Manual - Logic RC
Contents
1. Be always updated by check ing periodically for news on our website www graupner de This product complies with national and European legal re quirements To maintain this condition and to ensure safe operation you must read and follow this user manual and the safety notes before using the product NOTE This manual is part of that product It contains important in formation concerning operation and handling Keep these instructions for future reference Take this into consideration when you pass it on to other future owner Service centre Graupner SJ Zentralservice Servicehotline Graupner SJ GmbH S 49 0 7021 722 130 Henriettenstrasse 96 Mon Thu D 73230 Kirchheim Teck 7 30 am 9 00 am 9 15 am 4 00 pm Fri 9 00 am 1 00 pm For the sevice centres outside Germany please refere to our bew Graupner in Internet site WWw graupner de 16520 Copter jh V1 Graupner Intended use The Race Copter is an almost ready to fly remote controlled Quadcopter More punctual information about Race Copter can be found in the Technical data section The Race Copter is designed exclusively to be used as a bat tery powered radio controlled model any other use is not allowed For any improper use no warranty or liability is ac cepted Read through this entire manual before you attempt to pro gram or use the RACE COPTER Graupner SJ constantly works on the development of all products we reserve the right to change t2. Safety notes WARNING gt These safety instructions are intended not only to protect the product but also for your own and other people s safe ty Therefore please read this section very carefully before using the product Do not leave the packaging material lying around this could be a dangerous toy for children Persons including children with reduced physical sensory or mental capabilities or lack of experience or Knowledge or not capable to use safely the Race Copter must not use it without supervision or instruction by a responsible person The operation of radio controlled models must be learned If you have never driven such a model then start extra carefully and make sure to be familiar with the reactions of the model to the remote control commands Proceed responsibly Always carry on a first range test and function test on the ground hold the model tightly before your model is used Repeat the test with the motor running and with short bursts of throttle Before you select the remote control mode you have to check the further relevant laws and regulations These laws you must obey in every case Pay attention to the possibly different laws of the countries The insurance is mandatory for all kinds of model opera tion If you already have one check out whether the opera tion of the model is covered If applicable extend it to spe cial model liability insurance We recommend to provide the copter with a lab
3. 5 MHz Range approx 4000 m Dimensions ca 46 x 21 x 14mm Modulation 2 4 GHz FHSS Current consumption 70 mA Operating voltage 2 5 3 6 8 4 V 347 5x3 1348 5x3 Propellers pitch 13 7 5 cm Weight approx 4 0 g O pitch 5 3 Colour Rot or white rame dimensions Axles distance 22x28 cm Frame height 7 cm Motors height 6 cm Frame 5 6 x 22 5 x 5 5 cm thickness 2 mm gt Arms 10x3 cm thickness 3 mm gt Weight 129 g Conformity declaration C S3055 Ultra Control 12A Speed controller Graupner SJ declares that the product is conform to EU norms EMV 2004 108 EC EN 61000 6 1 EN 61000 6 3 33579 GR 18 receiver Graupner SJ declares that the product is conform to EU norms EN 301 489 1 V1 9 2 EN 301 489 17 V2 1 1 EN 300 328 V1 8 1 EN 60950 1 2006 A11 2009 A1 2010 A12 2011 Vv YV vV vY VV VV FAV Y V V mbt V VV VV VV VW wo 16520 Copter jh V1 INNOVATION 8 TECHNOLOGIE Spare parts 4x x x x 1x x 4x x 4x 6x Bx 5x 29x Ox 17x 5x 9x 5x 1x More interesting current accessories such as FPV goggles transmitter cameras propellers batteries motors and speed controllers for your Race Copter see Accessories for the respec tive items on our website in the online shop www graupner de 16520_Copter_jh_V1 11 Groupner 12 INNOVATION amp TECHNOLOGIE Notes on environmental protection DISPOSAL NOTES This symbol on the product user manual or packaging indi cates t
4. to another transmitter red LED blinks Pushing the SET button the receiver will be set in Bind mode If you want to bind an already binded receiver to another memory follow the next steps gt Turn off the RF module in the Basic setting menu see transmitter s manual gt Switch on the receiver pushing the SET button to bring it in bind mode gt Start the binding in the Basic setting menu gt If within 10 seconds the red light turns off and the green LED will light the binding process was successful Your RC system is now ready for use gt If the red LED is still on it means that the binding process didn t work properly In this case repeat the procedure Transmitter settings Setting the flight mode Attitude or Rate mode In the transmitter it must be selected a free model memory the model type must be surface model and the channel 1 direction must be set to channel 1 in motor off position in the power indicator must show 100 The flight mode must be set on channel 5 Then program a two way switch for channel 5 to control the flight mode Attitude mode Channel 5 100 to 0 The stick movement determinates the Copter reaction on Roll and Nick It allows a maximal angle of about 50 at 100 of stick movement Mode suggested for beginners The stick movements acts directly proportionally to Roll and Nick Rate mode Channel 5 0 to 100 The stick movement determinates the rate wit
5. INNOVATION amp TECHNOLOGY Groupner Manual Race Copter Alpha 250 Q No 16520 HOTT CE COPTER ZSOM Graupner Index MOEK esine rE E NE EEEE 2 MP OCIIC IO M a iien E E Ra 3 SENICE CENIO Pe ETT 3 MENASE USE cc Patis messi mites aes 4 gle este dic a 4 Symbols SXGNICAUOM da EET 5 SEENA EAT E E 5 Preparation f r SE ms tic et 7 Receiver s INGUIN ei ics T ane miittel SS ne e a T Gyro initializing in the receiver ssssssssssssssrrrrrrrrrrrrrrrrrreee 8 First USE ena a Iu N sores 8 Suggested accessories sss esssseesstttrrrrtrtttttnrrrtrttenrt rren 9 Design example with camera and transmitter 9 TEC CAE icones matances aten matat iu da oai E 10 Conformity AeClaration ccccccccccssseeccceecseeesseeeeseeeeeeeeeesaees 10 Spar PANS escates cas Rocio ade ia 11 Notes on environmental Protection cccceccesseeeeeeseaeees 12 Waranty cl parcels esca a aa Si geal 12 16520 Copter jh V1 INNOVATION 8 TECHNOLOGIE Introduction Thank you very much for choosing a Graupner RACE COPTER ALPHA 2500 This Race Copter is extremely versatile Read this manual carefully to achieve the best results with your Race Copter and first of all to control safely your model If you experience any trouble during operation take the instruc tions to help or ask your dealer or Graupner Service Centre Due to technical changes the information may be changed in this manual without prior notice
6. any errors or inaccuracies that may appear in construction or operation manuals No liability can be accepted for printing errors 16520 Copter jh V1
7. el where are indicated the name address tel n E mail and Insurance n So that the copter can be clearly assigned in the event of a crash For safety and CE certification the unauthorized conver sion and or modification of the product is not permitted They may only be used our recommended components and accessories Use only genuine matching Graupner connectors of the same design and the same material Make sure that all connections are secure Do not pull on the cables when you unplug the connector 16520 Copter jh V1 Graupner gt Protect the Race Copter from dust dirt moisture and other foreign parts Do not expose this equipment to vibration and excessive heat or cold The remote control operation may be carried out only in normal ambient temperatures in a range from 10 C to 55 C Use all of your Hott components only with the latest Soft ware version If any questions arise that can not be ascertained with the help of the operating manual please contact us contact information see page 3 or another expert WARNING gt Pay attention even while programming that the connect ed motors do not start suddenly Injury risk by the turning propellers Program always the motors stop switch on the transmitter See transmitter manual Avoid shock and pressure Check the Race Copter regu larly for damages to the housings and cables Damaged or wet electronic components even if re dried should n
8. hat this product must not be disposed of with other household waste at the end of its life It must be handed over to the applicable collection point for the recycling of electrical and electronic equipment The materials are recyclable as marked By recycling material reusing or other forms of scrap usage you are making an im portant contribution to environmental protection Batteries and accumulators must be removed from the device and disposed of at an appropriate collection point Please in quire if necessary from the local authority for the appropriate disposal site Warranty The Graupner SJ GmbH Henriettenstrassee 96 73230 Kirchheim Teck grants from the date of purchase of this product for a period of 24 months The warranty applies only to the material or operational defects already existing when you purchased the item Damage due to wear overloading incorrect accessories or improper handling are excluded from the guarantee The legal rights and claims are not affected by this guarantee Please check exactly defects before a claim or send the product because we have to ask you to pay ship ping costs if the item is free from defects The present construction or user manual is for informational purposes only and may be changed without prior notice The current version can be found on the Internet at www graupner de on the relevant product page In addition the company Graupner SJ GmbH has no responsibility or liability for
9. he item its technol ogy and equipment Target group The product is not a toy It is not suitable for children under 14 years The installation and operation of the controller must be performed by experienced modellers If you do not have suf ficient knowledge about dealing with radio controlled models please contact an experienced modeller or a model club Features Receiver with specific Quadcopter firmware Stabilization of the Copter on all 3 axes Natural flight performance Very good stabilization for aerobatic figures Easy adjusting of the gyro settings Parameters setting by the HoTT Telemetry Altitude sensor for vario and altitude vvv v v v v Package content gt RACE COPTER ALPHA 250Q with motors speed controllers 2x 1347 5X3 2x 1348 5X3 propellers 2x LED PCB mounted 33579 HoTT gyro receiver 33630 Voltage module with manual Voltage module adapter for Fatshark transmitter Manual Race Copter Alpha 250Q You can find the detailed manual for the speed controllers and receiver on their respective pages on the web site www graupner de vvv v v v 16520_Copter_jh_V1 ap INNOVATION 8 TECHNOLOGIE Symbols explication Always follow the information marked with the CAUTION or WARNING symbol The signal word WARNING indicates the potential for serious injury the signal word CAUTION indicates potential minor injuries The NOTE indicates important information that should alert you to potential property damage
10. hout angle limit Aerobatic mode that allows Rolls and Loopings Do not forget to set the Fail safe We suggest to set the fail safe on channel 5 at 100 so that in fail safe it is active the attitude mode 16520_Copter_jh_V1 Groupner Initialisation by switching on Safety function motors off Installing the propellers Gyro initializing in the receiver After switching on the Copter the gyro is already active but not yet initialized To initialize it hold the Copter still after switch ing on The calibration will be done only when the regeiver is completely still After 3 seconds in still position you will hear beeps emitted by all motors The signal tone can variate depending on the esc model The beeps will stop when the calibration and ini tialization is complete Wait until the initialization is complete before you start the model The motors will not start until the calibration is complete First use The receiver is optimally set for Race Copter Alpha 250Q If you want to change however some settings follows the in structions content in the receiver manual Download at www graupner de Select the flight mode as previously mentioned by the trans mitter This procedure is described in the receiver manual in the section Transmitter settings Install the propellers as shown in the picture below Pay atten tion to install the proper propeller to each motor The propeller rotation sense is written on the propel
11. ler R L Picture shows copter from top view 1 Motor clockwise 2 Motor counter clockwise Propeller L Propeller R 4 Motor counter clockwise 3 Motor clockwise Propeller R Propeller L Choose a wide area for your first flight We suggest to select first the flight mode because the Copter is thus easier to con trol and to become familiar with the flight characteristics of Copter Proceed carefully and responsibly 16520 Copter jh V1 So you can make your Copter an FPV Race Copter INNOVATION amp TECHNOLOGIE Suggested accessories 9717 3 D35 LiPo battery V MAXX 50C 3 1500 11 1V XT60 48331 Pilot HD Cam 16520 40 ALPHA 250 MINI CAMERA 48326 5 8 GHz 25mW AV transmitter 1002 mz 12 or 33112 MX 12 48325 Fatshark AttitudeV2 CE Kit goggles 48323 Fatshark Dominator HD Headset goggles Vv Vv Vv VV VW VW Design example with camera and transmitter 16520 Copter jh V1 Graupner 10 Technical Data 7047 S7048 ULTRA 2804 2300KV Brushless Motor clockwise and counter clockwise gt Turns Volt 2300KV gt Diameter 28mm gt Input voltage 2 4S LiPo gt Shaft diameter 5mm clockwise and counter clockwise 3055 Ultra Control 12A speed controller gt Input voltage 2 4S LiPo Dimensions mm 25x20x7 Weight 9 Gramm Maximal current 12A BEC output 1A 5V 33579 GR 18 receiver Operating temperature 15 70 C Antennas 2 x wires 145 mm Total weight approx 14 g Frequency 2400 2483
12. o longer be used Never touch the turning propellers this can cause serious injury The propellers must be mounted securely thrown parts can cause serious injury Keep long hair loose clothing such as scarves loose shirts or similar well away from the danger zone of the revolving propeller they may be withdrawn by the propeller flying debris can cause serious injury Follow the safety notes of the required additional compo nents Notes gt After you perceive your model check if all components are inside the package and eventual damages Remove the battery from the model when transporting or when not in use During transport protect the model and the transmitter from damages Care Clean the Copter only with the suitable cleaners Good is a spirit free cloth Never use chemical cleaners solvents pet rol alcohol or similar 16520 Copter jh V1 INNOVATION 8 TECHNOLOGIE Preparation for start To start fling you need the following items gt Transmitter MX 12 MZ 12 or higher gt Battery pack Graupner 9717 3 D35 or similar Battery installation Fix the battery in its compartment using some hook and loop tape Place the battery so that the copter s centre of gravity is in the middle of the frame Binding the receiver with the transmitter Read the transmitter and receiver manual before you try to bind them Receiver s binding The binding is only possible if the receiver has not yet been binded
Download Pdf Manuals
Related Search