USER MANUAL
Contents
1. Radio frequency devices Subpart B Unintentional radiators CAUTION E Servicing the machines can only be done by an authorized Kramer technician Any user who makes changes or modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the equipment E Use the supplied DC power supply to feed power to the machine E Please use recommended interconnection cables to connect the machine to other components FCC and CE approved using STP cable for twisted pair products 8 j 690T Technical For the latest information on our products and a list of Kramer distributors visit our Web site where updates to this user manual may be found We welcome your questions comments and feedback Web site www kramerelectronics com KRAMER E mail info kramerel com SAFETY WARNING Disconnect the unit from the power supply before opening and servicing Class 3R Laser Compliance This product complies with ANSI Z136 and IEC 60825 1 2007 CLASS 3R LASER PRODUCT2. 2 1 Getting Started We recommend that you e Unpack the equipment carefully and save the original box and packaging materials for possible future shipment e Review the contents of this user manual e Use Kramer high performance high resolution cables Go to http www kramerelectronics com to check for up to date user manuals application programs and to check if firmware upgrades are available where appropriate Achieving the Best Performance To achieve the best performance e Use only good quality connection cables to avoid interference deterioration in signal quality due to poor matching and elevated noise levels often associated with low quality cables e Avoid interference from neighboring electrical appliances that may adversely influence signal quality e Position your Kramer 690T and the 690R SDI Fiber Optic Transmitter and Receiver away from moisture excessive sunlight and dust Caution No operator serviceable parts inside the unit Warning Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning Disconnect the power and unplug the unit from the wall before installing 690T 690R Ge Overview The 690T is a high performance fiber optic transmitter for SD SDI HD SDI and 3G SDI signals The unit converts up to two channels of serial digital signals to light pulses that are transmitted over a dual single mode cable to a 690R receiver that converts
3. 9 125 over LC connectors CONNECTION POWER SOURCE 5V DC 480mA 5V DC 350mA OPERATING 0 to 55 C 32 to 131 F TEMPERATURE STORAGE 45 to 72 C 49 to 162 F TEMPERATURE HUMIDITY 10 to 90 RHL non condensing DIMENSIONS 6 2cm x 5 2cm x 2 4cm 2 4 x 2 0 x 0 9 W D H WEIGHT 0 14kg 0 31lbs approx each ACCESSORIES 1 Power supply OPTIONS RK 4PT rack adapter Specifications are subject to change without notice at http www kramerelectronics com LIMITED WARRANTY We warrant this product free from defects in material and workmanship under the following terms HOWLONGIS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase WHOIS PROTECTED Only the first purchase customer may enforce this warranty WHAT IS COVERED AND WHAT IS NOT COVERED Except as below this warranty covers all defects in material or workmanship in this product The following are not covered by the warranty 1 Any product which is not distributed by us or which is not purchased from an authorized Kramer dealer If you are uncertain as to whether a dealer is authorized please contact Kramer at one of the agents listed in the Web site www kramerelectronics com 2 Any product on which the serial number has been defaced modified or removed or on which the WARRANTY VOID IF TAMPERED sticker has been torn reattached removed or otherwise interfered with 3 Damage
4. KRAMER ELECTRONICS LTD USER MANUAL MODELS 690T SDI Fiber Optic Transmitter 690R SDI Fiber Optic Receiver P N 2900 300083 Rev 1 690T 690R Quick Start Guide This guide takes you through a basic installation and first time use of your 690T 690R For more detailed information see the 690T 690R user manual You can download the latest manual at http Awww kramerelectronics com Step 1 Check what s in the box E The 690T SDI Fiber Optic Transmitter or A 4 Rubber feet the 690R SDI Fiber Optic Receiver A 1 Quick start guide E power adapter 5V DC input A asana 4 Mounting brackets Step 2 Install the 690T 690R Mount the units in a rack RK 4PT or place them on a table Step 3 Connect inputs and outputs 3G SDI Display 1 3G SDI Display 2 FIBER IN 5V DC SDI Fiber OpticTransmitter 690T Fiber Optic SDI Repeiver 690R up to 10km On the 690T gt Connect two 3G SDI video players On the 690R gt Connect two 3G SDI displays Connect 690T to 690R gt Connect the fiber optic cable from the optic connector on the 690T to the optic connector on the 690R See SSS SS SSS SSS S929 Contents 1 Introduction 2 Getting Started 2 1 Achieving the Best Performance 3 Overview 3 1 Defining the 690T and the 690R SDI Fiber Optic Transmitter and Receiver 4 Connecting the 690T and the 690R 5 Technical Specifications Figures Figure 1 690T SDI Fiber Optic Tra
5. deterioration or malfunction resulting from i Accident misuse abuse neglect fire water lightning or other acts of nature ii Product modification or failure to follow instructions supplied with the product iii Repair or attempted repair by anyone not authorized by Kramer iv Any shipment of the product claims must be presented to the carrier v Removal orinstallation of the product vi Any other cause which does not relate to a product defect vii Cartons equipment enclosures cables or accessories used in conjunction with the product WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR We will pay labor and material expenses for covered items We will not pay for the following 1 Removalor installations charges 2 Costs of initial technical adjustments set up including adjustment of user controls or programming These costs are the responsibility of the Kramer dealer from whom the product was purchased 3 Shipping charges HOW YOU CAN GET WARRANTY SERVICE 1 To obtain service on you product you must take or ship it prepaid to any authorized Kramer service center 2 Whenever warranty service is required the original dated invoice or a copy must be presented as proof of warranty coverage and should be included in any shipment of the product Please also include in any mailing a contact name company address and a description of the problem s 3 For the name of the nearest Kramer authorized service center consult your aut
6. horized dealer LIMITATION OF IMPLIED WARRANTIES All implied warranties including warranties of merchantability and fitness for a particular purpose are limited in duration to the length of this warranty EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option Kramer shall not be liable for 1 Damage to other property caused by defects in this product damages based upon inconvenience loss of use of the product loss of time commercial loss or 2 Any other damages whether incidental consequential or otherwise Some countries may not allow limitations on how long an implied warranty lasts and or do not allow the exclusion or limitation of incidental or consequential damages so the above limitations and exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from place to place NOTE All products returned to Kramer for service must have prior approval This may be obtained from your dealer This equipment has been tested to determine compliance with the requirements of EN 50081 Electromagnetic compa ibility EMC generic emission standard Part 1 Residential commercial and light industry EN 50082 Electromagnetic compatibility EMC generic immunity standard Part 1 Residential commercial and light industry environment CFR 47 FCC Rules and Regulations Part 15
7. nnectors 2 Connect the two SDI OuT connectors to up to two SDI acceptors for example 3G SDI displays The SDI 1 IN source signal on the 690T is always routed to the SDI 1 OUT acceptor on the 690R and the SDI 2 IN source signal on the 690T is always passed to the SDI 2 OUT acceptor on the 690R 3 Remove the dust caps and connect the OPTIC CABLE connector of the 690T to the OPTIC CABLE connector of the 690R via dual single mode cable 9 12 over LC connectors a maximum range of 10km more than 6 2 miles 4 Connect the power adapter to the 5V DC socket and to the mains electricity for both the 690T and the 690R not shown in Figure 3 T Avoid direct eye exposure into the optic connectors when powered although this product is regulated strictly enough to operate under the Laser Class 3R for eye safety 3G SDI Video Player 2 up to 10km 3G SDI Display 1 3G SDI Display 2 Figure 3 Connecting the 690T and or 690R 690T 690R Connecting the 690T and the 690R 5 T 690R Technical Specifications Technical Specifications 690T 690R INPUTS 2 SDI HD SDI 3GSDI on BNC 2 LC optical connectors connectors OUTPUTS 2 LC optical connectors 2 SDI HD SDI 3GSDI on BNC connectors BANDWIDTH Supports up to 3Gbps bandwidth for each input FIBER OPTIC Up to 10km gt 6 2 miles for 3G SDI EXTENSION INPUT CABLE 200m for SDI 100m for 3G SDI EQUALIZATION FIBER OPTIC Dual single mode fiber
8. nsmitter Front and Rear Panels Figure 2 690R SDI Fiber Optic Receiver Front and Rear Panels Figure 3 Connecting the 690T and or 690R No BOND OAD Introduction Welcome to Kramer Electronics Since 1981 Kramer Electronics has been providing a world of unique creative and affordable solutions to the vast range of problems that confront the video audio presentation and broadcasting professional on a daily basis In recent years we have redesigned and upgraded most of our line making the best even better Our 1 000 plus different models now appear in 11 groups that are clearly defined by function GROUP 1 Distribution Amplifiers GROUP 2 Switchers and Matrix Switchers GROUP 3 Control Systems GROUP 4 Format Standards Converters GROUP 5 Range Extenders and Repeaters GROUP 6 Specialty AV Products GROUP 7 Scan Converters and Scalers GROUP 8 Cables and Connectors GROUP 9 Room Connectivity GROUP 10 Accessories and Rack Adapters and GROUP 11 Sierra Products Congratulations on purchasing your Kramer Pico TOOLS 690T SDI Fiber Optic Transmitter or 690R SDI Fiber Optic Receiver which are ideal for the following typical applications e Home theater presentation and multimedia applications e Long range multimedia distribution for cinemas stores and entertainment centers e Video production and broadcast facilities e Retail stores and other point of sale systems e Digital signage R Introduction 2
9. pter 3 1 Defining the 690T and the 690R SDI Fiber Optic Transmitter and Receiver Figure 1 and Figure 2 define the 690T and 690R respectively FIBER OUT pticTransmitter 6390T Front Panel Rear Panel Figure 1 690T SDI Fiber Optic Transmitter Front and Rear Panels 2 FIBER OuT Dual SFP Connects to the dual optical connector on the 690R via Connector dual single mode cable 5V DC Connector Connect to the power adapter SDI IN 2 BNC Connector Connect to the SDI source 2 SDI IN 1 BNC Connector Connect to the SDI source 1 FIBER IN 5V DC Fiber Optic SDI Receiver Front Panel Rear Panel Figure 2 690R SDI Fiber Optic Receiver Front and Rear Panels Feature Function ON LED llluminates when receiving power 2 FIBER IN Dual SFP Connects to the dual optical connector on the 690T via Connector dual single mode cable 5V DC Connector Connect to the power adapter SDI OuT 1 BNC Connector Connect to the SDI acceptor 1 SDI Out 2BNC Connector Connect to the SDI acceptor 2 690T 690R Overview 4 Connecting the 690T and the 690R Always switch off the power to any device before connecting it to your 690T and or 690R After connecting your 690T and or 690R connect the power and then switch on the power to the device To connect the 690T and the 690R as illustrated in the example in Figure 3 1 Connect up to two SDI sources for example 3G SDI video players to the two SDI IN co
10. them back to serial digital signals The 690T and the 690R pair have a transmission range of 10km more than 6 2 miles for 3G SDI The 690T and the 690R feature A maximum data rate of up to 3Gbps enabling it to be used for standard definition high definition and the new 3G high definition serial digital video signals 3G SDI Two SDI gold plated BNC connectors each for the transmitter and the receiver SD SDI HD SDI and 3G SDI support of video pathological patterns for SMPTE 259M SMPTE 344M SMPTE 292M and SMPTE 297 2006 Standard Definition SD SDI means an NTSC or PAL compatible video format consisting of 480 for NTSC or 576 for PAL lines of interlaced video High Definition HD SDI means a video format consisting of 720 active lines of progressive video or 1080 lines of progressive or interlaced video 3G SDI means a video format consisting of 1080 lines of progressive video Support of data rates of 270Mbps 1483 5Mbps 1485Mbps and 2970Mbps SMPTE 297 2006 compatible electrical to optical interfaces HDTV compatibility Reclocking and equalization on each channel Cable equalization up to 200m for 1 5GHz HD signals and 100m for 3GHz HD signals Strict regulation in accordance with Class 3R Laser Eye Safety in compliance with ANSI Z136 and IEC 60825 1 2007 5V DC power adapters and housing in Kramer Pico TOOLS enclosures Four units can be rack mounted side by side in a 1U rack space with the optional RK 4PT rack ada
Download Pdf Manuals
Related Search