T400 Series loader instructions
Contents
1. NE ZH 19 rue de Rennes BP 83221 F 35690 ACIGN 22 Modification reserved 14 SHOCK ELIMINATOR SYSTEM Shocks are eliminated when moving the loader or when it stops suddenly when being lowered option This system softens jolting on the tractor and therefore jarring in the cab The Shock Eliminator can be isolated using the valve Without SHOCK ELIMINATOR The Shock Eliminator can be enabled or disabled directly from the cab 15 CROWD SYSTEM SPEED RESTRICTOR The crowd speed restrictor option is located at the bottom of the 3rd service solenoid valve inside the R H loader arm 15 1 ON OFF ON restrictor is activated Crowd system has low speed OFF restrictor is not activated Crowd system operates normal speed 15 2 Adjustment Place lever in position ON Un tighten nut A Adjust crowd system speed with screw B Re tighten nut A Check speed after adjustment ML ZW 19 rue de Rennes BP 83221 F 35690 ACIGN 23 With SHOCK ELIMINATOR Modification reserved The automatic upgrade of the ACS tool option is available for loaders that are controlled by the original control valve of the tractor or the MX Flexpilot or Techpilot control valves 16 1 Adjustment of implement position The setting of the implement positon is made with the implement level indicator rod See diagram Place implement2. Familiarise yourself with the safety rules in the user manual before using or working on the loader Follow the loader hitching and unhitching procedure given in the user manual Y Use the anchoring points when handling the loader Handling above people is prohibited It is prohibited to use the loader and its implements for any other purposes than handling the materials it was designed for ML 7 19 rue de Rennes BP 83221 F 35690 ACIGN 7 Modification reserved 3 IDENTIFICATION PLATE The identification plate is located inside the LH arm next to the implement level indicator MX 7 CE 19 rue de Rennes F 35690 ACIGNE D signation Designation Type Model Typ N de s rie Seriennummer ANNE Poids vide k Unloaded weight Leergewicht g 328462 The serial number and loader type which are indicated on this plate might be requested when requiring spare parts or technical assistance 4 COUNTERWEIGHT The stability of the tractor and loader can only be ensured with a counterweight on the rear of the tractor This counterweight must ensure that a minimun of 20 of the total weight Tractor loader implement maximum load and counterweight is applied on the back axle of the tractor in order to work in a safe condition Below is the calculation method which indicates the required counterweight M standard EN12525 A2
3. the status on off or enabled disabled of the safety device must be clearly indicated and clearly visible from the driver s cab and from the loading area In compliance with 7 1 2 the correct operating method must be explained including the warnings in the instruction manual The loader must be fitted with a warning informing that for lifting operations requiring the presence of someone near the load when the loader is in raised position the safety device must be in the on position actuated see 7 2 Information for using front loaders that are not designed for lifting operations requiring the presence of an operator near the load when the loader is in raised position must comply with 7 1 4 and 7 2 Annex E normative Test method and acceptance criteria for means to avoid unintended lowering E 1 Terms and definitions E 1 1 discharge device hydraulic valves used to simulate a rupture of the loader s hydraulic piping E 1 2 test load weight 50 10 of nominal lifting capacity specified by the manufacturer of the loader E 2 Test procedure The test specified from E 2 1 to E 2 2 must be carried out according to each of the following conditions position held after lowering the test load to a height of 1 0 1 m static test position held after lifting the test load to a height of 1 0 1 m static test and at oil temperatures of the hydraulic system between 40 C and 50 C E 2 1 The discharge device betw
4. MIX 7 LOADER MX 1406 MX 1408 MX 1410 MX 1412 MX 1417 MX 1418 User manual Please read carefully before using MX loader Original instructions Dear users Thanks you for confidence in our product We are sure it will give you full satisfaction By taking a few minutes to read this manual you will be able to obtain the best results from your MX loader extend its lifespan and work in complete safety The loader user manual is a very important document please keep it with you in order to be able to use it if required Leave it available to any other user and give it to the next owner of this loader Pictures and technical information included in this document may not correspond precisely to your loader but the working conditions will be the same A The loader should be subject to handover from the dealer to the user The demonstration of the equipment to be delivered should include The safety rules Hitching and unhitching the loader Hitching and unhitching the work implement Full use of the controls In the event that one of these four necessary items is omitted you should immediately contact your dealership E SS de a DegP meek O 12 13 14 19 16 17 18 19 20 21 22 CONTENTS SAFETY INSTRUCTIONS SAFETY STICKERS IDENTIFICATION PLATE COUNTERWEIGHT LOADER UNHITCHING ATTELAGE DU CHARGEUR IMPLEMENT UNHITCHING IMPLEMENT HITCHING IMPLEMENT CARRIER FRAME M
5. are forbiden Such work should be carried out by a specialist vehicle and is not possible for an agricultural loader Use the tractor s power to enter in the material to be moved rather than approaching it with speed which will generate high stress on tractor and loader When the load to be manoeuvred is too heavy do not apply force to the hydraulic components This also applies when rams are fully closed or extended Please release the control lever When ground levelling work at a slow speed with the implement at a maximum angle of 50 with respect to the ground Operate with flexibility and in a judicious manner YY 19 rue de Rennes BP 83221 F 35690 ACIGN 29 Modification reserved 21 CONTROL Important Never leave the tractor with loader in raised position All spool valves produce an internal leak required for correct operation 21 1 On tractor valves Please report to the tractor s instruction book 21 1 1 Front rear control selector option From the original joystick of the tractor the operator can control the MX loader or the rear couplers from the cab 21 2 Control with MX PROPILOT control valve 21 2 1 Handle setting To ensure comfortable control over the loader you can set the position of the handle on Propilot and Flexpilot controls only ML ZW 19 rue de Rennes BP 83221 F 35690 ACIGN 30 Front rear control selector option Modifica
6. check the information regarding the counterweight in this user manual Restrict all movements while the load is lifted as the tractor may become unbalanced The maximum front axle safe load provided by the tractor s manufacturer must not be exceeded The maximum front tyres safe load provided by the tyres s manufacturer must not be exceeded Check regularly tyres pressure Regularly check the presence of safety pins and bolts Do not replace with any other object such as nails wire etc Hitch the loader only to a tractor fitted with a roll over protective structure ROPS or a falling object protective structure FOPS This should be in the protective position when using the loader Watch out for overhead electrical and telephone cables when manoeuvring with the loader in the raised position In compliance with the standard EN 12525 the controls for operating the loader and implements must be of the sustained action type with the exception of the lift floating position which can be maintained in its position by a notching system Any activity relating to defect investigation diagnosis and or disassembly of parts may only be undertaken by an accredited professional who shall assure his safety and the protection of the environment in which the actvity is conducted in particular in the event of an activity involving the loader staying in the lifted position A CAUTION The loader s hydraulic circuit is designed to have a maximum
7. in position Lay implement down on the ground Unscrew the screw Place rod end in front of the sensor O Tighten screw again O 16 2 Automatic implement position return Flexpilot control The ACS operates in the crowding direction Implement in dumped position press and hold the black button 1 of the joystick implement stops automatically when preset position is reached Release the black button 1 Techpilot control ACS works both ways crowding and dumping If implement stays in dumped position loader will crowd lf implement stays in crowded position loader will dump Press and hold the black button 1 on the joystick implement stops automatically when preset position is reached Release the black button 1 Using the factory fitted control valve on the tractor The ACS operates in the crowding direction When the tool is dumped press and hold the ACS function button on the loader control lever and crowd left hand lever the tool automatically stops at the pre set position Release the button and bring the lever into neutral Please refer to the electrical wiring harness assembly instructions NE Y 19 rue de Rennes BP 83221 F 35690 ACIGN 24 Modificationr served Synchronisation bucket grab option works both ways Grab opening bucket dumping Bucket crowding grab closing SCS works only when loader has 3rd funct
8. locking indicator is in the red zone NE ZH 19 rue de Rennes BP 83221 F 35690 ACIGN 11 Modification reserved Return to the driver s cab ver MEM MX T400 loaders MX T400s loaders Check on the left and right hitching frames that the locking MXT400 loaders _ 2 Jj indicators are in the red zone FIROCK 4 Reverse the tractor first with a rapid movement then more slowly until the loader rests on its stands Check the loader s stability HEN MISC x 19 rue de Rennes BP 83221 F 35690 ACIGNE 12 Modification reserved 6 ATTE LAG E DU CHARG EU R fa You will also find a video showing the unhitching hitching on www m x eu Check on the L H R H side beams that the locking indicators are in the red area and that no object will obstruct the loader hitching The bracket are designed with a roller and a ramp which will lift the loader when hitching Drive the tractor forward in order to guide the loader frame on to the brackets until the catches are automatically triggered The loader is locked when indicators are in the green area If the indicators are still in the red zone refer to the Two step hitching section Connect the hydraulic s and electric s Loader with MACH System Hold the housing with two hands and using the back of the housing lift the valve cover and fit the guide bars vertically into place NE ZH 19 rue de Rennes BP 8
9. m 1 87 m 2 05 m 2 05 m Minimum weight Without option MX T400 loaders 460 Kg 480 Kg 535 Kg 550 Kg 720 Kg 757 Kg Maximum weight With option MX T400 loaders 505 Kg 560 Kg 615 Kg 635 Kg 867 Kg 904 Kg Minimum weight Without option MX T400s loaders 522 Kg 542 Kg 597 Kg 612 Kg 782 Kg Maximum weight With option MX T400s loaders 567 Kg 622 Kg 677 Kg 697 Kg 929 Kg Maximum height at implement pivot 3 75 m 3 85 m 4 00 m 4 15m 4 60 m 4 60 m Maximum height under horizontal bucket 1 3 50 m 3 60 m 3 75 m 3 90 m 4 35 m 4 35 m Maximum height under dumped bucket 2 2 95 m 3 05 m 3 20 m 3 35 m 3 80 m 3 80 m Digging depth 3 0 20 m 0 20 m 0 20 m 0 20 m 0 20 m 0 20 m Dumping angle at maximum height 4 520 55 55 55 50 50 Crowd angle 5 47 52 52 52 51 51 Lift force at implement pivo Kg 1600 Kg 2100 Kg 2400 Kg 2720 Kg 3000 Kg 3000 Kg Lift capacity at implement pivot over the entire lifting range Kg 1250 Kg 1890 Kg 2190 Kg 2490 Kg 2670 Kg 2670 Kg Payload on pallet 0 60 m in front of the forks At ground level Kg Without PCH 1150 Kg 1350 Kg 1580 Kg 1770 Kg 1930 Kg 1930 Kg With PCH 1450 Kg 1800 Kg 2080 Kg 2360 Kg 2660 Kg 2660 Kg At 2 m height Kg Without PCH 1000 Kg 1300 Kg 1540 Kg 1750 Kg 1890 Kg 1890 Kg With PCH 1380 Kg 1720 Kg 2000 Kg 2250 Kg 2560 Kg 2560 Kg At 3 m height Kg Without PCH 900 Kg 1200 Kg 1470 Kg 1690 Kg 1850 Kg 1850 Kg With PCH 1350 Kg 1630 Kg 1980 Kg 2230 Kg 2460 Kg 2460 Kg At maximum height
10. the locks are in the open position to allow the implement s parts to pass Move the loader along the axis of the implement Drive the implement carrier into the implement Gently crowd and raise the loader to lift the implement from the ground Press the green and orange buttons by moving the crowd lever to the left crowd The implement is now locked NOTE If the implement has one or more hydraulic functions connect the hoses 8 3 SPEED LINK 2 implement frame carrier Before connecting an implement take care that the pins are in the open position The locking indicator at the back of the Speed Link 2 frame is red Drive the implement carrier into the implement gently crowd and raise the loader to lift the implement from the ground Press the green and orange buttons while moving the crowd lever to the left crowd The implement is now locked The locking indicator is green NOTE Using an implement which has no Speed Link 2 plug but has one D A hydraulic service is possible If required plug the couplings at the back of the Speed Link 2 frame once the 3rd function circuit pressure has been released A Checking before work Press on the ground to check if implement is correctly locked on the loader Use D A mode Manoeuvre each hydraulic service to its maximum in each direction to check the correct operation of the hydraulic system and that there are no leaks NE Y 19 rue de Rennes
11. 2010 5Nb 12 P N 5G 5 11 12 I2 G Weight on the rear axle wihtout counterweight with an empty implement kg G1 Weight on the front axle without counterweight with an empty implement kg b Distance from the front axle to the implement centre of gravity mm 1 Distance from rear linkage pins to the rear axle mm 12 Wheelbase N Usable load of the loader for implement pivot point A horizontal with the loader pivot point B kg P G G1 kg M Weight of the counterweight kg MISC q e 19 rue de Rennes BP 83221 e F 35690 ACIGN 8 Modification reserved D LOADE H U N H ITCH NG N You will also find a video showing the unhitching hitching on www m x eu This operation must be carried out by the driver who must leave the seat and ensure all manoeuvres are forbidden while he is working on the loader The loader must always be coupled to an implement to unhitch it Choose a flat and stable area Lower the loader with double acting in order to slightly lift the front axle of the tractor with the implement horizontal to the ground Actuate in notched floating position then back to neutral The lift rams will be filled both sides with oil and involuntary movements of the loader will be limited when the loader has prolonged exposure to the sun and will ensure the hitching is correct Pull the parking brake Turn off the engine Get out of
12. 3221 F 35690 ACIGN 13 MX T400 loaders ial MX T400s loaders f Modification reserved Loader without MACH System Remove the plastic covers on the couplings Connect the couplings Open the tap Raise and lock the right and left parking stands Check that each parking stand is correctly locked Checking before work Press on the ground with an implement to check if loader is correctly hitched on the tractor Use D A mode Two step hitching 1 Connect the hydraulic s and electric s 2 Move the lever forwards to the notched floating position Moving the tractor forward O If necessary turn the wheels 3 Operate lifting movement slightly 3 The loader is locked Indicators in the green 4 Raise and lock the right and left parking stands 5 Checking before work Press on the ground with an implement NE Y 19 rue de Rennes BP 83221 F 35690 ACIGN 14 Modification reserved 7 IMPLEMENT UNHITCHING This operation must be carried out by the driver who must leave the seat and ensure all 7 1 manoeuvres are forbidden while he is working on the loader Implement carrier with manual unlocking Select a stable parking area Lower the implement horizontally to 0 30 m from the ground Pull on the handbrake Turn off the engine Decompress the loader s hydraulic lines feeding the implement NOTA When loader fitted with one or several solenoid valves leave con
13. BP 83221 F 35690 ACIGN 18 Wadification reserved 9 IMPLEMENT CARRIER FRAME MODELS 9 1 MX Master Attach implement carrier frame 9 2 Euro implement carrier frame 9 3 MX Master Attach Euro implement carrier frame To switch from the MX Master Attach position to the Euro position Remove the pins Tilt the hitch shoes downwards Ensure that the hitch shoes are kept in position by the spring rods Put the pins back to their initial position NE ZH 19 rue de Rennes BP 83221 F 35690 ACIGN 19 Modification reserved 9 4 Euro SNS AL 3 implement carrier frame To switch from the SMS or AL 3 position to the Euro position Remove the split pins then the pins Take the hitch shoe and position it by rotating it through 180 Proceed in the same manner for the second hitch shoe 9 5 MX Master Attach Faucheux Blanc implement carrier frame To switch from the MX Master Attach position to the Faucheux Blanc position Remove the hitch shoes from their storage position Fit them in the hitching position and add the 4 attachment pins Fit the lynch pins to the attachment pins 10 IMPLEMENT LEVEL INDICATOR The implement level indicator is useful for implement repositioning Efficient even while lowering the loader it is adjustable depending on the implement type NE ZH 19 rue de Rennes BP 83221 F 35690 ACIGN 20 Modificatio
14. Kg Without PCH 860 Kg 1120 Kg 1450 Kg 1570 Kg 1750 Kg 1750 Kg With PCH 1350 Kg 1610 Kg 1960 Kg 2200 Kg 2350 Kg 2350 Kg Lifting time s 3 9 sec 4 6 sec 5 4 sec 6 2 sec 8 2 sec 8 2 sec Dumping time s 1 sec 1 sec 1 sec 1 4 sec 1 4 sec 1 4 sec Specifications measured at 190 bar and a flow rate of 60 l min Data varies depending on the type of tractor used Indicated data are with a loose material bucket Values at ground level and at implement pivot are not considered to be working data MX Y 19 rue de Rennes BP 83221 F 35690 ACIGN 33 Modification reserved NE ZH 19 rue de Rennes BP 83221 F 35690 ACIGN 34 Modification reserved DECLARATION OF CONFORMITY ce We the manufacturers MX 19 Rue de Rennes F 35690 Acigne Declare that the products MX T406 MX T408 MX T410 MX T412 MX T417 MX T418 loaders MX T406s MX T408s MX T410s MX T412s MX T417s loaders Comply with standard EN 12525 A2 2010 which presupposes compliance with the requirements of directive 2006 42 EC of the European Parliament and of the Council of 17 May 2006 on machinery Acigne the 10th of January 2013 Zz Loic Mailleux Technical Manager MX 7 19 rue de Rennes BP 83221 F 35690 ACIGNE Tel 33 0 2 99 62 52 60 Faks 33 0 2 99 62 50 22 E mail contact m x eu
15. ODELS IMPLEMENT LEVEL INDICATOR FAST LOCK SYSTEM SPEED LINK 2 SYSTEM SELF LEVELLING PCH System SHOCK ELIMINATOR SYSTEM CROWD SYSTEM SPEED RESTRICTOR ACS SCS SAFETY DEVICE ON LIFTING CROWDING MAINTENANCE GENERAL INFORMATION CONTROL TECHNICAL SPECIFICATIONS depending on equipment O O N O 13 15 17 19 20 21 21 22 23 23 24 25 26 28 29 30 33 The loader is a complex machine The end user must read this instruction book before first use Familiarise yourself with Safety instructions Hitching and unhitching of the loader Hitching and unhitching of the implements Fulluse of the controls NE ZH 19 rue de Rennes BP 83221 F 35690 ACIGN 5 Modification reserved 1 SAFETY INSTRUCTIONS Control the loader only from the driver s seat Do not let go of the controls until the movements are complete Do not leave the seat before locking the controls to prevent any movement Never leave the tractor while its loader is lifted Following loader use park the tractor with the loader lowered to the ground It is compulsory to ensure that nobody is in the area while the loader is in use see chapter SAFETY DEVICE ON LIFTING CROWDING The operation must use the implement designed and recommended by MX for the work to be carried out The transport or elevation of persons using the loader is forbidden Ensure tractor stability by using a counterweight Please
16. device from the outside In this case the red indicator lights go off NE ZH 19 rue de Rennes BP 83221 F 35690 ACIGN 27 Modification reserved 19 MAINTENANCE Change the tractor hydraulic oil and filters regularly in accordance with the tractor manufacturer recommendations Used oil does not lubricate it also contributes to the damage of all hydraulic components pump valves rams Even clear oil may not lubricate For any maintenance operations made whilst the loader is the raised position the loader must be locked into position Two possibilities Lock the joystick in the cab see chapter CONTROL or Disconnection of the MACH System if loader has one or closing the tap fitted on the lifting coupler if the loader is without MACH System see chapter LOADER UNHITCHING When using a high presssure cleaner do not direct water towards the electrical components Clean the implement and the loader front after each use The acid from slurry fertilisers and silage is harmful to paint steel and the machine s pivot points Grease every 10 hours and after each wash grease eliminates water and particularly after washing with a high pressure cleaner Check the following each month and more frequently when used intensively Condition of the loader articulations If necessary replace the wear bushes and or the pins The wear bushes must be replaced if t
17. een the lifting rams and the control valve must be open E 2 2 Complete lowering of the load must be measured at the implement s pivot point E 3 Acceptance criterion Complete lowering measured in E 2 2 during the first 10 seconds must not exceed 100 mm in the event of a stop or manual disabling of the safety device 300 mm in the case of a continuously actuated safety device After 5 min lowering must not exceed an additional 100 mm MISC x 19 rue de Rennes BP 83221 F 35690 ACIGNE 26 Modification reserved 18 2 Use The hydraulic circuit of the lifting and bucket rams is fitted with a safety device and By default the safety device is actuated As soon as the user presses the button in the cab secure button the safety device is disabled and the red indicator lights come on the button in the cab the external button E the two solenoid valve connectors of the lifting rams Button function Press A safety device disabled Press B safety device actuated CAUTION disabling the safety device is only authorised when nobody is near the load In this case the floating position held and the Shock Eliminator are compatible By pressing buttons or O the safety device is automatically actuated red lights off Note As soon as the tractor is switched off the safety device is automatically actuated The button o is used exclusively to reactivate the safety
18. en people are present near the load option In compliance with the EN 12525 A2 2010 standard it can be disengaged for working when no one is near the load The movements can then be carried out with no loss of power or speed of execution Unique this equipment is compatible with the Shock Eliminator and the notched floating position 18 1 Extract from the Front Loaders standard EN12525 A2 2010 4 4 4 Protection against unintended lowering If the front loader is also designed for lifting operations requiring the presence of someone near the load when the loader is in raised position the hydraulic circuit of the lifting arm cylinders must be fitted with a safety device in compliance with Annex E with the aim of preventing unintended lowering of the lifting arm and which must remain active in the event of rupture of the power supply of the control circuit If this safety device can be put in on off or enabled disabled positions for operations that do not require the presence of someone near the load then the following additional specifications apply it must be possible to put the safety device into on off or enabled disabled position from the driver s cab it must be possible to put the safety device into on or enabled position from the ground and not be near the load the control for putting the safety device into off or disabled position must be designed and located so that the operator cannot actuate it unintentionally
19. hey are less than 1 mm thick The tractor s hydraulic oil level and the sealing of the hydraulic system If you notice any internal or external leaks on the hydraulic parts rams hoses connectors Mach couplings etc contact your dealer Condition of the hoses replace them if you notice any small cracks or oil Correct operation of the monolever cables play locking etc Condition of the electric wiring Please contact your dealer if there is any damage to connectors or cables Mechanical condition any cracking deformation fretting on stops play parking stands etc Please contact your dealer if there is any abnormal wear MISC x 19 rue de Rennes BP 83221 F 35690 ACIGNE 28 Modification reserved Check the tightness of the bracket after 10 50 hours then every 100 hours or when carring out tractor maintenance In case of untightness please contact your dealer IMPORTANT All the screws needing to be retightened must be inspected changed if necessary cleaned and smeared with loctite Tighten the screws to the tightening torque specified in the table below Use of a pneumatic spanner to tighten the screws on the tractor is forbidden Tightening torque Nm 10 9 12 9 M8 M 10 M 12 M 14 M 16 M 18 M 20 M 22 M 30 x 150 M 40 x 150 20 GENERAL INFORMATION Each implement is designed for a specific use and has its own resistance limits Land clearing and stump extraction
20. ion 17 1 SCS ON OFF An ON OFF switch is located on the MACH SYSTEM An LED indicates to the driver in his cab if SCS is ON or OFF LED ON SCS in service LEDOFF SCS OFF 17 1 1 Chargeur avec porte outil SPEED LINK 2 A system located inside the SCS compatable Speed Link plug on the implement will make the automatic activation of the system when connecting the implement Note The switch located on Mach System indicates if the SCS is ON or OFF depending on the implement specification SCS compatible or not If it is required to disconnect SCS when using SCS compatable implement please toggle the switch LED ON OFFI 17 2 SCS driving SCS is opperated through the same button as 4th function and crowding or dumping Grab opening bucket dumping press 4th function button dumping Bucket crowding grab closing press 4th function button crowding Remarks In order to optimise the SCS when loading a trailer it is recommanded to start the system when the implement arrives at the level position Ifgrab is fully opened before bucket fully is dumped release 4th function switch to continue dumping l bucket is totally dumped before grab is fully opened use 3rd service to open the grab NE ZH 19 rue de Rennes BP 83221 F 35690 ACIGN 25 Modification reserved 18 SAFETY DEVICE ON LIFTING CROWDING This device is essential for working wh
21. lace the implement on the ground by slightly tipping it to free the implement carrier NOTE Using an implement with one D A hydraulic service but without Speed Link 2 plug is possible If necessary disconnect the hydraulic couplings at the back of the Speed link 2 frame once the pressure has been released NE ZH 19 rue de Rennes BP 83221 F 35690 ACIGN 16 Modification reserved 8 IMPLEMENT HITCHING This operation must be carried out by the driver who must leave the seat and ensure all manoeuvres are forbidden while he is working on the loader 8 1 Implement carrier with manual unlocking Check the unlocking lever is in the hitching position lever turned backwards Locking pins are retracted springs are compressed A CAUTION check implement hoses are away from hitching area Approach the loader towards the implement Slot onto the implement s hitching brackets Crowd the implement back while driving forwards until the unlocking lever is triggered Turn the engine off Decompress the loader s hydraulic lines feeding the implement NOTE If the loader is fitted with a solenoid valve with turned on the contact and press the control button NE Y 19 rue de Rennes BP 83221 F 35690 ACIGN 17 Modification reserved Connect the couplers when implement with hydraulic functions 8 2 FAST LOCK implement frame carrier Before attaching the implement ensure that
22. n reserved 11 FAST LOCK SYSTEM The FAST LOCK System optional on the implement carrier allows tools to be hitched and unhitched without hydraulic or electrical operation from the driver s cab Locked position O Released position O 12 SPEED LINK 2 SYSTEM The SPEED LINK 2 System optional on the implement carrier allows tools to be hitched and unhitched without hydraulic and electrical operation from the driver s cab SPEED LINK 2 equipment loader side SPEED LINK 2 equipment implement side amp A red green indicator on the back of the SPEED LINK 2 box lets the driver in the cab know the implement s locking Status NE ZH 19 rue de Rennes BP 83221 F 35690 ACIGN 21 Modification reserved 13 SELF LEVELLING PCH System The hydraulic compensating parallelogram system operates automatically option The system is equipped with safety hydraulic componants that should not be modified under any circumstances 13 1 Bucket Position When the loader is being raised or lowered the PCH system keeps the implement in the best suited position i e the loaded material does not fall forwards or backwards 13 2 Pallet Position When the loader is being raised or lowered the PCH system maintains the pallet carrier in a horizontal position i e the material loaded level at ground level is maintained in the horizontal position while lifting
23. rn the isolating thumbwheel 1 A released position B locked position 21 4 2 Movements First function along Y axis Forwards loader lowered Double action of the hydraulic ram Forwards after notch floating position Single action of the hydraulic ram Backwards loader raised Second function along X axis To the left implement crowding To the right implement dumping Third function along X axis Button 1 crowding or dumping movement Fourth function along X axis Button 2 crowding or dumping movement FAST LOCK Automatic hitching unhitching of the implement Button 1 4 crowding or dumping movement SPEED LINK 2 Automatic hitching unhitching of the implement with hydraulic and electric functions Button 1 4 crowding or dumping movement ACS Implement position reset Button 8 Note Button 4 operational only in the case of the FAST LOCK or SPEED LINK 2 option 21 5 Control with MX TECHPILOT control valve Please refer to Techpilot instruction book MISC x e 19 rue de Rennes BP 83221 F 35690 ACIGNE 32 Modification reserved 22 TECHNICAL SPECIFICATIONS MXT406 MXT408 MXT410 MXT412 MXT417 MXT418 Length A 2 30 m 2 40 m 2 50 m 2 60 m 2 75 m 2 75 m Width B 1 18 m 1 18 m 1 18 m 1 18 m 1 38 m 1 38 m Height C 1 72 m 1 78 m 1 83
24. service pressure of 200 bar Never modify hose connections The breaking of the seals will result in the cancellation of the MX responsibility for all the equipment supplied The assembly of an MX loader which excludes the recommendations in the MX price list in force at the purchase date cancels the MX guarantee on all the equipment supplied Any modification to a section of any MX equipment implements loader bracket etc or the use of an implement or element installed on the MX loader of foreign origin cancels the MX guarantee for all equipment supplied Use only MX original spare parts Do not modify your MX loader or its accessories yourself or have another person modify them mechanical electrical hydraulic pneumatic characteristics without prior written agreement from MX Failure to respect these regulations may make the loader dangerous MX will disclaim all responsibility in the event of damage or injury The guarantee is immediately invalid when the instructions for use and the MX loader maintenance schedule outlined in User Manual are not observed MISC 19 rue de Rennes BP 83221 F 35690 ACIGN 6 Modification reserved 2 SAFETY STICKERS Security stickers are located on the loader Keep them readable and clean and change them if damaged MXT400 loaders with ADO5 bracket MXT400s loaders with AD90 bracket
25. tact on and pressing the buttons Disconnect the hydraulic s MACH 2 disconnect Couplings disconnect and place plastic caps on the male and female couplings Place the hoses on the front of the implement SAH EL Implement unhitching From the L H side of the loader pull on the lever to the end Never operate from the front of the implement NE ZH 19 rue de Rennes BP 83221 F 35690 ACIGN 15 Modification reserved Pull the lever towards you until it stays engaged 7 2 FAST LOCK implement frame carrier Raise the loader to lift the implement off the ground With the implement horizontal press the green and orange buttons while moving the crowd lever to the right dumping The implement is now unlocked Place the implement on the ground by slightly tipping it to free the implement carrier from the implement NOTE If the implement has one or more hydraulic functions firstly disconnect the hoses 7 3 SPEED LINK 2 implement frame carrier Raise the loader to lift the implement off the ground In order to maximise the hydraulic components life take care that the implements hydraulics are not at pressure before disconnecting Slightly open the grab for example Press the green and orange buttons while moving the crowd lever to the right dumping The implement is now unlocked The locking indicator at the back of the Speed Link 2 frame is red P
26. the tractor On the left side pull the unlocking handle sharply downwards The locking indicator is in the red zone MX T400s loaders On the left and right hand unlock taper pin by pulling the lever forward Push the lever upwards with your palm until it engages in parked position Lower the left and right parking stands NE ZH 19 rue de Rennes BP 83221 F 35690 ACIGN 9 Modification reserved Setting the parking stands at the time of first use 1 Place the implement flat on the ground 2 Lower the parking stand 3 Remove the rod stop and position the parking stand on the ground 4 Select a notch that provides a distance of between 3 and 5 cm with the ground when you manually raise the parking stand 5 In this position lift the stop to meet the locking pin E 6 Perform the same process for the other parking stand MISC x 19 rue de Rennes BP 83221 F 35690 ACIGNE 10 Modification reserved Disconnect the hydraulic s and electric s Loader with MACH System Release the MACH System housing by pushing the locking pin on the LH side and lifting the handle up Hook the MACH System on the support Loader without MACH System Close the tap and disconnect the couplings Position the protective covers clean to the male and female couplings Store the hoses on the loader On the right side pull the unlocking handle sharply downwards The
27. tion reserved 21 3 Control with MX PROPILOT control valve 21 3 1 Security Involuntary loader manoeuvre can be avoided The PROPILOT joystick can be locked Move the unlocking lever 1 A released position B locked position 21 3 2 Movements First function along Y axis Forwards loader lowered Double action of the hydraulic ram Forwards after notch floating position Single action of the hydraulic ram Backwards loader raised Second function along X axis To the left implement crowding To the right implement dumping Third function along X axis Button 1 crowding or dumping movement Fourth function along X axis Button 2 crowding or dumping movement FAST LOCK Automatic hitching unhitching of the implement Button 1 4 crowding or dumping movement SPEED LINK 2 Automatic hitching unhitching of the implement with hydraulic and electric functions Button 1 4 crowding or dumping movement Note Button 3 not used Button 4 only available in the case of the FAST LOCK or SPEED LINK 2 option FF INDC Y 19 rue de Rennes BP 83221 F 35690 ACIGN 31 A Modification reserved 21 4 Control with MX FLEXPILOT control valve 21 4 1 Security Involuntary loader manoeuvre can be avoided The FLEXPILOT joystick can be locked Tu
Download Pdf Manuals
Related Search