User Manual
Contents
1. into the ExpressCard slot 7 Open Device Manager under System Properties and check if there is the device you install under Prolific USB to Serial Comm Port 8 Now the Serial 1 Port ExpressCard is ready to use For Windows Vista 1 Don t insert the Serial 1 Port ExpressCard into the ExpressCard slot Please insert the CD driver bound with Serial 1 Port ExpressCard into your CD ROM Drive At the Windows desktop click Start then Run Type D DS 31204 Vista Setup exe then click OK Change D to match your CD ROM drive letter Follow the on screen instructions to complete the installation Insert the Serial 1 Port ExpressCard into the ExpressCard slot Open Device Manager under System Properties and check if there is the device you install under Prolific USB to Serial Comm Port Now the Serial 1 Port ExpressCard is ready to use Changing COM Port Number Some serial devices need a special COM port in order to work If your serial device works properly do not change this setting 1 From the Device Manager window double click Ports COM amp LPT then double click the Prolific USB to Serial Comm Port you want to change Click Port Settings tab and click Advanced button Click the down arrow that is next to the COM Port Number box select a COM port that is not in use then click OK Click OK then close Device Manager to save the changes2. RS 232 SERIAL EXPRESSCARD User Manual Features and Benefits Fully compliant with ExpressCard Specification 1 0 ExpressCard 34 Form Factor Module Provides one DB9 RS232 port Supports serial transmission rate up to 230400bps No IRQ resource required Bus Powered no separate power supply or battery required Easy Plug and Play Installation Works with various types of RS232 serial devices including modems PDAs label printers bar code scanners digital cameras and more Supports Windows 7 Vista XP System Requirements Windows 7 Vista XP ExpressCard enabled system with an available ExpressCard slot Hardware Installation General instructions for installing the card are provided below Since the design of system may vary refer to your system s reference manual for further information if needed Insert the Serial 1 Port ExpressCard into the ExpressCard slot of your system Make sure it is inserted all the way in for a solid connection Driver Installation For Windows 7 Vista XP 1 Don t insert the Serial 1 Port ExpressCard into the ExpressCard slot 2 Please insert the CD driver bound with Serial 1 Port ExpressCard into your CD ROM Drive At the Windows desktop click Start then Run 4 Type D DS 31204 2K_XP_2003 Setup exe then click OK Change D to match your CD ROM drive letter 5 Follow the on screen instructions to complete the installation 6 Insert the Serial 1 Port ExpressCard
Download Pdf Manuals
Related Search