GSM pager for vehicles ZEUS v1
Contents
1. Therefore in the case of theft when the main power supply of the vehicle is disconnected the system ZEUS will operate for a shorter period We recommend replacing the backup battery of the system ZEUS at least every 3 years The replacement is done by disconnecting battery connector AKU and connecting the new battery 4 3 Technical support Indication Possible reason LED indicator is off or not blinking no external power supply circuit not properly connected blown fuse no network signal Indicator blinking several times per SIM card is not inserted second PIN code hasn t been disabled SIM card not active System does not send any SMS SIM card account depleted messages incorrect SIM central number 14 no network signal user number is not programmed in user list Received SMS message Incorrect incorrect syntax Format extra space symbol left in SMS message No sound neprijungtas mikrofonas neteisingai prijungtas mikrofonas No sound while listening to remote micropone not connected microphone Microphone connection incorrect If your problem could not be fixed by the self guide above please contact your distributor or ELDES tech support by email support eldes It More up to date information about your device and other products can be found at the manufacturer s website www eldes It 4 4 Shortlist of essential functions Call the system ZEU2. fuse cannot be replaced by the user and the replacement fuses have to be exactly the same as indicated by the manufacturer gt WARNING in order to avoid fire or explosion hazards the system must be used only with approved back up battery Special care must be taken when connecting positive and negative battery terminals Limited Liability The buyer must agree that the system will reduce the risk of theft burglary or other dangers but does not guarantee against such events ELDES UAB will not take any responsibility regarding personal property or revenue loss while using the system ELDES UAB responsibility according to local laws does not exceed value of the purchased system 2 ELDES UAB is not affiliated with GSM operators providing cellular services therefore is not responsible for the quality of cellular services Manufacturer Warranty The system carries a 24 month warranty by the manufacturer ELDES UAB Warranty period starts from the day the system has been purchased by the end user The war ranty is valid only if the system has been used as intended following all guidelines listed in the manual and within specified operating conditions Receipt with purchase date must be kept as a proof The warranty is voided if the system has been exposed to mechanical impacts chemicals high humidity fluids corrosive and hazardous environment or other force majeure factors Copyright ELDES UAB 20
3. often connected to the doors bonnet switch or shock microwave or ultrasound sensor output which when triggered produce low level High level positive input Z1 is most often connected to siren wire if the latter is commuted via plus or to the ignition connector 1 6 System Installation Main vehicle battery must be disconnected before any installation or tuning work starts Do not install the system to spinning or moving parts of the vehicle The device and its Fan backup battery can be installed only inside the vehicle to the units that do not heat up or heat up very gently When wiring the leads from the vehicle engine compartment to the interior use rubber insulators Twist the wires and swirl them using insulating tape 1 Remove device cover and insert SIM card in the slot SIM card pin request has to be deactivated prior inserting it in the device PIN code request can be turned off inserting SIM card in a mobile phone and choosing the appropriate command The card must be clean of old SMS messages 2 Connect the circuit according to Fig No2 4 wires are sufficient for a minimal installation 1 12V 2 GND 3 Alarm system siren wire can be connected to any of the zones Z1 Z3 depending on whether security system commutates high or low level to the siren 4 The commutated output of the installed alarm system most often it is used to connect starter ignition blocking relay is connected to security arming wire
4. 09 All rights reserved It is not allowed to copy and distribute information in this document or pass to a third party without advanced written authorization by ELDES UAB ELSDES UAB reserves the right to update or modify this document and or related products without a warning Hereby ELDES UAB declares that this GSM System ZEUS is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC The declaration of conformity may be consulted at www eldes It ce C Package Content t System ZEUS gt ei nin 1pcs 2 Microphone I pcs 3 ZEUS users Manual 1pcs 4 Main connector with fuse holder 1pcs 5 Back up Datel Vinci cccscsasnnsnnnnancatweinenacalesanann 1pcs About User Manual This document describes system ZEUS installation and operation It is very important to read User Manual before start using the system A quick start guide is located in first two chapters Chapter 3 and 4 describe additional system capabilities CONTENT 1 General Information po saris inc ise SEE SETT SEEST tik SE SYES SEE SEERE eas IN RNS ESSENS SEE RE NRN 1 2 Operation Description sas riepa SEEREN ED ENE satan ddmd 1 3 Technical Specifications 1 4 Connector Functionality aoe 1 5 Connection Circuit EEE EE 1 6 System Installations Asea AES RENE tekket ENES pda EO karta k r 2 System Pre operation and the Main Control Commands 2 1 Verification of SMS Central Nu
5. ON2 or ON1 depending on whether the alarm system commutates high or low level If the vehicle does not have security system installed or if you want to use ZEUS as an additional system operating independently connect any of the hidden switches Ji or J2 to ON1 ON2 3 Insert microphone pin in the slot Please note the the position of the connector key The key must be on top Place device cover and screw its bolts Connect backup battery and vehicle battery The system has to start in less than a minute LED indicator should blink every five seconds informing about the connection to GSM network If the indicator is blinking very frequently i e several times per second it is possible that SIM card is inserted incorrectly or PIN code request is not turned off On 2 System pre operation and essential control commands VERY IMPORTANT Underscore symbol _ in this manual is used to represent space When writing SMS messages every underscore symbol should be replaced by single space symbol XXXX means password Don t leave any space at the beginning and the end of the message 2 1 Checking SMS central number SMS central number can be checked as long as factory default password is not changed SMS central number is stored in SIM card therefore if ZEUS SIM card was previously used in a mobile phone and SMS messages were successfully sent out received SMS central number does not need to be chang
6. S If the call was rejected immediately or after one ring signal the system is To find out if you turned on disarmed vehicle security system If the call carries on and you hear more than one ring signal the system is armed To find out system status Send SMS message XXXX_INFO To find out programmed user Send SMS message numbers XXXX_HELPNR To find out zone names ant Send SMS message settings XXXX_STATUS 15 Made in Lithuania www eldes It 16
7. US is a micro processor device used to remotely observe and control cars motorbikes and other vehicles through GSM network Examples of system usage Informing the user by an SMS message or phone call about the engagement of the car security system Your security system detectors will always be adjusted correctly and your car will never disturb you or your neighbours unnecessarily Vehicle search services through www locator lt Informing the user about low battery Listening to what is going on inside the car through a remote microphone A possibility to check over the mobile phone if you have not forgotten turning on the security system 1 2 Operation Description Informational system ZEUS works over GSM network It is not an alarm system it is an accessory to one However the device can be used independently without any security system This is described in section 1 5 If vehicle siren shock sensor capacity sensor or any other sensor depending on the installation is triggered ZEUS systems sends SMS message and calls the pre programmed numbers until the call is answered or one of the two users presses rejection key or the call is terminated by mobile network operator If you answer the call the microphone will activate and you will be able to listen to what is happening inside the vehicle After hanging up the phone the system gets back to the previous status SMS message with the name of the triggered input zone is sent until f
8. cturer default password is four zeros 0000 which is necessary to change Manufacturer default password can be changed by sending the following SMS message to ZEUS system 0000 PSW XXXX To replace your password send the following SMS message YYYY PSW XXXX XXXX is any four digit number except four zeros Non numerical characters like dots colons spaces are not allowed YYYY is the old system password If you forgot the password default manufacturer password can be restored see chapter 4 1 for more details 2 3 Administrator Numbers The system ZEUS allows to preprogram up to five different mobile numbers which will have access to and control the system NR1 is mandatory while others can be skipped All numbers must be entered starting with international country code e g national code for Lithuania is 370 UK 44 The plus sign is not necessary Numbers without the international code are not allowed 2 3 1 Saving or Changing Administrator Numbers Send SMS message with the following text XXXX NR1 37011111111 NR2 37011111111 Ones should be replaced with administrator numbers Numbers don t have to be entered in sequential order right away E g use can enter first number by sending the following SMS message XXXX NR1 37011111111 Numbers can be changed same way as described above New number will overwrite old one therefore no erasing is necessary 2 3 2 Verification of A
9. d upon answering the call user can listen to any sounds in the building The phone call must be answered within 20 seconds otherwise the system will stop trying and return to previous state 3 4 Blocking unknown incoming numbers By default ESIM262 can be controlled from any of the pre programmed numbers NRiand NR5 But user can access the system and control parameters from any number as long as password is know To enable this feature send SMS message XXXX_STR ON E g 0000 STR ON To disable this feature send SMS message XXXX_STR OFF 13 3 5 Notification about Discharged Vehicle Battery When vehicle battery is low the system sends SMS message notifying that the battery of the vehicle is running low This message is delivered when ius baigia iSsikrauti This message is delivered when vehicle battery voltage is 11 volts for 40 seconds and longer To disable this feature send SMS message XXXX_M OFF To re enable this feature send SMS message XXXX_M ON 4 Appendix 4 1 Restoring Default Parameters To restore default parameters e disconnect both power supplies main and back up battery e short circuit connect connectors D1 and D2 e connect power supply for several seconds e disconnect power supply e disconnect connectors D1 and D2 4 2 Replacing back up battery Backup battery has limited number of charging discharging cycles In time the battery loses its capacity
10. dministrator Numbers To inquire the system about pre programmed administrator numbers send the following SMS message XXXX HELPNR The system will reply with all pre programmed numbers 10 2 3 3 Deletion of Administrator Numbers To erase a second administrator number send an SMS message XXXX_NR2 DEL The system will not allow erasing first number NR1 It can only be modified E g XXXX_NR2 DEL 3 Additional system capabilities Security zones and Configuring input impulse duration 3 1 3 1 1 Zone settings STATUS To find out current input names and their settings send the following SMS message XXXX_STATUS You will receive the answer e g System armed disarmed Z1 siren ON OFF T1 600 Z2 doors ON OFF T2 600 Z3 sensor ON OFF T3 600 ON means that appropriate zone is activated i e it will react in the case of alarm OFF it is deactivated Ti T2 and T3 is delay of a particular one in milliseconds i e a period until the input starts reacting to signal change E g in this case alarm will be triggered only if the voltage signal is transmitted to any of the inputs for at least 600ms 3 1 2 Renaming Zones Manufacturer initially set the following zone and controlled output names Z1 siren Z2 doors Z3 sensor The user is free to change any of these names The names cannot repeat or be identical to control commands Zone names can be changed by sending the followin
11. ed Usually SMS central number of the SIM card is already entered by the operator Call the system ZEUS from your mobile phone and wait until the system rejects the call In approximately 30 60 seconds you will receive an SMS message Please change the default password If you received this message go to step 2 2 If you did not receive the message change SMS central number Instead of calling the system you can send an SMS message to the system ZEUS with the following text TEST If the telephone account is topped up and SMS central number is correct you should soon receive a message SMS central number is correct If you received this message go to step 2 3 If you did not receive the message change SMS central number New central number can be entered by sending the following SMS message XXXX_SMS_ 370111111111 XXXX is a password The default password is four zeros 0000 Ones should be replaced with SMS central number of the provider whose SIM card is inserted in the system If you do not know SMS central number you can get it from the mobile network provider E g 0000 SMS_ 37069899992 Message should be sent to the number of SIM card which is placed into the system If all went correct the system will reply with the following message SMS central number has been successfully changed to 37011111111 2 2 Administrator Password Change All SMS commands start with a password please memorize it Manufa
12. eldes GSM pager for vehicles ZEUS v1 User manual v1 0 The WEEE Waste Electrical and Electronic Equipment marking on this product see left or its documentation indi cates that in the EU the product must not be disposed of together with household waste Safety instructions Please read and follow these safety guidelines in order to maintain safety of operators and peoplearound Pager for vehicles ZEUS further referenced as the system contains an integrated radio transceiver operating in GSM900 and GSM1800 bands e Don t use the system where it can interfere with other devices and cause any potential danger e Don t use the system in hazardous environment e Don t expose the system to high humidity chemical environment or mechanical impacts e Don t attempt to personally repair the system Any system repairs must be done only by qualifi ed safety aware personnel gt gt Mains power must be disconnected before any installation or tuning work starts The ystem installation or mainte nance must not be done during stormy conditions wn gt The system must be used only with approved back up battery to avoid fire or explosion hazards Special care must be taken connecting positive and negative battery terminals gt The device is powered by a backup battery The device is switched off by unplugging main power supply connector and disconnecting battery connector gt Fuse F1 type C1S 2 5A Blown
13. ellular provider as most users use assuring fast and reliable SMS message delivery and phone call connection 1 3 Technical Specifications Electrical and mechanical specifications Supply voltage 10 24V DC Current during call not more than 250mA Current used in standby mode not more than 40mA GSM modem frequency 900 1800Mhz Number of high level positive inputs i Number of low level negative 2 Arming with low level negative 1 input Arming with high level positive 1 input Dimensions 114x78x32mm Operating temperature range 20 55 C 30 55 C with limitations Back up Battery type Lead acid 8V 0 4 1 3Ah Main fuse 3A 1 4 Connector Functionality Fig No1 SIM CARD ANT Dife Oils GSM MODEM DEFAULT 8 PIN CONNECTOR 12345678 AKU LED Q Short explanation of the main units GSM MODEM GSM network 900 1800MHz modem SIM CARD SIM card LED Light emitting diodes indicator DEFAULT Connectors D1 and D2 for restoring default settings MIC Microphone input ANT GSM antenna 8 pin connector Main 8pin connector AKU Back up battery connector Main connector pin out No Labeling Explanation Wire color 1 n c Not connected 2 23 low level input Z3 Brown 3 2 l
14. g SMS message XXXX_Z1 NewZoneName_Z2 NewZoneName_Z3 NewZoneName The user can change all names at once several names or only one name Maximum input name length is 8 characters E g XXXX_Z2 BONNET 11 3 1 3 Enabling disabling zones USEFUL INFORMATION The zones can be enabled disabled together or separately one by one Manufacturer set all the zones activated i e in mode ON NOTE Enabling Zone Any zone can be enabled by sending the following SMS message XXXX_Z1 ON_Z2 ON_Z3 ON e g XXXX_Z2 ON Disabling Zone Any zone can be disabled by sending the following SMS message XXXX_Z1 OFF_Z2 OFF_Z3 OFF e g XXXX_Z2 OFF 3 1 4 Zone Impulse Duration Configuration The user can change impulse duration for every input zone IN1 IN3 The zone is triggered only if the impulse transmitted to the input is longer than the pre set value Factory default duration is 600ms This setting can be changed for every input or for all imputs at once by sending the following SMS message XXXX_T1 TT_T2 TT_T3 TT where TT means input reaction time in milliseconds Possible TT values are 100 30000 Measuring is every 100 E g XXXX_T3 1500 means that input IN3 will react only in the case if the impulse transmitted to it is not shorter than 1 5 seconds 3 1 5 Delay Time Configuration of the System in Secure Mode For the system ZEUS the manufacturer set 5 sec delay time after a
15. irst successful message delivery to one of the users If the system drops the call immediately after calling to the number of ZEUS system vehicle alarm system is turned off In such a case you can check if you did not forget to turn vehicle alarm system If the security system is turned on after four or five call signals ZEUS will answer the call activating the microphone You will be able to listen to what is happening inside the vehicle When vehicle battery is low the system will send SMS message informing that the battery is getting low This message is sent when vehicle battery voltage is 11 volts for 40 seconds and longer If an unknown number tries calling the system or if the system receives SMS message iwith a wrong password the system ignores this To find out the place of your vehicle you have to order the service in the website www locator lt prior inserting SIM card in system port If during the theft vehicle battery is disconnected from the car the system ZEUS is powered by a backup battery and the user receives SMS message notifying about this A fully charged 0 6Ah backup battery keeps the system operating for up to 10 hours USEFUL INFORMATION To increase system reliability it is recommended not to use prepaid SIM cards The system would fail to send any messages upon depletion of prepaid account Also it is recommended to disable call forwarding and voice mail USEFUL INFORMATION It is worth to choose the same GSM c
16. mber rnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnennnnnnnnnnnnnnnnnne 2 2 Password Change p 2 3 User Nurbersuvuveudaaduarmgsdar aure bn sk ie perle aa a EE rep tains 2 3 1 Saving or Changing Numbers ec csias verse castes ths wkeareatnbvees edna ectaaieas kne ka sausnkt 2 3 2 Verification of Saved Numbers sik 2 3 3 Deletion of Saved Numbers annnnnnnnnnnnnnnnnnnnnnnnnnnnennnenennnnnnnnnnnnnnnnnnnnnnnnnnnnen 3 Additional System Capabilities 3 1 Security zones and Configuring input impulse duration c eeeeeee 3 1 1 Zone settings STATUS saman mistenke eer iabaned tae Gomeced ees 3 1 2 Renaming Zones 3 1 3 Enabling Disabling Zones 3 1 4 Configuring input impulse duration cceeeeee eee ee 3 1 5 Delay Time Configuration of the System in Secure Mode S2 INTOSON Status SMSe e live sne 3 Remote Microphone Listening 4 Blocking Unknown Numbers aararvrvanenvrvrer amp 5 Notification about Discharged Vehicle Battery c eeeeeeeeeeeeeeeeeeeeee w Ww ww 4 Appendix 4 1 Restoring default parameterS a rrrnnnnnnnannnnnnnrnrnrenennnnnnnrnnnnenennrnsnnnnnnn 4 2 Replacing back up battery arnnanunnnrnnnnnnnnnnnnnnnnnnnnennne nn nunnnnnnnnnnnnnnner 4 3 Technical Support e EE EE hate r 4 4 Shortlist of essential functions rxrrvrrrvenvrvrvenenrnnrnenernrnevenvnnenenevernenene ONARAUWU 1 General Information 1 1 Function The system ZE
17. ow level input Z2 Blue 4 Zi high level input Z1 Orange 5 ON2 Arming with high level positive Yellow 6 ON1 Arming with low level negative Green 7 GND negative supply earth pin Black 8 12V Positive power supply input 12 24V Red 1 5 Connection Circuit Fig No2 GSM pager ZEUS Microphone Z3 Ze Z1 ON2 ON1 GND 12V 1 2 3 4 ol o J ol 5 5 el Back up lt 5 battery AKU ot sv _ gr 4 Shock sensor Vehicle Negative sed battery AKU door s switch 1 I 12V s i Negative Nago emne output To Siren positive output N P Negative v output When armed ket e r arie negative yv Equivalent vehicle alarm system circuit ON1 and ON2 inputs are equivalent they only differ in input levels It is sufficient connecting only one of them Most often they are connected to system output that is connected to the relay blocking a particular circuit in car installation when the alarm is armed If the system ZEUS is installed independent from security system or if there is no alarm system in the vehicle connect ON1 to the hidden switch J1 the other pin of which is connected to the vehicle body ground Also you can connect ON2 to the hidden switch J2 the other pin of which is connected to 12V Low level negative input Z2 and Z3 are most
18. rming security system During this period the system does not react to triggered zones If ZEUS is used as an independent security system the user has enough time to leave the vehicle after turning on the hidden switch 12 This time setting is changed by sending the following SMS message XXXX_TSEC TT where TT means the delay in milliseconds after turning on secure mode Possible TT values are 100 30000 Measuring is every 100 E g XXXX_TSEC 20000 means that after arming security system it will not react to any triggered sensor for 20 seconds 3 2 Info on Status SMS System ZEUS can be inquired at any time about its status signal strength At the same time system can be tested If SMS response message is received means system is functioning properly This is also useful for users with prepaid SIM cards It can be checked whether SIM card has enough remaining balance for sending SMS Send SMS message XXXX_INFO 3 3 Remote Microphone listening To be able to listen what is going on in vehicle can be done in 3 different ways 1 When alarm has been activated the system will ring pre programmed numbers and user can answer the call Remote microphone will be enabled for listening Ring the system If vehicle alarm system is armed the system ZEUS will answer the call after 4 5 ring signals turning on the microphone 2 By sending SMS message XXXX_MIC The system will ring the sender of former SMS an
Download Pdf Manuals
Related Search