B- VC model of PowerBay
Contents
1. USER MANUAL Northmeter tester PowerBay SSM B VC model of PowerBay Overview The B VC model of PowerBay is been used in the measurement of the consumption of AC active energy which with the frequency of 50HZ It adopts the advanced microelectronics technology in data collecting processing and protecting It can be used in several conditions as in home in rental estates in office in laboratory and so on This product used simply and conveniently and shown clearly It can be used in the monitor of power using equipments such as the air conditioning the refrigerator the energy save lamp and so on Technical parameters Standard BC17215 2003 Voltage specification 220V 50Hz Maximum current 10 A F Accuracy grade 1 0 Meter constant 6400imp KWh Power consumption lt 1W Weight about 130g Size 121mmx63mmx20mm Working temperature 25 45X F F F Functions Measurement of the active electric energy using The current voltage monitored timely The current monitored timely F The current active power monitored timely The power factor monitored timely The frequency of voltage monitored timely Power using time in total can be record Measurement of the quantity of CO2 which generated when power using Notes 0 555kg CO2 generated when 1 KWh electric energy consumed The overload threshold can be set warning will happen when overload happened Displayed by LCD which with lar2. ge size F F F F Instructions 1 Plug in the powerbay set and then plug in the power using equipments 2 The total used energy active power current voltage current power using time in total frequency and CO2 generated can displayed on LCD 3 LCD shown the active power value continuously when power on the backlight lighted at the same time and will be off after 5 seconds 4 Display when press the buttons The active power value power factor current voltage frequency power using time in total total used energy and CO2 generated will displayed on LCD in cycle or reverse cycle when press the Y or A button 5 Warning when overload happened When the current power exceed the limited power quota continuously warning will happen backlight will blink and stopped after didn t overload for a few times How to set the overload threshold Press the Y or A button until the current power value shown on LCD press the set still for 2 seconds now LCD show as XXXX W and the rightest X blinking Press the V or A button until the blinking X shown as what number you want and then press the OK this bit set accomplished Now the next X blinking set the following bits with the same steps LCD shown the current power value after threshold set accomplished The threshold value wouldn t more that 2200W or else LCD will shown Erri for 3 seconds and the threshold should be set again 6 Clear the power using time in
3. total Press the Y or A button until the power using time in total shown on LCD press the set still for 2 seconds now the numbers on LCD blinking press OK time clear accomplished and LCD shown the power using time in total Clear the power used in total Press the W or A button until the power used in total shown on LCD press the set still for 2 seconds now the numbers on LCD blinking press OK clearance accomplished and the value of CO2 generated cleared too LCD shown the power used in total
Download Pdf Manuals
Related Search