Home

User Manual for New Firmware of the 3/3.5-inch Color

Contents

1. Shortcut Key Mappings Ring Tone bell01 waw Internal bell delay s 9 Press Y to select Bell Schedules Press Y to select New Bell Press A V and OK to select items and press OK Schedules and press OK When the setting is completed press OK to save the setting and exit Bell Status Whether to enable this bell Bell Time The bell rings automatically when it is the specified time Repeat specifies whether to repeat the ringtone Bell Type You can select between internal ringing and external ringing For internal ringing the ring tone is played by the loudspeaker of the terminal For external ringing the ring tone is played by an external electric bell that is wired with the terminal Ring Tone Bell ring Internal bell delay s specifies the duration for ringtone playing The value ranges from 1s to 999s 34 Notice Only some models have external ringing options 2 Edit and delete a Bell 5 Bell Schedules 6 All Bell Schedules 7 18 00 New Bell Schedule 18 00 y Edit Delete All Bell Schedules Options Press Y to select Bell Select New Bell Schedules and Select Edit and press OK Schedules and press OK press OK 8 Bell Status Bell Time 19 00 Delete Delete Repeat Never Bell Type Internal Bell Ring Tone bell01 way Internal bell delay s Edit a Bell the operations are Press to select Delete and press Press Y to select Yes or No and similar to those performed to add OK press OK a Bel
2. User Manual for New Firmware of the 3 3 5 inch Color Screen Version 1 0 Date April 2013 ea eM About This Manual This document describes the functions and operations of the new firmware of the 3 3 5 inch color screen Important Claim Firstly thank you for purchasing this facial and fingerprint hybrid terminal before use please read this manual carefully to avoid the unnecessary damage The company reminds you that the proper user will improve the use affect and authentication speed No written consent by our company any unit or individual isn t allowed to excerpt copy the content of this manual in part or in full also spread in any form The product described in the manual maybe includes the software which copyrights are shared by the licensors including our company Except for the permission of the relevant holder any person can t copy distribute revise modify extract decompile disassemble decrypt reverse engineering leasing transfer sub license the software other acts of copyright infringement but the limitations applied to the law is excluded a a a ew ww we we we ww we we we we we we we we we we we we we we we we we we we we we we we we we we we we we we we we we we we we we we we we we ww ww we we ws we we we we we we we we w ee ee Ce Ce 2 Due to the constant renewal of products the company can not undertake the actual product in consistence with the information in the document also any dispute c
3. Please input Enter the No using keypad and press OK 10 No 2 Access Groups Verification Mode Fingerprint Password Bad Time Period 1 1 Time Period 2 Time Period 3 Include Holidays Press Vto select Time Period 1 and press OK Notice New Group Press OK to add New Group Access Groups Verification Mode Fingerprint Password Bad Time Period 1 Time Period 2 Time Period 3 Include Holidays Press Wto select Verification Mode and press OK 11 Time Period 1 Please input 0 50 Enter the No using keypad and press OK No Fingerprint Password Bad Verification Mode Time Period 1 Time Period 2 Time Period 3 Include Holidays Press OK Verification Mode Fingerprint Password Badge Fingerprint Only User ID Only Password Badge Only JE JE JE JE J e Fingerprint Password Press A V to select Verification Mode press OK to save and return 12 No Access Groups Verification Mode Fingerprint Password Bad Time Period 1 Time Period 2 Time Period 3 Include Holidays J Press Y to select Include Holidays press OK to enable the item 1 If holiday is effective only when there is intersection between group zone and holiday time zone can the group member open the door 2 If holiday is ineffective the access control time of group member won t be affected by holiday 16 2 Edit and Delete gr
4. 19200 2 In the device menu enter Menu gt Comm gt Security and select the print mode There are 7 print modes to choose Notice 1 It will print garbled information or can t print when baud is not selected 119200 2 When print mode is mode 5 Attendance verification by prompted to select whether to print For example San punched the card at 13 24 55 on September 1 2009 there are different print formats to select shown as below Version 1 00001 San 09 09 01 13 24 55 Version 2 User No 00001 Date Time Check In 09 09 01 13 24 55 52 Version 3 San 00001 09 09 01 13 24 55 Version 4 Break In 15 24 55 01 09 2009 00001 Version 5 00001 09 09 01 13 24 55 Check In Version 6 00001 Date Check In 09 09 01 13 24 55 Version 7 User ID 00001 Check In 09 09 01 13 24 55 Note 1 Be sure that the fingerprint machine and printer Super Terminal have the same baud rate 2 If the default print format can not meet your needs you contact our business deputy our company is able to present other customized format Appendix 4 anti pass back overview Sometimes some illegal person follows the employee into the gate which will bring security problem To prevent such risk this function is enabled In record must match out record or the gate won t be open This function needs two machines to work together One is installed inside the door master machine hereinafter the other is installed out
5. Setup NC Time Period 13 Select Access Control Options Enter to Access Control Options and press OK As shown in the figure Press A W to move cursor to the item to be set If it is the input box press numeric keys on small keyboard to input the value If it is the roll box press A to switch the values After setting press menu directly to return to the last interface Press ESC to cancel setting and return to the last interface Notice 1 When time zone is set for NO or NC please set door sensor mode as None or alarm signal may come out during time zone of NO or NC 2 If time zone of NO or NC has no definition the device will prompt it and add the definition in time zone setting 5 2 Time Schedle Time zone is the minimum unit of access control option The whole system can define 50 time zones Every time zone defines seven time sections namely a week Every time section is the effective time zone within 24 hours everyday Every user can set 3 time zones or exists among the three zones It is effective if only one is satisfied Every time section format is HH MM HH MM namely accurate to minute 6 Access Control Time Schedule 01 50 Access Control Options 09 00 18 00 HH HH Monday 00 00 23 59 Holidays Tuesday 00 00 23 59 Access Groups Wednesday 00 00 23 59 Ga Combined Verification Thursday 00 00 23 59 MM Anti passback Setup Search Time Period 1 50 A onfirm a 5 Press Y to select Time
6. User Role Define User Role key to switch input method key to enter Cancel ESC Press OK to open Press Y to Select Name and press Press to switch input method and OK enter the Name then press OK 7 WN User Defined Role 1 Enable Defined Role H All Users Name Admin Eic Card EJDisplay Style LICOMM Settings ME ystem _ Personalize Press Y to select Define User Press Y and OK to select rights Role and press OK Press ESC to exit 12 5 Access Control Setting Access control option is to set user s open door time zone control lock and related device s parameters 02 21 Thursday Fg eee EE CESS Control Time Schedule Holidays Access Groups Combined Verification Personalize Anti passback Setup Mn the initial interface Press to select Access control Press W to select Access Control and press OK Options and press OK To unlock the enrolled user must accord with the following conditions Press 1 The current unlock time should be in the effective time of user time zone or group zone 2 The group where user is must be in access control or in the same access control with other group to open the door together The system default the new enrolled user as the first group default group time zone as 1 access control as the first group and the new enrolled user is in unlock if user has modified the related setting of access control the system will be changed with user s m
7. a ae 51 Appendix 1 Description of Text Input Operation Y ooocooccccnccccnccccnoconncnnoncnnoncnnnnnononenonnnnnnnnnonnnnnnannnannnnncnnnncnos 51 Appendix 2 Image Upload RUIES iii bi A a E cl AA A aaa 51 ADDENGIX S PARLIUACION A o ed oe tie 52 Appendix AAD ASS Daconte 53 Statement on Human Rights and Privacy nissan costra id ltd id 56 Environment Friendly Use Description oooocooconioonncconccnonncnanocnnnocanononnononncnnancnnanocnnrnnnaronnanonnnanannnnaninnaninns 57 1 Instruction for Use 1 1 Finger Placement Recommended fingers The index finger middle finger or the ring finger the thumb and little finger are not recommended because they are usually clumsy on the fingerprint collection screen 1 Proper finger placement The finger is flat to the surface and centered in fingered guide 2 Improper finger placement Not flat to the surface Off center Slanting Off center 1 2 Verification Modes 1 2 1 1 N Fingerprint Verification The terminal compares current fingerprint collected by the fingerprint collector with all fingerprint data on the terminal Press your finger on the fingerprint collector by adopting the proper finger placement For details see 1 1 Finger Placement 2013 02 22 Friday ES 2013 02 22 Friday User ID 2 pr si Verify Fingerprint Verify Fingerprint Error Invalid fingerprint successfully verified Failed to verify When verification successful an When ve
8. and press OK swiping area Clean Card Data Operation succeeded tn Operation succeeded Put the card in the induction area waiting for device to delete all the information in the card If the card data has been stored in the device the device will remind you whether to delete the information in the device or not Yes is to delete the user s fingerprint and information in the device No is to keep the information 6 4 Copy card information Copy card information to the device after copy the fingerprint is still in the card then press fingerprint attendance directly on the device with no need of using Mifare card IC Card 5 l Copy Card Data 6 Copy User Data Only Enroll as ID Card Copy User Data Only Please swipe badge Operation Enroll as Fingerprint Card Copy User Data 4nd Fingerprint Clean Card Data Y Copy Card Data IC Card Options Press Y to select Copy Card Data Select Copy User Data Only and Swipe your ID card properly in the and press OK press OK swiping area Copy User Data Only Operation succeeded Copy User Data And Fingerprint Press Y to select Copy User Data And Fingerprint the operations are similar to those performed to Copy Card Data ES Operation succeeded 21 6 5 Set card parameter value Set password of Mifare card and decide whether the information should be saved or not IC Card Options Verify ID Card Only If this parameter
9. can go out but cannot come in When the master machine is set as out in anti pass back if the user wants to come in and go out normally if his recent record is out and in then his next record must be in and out operation 1 Select model Master machine Machine with Wiegand in function except for F10 Reader Slave machine Machine with Wiegand Out function 2 Menu setting Access Control Anti passhack Setup Time Schedule Device Status Holidays Combined Verification Press Y to select Anti Passback Enter to Anti Passback Setup Setup and press OK nterface Anti pass back Out anti passback If the device does not store the record of a person the person can check out after the first comparison 54 In case that a person s record has been stored in the device an alarm will be raised when the person checks out without the corresponding entry record in the device If only out anti passback is enabled entry is allowed at any time In anti passback If the device does not store the record of a person the person can check in after the first comparison In case that a person s record has been stored in the device an alarm will be raised when the person checks in without the corresponding exit record in the device If only in anti passback is enabled exit is allowed at any time In out anti passback If the device does not store the record of a person the person can check in and out after the first comparison
10. is set to YES you pass the Te verification only after card verification If this parameter is set to NO you Card Data Storage Mode METETE need to verify your password or fingerprint after card verification IC Card Passcode Aa Card Data Storage Mode Decide whether to save the enrolled information Stored Fingerprint Count jm to the device when enrolling card or fingerprint card If Not to save is selected user information is saved to the card only If Only user is selected the employee ID and card number are saved to the device If User fingerprint is selected the employee ID card number and fingerprint are saved to the device In the latter two modes data is saved to both the card and the device IC Card Passcode After the password is set the device will write password into the enrolled fingerprint card Then the fingerprint card can only be used on this device Stored Fingerprint Count Used to set the number of fingerprints saved to a card Up to 10 fingerprints can be saved Note When the device serves as access control machine to provide the high level access control function the user information must be saved to the device for authentication purposes For details see 5 Access Control Setting 22 7 Communication Setting Set parameters for communication between the device and a PC The parameters include the IP address gateway subnet mask baud rate machine ID and login password COMM Setti
11. jpg X is the user s employee ID which is not limited in the number of digits Images must be in jpg format 2 Advertising image Create a new directory named advertise in the root directory of disk U and place advertising images into the directory A maximum of 20 images can be stored and the size of each image cannot exceed 30 KB There are no restrictions on the image name and type 3 Wallpaper Create a new directory named wallpaper in the root directory of disk U and place wallpapers into the directory A maximum of 20 wallpapers can be stored and the size of each wall paper cannot exceed 30 KB There are no restrictions on the image name and type Note If the size of a single user photo or attendance photo is 10 KB or less a total of 10 000 photos can be stored 51 Appendix 3 Print function External printer Explain This function is designed for a serial port printer only the parallel printer is unavailable The printing content output via RS232 After a user is verified the result will be sent out through serial port If device connect with the printer the result can be printed directly can also use the Super Terminal to view the output content Device connect with Device printer printer 2 TXD lt gt 3RXD 3 RXD lt gt 2 TXD 5 GND lt gt 7 FG RS232 Pin line order 1 5 Connection Printer Instructions 1 In the device menu press Menu gt Comm gt RS232 485 and select baud rate as
12. list photos saved in device to U disk The format of photo is JPG Download work code used to save work IDs on the device to a USB drive 11 2 Uplad USB Manager Upload Download User Portrait Download Options Upload work code short Message screen Saver wallpaper Press Vto Select Download and Press Y and OK to select the item press OK to be Uploaded 40 Upload User Data Upload the message stored in a USB disk to the terminal Upload User Portrait Upload the JPG documents that are named after the user IDs and stored in a USB disk to the terminal so that user photos can be displayed after the employees pass the verification Upload work code used to upload work IDs in a USB drive to the device Upload Short Message used to upload short message in a USB drive to the device Upload Screen Saver Upload the JPG documents with ad_ as initial letters of document names stored in a USB disk to the terminal After the upload these pictures can be displayed on the initial interface of the terminal For details on picture specifications see Appendix 2 Upload Wallpaper Upload the JPG documents with 1 10 jpg as initial letters of document names stored in a USB disk to the terminal After the upload these pictures can be displayed on the interface of the terminal For details on picture specifications see Appendix 2 11 3 Download Options You can encrypt the data in a USB drive and set to delete data a
13. to save the setting and exit Wiegand Format The system has two built in formats Wiegand 26 bits and Wiegand 34 bits Wiegand Bits specifies the number of bits occupied by the wiegand data pulse width Pulse width is 100 microseconds by default which can be adjusted from 20 to 100 Pulse interval lt is 1000 microseconds by default which can adjusted between 200 and 20000 ID Type specifies the content of the wiegand input signal which can be an employee ID or a card ID based on your requirement Format Details displays the information defined by various bits of the selected wiegand format Wiegand26 Wiegand Format Wiegand26 Wiegand Bits 26 Wiegand 26format E Even parity O Odd parity C Card Number 01111111111110000000000000 Wiegand 26 Even parity bit 00000000000001111111111110 Wiegand 26 Odd parity bit Confirm OK 7 7 2 Wiegand OUT Wiegand Format The system has two built in formats Wiegand 26 bits and Wiegand 34 bits Failed ID defines the output value for user authentication failures The output format is determined by the setting of Wiegand format The value ranges from 0 to 65535 Site code Similar to device ID But the code is specified by user Different device can be repeated With range of 0 255 pulse width Pulse width is 100 microseconds by default which can be adjusted from 20 to 100 Pulse interval lt is 1000 microseconds by default which can adjusted between 200 and 20000 ID Type specifies th
14. Attendance Log Alert Expiration Rule Cyclic Delete ATT Data Disabled Press W to select Attendance Press A V and OK to select items and press OK When the setting is completed press OK to save the setting and exit Duplicate Punch Period m If a user s attendance record already exists and the user punches in again within the specified period unit minute his her second attendance record will not be stored Value scope 1 60 minutes Camera Mode when the employee is in attendance record grasp photo and save it It is aimed at the setting of all employees 30 There are 5 modes No photo there is no photo taken during attendance record Take photo no save take photo but not save photo during attendance record Take photo and save take photo and save photo during attendance record Save on successful verification When an employee passes the work attendance check a picture of the employee is taken and saved Save on failed verification When an employee fails the work attendance check for three times consecutively a picture of the employee is taken and saved Display User Photo whether the picture of a user is displayed when the user passes the work attendance check Alphanumeric User ID whether employee IDs can contain letters Employee IDs with letters help classify employees Attendance Log Alert When the available space is insufficient to store the specified number of attendance records the FFR terminal will autom
15. Enroll 4 Enroll as ID Card Enroll as ID Card Please input user ID Continue OK Cancel ESC Enter the user ID using keypad Swipe your ID card properly in the then press OK swiping area on the initial interface Press to Select Users and press User ID 1 Please swipe badge IC Card Enroll as Fingerprint Card Clean Card Data Copy Card Data IC Card Options Select Enroll as ID Card and press OK Enroll as ID Card Operation succeeded bn Operation succeeded Remarks If the number you are deleting already exists on the device a message asking you whether to replicate information to the card is displayed 2 Verification Swipe your ID card properly in the swiping area When the verification is successful the device will give prompt 2013 02 26 Tuesday UserID 1 Name Please enter user access control option Verify Badge Successfully verified to modify the verification mode as RF or verification won t be successful 6 2 Enroll as Fingerprint Card Enroll fingerprint and write fingerprint into card Operation 1 Enroll IC Card Enroll as ID Card Enroll as Fingerprint Card be Pl Clean Card Data Copy Card Data IC Card Options Press Y to select Enroll as Fingerprint Card and press OK Enroll as Fingerprint Card Press finger 2nd time Place the same finger on the fingerprint collector for three consecutive ti
16. In case that a person s record has been stored in the device an alarm will be raised when the person checks in or out without a corresponding exit or entry record in the device No anti passback The door will be opened only when a person is authenticated by the master host Device status Entry control When a device is used to control entry the device saves only the entry records Exit control When a device is used to control exit the device saves only the exit records None When the status of a device is set to None the anti passback function is disabled on the device 3 modify device s Wiegand output format When the two devices are communicating only Wiegand signals without device ID are received Enter device menu gt communication option gt Wiegand option or enter software basic setting device management Wiegand to modify defined format as wiegand26 without device ID 4 enroll user The user must be on master machine and slave machine at the same time and user PIN must be the same Therefore it is necessary to enroll user on master machine and slave machine at the same time 5 connection instruction Wiegand communication is adopted for master machine and slave machine Refer to the following for connection Master Slave INDO lt gt WDO 55 Statement on Human Rights and Privacy Dear Customers Thank you for choosing the hybrid biometric products designed and manufactured by us As a world renowned provider of bio
17. Or there is no alarm signal Alarm on Password If select Yes when user use password verification mode alarm signal will come out Or there is no alarm signal Alarm Delay s After duress alarm gets started the alarm signal is not output directly But it can be defined After some time alarm signal will be generated automatically 0 255 seconds Operation Press A Wto move cursor to the item to Access Control Duress Options be set If it is the input box press numeric Time Schedule Holidays sae ana eae keys on small keyboard to input the value If it is the roll box press lt to switch Access Groups Alarm on 1 N Match the values After setting press menu Combined Verification Alarm on Password directly to return to the last interface Anti passback Setup Alarm Delay s Press ESC to cancel setting and return to the last interface Press Y to select Duress Options Enter to Access Control Options and press OK As shown in the figure 18 6 IC Card management Support Mifare non touch intelligent card with working frequency of 13 56MHZ Integrate fingerprint attendance to other systems and support multi verification mode to meet the demands of different people Operation IAA Thursday wr 7 x il 1 User Role H Check In System Personalize Press Mi OK 6 1 Enroll as ID Use Mifare card as ID card Only card number is needed to enroll Operation 1
18. Schedule Use numeric keys to search for a Press Y to select a time option and press OK time period in the range from 1 to and press A V to set time 50 Press Y to select the item to After setting a period of time press be set and press OK OK to save the setting and exit If end time is smaller than start time 23 57 23 56 the whole day is forbidden If end time is bigger than start time 00 00 23 59 itis effective section Effective time zone for user unlocking 00 00 23 59 or end time is bigger than start time Notes The default time period number 1 indicates all time access that is newly registered users are unlocked 5 3 Holiday setting Special access control time may need during holiday It is different to modify everybody s access control time So a holiday access control time can be set which is applicable for all employees If holiday access control time is set user s open door time zone during holiday subject to the time zone here Access Control Holidays Holidays Access Control Options Time Schedule All Holidays Start Date 01 01 End Date 01 01 Access Groups Time Period 1 Combined Verification Anti passback Setup 14 Press Y to select Holidays and press OK Enter the No using keypad Press OK Holidays No 1 start Date 10 01 End Date Time Period 1 Press Wto select Time period and press OK Include Holidays Time Period 1 Time Period 1 10 1 10 6 T
19. Time System Info To check the current device capacity device information and its firmware information Menu Tree New user Time Schedule s Users lt All Users Holidays U Display Style Access Groups User Defined Combined User Role p Role Verification eee Access Control Control a vers Enroll as ID Card Duress Options pol p Anti passback Fingerprint Card al Setup Clean Card IC Card Data Enhernet Copy Card Data Serial Comm IC Card PCC Options onnection COMM gt lt Cellular Data Settings Network Date Time Wireless Network Attendance System gt lt ADMS User Interface Fingerprint Wiegand Setup Personalize lt MOE Camera 2 Bell Schedules Reset Punch State Options U USB Upgrade Shortcut Key Delete Data Mappings Da
20. WIFI OK dlink system Enter a password press Y to select Connected as shown in the figure Connected the initial interfaceas Confirm OK and press OK shown in the figure 7 6 ADMS This submenu is used to connect the Webserver related settings such as Webserver IP address port settings and whether to enable proxy settings Enable Domain Name When the domain name mode is enabled you access a website using a domain name in the format of http otherwise you must enter an IP address for website access Server Address P address of Webserver Server port Port used by Webserver Enable Proxy Server When you enable the proxy function set the IP address and port number of the proxy server This option indicates whether to use a proxy IP address You may choose to enter the proxy IP address or the server address for Internet access whichever you like COMM Settings Ethernet Serial Comm server Address PC Connection server port 6061 Cellular Data Network Enable Proxy Server rr Wireless Network 26 7 7 Wiegand option 7 7 1 Wiegand IN Operation COMM Settings Wiegand Setup Wiegand Options on Wiegand Format Wiegand26 Serial Comm PC Connection Wiegand OUT Cellular Data Network Wiegand Bits 26 Wireless Network Pulse Width us ADMS Pulse Interval us ID Type press Y to select Wiegand Setup press OK Press A V and OK to select items and pross OI When the setting is completed press OK
21. atically generate an alarm Value scope 1 99 Cyclic Delete ATT Data specifies the maximum number of attendance records that can be deleted at a time when the number of attendance records reaches the upper limit This function can be disabled otherwise the value ranges from 1 to 999 Cyclic Delete ATT Photo specifies the maximum number of attendance pictures that can be deleted at one time when the number of attendance pictures reaches the upper limit This function can be disabled otherwise the value ranges from 1 to 99 Confirm Screen Delay s specifies the time for displaying the authentication result The value ranges from 1s to 9s Save Illegal Verification Record Save the Illegal Verification Record generated in Illegal Time Zone and Illegal Combination or not when the Access Control was Enable Expiration Rule You can select one of the three conditions retaining user information and not saving attendance records retaining user information and saving attendance records deleting user information 8 3 Fingerprint Fingerprint Date Time Attendance 1 N Match Threshold 35 FP Sensor Sensitivity Medium Reset 1 1 Retry Times USB Upgrade Fingerprint Algorithm ZKFinger X10 0 Fingerprint Image show for match Press W to select Fingerprint Press A V and OK to select items and press OK When the setting is completed press OK to save the setting and exit 1 1 matching threshold value The similarity of ID finge
22. aused by the difference between the actual technical parameters and the information in this document Please forgive any change without notice ee a we we we ww ws w O eee ee ee we we we we we we we we we we we we we we we we we we we we we we we we we we we we we we we we ww ww we we www we we we we we we we we we we we we ww e ww ww ww ww www ww ws ws ee ee OP About this manual gt Not all the devices have the function with The real product prevails gt The photograph in this manual may be different from that of the real product The real product prevails contents Y otc iaUleii e gue se eee te aT he he er ee ee a 1 Ace Mls satecciunis beaded ial aan ieon en A e IM 1 T2 VW ONIN CAUORWIOGES cr ad cee escent cee 1 1 2 1 1 N Fingerprint A A AM ennenen 1 122 oo AAA a a E a Gamanaains 1 1 2 3 Password Verification iia Ml Ay di AA be detavees 2 Ne 2 ALND Gard Vonaton io oia ai aia 2 2 Wali VIC naaa as O O ute songs ad dls 4 DISC Management ri 6 Soo EAS AAA A E MM AO 6 De lek Eneng a Us Di 6 312 HTN A INAIING casita ii ia 6 Roo AA ee guteatie donde iaa a a a aetna aA a eendtnh 7 3 1 4 ENTONNO a Fingerprint ii ar a A A AA hid a aad e eta T 3 120 EMON aN D Card AAA A e a A eee 8 OJOS ROWING lt a Fassword AE Nee a e a E 8 L Ao AM PA 8 3 sO ACCESS COMUOLIR a A a od 8 32 Quera Userin ANS tr A A Ds 9 3 2 1 Query by WigPT UD and Name occooccccoocconocococononocononononanoconanononanononononono
23. ccess Group Please input 1 99 Enter the user group using keypad then press OK to return 9 Scces S 1 Access Control verification Mode Fingerprint Password Bad Duress Fingerprint Undefined Apply Group Time Period Press Y to select Duress Fingerprint and press OK Access Control CCess Grou p 1 Verification Mode Apply Group Mode Duress Fingerprint 1 Apply Group Time Period Time Period 1 Time Period 2 When select OFF Press Y to select Time period 1 used others 02 21 Thursday Main Menu Zt User Role Access Control All Users 30 Display style us Check In AT gt Sf ms p a a COMM System Personalize Data settings Press Fon the initial interface Select Users and press OK Press W to Select All User and press OK 3 2 1 Query by User ID and Name eS gs fae Press on the search lvl i interface to change an input i ark 4 Jack method and press letter keys of the numeric keyboard to search by name June Y ES GRE Enter the user ID using keypad to The cursor to the user to be queried query to view all users 3 2 2 Edit and delete a User CO EEOQOQQ2 lt EG E l Edit 1 Joe Edit User ID 1 Joe 2 Delete Name Joe David y User Role Normal User Mark 4 Fingerprint 3 Jack Aa Password Press Y to select a User and Press OK to enter User Info The User ID cannot be modified press OK interface and the other op
24. citizens of the People s Republic of China is prohibited infringement of individual privacy is prohibited 2 The personal dignity of citizens of the People s Republic of China is inviolable 3 The home of citizens of the People s Republic of China is inviolable 4 The freedom and privacy of correspondence of citizens of the People s Republic of China are protected by law At last we stress once again that biometrics as an advanced recognition technology will be applied in a lot of sectors including e commerce banking insurance and legal affairs Every year people around the globe suffer from great loss due to the insecurity of passwords The fingerprint recognition actually provides adequate protection for your identity under a high security environment 56 Environment Friendly Use Description The Environment Friendly Use Period EFUP marked on this product refers to the safety period of time in which the product is used under the conditions specified in the product instructions without leakage of noxious and harmful substances The EFUP of this product does not cover the consumable parts that need to be replaced on a regular basis such as batteries and so on The EFUP of batteries is 5 years Names and Concentration of Toxic and Hazardous Substances or Elements Toxic and Hazardous Substances or Elements Parts Name Cd Cr6 PBB PBDE g Chip resistor Chip capacitor Chip inductor Chip diode ESD components Buz
25. d Duplicated punch Enter the user ID using keypad on Enter password and press OK When verification successful an the initial interface Then press OK interface shown above 2013 02 22 Friday Error Invalid password Failed to verify When verification failed an interface shown above Notes If the device says Invalid ID enter the password again You can try another 2 times by default The repeated times can be set in 8 3 Fingerprint option If it fails after 2 times return Step 1 for second operation 1 2 4 ID Card Verification Only the products with a built in ID card module support the ID card verification The products with a built in ID card module support the following two verification modes ID Card Only Users only need to swipe their ID cards for verification ID Finger Verification After passing the ID card verification you also need to perform finger verification For the settings of these two verification modes see 6 5 IC Card Settings 1 1D Card Only 1 If you have your ID card number enrolled in the system you can pass the verification by swiping your ID card at the swiping area in a proper way 2013 02 26 Tuesday E 2013 03 13 Wednesday UserID 1 Name Verify verify Fin gerp rint Card verify Badge Successfully verified Failed to verify If the verification is successful an If the verification is not successful an interface as shown above interface as sho
26. d Time 00 00 MY Start Time 00 00 Daylight Saving Mode By date time End Month Daylight Saving Setup End Week 1 Open Daylight Saving Time Set time in By date time Set time in By week day Daylight Saving Mode You can select the date mode month day hour or week mode month weekday hour By default the date mode is used Daylight Saving Setup used to set the DST start time and end time Description of the date mode and week mode 1 If the month when DST starts is later than that when DST ends DST spans two different years For example the DST start time is 2012 9 1 4 00 and the DST end time is 2013 4 1 4 00 2 Assume that the week mode is selected and the DST starts from Sunday of the sixth week of September in 2012 According to the calendar September of 2013 does not have six weeks but has five weeks In this case in 2013 DST starts at the corresponding time point of the last Sunday of September 3 Assume that the DST starts from Monday of the first week of September in 2012 According to the calendar the first week of September in 2012 does not have Monday In this case the DST starts from the first Monday of September in 2012 8 2 Attendance Attendance Attendance Date Time Cyclic Delete 4TT Data Disabled Camera Mode Take photo and save Cyclic Delete ATT Photo Disabled Fingerprint Display User Photo Confirm Screen Delay s 3 Reset Save Illegal Verification Re ong Alphanumeric User ID USB Upgrade
27. e assigned some other menu functions in addition to the functions available for a common user When logging in as a super administrator you have the rights to assign menu functions to a customized role 3 1 4 Enrolling a Fingerprint 4 User ID 1 New User Enroll Fingerprint Enroll Fingerprint 1 Press finger 2nd time Name Joe User Role Normal User Badge Number Please select the finger to be enrolled Press Y to select Fingerprint and Place your finger on the fingerprint Place the same finger on the press OK sensor properly For details see fingerprint collector for three 1 1 Finger Placement consecutive times correctly Enroll Fingerprint 1 Enrolled successfully Enrollment succeeds If the enrollment fails the system will display a prompt message and return to the Enroll Fingerprint interface In this case you need to repeat the operations of step 2 3 1 5 Enrolling an ID Card Y 4 User ID 1 m Enroll Badge Number New User Badge Number 4010195754 Name Joe User Role Normal User Fingerprint 1 Badge Number Press Y to select Badge Number Swipe your ID card properly in the Read Successfully and press OK swiping area 3 1 6 Enrolling a Password 4 _ 2 New User 5 Password User ID 1 Please input Name Joe User Role Normal User Fingerprint 1 Badge Number 4010195754 Password Press Y to select Password and Enter a password using ke
28. e output content for successful user authentication You can select the employee ID or card ID Format Details displays the information defined by various bits of the selected wiegand format Operation 27 5 Wiegand IN Wiegand Setup press OK Wiegand Options Wiegand Format Wiegand26 Failed ID 0 Site Code Pulse Width us Pulse interval us Press A V and OK to select items When the setting is completed press OK to save the setting and exit 28 8 System Set system parameters to meet user s demand as many as possible Including the Date Time Attendance Fingerprint and so on 02 21 Thursday Attendance Fingerprint Reset Check In USB Upgrade Me Press on the initial interface Select system and press OK Select Date Time and press OK 8 1 Date Time Date Time Attendance set Time 11 27 46 Fingerprint 24 Hour Time ON Reset Date Format YYYY MM DD USB Upgrade Calendar Type Gregorian Daylight Saving Time Select Date Time and press OK Press A V and OK to select items When the setting is completed press OK to save the setting and exit Set Date Time This parameter is used to set the date and time of the FFR terminal 24 Hour Time This parameter is used to set the time display mode of the initial interface Select ON to adopt the 24 hour display mode Select OFF to adopt the 12 hour display mode Date Format This parameter is used to set the format o
29. e selected print information 43 14 SMS SMS is similar to notice The operator can edit the notice content in advance and make it into SMS displayed on the screen SMS includes common SMS and individual SMS If common SMS is set will be displayed in information column at the top of standby interface in the specified time If individual SMS is set the employee who can receive SMS can see SMS after successful attendance 02 21 Thursday short Message Public Messages C hec k n Drafts Message Options Attendance Search n the initial interface PressP to select Short Message Select New Message and press and press OK OK Press 14 1 Add a SMS 1 Enter the short message on the keyboard New Message Message Hello For details of enter start Date 2013 02 22 name see Appendix 1 Start Time 12 27 Description of Text Input Expired Time m 60 Message Type symbol BD 1 2 3 47 37 Dl 1 BP gt Select Message and press OK Press to switch input method and enter the message then press OK 2 Set the time when SMS comes into effect New Message start Date start Time Expired Time tm Message Type Select Start Date and press OK Enter the date or Press A V to select the date then press OK 3 Set Expired time m SMS appears in the effective time After the effective time it won t appear Notes For public short messages the effective period is also the disp
30. e the setting and exit Wallpaper Users can choose wallpaper to display on the screen Language You can select a language for the device based on your requirements Lock power Key To prevent hostile power off select whether to lock power off or not disable the power is off 3 seconds after pressing power off enable it is ineffective after pressing power off Menu Screen Timeout s The device will display the main interface automatically when no operation is performed on a menu within the menu timeout time This function can be disabled otherwise the value ranges from 60s to 99999s Idle Time To Slide Show s The advertisement picture is displayed when no operation is performed on the main interface within the waiting time This function can be disabled otherwise the value ranges from 3s to 999s Slide Show Interval s This parameter is used to set the picture cycle interval value scope 0 999 seconds Idle Time To Sleep m This parameter is used to specify a period after which the device is put in sleep mode if no operation within this period You can wake up the device from sleep by pressing any key or touching the screen Numerical range in 1 30 minutes the factory default for 3 minutes Main Screen Style used to set where and how the clock and status key are displayed on the main screen Company Name When a company name is specified you can choose whether to print the company name in print setting Notes Company
31. eatest advantage of WIFI is its high transmission rate up to 11Mbps WIFI also features long transmission distance and excellent compatibility with various existing 802 11 DSSS devices IEEE 802 11b is a radio based variant of IEEE 802 11 The bandwidth of IEEE 802 11b can be up to 11 Mbps and automatically adjusted to 5 5Mbps 2Mbps and 1Mbps depending the signal strength and interference level thus effectively ensuring network stability and reliability Major advantages High transfer speed and reliability The communication distance can be up to 305 m in an open area and 76 m to 122 m in an enclosed area WIFI can be conveniently integrated with the existing wireline Ethernet making the networking cost even lower Our terminal is also WIFI capable It supports either built in or external WIFI module to implement wireless data transmission over the WIFI WIFI Press OK to open or close WIFI Operation 25 COMM Settings Wireless Network Wireless Network Ethernet Serial Comm dlink 123456 PC Connection TP system TP system Cellular Data Network think think TP LINK_545DD0 TP LINK_545DD0 ADMS dlink system dlink system Press Y to select Wireless Press WIFI can open or close the Pres Y to select dlink 123456 and Network and press OK function press OK 7 dlink 123456 Wireless Network 02 27 Wednesday 5 ecu rity E W P 4 2 P 5 K Signal Strength Medium Password TP system yj123456 think TP LINK_545DD 0 Connect to
32. erations are similar to those performed to add a user 77 rg User 1 Joe Delete 1 Joe Delete User Delete Delete Fingerprint Only user defined Delete Password Only administrators are cleared when Delete Badge Number Only user rights are deleted Press V to select Delete and Press Y to select item need delete press OK and press OK 10 3 3 Display Style Press A wen A Us gt E E All Users User Role Access Control 02 21 Thursday pa Check In COMM System Personalize settings M n the initial interface Select Users and press OK Press Y to Select Dispiay Style and press OK Display Style All Users All Users Multiple Line EL Davie 2 David Mixed Line E mark 3 Mark Jack Jack June June Press Y to select dispiay style and Single Line Multiple line press OK to return gt G All Users David 5 June Mark 4 Jack Mixed Line 11 4 User Role Set the rights of a user defined role that is rights to menus 02 21 Thursday Man mMenu User Role User Defined Role 2 pss os pese user Defined Role 3 Check In a COMM tem Personalize settings Press Hon the initial interface Press to select User Role and Press W to select User Defined press OK Role 1 and press OK 5 A User Defined Role 1 User Defined Role 1 Enable Defined Role Please input Name User Defined Role 1 Define
33. erprint Algorithm ZKFinger X10 0 ZKTeco Inc Manufacturer Manufacture Date Device information 50 Firmware Info Bio Service Wer 1 2 100 20130218 er 1 0 0 20130216 Push Service Ver 1 0 0 20130216 standalone Service Dey Service Ver 1 0 100 20130216 Firmware information Appendix Appendix 1 Description of Text Input Operation The device can recognize English letters symbols and numbers Press to display the input method and press again to switch the input method Press to enter a space Press ESC to exit the input method Description of entry of English letters and symbols for example creating a short message Aa Aa Aa GH Press to display the input Press again to switch the input If necessary you can press 4 twice in method method Select Aa a or A for using succession to select H uppercase and lowercase letters based on requirements Aa symbol a e O TM Es de 47 ur 0d 7 BP gt Press 2 to select a Finish the text Press to enter a space if Press to switch to the symbol input input in the same way necessary method and press 6 Select When you complete the input press ESC to exit Appendix 2 Image Upload Rules 1 User photo Create a new directory named photo in the root dire ctory of disk U and place user photos into the directory A maximum of 8 000 photos can be stored and the size of each photo cannot exceed 15 KB The image name is X
34. esad aad otk eaiitass tehae 27 Tchad Wiegand OUT sasise A A AAA E 27 OVON an a a E E A E nesta onan te 29 OO ALC TINE e E E E O 29 02 Atend ANC Sr e E oia uae tGetd Gute c 30 A O 31 TOS A oe tae eae etree cain Mets dat ae tagedncn S trae cots aree dul ee racemes bata a 32 OO WS UDO AAA IA A A A A A o 32 O Personalize eee et ee tia ee ee ee errr do 33 9 1 User MMIC aCe a a a bathe a E BoM eile lav 33 og Ol A E E E AE eR re E ony MT ae et errr reer Ge OO 34 9 9 Bello cnc atleti ii ytd dc oats undead 34 0 A PUNCN State OPON Snap atl 36 9 5 SNOMCUEKEY Map PINGS cian dd tia O Web wav ia bila ia leat 36 10 Data Manage satchel eee ee A a E 37 101 Delete Data ii O UA oma dois 37 STOLZ AC KU LIB AL PMI PPP POUR ueno ASS 39 10 3 Restore Dada A ao 38 M1 USB Mandela NN IR 40 DUD OW INO ai iz 40 MA A A A A A els Shenae es ceticedt 40 11 3 Download Options aa ii ae A A A Ad A is 41 IZ Attendance CACA a O tia A 42 o A IEEE E A E ET POA 43 os A AA 44 ARS A Redeem cee Anand ees es 44 14 2 Public Personal arD IMSS aaa 45 14 3 Message Optisia or ide 45 14 4 Employes Che CO odon ld e cetro 45 AA A E Ann A 47 TO LAO AM COLO it tae N sarees ue soma era eee ava ne vara ates ene enemas 47 192 AINE OCS di aaa 47 o a e A e e e OUT SI tania baniisesaiauatuntvoalaneub ante 48 e A A A nae iia needa 49 17 System NATO matones 50 O acct wea cae eee tiene ll Richaed daa ee ose nein te eee grade eatin ial cues aulherateocininiiad xt bec Seanad
35. est Camera M n the initial interface PressP to select Diagnostics and Press to select the one you want press OK to see and press OK Press Test All The terminal automatically tests the LCD voice sensor keyboard and clock press OK to continue and press ESC to exit Test LCD The terminal automatically tests the display effect of the color TFT display by displaying full color pure white and pure black and checks whether the screen displays properly You can continue the test by touching the screen or exit it by pressing ESC Test Voice The terminal automatically tests whether the voice files are complete and the voice quality is good by playing the voice files stored in the terminal You can continue the test by touching the screen or exit it by pressing ESC Test Keyboard The terminal tests whether every key on the keyboard works normally Press any key on the Keyboard Test interface to check whether the pressed key matches the key displayed on screen The keys are dark gray before pressed and turn blue after pressed Press ESC to exit the test Test Fingerprint Sensor The terminal automatically tests whether the fingerprint collector works properly by checking whether the fingerprint images are clear and acceptable When the user places his her finger in the fingered guide the collected fingerprint image is displayed on the screen in real time Press ESC to exit the test Test Camera The device automatically t
36. ests whether the camera works properly by checking whether the collected images are clear and acceptable Press ESC to exit the test Test Clock RTC The terminal tests whether its clock works properly by checking the stopwatch of the clock Touch the screen to start counting and touch it again to stop to check whether the counting is accurate Press ESC to exit the test 49 17 System Information You can check the storage status as well as firmware information of the terminal through the System Information option Main Menu System Info Device Info Firmware Info Work Code Diagnostics System Info M4 Press Y to select the one you want to see and press OK Press on the initial interface PressPto select System Info and press OK Device Capacity The number of enrolled users administrators passwords the total fingerprint storage capacity and occupied capacity ID cards and attendance capacity are displayed respectively Device info The Device name serial number MAC Address Fingerprint Algorithm Manufacture and Manufacture date are displayed on the device interface Firmware info The Firmware version Bio Service Push Service Standalone Service and Dev Service are displayed on the firmware info interface Device Capacity Admin User Password Fingerprint used max Badge used max ATT Record used max Device Capacity Device Info serial Number ds MAC Address 00 17 61 7f 26 ca Fing
37. f the date displayed on the all interface of the FFR terminal Calender Type The device support the three calender type like Gregorian Iran Gregorian and Iran Lunai You can modify it if it is necessary Daylight Saving Time DLST also called Daylight Saving Time is a system to prescribe local time in order to save energy The unified time adopted during the system date is called DLST Usually the time will be one hour forward in summer It can make people sleep early and get up early It can also reduce lighting to save power In autumn the time will be recovered The regulations are different in different countries At present nearly 110 countries adopt DLST To meet the demand of DLST a special option can be customized on our RF Card Time amp Attendance recorder Make the time one hour forward at XX minute XX hour XX day XX month and make the time one hour backward at XX minute XX hour XX day XX month if necessary Operation 29 1 Set DLST as enable 2 Input DLST start time and end time For example if 08 00 April 1 is set the device enter DLST and the time will be one hour forward If it is 08 00 August 1 the device will reset normal time 3 Press OK to save setting Press ESC to exit without saving Date Time Daylight Saving Setup Daylight Saving Setup 24 Hour Time ON a Aea Toma YYYY MM DD fl Start Time oo 00 Mall Start Week Calendar Type Gregorian End Date 00 00 Start Day Sunday on En
38. fault time zone 2 Select OFF set user unlocking time If group time zone is not used others unlocking time won t be affected 4 New User User Role Normal User Fingerprint 1 Badge Number 4010195754 Password ld User Photo Access Control Role Press Y to select Access Control Role and press OK 7 Access Control verification Mode Apply Group Mode Undefined Duress Fingerprint Apply Group Time Period Press Y to select verification mode and press OK Duress Fingerprint JE Please select duress fingerprint Press Pto select enrolled fingerprint and press OK 3 2 Query a User in All User To facilitate administrators to locate a user quickly from a large number of enrolled users the FFR terminal enables Access Control Access Group 1 Verification Mode Apply Group Mode Undefined Duress Fingerprint Apply Group Time Period Press OK enter to Access Group interface Verification Mode Apply Group Mode Fingerprint Password Badge Fingerprint only User ID only Password Badge only Press W to select verification type and press OK 11 Access Group 1 Access Control Verification Mode Apply Group Mode Duress Fingerprint 1 Apply Group Time Period Press Y to select Apply Group Time Period press OK to select to Whether the user use his group s default time zone user query by his her User ID and Name Location Search 6 A
39. fter being downloaded When download the attendance records you can also set the calendar type displayed in the attendance time The device support hree calendar types which are Gregorian Iran Gregorian Iran Lunar to choose 4 opo E USB Manager Download Options Delete ATT Data USB Manager Gregorian Press Y to Select Download Press Y and OK to select items Options and press OK When the setting is completed press OK to save the setting and exit 41 12 Attendance Search Employee s attendance record will be saved in the device For query convenience query record function is provided 1 Attendance Record 2 21 Thursday Attendance Search Attendance Photo Blacklist 4 TT Photo Check In Attendance Search Hi on the initial interface Press to select Attendance Press to select Attendance Record Search and press OK and press OK Press Time Range Personal Record Search Please input empty for all data 16 10 15 41 Yesterday 1 A T h s we e k Last week This month SUMMA CancemeSe Last month Prev Personal Record Search Next Personal Recor Enter the user ID then press OK Press to select Time and press The records in accordance with the OK conditions will be displayed User ID Enter the user ID of the employee to query If this field is left blank you can query the attendance records of all the employees If you enter a user ID you can query the attendance record of t
40. ge within the specified time period the main interface displays the short message icon Ed in the upper right corner and displays the content of public short messages in scrolling mode in the lower part so that all employees can view the information The content of private short messages for a user is displayed when the user is authenticated 2013 02 22 Friday Hello 2013 02 22 Public message User authentication is successful after the show users messages 46 15 Work Codex Employees salaries are subject to their attendance records Employees may be engaged in different types of work which may vary with time periods Considering the salaries vary with work types the FFR terminal provides a parameter to indicate the corresponding work type for every attendance record to facilitate rapid understanding of different attendance situations during the handling of attendance data 02 21 Thursday i 7 Main Menu _ Work Code All Word Codes Ba Work Code Options Work Code Diagnostics System Info Mon the initial interface Press to select Work Code and Press Y to select New Work Code press OK and press OK Press 15 1 Add a work code ID A digital code of the work code Name The meaning of the work code 1 Enter the ID New Work Code Tip The terminal supports the 1 to 99999999 digit IDs by default If a prompt message The ID Name already exists is displayed enter Confirm OK Cancel ESC ano
41. he employee with this user ID Time Range Select a time period to query including the customized time period yesterday this week last week this month last month and all time periods 2 Attendance Photo and Blacklist ATT Photo Attendance Photo and Blacklist ATT Photo the operations are similar to those performed to Attendance Record 42 13 Print You can connect the device to a printer so that attendance records can be printed 02 21 Thursday Check In My Press on the initial interface 13 1 Data Field Setup Printer Options Press to select Data Field Setup and press OK 13 2 Printer Options 4 B Data Field Setup A a Print PressP to select Printer Options and press OK Printer Options System Personalize Manager Press to select Print and press Press V to select Data Field Setup OK and press OK Data Fields Sort by le Punch Time User ID Punch State Name Device ID Punch Time Print Time Punch State Wark Code Device ID Press to select the item to be set and press OK to enable or disable the selected item Printer Options Paper Cut Press gt to select the item to be set and press OK to enable or disable the selected item Data Fields Sort by lef Notes To enable the paper cutting function connect the device to a printer equipped with the function Then paper cutting is implemented automatically during printing based on th
42. hecked 23 Serial Comm Baudrate 115200 USB rr USB Baudrate RS232 Whether use RS232 to communicate Select Yes if RS232 is to be used RS485 Whether use RS485 to communicate Select Yes if RS485 is to be used Baudrate Used for communication with PC There are five options 9600 19200 38400 57600 and 115200 If the communication speed is high RS232 is recommended If the communication speed is low RS 485 is recommended USB Whether use USB to communicate Select Yes if USB is to be used UCB Baudrate Used USB to communication with PC There are five options 9600 19200 38400 57600 and 115200 If the communication speed is high Device ID 1 254 If RS232 RS485 is used this ID needs to be input on the software communication interface 7 3 PC Connection To improve the security of attendance data connection password needs to be set here Connection password must be input when PC software is to connect device to read data Comm Key System password is O by default namely there is no password it can be set as other value After setting the password must be input if software is to communicate with device Or the connection will fail The password length is 1 6 digits Device ID 1 254 If RS232 RS485 is used this ID needs to be input on the software communication interface 6 COMM Settings PC Connection Comm Key Ethernet Serial Comm Device ID Cellular Data Network Wireless Netw
43. ime Date Time Attendance Attendance Fingerprint A Fin gerprint USB Upgrade Cancel Press V to select Reset and PressA Vto select OK or Cancel press OK and press OK 8 5 USB Upgrade You can upgrade the firmware program of the FFR terminal by using the upgrade file in the USB disk through this parameter pe Date Time If you need the firmware upgrade file please contact our Gi technical support personnel Generally the firmware upgrade i l l Attendance Fingerprint is not recommended Reset 32 9 Personalize 42 21 Thursd ay pa Main Menu soon Personalize SA FP pa Voice a A Users User Role El Bell Schedules Punch State Options Check In Shortcut Key Mappings My Press on the initial interface Select Personalize and press OK Select User Interface and press OK 9 1 User Interface According to their personal preferences users can set up the initial interface style Personalize User Interface User Interface Menu Screen Timeout s Language English Lock Power Key Yoice Idle Time To Slide Show s Bell Schedules Slide Show Interval s Punch State Options Menu Screen Timeout s 60 Idle Time To Sleep m Shortcut Key Mappings Idle Time To Slide Show s Main Screen Style Analog And Digital Clock Slide Show Interval s Press W to select User Interface Press A V and OK to select items and press OK When the setting is completed press OK to sav
44. ime Period 1 To check the effective time period of a holiday enter numbers and you can view the duration of a holiday Press OK a i Holidays Edit Delete Press OK to Add Holiday Holidays End Date 01 01 Time Period Press Wto select Start Date and End Date and press OK Time Period Please input 0 50 Enter the Time period using keypad Press OK to return Edit Delete Press OK to enter Edit Hoildays Holidays Delete Press Y to select Delete and press OK 15 Holidays Press OK atan Date MM 10 01 Press Y to select a time option and press A V to set time After setting a period of time press OK to save the setting and exit h Holidays Add Holiday All Holidays Press Wto select All Holidays and press OK start Date 01 01 End Date 01 03 Time Period 1 Edit Hoildays operations are similar to those performed to add Hoildays 5 4Access Groups Grouping is to manage employees in groups Employee in groups use group time zone by default Group members can also set user time zone Every group can hold there time zones The new enrolled user belongs to Group 1 by default He can also be allocated to other groups Operation 1 Add group time zone Access Control Access Control Options Time Schedule Holidays Access Groups Combined Verification Anti passback Setup Press Wto select Access Groups and press OK
45. l l 3 Options When the function of external ringing is used set the output terminal of external ringing 5 Bell Schedules 6 Options External Bell Relay New Bell Schedule External Bell Relay Disabled Disabled All Bell Schedules Options Press Y to select Options and Press OK Press Y to select press OK to save press OK and return 35 9 4 Punch State Options Personalize Punch State Options User Interface Voice Punch State Timeout s Bell Schedules Punch State Required Shortcut Key Mappings Press Y to select Punch State Press A V and OK to select items puc ANA press Ok When the setting is completed press OK to save the setting and exit Punch State Mode used to select a status key mode The following modes are available Off The status key function is not used The status keys defined as shortcut keys become unavailable Manual Mode The status keys are switched manually and the current status key will disappear when the preset time elapses Auto Mode If a shortcut status key is configured to be switched after a period of time the status key is switched automatically when the period of time elapses Manual and Auto Mode The main interface displays the status keys that can be switched automatically and you are also allowed to switch status keys manually A status key you select manually will be switched according to the automatic switching plan after it disappears upon a timeout Manual Fixed M
46. lay period For private short messages you need to set a display period after setting an effective period That is the display period of a private short message can be viewed when you punch in or out during the effective period of the message 4 Set Message type 44 Public SMS able to be seen by all employees Personal SMS aimed at individual only Draft Preset SMS no difference of individual SMS or common SMS 5 Public 4 Message Hello New Message Message Type MA Personal start Date 2013 02 22 Start Time 12 27 Draft Expired Time m 60 Message Type Draft Select Message Type and press Press A V to select the message OK type then press OK 14 2 Public Personal and Drafts lists s Qu Hello 2013 02 22 View a Public Messages Edit q Personal Messages Delete Drafts B Message Options Press W to select the message list then press OK You can view edit or delete the one you selected When edit message the operations are similar to those performed to add a SMS 14 3 Message Options Set the personal Message Show Delay time on the initial interface Message Options Message Show Delays Message Show Delay s 60 Public Messages Personal Messages Drafts Er Message Options User Defined Press to select Message Press OK Press W to select the time and press Options and press OK OK 14 4 Employee check SMS After configuration of a public short messa
47. llPaper Delete all WallPaper Delete Screen Savers Purge the promotional pictures uploaded from USB disks to the FFR terminal For details on how to upload promotional pictures see 5 4 Upload Picture 10 2Backup Data Back up the service data or configuration data of the device to the device or a USB drive Data Manager Backup Data Backup to Device Delete Data Backup to USB Disk Backup Notes Restore Data Backup start Press Y to select Backup Press Y to select Backup to Press Y and OK to select the local Dataand press OK Device and press OK configuration items to be backuped to decice the selected items 7 Backup Content Business Data System Da Backup to Device Backup Notes Backup is completed ESC to exit Press Y to select Backup start and press OK Note Backup to USB Disk the operations are similar to those performed to Backup to Device 10 3 Restore Data Restore the data stored on the device or in the USB drive to the device Data Manager Restore Data Restore from Device Delete Data Backup Data Restore from USB desk Notes start Restore Press Y to select Restore Data Press Y to select Backup from Press Y and OK to select the local and press OK Device and press OK configuration items to be restored and save the selected items 38 7 Content Business Data System Da Restore from Device Restore from Device 8 Content Business Data System Da Notes Notes Pres
48. mes correctly For details see 1 1 Finger Placement 2 Verification rN UserID Verify Badge y p rif i n g ssa Swipe your ID card properly in the swiping area Operation succeeded a Enroll as Fingerprint Card Please input user ID ontinue Ob Enter the user ID using keypad then press OK Enroll as Fingerprint Card User ID 6 Please swipe badge Enrollment succeeds Swipe your ID card properly in the swiping area rot UserID 3 Verify Fingerprint Please press your finger Please press your finger Place your finger on the fingerprint sensor properly Enroll as Fingerprint Card TEFEN T V Please select the finger to be enrolled Press Y to select a finger and press OK Enroll as Fingerprint Card Operation succeeded Operation succeeded UserID 1 Name Verify Badge Successfully verified Successfully verified As shown in the figure Notes If the pressed fingerprint is different from that stored in the card the verification will fail 6 3 Clear card information Delete all the information in the card being operated at present Operation 20 IC Card Clean Card Data Clean Card Data rs Enroll as ID Card Please swipe badge Deleting a Enroll as Fingerprint Card ri Clean Card Data Copy Card Data Ta IC Card Options Ua be Press Y to select Clean Card Swipe your ID card properly in the Deleting Data
49. metric technologies and services we pay much attention to the compliance with the laws related to human rights and privacy in every country while constantly performing research and development We hereby make the following statements 1 All of our fingerprint recognition devices for civil use only collect the characteristic points of fingerprints instead of the fingerprint images and therefore no privacy issues are involved 2 The characteristic points of fingerprints collected by our products cannot be used to restore the original fingerprint images and therefore no privacy issues are involved 3 We as the equipment provider shall not be held legally accountable directly or indirectly for any consequences arising due to the use of our products 4 For any dispute involving the human rights or privacy when using our products please contact your employer directly Our other police fingerprint equipment or development tools will provide the function of collecting the original fingerprint image of citizens As for whether such a type of fingerprint collection constitutes an infringement of your privacy please contact the government or the final equipment provider We as the original equipment manufacturer shall not be held legally accountable for any infringement arising thereof Note The law of the People s Republic of China has the following regulations regarding the personal freedom 1 Unlawful arrest detention or search of
50. n between the terminal and PC including the IP address Gateway Subnet Mask Baud Rate Device ID and Comm Key and so on System Through this submenu you can set system related parameters including the Date Time Attendance Fingerprint Camera Reset and USB Upgrade to enable the terminal to meet user requirements to the greatest extent in terms of functions and display Personalize used to meet user requirements to the greatest extent regarding display audio ringing and keyboard definition Data Manager Through this submenu you can perform management of data stored on the terminal for example Delete Data Backup Data and Restore Data USB Manager Through this submenu you can import user information and attendance data stored in a USB disk to related software or other fingerprint recognition equipment Attendance Search For query the record saved in the device query record function is provided Print used to determine whether to print attendance records immediately Short Message used to set a public or private short message The short message will be displayed to a specified person in the specified time after work attendance check which facilitates information transfer Work Code used to identify different work types which facilitates work attendance check Diagnostics This submenu enables the system to automatically test whether functions of various modules are normal including the Screen Fingerprint Voice Keyboard and
51. name is only in the case of open print function can be set 33 9 2 Voice Personalize User Interface Keyboard Prompt B e 5 C h e d U es y 0 ume Punch State Options Shortcut Key Mappings Press V to select Voice and Press A V and OK to select items press OK When the setting is completed press OK to save the setting and exit Voice Prompt This parameter is used to set whether to play voice prompts during the operation of the FFR terminal Select ON to enable the voice prompt and select OFF to mute Keyboard Prompt This parameter is used to set whether to generate beep sound in response to every keyboard touch Select ON to enable the beep sound and select OFF to mute Volume This parameter is used to adjust the volume of voice prompts 9 3 Bell Schedules Many companies need bell for on duty and off duty Some use manual bell Some use electronic bell To save cost and provide convenience for management we integrate bell functions to fingerprint sensor You can set time for bell When it is the scheduled time The device will automatically play the selected ringtone and trigger the relay signal The ringtone playing does not stop until the ringing duration has elapsed By default the device provides 15 ringtones 1 Adding a Bell Personalize Bell Schedules New Bell Schedule User Interface Voice All Bell Schedules Bell Time Options Repeat Never Punch State Options Bell Type Internal Bell
52. ned Verification Combined Verification 00 00 00 00 00 2 00 00 00 00 00 00 00 00 00 00 3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2 3 5 y 00 00 00 00 00 Press Y to select the line to be Enter the No using keypad and When setting successful an edited press OK press OK interface shown above Notes To delete an unlocking combination set the group ID to all Os 5 6 anti pass back Sometimes some illegal person follows the employee into the gate which will bring security problem To prevent such risk this function is enabled In record must match out record or the gate won t be open This function needs two machines to work together Refer to appendix 4 anti pass back for anti pass back setting 5 7 Duress alarm parameter There is duress alarm parameter setting in the device When employee come across duress select duress alarm mode the device will open the door as usual But the alarm signal will be sent to backstage alarm Duress Function If select Yes press help then press fingerprint in the following 3 seconds or press ID number and duress alarm will come out after successful identification If select No it is useless to press help help can be set in keyboard definition Alarm on 1 1 Match if select Yes when user use 1 1 match mode alarm signal will come out Or there is no alarm signal Alarm on 1 N Match if select Yes when user use 1 N match mode alarm signal will come out
53. ngs e 02 21 Thursday p en pp a Users User Role Access IC Card a Co Serial Comm pa an a Cellular Data Network Check In Wireless Network a 8 M S on the initial interface Pressto COMM Settings and Select Ethernet and press OK press OK Press 7 1 Ethernet When Ethernet is used for communication of device and PC the following settings need to be checked Ethernet Ethernet Subnet Mask 255 255 255 0 Subnet Mask 255 255 255 0 Gateway 192 168 1 254 Gateway 192 168 1 254 DNS 0 0 0 0 DNS 0 0 0 0 TCP COMM Port 4370 TCP COMM Pon 4370 DHCP DHCP IP Address IP is 192 168 1 201 by default You can modify it if it is necessary But it cannot be the same with that of PC Subnet Mask It is 255 255 255 0 by default You can modify it if it is necessary Gateway It is 0 0 0 0 by default If the device and PC are in different net segment it is necessary to set address DNS The DNS Server is 0 0 0 0 by default and can be changed as required TCP COMM Port It is 4730 by default You can modify it if it is necessary DHCP short for Dynamic Host Configuration Protocol which is used by a server to allocate dynamic IP addresses to clients on a network Display in Status Bar used to set whether to display network icons in the status bar of the main interface 7 2 Serial Comm When serial port RS232 RS485 is used for communication of device and PC the following settings need to be c
54. nono nonononeninanenrnnnrnrnnnrnnnanness 10 22 Edita de let a GOT pili loli a eibar a 10 3 3 Display OIM aria A A a a a a EE a E aa 11 O agers a E a E a E E 12 SAACCE SO SELINA ie 13 TI ESS SONO ODIOS scroll tic tit isa 13 DAM INE ENCANTA LA AA A Sane 14 EN e cos ls A ete seater ea satan desea ena ac eesti beatae ntti den ates OM stant ence bates 14 To check the effective time period of a holiday enter numbers AaNd ccoocncoccncccnncccnccncncnncnconnncnnnnnnnnnnnanonnnnonnnnnnncoss 15 MAA A A ae 16 5 5 Set Combined VentICalON iii A AAA A A OA 17 OID o A A A eae 18 9 7 Duress alarmi parameter mitad io 18 GIG Card management sksd arcsec otero sae dace sited nati acesdanetice iS we tnutanldesb raed dic nettnet aceon sdtania sete vancecees Uae 19 6 EGON aS ID pais sansa aston acensavana a aus ean daa vend A wasn a aetna veg ended 19 0 2 Emmoll asi GSMO r CG Ai Cha asics E atic cae tse nace acacia na 20 6 9 Clear card normal arranca 20 0 4 CODY caldo ina Oti cto Suda 21 00 Set Card parameter VAS A A A A Weta dhe Recs E 22 F COMMUNICATOR ct aa ica aida i n 23 A A A corvad badd hathsied come a ent venus tnemay ail saved tated slenataeane taal toant ene 23 PAS AA A sient luate 23 TS PE COME Mr ii A E A EA AA A E cio 24 r Celular Data Neo tt lot 24 LS Wireless ING TW OMI vector datada 29 OADM Wi cease ea ake eee ee eet eed a fan erence oer a aaa ee ale eee 26 Decl VN NEC ACO UO SAA A A cul exiundneah ES 27 AA AAA o A Geadoven
55. ode After a status key is switched it is always displayed until you switch it later again Fixed Mode A status key is always displayed and cannot be switched Punch State Timeout s specifies the timeout period of the status key displayed on the main interface Punch State Required specifies whether the status of work attendance check must be selected during authentication 9 5 Shortcut Key Mappings You can define six shortcut keys as attendance status shortcut keys or functional shortcut keys On the main interface of the FFR terminal press corresponding keys and the attendance status will be displayed or the function interface will be rapidly displayed Personalize Shortcut Key Mappings User Interface Check Out Voice Function Punch State Options Bell Schedules Break Out Name Check In Punch State Options Break In Set Switch Time Overtime In Overtime Out Press Y to select Shortcut Key PressVto select a key and Press Press A V and OK to select items Mappings and press OK OK When the setting is completed press OK to save the setting and exit Notes When setting the attendance status shortcut keys you can also set the Auto Switch parameter When Auto Switch is enabled the FFR terminal automatically switches the attendance status at the specified time If a status key is selected the device will not use any status key when the status key function is disabled 36 10 Data Manager 02 21 Thursday
56. odification 5 1 Access Control Options Set parameters to control locks and related device Door Lock Delay s Device control electronic lock is in enabling time effective value 1 10 seconds Door Sensor Delay s After the door is open delay the time to check door sensor If door sensor state is different from the normal state of door sensor mode alarm will be given off This time is called door sensor delay effective value 1 99 seconds Door Sensor Type It includes NONE NC and NO NONE means there is no door sensor NO means the door is open normally NC means the door is closed normally Door Alarm Delay s When abnormal door sensor state is detected alarm will be given off after some time This time is door sensor alarm effective value 1 99 seconds Retry Time To Alarm When the failed press times reach the set times alarm signal will come out effective value 1 9 times NC Time Period Set time zone for access control NC Nobody can unlock during this time zone NO Time Period Set time zone for access control NO The lock is always in enabling state during this time zone Operation access Control Access Control Options Access Control Options Door Sensor Delay s Time Schedule Door Sensor Delay s 10 Door Sensor Type Holidays Door Sensor Type None Door Alarm Delay s Access Groups Door Alarm Delay s 30 Retry Times To Alarm Combined Verification Retry Times To Alarm NC Time Period Anti passback
57. ork ADMS Confirm OK Press Y to select PC Connection Press OK Enter a password press Y to select and press OK Confirm OK and press OK 7 4 Cellular Data Network When the equipment is in the Dial Up Network make sure the device is in the coverage of GPRS or CDMA signal and it is must known of the used modem type APN name and access number and so on 24 COMM Settings Cellular Data Network Ethernet Serial Comm APN Setup PC Connection Heartbeat Server Details Wireless Network D M S Cellular Data Network whether to enable access to a mobile network APN Setup used to set APN information such as the access number user name and password Heartbeat Server collects attendance records from the device by using the data collection software provided by ZKSoftware After you set the server IP address for the device correctly the device will send attendance records to the heartbeat server automatically Details includes information about the connected mobile network such as the network mode telecom operator IP address and received and sent data APN Setup APN Setup Dial Number User Name APN Access Point Name used to identify GPRS CDMA types of business Dial Number The access number of GPRS CDMA business User Name and Password used to check whether a user has the rights to access a network 7 5 Wireless Network x Wireless Fidelity WIFI is also known as the 802 11b standard The gr
58. oup time zone 5 Access Groups 6 All Groups Access Groups 1 01 00 00 Edit New Group All Groups 2 01 00 00 Delete 01 02 00 01 03 00 01 03 04 Press Vto select All Groups Press Y to select one of All Groups Press Vto select Edit and press OK and press OK and press OK No 1 Delete Are you sure to delete Verification Mode Fingerprint Password Bad Time Period 1 Time Period 2 Time Period 3 Include Holidays The No cannot be modified and Press Y to select Delete and press PressA Vto select OK to delete the the other operations are similarto OK Access Groups those performed to add a New Groups Press ESC to reture 5 5 Set Combined Verification Make various groups into different access controls to achieve multi verification and improve security An access control can be made up of 5 groups at most Operation 1 Add Combined Verification For example to add an unlocking combination which needs the verification of both group 1 and 2 as shown below Access Control Combined Verification Combined Verification 00 00 00 00 00 Time Schedule 2 00 00 00 00 00 Holidays 3 00 00 00 00 00 00 00 00 00 00 Combined Verification 5 00 00 00 00 00 Anti passback Setup Press Y to select Combined Press OK to add a new Combined Enter the No using keypad and Verification and press OK Verification press OK 17 2 Edit and Delete Combined Verification Combined Verification Combi
59. rification failed an interface interface shown above shown above 1 2 2 1 1 fingerprint verification In the 1 1 fingerprint verification mode the terminal compares current fingerprint collected through the fingerprint collector with that in relation to the user ID entered through keyboard Adopt this mode only when it is difficult to recognize the fingerprint 2013 02 22 Friday 2013 02 22 Friday za 2013 02 22 Friday User ID User ID 1 Name Joe Verify Fingerprint Verify User ID Fingerpr Error Invalid fingerprint nt i Failed to verify Duplicated punch Enter the user ID using keypad When verification successful an When verification failed an interface on the initial interface Then press interface shown above shown above OK Place the enrolled finger properly on the fingerprint sensor Notes 1 If it says that the enroll number is wrong it means that there is no such number or the employee doesn t enroll password 2 lf the device says Please press again place the finger on the fingerprint sensor again You can try another 2 times by default The repeated times can be set in 8 3 Fingerprint option If it fails after 2 times return Step 1 for second operation 1 2 3 Password Verification In the password verification mode the terminal compares the password entered with that in relation to the user ID 02 22 Friday A 02 22 Friday User ID UserID 1 UserID 1 Verify Passwor
60. rprint verification and the enrolled template 1 N matching threshold value The similarity of verification and the enrolled template Recommended matching threshold value Matching threshold value FRR FAR 1 N 1 1 31 high low 45 25 middle middle 35 15 low high 25 10 FP Sensor Sensitivity used to set the sensitivity of fingerprint collection The default value Medium is recommended You can set the sensitivity of fingerprint collection to High when the response to finger scan lags in a dry environment When the usage environment is humid you can set the sensitivity of fingerprint collection to Low if the fingerprint is difficult to identify 1 1 Retry Times This parameter is used to set the retry times in the event of failure of 1 1 verification or password verification due to absence of fingerprint enrollment or improper finger placement so as to avoid repetitive operations Fingerprint Algorithm This parameter is used to select the fingerprint algorithm version between 9 0 and 10 0 Please select the algorithm version with caution because the fingerprint templates of these two algorithm versions are incompatible Fingerprint Image This parameter is used to set whether to display the fingerprint image on the screen during fingerprint enrollment or comparison It has two values Permanent Display and No Display 8 4 Reset Make device s communication option system option and so on reset to the state of factory System i System Date T
61. s Vto select Start Restore Press Y to select Yes or No and press OK Device and press OK Note Backup from USB Disk the operations are similar to those performed to Backup from Device 39 11 USB Manager Import user information fingerprint template attendance data and so on in the device to attendance software or import user information and fingerprint to other devices through U disk Before you upload download data from to a USB drive insert the USB drive into the USB interface of the device m pin TA COMM System Personalize Settings 02 21 Thursday a i USB Attendance Manager Search Insert U disk into USB slot of Press Fon the initial interface Press Vto Select USB Manager fingerprint sensor through mini USB and press OK 11 1 Download USB Manager SCS Download gt Upload User Data Download Options User Portrait Attendance Photo Blacklist Photo Work Code Select Download and press OK Press Y and OK to select the item to be downloaded Download Attendance Data Import all the attendance data from the FFR terminal to a USB disk Download User Data Import all the user information fingerprints and facial images from the FFR terminal to a USB disk Download User Portrait Import the employees photos from the terminal to a USB disk Download Attendance Photo Download attendance photos saved in device to U disk The format of photo is JPG Download Blacklist Photo Download black
62. ser Tip The terminal Please input Name supports the 1 to 9 digit user IDs by default User Role Normal User If a prompt message The Fingerprint 0 user ID already exists is Badge Number Password Confirm OK Cancel ESC d IS played e nter a noth er D Select User ID and press OK Enter the user ID using keypad then press OK 3 1 2 Entering a Name Enter a user name through the keyboard 4 5 User ID New User For details of operations Please input key to switch input method key to enter on keyboard interface see User Role Normal User Appendix1 Text Input Instructions Fingerprint The terminal supports the Badge Number 1 to 23 character names by Password Confirm OK Cancel ESC Press Y to select Name and press Press to switch input method and OK enter the Name then press OK 3 1 3 modifing the user role New User User Role Super Admin Fingerprint Badge Number Password Press Vto select User Role and Press to select the role and press press OK OK Super Admin The super administrator has the operation rights to all menu functions Normal user If the system has an administrator a common user is entitled only to authentication using his her fingerprint password or card If the system does not have an administrator a common user has the operation rights to all menu functions User Defined Role A user defined role can b
63. side the door slave machine hereinafter Wigand signal communication is adopted between the two machines 93 master machine slave n machine rs user OUT g working principle The master machine has Wigand In and slave machine has Wigand Out Connect Wigand Out of slave machine to Wigand In of master machine Wigand output from slave machine must not own machine ID The number sent to master machine from slave machine must be found in the master machine function Judge whether it is anti pass back according to user s recent in out record In record and out record must be matched This machine supports out in or out in anti pass back enter machine menu setting system setting advanced setting anti pass back When master machine is set as out anti pass back if user wants to come in and go out normally his recent record must be in or he cannot go out Any out record will be anti pass back refused For example a user s recent record is in his second record can be out or in His third record is based on his second record Out record and in record must match Notice if customer has no record before then he can come in but cannot go out When the master machine is set as in anti pass back if the user wants to come in and go out normally his recent record must be out or he cannot go out Any out record will be anti pass back refused by the system Notice if the customer has no former record then he
64. ta Manager gt lt Backup Data Download y Restore Data USB Manage gt lt Upload Attendance Record Dowmoae Options Attendance Attendance Search Photo M I Blacklist ATT Data Field Gre Phot pa Setup Public Print Messages Printer Options Personal Short Mea gt lt Messages New Work Code Drafts Work Code BTW OM Testa Message Codes g l Options Work Code Test LCD Options Diagnostics gt lt Test Voice Device Capacity Test Keyboard MU System Info PX Device Info Test Fingerprint Sensor y Firmware Info dl Test Clock RTC 3 User Management Through this submenu you can browse the user information stored on the terminal including the user ID name user role fingerprint badge number card password user photo add modify or delete the user information In company s attendance management for employee s change the information on fingerprint sensor also needs modification Therefore operations including add delete check modify and so on can be done on fingerprint sensor 3 1 Adding a User 02 21 Thursday Wain Menu All Users ES me o User Role Display Style Control system Personalize Mn the initial interface Select Users and press OK Select New User and press OK Press 3 1 1 Entering a User ID The terminal automatically allocates an ID starting from 1 for every user in sequence If you use the ID allocated by the terminal you may skip this section 5 New U
65. ther ID Select ID and Press OK Enter the user ID using keypad then press OK 2 Enter the name New Work Code For details of enter name Please input see Appendix1 Text Input key to switch input method key to enter Instructions The terminal supports the 1 to 23 character names by default Select Name and press OK Enter the name then press OK 15 2 All Work Codes You can view edit or delete the work code from the work codes list The ID cannot be modified and the other operations are similar to those performed to add a work code When edit 47 Work Code All Word Codes New Work Code Delete fest Work Code Options Press to select All Work Codes View all work codes Press Y to select the one you want and press OK to edit or delete 15 3 Set work code Set verify whether enter the Work Code number must be entered must exist Work Code Work Code Options New Work Code Wor All Word Codes Work Code Must Defined rr Press to select Work Code Press OK to open or close Options and press OK 48 16 Auto Test The auto test enables the system to automatically test whether functions of various modules are normal including the LCD voice sensor keyboard and clock tests 02 21 Thursday 2 ma Nain Nenu OS Diagnostics Test LCD SB sTendance ails Sho a F N OS 5 hd sra ph Test Voice a Test Keyboard Check In Test Fingerprint Sensor Work Code Diagnostics System Info 7 i T
66. w oo os a 3 Users User Role E Check In System Mit Press on the initial interface 10 1 Delete Data Main Menu Contro Data Manager Backup Data Restore Data _ in Personalize Select Data Manager and press OK Select Delete Data and press OK Through the Data Mgt menu you can perform management of data stored on the FFR terminal for example deleting the attendance record all data and promotional pictures purging management rights and resetting the FFR terminal to factory defaults Data Manager Backup Data Delete Attendance Photo Restore Data Delete Blacklist Photo Delete All Data Delete Access Control Delete Admin Role Select Delete Data and press OK DOCE item to be deleted Delete Attendance Date Delete all the attendance records Delete Attendance Photo Delete all employees attendance photos Delete Blacklist Photo Delete the saved photos which fail in passing attendance record Delete All Data Delete all the information of enrolled personnel including their fingerprints facial images and attendance records Delete Access Control Delete all Access Control records 37 Delete Data Delete All Data Delete Access Control Delete Admin Role Delete User Photo Delete Wallpaper Press W and OK to select the Clear Admin Role Change all administrators to ordinary users Delete User Photo Delete all User Photo Delete Wa
67. wn shown above 2 1D Facial Verification 32 26 Tuesday 02 26 Tuesday io 32 26 Tuesday User ID UserID 3 UserID 3 Verify Badge Verify Fingerprint Name ta Verifying Please press your finger Verify Badge Y Duplicated punch Swipe your ID card properly at Place the enrolled finger properly If the verification is successful an the swiping area to enter the 1 1 on the fingerprint sensor interface as shown above facial verification mode 2 Main Menu When the device is on initial interface press MH to open main menu as shown below Main Menu 2 me Man Me nu pa Access Control p System Personalize ata Work Code Diagnostics System Info settings i Users Through this submenu you can browse the user information stored on the terminal including the user ID name user role fingerprint badge number card password user photo add modify or delete the user information User Role used to set the rights of a user defined role that is rights to menus Access Control Through this submenu you can set the parameters of the electronic locks and related access control devices ICCard Support Mifare non touch intelligent card with working frequency of 13 56MHZ Integrate fingerprint attendance to other systems and support multi verification mode to meet the demands of different people COMM Settings Through this submenu you can set related parameters for communicatio
68. ypad Re enter the password according to press OK then press OK the system prompt and then press The FFR terminal supports the 1 OK to 8 digit passwords by default 3 1 7 Enroll Photo x If you have enrolled your photo in the system the system will display your enrolled photo in addition to your ID and name after you pass the verification 4 A New User eer Photo Name Joe User Role Normal User Fingerprint 1 Badge Number 4010195754 User Photo Press Y to select User Photo and stand naturally in front of the press ESC to directly return to press OK screen Press OK previous interface 3 1 8 Access Control Role User access control option is to set open door access aimed at everybody including subgroup setting verification mode using time zone duress fingerprint management Access group Allocate enrolled user to different groups for management convenience Verification mode 1 Group verification type Whether the user use his group s verification type 2 Individual verification type Select the user s verification type If group verification type is not verification type won t be affected Duress Fingerprint User enrolls a new fingerprint or specifies an enrolled fingerprint in the fingerprint sensor as duress fingerprint At any time anywhere duress alarm will generate after the fingerprint passes verification Apply Group Time Period 1 Select ON group time zone the user use his group s de
69. zer Adapter O Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ T11363 2006 x Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials for this part is above the limit requirement in SJ T11363 2006 Note 80 of the parts in this product are manufactured with non hazardous environment friendly materials The hazardous substances or elements contained cannot be replaced with environment friendly materials at present due to technical or economical constraints 57

Download Pdf Manuals

Related Search

Related Contents

amenagement et developpement durable des territoires  MODE D`EMPLOI POUR VÉLO ELLIPTIQUE  manuale di istruzioni , per uso e manutenzione - mbm  ML-020  Manual do utilizador  3. Plant description and technical data  STIHL RE 98  2012KCI User manual  User's Manual Benutzerhandbuch Manuel de l'utilisateur  ホイールマウス  

Copyright © All rights reserved. Failed to retrieve file