User manual - COMM-TEC
Contents
1. Controlling the Display from the Source Location 1 Connect the 3 5mm mini mono connector from the IR In port on the Sender unit to the automation system 2 Connect the included IR emitter from the IR Out jack on the Receiver unit to the IR sensor on the display from Automation System to IR In port Sender unit CAT 5e CAT 6 HDMI cable to Hi Def source Receiver unit HDMI cable Ultra HD Display IR emitter IR signals page 12 03 Appendix eee a E Wall Mounting Instructions on Specifications e RIEN TET RET enn Appendix Network Cable Diagram Front of RJ 45 Connector 12345678 Gefen recommends the TIA EIA 568 B wiring option Use the table below when field terminating cable for use with Gefen products Pin Color Description 1 Orange White TD Transmit Data positive differential signal 2 Orange TD Transmit Data negative differential signal 3 Green White RD Receive Data positive differential signal 4 Blue Unused 5 Blue White Unused 6 Green RD Receive Data negative differential signal 7 Brown White Unused 8 Brown White Unused Shielded STP CAT 5 or CAT 6 is recommended However unshielded UTP CAT 5 or CAT 6 is acceptable CAT 5 CAT 5e and CAT 6 cabling comes in stranded and solid core types Gefen recommends using solid core cabling CAT 6 cable is2. Gefen s got it O 20600 Nordhoff St Chatsworth CA 91311 1 800 545 6900 818 772 9100 fax 818 772 9120 www gefentoolbox com support gefentoolbox com 6 amp e This product uses UL listed or CE compliant power supplies 40
3. HDMI port on the Sender unit 2 Connect an Ultra HD display to the HDMI port on the Receiver unit using another HDMI cable 3 Connect a CAT 6 cable from the Link jack on the Sender unit to the Link jack on the Receiver unit gt Ultra HD 4K x 2K up to 170 feet 52 meters using CAT 6 up to 130 feet 40 meters using CAT 5e HDMI and 3DTV up to 230 feet 70 meters using CAT 6 up to 198 feet 60 meters using CAT 5e NOTE If terminating network cables in the field please adhere to the TIA EIA568B specification See Network Cable Diagram for details 4 Connect the included 24V DC power supply to the Sender unit and plug the AC power cord into an available electrical outlet Power to the Receiver unit is delivered from the Sender unit over the CAT 5e CAT 6 cable using Gefen POL technology 5 Forinformation on using IR control see IR Control Sample Wiring Diagram CAT 5e CABLE EEE IGEFEN CABLE an TOOLBOX Automation System 43 Hi Def Source Receiver Sender IR Extender IR Emitter HD Display GTB HDBT POL page 6 Operating the Extender for HDMI w POL Power LED Indicator IR GC ON 0 Controlling the Source the Display 11 Controlling the Display from the Source Location Power LED Indicator The Power LED indicator on the Sender and Receiver unit prov
4. ULTRA User Manual Release A7 Extender for HDMI w POL Important Safety Information 10 11 12 13 14 15 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this product near water Clean only with a dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install or place this product near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer To reduce the risk of electric shock and or damage to this product never handle or touch this unit or power cord if your hands are wet or damp Do not expose this product to rain or moisture Unplug this apparatus during lightnin
5. also recommended It is recommended to use one continuous run from one end to the other Patch cable is not recommended page 16 Appendix Wall Mounting Instructions The GefenToolbox Extender for HDMI w POL should be mounted vertically on a wall or inside outside a cabinet with wood drywall screws as shown in the diagram above There should be an inch or two of clearance between the edges of the unit and any walls or vertical surfaces to allow for enough clearance for connection and disconnection of the HDMI cable For installation on a drywall surface use a 6 drywall screw When installing it is recommended to use the center hole on a stud page 17 Appendix Specifications 1080p Full HD 4K x 2K Ultra HD 7 1 channel LPCM Dolby amp TrueHD DTS HD Master Audio 300 MHz 300 MHz 1x LED multicolor blue amber Maximum Pixel Clock Maximum TMDS Clock Power HDCP Indicator Video Input 1 X HDMI 19 pin female locking Video Output 1x HDMI Type A 19 pin female locking Link Sender Receiver 1 x RJ 45 shielded IR Extender Receiver 1 x 3 5mm mini stereo IR Out Sender Receiver 1 x 3 5mm mini mono IR In Sender 1 x 3 5mm mini mono Power Consumption 24W max Dimensions W x H x D 4 3 x 1 x 3 27 110mm x 26mm x 80mm Unit Weight Sender Receiver 0 33 Ibs 0 15 kg page 18 Stretch it Switch it Split it
6. g storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Batteries that may be included with this product and or accessories should never be exposed to open flame or excessive heat Always dispose of used batteries according to the instructions Warranty Information Gefen warrants the equipment it manufactures to be free from defects in material and workmanship If equipment fails because of such defects and Gefen is notified within two 2 years from the date of shipment Gefen will at its option repair or replace the equipment provided that the equipment has not been subjected to mechanical electrical or other abuse or modifications Equipment that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair Such repairs are warranted for ninety 90 days from the day of reshipment to the Buyer This warranty is in lieu of all other warranties expressed or implied including without limitation any implied warranty or merchantability or fitness for any particular purpose all of which are expressly disclaimed 1 Proof of sale may be re
7. ides basic information on the current status of the Extender for HDMI w POL LED Status Description Power Solid blue Power connected to Sender unit Off No power supplied to the Sender Receiver unit Make sure the power supply is connected to the Sender unit Make sure that the outlet is live If the Sender unit LED is illuminated and Receiver unit LED is off inspect the CAT 5e CAT 6 cable between the Sender and Receiver unit Flashing blue 1 Non HDCP content is being and amber o E transmitted from the source device 224 e page 10 Operating the Extender for HDMI w POL IR Control The Bi Directional IR feature allows two methods of control Use the included IR extender to control the source device from the viewing location or an automation system to control the display or other sink device from the source location Refer to the user documentation that came with your automation system for details Controlling the Source from the Display Location 1 Connect the included IR extender to the IR Ext jack on the Receiver unit 2 Connect the included IR emitter from the IR Out jack on the Sender unit to the IR sensor on the source device HDMI cable to Ultra HD display Receiver unit CAT 5e CAT 6 IR Extender Sender unit IR emitter signals page 11 Operating the Extender for HDMI w POL IR Control
8. ontrol vii Extender for HDMI w POL Table of Contents 01 02 03 Getting Started Sender Unit Layout 2 greed E 2 wenn 3 Receiver Unit Layout een een 4 FROM A AA rinnen 4 A 5 installation c rto tet re ee Connecting the Extender for HDMI w POL Sample Wiring Diagram Operating the Extender for w POL Power LED Indicator 2 10 IR Control tirer retro rri 11 Controlling the Source from the Display Location 4 11 Controlling the Display from the Source 12 Appendix Network Cable Diagramm 16 Wall Mounting Instructions euo acto anne paca 17 SPOCiCAUONS uo 18 viii 01 Getting Started Sender Umit layout eee eR Front Connecting the Extender for HDMI w POL A es oer DET Getting Started Sender Unit Layout Front Name Description IR Out Connect the included single infrared IR emitter from this jack to the IR sensor window of the source Link Connect a CAT 5e CAT 6 cable from this port to the Receiver unit page 2 Getting Started Name 24V DC Power HDMI IR In Sender Unit Layou
9. quired in order to claim warranty 2 Customers outside the US are responsible for shipping charges to and from Gefen 3 Copper cables are limited to a 30 day warranty and cables must be in their original condition The information in this manual has been carefully checked and is believed to be accurate However Gefen assumes no responsibility for any inaccuracies that may be contained in this manual In no event will Gefen be liable for direct indirect special incidental or consequential damages resulting from any defect or omission in this manual even if advised of the possibility of such damages The technical information contained herein regarding the features and specifications is subject to change without notice For the latest warranty coverage information refer to the Warranty and Return Policy under the Support section of the Gefen Web site at www gefen com PRODUCT REGISTRATION Please register your product online by visiting the Register Product page under the Support section of the Gefen Web site Contacting Gefen Technical Support Gefen LLC c o Customer Service 20600 Nordhoff St Chatsworth CA 91311 Telephone 818 772 9100 800 545 6900 Fax 818 772 9120 Email support gefen com Visit us on the Web www gefen com gefentoolbox Technical Support Hours 8 00 AM 5 00 PM Monday Friday Pacific Time Extender for HDMI w POL is a trademark of Gefen LLC Important Notice Gefen LLC reserves the right
10. r a single CAT 6 cable or up to 198 feet 60 meters over CAT 5e Extends 4K Ultra HD 3840 x 2160 30 Hz and Bi Directional IR up to 130 feet 40 meters over a single CAT 5e or CAT 6 cable Supported features HDCP compliant 12 bit Deep Color LPCM 7 1 audio Dolby TrueHD and DTS HD Master Audio pass through 3DTV pass through CEC pass through Y Lip Sync pass through IR extension from Sender to Receiver and from Receiver to Sender Gefen POL feature provides power to the Receiver unit over the link cable Uses Gefen s implementation of HDBaseT technology EDID pass through Locking power connector Surface mountable HIGH DEFINITION MULTIMEDIA INTERFACE PROGRESSIVE 22 Homi 1080P x ULTRA AD vi Extender for HDMI w POL Features and Packing List Packing List The Extender for HDMI w POL ships with the items listed below If any of these items are not present in your box when you first open it immediately contact your dealer or Gefen 1 x Extender for HDMI w POL Sender unit 1 x Extender for HDMI w POL Receiver unit 1x6 ft Locking HDMI cable 1 x IR emitter 1 IR extender 1 x 24V DC Locking Power Supply 1 x Quick Start Guide NOTE The Extender for HDMI w POL ships with one IR emitter However depending upon the application a secondary IR emitter may need to be purchased See IR Control for more information on using IR c
11. t Back Description Connect the included 24V DC power supply to this connector and plug the AC power cord into an available electrical outlet Only use the power supply shipped with this unit This LED will turn on once the included 24V DC power supply has been connected See Power LED Indicator for more information on using the LED indicator Connect an Ultra HD source to this port using the included locking HDMI cable Connect a mini mono 3 5mm cable from this jack to the output of an automation system w electrical IR output page 3 Getting Started Receiver Unit Layout Front ID Name Description 1 IR Out Connect an IR emitter Gefen part no EXT IREMIT from this jack to the IR sensor window of the source 2 Link Connect a CAT 5e CAT 6 cable from this port to the Sender unit page 4 Getting Started Receiver Unit Layout Back Name Power HDMI IR Ext Description This LED will turn on once the included 24V DC power supply has been connected to the Sender unit and a CAT 5e CAT 6 cable is connected between the Sender and Receiver unit See Power LED Indicator for more information on using the LED indicator Connect an Ultra HD display to this port using an HDMI cable Connect the included IR extender to this jack page 5 Getting Started Installation Connecting the Extender for HDMI w POL 1 Connect the included HDMI cable between the Ultra HD source and the
12. to make changes in the hardware packaging and any accompanying documentation without prior written notice HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing in the United States and other countries 2014 Gefen LLC All Rights Reserved Alltrademarks are the property of their respective owners iv Operating Notes CAT 5e cables should not exceed 198 feet 60 meters CAT 6 cables should not exceed 230 feet 70 meters Shielded STP CAT 5e CAT 6 is recommended However unshielded UTP CAT 5 or CAT 6 is acceptable depending on cable quality but is not the top choice Care should always be given to keep these cables away from power lines and other electromagnetic interference sources e NOTE Shielded cable has an advantage by providing immunity to Electromagnetic Interference EMI from cell phones and A C motors This product is Ultra HD 4K x 2K compliant 4K x 2K resolutions can be extended up to 130 feet 40 meters over a CAT 5e or CAT 6 cable POL Power Over Line technology from Gefen sends power to the Receiver unit over the same CAT 5e CAT 6 cable that is used for extending the HDMI signal HDBaseT technology allows HDMI IR Bi directional and power to be sent over one CAT 5e CAT 6 cable Features and Packing List Features Extends HDMI at 1080p Full HD and Bi Directional IR up to 230 feet 70 meters ove
Download Pdf Manuals
Related Search