DS321LR4_User Manual..
Contents
1. DVI Cable DS321LR4 User Manual 13 Connector Positions DVI IN USB RS485 OUT RS485 IN RS232 IN AC IN VGA IN Power Switch DS321LR4 Unit mm 101 5 14 DS321LR4 User Manual Input Output Terminals RS232 RS485 RS485 m VGA IN Connect the VGA output of a PC or an AV device by using a VGA cable 2 DVI IN Connect the DVI D output of a PC or the HDMI output of an AV device by using a DVI HDMI cable 9 USB USBcan play content photo music movie 2 RS485 OUT RJ45 control function for the daisy chain application 5 RS485 IN RJ45 network input connection for the use of remote control from computer 6 RS232 IN RS232C network input connection for the use of remote control from computer 7 AC IN Connect the supplied power cord to the wall outlet Power Switch Press to switch the main power on off DS321LR4 User Manual 15 Operating Instructions Powering On Off the Display To turn on off the display press the power switch on the back of the display as shown in the diagram below NOTE the remote control only works when the main switch is in the ON position Using the Remote Control When using the remote control aim the remote at the IR receiver on the display The receiver on the DS321LR4 model is at the back of the display with a receiving angle of 100 d2. Professional LCDs User Manual LIS LM Fes DynaScan Version 1 01 The use of diagrams and illustrations in the manual for reference only actual product may be different Product design and specifications are subject to change without notice Contents Safety 3 Important Safety InformaltlOn uuu 4 Declaration Of COnfOFmlly 6 gto uuu uuu 7 MUS INS RE ULM 7 Installing and Replacing Remote Control Batteries 8 A 9 NI eie 9 Connecting To a Power 50 66 13 Connecting an External Video 50 668 13 Connector 14 Input aces 15 Operating Tr 16 Powering On Off the Display 16 Using the Remote Control pe pe aa e de ge rr Md r
3. Important Safety Information Disassembling the LCD is strictly prohibited Opening the cover may expose the user to shock or other hazards Please contact DynaScan certified service professionals for all maintenance requirements Do notallow any liquid to enter the LCD Also avoid placing the LCD close to water sources Do not place heavy objects on the power cord A damaged power cord might cause electric shock or fire Do not bend curl or damage the power cord The power cord must comply with local safety regulations Do not damage or modify the prongs pins and the ground contact on the power plug Dono place the LCD on an unleveled surface or an unstable vehicle The LCD could fall over and cause substantial damage Do not cover the vents and or the heat sink Do not install the LCD beside radiators or other heat sources The installation site should have sufficient ventilation so the heat generated by the LCD can be dissipated Do not use the Signage in a hot humid dusty or fumy environment Handle the LCD with care Save the packaging materials for the next transport Please clean the backside of the LCD at least once a month for dust and other particles Unplug the LCD immediately and contact a DynaScan certified service professional as soon as possible when any of the following situations occurs Damaged power cord or power plug If liquid or foreign objects has entered the LCD If
4. battery leak in the battery compartment Do not touch the leaked substance from the batteries in case of a battery leak Doing so may damage human skin Note if you plan on not using the remote control for a long period of time we recommend removing the batteries from the remote control DS321LR4 User Manual 8 Installation The LCD must be properly installed using a wall mount Incorrect installation may cause injury or damage the equipment Product warranty does not cover damages caused by improper installation and DynaScan shall not be held responsible in such incident Mounting Hanging the Professional LCD from the ceiling or mounting it on the wall is the responsibility of the user Not all ceilings or walls provide enough strength to support the LCD The LCD may drop and cause serious injury if it is hanging from the ceiling with insufficient support or is mounted on a slanted wall Product warranty does not cover improper installation modification or damages caused by natural disasters DynaScan recommends hiring certified professionals to evaluate the installation site and mounting operation Do not to cover the vent and or the heat sink in order to ensure proper heat dissipation Refer to the installation guide provided by manufacturer of the mount for proper installation When mounting on a wall or hanging from a ceiling A wall mount is not included in the accessory Please purchase a VESA Standard wall mount t
5. disassemble the screen to avoid electric shock The product can normally operate only under 2000m in altitude n installations at altitudes above 2000m some abnormalities may be experienced After extended use the heat sink behind the screen may be hot Do not touch to avoid being burned Do not touch the screen panel with sharp objects or extreme pressure to avoid damage to the panel The display should be installed in well ventilated place do not install in a confined space Do not drop or allow any object to fall to the screen Do not touch the screen with wet hands to avoid electric shock When cleaning unplug the monitor Use a soft dry cloth to wipe the screen off Do not use alcohol or other chemical liquids If you smell smoke or hear a strange noise immediately unplug the monitor and contact the vendor Do not discard this product with general household waste Please be sure to comply with the local waste regulations Suitable for mounting on concrete or other non combustible surface only e When a stationary or fixed image is displayed for a long time on the screen the image may be permanently imprinted on the screen This phenomenon is known as image burn in and is not covered by the manufacturer s warranty In order to avoid burn in avoid prolonged display of static or fixed images on the screen DS321LR4 User Manual 3
6. the LCD has been exposed to rain or water If the LCD has been dropped or the casing has become damaged If you notice any structural damage such as cracks or unnatural vibration If the LCD cannot be operated following the steps outlined in this manual If the LCD emits smoke or other odors or generates strange noises Operating Suggestions Avoid displaying a stationary image for a long period of time in order to prevent image sticking DS321LR4 User Manual 4 Cleaning the Panel Use a soft lint free cloth to gently wipe dust off the screen panel Do not use any hard material to wipe the panel Do not poke the panel with your hand or any sharp object such as a pen or a nail or exert excessive pressure to the panel to prevent damage to the panel Do not use any cleaning solution on the panel as it might cause discoloration Cleaning the Casing Unplug the power cord e Gently wipe the casing with a soft cloth Attention Donotuse any of the following solutions to clean the casing as they may damage the paint and cause it to crack or peel benzene solution alkaline solution alcohol based cleaning solution glass cleaner wax polisher or detergent DS321LR4 User Manual 5 Declaration of Conformity FCC Verification This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 th
7. 6 mm Monitor Weight set package 15 2 kg 18 2 kg VESA Mounting Dimension 4 Holes 200x200 mm USER INTERFACE OSD Language English French Spanish ENVIRONMENT Operation Temperature 0 C 40 C Storage Temperature 20 C 60 C Humidity 10 80 RH Non Condensing DVI D IN 1 Support HDMI HDCP VGA IN 1 Ports RS232 IN 1 RS485 IN 1 OUT 1 USB IN 1 Design and specifications are subject to change without notice DS321LR4 User Manual 22 Input Mode 60 Hz 25 175 MHz 50 Hz 27 MHz 59 94 Hz 27 MHz 60 Hz 40 MHz 60 Hz 65 MHz 50 Hz 60 Hz 74 25 MHz 60 Hz 79 5 MHz 60 Hz 85 5 MHz 50 Hz 60 Hz 148 5 MHz DS321LR4 User Manual 23 Pin Assignments Digital RGB Output DVI D DVI PIN ASSIGNMENT OF DVI CONNECTOR O OO O OO albe qepe lipe wp e etree RX2 Shield RX2 RX4 1 Shield RX5 20 21 DDC Serial Clock 22 Shield EN EN DS321LR4 User Manual 24 RS 232 Output NC 6 0000 6000 RS 232 Input connected to 7 amp 8 connected to 6 connected to 4 connected to 1 amp 8 connected to 1 amp 7 DS321LR4 User Manual 25 Troubleshooting No image is displayed Check whether
8. Y PRODUCT UNDER THIS WARRANTY OR MAKE A PRODUCT EXCHANGE WITHOUT RISK TO OR LOSS OF PROGRAMS OR DATA DS321LR4 User Manual 30 www dynascanusa com Copyright DynaScan Technology Inc All Rights Reserved
9. ditions for Equipment under Test DS321LR4 User Manual 6 Getting Started Contents Confirm the accessories below are included with the display lf any item is missing please contact your dealer The color and shape of the accessories may vary by product e DS321LR4 Professional LCD e Remote Control x1 pcs e Batteries 1 5V AAA x2 pcs e Quick Start Guide x1 pcs eCD ROM x1 pcs e Power cable x1 pcs e RS 232 cable x1 pcs e DVI cable x1 pcs e Ethernet crossover cable x1 pcs Attention Please use the following table to check whether the included power cord is suitable for your region If the power cord does not match your region please contact your local supplier Please use matching AC socket in order to meet local safety regulations Plug Type North America European Continental Plug Shape EU Region U S A Canada Taiwan Voltage 110V DS321LR4 User Manual 7 Installing and Replacing Remote Control Batteries 1 Open the battery compartment cover 2 Insert 2 new AAA batteries 3 Close the battery compartment cover Warning Incorrect usage of batteries may cause leakage or explosion e Pay attention to the polarity when installing batteries Do not use batteries from different brands together Do not mix new and used batteries Doing so may shorten the battery life or cause leakage e Remove the batteries or replace them with a new pair when the batteries are depleted in order to prevent
10. ects of earthquake unexpected vibration and other external forces when evaluating the ceiling strength The LCD should be secured to the building s structural frame such as a beam and not to materials such as light steel frame or interior decoration Do not use wood screws or dry wall anchors for installation Maintenance Inspect the fasteners regularly for signs of loosening or deformation Please perform appropriate corrective measures when a problem is identified Neglecting the problem may worsen the situation Increase the inspection frequency on areas where previous maintenance had occurred to ensure the problems do not occur again DS321LR4 User Manual 12 Connecting To a Power Source Using the power cable provided insert the female connector into the back of the display shown the in the diagram below Connect the male end of the power cable to a 100 240 volt 50 60Hz AC power outlet A Insert the plug completely into the socket A loose power connection may cause damage to the display and or pose a fire hazard Connecting an External Video Source Turn OFF the power to both the LCD and the external video device Using the DVI cable provided insert one end into the DVI IN on the back of the display shown the in the diagram below Connect the other end of the DVI cable to the DVI output of the video source Refer to your video device s product manual for additional information
11. edu dne qe BRE e ek Rcs 16 Using the Rear Panel Controls 19 Navigating the On Screen Display OSD Menu 20 Nerei 22 jejeje DP E 23 Pin SOTME m A 24 Digital RGB Output DVI D DVI 2 daak naat 24 Digital RGB Input 24 DS321LR4 User Manual 1 RS 232 OUP Ut EcL 25 5 232 RETE 25 FOUDIGSMOOTING 26 Recycling and Energy 0 27 Material Contents Declaration 28 CW IAIN tlm 29 DS321LR4 User Manual 2 Safety Precautions Do not install display in a wet environment or place anything on the top of the display filled with liquid such as vase or beverage Do not install near flammable objects such as gasoline or other volatile liquids Do not install near any heat sources such as radiators or other heating devices Do not install in the dusty environment Do not damage the power cord or plug Do not
12. egrees The IR receiver configurations of the model are shown in the figure below The operating range of the remote control is 2 5 meters 8 feet Ambient light may affect the performance of the remote control Avoid fluorescent or neon lights in the vicinity DS321LR4 User Manual 16 y oooooooolb r 6oloooooood bodooooooooooo Colo o Qc oooo0000000c 0070577770 100 17 DS321LR4 User Manual Using the Remote Control cont oo Color and shape may vary by model POWER Power On Off e MENU ENTER OSD On Off and Select the highlighted item e UP Move the cursor up or change the setting of the selected item LEFT Move the cursor left or change the setting of the selected item e RIGHT Move the cursor right or change the setting of the selected item 0 DOWN Move the cursor down or change the setting of the selected item 9 INPUT EXIT Input signal switching key and exit the current selection DS321LR4 User Manual 18 Using the Rear Panel Controls gt B Power Q Ener Down O Up O _ POWER Power On Off MENU ENTER OSD On Off and Select the highlighted item DOWN Move the cursor down or change the setting of the selected item UP Move the cursor up or change the setting of the selected item Move the cursor
13. is device must accept any interference received including interference that may cause undesired operation FCC Information This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Declaration of the Manufacturer We hereby certify that the Professional LCD DS321LR4 is in compliance with Low Voltage Directive 2006 95 EC Electromagnetic Compatibility Directive 2004 108 EC 60950 1 2005 2 Edition Am1 2009 EN 60950 1 2006 A1 1 2009 Am1 2010 A12 2011 EN 55022 2010 AC 2011 Class A ITE EN 61000 3 2 2006 A1 2009 A2 2009 EN 61000 3 3 2008 EN 55024 2010 EN 61000 4 2 2009 EN 61000 4 3 2006 A1 2008 A2 2010 EN 61000 4 4 2012 EN 61000 4 5 2006 EN 61000 4 6 2009 EN 61000 4 8 2010 DynaScan Technology Inc EN 61000 4 11 2004 VCCI report ready VCCI Class A ITE V 3 2013 04 Technical Requirements V 4 2012 04 Supplementary Test Con
14. left or change the setting of the selected item Move the cursor right or change the setting of the selected item SOURCE EXIT Input signal switching key and exit the current selection DS321LR4 User Manual 19 Navigating the On Screen Display OSD Menu Press the MENU button on either the real panel control or remote control to display the OSD Use the navigation arrows to select and adjust menu items Picture Mode Set the picture mode The options are Standard Dynamic Soft Personal Set the color mode Color Mode The options are Cool Normal Warm Set the advanced Advanced The options are H Pos V Pos Clock Phase Auto Set the zoom mode Zoom Mode The options are Normal Zoom Cinema Wide Point to Point Picture LetterBOX Panorama AUTO Set the 3DNR 3DNR The options are Off Weak Middle Strong Adjusts the brightness level Backlight Range 0 100 DLC Turn on off DLC function Set the color range Color Range The options are AUTO 0 255 16 235 Light Sensor Turn on off light sensor function Sleep Timer Set the sleep time Set the time zone Time Zone The options are Atlantic Eastern Central Mountain Pacific Alaska DST Turn on off daylight saving time function Time Set the time format Time Format The options are 12 hour 24 hour Set the clock Clock Note The internal clock will not continue to function when the p
15. o secure the LCD DynaScan is not responsible for damages caused by using non standard wall mounts Verify that the mounting location can support the weight of the LCD before installation The installation angle must be within 15 degrees of the vertical axis Do not install the wall mount while the power is turned on as it may cause serious injury from electrical shock Model Number VESA mm Screw specification Screw Length Number Greater than 10mm DS321LR4 A 200 200 M6 not including wall 4 mount thickness DS321LR4 User Manual 9 DS321LR4 200 0 Unit mm 4 6 9 10 DS321LR4 User Manual Orientation When used in the portrait orientation the LCD should be rotated clockwise such that the left edge becomes the top edge Installation Location The ceiling or the wall must have enough strength to support the LCD and its accessories Do not install in a location with strong vibrations or is dusty Do not install near the building s main electric panel Do not install at a location where the LCD can be easily removed by the general public When installed in an alcove leave at least 10cm 4 of space around the LCD to ensure proper ventilation 10cm 4 in DS321LR4 User Manual 11 When hanging from a ceiling Ensure that the ceiling is strong enough to support the LCD and it accessories Also consider the eff
16. ower is turned off Wake Up Set turn on time Set the language used in the OSD menu Setup Menu Language The options are English French Spanish Transparent Set the transparent used in the OSD menu The options are 0 25 50 75 100 DS321LR4 User Manual 20 Restore Default Restores all settings to default Setup Wizard Most setting items can be guided by the setup wizard Software Update USB New version firmware update Play video and audio files which stored in USB storage device The options are PHOTO MUSIC MOVIE APP DMP Some functions may not be available for all input Adjusted value Each R G B value for this product has been individually adjusted in during production to a preset color mode of cool 5500K DS321LR4 User Manual 21 Specifications LCD Panel Size 31 5 inches Native Resolution 1920 x 1080 Brightness 2500 cd m Typ Contrast Ratio 10 000 1 Static PANEL 1 000 000 1 Dynamic Response Time 6 5 ms Typ Viewing Angle 178 178 Life Time 50 000 hrs Typ Panel Surface AG 3H Power Supply Internal Rated Voltage 100 240V 50 60Hz POWER Power On Mode Typ 115W Max 190W Standby Mode lt 5W AC Out None MECHANICAL SPECS Bezel Width T B L R 28 6 21 4 15 15 mm Cabinet Color Black Monitor Dimension LxHxD w o Stand 732 x 447 x 9
17. reducing our products impact on the environment is of the utmost importance We are dedicated to meet the latest environmental protection regulations Energy usage Disposal Do not dispose of electrical appliances as unsorted municipal waste use separate collection facilities Contact your local government for information regarding the collection systems available If electrical appliances are disposed of in landfills or dumps hazardous substances can leak into the groundwater and get into the food chain damaging your health and well being When replacing old appliances with new one the retailer is legally obligated to take back your old appliances for disposal at least for free of charge DS321LR4 User Manual 27 Material Contents Declaration Hazardous Substances Hexavalent Polybrominated Polybromodiphenyl Part Name Lead Mercury Cadmium Chromium Biphenyls Ethers mom c om cs o 0 o o O indicates that the level of the specified chemical substance is less than the threshold level specified in the standards of SJ T 11363 2006 and EU 2005 618 EC X indicates that the level of the specified chemical substance exceeds the threshold level specified in the standards of SJ T 11363 2006 and EU 2005 618 EC DS321LR4 User Manual 28 Limited Warranty WARRANTY COVERAGE DynaScan s warranty obligations are limited to the terms set forth below DynaScan warrants its p
18. roduct against defects in materials and workmanship for a period of TWO 2 YEARS from the date of initial installation If a defect exists DynaScan will repair the product at no charge replacement part assumes the remaining warranty of the original product or NINETY 90 DAYS from the date of replacement or repair whichever provides longer coverage for you When a part is exchanged any replacement item becomes your property and the replaced item becomes DynaScan s property OBTAINING WARRANTY SERVICE You must contact DynaScan identify the unit by model number serial number and date of purchase and furnish a brief description of the problem EXCLUSIONS AND LIMITATIONS This Limited Warranty applies only to products manufactured by DynaScan that can be identified by the DynaScan trademark trade name or logo affixed to them The Limited Warranty does not apply to any non DynaScan products or any software even if packaged or sold with DynaScan hardware Non DynaScan manufacturers suppliers or publishers may provide their own warranties DynaScan and its Authorized Service Providers are not liable for any damage to or loss of data or other information stored on any media or any non DynaScan product or part not covered by this warranty This warranty does not apply a to damage caused by natural disasters accident abuse misuse misapplication neglect b to damage caused by service including upgrades and expansions performed by an
19. the DVI in cable is completely plugged in Check whether the main switch is in the ON position and the power cord is completely plugged in Check whether the image source s resolution is set to 1920 x 1080 1080p Check whether the DVI cable is damaged or bent excessively Nothing happens when switching the main switch on Unplug the power cord from the socket and plug it back in after a few seconds to reset the Signage Note Unplugging the power cord will change the settings Image is unstable Check whether the DVI in cable is completely plugged in The remote control does not work Check whether there are batteries in the remote control Check the batteries for freshness polarity etc Check whether the remote is in the operation range Bright light may interfere with the remote control Please avoid using the remote control near special fluorescent lights or neon lights Auto on does not work or does not function properly Check whether the Wake Up time settings are set correctly Cannot control the display remotely via RS 232 Check whether the RS 232 cable is connected properly If you are still having trouble with your DynaScan DS Professional LCD contact your dealer or DynaScan directly for more assistance DS321LR4 User Manual 26 Recycling and Energy Information DynaScan is firmly committed to its environmental protection efforts and we believe that
20. yone who is not an DynaScan Authorized Service Provider c to a product or a part that has been modified without the written permission of DynaScan or d if any DynaScan serial number has been removed or defaced THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES REMEDIES AND CONDITIONS WHETHER ORAL OR WRITTEN EXPRESS OR IMPLIED DYNASCAN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IF DYNASCAN CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY ALL SUCH WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY No DynaScan reseller agent or employee is authorized to make any modification extension or addition to this warranty DYNASCAN IS NOT RESPONSIBLE FOR DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION OR UNDER ANY OTHER LEGAL THEORY INCLUDING BUT NOT LIMITED TO LOST PROFITS DOWNTIME GOODWILL DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY ANY COSTS OF RECOVERING OR REPRODUCING ANY DS321LR4 User Manual 29 PROGRAM OR DATA STORED IN OR USED WITH DYNASCAN PRODUCTS AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT DYNASCAN SPECIFICALLY DOES NOT REPRESENT THAT IT WILL BE ABLE TO REPAIR AN
Download Pdf Manuals
Related Search