Fluke 411D Manual
Contents
1. Labels Laser Radiation Do not stare into the beam Laser class 2 acc IEC 60825 1 2007 Maximum radiant power Emitted wavelength Beam divergence 0 16 x 0 6 mrad Pulse duration 1x10 s gt 1 4s aN Care gt Clean the device with a damp soft cloth gt Do not immerge the device in water gt Do not use aggressive cleaning agents or solvents 7 7 Disposal A Caution Damage to property due to inappropriate disposal gt Dispose of the device and the batteries according to the national country specific disposal directives gt Protect the device and the batteries from access of unauthorized persons Z Note Do not dispose of this product as unsorted municipal waste Go to Fluke S website for recycling information2. Switching on off gt Switch on the device by pressing key 4 briefly The device shows the battery symbol until another key is pressed gt Switch off the device by holding key 7 for several seconds If no key is pressed for 180 seconds the device switches off automatically Delete key Undo the most recent action by pressing key 7 briefly Adjusting the measuring plane See drawing F Rear measuring plane is the standard setting gt For measurement trom front edge press key 6 briefly gt For measurement from rear edge press key 6 briefly again Adjusting the measuring units Metric system is the standard setting gt To change the unit hold key 6 for several seconds With every keypress the device switches to the next unit Possible units gt meters with mm display 3 feet inch fractional gt summary row up to 1 16 inch gt 2nd row up to 1 8 inch 3 inch fractional gt summary row up to 1 16 inch gt 2nd row up to 1 8 inch Measuring Measuring individual distances gt Press key 4 briefly gt Aim active laser at target area gt Press key 4 briefly The device measures the distance The device displays the result immediately Continuous measuring This function enables distances to be staked out gt Hold key 4 for several seconds Continuous measuring starts gt Press key 4 briefly Continuous measuring stops The value last measured appears in the summary row
3. 411D Laser Distance Meter Users Manual July 2008 O 2008 Fluke Corporation All rights reserved Specifications subject to change without notice All product names are trademarks of their respective companies LIMITED WARRANTY AND LIMITATION OF LIABILITY Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service The warranty period is two years and begins on the date of shipment Parts product repairs and services are warranted for 90 days This warranty extends only to the original buyer or end user customer of a Fluke authorized reseller and does not apply to fuses disposable batteries or to any product which in Fluke s opinion has been misused altered neglected contaminated or damaged by accident or abnormal conditions of operation or han dling Fluke warrants that software will operate substantially in accordance with its functional specifications for 90 days and that it has been properly recorded on non defective media Fluke does not warrant that software will be error free or operate without interruption Fluke authorized resellers shall extend this warranty on new and unused products to end user customers only but have no authority to extend a greater or different warranty on behalf of Fluke Warranty support is available only if product is purchased through a Fluke authorized sales outlet or Buyer has paid the applicable international price Fluke reserves the right
4. 5 7 Functions Add Subtract Add gt Measure the first distance gt Press key 9 once The device adds the second measuring result to the first measuring result gt Measure the second distance Subtract gt Measure the first distance gt Press key 5 once The device subtracts the second measurement result from the first measurement result gt Measure the second distance Repeat if required The device displays the result in the summary row and the previous value in the second row Area gt Press key 8 once The area symbol appears on the display gt Press key 4 and measure the first distance e g length gt Press key 4 and measure the second distance e g width The device displays the result in the summary row and the respective measured distance to the next measurement in the second row Space volume gt Press key 8 twice The volume symbol appears on the display gt Press key 4 and measure the first distance e g length gt Press key 4 and measure the second distance e g width gt Press key 4 and measure the third distance e g height The device displays the result in the summary row and the respective measured distance to the next measurement in the second row Pythagoras See drawing G gt Press key 8 three times The Pythagoras symbol appears on the display gt Press key 4 and measure the first distance diagonal measurement gt Press key 4 a
5. ED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PUR POSE FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL INDIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES INCLUDING LOSS OF DATA ARISING FROM ANY CAUSE OR THEORY Since some countries or states do not allow limitation of the term of an implied warranty or exclusion or limitation of incidental or consequential damages the limitations and exclusions of this warranty may not apply to every buyer If any provision of this Warranty is held invalid or unenforceable by a court or other decision maker of competent jurisdiction such holding will not affect the validity or enforceability of any other provision Fluke Corporation Fluke Europe B V P O Box 9090 P O Box 1186 Everett WA 98206 9090 5602 BD Eindhoven U S A The Netherlands 11 99 To register your product online visit http register fluke com X 4 25 m 13 9 ft Symbols Warning notices The warning notices differ from one another concerning the type of danger through the following signs gt Caution warns against damage to property gt Warning warns against bodily harm gt Danger warns against danger to life Composition of the warning notices A Signal words Type and source of the danger gt Measure to avoid the danger Other symbols Notes Note Notes on appropriate handling of laser measuring devices Operation instruct
6. a space volume Pythagoras 12 battery symbol 13 2nd row 14 fractions exponents 15 units 16 summary row 17 Addition Subtraction Initial operation Insert the batteries See drawing E gt To ensure a reliable use use exclusively alkaline batteries gt Remove battery compartment cover gt Insert alkaline batteries 2 x AAA observing the polarity gt Close the battery compartment cover Changing the batteries gt Change the batteries when the battery symbol is blinking permanently How to use Measuring conditions The quality of the measurement depends on the surfaces to which you are measuring Measurement errors A Caution Damage to property due to use of wrong measuring results gt Avoid measuring errors due to unexpected events during distance measuring gt Perform a control measurement Measuring errors are possible in case of gt colorless fluids e g water gt clean translucent glass 3 styrofoam or similar semi translucent surfaces gt strongly reflecting targets that deflect the laserbeam gt measurements aimed at moving objects Causes 3 Strongly reflecting targets deflect the laser beam and cause measuring errors gt Non reflecting dark surfaces increase the measuring time For constantly high quality measurements gt Perform control measurements periodically gt Perform control measurements before and after important measurements 4 7
7. ions Composition of the operating instructions gt Guidance to an operation Indication of an outcome if necessary Schedules Composition of the non numbered schedules 3 Schedule level 1 3 Schedule level 2 Composition of the numbered schedules 1 Schedule level 1 2 Schedule level 1 2 1 Schedule level 2 2 2 Schedule level 2 Safety and dangers Make sure that the device is not used without instructions Make sure that the device is used exclusively according to the instructions Make sure that the safety settings are not disabled Make sure that indication labels and caution labels are not removed Do not open the device with tools screwdriver etc Make sure that the device is not converted or modified o 08 O O O O Q 3 7 Avoid using accessories of other producers that are not recommended by Fluke Make sure that the device is not used carelessly gt when working on scaffolds gt when climbing ladders gt when measuring near running machines gt when measuring on open machine parts or installations Avoid aiming directly at the sun Avoid blinding other persons intentionally also in darkness Make sure that the measuring position is secured sufficiently e g in streets on construction sites etc gt Make sure that the device is in proper and flawless condition gt Do not use a defective device Correct usage 3 measuring of distances 3 calculation of functi
8. nd measure the second distance horizontal measurement The device displays the result in the summary row and the respective measured distance to the next measurement in the second row Troubleshooting gt If the message Error does not disappear after switching on the device repeatedly please contact the retailer If the message InFo appears with a number observe the instructions in the following table ho came Roma 204 Calculation error Perform measurement again 252 Temperature too high Let the device cool down 53 Temperature too low IWarm the device up 55 Reception signal too Change target surface weak measuring time e g white paper too long 56 Input signal too high Change target surface e g white paper 57 Measuring error too Shadow the target much background light area 58 Measurement outside Mind the range of the measuring range 60 Laser beam interrupted Repeat the measurement Technical data Range 0 1 m to 30 m 0 33 ftto 100 ft Measuring accuracy 2 0 Typ 3 0 mm 0 12 in 1 mm 1 16 in Smallest unit displayed Laser class Laser type 635 nm lt 1 mW Automatic switch off after 180 s Continuous measuring yes Addition Subtraction yes Area yes Volume yes Pythagoras yes Unit switching yes Dimension H x D x W 118 x 50 x 26 mm 4 65 x 1 97 x 1 02 in Battery durability up to 3000 2 x AAA measurements Weight 100 g 3 22 ounce Tempe
9. ons e g areas and volumes gt Use the device exclusively in an atmosphere that is permanently inhabitable by humans Foreseeable misuse gt Do not use the device as a laser pointer gt Do not use the device in explosive or aggressive environments Areas of responsibility Area of responsibility of the manufacturer of the original equipment Fluke Corporation P O Box 9090 Everett WA Fluke gt Fluke is responsible for the safety related flawless delivery of the device including the operating instruction vo Area of responsibility of other manufacturers of accessories gt Other manufacturers of accessories for Fluke 411D are responsible for the development the realization and the communication of safety concepts for their products and their effects in combination with the Fluke product Area of responsibility of the operator A Caution Damage to property due to repairing gt In case of malfunctions contact the retailer The operator is obliged to observe the following gt He understands the protection information on the device and the operating instruction 3 He is familiar with the customary in house accident control directives Overview Keys See drawing A 1 laser emitter 2 receiver lens 3 display 4 on measure 5 Subtraction 6 measuring plane unit 7 clear off 8 area space volume Pythagoras 9 Addition Display See drawing D 10 measuring plane 11 are
10. rature range Storage Operation 25 C to 70 C 13 F to 158 F 0 C to 40 C 32 F to 104 F under favorable conditions good target surface room temperature up to 10 m 33ft Under unfavorable conditions such as bright sunlight a very weakly reflecting target surface or large temperature fluctuations the deviation can rise by 0 25 mm m 0 01 in for distances over 10 m 33 ft Electromagnetic compatibility EMC A Warning Possible disturbance of other devices e g safety equipment medical equipment due to electromagnetic radiation gt Observe the safety instructions of the respective devices Despite the compliance with all requirements of the corresponding directives and norms a disturbance of other devices is possible 6 7 Laser classification The Fluke 411D generates a visible laser beam that is emitted from the front of the device The device complies with laser class 2 according to gt EC60825 1 2007 Safety of laser products gt EN60825 1 2007 Safety of laser products Laser class 2 products Do not look into the laser beam and do not unnecessarily aim at other persons The eye is usually protected by preventive reactions such as the eyelid closure reflex A Warning Bodily harm due to laser beam Do not look directly into the laser beam gt Do not look directly into the laser beam with optical appliances such as binoculars telescopes
11. to invoice Buyer for importation costs of repair replacement parts when product purchased in one country is submitted for repair in another country Fluke s warranty obligation is limited at Fluke s option to refund of the purchase price free of charge repair or replacement of a defective product which is returned to a Fluke authorized service center within the warranty period To obtain warranty service contact your nearest Fluke authorized service center to obtain return authorization information then send the product to that service center with a description of the difficulty postage and insurance prepaid FOB Destination Fluke assumes no risk for damage in transit Following warranty repair the product will be returned to Buyer transportation prepaid FOB Destination If Fluke determines that failure was caused by neglect misuse contamina tion alteration accident or abnormal condition of operation or handling including overvoltage failures caused by use outside the product s specified rating or normal wear and tear of me chanical components Fluke will provide an estimate of repair costs and obtain authorization before commencing the work Following repair the product will be returned to the Buyer trans portation prepaid and the Buyer will be billed for the repair and return transportation charges FOB Shipping Point THIS WARRANTY IS BUYER S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLI
Download Pdf Manuals
Related Search