Digital Satellite Receiver SRT 6780
Contents
1. Configuration TV VCR Configuration Information Solving problems Specification General information Precautions Never open your set yourself It could be dangerous and you risk electric shock or damaging the set The opening of the box is protected by a warranty sticker on the rear panel Any noticed dammage will invalidate the warranty conditions of your equipment Installation Ensure that the voltage from the mains in your room complies with that indicated on the back of your set identification label screen marking etc Do not connect an AC or DC power supply other than that from the mains Ensure that the electric plug is fully connected into the wall socket Leave the mains socket accessible so that you can unplug the set quickly Place the set horizontally away from any source of heat sunlight radiator fireplace etc or from equipment which produces high magnetic or electrical fields motors non insulated loud speakers etc If you install your set in a cabinet ensure that it has enough ventilation Leave 7 to 10 cm around the set as shown in the enclosed drawing The openings on top and underneath the set are for ventilation purposes They must not be obstructed Use The set is designed for use in a dry place If under exceptional circumstances you happen to use it outdoors e g on a balcony or in a tent make absolutely certain that it is2. Channels Search menu is displayed Channels Search Frequency MHZ 12054 Polsrization Syribol Rate kbauds 27500 ree S N ify parameters villi navigation Ba Refer to chapter First installation page 16 for more information on this menu Channels erase select Channels erase field and press OK Channels Erase screen is displayed Press OK if you want to erase the entire services list Caution All memorized channels will be erased 30 _ _ _ Other settings TV VCR Configuration This menu allows you to set TV VCR settings to your personal preferences Select TV VCR Configuration field in the Configuration menu and press OK TV VCR Configuration menu is displayed and TV Format field is selected lt gt 7RONG DIGITALTV TV VCR Configuration 7 Navigate TV Format With 4 gt button set your TV format to 4 3 Letterbox 16 9 or 4 3 Pan and Scan TV Output signal With 4 gt button set your TV mode to RGB S Video or CVBS VCR Output signal With 4 gt button set your TV mode to S Video CVBS Video standard With 4 gt button set your Video standard to SECAM or PAL Time Zone Select Time Zone in the Configuration menu and press OK Time Zone screen is displayed With lt gt button select your Local time zone 3l Other settings Modem Configuration This menu allows you to
3. STRONG DIGITAL TV STRONG m6780 vigta satente Recover Digital Satellite Receiver SRT 6780 User manual Bruksanvisning Bruksanvisning Betjeningsvejledning K ytt ohje www strong tv com General information Summary Precautions Welcome to digital satellite TV Your remote control Inserting the batteries Remote control buttons quick reference Your set up box Front Rear panel connectors overview Installation Before you begin What else do Connecting to other equipment Connection method I ToTV and VCR Connection method 2 To TV only Connecting to the telephone line Inserting your smart card Connecting to the mains supply Switching on for the first time Checking the installation screens Choosing your language Time menu Antenna configuration menu Checking the signal Channels Search menu Searching for channels Day to day use Decoder switch ON Standby Volume setting TV channels access Radio channels access TV Banner Extended Information TV Miniguide TV Channel list Programm Guide Extra information Recording a digital satellite programme Teletext access Other settings Displaying the Main Menu Channels Program Guide Conditional Access Preferences
4. access this menu Receiver PIN code is requested Select Default Configuration Restoration field in the Configuration menu and press OK Default Configuration Restoration screen is displayed Be cautious if you press OK ALL YOUR SETTINGS will be erased Press OK to return all parameters to default settings and return to Configuration menu Information Select Information in the Main menu and press OK Information menu is displayed and Decoder Information field is highlighted STRONG DIGITAL TV Information Select your option With navigation keys te Validate Back Press OK to access Decoder Information menu Decoder Information This menu allows you to get information on your set top box model name firmware version software version serial number These data could be of interest for your Viasat customers care service Press BACK to return to Information menu or press EXIT to exit the menu Signal Quality Select Signal Quality field in the Information menu and press OK Signal Quality screen is displayed This menu allows you to check the quality of the satellite signal received by your set top box Check that the signal is correct and press BACK to return to Information menu or press EXIT to exit the menu 33 34 Solving problems Solving problems Before you check connections between your equipment make sure you disconnect all your equipment from the mains supply When you hav
5. define the modem prefix numbers to be automatically dialed before a phone number to access the public phone network Select Modem Configuration field in the Configuration menu and press OK Modem Configuration screen is displayed Phy 7277 77 DIGITALTV Navigate Back Exit External line prefix Select from digit to 10 digits if a dialing prefix is needed select Not required otherwise Prefix Value With remote control digits buttons enter the prefix number needed Software Upgrade This menu allows you to upgrade the software of your decoder from satellite Select Software Upgrade field in the Configuration menu and press OK Software Upgrade screen is displayed You can either manually set the expected parameters or activate the automatic software download With lt gt button select Automatic Take all default values or last manual succeeded values Manual Take entered values from specific menu see below Then press OK to validate If Automatic software update has been selected it will be launched immediately If Manual software update has been selected you will be asked to fill the following fields Satellite frequency MHz Polarization Symbol Rate FEC Once these parameters are set press OK to validate and launch the software upgrade Other settings Default Configuration Restoration This menu allows you to return to factory preset parameters To
6. has a SCART connector DC Supply in 12V WARNING Always disconnect your set top box from the DC supply before you connect it to or disconnect it from any other equipment Installation Installation To install your set top box follow the instructions from this page up to page 17 Before you begin The supplied equipment If you have not already done so remove all the packaging You should have the following items Set top box see page 6 Remote control and batteries see page 4 User guide DC pack I2 V SCART lead Telephone lead RJI to RJI I Telephone line RJI I adapter suitable for your location see page 10 Set top box Smart Card SCART cable cow DC pack 12 V Telephone lead RJI I to RJI I Installation What else do I need Smart card If you wish to view premium services you will need a smart card This is available from your service provider Viasat Satellite dish You will also need a correctly installed satellite dish pointing at the correct satellite s If you are already a Viasat customer and are using your satellite dish to tune toViasat analogue channels you should not need to make any adjustment to your dish just go straight to page 9 to continue the installation If you have a satellite dish but it is not pointing at the correct satellite s you will need to make adjustments Please see the information supplie
7. protected from humidity dew rain splashes and from heat If the set has spent some time in a cold atmosphere after transport during winter wait until the condensation has evaporated from the metal parts before connecting it The set is intended to operate at an ambient temperature of less than 40 Celsius and a maximum humidity level of 95 It must not under any circumstances be used for industrial purposes as it was designed for domestic use only In case of a storm It is recommended that you unplug the set from the mains and from the socket connected to the outside aerial As a general rule it is preferable to unplug the set from the mains if you are away for a prolonged period If you smell any suspicious odours or see smoke coming from the set unplug the set immediately and have it checked by an approved technician Maintenance Use a dry clean soft cloth with no cleaning solvent or abrasive products etc The openings on top of and underneath the set are for ventilation purposes and must not be obstructed Clean the ventilation grilles regularly If an object or liquid gets into the set unplug the set immediately and have it checked by an approved technician This symbol on your set guarantees that your product complies with the European directives 73 23 EEC and 89 336 EEC on safety and electromagnetic compatibility A This symbol indicates Dangerous voltage in the set It represents the risk of electric shock or bod
8. 4 and gt To move up down left and right through the menu OK To confirm a choice or make a selection TEXT To access Teletext Number buttons 0 9 To change channel and enter numbers RADIO To open the Radio Navigator DVD shortcuts keys Control directly the DVD player even if you are in TV or SAT mode on your remote control unit INFO To display the zapping banner and extended program information Note Some of these buttons are described in more detail on the next page Your set up box Your set up box Front panel 5 button Y To switch your set top To change channel box on or on standby up or down Sat a a sy a 76780 Digital Satellite Receiver Yellow light Green light Smart card slot Lights up when your set top Lights up when To insert your smart card box is on standby your set top box is on Rear panel connectors overview Full details about connecting up and installing your set top box begin on page 7 To connect the connect your receiver to your To connect the audio lead from your TV using an RCA cable signal to an external satellite dish amplifier or to the audio input of your TV To connect your receiver to a digital Home Dolby amplifier To connect the telephone lead To connect to the SCART connector on your VCR if your VCR has a SCART connector To connect to the SCART connector on your TV if your TV
9. Operating voltage I2V DC Power consumption 20 W max Weight 1 3 kg Dimensions W x H x D 252 mm x 42 mm x 138 mm Operating temperature range 0 C to 40 C Storage temperature range Rear and side panel connectors Input DC Telephone line RJII Others 20 C to 60 C TV Scart VCR Scart Video cinch audio cinch Tuner RF SPIDIF coaxial Dish input IEC 169 24 F type female 35 wwWw strong tv com TCM 36573620
10. ange the favorite list if created to change the subtitles languages if available to change Audio languages if available Select the desired field with W A keys and set with 4 gt keys TV channel list or TV Miniguide Press GUIDE key to switch to the TV channels list Press GUIDE key more than 2 seconds to switch to the TV Miniguide Press the EXIT button to erase the displayed information Day to day use TV Miniguide The TV Miniguide allows you to display at the same time the TV channel list the corresponding TV channel information if available the corresponding live video in a small window Direct access from any TV channel Press GUIDE key more than 2 seconds From the menu Press MENU button on the remote control unit to access to the Main menu Select Channels press OK and with A V keys select TV Channels Press OK to confirm STRONG DIGITAL TV TV Channels Press info key tordisplay extended information navigate validate f Back ft Exit If you have defined TV favorites lists the name of the current TV favorite list is displayed at the top left of the screen The OPTIONS key allows you to change your current TV favorite list Press PR PR or A V keys to select the previous next TV channel in the list The selected TV channel is displayed in the small window The 4 and gt buttons allow you to navigate through previous next pages Press OK on the remote
11. asat network if not it displays the TV mini guide see page 22 24 Other settings Conditional Access Select Conditional Access field in the Main menu and press OK Conditional Access menu is displayed and Viasat is highlighted STRONG DIGITAL TV Conditional Access Select your option Withihavigation keys navigate _ validate Back Exit If the line Viasat is not selected select it with A W keys and press OK You can now navigate the menu which is provided by the embedded Viasat CAS module Subscription User Limits Press BACK to return to Conditional Access menu or press EXIT to exit the menu The Conditional Access menu displays the following options for consulting or settings parameters for Subscriptions User Limits Smart Card PIN Code Modification Select the desired item with A Ww keys and press OK on the remote control to display the associated sub menu Subscriptions Select this option to Display the subscription right status User Limits To navigate into the following sub menus you are asked to enter your Smart Card PIN code Default value of your Smart Card PiN code is 0000 This feature allows you To define a morality level to limit access to certain program categories The choice Any program disables the parental rating lock all programs are viewable without any PIN code For all other values the Smart card PIN code will be required when th
12. control unit to display the full size video of the selected service on TV screen Press EXIT or BACK on the remote control unit to exit the TV Miniguide 2 Day to day use TV Channel list Direct access from any TV channel Press the GUIDE key once to display the TV Channel list 158 change list Pressing the GUIDE key for more than 2 seconds gives access to the TV Miniguide Press A V keys to select the previous next TV channel in the list The lt and gt buttons allow you to navigate through previous next pages Press OK on the remote control unit to display the selected channel on TV screen Press EXIT or BACK on the remote control unit to exit the TV Channel list Programm Guide Press GUIDE key on the remote control or select Programme Guide field in the Main menu and press OK Once you have press OK you enter the Viasat portal of applications Through this portal you can access and navigate into the following applications EPG Electronic Program Guide Weather forecast Games News Music guide Pay Per View Ticket Extra information Extra information Recording a digital satellite program If you have aVCR you can use it to record satellite programs from your set top box To record a satellite program 1 Make sure your set top box is switched on and tuned to the channel you wish to record 2 Set your VCR cor
13. ction You can now continue the installation by turning to the section Cheking the installation screens on page 13 If the Languages screen does not display If you have connected your set top box to your TV via a SCART lead as in methods and 2 try selecting your TV s AV input Installation Checking the installation screens For most intallations this is easy to do if you follow these instructions However for some installations you may need to make additionnal settings see the Other settings section starting on page 24 Note At any time during the first time installation process you can return to previous screen by pressing BACK button Choosing your language If you have completed the installation instructions up to this point the following screen is displayed on your TV screen STRONG DIGITAL TV Language selection le please seleck your native language with UP DOV te _ 6k Validate 1 Take your remote control If you have not already inserted the batteries do so now see page 4 2 Press A or W key until the language you want is highlighted then press OK A Welcome screen now displays Note For Swedish Norwish Danish and Finnih the Welcome screen appears in the selected language 3 To change the language press BACK then repeat step 2 or to confirm your choice press OK Time menu Once you have confirmed the language the Time menu is displayed Select your local time zo
14. d buttons depend on the displayed Teletext In default mode the Teletext magazine hide the current video picture The Teletext page can also be displayed in transparency mode to let you watch the video in background picture This setting is enabled disabled by pressing the BACK key as you are displaying the teletext magazine Press again TEXT button or EXIT button to exit from the Teletext magazine 23 Other settings Other settings Displaying the Main Menu You need to display the Main Menu in order to perform other settings You can also use the Main Menu to display the TV and Radio channel lists see page 18 To display the Main Menu 1 Press MENU STRONG DIGITAL TV Select your option Witi navigation Keys navigate _ validate 2 Press A or to highlight the item you want then press OK 3 To remove the Main Menu press EXIT Channels Select Channels field and press OK Channels menu is displayed and TV Channels is highlighted Press OK to access the TV Miniguide Refer to Day to day use chapter page 21 for more information on the TV Miniguide use Radio Channels Select Radio Channels field and press OK Radio Channels list is displayed Refer to Day to day use chapter page 18 for more information on the Radio Channels list use Program Guide Select Program Guide field and press OK Once you have pressed OK you enter the Viasat portal of applications if you are installed on the Vi
15. d with your dish LNB for details on how to do this or seek professional advice If you do not have a satellite dish installed please ask your dealer to recommend a local dish installation engineer Installation Connecting to other equipment Before you start make sure that your TV VCR and set top box will be placed in a location that is conveniently located near an easily accessible mains wall socket within reach of your TV antenna and satellite dish leads within 10 metres of a telephone point If not you will need an extension telephone lead WARNING Before you connect your set top box to any other equipment you must disconnect ALL the equipment from the mains supply Connection method I ToTV and VCR If you have a VCR and a TV with SCART connectors you can connect up as shown in the diagram below SCART lead not supplied I Use the supplied SCART lead to connect your set top box to your TV s SCART input as shown 2 Use a SCART lead not supplied to connect your set top box to your VCR s SCART input as shown 3 Connect the lead from your satellite dish to the satellite input connector on your set top box as shown Installation Connection method 2 To TV only If you wish to connect your set top box to a TV only connect up as described below 1 Use the supplied SCART lead to connect your set top box to your TV 2 Connect the lead from your
16. e finished checking and making connections safely reconnect all the equipment to the mains supply see page 1 1 Problem Your set top box doesn t seem to be working and there are no lights on the front panel Your set top box doesn t seem to be working and the front panel standby light is red Your set top box doesn t seem to be working and the front panel standby light is green You can see on screen interference Your remote control isn t working Possible cause Your set top box is not receiving power Your set top box is switched off Your set top box is not correctly connected to your other equipment or your other equipment is not correctly set up Your TV is not switched to show digital satellite channels Your TV is not correctly tuned Something is between the remote control and your set top box The batteries are flat or inserted the wrong way round Suggested solution Make sure that the mains plug is properly plugged in and that the mains supply is switched on Check that the mains wall socket has power try plugging in a lamp Press standby on the front panel or 4 on your remote control Check that all the connections are properly made Check that your TV is plugged into the mains and that it is switched on If your set top box is connected to your TV via a SCART lead try selecting the appropriate AV channel on your TV Check that your TV is correctly tu
17. e rating of the current event indicates that all viewers are at least as old as the selected rating To set a purchases threshold in order to be informed afterward when the defined threshold will be exceeded Smart Card PIN Code Modification This feature allows you to modify your Smart Card PIN Code Refer to page 28 for more explanations on how to change your PIN code Other settings Preferences Select Preferences field and press OK Preferences menu is displayed and Languages field is highlighted STRONG DIGITAL TV Preferences Display Options Favorite lists Parental Contrel Languages While Languages field is highlighted press OK Languages menu is displayed This screen allows you to select the desired language for menus as well as for audio and subtitles if available Languages Menu tanguage Addo ERSTER A English Audio language 2 English SUptitle language 1 English zsubtidie language 2 ange menu language with navig Select a line with A W keys and select a language with 4 gt keys Press EXIT to confirm your choice and exit the menu or press BACK to return to Preferences menu Display options Select Display Options field in the Preferences menu and press OK Display Options menu is displayed Banner Time out s Define the display duration of the Zapping Banner after a zapping The allowed values are between to 9 seconds With digit buttons enter the desired Bann
18. e two supplied AAA batteries as follows 1 Remove the cover 2 Insert the batteries according to this drawing Observe the polarity w Replace the cover F F Don t leave flat batteries in your remote control Replace both batteries at the same time Dispose of flat batteries in an environmentally friendly way ny Please respect the environment and prevailing regulations Before you dispose of batteries IM or accumulators ask your dealer whether they are subject to special recycling and if he e accepts to take them back Your remote control Remote control buttons quick reference SAT DVD TV Select the device you want to control To turn the sound on or off A l To change the volume up or down EXIT To remove a menu or on screen display and redisplay digital TV or Radio OPEN CLOSE To open access option window LIST Access to TV list AV Switch between TV and SAT programs GUIDE To display the Viasat portal to use interactive services if available OPTIONS To change the audio or subtitle language if available N 9 AR RADIO z VE S OPTIONS STRO To put your set top box into or out of standby PR To change channel up or down BACK To go back to the previous TV Radio channel or menu MENU To display the main menu lt
19. er Time out Press EXIT to exit the menu or press BACK to return to Preferences menu 26 Other settings Favorite Lists Select Favorite Lists field in the Preferences menu and press OK Favorite Lists menu is displayed This menu allows you to create a favorite list or to modify an existing one New list With A V keys select the list you want to define and press OK List Definition screen is displayed Press 4 gt keys to select a character field Press A W keys to modify the character Once the name of the list has been defined press 4 or gt key until Type field is highlighted Then with lt or gt keys select if it is a Radio or a TV list Once the type of EN the list is defined press OK the List Editing screen is displayed With A W keys select a channel in the list and press OK to include it in your Favorite List a tick is displayed behind the channel s name Repeat the previous step to select other channels Press EXIT to validate and exit the menu Existing one With A V keys select the already existing list you want to amend and press OK Action field is selected Select what you want to do on the list Modify if you want to change the name of the list and add or delete TV channels from the list Organize if you want to organize the list Delete if you want to delete the whole list Parental Control The Parental Control menu allows you to lock unlock channels acc
20. er the channel number 4 digits maximum of the desired service If the requested TV channel number does not exist the lower nearest one is selected Back to last TV channel Press BACK button to switch to the last TV channel Radio channels access Direct Access Press RADIO key to open to the Radio services navigator From the menu Press MENU button on the remote control unit to access to the Main menu Select Channels press OK and with A V keys select Radio Channels Press OK to confirm Radio Zapping Press PR PR or A V keys to select the previous next Radio channel in the list The selected Radio channel is played The 4 and gt buttons allow you to navigate through previous next pages of the Radio list The digit buttons of your remote control unit allows you to directly access to any Radio channel number Enter the channel number 3 digits maximum of the desired service If the requested Radio channel number does not exist the lower nearest one is selected If you have defined Radio favorites lists the name of the current Radio favorite list is displayed at the top left of the screen The OPTIONS key allows you to change your current Radio favorite list Press EXIT to return to the last TV channel Day to day use Zapping Banner Extended Information banner You can get two levels of information related to the current played event TV banner basic channel information Extended event descr
21. ess rights Select Parental Control field and press OK The receiver PIN code is requested to enter this menu Default value of the receiver PIN code is 0000 With digit numbers keys of your remote control enter the receiver PIN code 27 28 Other settings Once the fourth digit is entered Parental Control menu is displayed and Decoder Lock field is selected lt gt 7RONG DIGITAL TV Select your option With navigation keys Navigate validate Back exit Tick the box with OK key if you want to lock the decoder To unlock the decoder untick the box This function enables you to watch all the channels even if they had been locked previously as long as the decoder is awake it will be automatically relock at standby Channels Locking This field is only selected if you have activated Decoder Lock field Select Channels Locking field and press OK Channels Locking list is displayed With A V keys select the channels you want lock and press OK A tick is displayed behind the channel name Press EXIT to confirm and exit the menu Receiver PIN Code modification Select Receiver PIN Code Modification field and press OK Receiver PIN Code Modification screen is displayed STRONG DIGITAL TV PIN Code Modification Enter the new PIN Confirm the new PIN Navigate _ validate Back Exit This menu allows you to modify the PIN code of your decoder With digit numbers keys of you
22. g at Installation Type field a new menu is displayed on which you can search for at least 6 Symbol rate on a satellite Select successively each field and enter the desired Symbol rate number Once Channels search menu is set press OK to start searching Searching for channels Once you have confirmed the channels search settings the channel auto search screen is displayed A progress screen confirm that the search is taking place LNB 1 Astra 2 28 2 E 51 Type of Service TVi Channels Radio Channels Other Services When the search is complete a screen is displayed to tell you the number of TV radio channels and other services that your set top box has found You can return to previous screen by pressing the BACK button 1 To confirm this channels and display the next screen press OK 2 To watch TV channels press OK Day to day use Day to day use Decoder switch ON Standby Press b button on the remote control unit or on the front panel to switch ON Standby your decoder Volume setting Volume You can set the volume level with 21 buttons Sound mute Press f button to mute the sound Press it again to restore the sound TV channels access TV Zapping Press PR button to access previous TV channel Press PR button to access next TV channel TV channels direct selection The digit buttons of your remote control unit allows you to directly access to any TV channel number Ent
23. ily injury Note This product is designed and manufactured with high quality materials and W components which can be recycled and reused This symbol means that electrical and electronic equipment at their end of life should be disposed of separately from your household waste Please dispose of this equipment at your local community waste collection recycling centre In the European Union there are separate collection systems for used electrical and electronic product Please help us to conserve the environment we live in General information Welcome to digital satellite T V Thank you for choosing the STRONG set top box Please follow the instructions in this User Guide carefully to enjoy all the advantages of digital satelliteTV We advise following the user instructions and recommendations supplied with your set top box especially for first time use Your set top box fully complies with international DVB Digital Video Broadcasting standards Updates to your set top box From time to time your set top box may be updated These updates provide enhanced features new screens and menus may become available Although any new screens and menus may look a little different from those described in this User Guide you should be able to use the same techniques e g highlight and select with them Your remote control Your remote control Inserting the batteries Before you can use your remote control you must insert th
24. iption The Basic channel information is displayed through a Zapping Banner that is either shortly displayed after each Zapping or by pressing the INFO key amp Somewhere in the world 10 00 C 11 15 SIER All TV accessoption amp TV List You can adjust the display duration of the Zapping Banner in the Preferences Menu The Extended event description is displayed erased by pressing again the INFO key while the TV Banner information is present Whilst TV information is displayed Next Present event information If available Press gt key to display the next event information Press 4 key to display the present event information Next Previous TV channel information Virtual Zapping Press A key to display the next service information Press W key to display the previous service information Press OK key to watch the specified TV channel 20 Day to day use Access option Following icons may be displayed at the bottom line of the information banner Availability of another audio language Availability of another Subtitle language Name of the current channels list If one of these icons is displayed a option icon at the bottom of the information banner inform you that you can access the option screen Press OPTIONS button on the remote control the Option screen is displayed re in the world 10 00 23 11 15 access option This screen allows you to ch
25. ly Do not bend your smart card keep it away from children and pets Do not put your smart card in liquids or use cleaning fluids on it Connecting to the mains supply 1 Once you have safely made all the other connections connect the DC plug of the DC pack to the DC input on your decoder as shown in the diagram below Connect the mains plug of the DC pack to the mains wall socket If there is a switch by the mains wall socket switch it on 4 Connect your other equipment to the mains supply WM WARNING DO NOT connect the mains plug to the wall socket until you have made ALL the other connections Notes Your set top box operates with 12 V DC power supply The only way to disconnect your set top box from the mains is to remove the AC adaptor from the mains wall socket Your set top box must therefore be installed near to the mains socket outlet which should be easily accessible Installation Switching on for the first time When you connect your set top box to the mains all the lights on the front panel will light up After around 5 seconds only the standby light remains light Press SAT key decoder key on your remote control to control your set top box then press 5 key to switch it on The light turns green Make sure your TV is switched on If the Language selection screen below displays your TV is ready for digital satellite channels lt gt 7RONG DIGITAL TV Language sele
26. ne then press OK Installation Antenna configuration menu The Antenna configuration menu is displayed and Antenna Configuration field is selected STRONG DIGITAL TV Antenna Configuration Atene contigua er ify configuration Navigate 9 validate Depending on your antenna configuration select One LNB if you have only one antenna DiSEqC if you have 2 3 or 4 antennas connected to the set top box through a DiSEqC switch SMATV if you are using a local network LNB feed Select Yes if your antenna configuration is One LNB In this case you will be able to receive update of your Conditional Access rights even in Standby mode Select No if your antenna configuration is SMATV Select Auto if you want an LNB feed only when the set top box is on You will not be able to receive an update of your Conditional Access rights in Standby mode LNB index This field is only displayed if you have selected DiSEqC at the Antenna Configuration field According to the DiSEqC switch input where the antenna is connected select corresponding Index from to 4 LNB type This field is not displayed if you have selected SMATV at the Antenna Configuration field According to your LNB select Universal Customized or None Installation Low and High frequencies These fields are only displayed if you have selected Customized at the LNB type field With digit keys enter Low and High
27. ned to your set top box For further information refer to your TV instruction book Make sure you point your remote control directly at your set top box and that nothing is between it and your set top box The ir receive light on your set top box s front panel should flash each time you press a remote control button If not press SAT key on your Remote control Check the batteries and replace them if necessary Specification Problem Possible cause You ve forgotten your PIN The menus and banners are in a language you don t understand The menu language has been changed to a language you don t understand Your decoder doesn t Your RCU might be react when you press configurated for a key of the RCU DVD VCR or TV the Red devices led on the front panel doesn t blink Specification Due to continued product improvement this specification may change without notice Suggested solution Call customer support for advice You can change the menu language as follows 1 From a digital satellite channel press MENU 2 Press W 3 times to highlight the Preferences item on the menu then press OK 3 Press OK The Preferences menu displays The first highlighted item is the language item press OK 4 Press gt until your language displays 5 Press BACK The menus should now be in your preferred language 6 Press EXIT to redisplay digital satellite TV Press SAT key on the RCU General
28. r remote control enter the new receiver PIN code With digit numbers keys enter again the new Receiver PIN code for confirmation Validate with OK a screen inform you that the modification is completed Press EXIT to exit the menu or press BACK to return to Parental Control menu Other settings Configuration This menu allows you to perform subsequent Channels Installation to set TV VCR settings to your personal preferences to set your Local time zone and to set your Modem configuration Select Configuration in the Main menu and press OK Configuration menu is displayed and Channels Installation field is highlighted Ph T7RONG DIGITAL TV Configuration Channels Installation INOR Configuration J Press OK to access Channels Installation menu To access this menu Receiver PIN code may be requested Channels Installation Once you have accessed the menu Antenna Configuration field is selected OTRONG DIGITAL TV Channels Installation Antenna Configuration Channels Search ISTE Select your option with navigation Navigate validate Bad Press OK to access the menu 29 Other settings Antenna Configuration menu is displayed STRONG DIGITAL TV Antenna Configuration ENB Sirius 516 Refer to chapter First installation page 14 for more information on this menu Channels search select Channels Search field and press OK
29. rectly to record at the appropriate time making sure your VCR is set to record its appropriate AV channel For further information about your VCR refer to your VCR s User Guide EJ Notes Your VCR must be correctly connected to your set top box For further information see page 9 Some programs are copy protected and may not play back correctly if you record them While you are setting the recording up you may wish to make sure your TV is switched to the AV channel that you use when you are watching videos so you can check that the VCR is showing what you want to record Watching other channels while you are recording a digital satellite program You can watch any terrestrial channel while you record digital satellite TV by changing channel with your TV s remote control You can also watch any digital channel while you record a terrestrial channel However you cannot watch one digital channel while you record a different digital channel If you use your set top box s remote control to change channel while you are recording your VCR will record the channel change Teletext access From a TV service which provide teletext magazine press TEXT button on your remote control unit to display teletext magazine Using digit number buttons you can key in a specific Teletext page You can navigate within the teletext pages using navigation keys A Display the precedent Teletext page v Display the next Teletext page The use of the colore
30. satelitte dish to the satellite input connector on your set top box Connecting to the telephone line Supplied with your set top box are telephone line adapters suitable for your region Adapter for Sweden adapter for Denmark adapter for Norway Finland and Estonia If your telephone wall socket looks like the one shown right you do not need an adapter but you may need a splitter not supplied so that Ol you can plug in both your set top box and your telephone 1 Remove your telephone connector from your telephone wall socket 2 Choose the correct adapter for your location If you are not sure which one to use compare with your telephone connector Insert your telephone connector into the correct socket on your adapter 4 Take the free end of your supplied telephone lead and insert it into the correct socket on the adapter as shown right 5 Insert the adapter into your telephone wall socket Installation Inserting your smart card 1 Take your smart card from its packaging if you have not already done so and hold it so that the picture is facing upwards with the arrow pointing towards your set top box and the smart patch is facing downwards and at the end away from you 2 Insert the smart card into the smart card slot of the front panel of your set top box Insert it as far as it will go without forcing it Taking care of your smart card Do not remove and re insert your smart card unnecessari
31. t bands oscillator frequencies Satellite This field is not displayed if you have selected SMATV at the Antenna Configuration field or None at the LNB type field Select the satellite on which one your antenna is pointed Checking the signal Once antenna settings are set the signal check screen is displayed Use this screen to confirm that your set top box is receiving a satellite signal EN OTRONG DIGITAL TV Antenna System Adjust Exc Adjust your antenna with poweer quality indication Navigate 6 Back The details on the screen show the name of the satellite together with bars showing the power and quality of the signal being recived from this satellite If you have selected DiSEqC at the Antenna Configuration menu you can select a satellite from its LNB index Your set top box must receive both a signal strength and a signal quality of at least 6076 in order to successfully find channels When you are satisfied that there is an adequate signal press OK Note If you press OK before you are ready you can press BACK to redisplay the signal check screen Installation Once you have confirmed the satellite signal strength the Channels Search menu is displayed Channels Search menu P 7RONG DIGITALTV Modify parameters withinavigation keys Navigate Validate Back The default parameters allow you to install all the Viasat Channels If yo
32. u want to do a specific installation use a specialized satellite magazine to get the correct figures for following settings frequency MHz Polarization Symbol rate and FEC fields are not available if you select Fast scanning or Manual scanning at Installation Type field Installation type Depending on the desired installation select Network to install a pre defined network Bouquet to install a pre defined network Transport to install a pre defined transponder Fast scanning to install a predefined list of frequencies on a dedicated satellite Manual scanning to scan al the frequencies on a dedicated satellite If you have selected SMATV at Antenna configuration menu only Manual scanning is available Satellite This field can only be selected if you have selected DiSEqC at the Antenna Configuration menu Choose a satellite from its LNB index Frequency MHz With digit buttons of your remote control enter the frequency of the desired transponder Polarization According to the transponder polarity select Vertical or Horizontal Symbol rate With digit buttons of your remote control enter the correct symbol rate Installation FEC According to the selected transponder select correct FEC Bouquet number This field is only available if you have selected Bouquet at Installation Type field With digit buttons enter the number of the desired bouquet If you have selected Manual scannin
Download Pdf Manuals
Related Search