inpO2 v3.0.3 Release Notes.fm
Contents
1. The Variables list for Text Marks is now adapted to inpO2 editions Anchor points had unexpected behavior on page groups The anchor points in page groups will include only the page trims and positioning will no longer be based on half margins In the Page Group properties the proper Gutter fields are grayed out according to page group orientation Margin values were swapped in lateral page groups Values now display as expected Layout Manager 3903 Back and forth changes between the Layout Manager and the Light Table with single side jobs no longer cause crashes al Dynagram inpO2 Release Notes v 3 0 3 Page 20 of 20 Document Manager e 4058 Scaling of multi page PDF file now behaves correctly the horizontal and vertical values are changed as expected Ink Manager e 2071 Colors from documents containing PDF Shading are now detected correctly e 4063 inpO2 Layout Ink used for proofing now overprints other colors in PDF output files Output Configuration e 4104 The Variables list in File Naming Convention dialog is now adapted to inpO2 editions e 4233 Default value was no for the Embed Mark Fonts option which sometimes caused Output failure The default value is now yes 12 Customer Feedback Your feedback on inpO2 is important to us Please take the time to send your comments and requests to support dynagram com Thanks in advance Dynagram R amp D and Support Teams2. any addition or edition of a mark on the current layout automatically creates a mark set When all marks are correctly positioned on the current sheet they can be saved as a set and applied to other sheets or reused in any other job inpO2 Mark Sets have intelligent and accurate positioning based on the anchor points that were selected on the mark and its parent sheet page gutter at the time of the creation When the marks are placed on the layout all anchor points and distance values are recorded and the same positioning rules are applied when placing the Mark Set onto the new layout Mark Sets include all inpbO2 static and dynamic marks e Page and Fold marks e Sheet center marks e Side guides 4 Available in inpO2 standard edition only ns Dynagram inpO2 Release Notes v 3 0 3 Page 6 of 20 1 9 e Imported Marks Text Marks e Collating Marks e Register Marks e Density Bars e Linear Marks Saved Mark sets can be directly used by the Planning module Other Light Table Enhancements Object Properties A new Object Properties floating dialogue replaces the previous position palette to ease the edition of any object with immediate changes on the Light Table Not only the position and size but all object properties can be edited from the same dialogue as it dynamically adapts to the object that is selected on the layout The Object Properties dialogue is available from the toolbar but also by double
3. s edge See Wizard improvements above Work and Turn option caused error due to incompatibility with Folding value Validation now greys out this option when folds are in odd number Wizard freezed if server was disconnected New inpO2 projects using the Wizard are no longer trying to relink with last document file when not found Menus amp Tools 3722 3872 3886 3970 4066 4198 4387 Object Properties were not refreshed unless dialogs or panels were focused on Object Properties now display as expected Non modal dialogs do not have focus despite their displaying This behavior has been corrected and keyboard actions do occur in those dialogs Hitting Enter behaved differently with different dialogs The Enter key now has similar behavior in most dialogs When no button context is present in the dialog hitting Enter creates a Custom element 3992 Controls in the Object Properties dialog now redraw dynamically to expected size and position 4170 Button labels in Presets dialogs were unclear See Presets dialogs enhancements above French version Missing translations in the user interface have been added Deleting a mark set and clicking back on the mark set tool sometimes caused an Acrobat failure while working on the light table This no longer happens Light Table 3874 4104 4240 4244 4288 Acrobat window sometimes lost focus when working on light table It now regains focus after each operation
4. 0 90 180 and 270 degrees in objects contextual menus Document Manager e 3405 Undo function has been reinstated for Odd and Even Page adjustments 3865 Undo function has been reinstated for changing the document source box Ink Manager 3943 3832 inpO2 Ink Manager keeps its data after viewing a PDF file Better support of ink mapping for trapped PDF files from EskoArtwork Nexus e 3929 Layout Ink produces its own color separation Assembly Manager 1253 2060 Creep Paper thickness field does not convert values unnecessarily In the Assembly Manager removing a template referenced in the Undo stack of actions does not crash anymore e 2232 Applying a partial web after a work amp turn now works as expected al Dynagram inpO2 Release Notes v 3 0 3 Page 18 of 20 3595 3773 3774 3793 4041 In the Assembly Tree adding webs to a booklet containing a work and turn now works as expected Pages of partial webs are correctly positioned when using a template that contains the plate information The Assembly Manager remains enabled after closing an assembly project when multiple project files are open Assembly Manager is now synchronised correctly with Layout Manager The Templates area of the Assembly Manager is now cleared after deleting the press run and related product parts Layout Manager 2672 3453 3647 3750 3866 3903 3857 4046 4079 Output 2115 3467 3601 3728 385
5. Press Run Ganging a Fe D El Properties Ge v B T Name Press Run 1 ME Press Run 1 Ganging TEET PostCard4 Hat 1 000 1 000 apn PostCard2 Fiat 1 000 1 000 d ve PostCard3 Fiat 1 000 1 000 EES Perfecting Paper 12 x 18 in Coated Finishing Method Default Mark Set Default Mark Area Offset 0 250 in E Statistics O Number of Product Part 3 Paper Waste 63 51 Number of Sheets 1 Run Length 1000 Checkpoints 3 Wasted paper ratio af Paper format vs Press A Paper thickness vs Press af Work style vs Press f Finishing style vs Press run f Page format vs Finishing method af Actual quantity vs Requested quantity af Printable area aS Documents The Optimization module offers Support for any number of product parts flat or folded in same press run e Support for any number of press runs in same project 1 The Optimization Module is offered as an option to inpDO2 ATOM users al Dynagram inpO2 Release Notes v 3 0 3 Page 3 of 20 e Use of equipment specifications press and finishing for layout calculation e Use of paper grain direction for layout calculation Use of different bleed values for layout calculation Drag amp drop of PDF documents to initiate the layout e Built in Check points for layout preflighting see below e Production statistics In addition to the Layout Manager a new Step amp Repeat tool is available from the Light Table This tool allows for the edi
6. clarified The Snap item was relocated in the inpbO2 main menu The dongle information displays well in the splash screen for all license types cosmetic change only Zooming out on a new Layout when inpO2 rulers are enabled now works correctly Document Manager e 3181 In the Page Adjustment dialog the drop menu for document rotation now only allows for supported values a Dynagram inpO2 Release Notes v 3 0 3 Page 16 of 20 10 Enhancements and Fixes in Release 3 0 2 Although release 3 0 2 is a free revision it includes a number of new functionnalities that will enhance the user experience Languages _ inpO2 v 3 is now available in French and Spanish with complete user documentation DEMO Version Starting with v 3 0 2 a free 15 days DEMO version is available for download from Dynagram web site The DEMO includes all functionalities of inpO2 standard edition plus the functionalities of the Planning module Working files can be saved and reopened and all display profiles are available for on screen proofing However no PDF output can be produced The DEMO version can be upgraded into a licensed version without having to reinstall the application Optimization Page colors now enhance the visual feedback when ganging different product parts The color code helps for the quick recognition of same product part instances on the sheet As for other page information the display of product part colors is activated through inpO2 P
7. clicking on any object selection Object Positioning inpO2 v 3 gives more control for object positioning on the light table with new selectable anchor points Any anchor point can now be clicked directly on the selected object for precise and intuitive positioning offset scaling and rotation When scaling or rotating the object the active anchor point remains fixed on the sheet Object Properties Register Mark Custom m a Filled Cirde 0 062in 0 5pt 0 250 in 0 250 in 0 5 pt 10 210 in 22 149 in 8 790 in 9 899 in 100 00 100 00 ae Dynagram inpO2 Release Notes v 3 0 3 Page 7 of 20 1 10 Intelligent Page Marks In order to prevent possible overlaps inpbO2 now detects the proximity of other page groups and automatically shows or hides page marks depending on the available space between adjacent pages Fold Marks The length of the Fold Marks can now be edited Text Marks Options for Text Mark alignment within a box have been added for better control on mark positioning Collating Mark This mark is now positioned based on its parent page instead of a page group gutter The mark also moves with the page Options were added for the text direction of the index within the mark The text direction can now be horizontal upward or downward Sheet Tool A toolbar button has been added to ease access to Sheet Presets and to the Insert Sheet action inpO2 Pro
8. for more flexibility in the positioning of page groups The users are now offered new alignment choices in the Wizard s Sheet Definition panel the Page Group Alignment can be set to Center or Snap to Gripper Also in the Page Group Definition panel four independent Margins settings are now offered Presets dialogs enhancements The Presets dialogs have been modified to propose clearer action labels to the user thus leading to a more confident operation For example the brief OK button was changed to a more explicit action button such as Apply Pagination Apply on Layout Use imported mark etc al Dynagram inpO2 Release Notes v 3 0 3 Page 19 of 20 Installation and Protection 1280 1813 4232 4237 4260 Wizard 3951 4106 4137 4253 4259 4280 Various enhancements were done to inpO2 License Manager to ease the dongle update process inpO2 OS X installation worked only in the user account from which it was installed inpbO2 installation now has installation parameters independent from user accounts inpO2 Vista installation with option Run as administrator unchecked caused incomplete installation Installer was corrected to force the Run as administrator option Unnecessary display of Language change message occured after installation Installer was corrected Different users now have their own preferences The Wizard could not offset a page group and align it on the gripper
9. or 10 5 Adobe Acrobat 8 1 2 is needed for full 10 5 compatibility 256 MB of RAM 512 MB recommended e 1060 MB of available hard disk space e 1 024 x 768 screen resolution 1 280 x 1 024 recommended e CD ROM drive if installing from a CD USB Port for hardware key Acrobat 9 for Macintosh Software Requirements Adobe Acrobat Professional Version 9 x Hardware and Systems Requirements PowerPC G4 G5 processor G5 recommended or Intel processor e Mac OS X v 10 4 9 or 10 5 256 MB of RAM 512 MB recommended 1060 MB of available hard disk space 1 024 x 768 screen resolution 1 280 x 1 024 recommended Safari 2 0 4 browser CD ROM drive if installing from a CD USB Port for hardware key al Dynagram inpO2 Release Notes v 3 0 3 Page 12 of 20 5 1 5 2 5 3 Installation inpO2 Network See the nstalling inpO2 Network booklet provided with the HASP HL Net USB key for all instructions regarding the installation of your multiple license package Macintosh OS X e Before starting the installation ensure that your USB dongle is NOT connected to your computer e Double click the inpO2 installation file e Follow the instructions of the Installer e If you have more than one instance of Adobe Acrobat on your computer select the one into which you want to install inpO2 plug in At the end of the inpO2 installation the HASP driver installer will be launche
10. 2 menu in Acrobat s menu bar will show only the controls needed for product activation However if this happens during the 15 first days of the installation the product will revert to the Demo mode To see your license and dongle status choose About inpO2 from inpO2 s menu Activating inpO2 In order to activate your inpO2 license you need to send your USB dongle information to Dynagram or to your distributor e Connect the dongle to a USB port of your computer e Launch Acrobat e In Acrobat choose License gt Create License Request from the inpbO2 s menu Browse and save the c2v customer to vendor file on your computer and email it to Dynagram at activation dynagram com or to your distributor with your activation request This encrypted file contains the image of your hardware key and all its license history al Dynagram inpO2 Release Notes v 3 0 3 Page 14 of 20 6 5 8 Upon receipt of your activation request Dynagram or your distributor will send you back a v2c vendor to customer file that you need to load into inpO2 dongle to activate the license Ensure that your dongle is still connected and choose License gt Install License from inpO2 s menu e Browse to the v2c file on your computer and click Open e Relaunch Acrobat to activate inpO2 plug in Upgrading inpO2 The steps needed to upgrade your inpO2 license are the same as for the initial activation by the exchange of c2v a
11. 3 3890 Page color enhances visual feedback when ganging different product parts Switching repeatedly between different Product Pars or Press Runs in the Layout Manager remains stable Optimizing with too many product parts for the surface now displays an actual quantity of 0 for extra parts Easier navigation for the creation and edition of Presets through different dialog accesses In the Layout Manager the label Mark area offset has been renamed Distance between edge and finished product With single sided layouts editing back and forth the Layout Manager and the Light Table remains stable Project names are displayed as Managed Layout in the title bar When dragging a multiple page PDF in the Layout Manager tree the largest possible folding is automatically selected New icon for ganging press runs PDF versions available in output dialog are filtered based on source documents Output files are replaced correctly when using Output missing files only and multiple Press Runs Outputting files with accents or special characters in the file name has been resolved In main Output dialog the OK button has been renamed Output Default naming convention for output files has been modified to ease Wizard projects The selection of another Output Configuration refreshes correctly the Destination field 11 Enhancements and Fixes in Release 3 0 3 e Wizard improvements The wizard capabilities have been enhanced to allow
12. a Dynagram inp OANDABRWDNDH inpO2 Release Notes v 3 0 3 January 27 2009 What s New in inpO2 v 3 0 inpO2 Editions and Modules inpO2 vs PDF Format Minimum System Requirements Installation License Activation Upgrade Compatibility with Previous inpO2 Versions Known Issues and Limitations Fixes in Release 3 0 1 Enhancements and Fixes in Release 3 0 2 Enhancements and Fixes in Release 3 0 3 Customer Feedback 1 What s New in inpO2 v 3 0 inpO2 version 3 0 is an extensive revamping of the application It offers new powerful features distributed among different editions and optional modules and is simpler to use The most exciting addition is the ability to automatically generate a layout by the selection of print production equipments and materials This section only highlights the changes in the current 3 0 release compared to the previous 2 5 version For a complete feature list refer to inpO2 brochure or User Manual File Edit View Document Comments Forms Tools inpO2 Advanced Plug Ins Window Help 2 6 7 8 2 S800 el jo m OM eel bid o 5c_Inspiration_CON_05 Requested Quantity 1000 Page Format Custom Grain Either 1x1 8 0pt 2 5c_Inspiration_CON_07 Flat 2 00 Actual Quantity 1000 ns Dynagram inpO2 Release Notes v 3 0 3 Page 2 of 20 1 1 1 2 1 3 New Compatibility inpO2 v 3 is now com
13. ased on alternate production capabilities Check points will warn the user if any anomaly is found on the layout Press runs for bound product parts can be mixed with any number of other press runs for flatworks in the same managed layout so the user can address any production challenge in one single project The resulting assemblies are fully integrated with other inpO2 functions such as the Assembly Manager the Document Manager the Light Table etc 2 The Planning Module is offered as an option to inpO2 users It is not available in ATOM 3 Multiple web paginations are not supported in the Planning Module an Dynagram inpO2 Release Notes v 3 0 3 Page 4 of 20 1 5 Wizard Enhancements Panels have been slightly redesigned to ease user experience The Wizard now offers Ability to override detected page format pdf document trim box Ability to select smaller page groups using folding presets Automatic calculation of minimal margin values to allow for bleed and marks positioning New validations to prevent mark page overlap The Step amp Repeat project type now supports multiple page documents and creates one full plate for each page single side or both sides inpO2 Project Wizard Document Pk Source Document EN Name Atom_Edition_QuickStart Number of Pages 3 Page Width 8 500in Page Height 11 000in Creator Acrobat Distiler 8 1 0 Windows 1 6 Layout Checkpoints This uniq
14. consistent with Acrobat s preferences 3738 Moving sheets using Acrobat s Page Panel now works correctly Installation protection and backward compatibility 1962 New Uninstall feature on OS X 3695 Warning message when dongle is absent or removed has been enhanced 3771 A problem with inpO2 license menu items being disabled after the dongle is unplugged has been fixed 3798 The Save As dialog for the C2V file has been reviewed 3858 Custom preferences for Register Mark Group in v 2 x are selected by default in the presets when upgrading to 3 x 3875 Using a custom folding from 2 5 x that is not present in 3 0 x presets works correctly Save amp Load 3719 Text Mark the variable Press Run Name is now saved al Dynagram inpO2 Release Notes v 3 0 3 Page 17 of 20 Wizard 3380 3484 3501 3696 4017 Progress bar added to the Wizard during file loading A rounding problem when using measurement units other than Acrobat s has been fixed In the Wizard first panel the source document name is truncated when its too long In the Wizard the default Bleed value has been set to 0 125 instead of 0 1111 inches Page rotation applied in PDF source document are now supported as is Any missing rotation for landscape portrait usage should be done in Acrobat before imposing the PDF file Light Table 3350 3573 3705 3706 3717 3735 3847 3859 3869 Back sheet size is now updated correctly after resizing the sheet Lin
15. d This installation is required for the proper functioning of the USB hardware key dongle Make sure the dongle is not connected until the process is completed NOTE If you already have a HASP driver installed on your workstation for a third party application a message will warn you that HASP cannot be installed on this computer Simply close the dialogue e Once the process is completed inpO2 will be found in the plug ins folder of the Acrobat instance that you have selected e The next step is to activate your license see section 4 below e Here is the list of all installed files on Mac OS X inpO2 plug in Applications Adobe Acrobat 8 0 or 9 0 Professional Adobe Acrobat Professional app Contents Plug ins inpO2 acroplugin Documentation Applications Adobe Acrobat 8 0 or 9 0 Professional Adobe Acrobat Professional app Contents Plug ins Dynagram inpO2_User_Manual pdf All Tutorial files are available from the CD Windows e Before starting the installation ensure that your USB dongle is NOT connected to your computer e If you are upgrading from a previous inpO2 version you may want to deinstall the old inpO2 application from the Control Panel to ensure a clean new installation e Insert the CD and follow the instructions of the Installer or double click on setup exe if the installation process does not start automatically At the end of the inpO2 installation the HASP driver installer will be launche
16. d This installation is required for the proper functioning of the USB hardware key dongle Make sure the dongle is not connected until the process is completed e NOTE If you already have a HASP driver installed on your workstation for a third party application a message will warn you that HASP cannot be installed on this computer Simply close the dialogue Once the process is completed inpO2 will be found in Acrobat s plug_ins folder e You can find all inpO2 documentation in the Dynagram subfolder e The next step is to activate your license see Activating inpO2 in section 5 below e Here is the list of all installed files on Windows inpO2 plug in C Program Files Adobe Acrobat 8 0 or 9 0 Acrobat plug_ins inpO2 api Documentation C Program Files Adobe Acrobat 8 0 or 9 0 Acrobat plug_ins Dynagram inpO2 User_Manual pdf All Tutorial files are available from the CD al Dynagram inpO2 Release Notes v 3 0 3 Page 13 of 20 6 1 6 2 6 3 6 4 Important Acrobat Setting Windows only e Before working with inpO2 go to Acrobat s preferences dialog by choosing Edit gt Preferences In the Categories list select Documents and uncheck the first option Show each document in its own window More information The Multiple Document Interface MDI option of Acrobat creates a new Acrobat window for each document As it may cause serious display problems after opening and closing inpO2 working files disabling
17. e fly Preset creation and recall All user Presets are quickly accessible from drop lists in the toolbar inpO2 Presets are always self maintained and easy to use H m T T O T Te 4G v Of Default T Default Output time Helvetica 11 pts Center aligned T Default Output time Helvetica 11 pts Left aligned n a yli Default Output time Helvetica 11 pts Right aligned aa EE T Default Text Helvetica 11 pts Center aligned aim if Default Text Helvetica 11 pts Left aligned UT Default Text Helvetica 11 pts Right aligned 1 Of Default Text Helvetica 9 pts Center aligned 1 Af Default Text Helvetica 9 pts Left aligned Uf Default Text Helvetica 9 pts Right aligned Presets m T TT T m These object definitions can be saved as presets e Plates and Sheets e Page Groups Imported Marks with separate presets for images e Text Marks with separate presets for Text expressions e Collating Marks e Register Marks and Groups Density Bars e Linear Marks e Foldings e Presses e Papers e Page Formats e Finishing Methods Presets can be edited in resizable dialogs with splitters and expandable nodes They are saved as preference files one file by object type and can be exchanged provided they are placed in the appropriate local folder New Mark Sets inpO2 v 3 also unveils innovative Mark Sets to inpO2 users Mark Sets could not be simpler In fact
18. ear mark an offset of the mark width within its selection box has been corrected The Object Properties palette is cleared when unselecting an object A multi selection with Object Properties palette already opened remains stable Density bar position is correct when square size is greater than gutter and when using Page Trim bar type Text mark refreshes correctly when dragging sheets Deletion of objects does not conflict anymore with Object Properties palette Object Properties palette button reacts correctly with multiple objects selected Ruler guides can now be used to snap objects Menus amp Tools 2109 3373 3710 3723 3828 3860 3873 3893 3894 3971 4060 Collating Mark Index Value correctly follows the appointed booklet Ability to rename and overwrite all existing Presets User preferences for dialog splitters are now kept for Object Properties palette An unstability with Mark sets dialog has been corrected Enhanced Mark Set dialog using inpO2 Presets look and feel The unstability with Object Properties palette when closing and creating projects has been resolved The inpO2 Open dialog remembers last opened file name correctly The page head orientation terminology has been reviewed to ease understanding The controls for using Page Formats in Portrait or Landscape have been redesigned User preferences for dialog splitters are now kept for Mark Sets and Imported Mark Image dialogs New shortcuts for rotation
19. files Existing inpO2 Profiles have been reorganized and a new information has been added for Product Part Name and Product Part Colors effective with v 3 0 2 Progress Bars Progress bars have been added for longer operations more than 2 seconds such as the recalculation of the entire layout Document Manager and Imported Marks Enhancements The Document Manager and Imported Marks dialogues have also been redesigned to ease user experience Page Adjustments are now integrated within the Document Manager and can be set at the page or document level by selecting a tree node in the left panel an Dynagram inpO2 Release Notes v 3 0 3 Page 8 of 20 Document Manager Project Tree i 1 as ri Page Properties FOATLT E J Layout Job Product Part E Page Adjustment S 5 1 3 Atom_Editon_QuidStart v2 pdf Source Box to be ali Media Box 1 Anchor Midde Center E 2 Horizontal Offset 0 000in Es Vertical Offset 0 000 in Rotation 0 00 deg AT M 9 m Scaling 100 00 Quick Start Horizontal 100 00 Jay AION Eitin Vertical 100 00 rentan 2 5 Cancel creep compe No ils i daians is are yue Uwe bashes A niti iU AOA cece tines Black Cyan Magenta Yelow The dialogues can be resized and a panel contains enhanced page previews with zoom and scroll bars The loading of multiple files is now possible for PDF documents or marks Advanced PDF and JDF Output Options Output C
20. his option will restore all existing page adjustments It is also possible to relink documents manually in v 3 x run list Any page adjustments will have to be done again Known Issues and Limitations Known Issues in Version 3 0 2 Acrobat Integration e 2505 On Windows a crash happens when checking the Show splash screen option in Acrobat preferences It is recommended to leave this option unchecked Light Table e 3766 In Pages properties more decimals are required for the fields Thickness and Offset from Bleed al Dynagram inpO2 Release Notes v 3 0 3 Page 15 of 20 e 3806 When using Plates with Sheet Alignment offset values in Perfecting mode the back of the sheet is not positioned correctly Layout Manager e 2521 Tooltips in the Layout Manager have been disabled for better dialogue robustness e 3886 Hitting Enter adds a new Press Run in the Layout Manager Known Limitations with Acrobat API The following limitations depend on Acrobat API or third party developers and may not be fixed in the current products versions e 0161 e 0166 e 0367 e 1247 e 2194 e 2870 e 3062 Non modal dialog should capture key strikes such as Ctrl Z and Up and Down arrows defect ID 1286202 0167 0269 and 2828 There is no Undo possible for inserting or deleting a PDF sheet This limitation also prevents the use of Undo for actions done through in the Assembly Manager and Layout Manager inpO2 does not dis
21. le with Adobe Acrobat 8 and 9 System requirements follow those of Acrobat 4 1 and may differ for each version Windows Acrobat 8 for Windows Software Requirements Adobe Acrobat Standard or Professional recommended Version 8 x Hardware and Systems Requirements Intel Pentium III processor or equivalent e Windows Server 2003 SP1 Windows XP SP2 or Windows Vista e Microsoft Internet Explorer 6 or 7 e 256 MB of RAM 512 MB recommended e 860 MB of available hard disk space e 1 024 x 768 screen resolution 1 280 x 1 024 recommended e CD ROM drive if installing from a CD e USB Port for hardware key Acrobat 9 for Windows Software Requirements Adobe Acrobat Standard Professional recommended or Pro Extended Version 9 x Hardware and Systems Requirements 1 3 Ghz processor or higher Microsoft Windows Server 2003 SP1 Windows XP SP2 or Windows Vista Microsoft Internet Explorer 6 or higher 256 MB of RAM 512 MB recommended 860 MB of available hard disk space 1 024 x 768 screen resolution 1 280 x 1 024 recommended CD ROM drive if installing from a CD USB Port for hardware key 4 2 Macintosh iO Mac Universal Acrobat 8 for Macintosh Software Requirements e Adobe Acrobat Professional Version 8 x Hardware and Systems Requirements PowerPC G4 G5 processor G5 recommended or Intel processor e Mac OS X v 10 4 3
22. les offered by Adobe to ensure that the document is best adapted to your print production requirements Before imposing documents in inpO2 use a PDF preflighting tool to detect and possibly correct problems that can be found in the documents such as color environments bleed fonts etc inpO2 and PDF X File Integrity at Output inpO2 accepts PDF X source files but does not necessarily generate PDF X output files The PDF X certification is given to a PDF file once a preflighting procedure based on a specific PDF X profile has been performed inpO2 can not certify its own PDF imposition files as it is nota preflighting application However inpO2 does not alter the content of the source documents When PDF X certified documents are imposed no additional element is added to them and no element is filtered inpbO2 entirely relies on Adobe Acrobat technologies to manage PDF contents It takes pages as a whole and embeds them into the imposed document then adds basic PDF shapes to create printers marks The only modification that may occur to input pages is when an ink from a source document is manually mapped to another ink In this case inpO2 will alter the name of the inks in PDF pages or in PDF imported images such as color bars Therefore if all source documents are PDF X no problem should be expected at output al Dynagram inpO2 Release Notes v 3 0 3 Page 11 of 20 4 Minimum System Requirements inpO2 v 3 is compatib
23. n Module Document Manager v v Page Adjustments v Ink Manager v Assembly Manager v Template Export Import v Web pagination algorithms Web Press Module Come and Go pagination Web Press Module ae WA Sheet optimization for ganging Optimization Module Planning for bound jobs Planning Module PDF Output v v JDF Output Z v Vv included _ not included optional a Dynagram inpO2 Release Notes v 3 0 3 Page 10 of 20 3 3 1 3 2 inpO2 vs PDF Format Support of PDF Source Documents inpO2 product line targets a large array of professional printers working in PDF workflow environments Many functions such as the Ink Manager and the Page Adjustment module require a robust PDF format structure that is adapted to prepress processes inpO2 users should be aware that PDF X standards ensure the most predictable and reliable files for print production PDF X standards define the correct rendering behavior of the files in the RIPs that drive proofers image setters and CTP devices Therefore PDF X files should always be priviledged when working with inpO2 imposition application However it is a fact that printers receive PDF files from customers that are not always skilled for the creation of press ready files Dynagram strongly recommends the following e When creating the PDF file ask the customer to use the Press Quality profile or one of the available PDF X profi
24. nd v2c files see above section It is important to wait for the reception of the v2c file before you install the upgrade otherwise you will not be able to use the product in the meantime unless you revert to your previous version s installation Upgrade Compatibility with Previous inpO2 Versions Please read carefully this section if you are upgrading from a previous inpO2 version Working files from inpO2 version 1 x can not be reopened in a version 3 x They must be resaved in v 2 x first Working files from inpO2 version 2 x are supported with the following minor restrictions e 3580 Text marks will import with a 15 inch box these boxes were not existing in previous versions There should be no visual impact on the layout unless the content exceeds 15 inches in which case it will be cropped e 3594 Sheet Center marks that were placed on two sides only in v 2 x Top Bottom or Left Right will be displayed on all sides when the layout is reopened in v 3 x e 3808 Collating marks are now linked to pages and not to gutters Collating mark offsets from the gutter that were applied in 2 x projects are not retained New offsets can be applied in v 3 if required e 3687 When opening a 2 x project unavailable documents in the Run List moved to another location not accessible on the network or deleted will revert to Reservation pages Two solutions are possible Open the project in v 2 x and fix broken links before migrating to v 3 x T
25. onfigurations inpO2 v 3 is able to integrate with most PDF and JDF workflows using a flexible set of output parameters The Output module has been reworked to ease the user experience and keep the main dialogue as simple as possible while allowing for advanced output configurations in a compact and dynamic set of options Multiple Output Configurations can be saved with custom output file naming PDF version font inclusion folder destination delivery method etc The JDF options include the support for imposed flats JDF 1 2 and 1 3 Mime packaging delivery Cutting parameters and more A progress bar has also been added for more predictability when outputting JDF Certified inpO2 is fully compliant with JDF 1 3 LayCrimp ICS and has been officially certified by PIA GATF program certification number 0810000302 0810000302 i Dynagram inpO2 Release Notes v 3 0 3 Page 9 of 20 2 inpO2 Editions and Modules inpO2 is available in English French and Spanish languages The following table compares the features found in inpO2 editions and available modules Please contact sales dynagram com for details inpO2 ATOM inpO2 Standard Network Licensing v Job Wizard v v Light Table Imposition Objects v v Plates v Presets v v inpO2 Profiles Defaults only v Mark Sets v i v Checkpoints Optimization Module sf v SBE Repeat tool Optimizatio
26. patible with Acrobat 8 and Acrobat 9 It runs natively on both Intel and PowerPC based Mac computers Universal Binary It has been successfully tested on the newest Mac OS X 5 Leopard Adobe Acrobat 8 1 2 is needed for full Leopard compatibility Different Approaches for Layout Creation The all in one inpO2 solution now gathers the best of all worlds a Wizard for fast and easy job creation the Light Table for template creation and fine control on all objects and the Assembly Manager with powerful pagination algorithms including pagination for web presses Starting with version 3 a new Layout Manager dialogue has been added on top of existing approaches and allows for sheet Optimization and Planning of bound jobs No matter which module initiates the project the resulting press sheets are shown instantly on the Light Table ready to be inspected and corrected before the layout is delivered Since all approaches are not aimed at the same type of printer inpO2 is available in different editions and optional modules see section 2 Options can be quickly unlocked through the license without reinstalling another application New Optimization Module inpO2 v 3 includes an set of new functionalities for job ganging and sheet usage Optimization The automatic layout calculation is based on product formats and quantities and it supports flat and folded works in same press run Layout Manager oro Press Runs Lle
27. play PDF low res thumbnails on the light table When working in centimeters the sheet size is rounded and incorrect in Acrobat status bar defect ID 1398771 The Multiple Document Interface MDI option that creates a new Acrobat window for each document may cause serious display problems after opening and closing inpO2 working files Disabling this option in Acrobat s Preferences is highly recommended Using Acrobat 8 on MacOS X 5 two dots are created before the file name extension It is recommended to check the Show All file extensions option to view the full name and prevent the extra dot this defect is fixed in Acrobat 9 Using Acrobat 8 some non PDF X documents with custom colour profiles make the application lag indefinitely when used in step amp repeat projects this defect is fixed in Acrobat 9 9 Fixes in Release 3 0 1 Installation e 3796 3877 The inpO2 installer has been modified to support MacOS X in foreign languages other than English for Acrobat 8 and 9 Light Table e 3212 3404 3715 3725 Various issues with Object Properties palette have been resolved e 3626 and 3656 The access to Presets through the Object Properties palette has been fixed and e 3811 e 3657 e 3724 e 3769 e 3655 the Preset drop list resizes correctly Sheet alignment settings are now considered for the saving of Sheet and Plate Presets 3695 3739 3748 3753 and 3799 Some labels and warning messages have been
28. rofiles New Icon for Ganging In the Layout Manager the icon for Ganging press run has been redesigned to ensure quicker recognition The icon represents a ganging with color coded pages Preset Renaming The version offers the ability to rename and overwrite all existing Presets In all Presets dialogues a new tool with a pencil icon allows for renaming items in the list If an item with the same name exists the user will have the option to overwrite the previously created item Preset Usage The version also offers easier navigation for the creation and edition of Presets through different accesses inpbO2 main menu Object Properties palette and toolbars The dialogue displays different button labels in different job situations Apply Close OK etc to clarify the action being applied Mark Sets Enhanced Mark Set dialog using inpO2 Presets look and feel The new dialogue also allows for renaming and overwriting Mark Sets Object Rotations New shortcuts for rotation 0 90 180 and 270 degrees in all objects contextual menus allow for faster positioning on the light table Snap to Guides Ruler guides can now be used to snap objects on the light table Wizard A progress bar was added to the Wizard during the project creation for more predictability Below is the complete list of enhancements and bug fixes Acrobat Integration 2250 A conflict with the Add printer marks option in Acrobat has been resolved 3698 All inpO2 units are now
29. this option in Acrobat s Preferences is highly recommended License Activation inpO2 Network See the nstalling inpO2 Network booklet provided with the HASP HL Net USB key for all instructions regarding the activation of your multiple license package About inpO2 DEMO inpO2 is a dongle protected application Effective with release 3 0 2 a Demo mode is also available with the same installation During the 15 first days of the installation the application has the ability to run in Demo mode if no dongle is connected The Demo mode has a limited feature set no PDF output and does not allow for job production The goal of the Demo is to explore product functionalities It is NOT recommended to work on production jobs using the inpbO2 Demo mode as working files may not be compatible with the registered version that you have purchased or will purchase About inpO2 Dongle and License As soon as a dongle is connected and the product is activated the dongle license takes priority over the Demo mode The inpO2 dongle is cross platform hence it can be connected to a PC or a Macintosh computer The USB dongle needs to be connected to your computer and its red light must be on meaning it is active and installed properly The inpO2 dongle driver is installed automatically upon installing inpO2 If the inpbO2 dongle is not connected to a USB port on your computer when you start Adobe Acrobat the plug in will be disabled and the inpbO
30. tion of managed layouts by manually adding product parts in empty areas or the sheet The user can add product parts one by one or fill the available space at once in any row or column direction Product parts can be moved individually on the sheet The Step amp Repeat tool is fully integrated with the Layout Manager and manual changes are reflected in press run statistics Pages x Options 7 q a 4 By el Mian i Eg Zz f a A a 1 4 New Planning Module for Bound Jobs The optional Planning Module is also hosted by the Layout Manager dialogue and thus benefits from the same features as the Optimization Module while offering additional functionalities for bound jobs The Planning Module allows for the creation of paginated product parts from scratch based on folding presets and other print production intents Paper Presses and Finishing Methods No initial template is needed The page trim and bleed are detected directly from the PDF files or can be set manually to override values if PDF documents are not available Marks are added at once using predefined Mark Sets Once presets are defined for existing printing equipments the user simply selects for each press run a combination among production possibilities based on job specifications and equipment usage Last minute changes can be done quickly to route a job part to another press and the layout is automatically recalculated b
31. ue feature acts as a preflight tool for the layout creation Any anomaly that is detected on the layout will immediately display an error or a warning Green lights reassure the operator that the layout can be safely outputted Checkpoints are embedded within the Layout Manager where the operator experiments different layouts by changing production components Warnings include for example equipment or paper incompatibility high percentage of waste paper etc Checkpoints are also available as a floating palette in inpO2 to give the operator more confidence when editing layouts on the Light Table Warnings include overlapping objects missing pages in the run list etc Errors are displayed first then warnings then other validated checkpoints Details are available for errors and warnings Layout Checkpoints X Mark position vs Page trim or bleed 2 error s 0 warning s J RegisterMark at 6 90 in 25 13 in on Sheet IF overlaps a page tim J RegisterMark at 6 90 in 25 13 in on Sheet 18 overlaps a page tim A Layout page count vs Target 0 error s 1 warning s A Layout has 2 page s from Product Part which does not fit the targeted 0 pa S Mark position vs Sheet or plate af Printable area S Documents af Page bleed vs Gutter Margin S Page position vs Other page trim A Run list page count vs Target at Dynagram inpO2 Release Notes v 3 0 3 Page 5 of 20 1 7 1 8 New Presets inpO2 allows for easy on th
Download Pdf Manuals
Related Search