User`s manual - Astal Security Technologies
Contents
1. AT IS NOT PROVISIONED FOR THE GIVEN PRODUCT IN ITS USER S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE PRODUCT OR THAT ARISES FROM THE NORMAL APPLICATION OF THE PRODUCT ITS MANUFACTURER MUST BE CONTACTED OR THE RESPONSIBILITY OF THE MANUFACTURER FOR THE RESULTS OF SUCH AN ACTION SHALL BE EXCLUDED IMPORTANT SAFEGUARDS AND WARNINGS l Read keep and follow these instructions All the safety and operating instructions should be read before the product is operated 2 Heed all warnings All warnings on the product and in the instruction manual should be adhered to 3 Follow all the safety instructions in this manual Improper installation and camera operation may have impact on operator s safety as well as camera operational reliability and working life All the camera installations and operations should be done according to this user s manual Unplug the unit before maintenance activities Use only attachments accessories specified by the manufacturer POR R To reduce the risk of fire or electric shock do not expose this unit to rain or moisture as this unit is designed for indoor use only Do not install the camera near any heat source or near water any wet area 8 Do not block any ventilation openings All the installations have to be in accordance with the manufacturer s instructions 9 Installation and servicing should be done only by qualified service personnel and conform to all local codes 10 This product shoul2. User s manual NVH 250H 230 I NVH 250H 12 24 1 NOVUS NVH 250H 230 I1 NVH 250H 12 24 II users manual v 2 3 INFORMATION C EMC 2004 108 EC and LVD 2006 95 EC Directives CE Marking Our products are manufactured to comply with requirements of following directives and national regulations implementing the directives Electromagnetic compatibility EMC 2004 108 EC Low voltage LVD 2006 95 EC with further amendment The Directive applies to electrical equipment designed for use with a voltage rating of between 50VAC and 1000VAC as well as 75VDC and 1500VDC WEEE Directive 2002 96 EC Information for users who want to get rid of electrical and electronic appliances This appliance is marked according to the European Directive on Waste Electrical and Electronic Equipment 2002 96 EC and further amendments By ensuring this product 1s disposed of correctly you will help to prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The symbol on the product or on the documents accompanying the product indicates that this appliance may not be treated as household waste It shall be handed over to the applicable collection point for used electrical and electronic equipment for recycling purpose For more information about recycling of this product please contact your local authorities your household waste disposal servic
3. ack top part See picture below for parts lacation Mounting base Additional Connectors board screws connectors Thermostat board Seal f gn z x m a A NU pa Heater with metal Top Bottom Monite base Cable Channel Fuse GND wire shield connecting screws with clamp All rights reserved AAT Holding sp z o o 7 NVH 250H 230 I1 NVH 250H 12 24 II users manual v 2 3 SPECIFICATIONS 3 3 Electrical elements Housing is equipped with a heater controlled by a thermostat The heater task is to avoid steam condensation on glass window That s why heater is located next to the glass window Depending on housing model the heater operates with 230 VAC or 12VDC and 24 VAC The heater is turned on by thermostat when the temperature drops to 18 C and turns it off when temperature reaches 25 C Thermostat is located on thermostat bard All electrical elements are connected by default One should connect power supply to additional connectors located in the rear part of the housing starting from glass window Refer to picture below Thermostat board Bottom part GND of Bottom GND of Top part gt part MARK ELEMENT Heater 230VAC or 24VAC 12VDC depending on model STAT 1 Thermostat Additional connectors on thermostat board V IN Terminal connectors on terminal board for hater connection neutral or 12VDC GND live line or 12VDC ge Additional termin
4. al connectors for camera power supply etc CAUTION Heater is a non linear element Power consumption of heater in steady state is about 16W Power consumption in starting stage especially in low temperatures may increase several times All rights reserved AAT Holding sp z o o 8 NVH 250H 230 I1 NVH 250H 12 24 II users manual v 2 3 MOUNTING 4 Mounting camera in housing Cross section Isolation separator l Select suitable mounting location and lead all cables near the bracket 2 Mark mounting position and drill 3 holes for plastic anchors 3 Screw on bracket to the wall using 4 tapping screws witch plastic anchors 4 Unscrew 3 screws connecting parts of the housing with Hex L wrench 5 Open the housing 6 Feed on the necessary cables through the cable channel and screw on cable clamp for cable channel sealing 7 Screw on housing to the bracket with 4 screws Connect housing power cables to terminal FTB 1 with proper polarization refer to previous page 9 Dismount mounting base unscrew 4 screws 10 Screw on camera to the mounting base with additional skrew Remember to use isolation separator and isolation washer for camera isolation Refere to Picture below Camera Mounting base Mounting base Isolation washer Camera mounting screw The camera mounting place sholud be chosen depending on camera lens length CAUTION It is not advised to install camera lens kit directly above heate
5. d be operated only from the type of power a source indicated on the marking label If you are not sure of the type of power supplied to your location consult your product dealer Do not overload power supply and extension cords as this can result in a risk of fire and or electronic shock Use Certified Listed Class 2 power supply transformer only 11 Power cords and cables should be led in a way that protects them from being damaged All rights reserved AAT Holding sp z o o 3 NVH 250H 230 I1 NVH 250H 12 24 II users manual v 2 3 WARNINGS 12 For protection of the equipment during a lightning storm or when it is left unattended and unused for long periods of time unplug the unit Disconnect any antennas or cable systems that may be connected to the equipment This will prevent damage to the equipment due to lightning or power line surges 13 Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock 14 This unit is designed for indoor use only and it must not be exposed to rain or moisture 15 There are no user serviceable parts inside this unit Only authorized service personnel may open the unit 16 Unplug the unit and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen in to the unit c Ifthe unit has been exposed to rain or wat
6. e or the shop where you purchased the product RoHS Directive 2002 95 EC Out of concern for human health protection and friendly environment we assure that our products falling under RoHS Directive regulations regarding the restriction of the use of hazardous substances in electrical and electronic equipment have been designed and manufactured in compliance with mentioned regulation Simultaneously we claim that our products have been tested and do not contain hazardous substances exceeding limits which could have negative impact on human health or natural environment Information The device as a part of professional CCTV system used for surveillance and control is not designed for self installation in households by individuals without technical knowledge The manufacturer is not responsible for defects and damages resulting from improper or inconsistent with user s manual installation of the device in the system All rights reserved AAT Holding sp z o o 2 NVH 250H 230 I1 NVH 250H 12 24 II users manual v 2 3 WARNINGS ATTENTION THE KNOWLEDGE OF THIS USER S MANUAL IS AN INDESPENSIBLE CONDITION OF A PROPER DEVICE OPERATING YOU ARE KINDLY REQUESTED TO FAMILIARIZE YOURSELF WITH THIS MANUAL BEFORE STARTING THE DEVICE THE MANUAL SHOULD BE KEPT FOR FUTURE USE CAUTION ALL REPAIRS CAN BE EXECUTED ONLY BY QUALIFIED STAFF OF THE AUTHORISED AAT Holding SERVICE CAUTION PRIOR TO UNDERTAKING ANY ACTION TH
7. er d Ifthe unit does not operate normally by following the operating instructions e Ifthe unit has been dropped or the cabinet has been damaged f When the unit exhibits a distinct change In performance this indicates a need for service 17 Do not attempt to service the camera yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel 18 After any service operations test the camera and functionality of all camera attachments accessories 19 The camera should be powered from the 24 VAC adapter The adapter power required for camera proper operation should be equal or higher than 20 W for camera module only and 80 W for a camera with a fan and heater INFORMATION Data included in the following users manual is up to date at the time of printing AAT Holding sp z o o holds exclusive rights to modify this manual The producer reserves the rights for device specification modification and change in the design without prior notice All rights reserved AAT Holding sp z o o 4 NVH 250H 230 I1 NVH 250H 12 24 II users manual v 2 3 MAIN CHARACTERISTIC 1 MAIN CHARACTERISTICS External housing for compact cameras Die cast aluminium costruction with powder coat stove finished glass window Internal heater allows to operate in temperatures from 40 C to 50 C Heater power supply 230VAC or 24VAC 12VDC depending on mode
8. l housing power supply information is definited in housing name after mark Degree of protection IP67 Mounting bracket included 2 PACKAGE CONTENTS The package should contain the following elements Housing lpcs Bracket lpcs User s manual Ipcs Mounting screws 4 pcs Plastic anchores and screws for wall bracket mount 3 pcs Isolation separator isolation washer camera mount screw I pcs each Allen L Wrench l pcs If the equipment has been damaged during transport or is incomplete the contents of the package should be packed back to the original box Contact the local AAT Holding distributor for further assistance 3 SPECIFICATIONS Housing model and type NVH 250H 12 24 II Type External for compact camera bracket with cable channel Heater Degree of protection IP 67 KHK O anual All rights reserved AAT Holding sp z o o m 5 NVH 250H 230 II NVH 250H 12 24 II user s manual v 2 3 SPECIFICATIONS 3 1 Dimensions details INTERNAL SPACE FOR CAMERA AND LENS MOUNT 250 L x 105 W x 80 H mm dao 450mm EL 03mm J 135mm A SCREW 1 4 20 5 F 415mm 3 x M6 SCREW HOLES All rights reserved AAT Holding sp z 0 0 6 NVH 250H 230 II NVH 250H 12 24 II user s manual v 2 3 SPECIFICATIONS 3 2 Housing elements Main parts of NVH 250H II housing Top Bottom Bracket Unscrew 4 screws to open housing by drawing b
9. r shield Heat emited from the heater may cause grease evaporation from mechanical part of lens It can damage lens mechanism 11 12 13 14 Screw on mounting base with camera to bottom part of the housing Longitudinal holes allow to set camera possition according to the heater Connect power and other necessary signals to the camera Use TB 1 terminal connectors Check and if necessary set lens focal length and sharpness Close the housing All rights reserved AAT Holding sp z o o 9 2011 01 31 V 2 3 NOVUS AAT Holding Sp z 0 0 ul Putawska 431 02 801 Warszawa tel 22 546 05 46 fax 22 546 05 01 www aat pl
Download Pdf Manuals
Related Search