Touchpad Access Cylindrical Lock Installation Instructions
Contents
1. ASSA ABLOY the global leader in door opening solutions ARROW Lock amp Door Hardware 80 9150 0066 010 Rev C M a ASSA ABLOY p Advanced Mode Provides a 3 tier PIN code system for commercial use In Advanced mode a total of 1 000 PIN codes are available for access The 1 000 PIN codes are divided into twenty 20 Supervisor groups of fifty 50 User codes per group Advanced mode also has a Master code which is used only for programming and does not grant access B All programming is performed through the Master touchscreen using the Master or Supervisor code and voice guided prompts Only the Supervisor code can establish User codes While in Advanced mode the lock can be programmed for Passage mode Silent mode Lockout mode or alternate Language settings E TD User Sue Auto re lock time wrong code entry limits J and shut down times are adjustable can be changed from factory default The operating mode can be changed from Advanced to Easy or visa versa for any lock Changing the mode resets the lock to factory defaults and all prior programming and PIN codes will be lost See page 17 for more information Settings Master Supervisor Settings Factory Defaults 00 Sur 04 suf 09 Supervisor 1 Supervisor User User User User User User2. Entrance Authorization X Master Code 123456 Register Change Master Code Lockout Mode Disabled Register Change Delete Supervisor Code Passage Mode Disabled Register Change Delete User Code Silent Mode Disabled Set All Code Lockout Mode Re lock Time 5 Seconds Set Group Lockout Mode Wrong Code Entry Limit 5 Times Set User Lockout Mode Shut Down Time 180 Seconds Set Passage Mode Language English Set Silent Mode Set Re lock Time Set Wrong Code Entry Limit Set Shut Down Time Set Language Setting Mode Operation of Lock E Touch lock with palm Enter PIN code Palm or touch the key Turn lever to of hand or fingers to confirm the selection open door to activate ASSA ABLOY the global leader in door opening solutions ARROW Lock amp Door Hardware e 80 9150 0066 010 Rev C zz REVOLUTION Change Default Master Code Before Programming Touch the screen with the palm of your hand or fingers to activate O Enter the 6 digit default Master PIN code 123456 followed by the a key Lock Response Menu mode enter number press the e key to continue Enter 1 followed by the n key Enter new 6 digit Master PIN code followed by the Ga key Press amp key to complete the process and conclude the programming session Feature Programming Through Master Code 1 Touch the screen with t
3. In the box you should find S d Quick Start Instructions Installation Instructions Door Marker Inside Escutcheon Assembly Inside Support Assembly e Inside Escutcheon e Inside Lever Handle Battery Cover a Outside Touchscreen Assembly 4 AA Alkaline Batteries Latchbolt Strike Allen Wrench 3 32 2 5mm Lever Removal Tool Screw Pack 7 screws 2 Keys If cylinder included E Parts Illustrations Outside Touchscreen Assembly Assembly Battery Cover 4 AA Alkaline Batteries Inside Lever Handle Inside Escutcheon Tools 9 Latchbolt Strike d Door Prep 2 1 8 54mm hole saw 1 26mm boring bit 5 16 8mm drill bit 7 64 2 5mm drill bit Chisel and hammer Lock Installation 2 phillips screw driver Lever removal tool supplied 3 8 or 1 2 drill 3 32 Allen wrench supplied ASSA ABLOY the global leader in door opening solutions ARROW Lock amp Door Hardware 80 9150 0066 010 Rev C ARROW suor S3ZNOLUTIOwW ASSA ABLOY L4 DOOR PREPARATION 3 4 Diameter Mark Door Verify backset before marking and drilling door Mark horizontal line across edge of door 40 5 16 1024mm from floor Fold door marker over the edge of the door centering on the horizonal line Mark centers of holes at proper backset For beveled and square edge doors mark bo
4. Lus s a des O E Lu fern O O E Lus LT den LLL Lu LL deg LLL Luo LT des LLL Des Io usp LLL Lu O E E wn fer Devo ECL esp pI 1 NA i des E wn ere O O uns i deer fr o uns LET dee L LSL wn rere O O ue i des si if d wn 1 LT dee S wn 1 L1 des O O E Lua i des i Luz LET deg S Lu usa LLL Lua i des io ASSA ABLOY the global leader in door opening solutions ARROW Lock amp Door Hardware 80 9150 0066 010 Rev C ARR RIA LS ASSA ABLOY ASSA ABLOY the global leader in door opening solutions SN OLUTIOwW ARROW USA 100 Arrow Drive New Haven CT 06536 0915 Phone 800 839 3157 Fax 800 421 6615 customer service assaabloyrss com Orders amp Customer Service Arrow Lock amp Door Hardware P O Box 3075 Salem VA 24153 Phone USA 800 839 3157 Fax 800 421 6615 Phone Canada 905 738 2466 Fax 905 738 2678 Invoice Payments Only Arrow Lock Accounts Receivable P O Box 640711 Pittsburgh PA 15264 Return Goods Only RGA Required Arrow Lock amp Door Hardware 100 Arrow Lock Drive New Haven CT 06511 Arrow Architectural Hardware ARROWDO is a registered trademark of Arrrow Architectural Hardware an ASSA ABLOY Group company Revolution is a trademark of Arrrow Architectural Hardware an ASSA ABLOY
5. Feature Supervisor User Settings Factory Defaults Entrance Authorization X x Supervisor Code 1234567890 Register Change User Code X Passage Mode Disabled Set Passage Mode X Silent Mode Disabled Set Silent Mode X Re lock Time 5 Seconds Set Language Setting Mode X Wrong Code Entry Limit 5 Times Shut Down Time 180 Seconds Programming I Button Touchscreen Language English Set Change Supervisor PIN X Set Change User PIN 1 8 x Operation of Lock Touch lock with palm Enter PIN code Palm or touch the key Turn lever to of hand or fingers to confirm the selection open door to activate ASSA ABLOY the global leader in door opening solutions ARROW Lock amp Door Hardware e 80 9150 0066 010 Rev C oe REVOLUTION Register Change PIN Codes including Supervisor Code through I Button 1 2 3 4 i 5 Unscrew battery Press the button one Enter the new Supervisor PIN Enter the first User PIN code 4 Press the button cover hex screw time code 4 to 12 digits followed by 12 digits followed by the EB key to complete the using tool the key process after the last provided Slide p playback sequence battery cover up and off to reveal the EB button located above the batteries Lock Response Register User code Lock Response Sounds a tone for Enter one Supervisor each PI
6. The lock is packed representative of how it will install on the door Before installation A Disassemble the inside escutcheon 1 Remove the inside lever with the lever removal tool provided 2 Separate the inside support assembly from the inside escutcheon B Remove the battery cover 1 Unscrew the hex screw using the Allen wrench provided The hex screw does not come completely out 2 Slide the battery cover off The outside assembly stays assembled Inside Inside Support Assembly Escutcheon qn Assembly Screws tud Determine Hand of the Door Face the door from the secure side to determine it s hand The secure side is the touchscreen side of an entrance door or the corridor side of a room door Note Revolution locks are non handed the lever can be flipped around to the desired hand ing Left Hand Reverse Left Hand Right Hand Hinges on left Hinges on left Hinges on right Opens outward Opens inward Opens inward For handed locks For handed locks for handed locks specify LHR specify LH specify RH Right Hand Reverse Hinges on right Opens outward For handed locks specify RHR ASSA ABLOY the global leader in door opening solutions O ARROW Lock amp Door Hardware 80 9150 0066 010 Rev C ARROW v o S NOLDTIOJwN ASSA ABLOY Adjust Lock for Door Thickness If Necessary Lock is packed pre adjusted for 1 3 4 44mm doors To adjust for thinner door
7. Group company Other products brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only These materials are protected under U S copyright laws All contents current at time of publication Arrow Architectural Hardware an ASSA ABLOY Group company reserves the right to change availability of any item in this catalog its design construction and or its materials Copyright 2009 Arrow Architectural Hardware an ASSA ABLOY Group company All rights reserved Reproduction in whole or in part without the express written permission of Arrow Architectural Hardware is prohibited ARROW Lock amp Door Hardware e 80 9150 0066 010 Rev C
8. fold touchscreen wire cable and lay against the back recessed area of the escutcheon assembly Position and bend wires to prevent binding when installing the escutcheon over the support assembly 13 Install and secure the 10 32 x 3 4 pan head screw through the center of the battery housing into the barrel nut of the outside assembly Slide on inside lever and push in to attach Insert four 4 AA alkaline batteries The lock responds Welcome to the Arrow Digital World Note Refer to programming instructions prior to completion of step 13 Install battery cover and tighten hex head screw with Allen wrench provided with lock HARDWARE TROUBLESHOOTING Test the Operation of the Lockset Cycle the lock in both the locked and the unlocked positions If problems are found Symptom Suggested Action Door is binding a Check that door and frame are properly aligned and door is free swinging b Check hinges They should not be loose or have excessive wear on knuckles Latchbolt will not deadlock a Either strike is out of alignment or the gap between the door and jamb is too great Realign strike or shim strike out towards flat area of latchbolt Latchbolt does not retract or extend properly Latchbolt tail and retractor are not properly positioned a Remove lockset Look though 2 1 8 hole and verify latchbolt tail is centered between top and bottom of hole b Rem
9. that bevel edge of bolt faces strike Attach with two screws supplied 2 Install strike on the door frame 3 Insert outside assembly through door making sure that the lock body frame hooks latch case and retractor engages bolt tail s DO NOT FORCE See Detail A 4 Guide motor cable through rectangular hole on inside support assembly 5 Slide inside support assembly over outside assembly lining up top and bottom screw guides with holes in door Secure both assemblies with 2 10 32 x 2 1 2 flat head machine screws Do not over tighten 6 Attach motor cable connector to the above If lock body does not engage latch inside escutcheon PC board header easily check door preparation for errors a Guide motor cable red and black wires through 2 1 8 diameter hole b Guide touchscreen cable through 3 4 diameter upper hole ASSA ABLOY the global leader in door opening solutions marked MOTOR 7 Attach the touchscreen cable connector to the inside escutcheon PC board header as illustrated 8 Select EASY or ADVANCED Mode using the switch on the back of the PC board 7 ARROW Lock amp Door Hardware 80 9150 0066 010 Rev C ASSA ABLOY A drift SZNVOLUTIOwW Directions Continued 9 Slide inside escutcheon over inside support assembly CAUTION a Position motor cable against inside support assembly Avoid pinching wires against the steel shank of the assembly b Z
10. 0 times in Advanced mode only through feature settings ASSA ABLOY the global leader in door opening solutions ARROW Lock amp Door Hardware 80 9150 0066 010 Rev C ARROW suor 2 VLUT ION ASSA ABLOY OPERATING MODES Easy Mode Provides a simple easy to use system for general use In Easy mode a total of 9 PIN codes are available for access Code assignments consist of one 1 Supervisor code and eight 8 User codes Initial programming is performed by the use of the E button located under the battery cover of the inside escutcheon and voice guided instruction Subsequent changes to programming can be performed through the touchscreen by the use of the Supervisor code While in Easy mode the lock can be programmed for Passage mode Silent mode or alternate Language settings Auto Re lock time wrong code entry limits and shut down times are not adjustable and will remain as factory default Note After initial set up individual User PIN codes can not be added to or deleted from programming Upon entering the Register Change user code function ALL existing User codes are deleted and must be re entered if needed The operating mode can be changed from Easy to Advanced or visa versa for any lock Changing the mode resets the lock to factory defaults and all prior programming and PIN codes will be lost See page 17 for more information
11. Aana SN OLDTION ASSA ABLOY Touchpad Access Cylindrical Lock Installation Instructions INSTALLER NOTE Failure to follow these instructions could result in damage to the lock and void the factory warranty For Technical Assistance contact contact ARROW LOCK 1 800 221 6529 www arrowlock com This document is available on our website in printed Spanish and French Go to www arrowlock com Click Liternature Req Este documento est disponible en espa ol en nuestra p gina de internet Vaya a www arrowlock com Presione Informaci n del Producto y Documentaci n Ce document est disponible sur notre site Web dans le francais imprim Allez www arrowlock com Cliquez sur le Information sur le produit et Documentation ASSA ABLOY the global leader in door opening solutions ARROW Lock amp Door Hardware 80 9150 0066 010 Rev C Installation Components and Tools Door Preparation Prepare Lock for Installation Install Lock Hardware Troubleshooting Programming Programming Features Menus Keys Definitions Operating Modes Easy Mode Advanced Mode Miscellaneous Information Programming Troubleshooting Sample Pin Code Management Sheets WARNINGS CAUTION Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment IMPORTANT The accuracy of the door preparation is critical for the proper functioning and secur
12. N code digit with digits Lock Response Sounds a tone for Registered then up to 8 users flashing in the sequence entered each PIN code digit with digits Msc Enter a 4 to 12 digit to confirm the entry Chime sig flashing in the sequence entered PIN code each fol nals when playback is complete to confirm the entry Chime sig lowed by the e key nals when playback is complete Press the button Lock Response Continue to enter add User te lete LR J PIN codes 4 to 12 digits each followed by the E3 key Up to eight User PIN codes can be VESTITO J O 4 Feature Programming Through Menu Mode via Supervisor Code Touch the screen with the ee palm of your hand or 1 2 3 U fingers to acitivate D gt om BO ED PIN o Enter the 4 12 digit 1 8 Supervisor PIN code 4B B followed by the 3 key TESI UE E Lock Response Menu s EA t mode enter number press the E3 key to continue amp Silent Mode gg E Enter digit corresponding gem to the function to be Be followed by the Ey R3 seting Mode AD m Got ey Follow the verbal commanas Note When registering User codes the code E E must be entered with in 20 seconds If time Press the key to complete expires no codes are registered and the process Bt t be re started the process and conclude the X 5t Pe re started programming session
13. Remove 2 screws from outside support assembly Slide outside assembly away from the lock body Disengage plate from assembly by sliding to the side and removing Re seat plate on outside assembly Plate hole is slightly off center s gray area Slide plate over assembly and slide to the center until seated in one of the two grooves Position for 1 3 4 thick doors Adjust for door thickness by seating plate in grooves on V S assembly to match door thickness Slide Plate to re seat in grooves Position for 1 3 8 thin doors Re seat plate on assembly Fasten plate and outside assembly to lock body with 2 screws How to Replace Re Key or Install Cylinder Remove oylinder handle A Insert key and rotate 45 degrees counterclockwise B Insert lever retainer tool and push C Slide lever off lock Remove the plastic sleeve from the old cylinder Slide new cylinder into sleeve Insert key into cylinder Important Make sure the key cut side of key lines up facing towards the end of the lever If the key is inserted incorrectly the lock will reassemble and might appear to properly work however when the key is removed the latchbolt will remain retracted Rotate key 45 degrees counterclockwise Depress retainer plate push the handle onto the shank until fully seated Pull on handle to insure properly seated 2 5 8 66 5 For 6 pin cylind
14. assembled Remove inside lever Remove battery cover using Allen wrench provided with lock Remove four 4 AA alkaline batteries Remove the 10 32 x 3 4 pan head screw from the center of the battery housing into the barrel nut of the q outside assembly EXT PWR REMOTE MOTOR Remove inside escutcheon On the back of the PC board change the position of the EASY ADVANCED switch To reassemble the lock refer to steps 9 through 13 on page 8 q ADVANCED EXT PWR REMOTE MOTOR To Return Lock to Programming Defaults To return the lock to programming defaults without changing the operating mode 1 6 Follow steps 1 through 6 above Insert the four 4 AA alkaline batteries The lock responds Welcome to the Arrow Digital World Remove the batteries Change the position of the EASY ADVANCED switch to original state 10 Reassemble the lock by referring to steps 9 through 13 on page 8 All programming should be returned to factory defaults Emergency Power Suppy and Battery Replacement 9V battery connections are located under the front of the outside escutcheon In the case that the 4 AA alkaline batteries are completely discharged a 9V battery can be used to supply power to the lock While connecting the 9V battery the lock can be operated as normal thus granting access so the 4 AA alkaline batteries can be replaced Dischar
15. be locked out If Group Lock out is enabled through the Supervisor code only Users corresponding to that Super visor are locked out ASSA ABLOY the global leader in door opening solutions ARROW Lock amp Door Hardware e 80 9150 0066 010 Rev C oe REVOLUTION Definitions J I Button Easy mode only Located under the battery cover the I button is used for changing the default Supervisor code and can be used for programming Low Battery When battery power is low the low battery icon will begin blinking If battery power is completely lost the emergency power supply can be used Operating Modes Revolution features the choice of Easy or Advanced operating modes The desired operating mode should be determined before the completion of lock instal lation but can be changed at a later time if required Passage Mode Easy and Advanced mode Enabling Passage mode allows continuous entry for non restricted traffic Passage mode is enabled or disabled through feature programming by either the Master or Supervisor code When the unit is in Passage Mode the green unlocked padlock will appear on the screen Master Code Advanced mode only The Master code is used for programming Supervisor codes and also for feature settings The Master code will not operate the lock Re lock Time After successful code entry and the unit unlocks it will automatically re lock after a default of five 5 seconds Re lock time is ad
16. ers 1 3 8 thick doors 2 7 8 73 For 6 pin cylinders 1 3 4 thick doors ONLY 1 3 16 30 For 6 pin cylinders 1 3 8 thick doors 1 7 16 36 5 For 6 pin cylinders 1 3 4 thick doors ONLY iL CAUTION The cylinders furnished with Revolution lock for use in 1 3 8 doors have a tailpiece that is 1 4 shorter than the standard cylinders that are furnished for 1 3 4 doors Trying te install a standard cylinder in 1 3 8 will DAMAGE the lock body ASSA ABLOY the global leader in door opening solutions ARROW Lock amp Door Hardware e 80 9150 0066 010 Rev C pan SZVOLLITION ASSA ABLOY RE INSTALL LOCK Outside Assembly Ed Touch Cable Inside Assembly Escutcheon Screw 1 10 32 x 3 4 Pan Head O With Star Washer Screw screen Support Assembly Screws Motor Gaile 2 10 32 x 2 1 2 Flat Head Machine Screws a C o gt AO Retractor Easy Touchscreen O ai r P Engages IE wm Advanced Cable o Latch Bolt Tail s Mode Connector Y 0 8 32 x 3 4 BG Flat Head Combination Screws T O FY o o EASY q LIO Engages Latchcase v C Xj 2 8 32 x 3 4 Fat Head Detail A ADVANCED Combination Screws EXT PWR REMOTE MOTOR AT WWW a aA Directions D 1 Install latchbolt in door Be sure
17. ged batteries should be replaced right away ASSA ABLOY the global leader in door opening solutions ARROW Lock amp Door Hardware 80 9150 0066 010 Rev C A drift due 9 NV JLUTIJOJwN Symptom Suggested Action Lock does not respond door is open and accessible The touchscreen will become active when pressed with the palm or fingers in at least 3 areas simultaneously e Use a larger area of the palm or fingers and verify contact with at least 3 areas If touchscreen numbers are visible check to see if they respond when pressed Check batteries are installed and oriented correctly in the battery case Check batteries are in good condition replace batteries if discharged page 17 Check to see if touchscreen cable is properly connected and not pinched page 7 Lock does not respond door is locked and inaccessible Batteries may be completely discharged e Use mechanical key to gain entry and replace batteries e Connect a 9 volt battery to the emergency power supply terminal which is located on the outside escutcheon under the lever With the 9 volt battery con nected palm the touchscreen enter PIN code and palm touchscreen again page 17 Replace batteries The unit is on for a while and then shows no reaction Lights dim The batteries do not have enough power Replace the batteries Unit chimes to indicate code accep tance but the door will not open Check to see if there i
18. he palm of your hand or fingers to acitivate G 2 Enter the 6 digit Master PIN code followed by the Ga key Lock Response Menu mode enter number press the B key to continue 3 Enter digit corresponding to the function to be performed followed by the a key Follow the verbal commands 4 Press the amp key to complete the process and conclude the programming session G nO0d p og S 8p g mn 0 00 00 19 amp n Bo g 00 19 ag D DO mBB0 0 B8 pD ENBO O0 8 B gt E0 gt 0 8g g g ASSA ABLOY the global leader in door opening solutions ARROW Lock amp Door Hardware 80 9150 0066 010 Rev C mer e VOLLITION ASSA ABLOY Set Up Supervisor Codes 1 Touch the screen with the palm of your hand or fingers to acitivate Gg 2 Enter the 6 digit Master PIN code followed by the a key Lock Response Menu mode enter number press the key to continue Enter 2 followed by the B key Enter 1 followed by the a key Enter the Supervisor number to register 00 19 followed by the Ga key Enter a 4 12 digit PIN code for the Supervisor number followed by the Ga key Press the amp 3 key to complete the process and conclude the programming session Feature Programming Through Supervisor Code B 1 Touch the screen with the palm of your hand or fingers to activate 2 Enter the 4 12 digit Supervisor PIN code followed by the a key L
19. ity of this cylindrical product Misalignment can cause premature wear and a lessening of security Finish Care This lockset is designed to provide the highest standard of product quality and performance Care should be taken to insure a long lasting finish When cleaning is required use a soft damp cloth Using lacquer thinner caustic soaps abrasive cleaners or polishes could damage the coating and result in tarnishing INTRODUCTION Arrow Revolution Stand alone Touchscreen Access Lock combines robust cylindrical locksets with a contemporary electronic aesthetic Users benefit from an interactive touchscreen that makes day to day access effortless and offers voice guided programming for simple updates to user information in the event of staffing changes or security breaches Revolution is engineered for quick and easy installation and fits into the standard ANSI BHMA A156 115 cylindrical locks with lever door prep with only one additional 3 4 hole and 7 screws including latchbolt and strike Revolution features the choice of Easy or Advanced operating modes Locks are shipped as a default from the factory in Easy mode The desired operating mode should be determined before the completion of lock installation but can be changed at a later time if required ASSA ABLOY the global leader in door opening solutions ARROW Lock amp Door Hardware e 80 9150 0066 010 Rev C S NVOLUTIOwW COMPONENTS AND TOOLS ASSA ABLOY
20. justable from one 1 to ten 10 seconds in Advanced mode only through feature settings Shut Down Time The unit will shut down for a default of one hundred and eighty 180 sec onds and not allow operation after the wrong code entry limit has been met Shut down time is adjustable from one 1 to two hundred and fifty five 255 seconds in Advanced mode only through feature settings When the unit is in Shut Down the red locked pad lock icon will be flashing Silent Mode Easy and Advanced mode Enabling Silent mode shuts off the code confir mation tone playback for use in quiet areas Silent mode is enabled or disabled through feature programming by either the Master or Supervisor code Status LED Located on inside escutcheon Flashes green to indicate lock in Passage mode Supervisor Code Easy and Advanced mode The Supervisor code is used for program ming User codes and also for feature settings The Supervisor code will operate the lock User Code Easy and Advanced mode The User code is used for operating the lock User Lockout Advanced mode only This feature can be enabled only by the Supervisor code When enabled it restricts User PIN code access only for specified User numbers corresponding to that Supervisor Wrong Code Entry Limit After a default of five 5 unsuccessful attempts at entering a valid PIN code the unit will shut down and not allow operation Wrong code entry limit is ad justable from one 1 to ten 1
21. ly the Master or Supervisor can enable Lockout Mode e Contact the Master user or Supervisor Upon entering a PIN code and pressing the key the red padlock icon ap pears and there are different tones Check to see if either you or your group is set at Lockout Mode Setting managing Lockout Mode is up to Master and Supervisor Contact the Master user or Supervisor The unit operates but it makes no sound Check to see if Silent Mode is enabled page 13 15 The unit responds Low Battery This is the voice alarm alerting that it is time to replace the batteries Replace all four 4 batteries with new AA Alkaline batteries Upon entering a PIN code and pressing the star key the unit responds Wrong digit numbers The digits entered were incorrect or incomplete Re enter the code ASSA ABLOY the global leader in door opening solutions ARROW Lock amp Door Hardware e 80 9150 0066 010 Rev C Soeur 3 N OLUTIJwW ASSA ABLOY PIN CODE MANAGEMENT SAMPLE SHEETS Easy Mode PIN Code Management mE Number Door Number Doom To mma TO me om mp L wo Lo J poo om EE OZ O 3 EE we S a I L ws lw o we o lw I T S Dr je we lw o uus me or mim Te mos EAD EE que RR ETA L1 des O LL EE dees _ Pisco ere Lu ere L L L
22. ock Response Menu mode enter number press the a key to continue Enter digit corresponding to the function to be performed followed by the a key Follow the verbal commands Press the amp key to complete the process and conclude the programming session 3 5 8 a Register User Code p 0 B un amp G gt PINI E 3 01 49 Group User Lockout Mode E E Disable Bm gm g9 gED 3g 01 49 P3 Passage Mode o u o Disable kc To Set Up User Codes User Codes can only be programmed through Supervisor Code 1 Touch the screen with the palm of your hand or fingers to acitivate g 2 Enter the 4 12 digit Supervisor PIN code followed by the a key Lock Response Menu mode enter number press the key to continue Enter 1 followed by the a key Enter 1 again followed by the a key Enter the User number to be registered 01 49 followed by the key Enter a 4 12 digit PIN code for the User number followed by the a key Press the key to complete the process and conclude the programming session ASSA ABLOY the global leader in door opening solutions ARROW Lock amp Door Hardware e 80 9150 0066 010 Rev C oe REVOLUTION MISCELLANEOUS INFORMATION To Change Operating Modes Note Changing the operating mode from Easy to Advanced or vice versa deletes all Easy Advanced Setting prior programming The outside assembly remains
23. ove latchbolt and insert lockset Look though latchbolt hole and verify retractor mouth centered in hole If not adjust outside rose plate C If necessary rebore holes to line up retractor and tail ASSA ABLOY the global leader in door opening solutions ARROW Lock amp Door Hardware e 80 9150 0066 010 Rev C oe REVOLUTION PROGRAMMING Programming Features Menus Keys Definitions Operating Modes Easy Mode Advanced Mode Miscellaneous Information Programming Troubleshooting Sample Pin Code Management Sheets PROGRAMMING FEATURES MENUS KEYS DEFINITIONS Outside HEX Screw Numbers Battery Cover Button Alkaline Batteries Lockout Mode Status LED Speaker Emergency Power Supply Terminal 9 Volt Batteries Purchased Separately ASSA ABLOY the global leader in door opening solutions ARROW Lock amp Door Hardware 80 9150 0066 010 Rev C A drift ASSA ABLOY Menu and Icons S SVILUTION P Touch the screen with palm of hand or fingers to begin and end actions Enter Master PIN code 6 digits in length Advanced Mode only Factory default 123456 Click the indicated number Enter Supervisor PIN code Can be 4 12 digits in length Factory default 1234567890 Press the Star key on the touchscreen to Enter or Accept entry Enter User PIN Can be 4 12 digits in length Press the Pound key on the to
24. s another locking device on the door i e deadbolt Check the door gaps for any foreign objects between door and frame Check that the motor cable is firmly connected to the PC board header marked MOTOR page 7 Unit operates to allow access but will not automatically re lock Check to see if Passage Mode is enabled pages 15 16 e Ifthe Passage Mode icon on the touchscreen and the status indicator on the e interior escutcheon flicker for several seconds it is set at Passage Mode page 9 Disable Passage Mode to lock the door If low battery indicator is lit page 10 change batteries PIN codes will not register PIN codes must consist of 4 to 12 digits to register The same PIN code cannot be used for multiple users In Advanced Mode registration management of PIN codes is set at the authority of Master and or Supervisor e Contact the Master or Supervisor In Advanced mode the Master PIN code does not unlock the door In Easy Mode User codes must be entered within 20 seconds while the touchscreen is active or the process will have to be restarted In Easy Mode the Supervisor PIN code can only be registered using the I Button The star or pound can not be used as part of the PIN code Upon entering a PIN code and pressing the star key the unit displays and invalid code error or the lock times out without responding Either All Code Group or User Lockout Mode is enabled 15 16 On
25. th sides of the door Drill Door A Drill 2 1 8 54mm dia hole through the door Cut notches as shown on template Note To avoid splintering wood doors drill holes A and D from both sides of the door Drill 3 4 19mm diameter hole through the door according to door marker Drill 1 25mm diameter hole in edge of door Mortise for latchbolt front 1 1 8 29mm wide x 2 1 4 57mm high by 5 32 deep Drill two 2 5 16 8mm diameter holes through door see note above Drill pilot holes for latchbolt screws 7 64 2 5mm V18 Standard Strikes Strike Box Prepare and Install Strike Wood Frames Only A Close the door and mark a horizontal line from the center of the template to the frame of the door B Measure half the thickness of the door Mark this same ataca eds distance with a vertical line starting from the stop side 81 2012 0416 of the frame Where both lines cross make a 1 25mm 8 8 32x3 4 diameter hole 1 2 13 mm in depth T Align the holes of the strike with the vertical line Optional Strike Trace the outline of the strike and mortise with Box iV10 a 1 16 1 6mm depth Attach the strike with two screws provided Attaching Screws 81 2012 0620 12 12 24x1 ASSA ABLOY the global leader in door opening solutions ARROW Lock amp Door Hardware e 80 9150 0066 010 Rev C z REVOLUTION PREPARE LOCK FOR INSTALLATION Unpack the Lock p
26. uchscreen to enter Menu mode Supervisor Serial Number 00 19 Advanced Mode only Press this key to return to the previous Step or menu setting User Serial Number 01 49 Advanced mode only Repeat operation using settings indicated Enter value 1 10 times or seconds The I Button is located under the battery cover Remove battery cover for access Enter value 1 255 seconds Slide the batter cover up and off Voice guide Low Battery 4 Definitions 5 Advanced Mode See Advanced Mode on page 14 All Code Lockout Advanced mode only This feature is enabled only by the Master code When enabled it restricts all user PIN code access When the unit is in Lockout the red locked padlock will appear on the screen Easy Mode See Easy Mode on page 12 Emergency Power Supply 9V battery connections are located under the front of the outside escutcheon In the case that the 4 AA alkaline batteries are completely dis charged a 9V battery can be used to supply power to the lock While connecting the 9V battery the lock can be operated as normal thus granting access so the 4 AA alkaline batteries can be replaced Group Lockout Advanced mode only This feature can be enabled by either the Master code or the Supervisor code If Group Lockout is enabled through the Master code specific Supervisors and their entire group of Users will
Download Pdf Manuals
Related Search