QUADFLOWER LED Light Effect
Contents
1. MSS oap brane qtx Operation The QUADFLOWER can operate in stand alone master slave or DMX modes Stand alone master slave For stand alone mode first choose whether sound to light is required by selecting on or oF F from SoUn Then select one of the 12 pre programmed chase modes from Shnd option Sh_ Oto 5h Ie select 5h 0 for random chase option Further QUADFLOWER units can be control by a master unit synchronization Ensure the master unit Slave mode Sind is set as ASE and the controlled unit slave mode is set as 5L or SL_e Connect DMX out from the master unit to the DMX in of the slave unit DMX mode Simply connect the DMX signal source to DMX in of QUADFLOWER via a balanced XLR lead Extra fixtures can be controlled by the same DMX signal from the loop through DMX signal on the DMX out Ensure the correct DMX start address is set from the Addr option on the manual control Maintenance There are no end user serviceable parts within the unit To maintain a workable condition we advice dusting the unit on a regular basis Before cleaning or dusting always ensure the mains power cable is removed from the unit Use a soft cloth lightly dampened with water or mild detergent to wipe off the dust from the casing DO NOT use spray on the case as droplets may enter the unit through the ventilation and cause damage to electronics inside Remove the trapped dust from the ventilation holes of the unit with a vacuum cleaner with a br2. condition with no short connections or damaged plugs qty avsl con nE oy Hard E qtx Setup Installation should be done carried out by qualified personnel only and must comply with HSG95 guidelines QUADFLOWER is suitable for both overhead and freestanding installation For overhead installation it is advised to install the unit 3 metres above the stage ground DO NOT install at audience head level Always use safety wire to secure unit to fixture using the safety hook For freestanding the brackets can be used as a stand or rest Avoid projecting beams directly into the audience Brackets 1 2 3 4 5 6 7 IEC socket power in 4 DMX signal in DMX male socket IEC plug power out to other fixture 5 LCD display and control button Earth connection screw 6 DMX signal out DMX female plug DO NOT REMOVE 7 Built in mic i Manual control menu Press the menu button to enter setting menu Press up and down to navigate through various setting options Press enter to enter desired setting Choose set value by up and down buttons and confirm setting by press enter Display Mode Press ENTER for setting ae o 100 0 100 gain Blackout mode no on YES blackout LED display inverted d 5P dS P normal or inverted display Fixture test EESE Fixture steps through all functions press MENU to exit Displays how many hours of use for the fixture qty avsl con an
3. E qtx QUADFLOWER Item ref 151 591UK LED Light Effect User Manual Please read through this manual thoroughly before use any damage cause by misuse of product will not be covered by warranty Thank you for choosing the QTX QUADFLOWER This interesting light effect combines 256 ultra bright LEDs with four output lenses to create a unique wide coverage light display Operating the unit is easy with auto sound to light master slave or DMX modes to choose from The pre programmed settings offer pixel animation effects to give a stunning show Great projected onto walls ceilings or even dance floors use of a smoke machine will only enhance what this effect has to offer In the box Your QUADFLOWER should arrive to you in good condition supplied with mains leads and mounting brackets If there is any damage or items missing contact your dealer immediately Warning To prevent risk of fire or electric shock do not expose the unit to rain or damp environments In the event of a spillage disconnect the mains and allow the unit to dry out naturally Qualified personnel should then check the unit before continuing use Please do not open cover contain high voltage This product is not serviceable or repairable by end user Please refer to qualified personnel for service and repair e Always check the correct voltage and the condition of the IEC lead before connecting to a power outlet e Always ensure any DMX leads used are in good
4. ush attachment a dust blower or a hand brush DMX channel value reference DMX Value Function __ _ _ Channel 1 Channel 2 000 255 CS speed 000 0 to 255 Channel3 3 000 255 255 100 Channel 000 009 Strobe ON 010 255 Strobe speed 0 100 151 591UK User Manual E qtx Specifications LED type 5mm pSmmB DMX channes ooo HS O Troubleshooting lerno maio No strobe output Check strobe settings on control panel or from DMX controller Check DMX connection and leads Check that DMX mode is enabled set Addr on control panel Overheating Ensure that the unit is not too close to a heat source cutting out Ensure that adequate airflow is afforded for cooling Unresponsive to DMX CE This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life The goods must be disposed of according to your local council guidelines Errors and omissions excepted Copyright 2014 AVSL Group Ltd 151 591UK User Manual
Download Pdf Manuals
Related Search