CS-15C9 user manual
Contents
1. User Manual Thank you very much for buying our wireless AV transmission products Please read the instruction below carefully before using it Please install it at the place where the children can not touch Do not expose it at the damp place for preventing it from water or protecting people from electric shock Do not touch the emission antenna in case you will be burned when the transmitter is electrified Please install the antennas before power Power Supply DC 12V 1 25A for both the transmitter and receiver Corresponding Channels with frequencies Item Channel 0 1 2 3 900Mhz 1500mW Frequency 910Mhz 980Mhz 1010Mhz 1040Mhz Installing The cable for TX of 5 plugs for connecting the transmitter camera and power supply One point of the cable is connected with the transmitter and on the other point there re 4 plugs with red yellow white and black The red plug is connected to the power supply DC 12V 1A or battery the white and yellow plugs are connected with the camera s audio and video and the black plug is connected with the camera s power input jack Push the CONTROL button then you may choose the channels Meanwhile push it and last it for several seconds you can close the digital display and turn into saving time mode Then push it again then reply This function is to lock channel so as to avoid mistakenly operation Set the transmitter and receiver in t2. he same channel then you can receive the A V signals f more than one transmitter is to be installed and use only one receiver e g operating 2 transmitters with one receiver set transmitter A to CH1 and set transmitter B to CH2 Set receiver channels Push the CONTROL button to CH1 and MIDDEL lighting then push the CONTROL button for two sec to AUTO lighting Push the CONTROL button to CH2 and MIDDEL lighting then push the CONTROL button for two sec to AUTO lighting Push the CONTROL button to AUTO lighting and now the receiver can auto change between the two transmitters for A V signals 12 channel wireless AV receiver Installing A Use the DC 12V 1 25A power supply B On the receiver s face the digital read out frequencies with accordant channels are 0 1 2 3 means 0 9GHz CH1 CH2 CH3 CH4 and 4 5 6 7 means 1 2GHz CH1 CH2 CH3 CH4 and 8 9 H C means 1 3GHz CH1 CH2 CH3 CH4 C Push the CONTROL button the receiver s frequency and channel can be changed D Make sure the Transmitter and Receiver are set to the same channel
Download Pdf Manuals
Related Search