File
Contents
1. MANUAL VERSION 2 Aquabotix Technology Corporation All rights reserved July 2015 Trademarks used in this guide Aquabotix and AquaLens are trademarks of Aquabotix Technology Corporation Other names mentioned in this guide may be trademarks or registered trademarks of their respective owners TABLE OF CONTENTS 12 13 17 LEGAL DISCLAIMER CHAPTER 1 SYSTEM Overview Package Includes CHAPTER 2 ASSEMBLY Charging Pole Attachment Unit Assembly CHAPTER 3 MAINTENANCE CHAPTER 4 TOPSIDE VIEWING STATION Optional CHAPTER 5 WARRANTY LEGAL DISCLAIMER Trademarks used in this guide Aquabotix and AquaLens Pro are trademarks of Aquabotix Technology Corporation Other names mentioned in this guide may be trademarks or registered trademarks of their respective owners The purpose of this manual is to provide AquaLens users with a clear understanding of operating procedures If further information is needed contact Aquabotix at Support aquabotix com or 508 676 1000 website www aquabotix com Aquabotix reserves the right to make changes to the specifications of the AquaLens PRO at any time without notice Also Aquabotix may alter any or all documentation without notice LEGAL DISCLAIMER Important Safety Instructions Assemble and use AquaLens PRO only as instructed by this manual Read and follow these important safety instructions and the detailed assembly in this manual prior to using the AquaLens2. UNIT ASSEMBLY STEP 2 Insert the two ends together and twist the blue ring onto to threaded side until tight UNIT ASSEMBLY SIEP 3 After the cables have been connected you can power the unit by flipping the toggle switch on the topside box This toggle switch has 3 options Off On or On with LED lighting You are now ready to use your unit 11 MAINTENANCE Cleaning Dome Using an acrylic glass cleaner spray onto surface of dome and rub in witha microfiber cloth After Water Care 1 Rinse AquaLens PRO with fresh water 2 Wipe down using a microfiber lens cleaning cloth 3 Safely store AquaLens PRO cover dome to protect from scratches 12 TOPSIDE VIEWING STATION Optional PACKAGE INCLUDES Viewing Sphere with 25 ft of cable attached Topside Viewing Station with 7 LCD screen Power Control Box Remote Control Connector Cable Battery Power with recharge plug Waterproof Carrying Case STEP 1 Charging Your AquaLens PRO has been charged before shipment however you should charge the unit fully before use Plug the black wall plug into your outlet It takes approximately 12 hours to fully charge the battery The unit should be charged while powered off STEP 2 Connection Connect the cable from the topside viewing station to your AquaLens Pro cable See image at left The notch in the connector must align with the groove in the other connector After inserting the connector
3. edge must be removed When closing this lid all wires must remain clear of container s sealing edge Please ensure the battery is on the left side of the box when the hinge is at the top Please note The sealing edge of the topside box has been treated with lubricant to keep the seal water tight Be sure this lubricant remains clean to ensure a water tight seal A silica moisture absorbing pack has been included in the topside box This pack needs to be kept in the topside box at all times It should be kept to the right of the battery and should not sit on any of the wires CHAPTER 1 SYSTEM General System Operating Voltage 9 6 to 12 vdc Total System Weight 10 pounds Owners Manual Online Digital Warranty 1_year limited defects in materials or workmanship l Viewing Sphere Depth Rating 300 ft 91 4 mi Size 5 in diameter Weight 3 pounds Lighting High Intensity LED Camera Format NTSC Resolution 640 X 480 pixels Topside box Housing Waterproof to 10 feet shock resistant floats Connector Buccaneer Connector IP68 Monitor 3 5 inch LCD screen Tether Material Kevlar Reinforced Premium Video Cable Breaking Strength 300 pounds Protection Flexible Polyurethane Outer Jacket Connector Waterproof P68 Plug and Socket with Extensions Available Available Options Extension Cable Available in 50 ft increments Viewing Station 7 LOD Viewing Screen with DVR Capability PACKAGE INCLUDE
4. PRO Follow all safety and operational warnings and heed all additional restrictions on use Refer all non routine service issues to Aquabotix at www aquabotix com or support aquabotix com Safety and Operational Warnings Assemble AquaLens PRO in a safe dry place Do not assemble while submerged in water or allow Aqualens PRO to get wet before it is fully assembled and enclosed in the watertight dome Do not assemble with wet hands AquaLens PRO is powered by lithium ion batteries Do not use any other type of battery or powering device for AquaLens PRO Caution should be used when charging batteries Do not attempt to charge batteries in AquaLens PRO while submerged in water Do not let the battery assembly area get wet Do not assemble with wet hands The AquaLens PRO dome must be completely secured to keep it watertight Check the security of the dome before submersion The topside box and LCD screen are waterproof to 10ft depth Do not submerge the topside box deeper than 1 Oft AquaLens PRO is meant for depths no greater than 300ft from the water surface Do not go beyond this depth due to limitation as operational safety is not tested and rated for such depths Secure all cables on board to prevent tripping hazards Inspect AquaLens PRO prior to use If there is any sign of water inside the camera or housing unit or other damage do not use Send AquaLens PRO to Aquabotix for service Do not attempt to dislodge or
5. S PACKAGE INCLUDES e Viewing sphere with 25 ft of cable attached Waterproof topside box with cable connector ACME threaded angular adapter for pole mounting Battery charger Your AquaLens PRO has been charged before shipment however you should charge the unit fully before use CHARGING CHARGING STEP 1 Unclip the topside box to access the battery pack CHARGING STEP 2 Disconnect the cable connectors inside the topside box CHARGING STEP 3 Connect the clip from the battery charger to the male end of the clip from inside the topside box Plug the charger into a wall outlet until fully charged CHARGING STEP 4 When the AquaLens PRO is powered on lights will illuminate at the top of the topside box All lights including green indicates good operating power Two lights including yellow indicates low operating power Only red indicates immediate need for recharge POLE ATTACHMENT POLE ATTACHMENT STEP 1 Locate the threaded hole in the back of the viewing sphere POLE ATTACHMENT STEP 2 screw in the ACME angular adapter into the hole clockwise until tight Now you will be ready to screw in the desired pole for use 10 UNIT ASSEMBLY UNIT ASSEMBLY STEP 1 Locate the cable connectors on the cable coming from the viewing sphere and the topside box Please note there is a small notch in the female connector that needs to be lined up with the bump in the male connector
6. ation customization repair disassembly of the product abuse exposure to contamination excessive electric or magnetic force will void this warranty lf Aquabotix receives during the applicable warranty period notice of defect in any product which is covered by Aquabotix s warranty Aquabotix shall either replace or repair the product at Aquabotix s discretion If Aquabotix is unable to repair or replace as applicable a defective product which is covered by Aquabotix s warranty Aquabotix shall within a reasonable time after being notified about the defect refund the full purchase price of the product Aquabotix shall have no obligation to repair replace or refund the purchase or product until the customer submits an RMA form and returns the defective product to Aquabotix Warranty does not cover the following damage caused by abuse or misuse improper maintenance incorrect assembly accidental damage or damage due to incorrect power connection as described in the user manual Consumable items including o rings moisture absorbing packs LED lights and batteries are specifically excluded from the warranty Items subject to normal wear and tear include but are not limited to the lens and the outer shell which are only covered for defects in workmanship or materials In no event will Aquabotix be liable for any incidental or consequential damages Opening the AquaLens dome unless instructed by Aquabotix voids this warran
7. nter on your remote 2x This will bring you into the View videos mode To playback the most recent video push ok on the remote You can scroll through the different videos by using the up down arrows To delete all your videos push setup 2x on the remote and select others Hit ok to enter the menu and scroll down to SD Card format delete and hit ok You will be asked if you would like to format SD card By selecting yes you will delete ALL of your videos on the SD card Press setup to return to the main menu To delete a single video please insert the SD card into your computer 15 Directions for Adjusting Date Time using the remote provided 1 Quickly push setup 2 times 2 Scroll down to TIME SETTING 3 Hit OK to select and then scroll down and select SET 4 Press OK to highlight the field that needs to be changed 9 Scroll down through the fields until your desired input is highlighted and select OK 6 Hit SETUP to move to the next number that need to be updated and so on through the rest of the options 7 When finished hit OK and then SETUP to exit the menus 16 WARANTY AquaLens Pro One Year Limited Warranty Certificate Aquabotix warrants that under normal use and service the AquaLens Pro will be free from defects in material and workmanship for one year from the date of purchase applies only to the original purchaser and may not be transferred Unless authorized by Aquabotix any modific
8. pry foreign objects from AquaLens PRO Send AquaLens to Aquabotix for service Additional Restrictions On Use AquaLens PRO is meant for operation by adults over 18 years of age only Keep AquaLens PRO out of the reach of children and supervise children and pets when AquaLens PRO is in operation Do not use AquaLens PRO in rain rough sea conditions and or storms Do not use AquaLens PRO while underwater machinery is in operation Do not touch AquaLens PRO to underwater marine growth Keep AquaLens PRO clear of all underwater objects Do not expose AquaLens PRO to high temperatures above 40 C 104 F avoid direct sunlight Use AquaLens PRO in the recommended operating water temperature range of 2 C 35 F to 32 C 89 F Dropping AquaLens PRO or subjecting it to strong force may damage the device and its watertight dome Handle with care A Failure to follow these important safety instructions and the detailed assembly and use instructions of this manual will void your limited warranty from Aquabotix and may result in serious injury or death Aquabotix disclaims all liability arising from or caused by the failure to assemble and use HydroView in accordance with this manual including all important safety instructions Caution The electronics contained within this topside box are susceptible to water damage The following must be done to prevent water entry Prior to closing the lid all water droplets around the sealing
9. s together be sure to twist the fastener ring until tight 13 Power Lights On Off On Off wilw aquabotix dilm Mcn 3645 61 23 05 59 lt REC y a OK Button STEP 3 Power ON Turn the power on by flipping the left switch To turn on the LED lights flip the right switch After powering the unit on you will be able to see the live video feed on the monitor STEP 4 Recording The screen will show 4 different channels upon startup Select Channel 2 this is the channel that records to the SD card Channels 1 3 and 4 are obsolete The video automatically begins recording when powered on In the top center of the screen you will be able to see the time recorded STEP 5 Recording The OK button on the remote is used to start stop recording the video feed When recording the word record will be written in red on the screen otherwise record will be written in white Video is recorded in 5 minute intervals Please note This remote has other features that are not Supported by Aquabotix 14 Gls Ct E TIS OS D a STEP 6 Recording All video is recorded to the SD card located on the side of the monitor 32 GB card records approximately 17 hours To access the SD card simply push the SD card to release tt Remove the SD card and insert it Into your computer You will now be able to download your videos STEP 7 Playback Delete To playback and or delete all your videos push e
10. ty Claims for damage shortage or errors in shipping must be reported within three 3 days following delivery to the customer Aquabotix is not responsible for returned items lost or damaged during shipping A copy of the dated receipt or bill of sale from the original end user purchase is required to determine coverage This limited warranty gives you specific legal rights and you may also have other rights which vary from state to state For more information returns aquabotix com or 508 676 1000 17
Download Pdf Manuals
Related Search
File filezilla files file explorer filevine login file manager filecr filevine filehippo file converter files folder file transfer filezilla download filemaker filet mignon file compressor file sharing file explorer options file associations settings files app filezilla server filehorse file server filezilla client file explorer windows 10 file explorer this pc