Home

USER MANUAL

Contents

1. Security Settings Internet Zone E38 Security Settings Internet Zone Settings Settings 0 Binary and script behaviors tJ Initialize and script Activex controls not marked as safe for s Administrator approved Disable recommended Disable Enable not secure XC Enable gt C Promet 2 Display video and animation on a webpage that does not use 3 Rimae controls and plug ins Disable Administrator approved ann O Download signed Activex controls Enable 7 rronmp Disable Enable not secure Script ActiveX controls marked safe For scripting Prompt recommended Disable Download unsigned Activex controls Disable recommended Prompt Enable not secure a8 Downloads Prompt g sf Automatic prompting For File downloads 4 Initisliza SAA TATA Chive cankrole not marbad se cafe For c nicahla lt li gt lt i Takes effect after you restart Internet Explorer Takes effect after you restart Internet Explorer Reset custom settings Reset custom settings Reset ta Medium high default vl v 23 5 2 Connection with the Search Tool To open the software double click the ConfigTool exe icon on the CD supplied with the product To search for devices connected to the network Click the Refresh button the tool will search for devices connected to the network and display them in
2. Net Storage Mon Tue Wed Emergent Storage Local Thu Fri Sat Cancel Syn Data 37 Refer to the following sheet for detailed information Crm HN Select a channel first Input pre record value here System can record the three to five seconds video Pre record a hee before activating the record operation into the file Depends on data size System support record snapshot file local storage mode only Click set button to go to the corresponding setup interface Set schedule period and select corresponding record or snapshot type motion detection snapshot and alarm snapshot System does not support schedule snapshot function Select date Current setup applies to current day by default Select all to apply the setup to the whole week After complete setup go back and click save to save current time period setup A Click save button after complete setup for one channel or complete the whole setup and click save button Click this button to get device latest configuration information Note System does not support regular recording on SD card 7 2 4 RS232 E Control Panel 9 R5232 SRE AA Info RS232C0M COM 01 M BP HDD INFO Ef LOG Fl fp System Config Data Bits l l E GENERAL m ENCODE Stop Bits 1 g SCHEDULE gt E Baudrate 115200 NETWORK m a ALARM Parity None 7 il DETECT
3. 7 3 6 Snapshot Configuration E Control Panel J SNAPSHOT f Query System Info Channel Channel 01 3f VERSION be INFO Snapshot mode Snapshot Timing 47 System Config Frame Rate 1F S 3 GENERAL Ba ENCODE Resolution 1080 hd a SCHEDULE 3 R5232 Quality 80 3 NETWORK fa ALARM DETECT A PAN TILT ZOOM 3 DEFAULT BACKUP f ADVANCED a HDD MANAGEMENT a ABNORMALITY Ea Alarm IjO Config Record 3 ACCOUNT SNAPSHOT 3 AUTO MAINTENANCE ADDTIONAL FUNCTION Save Refresh Refer to the following sheet for detailed information e HN Monitor channel Snapshot mode Two modes Timing and activation Select from the dropdown list The value ranges from 1f s to 8f s Select from the dropdown list The resolution may vary due to different series Select from the dropdown list Here is for you to set video quality 54 7 3 7 Abnormity Configuration E Control Panel es ABNORMITY Bf Query System Info 9f VERSION gt ioe us Event Type Disk No Space v Iv F System Config Threshold no 0 99 a GENERAL a ENCODE a SCHEDULE iw Alarm Qut g Ba R5232 NETWORK fa ALARM T B baker MO sec 107300 Ea PAN TILT ZOOM 3 DEFAULT BACKUP amp ADVANCED EE HDD MANAGEMENT iv Send Email c3 ABNORMITY a Alarm I O Config a Record a ACCOUNT a SNAPSHOT a AUTO MAINTENANCE E ADDTIONAL FUNCTION 3 Config 3 Auto Register a Wireless 3 IP Filter a Talk Enco
4. Input 01 iv E i0 sec 107300 1 ho sec 107300 45 Type Normal Close Anti dither lo sec 0715 Default cave Refresh Event Type It includes local alarm network alarm Local alarm Device detects alarm from input port Network Device detects alarm from network Select corresponding alarm channel Check to enable the alarm function Type There are two options normal open and normal close NO becomes activated in low voltage NC becomes activated in high voltage Period Alarm record function becomes activated in the specified periods There are six periods in one day Enable corresponding period Select date or whole week Click OK button system goes back to alarm setup interface please click save button to exit System only memoryze one alarm during the period set here 0 to 600 s Normal Out Select alarm output port so that system can activate corresponding alarm device when alarm occurs Alarm Latch System delay the alarm output for specified time after alarm end from 10 seconds to 300 seconds Record Channel System auto activates current channel to record once alarm occurs working with alarm activation function Note current device shall be in auto record mode Chapter 7 2 3 Schedule Record Latch System can delay the record for specified time after alarm ended The value Pagar pamangan gana aaa ar aa amagang from 10s to 300s Email 0 Check to enable email functi
5. 3 Alarm I O Config 50 50 50 3 Record Ea ACCOUNT 0 100 0 100 0 100 3 SNAPSHOT Scene Mode Auto wi A AUTO MAINTENANCE ADDTIONAL FUNCTION 3 Auto Register config 3 Talk Encode Yv On Refer to the following sheet for detailed information meme Fdo Monitor channel 1 There are two modes Auto exposure AE and Manual exposure ME Exposure Mode There are some ME time ranges from 1 50 to 1 10000 It supports customized setup too may be different depending of the device IPC day night mode switch There are three options color off color on auto may be different depending of the device Signal Standard Video input mode internal input It is to switch video up and bottom Day Night Mode 56 7 4 2 Auto Register Configuration E Control Panel Bf Query System Info Bf VERSION 3f HDD INFO Ef LOG iv Enable System Config 3 GENERAL 3 ENCODE 3 SCHEDULE 33 R5232 E NETWORK 73 ALARM 73 DETECT E PAN TILT ZOOM Port fo 3 DEFAULT BACKUP ADVANCED ecc uen fm a Alarm I O Config 3 Record 2 3 ACCOUNT 3 SNAPSHOT 3 AUTO MAINTENANCE H E ADDTIONAL FUNCTION Auto Register 3 Config 3 Talk Encode Auto Register Refresh Refer to the following sheet for detailed information Enable Enable auto register function Device management server number Po Device management server IP address Port Server port number Device ID Device ID in
6. Refresh R Login IL Logout C OOOO O OO 15 To connect to a device and open the web application Highlight it single click in the list Right click the highlighted line Configlool Device List SK I Address Port Subnet Mask Default Gat Mac Address Ex Stitt 255 255 52 54 4c 90 5d 3ft 255 255 D TUE 52 54 4c d 58 e4 STTT 255 255 D T U 92 94 4c d 58 51 amiT 255 255 D T U 00 05 23 16 24 48 Stitt 255 200 0 ERU c fa 35 37 168 0 108 255 955 D IT 10 7 2 61 255 255 0 Ue ad 00 12 Tip You can click login button directly and Refresh WB Logout then input corresponding information to login Refresh Login L Logout E Click on Open Device Web The following web page opens WEBservice Windows Internet Explorer BL S OAA m GO einwinoisis Wes oe nere jie ee bwin D E Be pager G took WER Services v If the connection fails either the camera does not have an IP address in the same segment as the PC see chapter 4 1 2 to change it or the Internet Explorer security parameters are not set correctly see chapter 5 to change them 16 4 1 2 Connection with the configuration tool to change the IP address or upgrade a device s internal software To search for devices connected to the network Click the Refresh button the tool will search for device
7. 5 PANJTILT ZOOM a DEFAULTJBACKLIP Sts ADVANCED 3 HOD MANAGEMENT 3 ABNORMITY 3 Alarm O Config Record 3 ACCOUNT 3 SNAPSHOT Ca AUTO MAINTENANCE H E ADDTIONAL FUNCTION Function Console Save Refresh 38 Refer to the following sheet for detailed information mee tanana RS232 There is only one option COM 01 corresponding to RS232 Console is for Pecan oan vare mere wm rrr ro RE Control Control keyboard Switch between RS232 and control keyboard Switch between RS232 and control keyboard Network keyboard COM control protocol You can use network keyboard to control IPC via COM Function eue UT COM Network user can communicate with RS232 COM device ERI box not used r OT E GPS not COM GPSnotued 00 COM RADAR not COM RADARnotused 00 7 2 5 Network Network interface Configuration E Control Panel NETWORK Bf Query System Info Ethemet Port Port 01 w DHCP f VERSION 2 HDD INFO IP Address 10 I 5E 20 Mac Address 00 11 22 33 45 55 Sf LOG Subnet Mask 255 255 0 O System Confi p jaa Gateway TU x2 m UP fa ENCODE 3 SCHEDULE Device Name 00 11 22 44 55 a R5232 TCP Port 37777 HTTP Part 80 2 Wa UDP Port 37778 Max Connection 4 DDNS Preferred DNS 202 101 172 35 NAS WT Altemate DNS 202 101 172 35 Ui P TICUER Transfer zi 3 ALARM 73 DETECT DE PAN TILT ZOOM Service Type MULTICAST x 3 DEFAULT BACKUP Qu
8. A Za z0 o http update micro 9 http www windowsup Edit C X A htp 10 15 5 127 Yy Googe P2 Most Visited Getting Started Latest Headlines View History Bookmarks Tools WEB SERVICE Te Note If you have done the follows above and you still can not open the web normally you need to check the setting in IE to enable downloading of the ActiveX Internet Options X Security Settings Internet Zone General Security Privacy Content Connections Programs Advanced Settings lt wi ActiveX controls and plug i Select a zone to view or change security settings WA Allow previously unused ActiveX controls to run without pror e 97569 P Internet Localintranet Trusted sites Restricted WA Allow Scriptlets Internet This zone is For Internet websites a Prompt PERA EUM in trusted and WA Automatic prompting For ActiveX controls Disable Security level For this zone Binary and script behaviors Administrator approved Custom Disable Custom settings To change the settings click Custom level To use the recommended settings click Default level GAE aga ag NGA MAN T nma ab p Ene Ea eii re M iil gt Takes effect after you restart Internet Explorer Custom level Default level Reset custom Sey Reset to Medium high default x Reset all z
9. Da ACCOUNT De DNS Bf Query System Info Event Type 3f VERSION 2f HDD INFO Alarm In Ff LOG System Config Lj GENERAL Period a ENCODE Ca SCHEDULE j Normal Out 3 RS232 FI S dL BA Latch a DETECT M Channel E PAN TILT ZOOM Record Latch 3 DEFAULT BACKUP V Send Email A HDD MANAGEMENT V Tour 3 Alarm I O Config V PTZ Activatio m CE AUTO MAINTENANCE 5 ADDTIONAL FUNCTION Copy dell c3769d3861 Unknown Broadcom Netktreme 57xx Gigabit Cont 66 1D 69 2F 4E CC 180 10 2 144 255 255 8 8 202 101 172 35 221 12 1 228 ts and Settings wubing gt ALARM Local Alarm Input 01 viN Type Normal Close v Set nti dither 0 sec 15 lala 10 sec 10300 dighede nle eje uje penis ie V Show Message T ejs s e e of sof 1 1219 sa sis Set eeehe Save Refresh 79 Annex 6 Routers configuration If you need to access to your device from external network you will need to set NAT settings on your router In the circumstance that your device is behind a router or gateway you need to open the port on that router for the device behind it IP 192 168 0 108 Port 37777 TCP and 80 HTTP SWITCH ROUTER jp INTERNET Local IP 192 168 0 1 Public IP 60 191 94 100 IP 192 168 0 109 Port 37779 TCP and 81 HTTP ROUTER NAT Settings IP Address Private Port Public Port Enable Disable Local IP HTTP TCP Public IP HTTP TCP Port Port P
10. ESO Eb 25 36 5 There are six sections Section 1 Monitor channel menu tree Section 2 System menu Section 3 PTZ control Section 4 Video setup and other setup Section 5 Preview window Section 6 Monitor window switch 27 6 2 Monitor Channel Menu Tree The monitor channel menu tree is shown below Ss CAM 1 Open All Refresh StatDialog T Local Play Refer to the following sheet for detailed information eme kaa CAM 1 Monitor channel 1 IP Camera supports main stream and extra stream Main stream In normal network width environment main stream can record video and audio and realize network monitor Extra stream If network width is not sufficient you can use extra stream to realize network monitor Note the extra stream resolution shall be less than main stream resolution Open all Close all Click this button to open all video channels Once all video channels are open this button becomes Close all Start dialog Click this button to enable audio talk Audio compression type G 711a default PCM etc Local play Click this button to select recorded file into the local PC to play it in the web interface Refresh Click this button to refresh monitor channel name 6 2 1 Live Monitoring Left click on camera name to view real time video the monitor is show below YO QG 8 6 89 Q9 2009 02 12 10 315 DEO Tha Li dla hannal T 28 Refer to the foll
11. the web browser client from public network will be able to connect to this device by connecting to the router s IP address 81 2 LINK SYS Router Log on to the router Select Applications amp Gaming tab on the top Select UPNP Forwarding tab on the left Then the following screen will be displayed The screen might be very different regarding to the different model of routers LINKSYS 4 Owtsonot Sisco Spiers inc Etherfost Cable DS Applications 4 Gaming Applications amp Gaming PrP Torwerdng Ahu stir situa uor intl ort if Address Enabicd e 1 ec mg M r Tenet 3 p im n r su 5 eco DE o r ONS 3 c e 5 p r IE tS ce e o D free ig er ps fo r HITA s0 e c feo fo r POPS n 6 1 0 o r NNTP 118 ecc ns NN r sie 151 c e fier o z TE Jee R o z L IR j 66 RW D r rT co RW D x e iae k j n r IP Ie E r You can add entry on the first available row in the list table In the Application box type in the entry name you want to use For example MyDVR Service for the service port we are opening for DVR s remote service In the Ext Port box type in the service port you put in the DVR s network setting For example 4000 Select TCP button In Int Port box type in the same port number you put in Ext Port box For example 4000 In IP Addr box type in the last decimal digit of your DVR s IP address For example the device s IP address i
12. 2 3 4 input port the external alarm device ground end RS485 port to connect to the control devices such as speed dome PTZ Connect to the wireless antenna to receive WIFI 3G and et signal 10M 100M self adaptive Ethernet port Connect to the network cable Input 12V DC Alarm output port Output alarm signal to the alarm device Zen alam output NO C 1 NO alarm output 1 NO C 2 NO alarm output 2 13 3 3 Rear Panel 4ch NVS Refer to the following sheet for detailed information ___Fortname cmmacion Fensen 4 video input ports to receive the signal from Video input port the front end device such as camera or speed dome 4 audio input ports to receive the analog PUOI pUSPOE audio signal from the pickup or mike 1 video output port to output analog video signal It can connect to the TV monitor to view video SD SDecardport Input SD card 1 4 channel alarm Alarm input port to receive the relay signal 1 2 34 iur port from the external alarm device Video output port n No 1 Alarm output port Output alarm signal to the alarm device 2 ch alarm output NO C 1 NO alarm output 1 NO C 2 NO C 2 NO alarm output 2 RS485 port to connect to the control device such as speed dome PTZ 10M 100M self adaptive Ethernet port 12VDC Input 12V DC power 14 4 Quick Configuration Tool The quick configuration tool allows you to search for a device s IP address even
13. ADVANCED EE HDD MANAGEMENT DE ABNORMALITY Ea Alarm I O Config 3j Record Ea ACCOUNT EE SNAPSHOT EE AUTO MAINTENANCE lj ADDTIONAL FUNCTION Color Setting Brightness pe 07100 Bit Rate Kb s Reference Bit Rate Frame Color Setting Overlay Cover Area iv Time Display Copy Contrast Br 07100 8132 bs 3584781 92K bps 50 257150 Set NEVER Set Bit Rate Kb s Reference Bit Rate 112 540Kbps 30 157150 IV Watermark Set Frame esu iv Channel Display Default Refresh Saturation Hue o o 50 07100 35 E 07100 07100 Refer to the following sheet for detailed information It includes general stream motion stream and alarm stream Select different encode frame rates form different recorded events Main Stream For example use high frame rate to record important events record scheduled event in lower frame rate and set different frame rates for motion detection record and alarm record Extra Stream Select extra stream to enable the extension stream to monitor Main stream Recorded file only contains video by default Check the audio box here to enable audio function Audio Video Extra stream Recorded file only contains video by default Check the audio box here to enable audio function Resolution There are multiple resolutions Select from the dropdown list For each resolution the recommended bit stream value is different Frame
14. ADVANCED User Name IP Address 239 255 42 42 a HDD MANAGEMENT Da ABNORMALITY Password Port 35666 1785535 Ea Alarm I O Config 3 Record a ACCOUNT 3 SNAPSHOT 73 AUTO MAINTENANCE 53 ADDTIONAL FUNCTION 39 Refer to the following sheet for detailed information meme mm Select the network card first Ethernet Port 1 is the ethernet port Port 2 is the wireless port if available Dynamically get IP address Get the device IP adress from the server if this DHCP EC function is enabled Device ID in the network TCP Port Default value is 37777 HTTP Port Default value is 80 UDP Port Default value is 37778 Manually set IP address of DNS You need to enable this function if you are inputting the domain name in some Alternative DNS items Otherwise the system can not parse the domain name Simultaneously network users max amount The value ranges from 1 to 10 Network Set the priority between fluency and video quality or self adaptive transmission System can automatically adjust the bit stream or lower the resolution according QoS to the network bandwidth Advance interface Service Type MULTICAST z User Name IP Address 239 255 42 42 Password Port 36666 1765535 Multiple Set MULTICAST address and port cast Enable function group Current series IPC does not support this function right now Remote Input the PPPoE user name and password you get from the IPS internet H
15. CHANNEL NAME 3 HDD MANAGEMENT 3 ABNORMALITY Ea Alarm I O Config Da Record Default Path C Documents and Settings 10881 Desktop 33 ACCOUNT Export Config Import Config 3 SNAPSHOT Ea AUTO MAINTENANCE 9 ADDTIONAL FUNCTION Config Backup Refer to the following sheet for detailed information mee meen Select All Restore factory default setup Export Export system configuration to local PC Configuration Import Import configuration from PC to the system Configuration 49 7 3 Advanced 7 3 1 HDD Management HDD management includes net storage management and local storage management Select the storage device first and then the items on your right become valid Check the corresponding item here Click the Execute the button system needs to reboot to activate current setup Config i Control Panel HDD Management Bf Sys Info HOD Management Uf Version HDD BA HDD INFO Local 01 Format Bf Los jf System Config C Read irite 3 General Config 3 Encode Config C Schedule 3 RS232 3 Network 3 Alarm 3 Detect 3 Default Backup Ro Advanced c3 HDD Management E Abnormality Hot Plug 53 Alarm I 0 D Record Rauh Account 3 Snapshot 3 Auto Maintain 3 Additional Function aj Auto Register 3 Config C Read Only Refer to the following sheet for detailed information Dem Fm Clear data in the disk Read write Set current disk as read write Read only Se
16. Ge e le 10 10 3 16 Ra es x ve Wee GS WEB SERVICE n 7 dh Et z267 IRO e Internet 75 E Donotsaveencryptedpagestodsk al C Empty Temporary Internet Files folder when browser is clc W Enable DOM Storage ated Windows Authentication E Enable Enable nat Use SSL 2 0 Lise SSL 3 0 Use TLS 1 0 Warn about certificate address mismatch m Wann if changing between secure and not secure mode Isi si 3 3 lt LESS Warn if POST submittal is redirected to a zone that does n 4 n P Takes effect after you restart Internet Explorer Reset Internet Explorer settings Resets Internet Explorer s settings to their default meere Reset You should only use this if your browser is in an unusable state Note If you have done the follows above and you still can not open the web normally you need to check the setting in IE to enable downloading the Activex Internet Options General Security Privacy Content Connections Programs Advanced Settings ei Activex controls and plug in Select a zone to view or change security settings Allow previously unused ActiveX controls to run without pron ke a Jf Disable Internet Local intranet Trusted sites Restricted m Allow Scriptlets sites C Disable Internet Q This zone is for Internet websites Prompt except those listed in trusted and PAN aane a e L prompting For
17. IR Reset ACT Net ALM Video R3232 Refer to the following sheet for detailed information When connected to power Red When device is working normally Green Red Green light is on When device is upgrading Green light is flashing NET Wireless network Geen Wireless connection ok light is on status indication light Wireless network is abnormal light is off Device is armed Light is on There is data transmission Light is flashing Device is disarmed Light is off Power working status indication light Alarm status indication light Video Transmission record Video transmission is normal Light is on status indication light Video transmission is abnormal Light is off For common COM debug configure IP address to transmit transparent COM data Audio input port SPK EN Audio output port wc w s cs IR remote control port To receive the IR control signal from the remote controller Device reset button Press it for 5 sto restore factory default setup 12 3 2 Rear Panel 1ch NVS Refer to the following sheet for detailed information V IN Video input port BNC Receive the signal from the front end device such as camera or speed dome Output analog video signal DEM Video output port It can connect to the TV monitor to view video Audio input port Input analog audio signal SD card port Input SD card 1 4 channel alarm Alarm input port to receive the relay signal from 1
18. Rate The frame rate may vary due to different resolutions When the resolution type is 3M 1 15f s For other resolutions 1 25f s Bit Rate Type There are two options VBR and CBR Qualit The value ranges from 1 to 6 The level 6 is the best video quality 4 This setting is available only with VBR bit rate In CBR the bit rate here is the max value In dynamic video system needs to low frame rate or video quality to guarantee the value Bit Rate The value is null in VBR mode Refer to recommend bit rate for the detailed information Recommended Bit Recommended bit rate value according to the resolution and frame rate set Set the P frame amount between two frames The value ranges from 1 to 150 Default value is 50 Recommended value is frame rate 2 Set video brightness contrast hue saturation and gain Color Setting The value ranges from 0 to 100 Altar a sik Select watermark bit stream watermark mode and watermark character Default character is Digital CCTV Cover area privacy Set privacy masks mask System max supports 8 privacy mask zones Enable this function to overlay time information in video window OSD transparent value ranges from 0 to 255 0 means complete transparent Use the mouse to drag the time tile position Frame Time Title You can enable this function to overlay channel information in video window OSD transparent value ranges from 0 to 255 0 means complete transparent Use the mouse
19. SERVICE t H geh gt Pager Safety Tool EX cant S can 9 cam 3 8 cam 4 E cams 8 cams E caM 7 E cams E camo 8 CAM 10 E CAM 11 E cam 12 E can 13 E CAM 14 E CAM 15 E cam 16 Meonyitas Frissites Beszed Y Helyi 1 1 Use the Compatibility View function of IE8 With this way every time you open the IE interface must click this button Compatibility View often look better und problems such as oul of place menus images or text will be corrected websites designed for older browsers will For IE8 if the interface is abnormal please click the buttom 1 2 Add the certain IP address or website into Compatibility View Settings Choose Compatibility View Settings in Tool menu WEB SERVICE Windows Internet Explorer c Vv e 10 10 5 81 File Edit View Favorites se Favorites w SERN Delete Browsing History Ctrl Shift Del ee ee InPrivate Browsing Ctrl Shift P Reopen Last Browsing Session InPrivate Filtering Ctrl Shift F InPrivate Filtering Settings Ed cM 1 Kilepes Pop up Blocker L E cM 2 SmartScreen Filter gt E CAM 3 Manage Add ons 8 CAM 4 Compatibility View CAM 5 Compatibility View Settings E cAM 6 E cAM 7 car e Ge ca Windows Update a cama Developer Tools e cam 10 windows Messenger amp 38 CAM 11 Sun Java AG 8 CAM 12 Internet Options cam 13 E cam 14 re astani Choose Compatibility View Settings E
20. TTL 52 Reply from 226 181 15 112 bytes 32 time 42ms TTL 52 Ping statistics for 226 181 15 112 Packets Sent 4 Received 4 Lost z loss Approximate round trip times in milli seconds Minimum 42ms Maximum 53ms Average 44ms C Documents and Settings Wwubing gt Note Do not copy the information in this sample configuration It is different according the setting on each device The picture above shows an example of how to open the service port on router for a device in local network Check the Enabled button In Name box type in a name for this router s entry For example myDVR s Remote Service In Private IP box type in the IP address of device which is the IP you put in IP ADDRESS field in Network setting menu on device For example 192 168 0 102 Select TCP in Protocol Type drop down menu In both Private Port and Public Port type in the service port number In above example it is 4000 The port number is the port that you put in TCP PORT field in NETWORK menu on the device Select Always button After click Apply the service port 4000 will be opened on the router for the device on 192 168 0 102 The device Net View and other client tools will be able to connect to this device from public network by connecting to the router s IP address Follow the same process add another entry for HTTP Port service After this service port is open
21. high default x Resetto Medium high default vi Annex 5 Email Function First the Email sender must support smtp 1 Email Setting 1 Set as follow use Email server www 126 com as an example Configuration E control Panel EMAIL zB QU system Info SMTP Server 220 181 145 112 iv Enable cf VERSION B HDD INFO Port 125 0765535 Ef LOG User Name user d IERT System Config Passed GENERAL 3 ENCODE Sender user 126 com 3 SCHEDULE Subject m 3 R5232 R Da NETWORK eceiver 1 po c3 EMAIL Receiver 2 pr Receiver 3 a NAS NTP 3 IP FILTER a ALARM 3 3 DETECT 73 PAN TILT ZOOM 3 DEFAULT BACKUP amp ADVANCED a HDD MANAGEMENT a ABNORMALITY 73 Alarm I O Config 3 Record a ACCOUNT a SNAPSHOT A AUTO MAINTENANCE g ADDTIONAL FUNCTION Save Refresh J E a sm zo WINDOWS syst em32 cad ex 4 Microsoft Windows amp P Chie AS 5 1 2666 lt C gt HRALPTA 1985 2001 Microsoft Corp C Documents and Settings wubing gt ping smtp 126 com Pinging smtp 126 split netease com 226 181 15 112 with 32 bytes of data Reply from 226 181 15 112 bytes 32 time 53ms TTL 52 Reply from 226 181 15 112 hbytes 32 time 42ms TTL 52 Reply from 226 181 15 112 hbytes 32 time 42ms TTL 52 Reply from 226 181 15 112 bytes 32 time 42ms TTL 52 Ping statistics for 220 181 15 112 Packets Sent 4 Received 4 Lost z loss gt D Approximat
22. menu SEARCH CONFIG View current web client information W ebrec Control Version z 1 5 28 HETSDK Version 3 37 D 4155 PLA SDE Version 2 37 0 4364 Copyright C 2008 62 LOGOUT 11 Log out See chapter 6 3 to see how to access to the configuration menu SEARCH CONFIG LOGOUT System goes back to log in interface WEBservice Windows Internet Explorer 2 f Sy TI G e http 10 10 3 16 wales X tede Dod od WEBservice m dmh v Page Jj Tools WER service ver Nene EBENHEIENINIEEI Password Done LE Internet amp 100 7 i 63 Annex 1 No IP DDNS If you do not have a Static IP address on the Internet you need to have a dynamic IP Because your IP address changes after a certain period of time So you need to configure a dynamic DNS service After completed configuration in the device DDNS service can constantly inform the latest device s connection IP and modify its IP on the table of data from the server Then you have a constant domain name in the Web browser along with the HTTP port send a request to identify the car IP of the domain name typed The server will redirect the domain name to the IP connection thus allowing access to the device which does not have a fixed IP in the network Note It is important to note that to gain access to the device in a local network it is necessary to redirect the port of you
23. prompting For File downloads T coh Trav conkrole mak marked se cafe Far c 83 Nieshle i gt M Takes effect after you restart Internet Explorer Takes effect after you restart Internet Explorer Reset custom settings Resetto medium high default h Reset custom settings Resetto Medium high default v 69 Annex 2 Using Google Chrome 1 Download and Install Extension Click Extension in Google Chrome configuration dropdown list to go to the extension management interface 5 x gt D New tab Ctrl T Nev window Chrl hy New incognita window Ctrl ShiFk h w Always show bookmarks bar Ctril B Full screen Fil History Ctrl H Bookmark manager Ctrl ShiFt 6 Downloads Ckri J Extensions Synchronize my bookmarks Options About Google Chrome Help Fi Exit The Google Chrome extension management interface is shown below CES NO Q fi i chrome extensions Extensions Extensions Boo No extensions installed Want td browse the gallery Instead Click Browse the gallery and search for IE Tab extension Q ft y httpsi chrome googe com extensions search q IE Tab Goegle chrome extensions et a Extensions Results 1 10 of 13 for IE Tab Most popular e IE Tab by ietab blackfishsoftware com Most recent yeee 486 62 873 users Top rated Display web pages using IE in a tab akun ol 70 Instal
24. setup e Server IP Enter the IP noted in step 10 e Port Enter the port 80 e Domain Name Enter the domain name created in step 8 User Enter your username email address created in step 3 e Password Enter the password created in step 3 Now you have completed device setup Open Internet Explorer in another foreign network with Internet access unlike the network where the device is connected to you need to follow the steps listed below 1 Enter the address into your browser http nome the field created in step 8 For example http vd16s480st no ip biz 2 If the device HTTP port is 80 just type the domain name Otherwise enter in the browser address as http nome the field created in Step 8 port number of HTTP For example http vd16s480st no ip biz 9090 3 Press Enter The system will ask install application webrec cab control or not Please click Yes to perform a successful connection 4 If the page does not appear on the computer screen you need to lower your system safety setup From Tools Internet Options Security select Internet and then click Custom Level you can enable ActiveX controls See below Then open your browser and re enter the domain name of the device 68 Internet Options General Security Privacy Content Connections Programs Advanced Select a zone to view or change security settings o amp O Internet Localintranet Trusted sites Restricted Sett
25. the form of a list Highlight the device required single click in the list Right click the highlighted line Configlool Device List SN IP Address Port Subnet Mask Default Gat Mac Address 10 T 6 4T Srii 255 255 52 54 4c 90 5d IU T8 21 3T 255 255 D LESE 52 54 4c d 58 e4 10 T 10 104 3iTiT1 255 255 D PCS 92 94 4c d 58 51 10 T 2 2 JTTIT 255 255 D aTe 00 05 23 16 24 48 ID T T 113 TTT 299 255 D bs Ub gt a 35 3T 10 T 10 91 239 205 0 0 s 45 23 65 192 168 0 108 295 255 D 90 5T db 10 T 2 B1 255 255 0 WETS ad 00 12 1 2 3 4 5 6 T 8 Tip You can click login button directly and Refresh QU Logout then input corresponding information to login Refresh R Login L Logout C Click on Open Device Web The following web page opens WeEBservice Windows Internet Explorer GE ginsuno1349 Bises few m Kt wese ian BD WER Service 24 5 3 Connection with Internet Explorer IP camera factory default setup IP address 192 168 1 108 User name admin Password admin Open Internet Explorer IE and enter your camera IP address in the address bar For example if your camera IP is 192 168 1 108 then enter http 192 168 1 108 in the IE address bar Blank Page Windows Internet Explorer gang SAS MH e about blank We Be bie
26. 000000 24 5 3 Connection with Internet Explorer 000000000000000000 0000000900000000 Qa UFU PE YU EVEN ERR Ev SENE GROUP Vg daa nau v de 25 SALOI Nm 25 Main Interface Introduction 0000000000000000000000000 000000000 000000000 0000000000000000 000000000000 000000000 0e00 0000000 27 BT ar m 27 6 2 Monitor Channel Menu Tree_ 000000000000000000000 eee eee eee 00000000000000 0000 0000000000000000 00000000000000 00000000 28 6 3 System MENU m 29 6 4 Monitor Window Switch 000000000000000000000000000000 0000000000 00000000000000 0000 00000000000000 0000 00000000000000 00000000 30 6 5 Preview Window Switch 000000000000000000000000000000 0000000 00000000000000 0000000 00000000000000 eee 00000000000000 00000000 30 0 0 PIL COMGION sanane nani aka 30 6 7 Color and More S tu sessie a aaa 31 CODROQUES Siseoiuisitinipienestuspesiqiebnivpiad DOA AA TAA E BAKA A AG BAANG aaa NAGA NAN TE DR NE TENE 32 7 1 System Informatioli riris aa SANA Ba a ANG DANING a Dia AN EEN BANGAT e Uri KANAN 32 7 2 System ConfigurallOn sasisaning DAN Da NANA Na NGANTANG AAN GAN ee EY YEARS RU ga Aa Ga a aga Na 34 DoS ors M c aka nia nag a Kana a di aaa a aa baa aaa ai a Dak aa a baa kaa a aaa a akas ana aa NG anakan 50 7 4 Additional FUN CUO ss asasaran aaa naba a IDE iga a b
27. 18 2003 07 23 10 14 28 2003 07 23 10 27 20 Log types include system operation configuration operation data management alarm event record operation user management log clear and file operation Select log type from the drop down list and then click search button to view the list Clear Click this button to delete all displayed log files System does not support clear by type Click this button to backup log files To export logs click backup button the following interface appears Save As Save in 9 ERES My Documents 3 My Computer IM Network Places File name Save as type ue File log l Cancel 33 7 2 System Configuration Please click save button to save your setup before exiting each section 7 2 1 General Setup Set system time record length video format etc Configuration Control Panel GENERAL E E Query System Info i 2011 117 153219 Save Sync PC He Fal ync BF VERSION System Time LZ Bf HDD INFO Ef LoG Date Format YYYY MM DD wi M DST Set jf System Config D Sj GENERAL ate Separator 7 og ENCODE Time Format 24 40UR l ln SCHEDULE Language ENGLISH 7 Ba R5232 Da NETWORK HDD Full Overwrite ALARM ig AL Pack Duration go Minds E DETECT Ea PAN TILT ZOOM Device No E DEFAULT BACKUP Video Standard PAL m ADVANCED DE HDD MANAGEMENT 3 ABNORMALITY Ea Alarm I O Config 9 Record 3 ACCOUNT E
28. 8 000019 000020 000021 000022 000023 000024 000025 000026 000027 000028 000029 2009 07 29 10 01 00 2009 07 29 10 01 00 2009 07 29 10 01 08 2009 07 29 10 01 08 2009 07 29 10 01 08 2009 07 29 10 01 19 2009 07 29 10 01 54 2009 07 29 10 01 54 2009 07 29 10 02 03 2009 07 29 10 11 14 2009 07 29 10 11 14 2009 07 29 10 12 17 2009 07 29 10 12 25 2009 07 29 10 18 19 2009 07 29 10 18 19 2009 07 29 10 19 22 2009 07 29 10 19 52 2009 07 29 10 21 01 2009 07 29 10 21 37 2009 07 29 10 21 45 2009 07 29 10 22 56 2009 07 29 10 23 06 2009 07 29 13 31 10 2003 07 23 13 31 10 2003 07 23 13 32 13 2003 07 23 13 33 25 2003 07 23 13 33 25 2003 07 23 13 33 44 2003 07 23 13 34 05 Refer to the following sheet for log parameter information Type Search Device Shut Down Time Abnormal Reboot Export Config Config Info Export Config Config Info Export Config Network User Login admin Export Config Config Info Export Config Config Info IP Conflicted Device Shut Down Time Abnormal Reboot IP Conflicted User Login admin Device Shut Down Time Abnormal Reboot IP Conflicted User Login admin Export Config Config Info Export Config Config Info Export Config Config Info Export Config Config Info Export Config Config Info Device Shut Down Time Abnormal Reboot IP Conflicted User Login admin User Logout admin Export Config Network IP ConflictedResumed 2003 07 23 9 57 5 2003 07 23 10 7
29. 8 2 102 so put 102 in this box In Private Port column put in the service port number you put in the DVR network settings For example 4000 In Type column select the TCP radio button In Public Port column put in the same service port number you put in the Private Port box for example 4000 Follow the same process add another entry for HTTP Port on the router Click Apply button and confirm if it prompts to restart the router After the new configuration is activated the web browser clients or other DVR clients tools from public network will be able to access the device 83
30. ActiveX controls isable E C Enable gt Security level for this zone rj Bron and echt habi Administrator approved Custom Disable Custom settings c IS Enable 3 To change the settings click Custom level To use the recommended settings click Default level u D enlac vidan and snimstian on a mahnana thst dace nak ice b H lt I Takes effect after you restart Internet Explorer Default level Reset custom settings Reset to medium high default Reset all zones to default level Security Settings Internet Zone Security Settings Internet Zone Settings Settings Ci Binary and script behaviors O Ad r Initialize and script Activex controls not marked as safe for s A Administrator approve gt Disable recommended Pa secure Display video and animation on a webpage that does not use 4 Rummenvex tefitrols and plug ins Disable Administrator approved Koc Era MW Download signed Activex controls Enable Oo CT A En e Script ActiveX controls marked safe for scripting 2 Pr nded C Disable Promp Downloads ise Automatic prompting For File downloads 2 TniHalise es ERE mania we ata EAM i hicabla BS 4 il Takes effect after you restart Internet Explorer Takes effect after you restart Internet Explorer Reset custom settings Reset custom settings Reset to Medium
31. It can be used alone or used in a network area When it is used lonely it can be connected to the network and used from a network client end 2 2 Features Different user rights for each group one user belongs to one group The user right shall not exceed the group right Support cable network data transmission via Ethernet Storage Function Alarm Function Network Monitor Network Management Peripheral Equipment Support central server backup function in accordance with configuration and setup in alarm or schedule setting Support record via Web and the recorded file are stored in the client end PC Support local SD card hot swap Real time respond to local alarm input and video detection as user pre defined activation setup and exert audio prompt allow user to pre record audio file Realize real time video detect such as motion detect camera masking and video loss Supports one channel audio video data transmit to network terminal Max supports 10 connections Adopt the following audio and video transmission protocol HTTP TCP UDP MULTI CAST RTP RTCP and etc Support web access widely used in WAN Configuration and management via Ethernet Support device management via web Support various network protocols Support peripheral equipment connection via the RS232 port Support serial port RS232 RS485 transparent data transmission Power External power adapter Support DC 12V 2 3 Specificat
32. NCE 3 ADDTIONAL FUNCTION Save Refresh Refer to the following sheet for detail information emm Cow Enable NTP function or not Server IP address Update Interval Time update interval value 43 IP Filter interface Enable IP filter function so that some specified IP user can or not access the device You can not set white list and black list function at the same time Configuration E Control Panel 9f Query System Info 3f VERSION 3f HDD INFO 3f Loc System Config GENERAL ENCODE SCHEDULE RS232 3 NETWORK EI EMAIL E DDNS fa NAS E NTP Sj IP FILTER Da ALARM 3 3 DETECT E PAN TILT ZOOM 3 DEFAULT BACKUP ci ADVANCED HDD MANAGEMENT ABNORMALITY Ea Alarm I O Config E Record 3 ACCOUNT 3 SNAPSHOT Ea AUTO MAINTENANCE 9 ADDTIONAL FUNCTION iv Enable C White List 44 IP Filter Blacklist GO 3B Refresh Delete 7 2 6 Alarm Configuration E Control Panel H E Query System Info a VERSION Ef HDD INFO i E LOG System Config 0 ena GENERAL EMCODE SCHEDULE E R5232 D NETWORK 2 ALARM x DETECT i PAN ITILT ZOOM 0 9 DEFAULT BACKUP 8 ADVANCED 0 53 HDD MANAGEMENT ABNORMALITY 3 Alarm IO Config Record ACCOLINT SMAPSHOT 0 53 AUTO MAINTENANCE H a ADDTIONAL FUNCTION Event Type Alarm In Pernod i Alarm Out Latch iv Record Channel Record Latch iv Send Email PT Activation Capture Local Alarm
33. SNAPSHOT 3 AUTO MAINTENANCE D ADDTIONAL FUNCTION Default Save Refresh f Day Week day Hour Min 2005 T jo vio 2009 8 2 jo vio Cancel C Day Month Week Week day Hour Mir 6 lli Tue o o 8 lhi Wed o o aren 34 Refer to the following sheet for detailed information meme aaa Modify system time Click Save button after your completed modification Select the language from the dropdown list Device needs to reboot to get the modification activated HDD Full Two options stop recording or overwrite the previous files when HDD is full Select recorded file size When you are using one remote control to manage multiple devices you can give a serial numbers to the devices This device does not support this function Video Standard Display video standard such as PAL 7 2 2 Encode Language Device No Configuration ENCODE CHANNEL NAME Channel 01 E Control Panel 9f Query System Info 3f VERSION 9f HDD INFO 9f Loc jT System Config 3 GENERAL 3 ENCODE 3 SCHEDULE aa R5232 D NETWORK Da ALARM Ba DETECT Da PAN TILT ZOOM Channel Channel 01 vl CEE Video Audio v Audio Resolution 1080 vl Frame Rate FPS 125 Bit Rate Type CBR Compression Main Stream Y iv Video Audio Extra Stream Video Audio Resolution Frame Rate FPS Main Stream Bit Rate Type E DEFAULT BACKUP
34. T BACKUP amp ADVANCED 3 HDD MANAGEMENT a ABNORMALITY a Alarm I O Config 3 Record a ACCOUNT a SNAPSHOT Ea AUTO MAINTENANCE ADDTIONAL FUNCTION Save Refresh Refer to the Annex 1 for NO IP DDNS setup information Refer to the following sheet for detailed information Haman OOOO Server Type Select DDNS protocol from the dropdown list and then enable DDNS function The private DDNS protocol means you use your self defined private protocol to realize DDNS function DDNS server IP address DDNS server port Self defined domain name User name you input to log in the server Password you input to log in the server Interval Device sends out alive signal to the server regularly Set interval value between the device and DDNS server here NAS interface This device does not support this function 42 NTP interface Realize network time synchronization Enable current function and input server IP port number time zone and time Configuration P lE MID 9f Query System Info 7 Enable Uf VERSION Ef HDD INFO Server IP dockiscon uf LOG AN jT System Config Port m NM Time Zone GMT 08 00 a ENCODE a SCHEDULE Update Period 7 Minute Ba R5232 9 NETWORK EMAIL DDNS NAS c3 NTP IP FILTER Ea ALARM 73 DETECT 3 PAN TILT ZOOM 3 DEFAULT BACKUP S5 ADVANCED 3 HDD MANAGEMENT 3 ABNORMALITY Ea Alarm I O Config 3 Record Ea ACCOUNT 23 SNAPSHOT Ea AUTO MAINTENA
35. cam 16 Megnyitas Frissites Beszed Helyi 74 Add the IP or domain name of device into Compatibility View Settings list WEB SERVICE Windows Internet Explorer gG gt 2 10 10 5 81 laa BS s wie Favorites WEB SERVICE WE B Service Kereses Ed CAM3 p mS View Settings CAM E cams LA You can add and remove websites to be displayed in E CAM 7 A Compatibility view E33 cams E93 cAM 9 Add this website E CAM 10 C E cam 11 Websites you ve added to Compatibility View E cam 12 10 10 E cam 13 E cam 14 E CAM 15 E93 CAM 16 Megnyitas Frissites Beszed Helyi Include updated website lists From Microsoft Display intranet sites in Compatibility View Display all websites in Compatibility view Add IP address of website of the device into Compatibility View list 6 Ye n 10 10 5 81 wi E IPSs pz EX CAM 1 v a v G8 cam 2 E cam 3 4 EI cAM 4 a v a E cams E cams Sebesseg 5 E cam7 Zoom CAM 8 E cama Fokusz Ga cam 10 M M nee Se CAM 11 E About Internet Explorer 8 cam 12 Szinbeallit Tobb E cam 13 Windows 5 E CAM 14 _ E cam 15 G8 cam 16 2009 03 27 Reset Helyi 2009 Microsoft Corporation System Info idm es Done Internet fg Rio 3 Download ActiveX with IE8 For some PC when update windows and install IE8 it will not install the ActiveX E WEB SERVICE Windows Internet Explorer
36. de Save Refresh Refer to the following sheet for detailed information meme taa The abnormal events include no disk no space disk error net error offline IP conflict Event Type XXXX Space Alarm Set the minimum percentage value here The device can alarm when capacity is not sufficient Check enable this function Normal Out Corresponding alarm output channel when alarm occurs there is one channel System auto activates channel to record once alarm occurs for offline type only Record channel Please note you need to go to chapter 7 3 3 record to set current period as auto record The alarm output can delay for the specified time after alarm stops Latch The value ranges from 10s to 300s Send email System send email to alarm the specified user This function is invalid when network is offline or IP conflict occurs 55 7 4 Additional Function 7 4 1 Configure Set camera property parameter The following interface may vary regarding different devices Configuration Inu Control Panel ae Bf Query System Info Bf VERSION Channel hn ri 3f HDD INFO f LOG jf System Config a GENERAL Exposure Mode ME 1 50 E ENCODE E SCHEDULE BLC Disabled 7 Day Night Mode Auto x Da R5232 73 NETWORK Signal Type De ALARM 73 DETECT Da PAN TILT ZOOM 73 DEFAULT BACKUP Auto Iris amp ADVANCED 3 HDD MANAGEMENT Da ABNORMALITY Brightness Contrast Saturation
37. e IP Video Server 1ch IP Video Server 1ch 4 306 24 25 O00 ACT Net ALM Video RS232 MIC SPK USER MANUAL LI legrand IR Reset LE04770AA Indice 1 AGEBSSOIES AA E General UCR O CUICEIONN cpissistaccassceccccatcdianssnavavecesepdecsatenccsanvatacuaeteasccchvectesssuseceusssaudeccerscuctasnsdacensnesans 5 Esau Mam S 5 JG FOBIUEGS 5 csiiesbivanveeivsiseeereived to questa Pe vi Ve OROTUEEIAEDAEDP ORIS ANE NON EHE Ba aaa KANAAN 5 2 3 Specificato ancor GN GAGANA ANANA NGARANG NGENE LEN A NGANDANG NEBAS ENNEN NENA SERN AAN SS Kasai 6 Framework icsniininitexdve INSANE EEEE LERS 12 LI TP IRINME P 12 2 2 Hear panel ICA NVS aaa Ana GAN AGE VUES ERE CER inaia E DENGAR EN ANAN NANGKE ENENG NUNAS NANG PARV RR REY PE 13 3 3 Hear panel ACW NVS sii es ibeb aan an aha NO DEDEN NGENE NEGEN rroen nan RANEE N a EEEE ernaia 14 Quick Configuration TOON erc M NG BANON 15 ATENE COnN CON nsn adani saa Ga an EEEE 15 Connecting to a Device and Opening the Web Application 0060000000000000000000000000000000000 0000000 23 SIPC TONGGUL AH loli anas viedi Fives RI Rv DK UE VEFERI aa NNI FF EXVER ERE GAN Bae a Wa abaikan 23 5 2Connection with the Search Tool 0000000000000000000000000000000 0000000000000090 000 0000000 00000000000000 00000000
38. e round trip times in milli seconds Minimum 42ms Maximum 53ms Average 44ms C Documents and Settings Wwubing gt Ping the email server to get the ipaddress for example ping smtp 126 com to get ip 220 181 15 112 Input user name and password of the account e g Username user Password pass Input sender must the whole email address of the sender for example user 126 com Set Subject any title according your need Input receiver email address 77 zx O Xe OOY 2 Email Setting 2 Input domain name of the email server such as smtp 126 com if you have already set DNS settings Configuration E Control Panel BF Query System Info 3f VERSION 3f HDD INFO 3f LOG System Config 3 GENERAL 3 ENCODE Ba SCHEDULE 33 R5232 Dy NETWORK amp EMAIL fm DONS fm NAS NTP 3 IP FILTER fa ALARM 73 DETECT EMAIL SMTP Server Port 2 25 0755535 User Name user E Password dock Sender ra Subject Do Receiver 1 Receiver 2 Receiver 3 wi smtp 1 26 com v Enable Da PAN TILT ZOOM 73 DEFAULT BACKUP ADVANCED 3 HDD MANAGEMENT a ABNORMALITY Ea Alarm I O Config 3 Record a ACCOUNT 3 SNAPSHOT 3 AUTO MAINTENANCE ADDTIONAL FUNCTION x O E 309 Save Refresh C heim O O Eg User Name Password Sender Must be your email address Subject Set any subject according your needs DNS Setting Configuratio
39. fast play in the play process bar 60 9 Alarm See chapter 6 3 to see how to access to the configuration menu CONFIG LOGOUT Click alarm function the folowing interface appears Set device alarm type and alarm sound setup Event Type Operation E termal Alarm can not open video A Video Loss v Encoder Alarm Iv Listen Alarm iv Video Pop up M Prompt iv Motion Detect V External Alarm iv Disk Full Iv Disk Error iv Sound Pop up iw Video Mask Sound Path gt gt Alarm Sound Device ID Event Type Alarm Port Channel Refer to the following sheet for detailed information ee Paman Anaa System alarms when video loss occurs Alarm Type Disk error System alarms when disk error occurs Disk full System alarms when disk is full System alarms when camera is deliberately masking Motion Detection System alarms when motion detection alarm occurs Encode alarm System alarms when encode module alarms External alarm Alarm input device sends out alarm Listening alarm Check to activate live alarm notification Check to activate pop up video when alarm occurs Video listening alarm loss to be activated listening alarm has be activated Operation P Automatically pops up alarm dialogue box listening Prompt alarm has be activated Sound pop up System sends out alarm sound when alarm occurs Specify alarm sound file 61 10 About See chapter 6 3 to see how to access to the configuration
40. he file s to PC Click Ok to complete the download procedure Refer to the following sheet for detailed information we em Anaa Search general record alarm record and motion detection record Type Alarm Search alarm record Motion i Search motion detection record Detection Gah Click this button you can view the recorded file matched your Operation requirements Playback Select the file first and then click playback button to view the video 59 C e RENE RN Download by file Select the file s and then click download button Download by time Download the recorded file s during specified period Download type Select the file needed multiple choices and click download button system pops up a dialogue box Input the downloaded file name specify the path and then click OK button System begins download and the download button becomes stop button There is a progress bar Download Open local Select local record to play Note Go to chapter 7 2 2 Encode to enable watermark function first Click watermark button system pops up a dialogue box Default watermark character is Digital CCTV Click local file you can select the recorded file Then click verify button to check file is original or not Watermark Multiple channel System supports playback one file in several monitor channels playback During the playback process there are control buttons such as play pause stop slow play and
41. if it is in another segment cameras DVR NVR encoders and decoders and to modify it The configuration tool is available on the CD supplied with the product It also allows the software to be upgraded or certain parameters to be modified This tool is used to connect to devices with an IP address in the same segment only 4 1 First Connection 4 1 1 Connection with the configuration tool to change the IP address or upgrade a device s internal software To open the software double click the ConfigTool exe icon on the CD supplied with the product To search for devices connected to the network Click the Refresh button the tool will search for devices connected to the network and display it in the form of a list D 9 ConfigTool Device List SN IP Address Pert Subnet Mask Default Gat Mac Address 1 10 7 6 4T Stitt 255 255 0 0 1D T 0 1 52 54 4c 90 5d 2 10 T 8 21 SITT 255 255 0 0 ID T D 1 52 54 4c d 58 e4 3 10 T 10 104 OU E 1 P IRL 4 10 7 2 2 Siti 295 295 0 0 10 7 0 3 00 05 23 16 24 46 5 IB T 1 113 Sift 255 295 0 0 ID T D 1 52 54 4c a 35 3T 6 10 T 10 91 Siti 295 295 0 0 10 T D 3 00 12 26 45 23 65 i 192 168 0 108 2995 200 0 0 192 168 0 1 00 1a 6b 90 5T db 8 ID T 2 B1 SiT 295 295 0 0 I0 T 0 1 00 08 30 ad 00 12 Tip You can click login button directly and then input corresponding information to login
42. in a ia daana MM Nana b baa ka nia QU aaa a aa aja kai 56 H Search keeecesdccccociccscnccacigesccccdcccacsesacsuccesqucccusccecueiessenasceigoseccevooceelesseciccwseuvesnidncebolevecuceswsuc 59 2 Alrm n n M 61 10 ADout Sestibi titii ia Or HAE PERITI BD HANG BA NIMM I INIHI ITINERE 62 11 Logout M M 63 Annex 1 NO IP DDNS m 64 Annex 2 USING Google CHONG 5 icsisicisseccaccacceseaciacssceccssssccdasicccvencooescansondaeseccssevcsseveenscsesessseasuavaseseves 70 Annex 3 Using FING OX aaa aka ka na DN gadha DANANG GAGANA KAU NENGENA GEN Haaa A a A RAD AAN AN ON a AA NG IA KANE BAN 72 AnnexA Using VES sasasi aa aga aaa a ANENG KAN TANG GN NG A aaa BA NA Ga AKK aa ga AK aaa BA Ka na A AGE a aaa ek Nak aii 74 Annex 5 Email FUNCIO scorsa aeran EAEN 77 Annex 6 Routers COMMUTATION asas kani gana aa NEG NEK ANAN GN GEBANG THENG ANGGA NENGENA BANDA aa KENA EN Ga akan NG DN aaa 80 1 Accessories 12V power adapter Multiple function connector cable 1 data to DB9 male com cable Quick Start Guide 2 General Introduction 2 1 Overview This device adopts audio video data collection transmission and storage It can connect to the network directly without any auxiliary device This device uses standard H 264 video compression technology which maximally guarantees the video quality
43. ings lt wi Activex controls and plug i P Allow previously unused ActiveX controls to run without pror Disable k a Allow Scriptiets Prompt 4 Automatic prompting For ActiveX controls Disable m2 Enable 2 m Binary and script behaviors Administrator approved Disable Internet fs This zone is For Internet websites except those listed in trusted and restricted zones sites Security level for this zone Custom Custom settings To change the settings click Custom level To use the recommended settings click Default level IW Diienlau viden snd snimstian en 3 mahnana khak dace nak icc ba lt Lill gt Takes effect after you restart Internet Explorer Reset custom settings Default level Reset to medium high default v Reset all zones to default level Security Settings Internet Zone Settings Settings C Binary and script behaviors O Administrator approved Disable CG Enable gt Initialize and script ActiveX controls not marked as safe for si Disable recommended Enable not secure Display video and animation on a webpage that does not use a Ronaevertontrols and plug ins Disable S Administrator approved Download signed ActiveX controls 4 Enable Q Dis 3 Enable not secure Prompt recommended a Download unsigned 7 Enable not secure a Downloads Promp pe ot Automatic
44. ions 2 3 1 Function specification Ref 4 306 24 Ref 4 306 25 Parameter 1 ch analog video input BNC port 4 ch analog video input BNC port v eleo eet Level 1 0Vp p Resistance 750 Level 1 0Vp p Resistance 750 1 channel analog video output BNC port Level 1 0Vp p Resistance 750 Support composite video output with OSD output 1 ch audio input BNC port Level 4 ch audio input BNC port Level 1 0Vp p Resistance 750 1 0Vp p Resistance 750 1 channel bidirectional talk output 3 5mm JACK LINE OUT Encode Capability H 264 encode D1 704 576 HD1 352 576 CIF 352 288 QCIF 176 144 Video output Audio video Audio input Encode Bit Stream Performances D1 1f s 25f s for each channel D1 1f s 25f s for each channel Adjustable Adjustable CIF 1f s 25f s for each channel Adjustable Network Capacity Max support 10 network users to monitor simultaneously DC 12V Video Recording Speed 10 C 50 C Working Environment Humidity 10 90 Dimension H W D 137 mm 162 mm 30 mm JR OMNEM t Standard H 264 encode decode format Video Take 18 22 pix as a macro unit Motion Detection Support 396 detection zones Sensitivity level ranges from 1 to 6 Specifications Support max 6 periods ie Calisto This series product does not support this function After enabling manual record no matter system is in Manual Record schedule or alarm status or not s
45. l server Host IP URL Action e Hosts By Domain 9 2417 Server Monitoring no ip biz Wand Failover Click here for more info vd16s480st no ip biz 200 200 200 198 Z Modify 3 Remove Add a Host 10 Now you need to define the definition of the server s IP in IP device able to access this service DDNS To get DDNS service you need to have a computer connected to the Internet on the same network with device Type the command ping dynupdate no ip com at the command prompt Windows 9 The server s IP will be displayed on the screen Your device can use this IP to find the No IP server 67 11 12 G N ping dynupdate no ip com Disparando dynupdate no ip com 264 16 252 79 com 32 bytes de dados de 264 16 252 79 bytes 32 tempo 309ms TTL 235 de 264 16 252 79 hytes 32 tempo 3i18ms TTL 235 de 264 16 252 79 hytes 32 tempo 3B84dms TTL 235 Resposta de 264 16 252 79 bytes 32 tempo 329ms TTL 235 statisticas do Ping para 2804 16 252 79 Pacotes Enviados 4 Recebidos 4 Perdidos Hx de perda Aproximar um n mero redondo de vezes em milissegundos Minimo 3 4ms Maximo 329ms M dia 315ms PERS Please go to the device and access the MAIN MENU SETTING NETWORK DDNS Input server IP you get in the above step Select the DDNS Type as No IP DDNS and highlight the icon x in front of Enable to enable the DDNS function Now fill the fields as described below and click OK to save current
46. l the latest IE Tab extension version 1 0 11208 1 or above gt Q fi y https chrome google com extensions detail hehijbfgiek mjfkfjpbkbam mjbdenadd Goegle chrome extensions Search for extensions Extensions gt IE Tab e IE Tab by ietab blackfishsoftware com tee wee 456 52 873 users Weekly installs 40 812 Display web pages using IE in a tab Install Use Internet Explorer to display web pages in a Chrome tab Some sites can only be displayed using IE and with this extension you can now see those sites without leaving Chrome Great for web developers who want to test the IE rendering engine users who use sites with ActiveX controls and users who want to use the explorer view for local files i e file URLs WINDOWS ONLY Version 1 0 11208 1 Wednesday December 09 2009 Developer website 3 Support and FAQs A Report abuse After installation you will get an IE icon on top right of your Google Chrome interface ES 2 Visit Web Interface Get an IE address bar by clicking the icon showed previously Enter the IP address of your device 1E WEB SERVICE W E p Service 0 User Name MEMBER Password MEN RR 71 Annex 3 Using Firefox 1 Dowload and install extension Click Tools and Add ons Search and install IE Tab ie_tab_plus 1 95 20100930 fx sm Software Installation Install add ons only from authors whom you trust Malicious sof
47. mplete control over your domain LJ B FREE dynamic DNS update client amp Includes 50 hosts sub domains Login Buy Now 2 Left click mouse on the Create Account button account Information interface 1 noip Home Download Services Support Company No IP is Free Sign up Now Home Free SignUp Create Your No IP Account If you already have an account then you can sion in here Account Information Email Password Confirm Password i About You First Name Last Name How did you hear about us Select One Zip Postal Code 3 Fill in the requested fields and click Accept button Then you can get an email containing username and password You can use this account to access the service 4 Open the e mail sent by trusted rmac o No IP and double click the link that is below the phrase To activate your account please click the following URL in the body of the email Assunto No IP com Activation Congratulations the No IP account henrique intelbras com br has been created To activate your account please click on the activation URL below No IP s basic dynamic DNS service is free made possible by our paid services If you are interested in dynamic DNS for your own domain please consider our No IP Plus service For more information about our paid services visit http www no ip com services To activate your account please click the following URL http
48. n E Control Panel Bf Query System Info NETWORK x a ABNORMALITY Ea Alarm I O Config a Record a ACCOUNT E SNAPSHOT Get the DNS address from your network administrator BBP VERSION Ethernet Port Port 01 l DHCP B HDD INFO IP Address 10 142 amp 28 Mac Address 00 11 22 33 45 55 i Subnet Mask 255 255 0 0 qesem quee DEO gj ENCODE aa SCHEDULE Device Name 00 11 22 44 55 Ba R5232 TCP Port 37777 HTTP Port 80 m crear UDP Port 37778 MaxConnection 4 E DONS Preferred DNS NAS NTP Alternate DNS m c a Transfer LR d Ba DETECT Gm oerstap tee MANCASI 0 m amp ADVANCED User Name IP Address 238 255 42 42 HDD MANAGEMENT a Password fart 36666 1765535 Ea AUTO MAINTENANCE 0E ADDTIOMAL FUNCTION Default Save Refresh 78 Get DNS setting from your PC in the same network by command ipconfig all c E FIRDOWS syst em32 cad exe C Documents and Settings wubing gt ipconfig all Windows IP Configuration Host Name Primary Dns Suffix Node Type IP Routing Enabled WINS Proxy Enabled Ethernet adapter WILE C Documen Lh Hn EA 13 3 Send Email Setting Enable send email function of Detect or Alarm settings so when there are alarms the device will send Email Connection specific DNS Description Subnet Mask Default Gateway DNS Servers are x Muse rry Pe S Control Panel amp ADVANCED 3 Record
49. n the right hand side of the interface ConfigTool Hetfork Parameter PPPOE Vser Name System Information Password System Upgrade IP Address Save 3 Return C mede Ne O Click the System Information tab on the right 19 4 1 4 System Select System Information on the right hand side of the interface ConfigTool Device Information NetWork Parameter SH PA1426609044340012 PPPOE Software Version PEER EEnE Renner eee Systen Information TRECE NE PA142660 340012 Eee Date and Time 2009 T 9 I PC Time 15 13 36 Manual Setup Date Time Save S Return C PEN Sen ena PA a TSN Devceseralnumber OOOO Synchronization Synchronisation of the device date and time with the date and time on the PC with PC Click Sync to synchronise then Save to save the date and time Manual setup of the device date and time Manual Setup Enter the desired date and time Click Sync to synchronise then Save to save the date and time sw sme TT L menm etum oine searen merae By way of example enter a camera name in the Device Name field Check that Synchronization with PC is selected so that the date and time are synchronised with the PC Check that the date and time are correct If not click Sync S 20 4 1 5 System Upgrade Select System Upgrade on the right hand side of the interface Configlool Upgrade Information NetWork Paramete
50. nction Note you need to go to chapter 7 2 3 Schedule to set motion detection record period and go to chapter 7 3 3 Record to set current period as auto record Record Latch System can delay the record for specified time after alarm ended The value ranges from 10 seconds to 300 seconds Send email when alarm occurs and ends PTZ activation Set PTZ movement when alarm occurs Such as go to preset x when there is an alarm Capture Input capture channel number so that system can backup motion detection snapshot file Save Click save button after complete setup for one channel or complete the whole MM EM and click save button Refresh 0 Click this button to get device latest Click this button to get device latest configuration information information 48 7 2 8 Default amp Backup Default Restore factory default setup Select corresponding items Backup Export current configuration to local PC or import configuration from current PC System can t restore some information such as network IP address Configuration E Control Panel ee pEFAULT BACKUP Bf Query System Info Please select setting entries that you want to default E9f VERSION ae a Select all Default d System Config E GENERAL GENERAL ENCODE 3j ENCODE Ea SCHEDULE iw SCHEDULE RS232 lag R5232 V NETWORK ALARM aj NETWORK 3 ALARM DETECT iy DETECT a PAN TILT ZOOM 3 DEFAULT BACKUP amp ADVANCED MAINTAIN
51. nel 01 5 seconds 0 00 00 23 59 59 Period 1 Enable motion detection alarm U m L B U NJ EE NA TI lt Pre record Start time Schedule setup Time Setup End time Record Function configuration type Schedule setup Network setup Alarm setup Default setup Period 1 Enable motion detection alarm ness Snapshot ime Setu j Week Sunday COM0 Console 192 168 1 108 192 1680 Device factory default name 37777 Multiple broadcast group 239 255 42 42 Disable Disable Disable Local input input 01 disable Period Start time 0 00 00 Setup End time 23 59 59 Period 1 enable Week Sunday Disable e PTZ activation Event type never Address 0 Function configuration type Period Start time 0 00 00 Time period setup End time 23 59 59 Period 1 enable Week Sunday Event type Never Address 0 Disable Channel Channel 01 Protocol DH SD1 Video detection PTZ activation Snapshot Address PTZ Setup Baud rate 9600 Data bit Bo Default and Backup Alarm Output Alarm Latch admin admin reusable 888888 888888 reusable Abnormity Advanced User account 666666 666666 reusable default Channel Channel 01 Snapshot Function configuration type Advanced Default setup Auto maintain Auto delete Never old files 1 11 3 Framework 3 1 Front panel E FERA ge oue EE dit DSL A A
52. nkPace ml Input your IP address here Internet 100 7 Note If the connection fails either the camera does not have an IP address in the same segment as the PC see chapter 4 1 1 to change it or the Internet Explorer security parameters are not set correctly see chapter 5 1 to change them 5 4 Login Enter your user name and password Default factory name is admin and password is admin The login type includes TCP UDP Multicast depending on the device PLIUESISEET krow ntermet T3309 fe Cd o Ve otes Took heb O O 586 Pw e062 3 B8 WER Service Local rtr anet 25 After you log in the main window appears Open All Retesh StarDialog Local Play fe id at sa OE ES UG Note Use IE compatibility mode if you are using IE8 or above See the detailed user guide for the Web interface 26 Opeedt 5 Zoom Focus 6 Main Interface Introduction e 6 1 Log in WEBservice Windows Internet Explorer Ce E htei10 10 3 16 Sis x ex Ins od f weBservice 2 D dh v i Page Tools Done La Internet amp 1005 r Input user name and password default is admin admin After you logged in IP Camera web main interface appears 2 WER sss SEARCH CONFIG LOGOUT Open All Refresh O 4 StartDialog v 0 o0 3 Local Play Speed 1 8 5 Zoom 6 BO Re OS ED IKA ki EH E
53. omain name Upgrade to Enhanced Use your own domain name with our DNS system Add your domain name now or read more for pricing and features T Wisin j for your mail server Click here for more info Hostname no ip Diz Y 9 Host Type 9 DNS Host A DNS Host Round Robin DNS Alias CNAME IT WA 24 7 Server Monitoring and Failover 5 Port 80 Redirect Web Redirect IP Address 2 Need Help Assign to Group No Group 7 Support Center Enable Wildcard Wildcards are a Plus Enhanced feature Upgrade Now c Basic Troubleshooting Guide Support Ticket Accept Mail for your Domain Contact Us LetNo IP do the dirty work Setup POP or forwarding for your name Mail Options MK Record MX Priority Erter the name of your external mail exchangers mx records as hostnames not IP addresses X e If you would like a more MX records please upgrade to No IP Plus or Enhanced 9 Now you can see an interface Here you can view domain name and the computer s current IP setup If you already have a domain name equal to gurado trusted you must define another name for the host 6 noip Hosts Redirects Plus Managed DNS Domain Registration SSL Certificates Mail Monitoring Squared Backup DNS Renew Activate anage Hosts Add Host a g Manage Hosts equ sis Host vd16s480st no ip biz created Download Client Upgrade to Enhanced Current Hosts 1 of5 Need More Hosts Enhance Your Account 1 3 Need redundancy _ YA for your mai
54. on Check to enable email function System can send email when alarm occurs and ends can send email when alarm occurs and ends This function is not available in current device PTZ activation The system can go to a preset when alarme occurs only for IP speed dome Capture Input capture channel number so that system can backusnapshot file to the SD card or send to the specified email box when alarm occurs Copy It is a shortcut menu button You can copy current channel setup to one or more all channels Save You can click save button after you complete setup for one channel or you can complete the whole nta ME M EE MN E and then click save button Refresh Click this button to get device latest Click this button to get device latest configuration information information 46 7 2 7 Detect Configuration Control Panel BF Query System Info 9f VERSION 9 f HDD INFO M LOG F System Config 93 GENERAL x ENCODE x SCHEDULE Bg R5232 xj NETWORK i ALARM DETECT 3 PAN TILT ZOOM Dy DEFAULT BACKUP ADVANCED 9 HDD MANAGEMENT x ABNORMALITY 3 Alarm I O Config 3 Record 3 ACCOUNT SNAPSHOT 3 AUTO MAINTENANCE 9 ADDTIONAL FUNCTION Event Type Motion Detect Y DETECT Channel Region Channel 01 v i Select Sensitivity B Period iw Alarm Out Latch iv Record Channel Record Latch iv Send Email iv PTZ Ac
55. on interfaces to modify system setup Parameter Configuration NVS provides running information such as user port log status user management email setup date modification System can record the important event log record Record the following information Log System operation setup operation alarm event record management user management clear log 7 To avoid vicious video modification Power supply RESET DC12V power supply Support hardware reset System needs to reboot to activate the default setup 2 3 3 Factory Default Setup Please refer to the following sheet for factory default setup information Function configuration type Default setup Date format Y M D S Disable by default Date separator Time format 24 General Setup Language English When HDD is full Overwrite Record duration 60 min Device No Video type Channel Channel 01 Compression ee f Enable audio and video General bit stream Main stream Resolution Frame rate Bit stream control CBR Bit stream value 2048 frame interval control 50 Extension stream Main stream Audio Video enable Enable video Resolution Frame rate Encode Setup Bit stream control BR Quality High Bit stream value frame interval control 50 Brightness 50 Image color one 2 Saturation 50 Hue 50 Enable Watermark Seu pal Character Digital CCTV Privacy Mask Never Time title Enable OSD transparent 128 Channel title Enable OSD transparent 128 Channel Chan
56. one Please set Default setup is none Please set according to the speed dome dial switch setup to the speed dome dial switch setup Save You can click save button after you complete setup for one channel or you can complete the whole cM RM and then click save button Refresh Click this button to get device latest Click this button to get device latest configuration information information 30 6 7 Color and More Setup Color setup Color iore Reset Refer to the following sheet for detailed information Parameter All the operations here apply to web display only Go to chapter 7 2 2 System configuration gt Encode setup gt color setting to adjust corresponding system items More Setup Color hore FIC Path REC Path Reboot Refer to the following sheet for detailed information NAGA MN More System pops up an interface to modify path Path Record System pops up an interface to modify path Path System pops up a dialogue box click OK button to reboot device 31 7 Configure See chapter 6 3 to see how to access to the configuration menu SEARCH CONFIG LOGOUT 7 1 System Information 7 1 1 Version Information View device hardware feature and software version information Configuration Control Panel VERSION H B Query System Info S N 00 11 22 33 45 55 f HDD INFO Video In Out 171 Ef Loc Audio In Out 121 4 System Config Alarm In Out 171 GENERAL Ethe
57. ones to default level Security Settings Internet Zone cal Security Settings Internet Zone Settings Settings WA Binary and script behaviors e 9 Initialize and script Activex controls not marked as safe for si Administrator approved Disable recommended Disable Enable not secure CC Enable gt Oren gt i Display video and animation on a webpage that does not use a Rurmenvex toritrols and plug ins Disable Administrator approved lw Do Toad signed Activex controls Enable Disable rr Q Enable not secure J Script Activex controls marked safe For scripting 9 Prompt recommended C Disable C Download ActiveX controls Enable Disable recommended Cy Prompt Enable not secure E Downloads Prompt re i Automatic prompting For file downloads A Tniialize SPA Foe controle nak marbad se cafe For e A Nirala amp gt lt mangn ie J Takes effect after you restart Internet Explorer Takes effect after you restart Internet Explorer Reset custom settings Reset custom settings Reset to Medium high default vi Reset to Medium high deFault x 73 Annex 4 Using IE8 1 Run Web interface with IE8 With IE8 sometimes it will not run with the normal mode there 2 ways to solve this 7 WEB SERVICE Windows Internet Explorer Ge y htto 10 10 5 81 x Allt Hn E jt w ni si Favorites WEB
58. only 1 window and full screen display mode ED WEH Video quality adjustment button Displays the original image size in the webpage 6 5 Preview Window Switch The device do not support this function 6 6 PTZ Control PTZ interface is shown below Before operations make sure you have set the speed dome address The DVR and the speed dome connection are OK Configuration E Control Panel PAN TILT ZOUM Bf Query System Info Channel 01 BP VERSION Channel anne ja d Protocol PELCOD jf System Config Address f 07255 GENERAL ENCODE Baudrate 115200 SCHEDULE RS232 Data Bits a NETWORK ALARM DETECT 3 PAN TILT ZOOM DEFAULT BACKUP amp ADVANCED HDD MANAGEMENT ABNORMITY Alarm I O Config Record ACCOUNT SNAPSHOT AUTO MAINTENANCE ADDTIONAL FUNCTION Stop Bits Parity Save Refresh Parameter Function You can select monitor channel from the dropdown list Select the corresponding dome protocol such as PELCOD Address Set corresponding dome address Default value is 1 Please Note your setup here shall comply with your dome address otherwise you can not con trol the soeed dome Select the dome baud rate Default setup is 9600 Default setup is 8 Please set according to the speed dome dial switch setup Default setup is 1 Please set SP TUR Rp anrea e ENS FUR TIUS S o to the speed dome dial switch setup Parity Default setup is n
59. ort Port 192 168 0 108 37777 37777 Enable Davei he OR T lt a 192 168 0 108 80 37777 60 191 94 100 80 37777 192 168 0 109 37779 37779 Enable d s 81 37779 60139194100 81 37779 192 168 0 109 81 81 Enable To access Device 1 input the IP address http 60 191 94 100 To access Device 2 input the IP address http 60 191 94 100 81 1 D LINK Router interface may very depending of the device Log on to the router Select Advanced tab on the top and click on Virtual Server button on the left The following page will be displayed The screen might be very different regarding to the different model of routers Tools Status Help NN fitual Sei Virtual Server is used to allow Internet users access to LAN services 9 Enabled Disabled myDYR s remote service add Private IP pamu Protocol Type TCP v Private Port 4000 Public Port 4000 time 00 00 w AM vto NC ON Orem HE HAM EE DMZ ree eae UN day Sun w to Sun iv oo00 ua i Apply Cancel Help Name Private IP Protocol Schedule Name Gear oe 80 es C WINDO S syst em32 c Microsoft Windows XP hkAS 5 1 26001 C hRAVPIU 1985 2001 Microsoft Corp C Documents and Settings wubing gt ping smtp 126 com Pinging smtp 126 split netease com 226 181 15 112 with 32 bytes of data 226 181 15 112 bytes 32 time 53ms TTL 52 2280 181 15 112 bytes 32 time 42ms TTL 52 2280 181 15 112 bytes 32 time 42ms
60. ost service provider and enable PPPoE function Save current setup and reboot PPPOE the device to get the setup activated Device connects to the internet via PPPoE after reboot Get the IP address in the WAN from the IP address column 40 Email Interface Contiguration E Control Panel EMAIL Bf Query System Info SMTP Server www Yahoo com M Enable 3f VERSION B HDD INFO Port 25 0765535 3f LOG User Name anonymity jf System Config Pise 3 GENERAL a ENCODE Sender anonymity yahod com 3 SCHEDULE Subject DVR Message Bm R5232 aj NETWORK amp EMAIL Receiver 2 3 DDNS NAS a NTP IP FILTER a ALARM fa DETECT Ea PAN TILT ZOOM 3 DEFALILT BACKUP amp ADVANCED a HDD MANAGEMENT a ABNORMALITY a Alarm I O Config 3 Record a ACCOUNT a SNAPSHOT Ea AUTO MAINTENANCE 9 ADDTIONAL FUNCTION Save Refresh Receiver 1 Receiver 3 Please refer to the following sheet for detailed information Haman non 41 DDNS interface Configuration E Control Panel DDNS 9f Query System Info DDNS Type NOJPDDNS _v M Enable 3f VERSION ine ne Server IP www yahoo com jf System Config Port 5050 1765535 3 GENERAL ba ENCODE Domain Name www yahoo com SCHEDULE User Name anonymity Ba R5232 fa NETWORK Password I EMAIL ae Alive Interval sec 30 1730000 3 NAS NTP IP FILTER a ALARM Ba DETECT Da PAN TILT ZOOM 3 DEFAUL
61. owing sheet for monitor window parameter information SN Parameter Funtin O O 1 4 Display 1 Device IP address device 2 Channel number information 3 Bit stream 4 Stream decode type 1 Overlay 52 Off stream S3 GD1 H1 Overlay H2 off stream decoding from the display card 5 Digital Click this button and then left drag the mouse in the zone to zoom in zoom Right click mouse system restores original status Change Resize or switch to full screen mode show mode 7 Local Click this button to begin local recording record The recorded file is saved by default to folder C RecordDownload Capture Click this button to snapshot picture Images are memorized in folder C Picture download default o wo Tmonoofado OOS S 10 Close video in current window 1 1 Channel Current view channel number number 6 2 2 Playback Click local play to open recorder The playback bar is shown below 066 1 Playback process control 2 Play 3 Pause 4 Stop 5 Slow play 6 Fast play Once you selected window is in real time monitor mode system automatically switches to playback the video by default 6 3 System Menu SEARCH CONFIG LOGOUT For detailed information refer to Chapter 7 Configuration Chapter 8 Search Chapter 9 Alarm Chapter 10 About Chapter 11 Log out 29 6 4 Monitor Window Switch Bu 7 D The device support
62. r PPPOE Upgrade File Open Q System Information System Upgrade Current Progress Return C Upgrade file Open Click here to select the upgrade file Current progress Upgrade Click here to start the upgrade procedure meum Reuntosemchitefae O oOo Steps for updating the device s internal software Click on the Open button and select the bin internal software file When the file has been added click the Upgrade button the file is then transmitted to the device Configlool Upgrade Information NetWork Parameter PPPOE Denk tF Chn P V1 000 0000 0 R 20090612 bin Open 0 System Information System Upgrade Current Progress ggg System is transmitting file now Please walt 21 Once the file has been transferred the device upgrades automatically Configlool F_Chn_P_ 1 000 0000 0 R 20090612 bin Open BEBEHBEBEEEHEEHBHHEH Uperade UJ 4 4 Law Y AP T S ele NR Ne WE VUperede succeeded System is going to we Img vw Click OK to finish the procedure 22 5 Connecting to a Device and Opening the Web Application 5 1 PC Configuration This device supports Web access and management via PC Web includes several modules including monitor channel list record search alarm setup system configuration PTZ control monitor window etc The system pops up warning information to ask whether you wish to install the control webrec cab or not Click OK
63. r modem or router to your device Click DDNS to go to the configuration interface You can see an interface Configuration E Control Panel a DDNS if Query System Info DDNS Type ND4PDDNS _v M Enable 3f VERSION 9f HDD INFO www yahoo com 3f LoG j System Config Port 5050 1765535 3 GENERAL Cs ENCODE Domain Name uw yahoo com 3 SCHEDULE User Name anonymity E R5232 Ea NETWORK Password p y EMAIL aE Alive Interval sec 30 1730000 NAS NTP IP FILTER 3 ALARM Ba DETECT 73 PAN TILT ZOOM 3 DEFAULT BACKUP amp ADVANCED a HDD MANAGEMENT a ABNORMALITY 73 Alarm I O Config Record a ACCOUNT a SNAPSHOT Ea AUTO MAINTENANCE ADDTIOMAL FUNCTION Save Refresh e DDNS Type You can select from the dropdown list There are four options No IP DynDNS CN99 Private Port input server port here e Domain Name Get the domain name you get from your DDNS service provider User Get the user name you get from your DDNS service provider e Password Enter corresponding password Highlight the icon ig in front of Enable to enable the DDNS server configuration 64 To receive domain name in the No IP DDNS service please follow the steps listed below 1 Please visit www no ip com the page of No IP appears as below p amp 5no1p Home Download Services Support Company User Login No IP Plus the complete managed DNS solution D Easy to use interface Co
64. rnet Port 1 I E ms e Bios Version 1 200 0000 0 R Build 2011 1 17 NETWORK ALARM DETECT Ea PAN TILT ZOOM DEFAULT BACKUP Si ADVANCED HDD MANAGEMENT ABNORMALITY Ea Alarm I O Config Record a ACCOUNT SNAPSHOT Ea AUTO MAINTENANCE 53 ADDTIONAL FUNCTION Refresh 7 1 2 HDD information View local storage status and network status including free capacity and total capacity Configuration Control Panel St HDD INFO m M ery Sytem Iio SN HDD Status Free Total Space Bf VERSION 2f Total 0 960MB Bf LoG Local HDD 1 Disk 1 Working 0 960NB f System Config GENERAL E ENCODE Bd SCHEDULE aa R5232 NETWORK a ALARM 3 3 DETECT 73 PAN TILT ZOOM C DEFAULT BACKUP ADVANCED 3 HDD MANAGEMENT E ABNORMITY Ea Alarm I O Config 3 Record E ACCOUNT 3 SNAPSHOT Ea AUTO MAINTENANCE ADDTIOMAL FUNCTION 32 7 1 3 Log View system log Configuration Control Panel Bf Query System Info Bf VERSION f HDD INFO 3f Loc 7 System Config GENERAL og ENCODE E SCHEDULE Ba RS232 NETWORK Ea ALARM 33 DETECT Ea PAN TILT ZOOM E DEFAULT BACKUP ci S ADVANCED E HDD MANAGEMENT Ea ABNORMITY Ea Alarm I O Config 3 Record Ea ACCOUNT E SNAPSHOT Ea AUTO MAINTENANCE ADDTIONAL FUNCTION Clear Backup LOG Event 000001 000002 000003 000004 000005 000006 oo0007 000008 000003 000010 000011 000012 000013 000014 000015 000016 000017 00001
65. s 192 168 0 102 so type in 102 in this box Check the Enable box to enable port forwarding Follow the same process add another entry open the HTTP Port on the router for this device Click the Save Setting button the router might need to restart After the these settings have been activated the web browser client device Net View client or other client tools will be able to access the device from public network 82 3 SMC Router Log on to the router select Advanced Setup tab on the top and click NAT button on the left panel Select Virtual Server in the expanded list structure you will see the following screen Notice that it might look very different according to different models of routers Virtual Server You can conigues the Earrcada as a vitual sorar so that remote users accessing sesicas such as the Wab or FTP st your local site via publ c IP addresses cart be automaticaly redirected to boc el servers configures with private P addresses In ether words depending on the recuested sence TCPYLOP port number Ihe Bamca de redrects the external senice request to the aporapnale server ecaled af snclheriniemal P address Ld Private Port ype Public Port L awa emcur 2 wi mE ewpcyp wo j Scum 14 maal j eme 5 ama recor In Private IP column put in the last decimal digit of your DVR s IP address For example your device s IP address is 192 16
66. s connected to the network and display them in the form of a list see chapter 4 1 1 for details of the interface To connect to a device Highlight it single click in the list Click on button or double click on the highlighted line The following window opens IP Address 10 10 3 16 User Name admin Password oo Port 37777 Cee C ranon e Click Login once the information has been entered If the following screen appears this means that the device address is not in the same IP addresses segment as the PC on which the configuration tool is currently running It will therefore not be possible to connect IP Address Modification X 10 7 16 37 Note Current device IP 255 255 0 0 and PC IP may not in the Subnet Mask same network segment 10 7 8 1 Please reset and then try IP Address Default Gateway again Manually modify the IP address by entering the desired new address Click OK to save the new address in the device 17 Restart the procedure The following window should open IP Address 10 10 3 16 User Name Password oo Port Click Login to access the parameter modifications ConfigTool Ne fork Par water General Parameter DHCP Enable PPPOE IP Address 10 10 3 16 Ennio Subnet flask 255 255 0 0 Systen Upgrade Gateway 10 10 0 1 Mac Address 52 54 4c fa 43 6d 18 4 1 3 PPPoE Select PPPoE o
67. sfully logged inte No lP s member section To san using Ha IFP amp services select an ian below or chonse an item from the navigation above nn um um d guppi Cerje Basic Troubleshooting Mange omais Ack Domain Fister Friend Pall a Hirsi Manage Hosts sii 7 The Manage Hosts interface is shown belok Click the Add Host button you can access the creation of a domain name Bnoip Hons Redirects Phm Managed DINE Duran Reginiralsun BEL wi Eur Mail Kirab kii Dienie Elzec leui DIN E Batir dilea D nostsiRedirects d Manage Hosts d t3 Manage Hosts 1 Manage Groups Current Hosts 0 o 5 Need More Hosts Enhance tour Account Download Cheni Upgrade How Upurade to Enhanced Host URL Action Hosts By Domain T Bond redundancy a J for your mall server No Hosts m hure lor more Ei 66 8 Input corresponding host name in the filed You can use this name to access device from an external network In the field to the right of the name select the desired area This is your domain name for access to the device Click Create Host button at the bottom of the page Hosts Redirects Pius Managed DNS Domain Registration SSL Certificates UE ETT Monitoring Squared Backup DNS Renew Activate B aAdd a host Add Host Manage Hosts Fill out the following fields to configure your host Afer you are done click Create Host to add your host Manage Groups Download Client Own a d
68. t channel record no matter what period applied in the record schedule setup 52 7 3 4 Account Add remove user or modify password Configuration E Control Panel Bf Query System Info 9f VERSION uf HDD INFO 3f LOG F System Config 9 GENERAL a ENCODE Bn SCHEDULE aay R5232 NETWORK Ea ALARM m DETECT PAN TILT ZOOM DEFAULT BACKUP ADVANCED 9 HDD MANAGEMENT 3 ABNORMITY 3 Alarm I O Config 3 Record ACCOUNT SNAPSHOT Ea AUTO MAINTENANCE ADDTIONAL FUNCTION Note Reusable means that the account can be use for different login at the same time 7 3 5 Auto Maintenance ACCOUNT Account admin admin Reuseable 888888 Reuseable 1 Reuseable E user 666666 Reuseable default Select auto reboot and auto delete old files interval Configuration Control Panel Bf Query System Info 3f VERSION a HDD INFO Bf LOG 7 System Config DI GENERAL Da ENCODE SCHEDULE Ba R5232 NETWORK 5 ALARM 8g DETECT PAN TILT ZOOM a DEFAULT BACKUP ci S ADVANCED a HDD MANAGEMENT a ABNORMITY 3 Alarm I O Config 3j Record ACCOLINT SNAPSHOT Emu ALTO MAINTENANCE g ADDTIONAL FUNCTION Auto Reboot System Everyday Y Auto Delete Old Files Modify User Delete User Modify Password Add Group Madify Group Refresh AUTO MAINTENANCE 02 00 v NEVER 53
69. t current disk as read Hot swap This function allows to hot swap the disk when the device is working This function will not result in disk malfunction Click this button to save disk current status 50 7 3 2 Alarm I O Configuration Control Panel Alarm IYO Config Y Ef B edo infa 1 Alarm Out E HDD INFO LOG yp System Config ZEE GENERAL EMCODE SCHEDLILE R5232 Trigger H E NETWORK ALARM 3 DETECT oa PANJTILT ZOOM E DEFAULT BACKUP 8 ADVANCED Po HDD MANAGEMENT ABNORMITY eee Alam fo Config 5 Record 3 ACCOUNT SNAPSHOT 0 5 AUTO MAINTENANCE ADDTIOMAL FUNCTION Refer to the following sheet for detailed information meme Fm Alarm output There is only one output channel Please click the button 1 Enable disable alarm output device Search alarm output status 51 7 3 3 Record Contiguration E Control Panel Record ef Query System Info user E VERSION BP HDD INFO Mode all LOG Schedule i Fle dy System Config Manual 2 E GENERAL Stop r EE ENCODE E SCHEDULE Da R5232 a NETWORK fg ALARM B DETECT 3 PAN TILT ZOOM j Ca DEFAULT BACKUP ADVANCED o 3 HDD MANAGEMENT ABMORMITY Alarm O Config a ACCOUNT iE SNAPSHOT 0 53 AUTO MAINTENANCE ADDTIONAL FUNCTION Refer to the following sheet for detailed information meme Fm System enables auto record function as set in record schedule setup Stop Stop curren
70. the device management server 57 7 4 3 Talk Encode Set audio compression bit rate It includes PCM G711a G711u Configuratiom E Control Fanel S Talk Encode T B Query System Info E E VERSION E HDD INFO BI Log H 4 i System Config Ss GENERAL D ENCODE SCHEDULE B R5232 D NETWORK Talk Encode Gra D ALARM DETECT Da PAN TILT ZOOM EE E DEFALILT BACKLIP ci ADVANCED a HDD MAMAGEMEMNT i ABNORMALITY i Alarm IjO Config Record E ACCOUNT i SNAPSHOT 5 AUTO MAINTENANCE 7 ADDTIONAL FUNCTION i Auto Register Config EE ex Tak Encode 58 8 Search See chapter 6 3 to see how to access to the configuration menu CONFIG LOGOUT Click search button the following interface appears E Search Type as Record Begin Time C Alam End Time Motion Local Picture File Size k B DU 9541 z Parameter Channel r Operation GEN Download Type File 1 Open Local Record Earliest Rec Watermark File Path C RecondDownloads1 File Hame 10 10 5 82_ ch1_20090806_143711 dav m F3 Page Down Emphasize All Download Speed Oks Select record playback mode and then select start time end time and channel Click search button the corresponding files in the list appears Select the file s to download and click download button system pops up a dialogue box Specify file name and path to download t
71. the system can automatically install the control When the system is upgrading it can overwrite the previous Web application too If you cannot download the ActiveX file check whether you have installed the plug in to disable the control download Alternatively you can lower the IE security level Internet Options e nan jann 8 f Security prj i i 3 ear General Y Privacy Content Connections Programs Advanced PSAE T Select a zone to view or change security settings Sende L ActiveX controls and plug in e h Allow previously unused ActiveX controls to run without pror Internet Local intranet Trusted sites Restricted C2 Disable sites C Enable gt Allow Scriptlets C2 Di Internet e This zone is For Internet websites except those listed in trusted and restricted zones Prompt MI Automatic prompting For ActiveX controls Disable Ce Enable gt Binary and script behaviors Custom Administrator approved Custom settings Disable To change the settings click Custom level To use the recommended settings click Default level Security level For this zone A Nienlsy vidan sand snimstinn an a mahnana that daac nok icc Ms Takes effect after you restart Internet Explorer Custom level Default level Reset custom settings Reset to medium high default Reset all zones to default level ES Xx i
72. tivation iv Capture Set 1 I0 sec 107300 m fo sec 107300 t Anti dither 5 sec 715 Default Save Refresh The dark blue squares correspond to a zone with active detection 47 BEER ILICE RE x Refer to the following sheet for detailed information meme ion Region after you select motion detection type click this button to set motion detection zone There are PAL 22X18 NTSC 22X15 zones Double right click mouse you can go to full screen display mode Remember clicking OK button to save your motion detection zone setup Period Motion detection function becomes activated in the specified periods There are six periods in one day Enable corresponding period Select date or whole week Click OK button system goes back to motion detection interface Click save button to exit Anti dither System only memorizes one event during the anti dither period The value ranges from Os to 15s Normal out There is 1 channel alarm output Corresponding to motion detection alarm output port Enable alarm activation function You need to select alarm output port so that system can activate corresponding alarm device when alarm occurs Alarm Latch System can delay the alarm output for specified time after alarm end The value ranges from 10 seconds to 300 seconds Record Channel System auto activates motion detection channel to record once alarm occurs works with motion detection fu
73. to drag the channel tile position Channel Title S Click save button after complete setup for one item or complete the whole setups and then click save button Refresh Click this button to get device latest configuration information Click watermark button to open interface as below WMK Setting Stream Type ERN Type Character Characte DigitalCCT Cancel 7 2 3 Schedule Set differents periods for various days There are max six periods in one day Configuration E Control Panel SCHEDULE aa BP o 2 nto Channel Channel 01 7 Prerecord 5 sec Period Info HDD INFO 4 LOG Bl Reaular MD Storage Fl fF System Config 4 8 a GENERAL a ENCODE 3 SCHEDULE Sj R5232 NETWORK a ALARM fa DETECT 3 PAN TILT ZOOM a DEFAULT BACKUP ci S ADVANCED a HDD MANAGEMENT a ABNORMITY Ea Alarm I O Config 3 Record a ACCOUNT a SNAPSHOT Ea AUTO MAINTENANCE 9 ADDTIONAL FUNCTION Storage Set Default Current Record Snapshot iv Syn All Data Syn Data Time Scop 1 nagus MD uem enu MO Alea Periodi 0000 H 235858 I M M AM M Event Type Regular Record Peiod2 0 00 00 2359859 Local Storage IV Period 3 0 00 00 23 59 59 pelan Net Storage gt Emergent Storage Local Period 4 0 00 00 7 23 59 59 e Syn Data Period 5 0 00 00 7 23 59 59 Period 6 00000 NI 23 59 59 R m Snapshot Local Storage T AI
74. tware can damage your computer or violate your privacy You have asked to install the following item qe ie tab plus 1 95 20100930 fztsm xpi Author not rerified file C DocumentsS20andN20Settings 12610 WE5NAlNOCNEOWODWA2 ie tab plus After installation restart Firefox 2 After restart of Firefox choose Tools Add ons to check if the plugin has been installed Add ons ff Get Add ons Extensions Themes Plugins e 1 new add on has been installed ka IE Tab Plus 1 95 20100930 S An enhanced version of IE Tab which enables you to use the embedded IE engine within Mozilla Firefox Find Updates i 3 After installation add the target address to IE Tab before start to access device web client At the sametime select IE Tab plus Mode IE Tab Plus Options General Settings Sites Filter UI Prefz External Application Select IE Tab Plus Bode Full Mode Support Adblock Plus Sync Cookies Support Price Comparison Q Featured mode Recommended please select this option to keep IE TAB free Can be disabled anytime Support Price Comparison Basic Mode Privacy Policy For example here device address is http 10 15 5 127 so type http 10 15 5 127 to the URL option 72 IE Tab Plus Options General Settings Sites Filter UI Prefs External Application Rules Enabled Sync Cookie Sync User Agent Switch Back To Firefox in New Page L file AA o mb o o f http VN
75. www no ip com activate lid e6aecf8ecc3ada8a Remember that you can use our dynamic update client to automatically update your host when your dynamic IP address changes You can download the client at http www no ip com downloads php If you have any further questions please refer to our FAQ at http www no ip com fag php and guides section at http www no ip com guides php If you still have questions contact support by opening a trouble ticket at http www no ip com ticket Thank you for choosing No IP com 5 Now you can see an interface You have successfully created an account 65 Download Services Support Company No IP is Free Sign up Now Home Free SignUp Account Confirmed Your account has been confirmed and is now ready for use Please use the login box above to login to your account Please note Your NoJP Free host names must be updated every 60 days to keep your account active For an account with no expiration and many other benefits consider No IP Enhanced or No IP Plus 6 Clickto sign and enter the email address and password you get earlier Click login to sign up you can see the welcome interface and configuration option of account You can highlight manage host item w no ip Nea Redirects Plus Managed OS WR Ln TORTE 8 ES DES D amp 5 Cenificates DERI Haning ponei Backus OS eree Active 2 Your No IP Henrique welcome to your Mo JP Last Login nom iP Yau have succes
76. ystem just begins recording Record System automatically enables recording function Alarm Record when alarm occurred When video changes system automatically enables Motion Detection Record record operation There are 255 layers Time Title Display is the bottom layer and 255 is the highest layer means completely transparent and 255 is opaque Channel Title Display Please refer to the above information Privacy Mask Max supports 8 zones Local Micro SD storage Support high speed card low speed card Storage Based on SDK network storage Supported Network alarm local alarm 2 ch local network alarm output output Local alarm network alarm input 4 ch local network alarm input Activate alarm via motion detection or external input Please enable pre record function when activating the alarm Upload image email Upload automatically Event Management NVS provides device information video information COM setup record setup motion Send out alarm notice via email HTTP andiexternal port Support de jitter when alarm occurs frequently Support video short time buffer storage before or after alarm Pre record is 2Mbytes Buffer storage video of 5s Control RS485 PTZ control Support various protocols On line Upgrade Network remote upgrade Use upgrade tool Device Management Network client end Log in the client end software in the PC to monitor IPC A detection setup alarm setup OSD informati

Download Pdf Manuals

Related Search

Related Contents

取扱説明書    Guía del administrador de Document Portal  Ejari User Manual  Samsung UN22D5000NG Manual de Usuario    Caesars Palace, Las Vegas – 20-23 April 2015 Forum  SERVICE MANUAL  Samsung 460UXn Instrukcja obsługi  Wichtiger Hinweis  

Copyright © All rights reserved. Failed to retrieve file