EmQ-i2301 - Arbor Technology
Contents
1. EE EU 18 3 2 1 Boot Configuration en 20 3 2 2 PCI Express Configuration 20 3 2 3 USB Configuration una 21 3 2 4 Audio Configuration sse 21 3 2 5 LPSS amp SCC Configuration 22 3 2 6 Miscellaneous 23 3 2 7 Security Configuration esses 23 3 2 8 Video Configuration 24 3 2 9 SATA ee 26 3 2 10 ACPI Table Feature 26 3 2 11 LM90 Thermal Sensor 27 3 2 12 SIO 81866 27 Contents Bide SOC CUNY PM hearse eens 28 Qu POWET 29 3 4 1 Advanced CPU 30 ou 32 oM si TT 34 Copyright Notice All Rights Reserved The information in this document is subject to change without prior notice in order to improve the reliability design and function It does not represent a commitment on the part ofthe manufacturer Under no circumstances will the manufacturer be liable for any direct indirect special incidental or consequential damages arising from the use or inability to use the product or documentation even if advised of the possibility of such damages This documen2. 193 VCC 194 195 FAN TACHOIN N C 196 FAN PWMOUT N C 13 This page is intentionally left blank 14 Ta Chapter 3 BIOS BIOS The BIOS Setup utility is featured by Insyde BIOS to configure the system settings stored in the system s BIOS ROM Insyde BIOS is activated once the computer powers on After entering the utility use the left right arrow keys to navigate between the top menus and use the down arrow key to access one Menu Description Main See 3 1 Main on page 17 Advanced See 3 2 Advanced on page 18 See 3 3 Security on page 28 See 3 3 Security on page 28 See 3 4 Boot on page 32 See 3 5 Exit on page 34 NOTE For system stability and performance this BIOS utility is constantly improved The screenshots demonstrated and descriptions hereinafter are for reference only and may not exactly meet what is presented onscreen 16 BIOS 3 1 Main The Main menu displays some BIOS info and features the settings of System Date and System Time F5 F6 Enter The BIOS info displayed is Info Item Description BIOS Version Delivers the computer s BIOS version Project name Delivers the name of the project Build Date and Time Delivers the date and time when the BIOS Setup utility was created updated Platform firmware Delivers the Platform firmware Information Information The featured settings are Setting
3. 1 x Intel i210IT PCle GbE controller Audio BIOS HD Audio Link Insyde BIOS Serial ATA 2 x Serial ATA ports w 300MB s HDD transfer rate Universal Serial Bus 8 x USB 2 0 ports Storage Soldered onboard 16GB eMMC Optional Graphics Interface LCD Dual Channels 24 bit LVDS resolution up to 1920x1200 Analog RGB signals via Qseven GF reserved pin 1 x DDI port Expansion Bus 3 x PCle x1 lanes SDIO I2C Operating Temp 20 C 70 C 4 F 158 F for EmQ i2301 Watchdog Timer 1 255 levels Reset Dimension L x W 70 x 70 mm 2 76 x 2 76 Introduction e 1 4 Inside the Package Before starting with the installation make sure the following items are shipped If any of the items is missing or appears damaged contact your local dealer or distributor 1 x EmQ i2301 Qseven CPU Module 1 x Driver CD 1 x Quick Installation Guide 1 5 Ordering Information Intel Atom Processor Bay E3825 Qseven CPU ESSE module w 2GB memory soldered on module Intel Atom Processor Bay E3845 Qseven CPU Eno nO module w 2GB memory soldered on module Intel Atom Processor Bay E3825 Qseven CPU module w 4GB memory soldered on module Intel Atom Processor Bay E3845 Qseven CPU module w 4GB memory soldered on m
4. Options available are AHCI default and IDE SATA Port 0 Hot Plug Enables disables hot pluggable feature for the SATA Capability port SATA Port 1 Hot Plug Enabled is the default Capability SATA Port 0 Connect Enables disables the SATA port connect to an ODD to an ODD If enabled when you connect an ODD to a SATA port SATA Port 1 Connect The software auto detection for media insert and tray will be enabled to an ODD gt Disabled is the default Serial ATA Port 0 Serial ATA Port 1 Delivers the SATA port Media information and Security Mode 3 2 10 ACPI Table Feature Control Setting Description FACP RTC S4 Wakeup This function will be available only when ACPI is enabled Enables disables S4 Wakup from RTC APIC 10 APIC Mode This item is valid only for WIN2K and WINXP Also a fresh install of the OS must occur when APIC mode is desired Enables disables the APIC mode DSDT ACPI S3 Enables disables ACPI S3 state DSDT ACPI S4 BGRT ACPI BGRT Enables disables ACPI S4 state Enables disables BGRT Table 26 BIOS 3 2 11 LM90 Thermal Sensor 3 2 12 SIO FINTEK81866 Configures SIO by the following settings Setting Description Set the state of Power Loss mode Bowel boss Options are Always On default Always Off gt Serial Port Enables disables the Serial port Serial Port gt Base I
5. the system Replacing the Lithium Battery Incorrect replacement of the lithium battery may lead to a risk of explosion The lithium battery must be replaced with an identical battery or a battery type recommended by the manufacturer Do not throw lithium batteries into the trash can It must be disposed of in accordance with local regulations concerning special waste Technical Support If you have any technical difficulties please do not hesitate to call or e mail our customer service http www arbor com tw E mail info arbor com tw vi Warranty This product is warranted to be in good working order for a period of two years from the date of purchase Should this product fail to be in good working order at any time during this period we will at our option replace or repair it at no additional charge except as set forth in the following terms This warranty does not apply to products damaged by misuse modifications accident or disaster Vendor assumes no liability for any damages lost profits lost savings or any other incidental or consequential damage resulting from the use misuse of or inability to usethisproduct Vendorwillnotbeliableforanyclaimmadeby any otherrelated party Vendors disclaim all other warranties either expressed or implied including but not limited to implied warranties of merchantability and fitness for a particular purpose with respect to the hardware the accompanying prod
6. O Address A B C D Setup the Base I O Address of the Serial Port gt Interrupt Setup the Interrupt of the Serial Port ED BIOS 3 3 Security The Security menu sets up the password for the system s administrator account Once the administrator password is set up this BIOS Setup utility is limited to access and will ask for the password each time any access is attempted Set Supervisor Password The featured setting is Setting Description To set up an administrator password 1 Select Set Supervisor Password An Create New Password dialog then pops up onscreen Enter your desired password that is no less than 3 characters and no more than 20 characters 3 Hit Enter key to submit Set Supervisor Password 28 BIOS 3 4 Power The Power menu sets up the power option of system Advanced CPU Control The featured setting is Setting Description Advanced See 3 4 1 Advanced CPU Control on page 30 CPU Control Enables or diables Wake on PME Wake PME Determines the action taken when the system power is off and a Power Management Enable wake up event occurs If enabled force the system to enable RTC S5 wake up even if OS disable it Support ipwrtest to do RTC S5 wakeup Options are Enabled Disabled 55 Long run test 29 BIOS 3 4 1 Advanced CPU Control Use XD Capability lt Enabled gt Setting Descrip
7. SUL Si Options are 1MB 2MB Apeture Size Set the Aperture size Options are 128MB 256MB 512MB IGD DVMT Pre Set the DVMT5 0 Pre Allocated Fixed Graphics Memory Allocated size used by the IGD IGD DVMT total Gfx Mem Set the size of DVMT 5 0 used by IGD IGD Turbo Enables disables IGD Turbo IGD Thermal Enables disables IGD Thermal Spread Spectrum clock Enables disables Spread Spectrum clock 3 2 8 6 IGD LCD Control Setting Description Force Lid Status Set mode of as the Primary Display Options are ON default OFF Auto Set the mode of BIA BIA Options are Auto default Disabled Level 1 Level 2 Level 3 Level 4 Level 5 ALS Support Enables Disables ALS support IGD Flat Panel Set resolution of IGD Flat Panel IGD Boot Type Panel Scaling Set the Boot Type of IGD Set the Scaling of Panel Options are Auto default Centering Stretching GMCH BLC Control Set the mode of GMCH BLC Control Options are Auto default PWM Inverted GMBus Inverted PWM Normal GMBus Normal 25 BIOS 3 2 9 SATA Configuration Select this submenu to configure the SATA controller and HD Setting SATA Controller s Description Enables disables the present SATA controller gt Enabled is the default SATA Test Mode Enables disables the SATA test mode Configures SATA Mode Configures how to sun the SATA drives
8. quit the BIOS Quits the BIOS Setup utility without saving the Exit Discard Changes change s Restores all settings to defaults Load Optimal Defaults gt Thisis a command to launch an action from the BIOS Setup utility rather than a setting Load Custom Default Load custome default values Save Custom Default Save current setting as custome default Discard Changes Discard all changes without Exit 34
9. support 31 BIOS 3 4 Boot The Boot menu configures how to boot up the system such as the configuration of boot device priority Boot Type lt Legacy Boot Type gt F5 F6 Enter The featured settings are Setting Description Allow InsydeH20 to Skip certain tests while booting Eost This will descrese the time need to boot the system Quiet Boot Disables or enables booting in text mode PXE boot to LAN Disables or enables PXE boot to LAN Power Up In Standby Disable or enable Power Up In Standby Support Support Position in Boot Order for Shell Network and Add Boot Option Removables Options are First Last and Auto Select boot to Acpi 3 0 Acpi 1 0B Options are Acpi 1 0B Acpi 3 0 Acpi 4 0 Acpi 5 0 APCI Selection 32 BIOS USB Boot Disables or enables booting to USB boot devices 5 Set the waiting seconds before booting the default boot Timeout selection Automatic Failover Enables disables the Automatic Failover 33 BIOS 3 5 Exit The Save amp Exit menu features a handful of commands to launch actions from the BIOS Setup utility regarding saving changes quitting the utility and recovering defaults Exit Saving Changes F5 F6 Enter The features settings are Setting Description Exit Saving Changes Saves the changes and quits the BIOS Setup utility Save Changes Without Exit Save Changes but does not
10. 75 USB_P7 76 USB P6 13 GBE_LINK 14 GBE_ACT 77 USB 78 USB_P6 15 GBE 16 505 554 79 USB 6 7 80 USB 4 5 OC 17 WAKE 18 SUS 53 81 USB P5 82 USB P4 19 805 20 PWRBTN 83 USB_P5 84 USB_P4 21 51 22 LID BTN 85 USB 2 3 OC 86 USB 0 1 OC 23 GND 24 87 USB P3 88 USB P2 KEY KEY 89 USB P3 90 USB 2 25 GND 26 PWGIN 91 USB HOST 92 USB HC SEL 27 BATLOW amp 28 RSTBTN 93 USB P1 94 USB PO 29 30 SATA1_TX 95 USB_P1 96 USB_PO 31 TX 32 lt 5 1 TX 97 GND 98 33 SATA 34 GND 99 LVDS_AO 100 LVDS_BO 35 RX 36 SATA1_RX 101 LVDS_AO 102 LVDS BO 37 RX 38 SATA1 RX 103 LVDS_A1 104 LVDS_B1 39 GND 40 GND 105 LVDS_A1 106 LVDS_B1 41 BIOS_DISABLE 42 SDIO CLK amp 107 LVDS A2 108 LVDS_B2 43 SDIO 44 SDIO LED N C 109 LVDS A2 110 LVDS B2 45 SDIO CMD 46 SDIO WP 111 LVDS PPEN 112 LVDS BLEN 47 5010 PWR amp 48 SDIO DAT1 113 LVDS_A3 114 LVDS B3 49 5010 DATO 50 5010 DAT3 115 LVDS A3 116 LVDS B3 51 SDIO_DAT2 52 SDIO DAT5 117 GND 118 GND 53 SDIO_DAT4 54 SDIO DAT7 119 LVDS_A_CLK 120 LVDS_B_CLK 55 SDIO_DAT6 56 RSVD NIC 121 LVDS A CLK 122 LVDS B CLK 57 GND 58 GND 123 LVDS BLT CTRL 124 RSVD N C 59 SYNC 60 SMB_CLK 125 LVDS_DID_DAT 126 CRT_DDC_Data 61 RST 62 SMB DAT 127 LVDS DID CLK 128 CRT DDC CLK 63 HDA BITCLK 64 SMB_ALERT 129 TX
11. Description Language Select the current default language used by the InsydeH20 System Time Sets system time System Date Sets system date 247 BIOS 3 2 Advanced The Advanced menu controls the system s CPU IDE Super IO AHCI and USB It also helps users monitor hardware health Boot Configuration 18 BIOS The featured submenus are Submenu Description Boot Configuration See 3 2 1 Boot Configuration on page 20 PCI Express Configuration See 3 2 2 PCI Express Configuration on page20 USB Configuration See 3 2 3 USB Configuration on page 21 Audio Configuration LPSS amp SCC Configuration See 3 2 4 Audio Configuration on page 21 See 3 2 5 LPSS amp SCC Configuration on page 22 Miscellaneous Configuration See 3 2 6 Miscellaneous Configuration on page 23 Security Configuration See 3 2 7 Security Configuration on page 23 Video Configuration See 3 2 8 Video Configuration on page 24 SATA Configuration See 3 2 9 SATA Configuration on page 26 ACPI Table Feature Control See 3 2 10 ACPI Table Feature Control on page 26 LM90 Thermal Sensor See 3 2 11 LM90 Thermal Sensor on page 27 SIO FINTEK81866 See 3 2 12 SIO FINTEK81866 on page 27 19 BIOS 3 2 1 Boot Configuration Setting Description Numlock Select Power on state for Num lock 3 2 2 PCI Exp
12. EmQ i2301 Qseven CPU Module User s Manual Version 1 0 In 2014 08 ses This page is intentionally left blank Revision History Version Release Time Description 1 0 August 2014 Initial release Contents Revision HISTORY iin en i ieri cer ii A iv Gopyright Nolice Declaratiori oft Conformity iv iv FCC Class A iai eere peste V V p Rn vi Vie vi Replacing the Lithium vi Technical Support nter REN RR REN RAS vi lA EE vii Chapter 1 1 1 1 Product era 2 1 2 About this 2 1 3 Specification Free eH EAE RI eee 3 1 4 Inside the 4 1 5 Ordering Information 5 1 6 Driver Installation 6 Chapter 2 Board Overview sse 9 2 1 Board DimenslORns i cri tc c 10 2 2 Block Diagramme aan 11 2 3 Connector Pin Definition lee 12 Chapter 3 BIOS sissien na na 15 RU M 17 3 2
13. LAN 18 8 1 _64 GPIO GPIO Kit 100882 20140211 windows 8 1 64 GPIO 2 I2C Kit 100882 20140211 windows 8 1 6412 Gach Graphic Win8 1 32bit Kit 57832_win8_32bit_2013 1202 Win32 raphics Graphic Win8 1 64bit Kit 5783364 win8 8 1 _64_2013 1202 win64 MBI MBI MBI Kit 58443 20140106 windows 8 8 132 64 TXE TXE TXE Kit 100885 Windows 8 Driver Path Audio 32 bit Audio Audio 64 bit Chipset 32bit Chipset Kit 57833 32 ipse Chipset 64bit Chipset Kit 57833 64 Ethernet lntel 32bit LAN 18 8 1 32 Ethernet f Ethernet Intel 64bit LAN 18 8 1 64 ai Graphic Win8 1 32bit Kit 57832 win8 32bit 2013 1202Win32 raphics Graphic Win8 1 64bit Kit 5783364_win8_8 1 _64_2013 1202 win64 MBI MBI MBI Kit 58443 20140106 windows 8 8 132 64 TXE Kit 100885 WINUSB WINUSB Driver introduction Windows 7 Driver Path Audio 32 bit Audio Audio 64 bit Chipset 32bit Chipset Kit 57833 _32 Chipset Chipset 64bit Chipset Kit 57833 _64 Ethernet Intel 32bit LAN 18 8 1 32 Ethernet Ethernet Intel 64bit LAN 18 8 1 64 Graphic win 7 Kit 101116 20140402 32bit Intel EMGD WIN7_PC_ Version 36 15 0 1073 Graphics Graphic win 7 101117 20140402 64bit Intel EMGD WIN7_PC_ Version_37_15_0 1073 GPIO GPIO windows 7 32_64 Intel Atom E3800 Win7 IO Drivers_Gold_ v1 0 package 501232_ 20140211 2 l2C windows 7 32_64 Intel Atom E3800 Win IO Drivers Gold v1 0 packa
14. N C 130 CANO RX N C 12 Pin Signal Pin Signal Pin Signal Pin Signal 131 DP1 TX3 P 132 SDVO INT N C 197 198 GND 133 DP1 TX3 N 134 SDVO_INT 199 SPI MOSI 200 SPI 50 135 GND 136 GND 201 SPI MISO 202 SPI CS14 137 DP1 TX1 P 138 DP1 AUX C P 203 SPI SCLK 204 CRT RED 139 DP1 TX1 N 140 DP1 AUX C N 205 5V SB 206 5V SB 141 GND 142 207 CRT VSYNC 208 CRT GREEN 143 DP1 TX2 P 144 5 TVCLKIN 209 CRT HSYNC 210 CRT BLUE 145 DP1 TX2 N 146 SDVO TVCLKIN N C 211 5V 212 5V 147 GND 148 GND 213 5V 214 5V 149 DP1_TXO_P 150 DP1 AUX N 215 45V 216 5V 151 DP1 TXO N 152 DP1 AUX P 217 45V 218 5V 153 HDMI HPD 154 DP_HPD 219 5V 220 5V 155 PCIE_CLK_REF 156 PCIE_WAKE 221 5V 222 5V 157 PCIE REF 158 PCIE RST 223 45V 224 5V 159 160 GND 225 45V 226 5V 161 TX 162 PCIE3_RX N C 227 5V 228 5V 163 164 RX N C 229 5V 230 5V 165 166 167 PCIE2 TX 168 PCIE2 RX 169 PCIE2 TX 170 PCIE2 RX 171 EXCDO_PERST 172 EXCD1_PERST 173 PCIE1_TX 174 PCIE1 RX 175 PCIE1 TX 176 PCIE1 RX 177 EXCDO_CPPE 178 EXCD1_CPPE 179 PCIEO 180 PCIEO RX 181 PCIEO TX 182 PCIEO RX 183 GND 184 185 LPC ADO 186 LPC AD1 187 LPC AD2 188 LPC AD3 189 LPC CLK 190 LPC_FRAME 191 SERIRQ 192 LPC_LDRQ
15. chrome PBB or PBDB that ex ceed a maximum concentration value of 0 1 by weight or for cadmium exceed 0 01 by weight per homogenous material Homogenous material is defined as a substance or mixture of substances with uniform composition such as sol ders resins plating etc Lead free solder is used for all terminations Sn 96 96 5 Ag 3 0 3 5 and Cu 0 5 SVHC REACH To minimize the environmental impact and take more responsibility to the earth we live Arbor hereby confirms all products comply with the restriction of SVHC Substances of Very High Concern in EC 1907 2006 REACH Registration Evaluation Authorization and Restriction of Chemicals regulated by the European Union All substances listed in SVHC lt 0 1 by weight 1000 ppm Warning Single Board Computers and their components contain very delicate Integrated Circuits IC To protect the Single Board Computer its components against damage from static electricity you should always follow the following precautions when handling it 1 Disconnect your Single Board Computer from the power source when you want to work on the inside 2 Hold the board by the edges and try not to touch the IC chips leads or circuitry 3 Use grounded wrist strap when handling computer components 4 Place components on a grounded antistatic pad or on the bag that comes with the Single Board Computer whenever components are separated from
16. e must accept any interference received including interference that may cause undesired operation NOTE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated ina commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense RoHS ARBOR Technology Corp certifies that all components in its products are in compliance and conform to the European Union s Restriction of Use of Haz ardous Substances in Electrical and Electronic Equipment RoHS Directive 2002 95 EC The above mentioned directive was published on 2 13 2003 The main pur pose of the directive is to prohibit the use of lead mercury cadmium hexava lent chromium polybrominated biphenyls PBB and polybrominated diphenyl ethers PBDE in electrical and electronic products Member states of the EU are to enforce by 7 1 2006 ARBOR Technology Corp hereby states that the listed products do not contain unintentional additions of lead mercury hex
17. er a Power failure G3 state Options are SO State default S5 State Clock Spread Spectrum Enables Disables Clock Spread Spectrum Enables Disables Bios Lock Enables Disables BIOS SPI region write protect PCI MMIO Size Set the Size of PCI MMIO Options are 2G default 0 75G 1G 1 25G 1 5G PCI Express Dynamic Clock Gating Enables Disables PCI Express Dynamic Clock Gating Force Legacy Free Enables Disables Force Legacy Free Force Disable KBC 3 2 7 Security Configuration The featured settings are Submenu Setting Description TXE Enables Disables TXE HMRFPO Enables Disables TXE HMRFPO TXE Firmware Update Enables Disables Firmware Update TXE EOP Message Enables Disables Sending EOP Message Bofore OS TXE Unconfiguration Perform Enables Disables TXE Temporary Disable function 23 BIOS 3 2 8 Video Configuration Configure video settings The featured setting is 3 2 8 1 Video Configuration Setting Logo amp SCU Resolution Description Set Logo amp SCU Resolution Options are Auto 640 x480 800 x 600 1024 x 768 3 2 8 2 VBT Hook Configuration Setting Description Configure CRT as Set the option of CRT Options are Default CRT No Device CRT EDID Support Enables Disables CRT EDID Support Configure DDIO as Set the option of DDIO Options are Defau
18. ge 501232 20140211 TXE TXE TXE Kit 100885 USB3 0 USB3 0 SetupUSB3 WINUSB WINUSB Driver This page is intentionally left blank m Chapter 2 Overview Board Overvi 2 1 Board Dimensions 70 00 2 gt 5200 2 gt 36 58 3594 2286 gt 1800 4 amp 1 N 3 00 4 6700 gt 9 Y A Unit mm 10 Board Overview 2 2 Block Diagram DDR3L 1066 1333MHz up to 4GB Inboard DDR 2GB 1xeDP port NXP Dual Channels 24 bit LVDS PTN3460 Analog R G B to Q7 RSV 1 x DDI port DDI1 4 x USB 2 0 host ports 0 3 SMSC 4 x USB 2 0 Ports 4 7 USB4604 3 x PClex1 5 1xPCle x1 Giga LAN Intel i210IT SDIO LPC I F HD Audio Link O SATA1 Ale Board Overview gt gt 2 3 Connector Pin Definition Pin Signal Pin Signal Pin Signal Pin Signal 1 GND 2 65 HDA_SDI 66 12 3 GBE_MDI3 4 2 67 _ 00 68 12 DAT 5 GBE MDI3 6 GBE_MDI2 69 THRM 70 WDTRIG amp 7 GBE LINK100 8 1000 71 THRMTRIP 72 WDOUT 9 MDMH 10 GBE MDIO 73 74 11 GBE_MDI1 12 GBE_MDIO
19. lt DisplayPort HDMI DVI DisplayPort with HDMI DVI Compatible No Device Configure DDI1 as Set the option of DDI1 Options are Default LVDS DisplayPort HDMI DVI DisplayPort with HDMI DVI Compatible No Device Configure eDP Panel Number as Set the option of VBIOS eDP Panel Number Options are 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 LFP EDID Support Enables Disables LFP EDID Support EFP EDID Support Enables Disables EFP EDID Support 3 2 8 3 PTN3460 eDP to LVDS Configuration Setting Description Set the Output Format of PTN3460 Be Options are 00 VESA 24bpp 01 VESA or JEIDA 18bpp 10 JEIDA 24bpp 11 JEIDA 24bpp PTN3460 EDID Table Set the EDID Table of PTN3460 3 2 8 4 GOP Configuration Setting Description GOP Brightness Level Set the Brightness Level of GOP GOP Driver Enables Disables GOP Driver 24 BIOS 3 2 8 5 IGD Configuration Setting Intergrated Graphics Device Description Enables disables Intergrated Graphics Device Primary Display Set IGD or PCI graphic device as the Primary Display Options are Auto IGD PCie RC6 Render Standby Enables Disables Render standby support PAVC Enables disables Protected Audio Video control Power Managment lock Enables disables Power mangement lock DOP CG Enables disables DOP Clock gating Setthe Size
20. odule Intel Atom Processor Bay E3825 Qseven CPU EmQ i2301D E3825 2G BTO module w eMMC16GB and 2GB memory soldered on module Intel Atom Processor Bay Trail I E3845 Qseven CPU EmQ i2301D E3845 2G BTO module w eMMC16GB and 2GB memory soldered on module Intel Atom Processor Bay Trail I E3825 Qseven CPU EmQ i2301D E3825 4G BTO module w eMMC16GB and 4GB memory soldered on module Intel Atom Processor Bay Trail I E3845 Qseven CPU EmQ i2301D E3845 4G BTO module w eMMC16GB and 4GB memory soldered on module HS 0662 F 1 Heat spreader HS 0000 W3 Universal evaluation Heatsink for Qseven CPU module PBQ 3000 Qseven EPIC evaluation board Cable kit 1 x USB cable 1 x USB2 cable 2 x Serial port cables 1 x SATA cable 1 x SATA power cable CBK 06 3000 00 Introduction e 1 6 Driver Installation Note The CPU board supports Windows 7 and Windows 8 8 1 Find the necessary drivers on the CD that comes with your purchase For different OS the driver utility installation may vary slightly but generally they are similar Find the drivers on CD by the following paths Windows 8 1 Driver Path Audio 32 bit Audio Audio 64 bit Chipset 32bit Chipset Kit 57833 32 Chipset A Chipset 64bit Chipset Kit 57833 _64 Ethernet Intel 32bit LAN 18 8 1 32 Ethernet Ethernet Intel 64bit
21. ress Configuration Configures PCI Express by the following settings Setting Description PCI Express Root Port 1 2 3 PCI Express Root Port Enables disables this PCle port PCle Speed Options are Auto Gen 1 Gen 2 Auto is the default ASPM Support Options are Disable disables ASPM LOs force all links to LOs state L1 force all links to L1 state LOsL 1 force all links to LOs L1 state Auto BIOS auto configure On Board LAN Configuration Enables Disables On Board LAN Configuration 20 BIOS 3 2 3 USB Configuration Select this submenu to view the status of the USB ports and configure USB features The featured settings are Setting Description XHCI Pre Boot Mode Enables Disables XHCI Pre Boot mode support Support xHCI Mode Set the mode of operation of xHCI controller Options are Disabled Enabled Auto Smart Auto default XCHI Controller Enables Disables XHCI controller USB2 Link Power Enables Disables USB2 Link Power Management Management XCHI Streams Enables disables XHCI Stream USB OTG Support Enables disables USB OTG Support USB VBUS Turn ON OFF USB VBUS Turn ON in HOST mode and turn OFF in OTG device mode USB Per Port Control Enables Disables USB Per port control 3 2 4 Audio Configurat The featured settings are ion Setting Description Audio Controller Enables Disables Azalia Cont
22. roller Azalia VCi Enable Enables Disables Virtual Channel 1 of Audio Controller Azalia HDMI Codec Enables Disables Internal HDMI codec for Azalia 2321 BIOS 3 2 5 LPSS amp SCC Configuration The featured settings are Setting Description LPSS amp SCC Device Mode Set the mode of LPSS amp SCC Device Options are ACPI mode default PCI mode OS Selection Set the mode of OS Selection Options are Windows default Android SCC eMMC Boot Set the mode of Boot mode Controller Options are Disable Auto Detect Default eMMC 4 41 eMMC 4 5 eMMC Secure Erase Enables disables eMMC Secure Erase SCC SDIO Support Enables disables SCC SDIO Support SCC SD Card Supprt Enables disables SCC SD Card Supprt SDR25 Capability Support for SDCard DDR50 Capability Support for SDCard Enables disables SDR25 Capability Support for SDCard Enables disables DDR50 Capability Support for SDCard LPSS DMA 1 Support Enables disables LPSS DMA 1 Support LPSS DMA 1 Support Enables disables LPSS DMA 2 Support LPSS 12 1 Support Enables disables LPSS 2 1 Support 22 BIOS 3 2 6 Miscellaneous Configuration The featured settings are Setting Description Available Options HPET HPET support Enables Disables HPET support in Windows XP State After G3 Set the state of System when power is re applied aft
23. t contains proprietary information protected by copyright All rights are reserved No part of this manual may be reproduced by any mechanical electronic or other means in any form without prior written permission of the manufacturer Declaration of Conformity CE The CE symbol on your product indicates that it is in compliance with the directives of the Union European EU A Certificate of Compliance is available by contacting Technical Support This product has passed the CE test for environmental specifications when shielded cables are used for external wiring We recommend the use of shielded cables This kind of cable is available from ARBOR Please contact your local supplier for ordering information This product has passed the CE test for environmental specifications Test conditions for passing included the equipment being operated within an industrial enclosure In order to protect the product from being damaged by ESD Electrostatic Discharge and EMI leakage we strongly recommend the use of CE compliant industrial enclosure products Warning This is a class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures iv Class A This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This devic
24. tion Use XD Enables or disables processor XD capability Capability Sets whether the processor should limit the maximum CPUID input value to 03h when the operating system queries it upon startup Limit CPUID gt Select Enabled to allow a processor with Intel Hyper Max value Threading technology to work with an operating system that doesn t support it Disabled is the default Bi Directional When a processor thermal sensor trips either core the PROCHOT will be driven If Bi Directional is enable external agents can drive PROCHOT to throttle VTX 2 Enables disables the CPU s VTX 2 function TM1 and TM2 Enable disables TM1 TM2 AESNI Feature Enable disables AESNI DTS Enable disables CPU Digital Thermal Sensor function Active Processor Cores Set the Number of cores to enable in each processor package Options are ALL 1 30 BIOS P States IST Enables disables processor performance states P States Boot Select the performance state that BIOS will set before OS handoff Performance Mode Turbo Mode Enables disables processor Turbo mode EMTTM enabled is required C States Enables disables processor idle power saving states C states Enhanced Enables disables P state transitions to occur in combination with C States C states Max C States Set the Max CPC state C7 C6 C1 50 Enables disables the platform to configure 50
25. uct s manual s and written materials and any accompanying hardware This limited warranty gives you specific legal rights Return authorization must be obtained from the vendor before returned merchandise will be accepted Authorization can be obtained by calling or faxing the vendor and requesting a Return Merchandise Authorization RMA number Returned goods should always be accompanied by a clear problem description vii This page is intentionally left blank viii Chapter 1 Pert Introduction 1 1 The Product Fanless Design Soldered Onboard Intel Atom Processor E3800 family Intel i210IT PCle GbE controller Dual Channels 24 bit LVDS DDI Port Extended Operating Temp 20 70 1 2 About this Manual This manual is intended for experienced users and integrators with hardware knowledge of computers If you are not sure about the description in this manual consult your vendor before further handling We recommend that you keep one copy of this manual for the quick reference for any necessary maintenance in the future Thank you for choosing ARBOR products Introduction 1 3 Specifications Form Factor Qseven CPU Module CPU Soldered onboard Intel Atom Processor E3825 dual core 1 33GHz or E3845 quadcore 1 91GHz System Memory Soldered onboard 2GB 4GB DDR3L SDRAM VGA LCD Controller SoC Integrated Intel Gen7 graphic Ethernet controller
Download Pdf Manuals
Related Search