Model 701962 All-Purpose Instrument Cart User`s Manual
Contents
1. Casters 2 with stoppers Instrument Size Restrictions Each shelf can support instruments weighing up to fifty kilograms Cart Specifications Item Outer maximum dimensions 467 mm W x 693 mm D x 713 mm H Upper lower shelf dimensions 457 mm W x 683 mm D Drawer 610 mm W x 380 mm D Slide out table 380 mm W x 440 mm D Casters 100 mm diameter wheels front casters with stoppers Maximum load per shelf 50 kg Cart weight 23 5 kg Assembly Refer to the assembly diagrams when assembling the cart 1 Assembling the Supports and Lower Shelf Loosely attach a support to each corner of the lower shelf with a screw Screws 2 Assembling the Upper Shelf Place the upper shelf on the open ends of the four supports then loosely attach the supports to each corner of the upper shelf with screws 3 Tightening the Screws While adjusting any misalignments tighten all screws securely 4 Attaching the Casters Screw the casters into the caster holes located at the four corners of the bottom shelf The two front casters have a stopper Screw in the L casters IM 701962 01E2. User s Model 701962 Manual All Purpose Instrument Cart The Model 701962 All Purpose Instrument Cart can support large scale measuring instruments Each shelf accepts a maximum load of fifty kilograms and a drawer is provided underneath the top shelf for storing measuring instrument parts and accessories The cart features a slide out table that can be used for a keyboard or other items 1st Edition April 2004 YK All Rights Reserved Copyright 2004 Yokogawa Electric Corporation IM 701962 01E YOKOGAWA core 1st Edition Safety Precautions For safe use of this product please take the following precautions e Keep the Cart Level As much as possible use the cart only on horizontal surfaces When moving a loaded cart over an inclined or bumpy surface ensure that the cart does not tip over and that the instrument does not fall off the cart Double Check Safety during Non Specified Use Loading an instrument other than the ones recommended onto the cart or changing the instrument s position can alter the balance of the cart Before use make sure the cart does not tip over easily e Ground the Instrument The cart is not grounded Ground the instrument loaded on the cart using a 3 wire power supply cord Do Not Exceed the Maximum Load Ensure that the weight of the instruments loaded on each shelf does not exceed the specification Outline Slide out table Drawer Supports 4 od Ja
Download Pdf Manuals
Related Search