ED2 Operator Guide
Contents
1. ED2 SkidWeigh FreightWeigh Series User s Manual Vehicle operator Weighing Procedure Standard System 1 Insert the forks into the pallet load or under the product to be weighed Lower the loaded forks to the ground To initiate the weighing cycle number 8 must be shown in Mode digit of the LED display 2 Activate the lift control vale quickly by lifting the load just above the ground 3 For weighing readout to be within 1 of vehicle lifting capacity don t lift the loaded forks slowly don t use tilt control or start to lift loaded forks to different heights during the weighing cycle As soon as the load has been lifted LED digital display will go blank for a moment and load weight will be displayed within five seconds This load weight will be shown on the LED display until next time the forks are lowered to the ground For system with hydraulic accumulator about 10 seconds Software V 96 Accumulative Load Weight Function Operator input required LEFT BUTTON Black Accumulative function Every time LED display shows the load weight and if you want to use accumulative total load weight function press Left BLACK button The current load weight value will be added into a weighing counter RIGHT BUTTON Red Reset and print function Every time LED display shows a current or total accumulative load weight and the Right RED button is pressed the weighing counter will be2. e on various ED2 SkidWeigh models Integrated Visual Data Technology Inc
3. reset If the onboard printer is connected the load weight ticket will be printed Overload Warning Function No operator input required When pre set overload load weight is lifted LED display will show the value and all digits will Flash Systems equipped with external visual audio devices will be activated Optional wireless web based system will record and report the event To stop LED display Flashing and turn off external warning devices lower the load to the ground ED2 Operator User Guide V1 2 Note Optional functions are available on various ED2 SkidWeigh models Integrated Visual Data Technology Inc Two Weighing Channels Operator input required Mode 8 is indicating first weighing channel and Mode 82 second Press External Switch External Zero Weight Re calibration Function Operator input Lower the empty forks or any attachment to the ground LED display will show Mode 8 Press external switch and Mode 8 will change to Mode 0 Lift the empty forks just above the ground After few second LED display will show 00000 and will blink 3 times Lower the forks to the ground New zero weight will be stored in the memory ai Excessive Engine Idling Visual Warning No operator input When pre set allowed engine idle time Adjustable time from 1 to 999 seconds is exceeded LED display will show all Os digits and they will Flash Systems equipped with external visual audio devices
4. will be activated Optional wireless web based system will record and report the event System is available with operator pre warning time out value shown on LED display in the seconds To stop LED display Flashing and turn off external warning devices turn ignition switch off to reset the system Under Utilization Visual Warning No operator input Every time the pre set under utilization factor is reached LED display will show all O s digits and they will Flash Systems equipped with external visual audio devices will be activated Optional wireless web based system will record and report the event System is available with operator pre warning time out value shown on LED display in the seconds To stop LED display Flashing and turn off external warning devices turn ignition switch off to reset the system Impact Detection Visual Warning No operator input Every time the pre set impact detection is reached LED display will show all O s digits and they will Flash Systems equipped with external visual audio devices will be activated Optional wireless web based system will record and report the event System is available with time delay relay activation when impact detected Time delay value is shown on LED display in the seconds To stop LED display Flashing and turn off external warning devices turn ignition switch off to reset the system ED2 Operator User Guide V1 2 Note Optional functions are availabl
Download Pdf Manuals
Related Search