Ashbury 4 in 1 Crib (8201) - Assembly and Operation Manual
Contents
1. lt gt Million Dollar Baby Ashbury 4 in 1 Crib 8201 Assembly and Operation Manual Congratulations on purchasing a MDB Family product This crib will provide many years of service if you adhere to the following guidelines for assembly maintenance and operation This crib is for resi dential use only Any institutional use is strictly prohibited Please be sure to follow the instructions for proper assembly Use a Phillips head screwdriver for assembling the crib in addition to the Allen wrench included in the hardware box Do not use power screwdrivers All of our cribs are made from natural woods Please understand that natural woods have color variations which are the result of nature and not defects in workmanship DO NOT SUBSTITUTE PARTS ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARD WARE YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLIS TIC VARIATIONS bed N IDN D Ashbury 4 in 1 crib can later be converted into a toddler bed or a full size bed To convert to a toddler bed turn to page10 To convert to a full size bed turn to page 11 revised O7JUN2011 page 1 B Front Panel Front Front C Right Side Panel D Left Side Panel Leftleg Rear Rear Leftleg Right leg lt J Foot 4 7 K Back Top Bar 5 lt L Front Top Bar 4 st Left Sid2. REPLACEMENT OR MISSING PARTS PLEASE VISIT US AT WWW THEMDBFAMILY COM OR YOU CAN CONTACT US BY MAIL MDB FAMILY 855 WASHINGTON BLVD MONTEBELLO CA 90640 revised21APR2011 2 5 Million Dollar Baby Ashbury 4 in 1 Crib 8201 Toddler Bed Conversion Assembly Instructions All of the parts and hardware you will need are supplied with the crib at the time of purchase Unscrew the Allen head bolts and lock washers Move the spring frame to the and remove the front panel assembly lowest level Insert wood dowels H8 to the ends of guardrail S Attach the guardrail S to front posts using two Allen S Guardrail head bolts H2 and lock washers H18 The guardrail S can be installed with the high end facing either to H8 H8 the left or the right Attach two caps Z to the top of front posts using wood dowels H8 cam bolts H10 and cam locks H11 removed at step 1 The caps Z must be installed in the illustrated direction Z Cap Outside Check to make sure that all of the bolts are fastened securely DO NOT OVERTIGHTEN The mattress intended for use on the bed shall be a full size mattress having minimum dimensions of 51 5 8 1310 mm in length 27 1 4 690 mm in width and 4 100 mm in thickness and not exceeding 6 152 mm The intended user s minimum age must be at least 15 months old and maximum weight must not exceed 50 Ibs 22 7 kg Failure to follow these warnings the
3. assembly instructions could result serious injury or death from entrapment or strangulation DO NOT place bed near windows where cords from blinds or drapes may strangle a child DO NOT place items with a string cord or ribbon around a child s neck such as hood strings or pacifier cords DO NOT suspend strings over a toddler bed for any reason If guard rails are used as the mattress containment means guard rails provided must be used to avoid the formation of a gap between the mattress and the bed that could cause an entrapment page 10 lt gt Million Dollar Baby For all 4 in 1 cribs please contact a retailer to order your full size adult wooden bed rails for your full size bed convers Congratulations on purchasing a MDB Family product This product will provide many years of service if you adhere to the following guidelines for assembly maintenance and operation This product is for residential use only Any institutional use is strictly prohibited Please be sure to follow the instructions for proper assembly Use a Phillips head screwdriver for assembling the product in addition to the Allen wrench included in the hardware box Do not use power screwdrivers All of our products are made from natural woods Please understand that natural woods have color variations which are the result of nature and not defects in workmanship DO NOT SUBSTITUTE PARTS ALL MODELS HAVE TH
4. E SAME QUANTITY OF PARTS AND HARDWARE YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS HARDWARE Tools Needed not included gt 3 4 Flat head screw 10 Phillips 3 4 Allen screwdriver head bolt 4 E Left bracket F Right bracket Remove the crib sides spring frame and post brackets Use the Allen head bolts D to attach the Left E and Right F brackets to the foot board posts Right post and bracket are shown Attach the rails to the brackets with the screws Attach the rails to the headboard with the C and tighten securely with a Phillips head barrel nuts and bolts you removed in step 1 Screwdriver page 11
5. T 27 1 4 INCHES BY 51 5 8 INCHES 69 CM BY 131 CM WITH A THICKNESS NOT EXCEEDING 6 INCHES 15 CM Please refer to the label sample below on the inside face WE WILL ASK YOU FOR YOUR SERIAL NUMBER FOR ALL of the headboard Record the model item number and serial WARRANTY AND REPLACEMENT PART REQUESTS PLEASE number of your crib the name of the store where you made REFER TO THE LAST PAGE OF THIS INSTRUCTION SHEET FOR the purchase the date of purchase and the wood finish in WARRANTY INFORMATION KEEP THIS MANUAL FOR FUTURE the box to the lower right REFERENCE CAUTION ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27 1 4 INCHES Model Number BY 51 5 8 INCHES WITH A THICKNESS NOT EXCEEDING 6 INCHES Serial Number Store Where MOBGEL ITEM APPLICABLE REGULATIONS OF THE gt h d NUMBER CONSUMER PRODUCTS SAFETY COMMISSION urcnased Date of Purchase Wood Finish SAMPLE LABEL Please read the Caution and Warning Statements insert before using your crib page 8 WARNING Failure to follow these warnings and the assembly instructions could result in serious injury or death READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB KEEP THE MANUAL FOR FUTURE USE A WARNING Parents should ensure a safe environment for the child by checking regularly before placing the child in the product that every component is properly and securely in place Do not use this crib if you cannot exactly follow the accom
6. dhand or demo models This warranty does not cover any damaged or defective parts that result from installation and assembly normal wear and tear abuse negli gence improper use or alteration to the finish design and hardware of the crib The specific legal rights of this warranty may vary from State to state Some states do not allow any exclusion or limitation of incidental damages some states do not allow limitation on how long an implied warranty lasts Storage Pine woods exchange moisture with the air adjust ing to major changes in room temperature and humidity Therefore it is best to place your furniture away from heating or air conditioning vents e Sunlight is not friendly to solid wood furniture and prolonged direct exposure to harsh sunlight can discolor the finish Be careful not to place your furni ture in direct sunlight for extended periods of time As with all your fine furniture blot up spills immediately Care and Cleaning Do not scratch or chip the finish Do not use abra sive chemicals for cleaning Clean with mild soap on a soft rag Rinse and dry thoroughly If you ever refinish this furniture be sure to use only a non toxic finish specified for children s products If you choose to refinish this furniture the warranty will be voided Registering your product is even easier than before You can register your product on our website at www themdbfamily com IF YOU WOULD LIKE TO ORDER
7. e Top Bar N Right Side Top Bar R Spring Frame Tools Needed not included gt P Glide Support Rail 2 y Phillips S Guardrail screwdriver page 2 i Panel o o o _ 2 W Drawer Front Panel U Mid Drawer Board 2 X Drawer Back Panel Y Drawer Right Drawer HARDWARE H1 3 Round Head Bolt 4 H2 2 1 4 Allen Head Bolt 16 seat melas H4 Washer 4 H5 1 3 4 n H6 1 1 4 Wood H7 1 2 Small w H8 Wood Screw 4 Screw 6 Screw for Glides Dowel 22 emm DJ H12 Plastic H18 Lock H9 Small Wood Dowel 8 H10 Cam Bolt 7 H11 Cam Lock 7 Plug 4 Washer 24 000 O 0 575 55 13 Right Panel Glide H14 Right Drawer Glide 029 0 000 20a H H17 Allen Wrench H15 Left Panel Glide H16 Left Drawer Glide SUSMA Attach panel glides H13 H15 to glide support rails P Glide Support Rail P Glide Support Rail H15 Left Panel Glide H13 Right Panel Glide page 3 SS Set posts E Front F Front G Rear H Rear Left Leg Right Leg Left Leg Right Leg SSK Attach Side Top Bar posts and glide support rails to sides panels G Rear Rear Left Leg Right Leg E Front M Left Side Top Bar Left A e H18 N Right Side Top Bar F Front H9 P Glide Support Rail H9 P Glide Support Rail H9 D Left Side Panel C R
8. ight Side Panel DO NOT OVERTIGHTEN page 4 Sma Set up back panel and back top bar K Back Top Bar DO NOT OVERTIGHTEN Left Side Panel SIS Attach the spring frame Swing out four hangers at corner of the spring frame R carefully Attach spring frame FLAT SIDE UP Choose the height of the spring frame Start at the highest level and adjust accordingly Bolt the spring frame R to legs using Allen head bolts H3 washers H4 lock washers H18 and Allen wrench H17 As the child grows it is important to lower the spring Make sure the spring frame is level 712 er 2 22 SH lt gt L N As the child grows it is important to lower DO NOT TIGHTEN BEFORE the spring frame Sy INSTALLING THE FRONT PANEL page 5 SUMA Set up front panel and front top bar ININ D Left Drawer V Right Drawer Panel Panel O H16 Left H14 Right Drawer Glide Drawer Glide page 6 JA Set up drawer panels SS Attach drawer front panel Inset Rotate clockwise to secure page JIMLA Slide drawer under the crib Recheck all screws and bolts to be sure they are fastened securely Do not overtighten __ Before using your crib please read all caution ary statements on the insert sheet eee PLACE FOR FUTURE REFERENCE CAUTION ANY MATTRESS USED IN THIS CRIB SHALL BE AT LEAS
9. panying instructions Infants can suffocate on soft bedding Never add a pillow or comforter Never place additional padding under an infant reduce the risk of SIDS pediatricians recommend healthy infants be placed on their backs to sleep unless otherwise advised by your physician Strings can cause strangulation Do not place items with a string around a child s neck such as hood strings or pacifier cords Do not place cords straps or similar items that could become wound around the child s neck in or near this crib Do not suspend strings over a crib or attach strings to toys help prevent strangulation tighten all fasteners A child can trap parts of the body or clothing on loose fasteners NOT place a crib near a window where cords from blinds or drapes may strangle a child Do not place this crib near a window or a patio door where a child could reach the cord of a blind or curtain and be strangled When a child is able to pull to a standing position set the mattress to the lowest position and remove bumper pads large toys and other objects that could serve as steps for climbing out e Do not use this crib if the child is able to climb out unaided or is taller than 35 89cm e Check this product for damaged hardware loose joints loose bolts or other fasteners missing parts or sharp edges before and after assembly and frequently during use Securely tighten loose bolts and other fa
10. steners DO NOT use crib if any parts are missing damaged or broken DO NOT substitute parts Contact MDB FAMILY for replacement parts and instructional literature if needed NOT use a water mattress with this crib For cribs equipped with teething rails replace teething rail if damaged cracked or loose e f refinishing use a non toxic finish specified for children s products e Never use plastic shipping bags or other plastic films as mattress covers because they can cause suffocation Infants can suffocate in gaps between crib sides when used with a mattress that is too small Follow warnings on all products in a crib Ensure that the sides are properly latched or locked in place when the crib is occupied mattress used with this should not be more than 15cm thick and should be of such length with width that the gap between the mattress and the sides of the crib is no more than 3cm when the mattress is pushed into the corner of the crib AAWARNING Please do NOT remove any wood screws in the normal disassembly of the crib ONE YEAR LIMITED WARRANTY We will replace any missing parts at the time of purchase or any defective item within a one year period from the date of original purchase Please keep your receipt so that we may process your warranty request This warranty only covers new units with original packaging and ownership and is not transferable It does not cover any used secon
Download Pdf Manuals
Related Search