20150921-GC1 User Manual-B5
Contents
1. 3 Green light Device on when lit off when extinguished Precautions The time stamp function is disabled when Wi Fi is on This device has loop recording and file lock down functions locked files cannot be overwritten unless using connection via an external device such as a mobile phone This device has IPX6 waterproof ratings but is not designed to submerge underwater Do not disassemble the device all warranty will be invalid if the device has been disassembled If installed on the negative terminal of the vehicle be sure that the said terminal is connected to the battery s negative terminal The red wire is positive electricity it must be connect to a positive electricity controlled by the ignition switch which means when the ignition switch is turned to ACC the white light on the control panel will also be lit and will enter recording mode After all the wires are fixed in position be sure the steering of the handlebars will not implicate the wires The USB port of the power box can supply a 5V 2A power output to provide charging for phones or tablets please be aware that when the rubber cap is off the device cannot sustain any water and please leave the cap on when not using the USB port When installing the power box place face the opening of the USB port downwards and be careful of any water that may get in You can use Micro USB to connect the device to a computer and use as an external storage d2. MOTO CAM User Manual LTA A l Wiring Diagram iti j ower DOX Ignition Switch Power USB Port i P 8 Main Device ea Fasten Points Control Panel Record Light Wi Fi Light Power Light Wi Fi Button lt gt Power Button Adjustable Lens Micro USB Port P 9 Installation Diagram 1 Place the 3M VHB tape onto the Metallic mount 2 Stick the silica gel patches between the mount and the joints then screw in the screws 3 Stick the silica gel patches between the main device and the joints then screw in the screws 4 Make sure to clean the surface of where you want to install the mount to and rip off the other side of the 3M tape and stick it to the said surface and press for at least 5 seconds when applying the mount 5 Adjust the main device and the joint to desired positions then screw down the screws tight 6 If the surface you are installing to is curved please bend the mount to fit the surface 3M VHB Tape Metallic Mount Silica Gel Patches x 4 pcs Fine Thread Hex Head Screw x 2 pcs Coarse Thread Hex Head Screw x 2 pcs Metallic Joint x 2 pcs Main Device MOTO CAM User Manual Operating Instructions Establishing Wi Fi Connection 1 Button Descriptions 1 Mobile APP Installation i Power button Press once to turn power on off Hold down 5 i iPhone Search for Action Cam HD on the Apple s App store second
3. evice but please be aware that when the rubber cap is off the device cannot sustain any water and please leave the cap on when not using the USB port 30500198300C
4. s for forced shutdown ii Android 5 Search for Action Cam HD on Google play ii Wi Fi button Press once to turn Wi Fi on off Hold down 10 iii Android 4 Download Action Cam HD Android 4 app as seconds for restoring to factory settings http www foxeye cam com doc 809FhP apk only works while recording Hold down for 3 seconds to 3 Press the Wi Fi button on the control panel the recording will be start end recording 2 When the ignition switch is turned to ACC the device is booted up and will enter recording mode in about 5 seconds 4 3 When the ignition switch is turned to OFF the current recording file is automatically saved and the device will proceed to shut down 4 Wi Fi is off by default start up time requires 15 seconds 5 When Wi Fi is enabled the APP can be used to connect to the Formating Internal Memory device to download view edit the files and give access to interrupted shortly and when the Wi Fi indicator light is lit the recording will resume Find GC1_xxxxxx in the Wi Fi listings on your mobile device enter the default password 00000000 and select to connect 5 Boot up the Foxeye Wi Fi App and proceed to use the app camera settings 1 After the devices has booted please turn off Wi Fi and the 6 The Foxeye Wi Fi APP supports both the iOS and the Android recording function systems 2 Press and hold both the Wi Fi and recording button for about 10 seconds the blue and red light
5. will start to cross blinking to The microphone operation instrucion is as followed indicate the formatting process has started 1 The microphone is defaulted as on every time the device is 3 All lights will extinguish to indicate the formatting has been booted up successful 2 During recording mode 4 Formatting will wipe out all files in the memory including the A Stop recording short press the power button once the power locked files please back up all the files you wish to keep light will blink twice start recording the sound will be muted before commencing to format B Stop recording short press the power button once the power light will blink once start recording the sound will be unmuted A Short press the power button once the power light will blink twice the sound will be muted Press power button 20 seconds to reset the system if control panel B Short press the power button once the power light will blink LED lights are unstable recording red light can t turn on or off once the sound will be unmuted power green light can t turn on etc Light Indicators Restore to Factory Settings 1 Red light 1 Make sure the device is not recording and the Wi Fi is off Recording when lit Stops recording when extinguished 2 Hold down the WI FI button on the control panel for 10 2 Blue light seconds the device will automatically reboot and is restored to Wi Fi on when lit Wi Fi off when extinguished factory settings
Download Pdf Manuals
Related Search