard by another person on the other side of the room b You should barely be able to hear your own voice c There should not be any audio feedback or squealing outside of 2 3 feet if there is turn the volume down slightly REMEMBER This equipment supplements the user s voice so they are able to speak in a conversational tone Having the volume set too high will result in feedback and listener fatigue 6 Once initial volume level is set walk around the room and listen for audio dropout and overall audio quality 7 If a second Redmike was purchased repeat steps 2 4 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications 18 1 Turn the ALD Assistive Listening Device volume control on the Redcat side panel counterclockwise all way the down 2 Determine the size and type of audio input jack on the device as many manufacturers products differ in connector size and shape The Lightspeed 370 Transmitter requires a 3 5mm to 3 5mm patch cable part MSC3535 not included 3 Connect a patch cable from the ALD s microphone jack or AUX input to the 3 5mm audio jack labeled ALD OUT on the side of the Redcat 4 With the Redcat and ALD turned
21. l outlet 3 Power on the Redcat by pressing the power button 2 CONNECTING THE POWER SUPPLY Power On 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications 15 Audio Input The Redcat has one AUDIO INPUT with volume control for connecting to classroom audio sources Use a patch cable not included to connect a computer iPod iPad or other audio source 3 AUDIO INTEGRATION The next step in setting up your Redcat system is to connect it to the other elements of your audio system Audio systems have varying elements you may have a computer television DVD VCR player a visual projection system or other devices In this section you will find instructions on how to connect an external audio device like a TV VCR DVD MP3 or computer directly into the Redcat 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications 16 4 CHARGING THE REDMIKE Before use the Redmike should be charged It will take 8 9 hours for the Redmike to obtain a full charge A fully charged Redmike will last for over 7 hours of use If microphones are used daily they should be kept in the cradle microphones can be left in a charging cradle constantly for up to 2 weeks without causing degradation to battery life A red light on the charging cradle indicates the Redmike is charging A green light indicates
22. ns 1 Ensure that the Redmike Share is turned off 2 Make sure the cradle charger is plugged into a wall outlet Connect one end of the charging cable into the jack labeled CHARGER on the bottom of the Redmike Share 3 Plug the other end into the charging jack on the rear of the cradle charger 4 The LED on the microphone will glow red to indicate charging 5 Leave the Redmike Share plugged in overnight 8 10 hours to obtain a full charge A blinking red LED indicates that charging is complete REDMIKE SHARE Charging 24 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications REDMIKE SHARE Initial Set up 1 Ensure the Redcat is on The blue LED on the front panel will glow 2 Turn on the Redmike Share by sliding the switch to the top position 3 Grip the barrel in the center section Avoid covering the infrared emitters just below the microphone grille This could interrupt signal transmission 4 While speaking in a normal voice increase the channel B volume on the Redcat until your voice is barely audible REMEMBER This equipment is designed to supplement and distribute the user s voice so they are able to speak in a conversational tone Having the volume set too high will result in feedback and listener fatigue 25 2 Setup amp Use 3 Optional Accessories 1 Overview 4 Troubleshooting 5 Warr
23. presence of non insulated hazardous voltage within the product s enclosure which may be of sufficient magnitude to induce a risk of electric shock to persons USE A LIGHTSPEED SUPPLIED BATTERY ONLY 31 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications PR CAUTIONS DE S CURIT ET CERTIFICATIONS CERTIFICATIONS Le point d exclamation contenu dans un triangle quilat ral avertit l utilisateur de la pr sence d importantes instructions d exploitation et de maintenance dans la documentation qui accompagne ce produit ATTENTION RISQUE D LECTROCUTION NE PAS OUVRIR CONFORM MENT AUX NORMES D INSTALLATION APPLICABLES CE PRODUIT DOIT TRE INSTALL PAR UNE PERSONNE FAMILIARI S E AVEC LA CONCEPTION ET LE FONCTIONNEMENT DU PRODUIT ET CONSCIENTE DES RISQUE ENCOURUS L clair fl che dans un triangle quilat ral avertit l utilisateur de la pr sence d une tension dangereuse non isol e a l interieur de l appareil qui peut tre d une ampleur suffisante pour constituir un risque d lectrocution Ce produit est certifi conforme aux normes et aux exigences UL en mati re de s curit lectrique par Underwriters Laboratories Inc Ce produit est conforme aux principales exigences des directives de l Union Europ enne suivantes 2004 108 EC Electromagnetic Compatibility EMC and 2006 95 EC Low
24. rm ment l article 15 de la r glementation FCC Ces restrictions visent assurer une protection raisonnable contre les interf rences nuisibles dans les installations r sidentielles Cet quipement produit utilise et peut mettre de l nergie de fr quence radio et s il n est pas install et utilis conform ment aux instructions peut causer des interf rences nuisibles aux communications radio Toutefois rien ne garantit l absence d interf rences dans une installation particuli re Si cet quipement provoque des interf rences avec la r ception radio ou t l vision ce qui peut tre d termin en teignant et en rallumant l quipement il est recommand l utilisateur d essayer de corriger les interf rences par l un des moyens suivants En r orientant ou en r installant l antenne de r ception En augmentant la distance entre l quipement et le r cepteur En branchant l quipement un circuit autre que celui o le r cepteur est branch En contactant le revendeur ou un technicien exp riment en radio t l vision This device complies with part 15 of the FCC Rules Operation is subject to the fol lowing two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for complianc
25. urity bracket mount on wall using the provided screws and anchors 8 Slide the Redcat onto the wall mounted feet Drill Template for wall mounting the REDCAT System Drill holes Instructions Determine the best location for the REDCAT refer to the user manual provided with this product For wall mounting the REDCAT should be mounted 7 to 8 feet from the oor 1 Start by leveling this template and taping to the desired location on the wall 2 Mark the hole locations using a sharp pencil 7 locations 3 Drill pilot holes 4 Insert anchors 5 Insert screws through the feet and tighten to the wall 6 Insert screws through the security tab bracket and tighten to the wall 7 Slide the REDCAT onto its mounted feet If the safety tab is installed it should snap into place preventing system removal Materials Required Drill Bit Size appropriate for the anchors or screws being used Anchors Needed for mounting on drywall plasterboard or cement block Screws Wood screws or screws appropriate for anchors Security Tab Foot Foot IG0432US01 0 AC IGRC2DT OR 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications 14 1 Locate the power supply and AC power cord Connect the AC power cord into the DC power supply 2 Insert the DC connector into the DC INPUT connector on the Redcat and plug the other end to an electrica
26. vice personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 When the mains plug or appliance coupler is used as the disconnect device it shall remain readily operable 16 Please keep the unit in a good ventilation environment 17 WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture 18 Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus 19 Warning battery pack shall not be exposed to excessive heat such as sunshine fire or the like 5 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications SECTION 1 OVERVIEW SYSTEM COMPONENTS AND UNPACKING The standard configuration of the Redcat will contain Redcat Infrared Receiver Amplifier and Power Supply CH A PWR CH B Cradle Charger and Power Supply Redmike Classroom Microphone 6 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications OPTIONAL COMPONENTS Redmike VC Volume Control Microphone Redmike Share Han
27. w 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications SECTION 3 OPTIONAL ACCESSORIES OPTIONAL Redmike VC Volume Control Controls and Connections 5 6 7 8 1 2 3 Sli de b att ery d oo r op en Re m ov e t ab b efo re u se 4 1 POWER MUTE BUTTON 2 POWER LOW BATTERY INDICATOR A blue light indicates the Redmike VC is on and fully charged A red light indicates a charge is needed 3 BATTERY COMPARTMENT To open slide the door downward The battery should only be replaced by a Lightspeed AA rechargeable sensing battery part NH2A27 4 YELLOW PROTECTIVE TAB Slide the battery compartment door and remove this disposable protective tab before use 5 AUDIO MICROPHONE INPUT Use this input to plug in a laptop MP3 player or other audio source to wirelessly transmit audio to be played through the system Alternatively an external microphone can be connected 6 CHANNEL SELECT SWITCH CH A B Use this to choose Channel A or B If you are using a single microphone we recommend using Channel A 7 VOLUME CONTROLS UP DOWN 8 CHARGER CONTACTS These contacts interface with the charging tabs when the Redmike VC is placed in the RMCC cradle charger 21 2 Setup amp Use 3 Optional Accessories 1 Overview 4 Troubleshooting 5 Warranty Safet
28. y amp Specifications REDMIKE VC Charging REDMIKE VC Initial Set up Before use the Redmike VC should be charged See page 18 and follow the same instructions for the Redmike See page 19 and follow the same instructions for the Redmike to setup the Redmike VC NOTE A nominal volume level must be set on the Redcat before adjusting controls on the Redmike VC The teacher can now use the controls on the Redmike VC to adjust the volume level from anywhere in the room The microphone volume control has 4 steps up and 4 steps down from the mid point 9 levels total 22 1 Overview 2 Setup amp Use 3 Optional Accessories 4 Troubleshooting 5 Warranty Safety amp Specifications 1 2 3 5 1 POWER SWITCH 2 POWER CHARGE INDICATOR this light glows blue when turned on and turns off to indicate low battery level When charging the light glows red 3 AUDIO INPUT plug a laptop MP3 player or other audio device into this jack to wirelessly transmit the audio signal to be played through the system 4 CHANNEL SELECT SWITCH CH A B Located in the battery compartment this switch is set to Channel B at the factory 5 CHARGER INPUT Plug the charging cable from the Redmike cradle charger or into this jack REDMIKE SHARE Controls and Connections 4 23 2 Setup amp Use 3 Optional Accessories 1 Overview 4 Troubleshooting 5 Warranty Safety amp Specificatio
Download Pdf Manuals
Related Search