UMM-6 manual.indd
Contents
1. USB MEASUREMENT MICROPHONE DAYTONAUDIO Quick Reference Guide 315 8 mm e 8 5 8 V218 mm 1 25 4 mm daytonaudio com 705 Pleasant Valley Dr DAYTONAUDIO tel 937 743 8248 Springboro OH 45066 info daytonaudio com USA Model UMM 6 e Precision condenser microphone for measurement and recording applications e Connects directly to your PC or Mac via USB port e True omnidirectional pattern with calibrated flat frequency response e Rugged construction with high quality components e Compact design includes sturdy carrying case with foam insert e Compatible with industry standard measurement software e USB powered no external power required e Integrated design eliminates need for additional signal conditioning hardware Technical Specifications e Capsule type Precision 6 mm electret condenser e Polar response True omnidirectional e Frequency response 18 Hz 20 kHz Calibrated e Sensitivity at 1 KHz 30 dB IPGA 19 dBFS Pa Sensitivity is adjustable using Windows volume control e Max SPL for 1 THD 1000Hz 135 dB e Noise level SNR A weighted 30 dB IPGA 70 dBFS e Connector USB B connector e Power supply 5V USB power only e Weight 150 grams Microphone unit only Setup To set up the UMM 6 for use simply plug it into an available USB port on your PC or Mac using the supplied USB cable The UMM 6 is also compatible with USB extenders Within Windows in the Sound control panel ma2. es either expressed or implied that extend the foregoing and there are no warranties of merchantability or fitness for any particular purpose Dayton Audio is not responsible for any consequential or inconsequential damage to any other unit or component or the cost for installation or extraction of any component of the audio system or for the improper use of products This includes but is not limited to burnt voice coils overheating bent frames holes in the cone or broken lead wires This warranty gives you specific legal rights and you may also have other rights that vary from state to state Non Warranty Service If non warranty service is required the product may be sent to the Company for repair replacement transportation prepaid by calling 937 743 8248 for details complete instructions and service fee charges Dayton Audio Last Revised 3 6 2015
3. ke sure the item UMM 6 is selected as the recording device On the Mac OS in System Preferences gt Sound make sure the UMM 6 is selected as the Input device Calibration To deliver the most accurate results a calibration file must be loaded into the software program being used for audio analysis This calibration file is generated based on the serial number of your UMM 6 To obtain your calibra tion file in text format compatible with most audio analysis software visit DaytonAudio com and navigate to the UMM 6 product page Enter the serial number of your UMM 6 then click on Download Write your serial number in the blank provided below in case the printed number becomes scratched or worn on the microphone body Record your serial number here Support If you encounter problems or have unanswered questions please visit the Support page on the Dayton Audio web site for support contact information Warranty Information Dayton Audio products are warranted free from defects in material and workmanship for 5 years from date of purchase 1 year warranty applies to the following products powered subwoofers and electronic devices e g subwoofer amplifiers and plate amplifiers as well as the Omnimic V2 and DATS loudspeaker testing devices In the rare case of a product failure please contact your place of purchase or call our Customer Support Department at 937 743 8248 Warranty Limitations There are no other warranti
Download Pdf Manuals
Related Search