HDC2000 – Hydrant Drive Card
Contents
1. hydrant was close the motor torque for the first rotation is higher With this value you can set for how many impulse the motor have to give the high power NOTE Active only with Encoder active TIME ON HIGH TORQUE When the hydrant was close the motor torque for the first rotation is higher With this value you can set for how much time the motor have to give the high power NOTE Active only without Encoder RETRY OPEN With this value you can specify how mach time the Motor have to retry to open if it reach the max torque WARNING too mach time can damage the hydrant RETRY CLOSE With this value you can specify how mach time the Motor have to retry to close if it reach the max torque WARNING too mach time can damage the hydrant RETRY CLOSE IN BATTERY MODE With this value you can specify how mach time the Motor have to retry to close if it reach the max torque in battery mode supply lost WARNING too mach time can damage the hydrant HDC 2000 User Manual Last release 30 10 20062. www technofase com TECHNO A Ts HDC2000 Hydrant Drive Card MAX SUPPLY VOLTAGE 24VAC MAX CURRENT MOTOR 3 5 Amp PO PI P2 P3 P4 DISPLAY INFORMATION ACTUAL MOTOR CURRENT When Motor is running LIMIT TORQUE SETTING Set with red tumbles ACTUAL BATTERY VOLTAGE On Power OFF ENCODER COUNTER x100 The impulse counter x100 OPERATING STATUS Only for debug CONNECTION LIST Function 24VAC Voltage supply Earth 24VAC Voltage supply Positive Motor on Open Earth Negative Motor on Open Load Battery supply GND GND GND 24VDC Unregulated 24VDC Unregulated Function Open Command Signal Common Close Command Signal Hydrant Type Common Encoder Input Signal EO Fl E2 E3 E4 ES E6 E7 HDC2000 SETIINGS TOTAL IMPULSE OPEN x100 With this value you can set the maximal rotation of the motor from the last CLOSE sequence When the motor reach the value that is set it stop NOTE Active only with Encoder active NORMAL SPEED CLOSE Set the speed of the motor in the close sequence The speed is proportional to the torque speed too low may be haven t enough power to close the hydrant NORMAL SPEED OPEN Set the speed of the motor in the open sequence The speed is proportional to the torque speed too low may be haven t enough power to open the hydrant TOTAL IMPULSE ON HIGH TORQUE x10 When the
Download Pdf Manuals
Related Search