Max - Enhanced Vision
Contents
1. eevee eT MaxPort Package Contents Controls sme Max ORE POW Gl Max Panel Package Contents Controls LISTING MAS PANG llo LCD PowerPack tadas loas Common QuestiONS ooccccoooccnnnnnocccnnnnncncnnnnnncnnnnnnccnnnnoninonos O ae ck e o len ioia A ect teste metss Warranty Statement onenera Enhanced Vision Products ssceccscacceccececceceeceseess Contact Information ccccccccceccecececcccecucaececucaeescass Important Safety Precautions To obtain the maximum benefits from your Max product please read these safety precautions carefully SYSTEM WARNINGS The Max family of products are designed to improve the quality of life for visually impaired individuals The extent to which Max products can improve the ability to see images depends on an individual s condition and level of visual impairment These products are not designed to restore vision correct eye conditions or halt degenera tive vision loss An eyecare professional can determine the suitabili ty of Max products for a patient s condition SYSTEM PRECAUTIONS Avoid exposing Max pr2. 23 Power Supply Recharging the Battery To recharge remove the battery from the Control Unit Plug the charger into an outlet then install the battery onto the charger The charging light turns on When the battery 15 fully charged the light turns off Remove the battery and install it onto the Control Unit You are ready for another 3 hours of continuous operation You can purchase additional batteries for backup Please refer to page 39 for additional products Using the AC Power Supply Power Outlet The AC Power Supply allows you to plug i MaxPort directly into an outlet when you do not want to use the rechargeable Battery Power Supply Plug the AC Power Supply into the yel low jack on the Control Unit and plug yy the other end into a power source NOTE The battery does not recharge on the Control Unit To recharge refer to Recharging the Battery section above 24 Max Panel Max Panel Package Contents amp Controls Your Max Panel is packaged in a soft case that is convenient for storage and transportation All required accessories for operation are included Max Panel is comprised of 1 LCD Screen LCD Power Pack Rechargeable Battery energy source for 3 to 5 hours On Off Switch for LED Power Pack Max Digital Magnifier Color or Black amp White captures and enlarge the image Viewing Options Button
3. All you need to do is plug in the power supply to the LED Power Pack and the outlet and the battery will automatically start charging If the light is solid then the battery 15 fully charged If the light is blinking then the battery 15 not fully charged The battery will charge while in use as long as the system 15 plugged into an outlet The battery will charge at the same rate whether the LCD Power Pack is ON or OFF You cannot overcharge the battery The battery has no memory so you can charge it at anytime However the more charge cycles the shorter the battery life Approximate charge time 15 4 hours Removing and inserting Battery from LCD Power Pack It is recommended to always keep a battery in the LCD Power Pack The only reason you need to take the battery out is when you are changing batteries To remove the battery push down on the RELEASE button on the front top right of the LCD Power Pack See Figure 1 The battery should release from the LCD Power Pack so you can slide it out To insert the battery gently insert the battery label facing up into the base of the LCD Power Pack Make sure the battery is fully inserted You should hear a click See Figure 2 Figure 1 Figure 2 32 Common Questions Max Q How can use Max with a computer monitor A All Enhanced Vision products can be used with a computer mon itor by attaching an NTSC to VGA adapter Enhanced Vision offers a device called Smart Video ada
4. Brightness Control changes the brightness of the display Rechargeable Battery energy source for 3 hours of continuous reading Control Unit powers the system Viewing Options Button changes the viewing option Magnification Knob changes the level of magnification Max Digital Magnifier Color or Black amp White captures and enlarges the image 10 MaxTrak guides your reading across a page Accessories Included 11 Battery Charger recharges the battery 12 RCA Cable plugs MaxPort into a TV set 13 Power Supply plugs MaxPort into an outlet Now that you ve taken MaxPort out of the case you will find that there is no installation required Please go on to the next section to start using your MaxPort immediately 18 MaxPort Package Contents amp Controls Using MaxPort Figure 3 Turn the Power ON On the control unit press the power button once The button lights up green to show that the power is ON See Figure 1 Note MaxPort conserves power by automatically turning itself off after 120 minutes of inactivity To continue using MaxPort simply turn it on by pressing the power button To turn the power OFF press the button once again However leave the power on for now View the Magnified Image First take any reading material a book or magazine for example and place the Max digital magnifier right on top of it See Figure 2 Then put on the MaxPort glasses and adj
5. of magnification and 3 o clock position is the highest level of mag nification Figure 1 NOTE THE MAGNIFICATION DIAL ONLY TURNS BETWEEN 12 O CLOCK AND 3 O CLOCK DO NOT FORCE THE DIAL BEYOND THE 3 O CLOCK POSITION 12 SELECT A VIEWING OPTION You can choose a viewing option by pushing the black button on the top of the digital magnifier Each push wile change your viewing option If you keep pushing the button you will cycle through all the options See Figure 2 There are different viewing options the Max model you have purchased Figure 2 Viewing Options For Black White Max Soft Contrast Positive Image B amp W This gt is a soft white back ground and a soft Reading 15 easy black foreground for text Useful for with Max viewing illustrations photographs or text High Contrast Positive Image B amp W Reading is easy This is a high contrast white background with Max and a high contrast black foreground for text Useful for reading text Readi High Contrast Negative Image B amp W Is easy This is a high contrast black background with Max and a high contrast white foreground for text Useful for reading text Viewing Options for Color Max The slo Max has all the viewing options of the B amp W model plus Full Color Image Full Color Image This is especially useful for viewing newspaper or magazines with color illustrations or photographs Reading w
6. changes viewing options from color black amp white high contrast positive and high contrast negative depending on Max camera purchased 7 Magnification Dial increases size when turned clockwise Accessories included 8 Power Supply connects to LCD Power Pack and power cord 9 Power Cord connects to power supply and wall outlet 10 6 foot RCA Video Cable connects LCD Power Pack to a TV 11 Lens Cloth used to clean the Max camera and LCD screen 12 Soft Carrying Case 13 MaxTrak keeps your Max rolling in a straight line across a page 14 Max Writing Stand used for limited writing signing a check or completing a form Max Panel Package Contents amp Controls 27 Using Max Panel 1 Turning the power ON On the right side of the LCD Power Pack flip the switch from to See Figure 1 The LCD screen and Max camera will automatically turn on in a few seconds An image of what the camera is on top of should appear on the LCD screen Turn the power off by flipping the same switch back to the O position However leave the power on for this training section Figure 1 Note If the battery is charged there is no need to plug in the power supply and cord If the battery is not charged then refer to Recharging the Battery section on page 32 2 Adjusting the LCD screen It is important to orient the LCD screen to provide the best viewing angle To lift the screen put one hand on the bac
7. slowly glide straight across a page from left to right When you have reached the end of a line glide back from right to left to the beginning of the line Then lift Maxtrak and slightly move it down to continue reading When you need more flexibility in movement remove MaxTrak from the magnifier Using Max Writing Stand Accessory not included Viewing Options Button Place the Max on top of the Max Writing Stand so that the camera cable is facing away from you If you have inserted it cor rectly the Max should fit perfectly in the Max Writing Stand Move the Max on top of your desired object that you would like to sign or write on With your non writing hand tilt the Max Writing Stand to the LEFT if you are RIGHT handed and to the RIGHT if you are LEFT handed For the best focus turn Max to the highest level of magnification by rotating the dial from 12 o clock to o clock See Adjusting the Magnification on page 12 Magnification Dial It is best to use Color or Black amp White viewing modes when using the writing stand 15 MaxPort MaxPort Package Contents Controls Your MaxPort is packaged in a sturdy case that is convenient for storage and transport All required accessories for operation are included MaxPort is Comprised Of 1 MaxPort Glasses displays crisp images without refection or glare Adjustable Nose Piece supports the glasses on your nose Power Button turns MaxPort ON and OFF
8. Merlin LCD amp Merlin Plus Merlin LCD is a video magnifier that pivots and swivels to the most comfortable viewing position This product includes all the same features as the Merlin but with a sleek ergonomic design Merlin Plus offers the same advanced features as the Merlin but is compatible with most computer workstations and offers a split screen mode This mode lets the user view magnified images and computer files concurrently Amigo Amigo is a truly portable desktop magnifier Optimal viewing is achieved with a tilting 6 5 inch viewing screen Amigo provides 3 5 to 14x digital magnification and the lightest weight in its class Amigo is battery operat ed and can be taken anywhere 38 Enhanced Vision Products Flipper The Ultimate in Flexibility Read write get more out of life Our innovative camera design lets you magnify in almost any position with images in full color Magnification Range 1X 24X Available in with Color and Back amp White Modes Options include Flipper Stand ACCESSORIES Smart Video Connects Enhanced Vision low vision devices to a computer monitor or laptop computer MaxTrak An essential accessory to keep your Max rolling in a straight line across a page Batteries Rechargeable batteries for Enhanced Vision portable products including Jordy FlipperPort MaxPort FlipperPanel and Max Panel Portable Panels Only Non Panel CONTACT INFORMATION
9. TV This jack could be located on either the front or back of your TV Remove the Power Supply from the package Plug one end of the Power Supply into the Control Box Jack labeled POWER Be sure the plug is fully inserted into the Control Box Then plug in the other end of the Power Supply into an outlet Turn the power on The ON and OFF switch is on the side of the control box Turn the TV ON You can switch between using Max and your TV with the TV remote control by changing between Video and TV mode If you have a TV with a built in VCR you can switch between using Max and your TV by pushing the Input button on your remote Now you can go to the Using Max section on page 12 for informa tion on how to use Max 10 Max Installation FIGURE 1 VIDEO IN on Back or Front of TV Power Supply Plugs to Outlet Control Box Now that you have successfully installed your Max you can enjoy 15 ease of use and can be used to magnify material on any curved or Wea t surface Simply place the Max on the item that you need to be and slowly slide the unit across or up and down as desired Adjusting The Magnification Your Max has been preset at its lowest level of magnification To increase the magnification level simply turn the large black dial on top of the Max clockwise a quarter of a turn 1 4 from 12 o clock to 3 o clock See Figure 1 The 12 o clock position is the lowest level
10. The Family enhanced _ WESTON Max Panel Users Manual About Enhanced Vision Products Congratulations on your purchase of one of the Max family of prod ucts Enhanced Vision products are designed to give you the highest quality and convenience available Max products use the latest advances in video and display technology to provide you with a portable system that addresses the need for magnification of text pictures and much more Max products consist of an auto focus camera which captures and projects images on to either a TV pair of Enhanced Vision LCD glasses a LCD flat screen a computer monitor or laptop computer additional hardware may be required Images can be switched between true color black amp white high contrast positive or nega tive The camera has been designed so either a right or left handed user would be able to use it very effectively with a minimum amount of practice and or training Prior to using this system please carefully read and follow the instructions provided within this booklet A thorough understanding of the functionality will allow you to fully benefit from the flexibility and great features of this device If you have any questions please contact the eyecare professional or the supplier from whom you have acquired the unit Table of Contents Max Package Contents amp Controls Max Instala ias Matta A
11. Toll Free 800 440 9476 www enhancedvision com Voice 714 374 1829 Fax 714 374 1821 39 Max Family of products are designed to enlarge and enhance images to offer improvement in the quality of life for people with visual impairment The extent to which Max products can improve the ability to see images depends on a person s individual condition and level of visual impairment Max products are not designed to restore vision correct eye conditions or halt degenerative vision loss An eyecare professional can determine the suitability of Max products for a patient s individual condition Max products are designed to be worn while sitting or standing still and are not to be used while walking driving or mobility of any kind enhanced vision www enhancedvision com 800 440 9476 714 465 3400 MXX 0036 00 Feb 2007 2005 All rights reserved Product specifications subject to change without prior notice
12. anties accompanying this product This warranty does not cover the following Defects or damage from misuse use in other than normal and customary manner accident or neglect Defects or damage from improper operation maintenance installation adjustment alterations or modification Defects or damage from spills of food or liquid All plastic surfaces and all other externally exposed parts that are scratched or damaged due to normal use Damage due to operation of Max products with equipment not supplied by Enhanced Vision Service Process In the event that technical support or repair service is needed please contact your local Enhanced Vision representative or the Enhanced Vision warranty service center If warranty service 15 required please contact Enhanced Vision at 714 374 1829 or 800 440 9476 through Friday between 8 a m and 5 p m Pacific Standard Time PST to request a return authorization number Warranty repairs will not be accepted without a valid return authorization number You may wish to keep the original product packaging in case warranty service is required The manufacturer cannot provide packaging for warranty repairs 37 Enhanced Vision Products he Merlin LCD ralue and picture q JORDY The Ultimate Low Vision System For distance intermediate and near viewing Magnification Range 1X 24X Available in Color Options Desktop stand Computer Enabled soft case
13. cable listed on page 26 Plug one end of the RCA cable into the yellow jack on the back of the LCD Power Pack labeled Video Out and the other end into the yellow Video Input jack on the front or back of your TV Then switch your TV to Video Mode This will allow you to view magnified images on your TV screen See Figure 2 Note The LCD Power Pack video output standard is the same as the Max camera used NTSC or PAL version Yellow VIDEO IN on front or back of TV Figure 2 RCA Video Cable 30 Using LCD Power Pack Using the LCD Power Pack with an Outlet You should always leave a battery in the LCD Power Pack Once you are sure the battery is in the LCD power pack then connect the power supply and power cord together See items on page 26 and Figure 1 Connect the power cord to the outlet and the other end of the power supply to the back of the LCD power pack where it says 18 3AMPS See Figure 2 8 3 A green LED light will appear the front top right corner of the power pack If the light is solid then the battery 15 fully charged the light is blinking then refer to Recharging the Battery on page 32 You can not overcharge the battery Note The battery will drain if you leave the power switch ON when you are not using the LCD Power Pack Figure 1 2 Figure 3 18 VDC 3AMPS 31 Using LCD Power Pack Recharging the Battery The battery recharges in the LCD Power Pack
14. e illumina tion for the camera Over time these lights may burn out If this has occurred you will need to send your Max to our service center for repair 33 Common Questions Q Can purchase replacement parts for my Max A Parts such as the RCA video cable can be purchased at a local elec tronics retailer or from Enhanced Vision However any internal parts or power supply would have to be replaced or purchased from our service center Internal parts are not available as separate accessories Q Can use Max on LCD or flat screen monitor A Yes Max can be used with any TV However Max can also be used with other monitors as long as they have RCA Video In jack available MaxPort Q adjusted the brightness in my MaxPort glasses but the image on the TV is not affected Is there something wrong with the MaxPort A No The brightness controls on the MaxPort control box only affect the image being viewed inside the MaxPort glasses Any brightness adjustment needed when using the MaxPort with a TV needs to be made with the TV s brightness control function Q How long does my battery included with my Maxport last per charge A A 550 series battery is included with your MaxPort system The 550 series battery will last approximately 2 1 2 hours per charge If purchased the 750 series battery will last approximately 4 1 2 hours Q How long does it take to completely recharge my battery A If you own a 550 series ba
15. ember will contact you with a repair estimate After the repair is complete your product will immediately be shipped back to you Q How much will it cost for repairs A For non warranty repairs charges will vary depending on what needs to be completed Anytime there is cost involved with a repair our service department will notify you of the charge and get your permission before proceeding Enhanced Vision will not perform cost related repairs unless first authorized by the system s owner or caregiver Prepayment of any repair cost is required before repair work can be completed Q Does Enhance Vision have local service centers A Currently all service is done at Enhanced Vision s corporate ser vice department This insures that repairs are not only processed efficiently but that they also meet Enhanced Vision s strict quality guidelines 36 Warranty Statement Warranty Information Warranty Form enclosed Enhanced Vision products are designed to give you the highest qual convenient features ease of use and reliability Max products have been inspected and tested prior to shipping Enhanced Vision warrants the Max MaxPort and Max Panel against manufacturer defects in material and workmanship under normal use for one year from the date of purchase Enhanced Vision at its option will at no charge either repair or replace the defective product during the warranty period There are no other expressed or implied warr
16. ing the dial on the side of the Control Unit To increase brightness roll the dial away from you To decrease brightness roll the dial toward you Connecting MaxPort to a TV Set To use MaxPort with your TV set plug one end of the RCA cable into the low jack on the Control Unit and the other end into the yellow VIDEO INPUT jack of your TV This jack could be located either on the front or back of your TV Then switch your TV to Video Mode This will automatically allow you to view magnified images on your TV screen 22 Power Supply REMOVING AND INSTALLING THE BATTERY Removing the Battery from the Control Unit The battery sits directly on top of the Control Unit To remove push the small tab at the end of the Control Unit and slide the battery away from the Power Button Installing the Battery on the Control Unit To install the battery place its grooved edge against the raised end of the Control Unit Gently press down on the battery and slide it into place The grooved end of the battery must slightly touch the raised end of the Control Unit for you to slide the battery in Installing the Battery on the Charger The charger also has a raised end and flat end To install place the grooved end of the battery against the raised end of the charger Then slide the battery into place Removing the Battery from the Charger To remove slide the battery away from the raised end of the charger
17. ith Max If you are using Max for reading purposes place the Max on the text so the first line is located approximately in the middle of your TV screen Slide the Max across left to right over the first line Once completed slide the Max back to the beginning of the line and then slide it down to the next line Practice the motion of moving Max on a straight line by keeping the palm of your hand on the table and holding Max in your hand Repeat this exercise several times with different printed material varied in col umn width and length As you learn to move Max in a straight line and as you gain more control over the unit it will become easier to use We highly recommend purchasing the MaxTrak if you are reading for extended periods of time MaxTrak is designed to attach to your Max and help guide you in a straight line Please read the section below Using MaxTrak Using MaxTrak Accessory not included When you need the extra support to guide your reading across a page you can attach MaxTrak to the Max MaxTrak allows you to follow a straight line easier Start by placing MaxTrak on your table with the wheels touching the table sur face The small end of MaxTrak should be OR T Td closest to you If this is done correctly way down into you can roll MaxTrak easily from left to right and back again Then place the on top of MaxTrak and slip it into place For better image quality To use MaxTrak
18. k of the base and the other hand one the LCD and pull forward see Figure 2 3 Once in the upright position use both hands to adjust vertically see Figure 4 Figure 2 Figure 3 Figure 4 28 Using Max Panel Using Max Digital Magnifier Viewing Options Button The Max Digital Magnifier automatically focuses when it is placed directly over a desired object and projects a magnified image onto the LCD screen By rotating the magnification dial to increase the size and pushing the viewing options button to change viewing modes you will be able to find what settings work best for you See Figure 7 Note The magnification dial only turns from 12 o clock to 3 o clock Do not force the dial beyond these two points 2 vision Magnification Dial For more information on how to use the Figure 7 Max Digital Magnifier please refer back to page 12 Using Max 29 Using LCD Power Pack Connecting Max or Flipper to the LCD Power Pack If you have purchased the Max camera separate from the LCD Power Pack you will need to connect them together To do so simply plug the end of the cable connector which looks like a telephone connector coming from the Max camera into the open jack labeled Camera on the back of the LCD Power Pack Ws See Figure 1 Figure 1 Connecting LCD Power Pack to a TV Set with Video In To connect the LCD Power Pack to a TV set with Video In you will need the 6 foot RCA video
19. oducts to extreme or rapid changes temperature or humidity as these conditions may cause fogging or damage to products Max products should never be placed near a radiator or heat register Do not smoke while using Max products Cigarette cigar and pipe smoke release abrasive particles which are potentially damaging to the Max optics Do not use this product near water e near a bathtub kitchen sink swimming pool etc Do not place this product on an unstable cart stand or table as the product may fall causing serious damage Important Safety Precautions Always place the excess cord in an area where will not be damaged by a person walking on it To avoid the risk of electrical shock do not disassemble this product Return it to the place of purchase if service or repair work is required Any attempt to disassemble your Max product will void the warranty Always use the power supply provided within your package Do not attempt to use any other power supply doing so will void the warranty CARING FOR MAX PRODUCTS Always turn the power OFF when you are not using the system Make sure the power is OFF or unplug your Max product from the wall outlet before cleaning Do not use liquid cleaners The plastic surfaces of your Max product may be dusted with a dry cloth The optical surfaces should be cleaned as needed for best per formance Dampen a lens cleaning tissue with a small amount of lens cleaning s
20. olution and gently wipe the optical surfaces clean Never apply lens cleaning solution directly on any surface of your Max products TM ATT vision Max Package Contents amp Controls Your Max includes all required accessories for operation with any TV Max Digital Magnifier Color or Black amp White captures and enlarges the image Control Box connects the camera to the TV set and turns Max ON OFF Viewing Mode Button for switching between color black amp white high contrast positive or high contrast negative screen images Magnification Dial increases size when turned clockwise 6 Foot RCA Video Cable connects Max control box to the TV via the Video Input jack 6 Power Supply connects Max control box to an outlet Additional Accessories not included 7 MaxTrak keeps your Max rolling in a straight line across a page 8 Max Writing Stand used for limited writing signing a check or completing a form Max Package Contents amp Controls Additional Accessories not included nn Max Installation Basic TV Connection Using the RCA Video Cable and Video Input Jack Refer to Figure 1 Remove Max and the Control Box from the package Remove the RCA Video Cable from the package Plug one end of the RCA Video Cable into the Control Box Jack abeled VIDEO Plug the other end of the RCA Video Cable into the yellow VIDEO INPUT jack of your
21. pter for this purpose Smart Video 15 also available in a laptop version Q My TV does not have the necessary Yellow Video In jack How can connect my Max to my TV A product known as a Video RF Modulator 15 available at neighborhood electronic stores which connects to your TV s anten na terminal to the Max s control box Examples include Steren Video RF Modulator P N 203 101 or Terk RF Modulator Video Converter Q have my product connected properly but I m still not seeing an image What am doing wrong A First double check to be certain that all cables are connected securely Next check to see that the TV is on the proper channel If your system is being connected through the antenna terminal make certain that your TV is on channel 3 some TVs utilize channel 4 please check your TV manufacturers user manual for further details If your system is connected to the TV s video in jack check to see that your TV is on the proper video mode usually located on your remote control or your TV s menu options Some remote controls access this channel by pressing a TV Video Input Auxiliary AUX External EXT Game or Source Please note this channel differs depending on the TV maker Please consult your TV manufacturer s user manual for additional information When I activate my Max the lights on the bottom no longer come on How can fix this A The Max has small LED lights built into it that provid
22. thout the battery Q Does the battery have to be completely discharged before recharge it A No The Max Panel has a lithium ion battery that does not need to be completely discharged before recharging it again The battery can not be over charged However the fewer charging cycles the longer the battery life Q Can connect the Max Panel to a TV or monitor A Yes The Max Panel includes an RCA cable that will allow it to con nect to a TV The Max Panel can also be connected to a PC monitor through use of an adapter not included To connect the Max Panel to the TV set plug one end of the RCA cable into the yellow jack on the back of the power pack labeled Video Out and plug the other end into the yellow Video Input jack on the front or the back or front of your TV Then switch your TV to Video Mode 35 Common Questions General Q In case of a problem how can get my system serviced A For questions or to arrange for product service please contact Enhanced Vision s customer service team Monday through Friday from 8am 5pm PST at 714 374 1829 or 800 440 9476 or sup port enhancedvision com We will contact you within 24 hours to provide instructions and a return authorization number Q How long does the repair process take A Once our service department receives your product the repair process typically takes about 72 hours or less If the repair is not covered under warranty our service team m
23. ttery it should be left to charge for a minimum of 3 hours The 750 series battery should be charged for a minimum of 5 1 2 hours Q If use the provided A C power supply with the battery still in the Maxport control box will it harm the battery Can the battery be charged while in the control box A No The A C power supply will override the battery if it is in the control box Leaving the battery in place will not harm it You can only charge the battery in battery charger provided Max Panel Q How long does the Max Panel battery last A The battery will last approximately 3 5 hours per complete charge 34 Common Questions Q How long does it take for the Max Panel battery to recharge A The battery needs approximately 4 hours to recharge Q How does the Max Panel battery recharge A There is no separate battery charger included with the Max Panel Keep the battery inserted into the LCD Power Pack Connect the Desktop power supply to the Max Panel and plug it into an outlet sock et or surge protection strip The battery will recharge while in the Max Panel The battery will also continue to charge if the panel is in use Q Can use the Max Panel without the battery A Yes The Max Panel comes with an Desktop power supply that can be connected to an outlet or power strip Doing this will run the Max Panel and also recharge the battery at the same time Note The Desktop power supply will also power the system wi
24. ust the glasses up or down on your face until you are comfortable with the image See Figure 3 20 Using MaxPort 3 Using MaxPort with Your rescription Glasses If you wear glasses to view distance you will need to keep them on when using MaxPort To use MaxPort with your glasses gently pull out the nose piece on the MaxPort glasses See Figure 4 Then put the MaxPort glasses over the glasses you normally wear to view distance Figure 4 If you pull the nose piece too far out it may come off But don t worry you can put it back on without any damage to the system 4 Using Max Digital Magnifier Viewing Options Button The Max Digital Magnifier automat cally focuses when it is placed directly over a desired object and projects a magnified image onto the MaxPort galsses By rotating the magnification dial to increase the size and pushing the viewing options button to change viewing modes you will be able to find what settings work best for you See Figure 5 Note The magnification dial only turns Mashification Dial from 12 o clock to 3 o clock Do not Figure 5 force the dial beyond these two points For more information on how to use the Max Digital Magnifier please refer back to page 12 Using Max 21 Using MaxPort VIDEO IN on front or back of TV RCA Cable Controlling the Brightness You can change the brightness of the dis play to meet your reading requirement by slowly roll
Download Pdf Manuals
Related Search