USER MANUAL - Rexing Online Store
Contents
1. 16 9 Wide Dynamic Range Ea Charging via USB Charger Battery Power Level Microphone Mute Microphone On Video Recording Mode Video Playback Mode Photo Mode Loop Recording Memory Card Inserted G Sensor Sensitivity sgn s OB E White Balance Status 2015 REXING All Rights Reserved Getting Started Unpacking your V1 Dashboard Camera Package Contents Check the product box for the following items V1 Dashboard Camera Operating manual Mounting holder for camera adhesive mount type USB cable Car charger The items supplied with the device and any available accessories may vary depending on the region Appearances and specifications are subject to change without prior notice Availability of all accessories is subject to change depending entirely on manufacturing companies All supplied items are designed for use only with this device and may not be compatible with other devices Malfunctions resulting from the use of unapproved accessories are not covered by the warranty service For more information about available accessories refer to the Rexing website at www rexingusa com 18 2015 REXING All Rights Reserved Getting Started Installing your V1 Dashboard Camera Installation N wo Attaching the camera to the window mount Before the device can be used in a car it is essential to first install a properly attached window mount Make sure that2. Dashboard Camera Formatting the memory card continued 3 Press the DOWN button to navigate to the Format option 4 Press OK to confirm your selection 5 Press the UP button once 6 Press OK when the word YES is highlighted in blue Before formatting a memory card always remember to make backup copies of all important data stored on the device The manufacturer s warranty does not cover loss of data resulting from user actions 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera Turning the Device On and Off Turning the Device On and Off Press and hold the ON OFF button for a few seconds to turn on the device A welcome message will be displayed onscreen as shown in the image below RENING To turn off the device again press and hold the ON OFF button for a few seconds A goodbye message will be displayed onscreen as shown in the image below REX ING Note The V1 Dashboard Camera will switch on and off automatically if you keep it permanently connected to the car charger 25 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera System Video Settings SYSTEM VIDEO SETTINGS Date Time Setup Use the following procedure to change the device s time and date 1 Press MENU twice to enter System Settings 2 Press the DOWN button to navigate to the Date Time option 3 Press OK to view date time in the format YYYY MM DD HH MM SS 4 Press the UP or DOWN butto
3. Press the UP or DOWN button to enable or disable this feature 5 Press OK to confirm your entry 6 Press MENU to exit System Settings 32 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera System Video Settings Light Frequency This option should be set according to the power supply specification used in your country or geographical region U S users should select the 60Hz option 1 Press MENU twice to enter System Settings 2 Press the UP or DOWN button to navigate to the LIGHT FREQ option 3 Press OK to view the current selection 50Hz 60Hz 4 Press the UP or DOWN button to make your selection 5 Press OK to confirm your entry 6 Press MENU to exit System Settings Exposure Adjust the camera exposure value for brighter or darker recorded video according to your preference 1 Press MENU once to enter Video Settings 2 Press the UP or DOWN button to navigate to the Exposure option 3 Press OK to view the current selection 0 0 1 3 1 3 etc 4 Press the UP or DOWN button to make your selection 5 Press OK to confirm your entry 6 Press MENU to exit Video Settings 33 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera System Video Settings Plate Number Enable this feature to enter a vehicle plate number for video recording 1 Press MENU once to enter Video Settings 2 Press the UP or DOWN button to navigate to the Plate Number option 3 Press OK
4. N button to make your selection Press OK to confirm your entry Press MENU to exit Photo Settings Press OK to capture an image 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera Photo Settings Exposure This setting allows you to adjust the brightness level of captured images The 0 0 setting is recommended o Nogo AON Press MODE once to enter Photo Mode Press MENU once to enter Photo Settings Press the UP or DOWN button to navigate to the Color option Press OK to view the current selection 0 0 1 3 1 3 etc Press the UP or DOWN button to make your selection Press OK to confirm your entry Press MENU to exit Photo Settings Press OK to capture an image Anti Shaking This feature enables the image stabilizer function to reduce blurring of captured images ONOOFR WD Press MODE once to enter Photo Mode Press MENU once to enter Photo Settings Press the UP or DOWN button to navigate to the Anti Shaking option Press OK to view the current ON OFF status for this feature Press the UP or DOWN button to enable or disable this feature Press OK to confirm your entry Press MENU to exit Photo Settings Press OK to capture an image 41 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera Photo Settings Quick Review Enabling this feature will allow you to immediately view each captured image for a few seconds before taking the ne
5. ReEXING USER MANUAL All brand and product names are trademarks or registered trademarks of SHENZHEN JIAFENG ZHUOYUE DIGITAL COMMUNICATION TECHNOLOGY CO LTD The information in this manual is subject to change without notice www rexingusa com 11 2015R1 0 1 2015 REXING All Rights Reserved Safety information To prevent injury to yourself or others or damage to your device read all safety information before using A Warning Failure to comply with safety warnings and regulations can result in serious injury or death Do not use damaged power cords or plugs or loose electrical sockets Faulty connections can cause electric shock or fire Do not touch the car charger with wet hands or disconnect the charger by pulling the cord Doing so may result in electrocution Do not use a bent or damaged car charger Doing so may cause electric shock or fire Do not use your device while it is charging or touch your device with wet hands Doing so may cause electric shock Do not short circuit the charger or the device Doing so may cause electric shock or fire or cause the battery to malfunction or explode Use only manufacturer approved batteries chargers accessories and supplies e Using generic batteries or chargers may shorten the life of your device or cause the device to malfunction They may also cause fire or cause the battery to explode 2 2015 REXING All Rights Reserved Use only the manufacture
6. d Hazy images Lens may be dirty Carefully clean dust or fingerprints from the lens with a microfiber cloth Horizontal stripes appear on images The Light Frequency setting is incorrect Change light frequency setting to match the power supply used in your country or geographical location US users should select the 60Hz option SG MY users should select the 50hz option 46 2015 REXING All Rights Reserved
7. ecommended that you reformat a memory card after every time that images are transferred from it to a computer or at least once a month 22 2015 REXING All Rights Reserved Getting Started Installing your V1 Dashboard Camera Reformatting a memory card keeps important elements of data and file structure Clean helping to prevent error messages and missing images Reformatting also restores the memory card which can help prevent it from becoming corrupted Removing the memory card Before removing a memory card from your computer you must first unmount it for safe removal Before removing a memory card from your device 1 Press the REC button to stop the device from recording 2 Press and hold the ON OFF button to switch off the device 3 Gently push the memory card in and let go until it unlocks Do not remove the memory card while the device is transferring or accessing information Doing so can result in data loss or corruption or damage to the memory card or device Rexing is not responsible for losses that result from the use of damaged memory cards including the loss of data Formatting the memory card You may choose to format your memory card with either the device or a computer To use the device for formatting a memory card 1 Press the REC button to stop the device from recording 2 Press the MENU button twice to enter System Settings 23 2015 REXING All Rights Reserved Getting Started Installing your V1
8. ect ALL and press OK 6 Press OK again to delete all files 36 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera Photo Settings PHOTO SETTINGS Resolution This option allows you to set the pixel resolution for captured images 1 Press MODE once to enter Photo Mode 2 Press MENU once to enter Photo Settings 3 Press the UP or DOWN button to navigate to the Resolution option 4 Press OK to view current selection 12M 4032x3024 10M 3648x2736 etc Press the UP or DOWN button to make your selection 6 Press OK to confirm your entry 7 Press MENU to exit Photo Settings 8 Press OK to capture an image oa Capture Mode With this feature you can set a timer for automatically capturing images 1 Press MODE once to enter Photo Mode 2 Press MENU once to enter Photo Settings 3 Press the UP or DOWN button to navigate to the Capture Mode option 4 Press OK to view the current selection 2SEC 5SEC 10SEC Press the UP or DOWN button to make your selection 6 Press OK to confirm your entry 7 Press MENU to exit Photo Settings 8 Press OK to start the timer on 37 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera Photo Settings Sequence Mode This feature allows you to capture a sequence of 3 quick photos with one button press 1 Press MODE once to enter Photo Mode 2 Press MENU once to enter Photo Settings 3 Press the UP or DOWN button to navigate to the Seq
9. equency Exposure Plate Number Parking Monitor Restoring Factory Settings Playback Mode Deleting Files Photo Settings Resolution Capture Mode Sequence Mode Quality Sharpness White Balance Color ISO Exposure Anti Shaking Quick Review Date and Time Stamp Playback Mode Updating Firmware General Troubleshooting 13 2015 REXING All Rights Reserved PRODUCT SPECIFICATIONS Image Sensor 5MP CMOS Lens Fixed focus with full glass elements Aperture F 2 8 CPU Novatek LCD 2 4 inch 4 3 TFT Audio Built in high sensitivity microphone speaker External Memory Class 10 or aboveTF card SDHC spec up to 32G Gravity Sensor Low Medium High OFF Motion Detect ON OFF Shutter Electronic White Balance Auto Exposure Auto ISO TV Interface None Battery Optional 320mAh 3 7V rechargeable lithium ion battery Video Format MOV Video Resolution 1920x1080P30 1280x720P30 848x480P30 640x480P30 English Traditional Chinese French Spanish Portuguese Languages German Italian Russian Japanese USB USB 2 0 Loop Recording 3 min 5 min 10 min OFF Auto Screen Off 3 min 5 min 10 min OFF Auto Shutdown 3 min 5 min 10 min OFF Microphone Mute ON OFF 14 2015 REXING All Rights Reserved Getting Started Overview of your V1 Dashboard Camera Device Layout 1 Mode Button 6 MircoSD Card Slot 2 Up Navigation Button 7 Power O
10. facilities over which Rexing has no control Without limiting the generality of this disclaimer Rexing expressly disclaims any responsibility or liability for any interruption or suspension of any content or service made available through this device Rexing is neither responsible nor liable for customer service related to the content and services Any question or request for service relating to the content or services should be made directly to the respective content and service providers 2015 REXING All Rights Reserved About this manual This device provides high quality digital recording using Rexing s high standards of design construction and technological expertise This user manual describes the device s functions and features in detail Please read this manual before using the device to ensure safe and proper use Note that all descriptions included here are based on the device s default settings Images and screenshots may differ in appearance from the actual product Content may differ from the final product or from software provided by service providers and is subject to change without prior notice For the latest version of this manual refer to the Rexing website at www rexingusa com Available features and additional services may vary by device and software Applications and their functions may vary by country region or hardware specifications Rexing is not liable for performance issues caused by application
11. in countries with separate waste collection systems Waste Electrical amp Electronic Equipment This symbol found on the device accessories or accompanying literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for information on where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal 8 2015 REXING All Rights Reserved Disclaimer Some content and services accessible through this device belong to third parties and are protected by copyright patent trademark and or other intellectual property laws Such content and services are provided solely for your personal non commercial use You may not use any content or services in a manner that has not been authorized by the content owner or service provider Without limiting the foregoing unless expressly autho
12. ion explode or cause a fire e Remember that over time even an unused device will discharge and must be recharged again before use 6 2015 REXING All Rights Reserved e Disconnect the charger from power sources when not in use e Your device may wear out over time Some parts and repairs are covered by the warranty within the validity period but damage or deterioration related to the use of unapproved accessories is not Do not attempt to disassemble repair or modify your device e Any changes or modifications to your device can void your manufacturer s warranty If your device needs servicing take it to an authorized Rexing Service Center e Do not disassemble or puncture the battery as this can result in fire or explosion e Always turn off the device before removing the battery If you remove the battery with the device turned on it may cause the device to malfunction Clean your device and charger by wiping with a towel or eraser Do not use chemicals or detergents Doing so can discolor or corrode the outside of the device and may result in electric shock or fire Do not distribute copyright protected material Doing so without the permission of the content owners may violate copyright laws The manufacturer is not responsible or liable for any legal issues that result from the user s illegal use of copyrighted material 7 2015 REXING All Rights Reserved Correct disposal of this product applicable
13. lanced lighting and clearer recorded video 1 Press MENU once to enter Video Settings 2 Press the UP or DOWN button to navigate to the WDR option 3 Press OK to view the current ON OFF status for this feature 4 Press the UP or DOWN button to enable or disable this feature 5 Press OK to confirm your entry 6 Press MENU to exit Video Settings 31 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera System Video Settings Gravity Sensing This feature acts as an accelerometer measuring physical and gravitational forces acting on the camera itself In the event that such forces are detected the device will perform an automatic file lock Locked video files cannot be erased during Loop Recording they remain on the memory card until manually deleted or the card is reformatted We recommend that you use the Low setting for this feature 1 Press MENU once to enter Video Settings 2 Press the UP or DOWN button to navigate to the Gravity Sensing option 3 Press OK to view the current selection Low Medium High OFF 4 Press the UP or DOWN button to make your selection 5 Press OK to confirm your entry 6 Press MENU to exit Video Settings Beep Sound This setting allows you to turn the device s button sound effect on or off 1 Press MENU once to enter System Settings 2 Press the UP or DOWN button to navigate to the Beep Sound option 3 Press OK to view the current ON OFF status for this feature 4
14. lection 5 Press OK to confirm your entry 6 Press MENU to exit Video Settings 28 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera System Video Settings Recording Audio You may choose to record audio with video or turn off the microphone so that all recorded videos will be muted 1 Press MENU once to enter Video Settings 2 Press the UP or DOWN button to navigate to the Record Audio option 3 Press OK to view the current ON OFF status for this feature 4 Press the UP or DOWN buiton to enable or disable this feature 5 Press OK to confirm your entry 6 Press MENU to exit Video Settings Alternatively you can use a hot key shortcut for this feature During Recording Mode press the DOWN button to mute unmute the microphone for video recording 29 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera System Video Settings LCD Display Screen Saver Select a time duration for the screen to stay lit after recording starts If you cannot find this option please follow instructions for installing the latest firmware update page 43 1 Press MENU twice to enter System Settings 2 Press the UP or DOWN button to navigate to the Screen Saver option 3 Press OK to view the current selection 3min Smin 10min OFF 4 Press the UP or DOWN button to make your selection 5 Press OK to confirm your entry 6 Press MENU to exit System Settings Alternatively you can use a hot ke
15. lide show Press MENU to stop the slide show ONDA WDM 43 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera Updating Firmware Updating Firmware The following procedure will allow you to use the Rexing website to update firmware for your V1 Dashboard Camera This is necessary for enabling all available features on your device 1 Download the firmware file to your computer from the Rexing website at http firmware rexingusa coml 2 Unzip the file 3 Format a memory card using either your computer or your device 4 Copy the files FW96650A bin logo jpg and logo2 jpg from your computer to the root directory of your memory card 5 Unmount memory card from the computer and insert it into the camera 6 Make sure the camera is plugged in and power it on 7 The camera will update automatically The screen will stay off but the status indicator will light up this updating process will take 30 60 seconds 8 When the update is complete remove the memory card and test the device with another memory card 9 Using your computer be sure to delete the 3 copied firmware files from the first memory card before using it again in your camera otherwise it will restart the same update process every time you use it 2015 REXING All Rights Reserved General Troubleshooting Operating your V1 Dashboard Camera General Troubleshooting Problem Possible Cause Solution The captured image is not
16. n Off Switch Record Button 8 Reset Button 3 OK Confirm Button 9 Menu Button Emergency Lock Button 10 Lens Angle Adjuster 4 Down Navigation Button 11 USB Charging Port Mute Unmute Button 12 GPS Module Port 5 Screen On Off Button 13 Rear Camera Port For future upgrade not yet supported 15 2015 REXING All Rights Reserved Getting Started Understanding your V1 Dashboard Camera Buttons Button Functions POWER Press and hold to turn the device on or off A OK e Press to confirm a selection while in Setting Mode e Recording Mode Hot Key Emergency Lock Press to manually lock the file during recording MENU Press to enter and exit Settings Mode e Press to navigate UP through options in Settings Mode Recording Mode Hot Key Record Press to start stop recording e Press to navigate DOWN through options in Settings Mode e Recording Mode Hot Key Mute Press to mute un mute the microphone during recording MODE Select Press to toggle between Recording Photo Playback modes aim ole SCREEN Press to turn screen on off during recording RESET Press and hold for 4 seconds to reset the device in the event that it operates erratically hangs up or freezes 16 2015 REXING All Rights Reserved Status Icons Getting Started Understanding your V1 Dashboard Camera Icon Meaning Video Resolution set to Full HD1080P 1920X1080
17. n to change the highlighted number 5 Press OK to move to the next date time segment and repeat step 4 6 Press OK again to confirm your entry 7 Press MENU to exit System Settings Note If the battery remains fully discharged or is removed from the device the time and date will be reset Language Use the following procedure to change the device s time and date Language availability may vary depending on the region 1 Press MENU twice to enter System Settings 2 Press the DOWN button to navigate to the Language option 3 Press OK to view the current language selection 4 Press the UP or DOWN button to change the selection 5 Press OK again to confirm your choice 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera System Video Settings Resolution Use the following procedure to set the recording resolution Press MENU once to enter Video Settings Press the UP or DOWN button to navigate to the Resolution option Press OK to view available resolutions 1080FHD 1920x1080 720P 1280x720 etc Press the UP or DOWN button to make your selection Press OK to confirm your entry Press MENU to exit Video Settings Press OK to start recording Press OK again to stop recording wr OO Oe OV Date and Time Stamp You have the option to display the date and time in your videos Note that the date and time stamp cannot be removed from videos if this feature was enabled at the time of recordi
18. n use the device make sure they use the device properly e Never use a damaged charger or battery Do not handle a damaged or leaking lithium ion Li lon battery For safe disposal of your Li lon battery contact your nearest authorized service center 4 2015 REXING All Rights Reserved A Caution Failure to comply with safety precautions and regulations can result in property damage serious injury or death Do not use your device near other electronic devices Most electronic devices use radio frequency signals Your device may interfere with other nearby electronic devices Do not use your device near other devices that emit radio signals such as sound systems or radio towers Radio signals from these may cause your device to malfunction Do not expose the device to heavy smoke or fumes Doing so may damage the outside of the device or cause it to malfunction If you notice strange smells or sounds coming from your device or the battery or if you see smoke or liquid leaking from the device or battery stop using the device immediately and take it to a Rexing Service Center Failure to do so may result in fire or explosion For your own safety do not operate the controls of this product while driving Two window mounts are needed when using the recorder in a car Make sure that you place the recorder in a location where it will not obstruct the driver s view Always keep the camera lens clean and ensure that the lens i
19. ng 1 Press MENU once to enter Video Settings 2 Press the UP or DOWN button to navigate to the Date Stamp option 3 Press OK to view the current ON OFF status for this feature 4 Press the UP or DOWN button to enable or disable this feature 5 Press OK to confirm your entry 6 Press MENU to exit Video Settings 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera System Video Settings Loop Recording With Loop Recording Mode enabled the device will continuously erase older video as it records new video keeping only the images captured over a user selected time range All video older than this range will be replaced with new video Note any locked video files on the memory card will remain protected and will not be automatically deleted during Loop Recording It is recommended that you reformat a memory card after every time that images are transferred from it to a computer or at least once a month This keeps important elements of data and file structure clean helping to prevent error messages and missing images Remember to always make backup copies of all important data stored on the device The manufacturer s warranty does not cover loss of data resulting from user actions 1 Press MENU once to enter Video Settings 2 Press the UP or DOWN button to navigate to the Loop Recording option 3 Press OK to view the current selection 3min 5min 10min OFF 4 Press the UP or DOWN button to make your se
20. r approved battery and charger specifically designed for your device Using an incompatible battery or charger can cause serious personal injury or damage to your device Rexing cannot be responsible for the user s safety when using accessories or supplies that are not approved by Rexing Do not drop the charger or device or subject them to impact Handle and dispose of the charger and device with care Never crush or puncture the device Never dispose of the battery or device in a fire Never place the battery or device in or on heating devices such as microwave ovens stoves or radiators The battery or device may explode if overheated Follow all local regulations when disposing of a used battery or device Avoid exposing the device to high external pressure which can lead to an internal short circuit and overheating Protect the device battery and charger from damage Avoid exposing your device or battery to excessive cold or heat Extreme temperatures can damage the device and reduce the charging capacity and life of your device and battery Prevent the battery from coming into contact with metal objects as this can create a connection between the and terminals leading to temporary or permanent battery damage 3 2015 REXING All Rights Reserved e Do not allow children or animals to bite or chew the device or battery Doing so can result in fire or explosion and small parts can be a choking hazard If childre
21. rized by the applicable content owner or service provider you may not modify copy republish upload post transmit translate sell create derivative works exploit or distribute in any manner or medium any content or services displayed through this device THIRD PARTY CONTENT AND SERVICES ARE PROVIDED AS IS REXING DOES NOT WARRANT CONTENT OR SERVICES SO PROVIDED EITHER EXPRESSLY OR IMPLIEDLY FOR ANY PURPOSE REXING EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REXING DOES NOT GUARANTEE THE ACCURACY VALIDITY TIMELINESS LEGALITY OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE SHALL REXING BE LIABLE WHETHER IN CONTRACT OR TORT FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES ATTORNEY FEES EXPENSES OR ANY OTHER DAMAGES ARISING OUT OF OR IN CONNECTION WITH ANY INFORMATION CONTAINED IN OR AS A RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 9 2015 REXING All Rights Reserved Third party services may be terminated or interrupted at any time and Rexing makes no representation or warranty that any content or service will remain available for any period of time Content and services are transmitted by third parties by means of networks and transmission
22. ronments The AUTO setting is recommended for most situations 1 Press MODE once to enter Photo Mode 2 Press MENU once to enter Photo Settings 3 Press the UP or DOWN button to navigate to the White Balance option 4 Press OK to view the current selection AUTO DAYLIGHT CLOUDY TUNGSTEN FLUORESCENT 5 Press the UP or DOWN button to make your selection 6 Press OK to confirm your entry 7 Press MENU to exit Photo Settings 8 Press OK to capture an image 39 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera Photo Settings Color This feature allows you to choose a color effect for captured images OND WDM Press MODE once to enter Photo Mode Press MENU once to enter Photo Settings Press the UP or DOWN button to navigate to the Color option Press OK to view the current selection Color Black amp White Sepia Press the UP or DOWN button to make your selection Press OK to confirm your entry Press MENU to exit Photo Settings Press OK to capture an image ISO This setting enable you to adjust the camera s sensitivity to light when taking photos The higher the number the greater the light sensitivity The AUTO setting is recommended ONO WD Press MODE once to enter Photo Mode Press MENU once to enter Photo Settings Press the UP or DOWN button to navigate to the Color option Press OK to view the current selection 100 200 400 AUTO Press the UP or DOW
23. s from any provider other than Rexing Rexing is not liable for performance issues or incompatibilities caused by failure to install the device as stated in this manual Attempting to customize the installation may cause the device or applications to work improperly which may result in device malfunctions and data corruption or loss These actions are violations of your Rexing agreement and will void your warranty Default applications that come with the device are subject to updates and possible discontinuation of support without prior notice If you have questions about an application provided with the device contact an authorized Rexing Service Center 11 2015 REXING All Rights Reserved Table of Contents PRODUCT SPECIFICATIONS GETTING STARTED Overview of your V1 Dashboard Camera Device Layout Understanding your V1 Dashboard Camera Buttons Status Icons Unpacking your V1 Dashboard Camera Package Contents Installing your V1 Dashboard Camera Installation Charging the Battery Inserting the Memory Card Removing the Memory Card Formatting the Memory Card OPERATING YOUR V1 DASHBOARD CAMERA Turning the Device On and Off System Video Settings Date Time Setup Language Recording Mode Resolution Date and Time Stamp Loop Recording Recording Audio LCD Display Auto Power Off Motion Detector WDR Wide Dynamic Range 12 2015 REXING All Rights Reserved Table of Contents continued Gravity Sensing Beep Sound Light Fr
24. s not blocked by any object or placed near any reflective material If the car s windshield is tinted with a dark coating recording quality may be affected 5 2015 REXING All Rights Reserved Do not store your device in excessively hot cold damp or dry locations Doing so may cause the screen to malfunction result in damage to the device or cause the battery to explode Your device is recommended for use within a temperature range of 10 C to 70 C and a humidity range of 10 to 80 If your device becomes overheated allow it to cool down before use Prolonged exposure of skin to an overheated device may cause low temperature burn symptoms such as red spots or areas of darker pigmentation Install mobile devices and equipment with caution e Ensure that any mobile devices or related equipment installed in your vehicle are securely mounted e Avoid placing your device and accessories in or near an airbag deployment area Improperly installed wired equipment can cause serious injury in a situation where airbags inflate rapidly Do not drop your device or subject your device to impact If the device is bent deformed or damaged malfunction may occur Take care to maximum battery and charger life e Avoid charging your device for longer than a week as overcharging may shorten battery life e Leaving batteries unused over time may reduce their performance and lifespan Unused batteries may also be more likely to malfunct
25. stored 1 Memory card may be full or malfunctioning 2 Image not being saved before the device is powered off 1 Reformat memory card or replace with a new one 2 Make sure to stop recording before shutting down All buttons are not 1 Processing error or faulty device operation 1 Press the RESET button to restart the camera responding 2 Memory card may contain 2 Reformat memory card or errors or is damaged replace with a new card a millet Battery may be depleted Charge the battery Screen powers off unexpectedly 1 Screen Saver feature is enabled 2 Low battery 1 Disable Screen Saver feature 2 Charge the battery Unable to record videos 1 Memory card may be full 2 If Loop Recording has been enabled memory card may be corrupted 1 Check remaining space on memory card and delete files if necessary 2 Reformat your memory card if issue persists replace with a new one 45 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera General Troubleshooting General Troubleshooting continued Problem Possible Cause Solution Recording stops unexpect edly in Video Mode Incompatible memory card is inserted Use a compatible class 10 microSD card with a capacity of at least 8GB File error is encountered when trying to play back pictures or video Memory card may be corrupted with bad sectors Reformat the memory car
26. tely discharged the device will not turn on immediately when the charger is connected Allow a depleted battery to charge for a few minutes before attempting to turn on the device The device can be used while it is charging although it may take longer to fully charge the battery If the device receives an unstable power supply while charging the screen may not function properly If this happens unplug the charger from the device 2015 REXING All Rights Reserved e While charging the device may heat up This is normal and should not affect the device s performance or lifespan e If the device is not charging properly take the device and the charger to an authorized Rexing Service Center Connecting the charger improperly may cause serious damage to the device Any damage caused by misuse is not covered by the warranty 2015 REXING All Rights Reserved Getting Started Installing your V1 Dashboard Camera Inserting the memory card Your device accepts memory cards with a maximum capacity of 32GB Depending on the memory card manufacturer and type some cards may not be compatible with your device Using an incompatible card may damage the device or the memory card or corrupt the data stored on it Use caution to insert the memory card right side up as shown in the image below e Insert memory card with the gold colored contacts facing downwards e Push the memory card into the slot until it locks in place It is r
27. tings Playback Mode You can play back recorded video on your device using the following steps 1 Press REC to stop recording 2 Press MODE twice to switch from Recording to Playback Mode 3 Press and hold the UP or DOWN button to navigate through the stored video files 4 Press OK to start playback for the selected video 5 Press OK again to pause playback 6 Press MODE to stop playback 7 FAST FORWARD While video is playing press the UP button one or more times to set fast playback speed 2X 4X 8X 8 FAST REWIND While video is playing press the DOWN button one or more times to set reverse playback speed 2X 4X 8X 35 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera System Video Settings Deleting Files To delete one particular file 1 Press the UP or DOWN button to navigate through the stored video files 2 Press MENU to view options for the highlighted file Delete Protect Slide Show 3 Press the DOWN button once to select Delete 4 Press OK once to view options for Current MOV file or ALL files Select Current MOV 5 Press OK twice to delete file To delete all files 1 Press on UP or DOWN button to navigate through the video files 2 Press OK to enter Video 3 Press MENU to view options for this file Delete Protect Slide Show 4 Press the DOWN button once to select Delete 5 Press OK once to view delete options for Current MOV file or ALL files Sel
28. to view the current ON OFF status for this feature 4 Press the UP or DOWN button and OK to enable or disable this feature 5 If ON is selected enter the plate number on the next pop up screen using the UP and DOWN buttons press OK to confirm your entry 6 Press MENU to exit Video Settings Parking Monitor This feature allows you to use your device as a surveillance camera with added shake detection functionality This is useful for recording evidence of hit and run events if shaking is detected by the built in g sensor the device automatically enters Record Mode Press MENU once to enter Video Settings Press the UP or DOWN button to navigate to the Parking Monitor option Press OK to view the current ON OFF status for this feature Press the UP or DOWN button to enable or disable this feature Press OK to confirm your entry Press MENU to exit Video Settings 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera System Video Settings Restore Default Factory Settings Performing this operation will reset all of your device s settings to their original values Note any user customized settings will be lost 1 Press MENU twice to enter System Settings 2 Press the UP or DOWN button to navigate to the Default Settings option 3 Press OK to view YES NO confirmation for this operation 4 Press the UP or DOWN button to make your selection 5 Press OK to confirm your entry 6 Press MENU to exit System Set
29. uence option 4 Press OK to view the current ON OFF status for this feature Press the UP or DOWN button to enable or disable this feature 6 Press OK to confirm your entry 7 Press MENU to exit Photo Settings 8 Press OK once to capture a 3 photo sequence on Quality This option allows you to set the quality level of captured images Lower quality images take up less space on the memory card 1 Press MODE once to enter Photo Mode 2 Press MENU once to enter Photo Settings 3 Press the UP or DOWN button to navigate to the Quality option 4 Press OK to view the current selection FINE NORMAL ECONOMY Press the UP or DOWN button to make your selection 6 Press OK to confirm your entry 7 Press MENU to exit Photo Settings 8 Press OK to capture an image on 38 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera Photo Settings Sharpness This feature will automatically enhance captured images for a clearer more distinct picture 1 Press MODE once to enter Photo Mode 2 Press MENU once to enter Photo Settings 3 Press the UP or DOWN button to navigate to the Sharpness option 4 Press OK to view the current selection STRONG NORMAL SOFT Press the UP or DOWN button to make your selection 6 Press OK to confirm your entry 7 Press MENU to exit Photo Settings 8 Press OK to capture an image oa White Balance This setting allows you to adjust the lighting balance for different envi
30. xt photo 1 Press MODE once to enter Photo Mode 2 Press MENU once to enter Photo Settings 3 Press the UP or DOWN button to navigate to the Quick Review option 4 Press OK to view the current selection OFF 2SEC 5SEC Press the UP or DOWN button to make your selection 6 Press OK to confirm your entry 7 Press MENU to exit Photo Settings 8 Press OK to capture an image on Date Stamp This feature will automatically apply a date and or time stamp to captured images 1 Press MODE once to enter Photo Mode 2 Press MENU once to enter Photo Settings 3 Press the UP or DOWN button to navigate to the Date Stamp option 4 Press OK to view the current selection OFF Date Date amp Time Press the UP or DOWN button to make your selection 6 Press OK to confirm your entry 7 Press MENU to exit Photo Settings 8 Press OK to capture an image on 42 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera Photo Settings Playback Mode Photo Follow these steps to view captured images as a continuous slide show Press MODE twice to enter Photo View Mode Press the UP or DOWN button to navigate through the stored image files Press MENU to view options for the selected file Delete Protect Slide Show Press the DOWN button to select Slide Show Press OK to view time options for each slide 2Sec 5Sec 8Sec Press UP or DOWN to make your selection Press OK to confirm your entry and start the s
31. y shortcut for this feature During Recording Mode press and hold OK to turn the LCD screen on or off Auto Power Off When enabled this option allows the device to shut down automatically if Recording Mode is not engaged 1 Press MENU twice to enter System Settings 2 Press the UP or DOWN button to navigate to the Auto Power Off option 3 Press OK to view the current selection 3min Smin 10min OFF 4 Press the UP or DOWN button to make your selection 5 Press OK to confirm your entry 6 Press MENU to exit System Settings 2015 REXING All Rights Reserved Operating your V1 Dashboard Camera System Video Settings Motion Detector Your device can be used as a remote surveillance camera with motion detection capability When this feature is enabled the built in camera can detect movement in the surrounding area using an advanced motion detection algorithm If movement is detected the device will automatically enter Recording Mode 1 Press MENU once to enter Video Settings 2 Press the UP or DOWN button to navigate to the Motion Detection option 3 Press OK to view the current ON OFF status for this feature 4 Press the UP or DOWN button to enable or disable this feature 5 Press OK to confirm your entry 6 Press MENU to exit Video Settings WDR Wide Dynamic Range When enabled this feature automatically adjusts exposure settings to improve recording quality in particularly bright or dim environments providing ba
32. you place the recorder in a safe appropriate location where it will not obstruct the driver s view Connecting the charger to the car s 12V DC outlet Be sure to connect only the Rexing approved charger designed and supplied specifically for use with your device Using an incompatible charger can Cause serious personal injury or damage to your device Inserting a memory card You will need to insert a memory card before you can begin recording The recorder supports MicroSD cards with a capacity of up to 32GB For reliable operation use a Class 10 memory card with a capacity of at least 8GB DO NOT insert or remove a memory card while the device is in operation 19 2015 REXING All Rights Reserved Getting Started Installing your V1 Dashboard Camera Charging the battery Make sure that you fully charge the battery before using your device for the first time Charge the device by connecting the front camera via the USB car charger Use only Rexing approved chargers batteries and cables Using unapproved chargers or cables can damage the device or cause the battery to explode Connect the USB car charger s jack to the USB charging port and then plug the charger into the car cigarette lighter or 12V DC power outlet When device detects no power supply it will automatically power off after 5 seconds To turn on the device again you will need to do so manually by pressing the ON OFF button If the battery is comple
Download Pdf Manuals
Related Search