Home

JVC BD-X200U User Guide Manual - DVDPlayer

1. CHAPTER TENPO ADJ BITRATE 8 0 Mbps DISC REMAIN 000 min TCSET EDLLOAD CFINALZE TCCANCEL EDITEND EXI il gt gt T EDL LOAD Downloaded From DvDPlayer Manual com JVC Manuals a different screen is opened or the power is turned off stored data can then be loaded by Kat selecting EDL LOAD from the REMOTE CONTROL screen and pressing the Set button e If CHAPTER CREATION from the RECORDER MENU 2 2 screen is set to AUTO it will not be possible to select EDL LOAD on the REMOTE CONTROL screen e Whenever an external edit list EDL is read or time code registration is started without performing EDL LOAD the settings will be updated accordingly As a result even if EDL LOAD is selected in such a case the previous data will not be reloaded Refer to page 68 for more details regarding the loading of external EDL Synchronous Recording Recording Playback Signals From a VCR with RS 422A continued 2 Deleting the In Point Out Point and Chapter Marks REMOTE CONT EXIT IN POINT f I l 00 00 00 00 I 00 25 00 00 E 00 40 00 00 00 00 00 00 ROL SCREEN op N MASTER OU POINT 00 10 00 00 FI him s f 2 00 15 00 00 00 30 00 00 8 00 45 00 00
2. OPERATE button and indicator e This button is used to turn on the DVD recorder and to make it ready for use When pressed a second time this button turns off the DVD recorder e The indicator s lighting condition depends on the condition of the DVD recorder and can be one of the following Lit in green The DVD recorder s power is on Lit in red The DVD recorder s power is off Flashing in red An error has occurred Notes e The OPERATE button will have no effect if pressed while the DVD recorder is in either Recording or Recording Pause mode This is also the case when performing finalizing erasing or dubbing e The DVD recorder continues to use a small amount of power even after it has been turned off using the OPERATE button If it will not be used for an extended period of time please disconnect the AC adaptor to avoid wasting electricity e Do not disconnect the DC cord or power cord when in Operate On mode as this can result in the DVD recorder being damaged e Malfunction may occur when switching to OPERATE ON while pressing a key on a connected USB keyboard Nis Disc tray The purpose of the disc tray is to hold DVDs This tray opens automatically when the OPEN CLOSE button is pressed In addition the OPEN CLOSE button can be pressed again to close the tray Notes e Do not push the disc tray as it is opening or closing e Do not place objects other than discs
3. o VIDEO OUT DV cables USB terminal VC VDV204 2 m 4P 4P from JVC VC VDV206 2 m 4P 6P from JVC Keyboard Bee LEET EEE EEE CE Ge EC E E O0 Eat Monitor Mouse e Connect the DV IN OUT terminal on the rear of your BD X200 to the DV terminal on the DV camera or VCR using a DV IEEE1394 cable One of the commercially available cables indicated above should be used for this purpose e Connect the DVD recorder s VIDEO LINE OUT and AUDIO OUT terminals to the monitor s video in and audio in terminals e A keyboard and mouse can be used as an alternative to the DVD recorder s buttons when using the REMOTE CONTROL screen If used these are to be connected to each of the USB terminals on the rear panel Setup Procedures e Insert the tape for playback into the camera or VCR Ensure that this tape contains an SMPTE time code e Insert a recordable disc into your BD X200 DV camera or VCR Enable control via DV BD X200 Set REMOTE SELECT from the REMOTE MENU screen to DV MASTER REMOTE MENU screen e When REMOTE SELECT is set to DV MASTER the REMOTE CONTROL DV MASTER screen will appear This screen is used to perform editing operations REMOTE MENY and the corresponding operations are described on pages 60 through 62 REMOTE SELECT DV MASTER REC CONTROL REM FF REW MODE OFF FF REW REMOTE CONTROL DV MASTER screen REMOTE CONTROL SCREEN DV MASTER EXIT
4. V Gi OPTION D Y C LINE SET UP SET button NETWORK MENU Screen NETWORK MENU HOST NAME IP ADDRESS SETTING IP ADDRESS SUBNET MASK DEFAULT GATEWAY bdx200 STATIC 192 168 0 2 255 255 255 0 192 168 0 254 MAC ADDRESS Setting example This value is different for each device IP ADDRESSS 192 168 100 xxx SUBNET MASK 255 255 255 000 All devices are set to the same network Parameter HOST NAME The parameter is used to enter the BD X200 s network name using a keyboard 1 Press the SET UP button to display the Setup Menu 2 Select NETWORK from the Setup Menu and then press the SET button e The NETWORK MENU screen will appear Gei Use the following parameters from the NETWORK MENU screen to make settings required for dubbing E HOST NAME Use the A and Y cursor buttons or the and arrow keys to select this parameter and then input the BD X200 s network name using the USB keyboard Names may be up to 20 characters in length E IP ADDRESS SUBNET MASK and DEFAULT GATEWAY Refer to the following table for more details regarding these parameters Select the required parameter using the A and Y cursor buttons or the t and arrow keys Select the digit to be set using the gt and lt cursor buttons or the and arrow keys Change the selected digit using the A and W cursor buttons or the t and arrow keys 4 Repeat steps
5. This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations Cet appareil num rique de la classe A respecte toutes les exigences du Reglement sur le mat riel brouilleur du Canada Downloaded From DvDPlayer Manual com JVC Manuals Thank you for purchasing this JVC BD X200 DVD Recorder Main Features e Recording of DVD R and DVD RW video mode only e Composite video YC separate and DV signals are supported as video inputs furthermore analog or DV signals are supported as audio inputs e A keyboard and mouse can be used as an alternative to front panel buttons e When the BD X200 is connected to an RS 422A compatible VCR RS 422 control can be used to carry out synchronous recording of the VCR s video and audio to a DVD e Synchronous recording of video and audio from a DV camera or video player to a DVD can also be carried out e The DV IN OUT terminal can be used to record audio and video from a non linear editor to a DVD e The title and chapter menus can be created either automatically or manually e This DVD recorder features a LAN terminal Accordingly two of these recorders can be connected using LAN CAT 5 cables to perform master to receiver dubbing Contents Introduction Overview of BD X200 Functions ssessesessssssennrrrrrrrnrnrnrnssesene Precautions for DVD Recorder Use nonnnnnnessnnenennnrnrnrnnnnnne Pre
6. DVD RECORDER D X200U INSTRUCTIONS DVD Damor TM DIGITAL R RW OPERATE OPEN CLOSE o Ole Ss d DIGITAL JVC e OPTION DV Y C LINE SET UP o EI nt 00 HU Kg S000 c E P PHONES T3 8 Thank you for purchasing this JVC product Before operating this unit please read the instructions carefully to ensue the best possible performance For Customer Use Enter below the Serial No which is located on the bottom of the unit Retain this information for future reference Model No BD X200U Serial No This instruction manual is made from 100 recycled paper LLTO060 001A Downloaded From DvDPlayer Manual com JVC Manuals IMPORTANT SAFEGUARDS Fa Or IN Gell 10 11 12 13 14 15 16 17 18 19 Read all of these instructions Save these instructions for later use All warnings on the product and in the operating instructions should be adhered to Unplug this appliance system from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning Do not use attachments not recommended by the appliance manufacturer as they may cause hazards Do not use this appliance near water for example near a bathtub washbowl kitchen sink or laundry tub in a wet basement or near a swimming pool etc Do not
7. SET button e This button is used to confirm the selection of menu items or setting values when the Setup Menu is displayed e When this button is pressed during normal screen display the counter from the DVD recorder s LCD display will switch to display of either the elapsed recording playback time or the remaining disc title time 11 Component Names amp Functions Rear Panel VIDEO LINE IN terminal BNC This terminal allows composite video signals to be input to the DVD recorder In order to select these signals for input set INPUT SELECT from the INPUT SELECT MENU screen to LINE e SETUP from the SYSTEM MENU screen should be set in accordance with whether or not this input signal is a setup signal VIDEO Y C IN terminal 4 pin This terminal allows YC separate video signals to be input to the DVD recorder In order to select these signals for input set INPUT SELECT from the INPUT SELECT MENU screen to Y C e SETUP from the SYSTEM MENU screen should be set in accordance with whether or not this input signal is a setup signal e This terminal s specification e S1 or S2 can be selected using Y C TERMINAL MODE from the RECORDER MENU 2 2 screen VIDEO LINE OUT terminal BNC This terminal is used to connect the DVD recorder to a monitor e When the DVD recorder is in Stop or Recording mode the video input signal is output on the E E
8. Downloaded From DvDPlayer Manual com JVC Manuals Synchronous Recording Recording Playback Signals From a VCR with RS 422A RS 422A control can be used to record playback signals from a VCR with an RS 422A terminal to a disc in your BD X200 It will also be possible to control that VCR using this DVD recorders REMOTE CONTROL screen Signal Connections VIDEO OUT VIDEO IN AUDIO IN AUDIO OUT VIDEO OUT __ AUDIO OUT USB terminal L m VCR with an RS 422A terminal MONITOR OUT Keyboard H CEE Bey Pees ore Sr COCO L We Mouse Monitor Monitor e Connect the RS 422A REMOTE terminal on the rear of the DVD recorder to the remote RS 422A terminal on the VCR using an RS 422A cable e Connect the DVD recorder s VIDEO LINE IN and AUDIO IN terminals to the VCR s video out and audio out terminals e Connect the DVD recorder s VIDEO LINE OUT and AUDIO OUT terminals to the monitor s video in and audio in terminals e A keyboard and mouse can be used as an alternative to the DVD recorder s buttons when using the REMOTE CONTROL screen If used these are to be connected to each of the USB terminals on the rear panel Setup Procedures e Insert the tape for playback into the VCR Ensure that this tape contains an SMPTE time code Insert a recordable disc into your BD X200 VCR Enable contro
9. FINALIZE CANCEL DISC ERASE ESS 30 Downloaded From DvDPlayer Manual com JVC Manuals Insert the DVD RW from which data is to be erased Press the SET UP bution to display the Setup Menu Use the V and A buttons to select DISC MENU and then press the SET button e The DISC MENU screen will appear Use the Y and A buttons to select DISC ERASE and then press the SET button e A list of setting values will appear Use the V and A buttons to select EXECUTE from the list and then press the SET button e The erasing of data will begin The message DISC ERASE appears and the state of progress is displayed using a progress bar e When all data has been erased the progress bar will disappear CAUTION e All of the data recorded to the disc will be erased in this process Before starting therefore confirm that no important data is stored on this disc e Under no circumstances should the power be turned off or the power cord disconnected while data is being erased Pre Recording Settings E Recorder switch settings Use the AUDIO INPUT LEVEL switch on the DVD recorder s rear panel to select the reference input level for analog audio i e 4 dB or 8 dB WiThe following screens are used to make settings relevant to recording Screen setting methods ve Page 75 e INPUT SELECT MENU screen This screen is used to select the audio and video signals to be used For more details refer to page 32
10. H CUT V H CUT AUDIO CHANNEL DV 1 2ch 1 2ch 3 4ch 1 2ch nn 34 This parameter is to be set when recording an audio signal from the DV IN OUT terminal Specifically it indicates whether the signals from channels 1 and 2 or from channels 3 and 4 are to be recorded Only available for 32 kHz 1 2ch 1 2ch Channels 1 and 2 are to be recorded 3 4ch 3 4ch Channels 3 and 4 are to be recorded BOTH INDEPENDENCE VRMODE BOTH INDE This parameter is used to select the method for adjustment of audio recording levels Specifically both channels can be adjusted while maintaining the same level or each channel can be adjusted independently BOTH Both channels are to be adjusted while maintaining the same level INDEPENDENCE Both channels are to be adjusted independently DISC IN ACTION MENU TITLE DISCIN MENU TITL This parameter is used to indicate the action to be taken when a completed i e finalized disc is inserted into this DVD recorder or another DVD player In order to be effective this setting must be made during the recording process MENU The title menu is to be displayed TITLE Playback of the main content is to begin TITLE END MENU REPEAT MENU REPT This parameter is used to indicate the action to be taken when playback of a title on a completed i e finalized disc has ended In order to be effective this setti
11. through to make all of the required settings and then press the SET button or Enter key A To return to the Setup Menu after all settings have been made select MENU from the NETWORK screen and then press the SET button or the ENTER key 5 Press the SET UP button to return to the normal screen display Description Default setting bdx200 Names may be up to 20 characters in length IP ADDRESS SETTING This parameter cannot be set and is fixed in STATIC mode IP ADDRESS Use this parameter to set the IP address Make sure however that no two devices on a single network share the same IP address 192 168 000 002 SUBNET MASK Use this parameter to set the subnet mask Connected BD X200s should have the same network setting 255 255 255 000 DEAULT GATEWAY Use this parameter to set the gateway address Connected BD X200s should have the same address Downloaded From DvDPlayer Manual com JVC Manuals 192 168 000 254 71 DVD Dubbing Dubbing DVDs Using the LAN Terminal continued Dubbing Setup Procedures Sender device Insert a finalized disc Receiver device Insert a blank DVD Procedure Use the DUBBING screen to carry out the dubbing of DVDs DUBBING screen 1 2 DUBBING DVD DVD EXECUTE 2 DVD DVD dubbing screen Sender device DVD DVD SENDER RECEIVER Searching SENDER IP ADDRESS 192 168 000 002 ABORT
12. 25 Preparation Using a Keyboard amp Mouse Menu settings the title and chapter settings and other DVD recorder settings are carried out from setting screens displayed on the TV or monitor In addition recording operations can also be carried out from similar screens Although the DVD recorder s buttons are used in setting and operation screens a keyboard and mouse can be used as an alternative E Connections Connect a USB keyboard and mouse to the two USB terminals on the back of the DVD recorder Recommended manufacturers Logitech E Procedure The following functions can be controlled using the keyboard and mouse Function Selection of menu items or setting values Front panel gt button lt button A button Y button Keyboard key key t key key A J L ee of LJ USB terminals H KE k e Move the mouse Note And then left Unless otherwise specified this user s manual click describes procedures carried out from the DVD recorder itself Confirmation of settings SET button Enter key Left click The entry of names and comments for the title and chapter menus is carried out using the keyboard Set KEYBOARD STYLE from the SYSTEM MENU screen in accordance with the keyboard s input language 26 Downloaded From DvDPlayer Manual com
13. 3 6 hi mi s f 00 20 00 00 00 35 00 00 9 00 50 00 00 TC INPUT TSE EDILOA 2 TC CANCEL C ND FINALIZE RE RC 2 LL 3 Starting the Record Process REMOTE CONTI EXIT IN POINT h m s f 1 00 00 00 00 4 00 25 00 00 00 40 00 00 00 00 00 00 ROL SCREEN op N MASTER OU POINT 00 10 00 00 FI him s f 2 00 15 00 00 00 30 00 00 8 00 45 00 00 h m s f 3 00 20 00 00 6 00 35 00 00 9 00 50 00 00 TCINPUT BITRATE TC SET EDL LOAD TC CANCEL EDIT C 8 0 Mbps DISC REMAIN 000 min FINALIZE Ca ju LC EDIT END l I a Use the cursor buttons gt lt 4 V and A to select the point to be deleted i e In Point Out Point or a chapter mark from the chapter list and then press the SET button Use the cursor buttons gt V and A to select TC CANCEL and press the SET button e The selected point e the In Point Out Point or a chapter mark from the chapter list will be deleted e Whenever a chapter mark is deleted the chapter list will be resorted Select EDIT END from the REMOTE CONTROL screen and press the SET button e VCR will begin playback by returning to the position 5 seconds before the IN POINT e The unit will start record when the VCR reaches the IN
14. E Example 1 Loading a CSV format EDL JVC CSV IN POINT 00 00 00 00 REMOTE CONTROL SCREEN _ 9PIN MASTER OUT POINT Sata DO ee EXIT AN POINT 00 00 00 00 OUT POINT 01 10 00 00 Chapter1 Chapter2 220 IES Chapter3 Chapter4 h i mi s f him s Chaser 50 00 00 00 10 00 00 2 00 20 00 00 00 40 00 00 5 00 50 00 00 CHAPTER MANUAL TC INPUT BITRATE 8 0 Mbps DISC REMAIN 000 min e Line returns at the end of each line LSE FINALIZE e Maximum of 98 chapter marks TC CANCEL EDITEND e Framing mode determined by the character in front EDL LOAD of the frame field Period Drop frames Colon Non drop frames E Example 2 Loading a Sony9100 format EDL Recorder In and Recorder Out time codes are read from the X source and Y source rows and these are then set as the In Point Out Point and chapter marks for editing Set as the In Point Set as chapter marks RECORDER IN RECORDER OUT REMOTE CONTROL SCREEN _ 9PIN MASTER EXIT AN POINT 00 00 00 00 OUT POINT 01 00 00 00 00 20 00 00 00 20 00 00 T TE 100 30 00 00 00 40 00 00 Fm CENTRE a nn D 00 10 00 00 2 00 20 00 00 3 00 30 00 00 t 00 50 00 00 00 00 00 00 40 00 00 C5 00 50 00 00 6 00 50 05 00 00 50 05 00 01 00 00 00 Set as the SE L8 LS GEN Already set Set a
15. Receiver device DVD DVD RECEIVER SET SENDER IP ADDRESS 2 A A 192 168 000 002 SET Ka 7 7 Ww RECEIVER IP ADDRESS 192 168 000 003 DVD DVD RECEIVER SET SENDER IP ADDRESS 2 A A A Css 000 002 SET K vv e RECEIVER IP ADDRESS 192 168 000 003 IP address for the sender device 72 Downloaded From DvDPlayer Manual com JVC Manuals 1 Sender and receiver devices Open the DUBBING screen on both the sender and receiver devices Press the SET UP button to display the Main Setup menu Use the A and Y buttons to select DUBBING and then press the SET button e The DUBBING screen will appear Sender and receiver devices On both the sender and receiver devices set DVD DVD from the DUBBING screen to EXECUTE and press the SET bution Sender device e Search for the receiver device es Page 73 Receiver device e A confirmation box for the sender device s IP address is displayed To end dubbing Sender device Select ABORT and press the SET button The normal screen display will return Press the SET UP button to return to the normal screen display Receiver device Set the IP address for the sender device as follows Use the on screen confirmation box to set the required IP address e The IP address of the currently registered sender device will be displayed Press the SET button to use this IP add
16. e SYSTEM MENU screen e SET UP This parameter is set when an analog video signal e composite or YC separate is being input to the DVD recorder Specifically a setting is made to reflect whether or not the input signal is a setup signal SETUP should be set to ON if it is a setup signal or to OFF if it is not e TEST SIGNAL Set this parameter to ON when the color bar output by the DVD recorder s internal signal generator is to be recorded e EDIT MENU This parameter indicates whether or not a screen for menu editing is to be displayed during title closing and finalizing ENABLE The menu editing screen is to be displayed During title closing this screen can be used to modify the chapter menu s style and thumbnails and also to insert chapter names r Page 47 During finalizing the menu editing screen allows the title menu s display style to be modified Page 53 DISABLE The menu editing screen is not to be displayed In this case the chapter menu is created using preset values as part of title closing when recording is ended e PRESET STYLE MENU screen This screen is used to select the arrangement and background style for thumbnails displayed on the tops menu This DVD recorder can store eight individual style type i e TYPE1 through TYPE8 and the most suitable type should be selected here For more details refer to page 37 e RECORDER MENU screen The RECORDER MENU screen contains two different pages of
17. recorder Do not use paint thinners or organic solvents as cleaning agents Failure to observe these precautions can result in discoloration or melting of exterior surfaces When stubborn dirt is present wipe away using a cloth soaked in a dilute neutral solvent E Always use the AC adaptor provided with this DVD recorder E Always use the power cord provided with this DVD recorder The usage of a different type of cord or a damaged cord can result in the outbreak of fire or electric shocks E The power cord or the AC adaptor supplied with this DVD recorder should not be used with any other device E Before connecting the BD X200 to other devices turn those devices off and then carry out setup procedures as described in the corresponding user s manuals Mi The DVD drive unit is an expendable part Although the service life of the DVD drive unit differs depending on the usage environment of the customer replacement every 1000 hours as a guide is recommended Page 78 TOTAL RECORDING TIME Downloaded From DvDPlayer Manual com JVC Manuals Precautions Regarding Condensation WiCondensation When cold water is poured into a glass and droplets of water form on its outer surface this moisture is referred to as condensation MiWhen condensation occurs Condensation can cause water droplets to adhere to the DVD recorder s internal lens thus making normal operation impossible WCondensation occurs e
18. Each title can be separated into a number of different chapters by inserting Chapter 2 chapter marks at the appropriate points Unique numbers are also assigned to chapters and a single title can contain up to 99 different chapters Adding chapters Chapter 3 A chapter mark is inserted automatically whenever recording is paused In addition CHAPTER CREATION from the RECORDER MENU 1 2 screen BEE can also be used to setup the automatic or manual insertion of chapter marks Chapter 4 Thumbnails e the frame at the start of recording and backgrounds are End of automatically created for the title and chapter menus using the style selected recording Title closing using PRESET STYLE Start of If EDIT MENU from the SYSTEM MENU screen is set to ENABLE before the recording start of recording it will be possible to modify the chapter menu s style and Chapter 1 thumbnails and to insert chapter names and comments whenever recording is stopped i e whenever title closing is performed Title 2 Once title closing has been carried out it will not be possible to modify the chapter menu The REC CONTROL panel can be used to perform recording operations with a keyboard and mouse REC CONTROL from the REMOTE MENU screen End of must be set to ON recording Title closing If EDIT MENU from the SYSTEM MENU screen is set to ENABLE it will be Start of possible to modify the title menu s style and to input title names when the disc recording is being finalize
19. Inserting Chapter Marks Manually or Automatically ss 40 Using a Keyboard amp Mouse to Control Recording sise 41 Finalizing for playback on this and other DVD players sise 42 BD X200 Title amp Chapter Mens speicis lemme niet iene es 43 Selecting and Changing Styles for Title amp Chapter Menus sin 44 Easymenu Freeware for Editing Menu Templates iii 46 Changing Chapter Menus THUMBNAIL EDIT screen sienne 47 Changing amp Naming Thumbnails for Chapter Menus sise 48 Changing amp Checking Chapter Menu Styles issues 50 Ending the Editing of Chapter Menus sise 52 Changing amp Checking Title Menu Styles amp Names is 53 P VINO REI 57 Fast SIOW Playback oscense arie Ge eegene eet etant des d lay uscu sai bebe Eedg giereg EEN 58 Playing the Previous or Next Chapter sise 58 Recording Playback Signals From a VCR with RS 422A ooo eecececeeeeeeeeeeeeeeeteeeeeaeeeeeeeeaeeseaeeeeeseaeseeeeseaeeseeseeeesieeseaeeeeeeee 59 Recording Playback Signals From a DV Camera or VCR ire 63 Recording Video amp Audio From a Non Linear Editor sise 64 In Out amp Chapter Points from External Edit Lists sise 68 Recording Operations Using a DV Camera Trigger sise 69 Dubbing DVDs Using the LAN Terminal iii 70 Setup Menu Configuration iii 74 Setting the Setup Mem ii iiiiiiseiiereneeeereeeeneeeeeneeenneeseneeeeneneeeennennes 75 Restoring to Default Settings sise 75 le HE EE 76 DISC MENU SGreen EE 77 INPUT SELECT MENU SCI O eet ea aeaaea a
20. Specifically it allows direct setting of the encoding bit rate i e the amount of data per second The actual setting range depends on the setting that has been made for AUDIO ENCODE LPCM 4 0 to 7 8 Mbps in 0 2 Mbps steps DOLBY DIGITAL 2 0 to 9 0 Mbps in 0 2 Mbps steps AUDIO ENCODE LPCM DOLBY DIGITAL LPCM DD This parameter is used to set the encoding format for audio data LPCM Linear PCM encoding Non compressed DOLBY DIGITAL Dolby AC3 encoding Compressed ASPECT AUTO 4 3 LETTER BOX SQUEEZE ASPECT AUTO 43 LETT SQUE The screen aspect distinction signal of recorded video is selected AUTO Aspect distinction signal is recorded according to the screen aspect ratio of the input video 4 3 Constantly records aspect distinction signal of 4 3 aspect ratio LETTER BOX Constantly records aspect distinction signal of letterbox video Content at the top and bottom of the screen is blackened out Constantly records aspect distinction signal of squeezed video Content at the left and right of the screen is compressed SQUEEZE Note Setting this item to LETTER BOX or SQUEEZE will not change the output image during recording and is reflected only in the recording to the disc This button is used to display the RECORDER MENU 2 2 screen 80 This button is used to return to the Setup Menu screen Downloaded From DvDPlayer Manual com JVC Manuals RE
21. The PRESET STYLE MENU screen can be used to modify the thumbnail and background display characteristics of each of the display styles In addition the THUMBNAIL EDIT screen and the CHAPTER MENU EDIT screen can be used to modify the display style and thumbnail images for chapter menus and also to input chapter names and comments The input of names or comments is carried out using a keyboard connected to one of the recorder s USB terminals The TITLE MENU EDIT screen can be used to modify the display style for the title menu and to enter title names MDVD dubbing can be carried out using the LAN terminal This terminal allows two BD X200 DVD recorders to be connected using a LAN cable and the recorders can then operate as master and receiver devices during the dubbing of DVDs es Page 70 MThe BD X200 can be used to play discs that it has created ie Page 57 In this way it is possible to inspect the content of discs finalized using this DVD recorder e Once a disc has been finalized it can also be played on other DVD players 4 Downloaded From DvDPlayer Manual com JVC Manuals Precautions for DVD Recorder Use i Storage amp Usage Locations The storage and usage of this DVD recorder in the following types of location should be avoided e Areas at temperatures which deviate by a significant degree above or below the permitted service temperature range i e 5 C to 35 C e Areas at humidities which deviate
22. always be used to prevent accidental disconnection SIGNAL GND terminal This terminal is used to ground signals Optional board slot cover This cover is removed to allow commercially available optional boards to be installed 13 LCD Display and On Screen Content LCD Display The following information and data is presented on the DVD recorder s LCD display Description Encoding format for audio recordings LPCM DOLBY DIGITAL Recording mode The encoding format set using AUDIO ENCODE from the RECORDER MENU 1 2 screen is displayed Playback mode The encoding format used for audio on the current disc is displayed Information relevant to the current mode Wie number Chapter number Counter e When in Recording mode the LCD display indicates the title number and chapter number currently being recorded in addition to either the elapsed title recording time or the remaining disc space The SET button can be pressed to toggle between display of the elapsed recording time and the remaining disc space in the counter area Elapsed title recording time Hour Minute Second Remaining disc space Hour Minute SET button 111 TT I LI LI I e When in Playback mode the LCD display presents the title number and chapter number currently being played in addition to either the elapsed title playback time or the remaining title playback time The SET button can be pressed to toggle between displa
23. and confirm the selection using the SET button Keyboard Select using the arrow keys gt lt and t and confirm the selection using the Enter key Mouse Left click the required button When the REMOTE CONTROL screen is being displayed the DVD recorder s FWD REV PLAY REC PAUSE MENU and TOP MENU buttons will be disabled In Point start point for editing Out Point end point for editing Set the time code hours minutes seconds frames of Set the time code hours minutes seconds frames of the position on the playback tape where recording is to the position on the playback tape where recording is to be started be stopped Chapter list TC INPUT This displays the time This field is used to input SE er Chapter TAN PONT OUO OU POINT 00 10 00 00 ume guaca forin Im marks F T Gees Point Out Point and The In Points time een m ee chapter marks from the d i ist d M S M S M S DE ee 00 00 00 00 00 15 00 00 00 20 00 00 ee k 00 25 00 00 00 30 00 00 00 35 00 00 Beier EE 00 40 00 00 00 45 00 00 00 50 00 00 DISC REMAIN can be setup CHAPTER MANUAL TC INPUT Ve This field shows an e When CHAPTER estimate of the remaining CREATION from the LICET EDL LOAD FINALIZE eee RECORDER MENU CTC CANCEL EDITEND 2 2 screen is set to TS possible to setup Th
24. or DV SLAVE Page 60 e REC CONTROL This parameter indicates whether or not the REC CONTROL panel is to be displayed constantly on screen when a recordable disc has been inserted Set this to ON when using a keyboard and or mouse 31 Settings amp Controls for Recording Selecting amp Confirming Input Signals The selection of audio and video input signals is carried out from the INPUT SELECT MENU screen as described below In addition the type of input signals that have been selected can be confirmed on the front panel Video input indicators Selecting Input Signals Stop the DVD recorder 1 Open the INPUT SELECT MENU screen Press the SET UP button to display the Setup Menu L CH SET UP button Select INPUT SELECT using the A and Y buttons and then press the SET button SET button 2 Make the required settings on the INPUT SELECT MENU screen Select the parameter to be set using the A and W buttons and then INPUT SELECT MENU screen press the SET button to display a list of possible settings Select the required setting using the A and W buttons and then press ee the SET button to adopt this setting INPUT SELECT 3 Complete the setting process To do so carry out one of the following procedures e Select MENU and press the SET button to return to the Setup Menu e Press the SET UP button to return to the normal screen display Item Description INPUT SELECT This parameter i
25. the OPEN CLOSE indicator will be lit up 2 Place the disc on the disc tray Ensure that the disc is inserted correctly into the tray s recess with the printed side facing upward e Carefully place the disc in the tray so as not to hit the front panel 3 Press the OPEN CLOSE button e The disc tray will close automatically Note When a disc is inserted information about that disc is displayed on screen Page 18 Downloaded From DvDPlayer Manual com JVC Manuals Removing a Disc E Stop the DVD recorder 1 Press the OPEN CLOSE button e The disc tray will open automatically While the disc tray is open the OPEN CLOSE indicator will be lit up f the current disc has not been finalized the message NOT FINALIZE will appear on both the monitor and LCD display 2 Remove the disc from the disc tray Be sure to wait until the disc tray has opened fully before removing the disc 3 Press the OPEN CLOSE button e The disc tray will close automatically e Notes x e If the DVD recorder is in either Recording mode or Recording Pause mode the disc tray will not open when the OPEN CLOSE button is pressed e Pressing this button also has no effect during finalizing erasing and dubbing Precautions regarding the disc tray e Do not push the disc tray as it is opening or closing e Do not place objects other than discs on the disc tray e Do not press down on the disc tray
26. 04 05 04 11 20 00 Title and chapter numbers Notes e maximum of 10 minutes will be required to complete title closing e The remaining time available for recording on a disc will be displayed on the monitor Note that this is to be used as a general guide not as an exact figure DISPLAY and REMAIN from the DISPLAY MENU screen must both be ON for this figure to be displayed e During the recording process the current title number and chapter number are displayed on the monitor DISPLAY and TITLE CHAPTER from the DISPLAY MENU screen must both be ON for these numbers to be displayed Downloaded From DvDPlayer Manual com JVC Manuals ooo L REC button PAUSE button Winzer a disc that can be recorded on 1 With the DVD recorder stopped make all of the required settings and adjust the audio recording levels Start recording This is done by pressing the REC and PLAY buttons simultaneously Pause recording This is done by pressing the PAUSE button e The DVD recorder will adopt Recording Pause mode and a chapter mark will be inserted at the current position A number of different methods can also be used for the manual or automatic insertion of chapter marks Page 40 Restart recording Press the PLAY or PAUSE button e Recording will begin once again and a new chapter will be created in the current title End recording i e close the title Press the STOP button when eit
27. JVC Manuals Setting amp Displaying the Date amp Time Use the following procedure to set the internal clock s date and time Even when the DVD recorder s power is turned off the clock s date and time settings are stored using the internal battery Note that these settings are used to write the current date and time to a disc being finalized The DISPLAY screen can be used to indicate whether or not the date and time are to be displayed on screen OPERATE e PHONES BUSY a DVD OPENICLOSE R RW a SS EELER DVD RECORDER BD X200 OPTION EN e A button TITLE CHAPTER Sagnggnggng a Lo SET UP button REV STOP PLAY mp PAUSE e d en D button EI El IQ OO SET button L Setup Menu DISC MENU INPUT SELECT SYSTEM PRESET STYLE RECORDER REMOTE DISPLAY CLOCK ADJUST DUBBING NETWORK EXIT CLOCK ADJUST MENU screen CLOCK ADJUST MENU MENU DATE TIME 04 05 04 10 00 CLOCK ADJUST MENU DATE TIME 04 05 04 12 00 CLOCK SETTING 44 2 44 v Downloaded From DvDPlayer Manual com JVC Manuals lt button Y button Setting the Date and Time Setting of the date and time is carried out using the CLOCK ADJUST MENU screen During this procedure the monitor connected to the VIDEO LINE OUT terminal is used to mon
28. NTSC 46 Downloaded From DvDPlayer Manual com JVC Manuals Changing Chapter Menus THUMBNAIL EDIT screen This DVD recorder can automatically create title and chapter menus as recording operations are started and stopped Title and chapter menus are created using the following e Title or chapter names Numbers are applied based on the recording sequence e Chapter thumbnails The frames at which chapter marks have been inserted are used as thumbnails e Title thumbnails The frames at the start of individual recordings are used as thumbnails As a result a title s thumbnail is the same as that of its first chapter e Display style Menus are created using the style set using the PRESET STYLE MENU screen Styles determine factors such as thumbnail positioning and background After chapter menus have been created in this way it will be possible to modify thumbnails and styles or to insert new names and comments In specific terms the editing of chapter menus is carried out using the THUMBNAIL EDIT screen that appears when recording of a title is ended Opening the THUMBNAIL EDIT screen SYSTEM MENU Screen E Set EDIT MENU from the SYSTEM MENU screen to ENABLE e The THUMBNAIL EDIT screen will appear automatically whenever moving to SYS TEMES Stop mode from Recording mode or Recording Pause mode SETUP OFF Note Petree OFF If EDIT MENU from the SYSTEM MENU screen is set to DISABLE the FACTORY SETTING CANCEL S a D K
29. Once finalizing has been carried out no addition recordings can be made on the disc CANCEL Finalizing is not to be carried out EXECUTE Finalizing is to be carried out It will be necessary to close all titles on a disc before it can be finalized A maximum of 20 minutes will be required to complete finalizing CANCEL EXECUTE CAN EXE This parameter indicates whether or not a DVD RW video mode is to be erased CANCEL This disc is not to be erased EXECUTE This disc is to be erased In this process all recorded data is erased from the disc and it can then be recorded to as a new disc This button is used to return to the Setup Menu screen INPUT SELECT MENU screen The following table identifies and describes the parameters that may be set using the INPUT SELECT MENU screen Top half Appearance on monitor screen Bottom half Appearance on LCD display Default setting Parameter INPUT SELECT Possible settings LINE Y C DV LINE YC DV Description This parameter is used to select the audio and video input signals LINE The composite video signal from the VIDEO LINE IN terminal and the analog audio signals from the AUDIO IN terminals are to be used Y C TheYC separate signal from the Y C IN terminal and the analog audio signals from the AUDIO IN terminals are to be used DV The digital video and audio signals from the DV IN OUT terminal are to be used Th
30. POINT Recording of video and audio from the VCR to the DVD will be carried out from the In Point to the Out Point with chapters being created as specified When playback reaches the Out Point title recording will end automatically e The VCR will automatically adopt STOP mode at this time e The DVD recorder will return to Stop mode and will end title recording W if another title is to be recorded repeat operations from the registration of the In Point and Out Point Notes process L e Editing accuracy is 5 frames If no In Point has been registered recording will begin at the current tape position However the tape must be positioned before the Out Point and all chapter marks for this to be possible f no Out Point has been registered a manual stop must be carried out to end recording Select EDIT END to end the editing e When the chapter auto create function is used chapters will be created at specific intervals Setting the Optimum Bit Rate REMOTE CONTRO EXIT IN POINT 10 00 D L SCREEN _ 9PIN MASTER 0 00 OUT POINT 00 10 00 00 Te ms 7 hems f Te ms 7 7 00 00 00 00 2100 15 00 00 00 20 00 00 4 00 25 00 00 5 00 30 00 00 6 00 35 00 00 00 40 00 00 8 00 45 00 00 9 00 50 00 00 CHAPTER MANUAL E Aller oa Mbps DISC REMAIN 000 min TC SE
31. Stop Recording and Recording Pause mode Wio open the Setup Menu press the DVD recorder s SET UP button It is not possible to open this screen using the keyboard or mouse Procedure 1 Start recording Keyboard Use the arrow keys t and to select Record from the REC CONTROL panel and then press the Enter key Mouse Move the mouse pointer to the Record button and left click while the Record button selected 2 Pause recording Keyboard Use the arrow keys t and to select Pause I from the REC CONTROL panel and then press the Enter key Mouse Move the mouse pointer to the Pause I button and left click while the Pause button is selected e The DVD recorder will adopt Recording Pause mode in addition a chapter mark and thumbnail will be inserted at the current position 3 Restart recording Keyboard Use the arrow keys and to select either Record or Pause I from the REC CONTROL panel and then press the Enter key Mouse Move the mouse pointer to the Record or Pause HE button and left click while the Record or Pause button is selected E Steps 2 and 3 can be repeated to create a single partitioned title 4 End recording i e close the title Select Stop M from the REC CONTROL panel and press the Enter key e The action of the DVD recorder following the end of recording depends on the setting of EDIT MENU from the SYSTEM MENU screen DIS
32. TITLE PATTERN 3 Use the cursor buttons gt lt 4 A and V to select the fourth pattern on the TITLE PATTERN screen and then press the SET button e The title menu s display pattern changes to No 4 and the BACK button becomes highlighted 4 With the BACK button highlighted press the SET button and return to the PRESET STYLE MENU screen Milf BACK is used to exit the TITLE PATTERN screen without the SET button being pressed for the newly selected pattern the pattern setting will not be updated BACK La a TITLE PATTERN To change the display pattern for chapter menus select CHAPTER PATTERN from the PRESET STYLE MENU screen and then proceed in the same way as described above Note gi The TITLE PATTERN screen and CHAPTER PATTERN screen show the patterns that are currently stored in your BD X200 Display pattern A combination of thumbnail characteristics e position quantity and size and the type of menu background used BACK La a J a E a E a E 45 Downloaded From DvDPlayer Manual com JVC Manuals Title amp Chapter Menu Settings Selecting and Changing Styles for Title amp Chapter Menus continued Ending Settings in the PRESET STYLE MENU Screen PRE
33. a recordable disc has been inserted this panel will be displayed whenever REC CONTROL from the REMOTE MENU screen is set to ON The REC CONTROL panel can be used to control recording operations Page 41 17 Downloaded From DvDPlayer Manual com JVC Manuals LCD Display and On Screen Content On Screen Content continued Disc Status When a disc is inserted into the DVD recorder one of the following disc status messages is displayed on the monitor screen DVD RW Disc status REC 04 05 04 TITLE 1 0 00 00 11 20 00 CHAPTER 1 0 00 00 The disc status is not displayed if DISPLAY from the DISPLAY MENU screen is set to OFF Status Description DVD R The current disc is a non finalized DVD R Approximately 3 seconds DVD RW The current disc is a non finalized DVD RW Approximately 3 seconds DVD The current disc is a finalized DVD R or DVD RW Approximately 3 seconds INVALID DISC The current disc is neither a DVD R nor DVD RW 18 Downloaded From DvDPlayer Manual com JVC Manuals Event Messages Event messages are displayed on the DVD recorder s LCD display and on the monitor when incorrect operations are attempted These messages will remain on screen for approximately 3 seconds Monitor screen TITLE FULL 04 05 04 11 20 00 Monitor message INVALID TV 000 min LCD display DOLBYDIGITAL LPCM Event messages Displayed when DISPLAY from the DISPLAY MENU sc
34. by a significant degree above or below the permitted service humidity range i e 20 to 80 RH e Areas where a large amount of dust or sand is present e Areas where the DVD recorder may come into contact with oily smoke or steam such as in kitchens or in their immediate vicinity e Areas that are unstable or where significant vibration occurs e Areas where condensation occurs readily e Areas where strong magnetic fields are generated by transformers motors or the like e Areas where transceivers mobile phones and other wireless communication devices are present e Areas that are subjected to X ray irradiation or where corrosive gases are present This precaution must be strictly observed E Handling e Ensure that this DVD recorder is placed on a flat horizontal surface for use e Do not place heavy objects such as a monitor on top of the DVD recorder e Do not insert foreign objects into the disc tray opening e Be careful not to get your fingers clamped when loading the disc to prevent injury e Do not block the fan s ventilation holes e Avoid knocking or dropping this DVD recorder e When the DVD recorder is to be moved ensure that any DVD it contains is removed in advance e f the DVD recorder is not to be used for an extended period of time please disconnect the AC adaptor to avoid wasting electricity E Cleaning the Exterior with the power off Use a soft cloth when cleaning the outside of this DVD
35. display Press the SET UP button or Select EXIT from the Setup Menu and press the SET button Restoring to Default Settings SYSTEM MENU screen SYSTEM MENU TEST SIGNAL OFF FACTORY SETTING EXECUTE KEYBOARD STYLE ENGLISH EDIT MENU ENABLE TOTAL RECORDING TIME 5 Hour 30 Min Downloaded From DvDPlayer Manual com JVC Manuals All settings from the various setup menus can be returned to the corresponding default settings by setting FACTORY SETTING from the SYSTEM MENU screen to EXECUTE and by then pressing the SET button 75 Setup Menu The following table identifies and describes the parameters that may be set using the Setup Menus Top half Appearance on monitor screen Bottom half Appearance on LCD display DISC MENU DISC MENU This button opens a menu that allows settings to be made for finalizing and other similar disc processes INPUT SELECT INPUT SEL This button opens a menu that allows input audio and video signals to be selected SYSTEM SYSTEM This button opens a menu that allows settings to be made for the DVD recorder itself PRESET STYLE PRESET This button opens a menu that allows settings to be made for title menu and chapter menu display styles RECORDER RECORDER This buttons opens a RECORDER MENU screen containing two different pages of parameters The RECORDER MENU 1 2 screen allows settings to be made for the chapter creation method and the
36. for chapter menu thumbnails may differ slightly from the exact frames at which the corresponding chapter marks were inserted Style types 37 Downloaded From DvDPlayer Manual com JVC Manuals Recording Recording Sequence Use the following sequence as a reference when performing recording e Input settings Page 32 e Video and audio quality settings ve Pages 33 34 e Navigation settings e DISC IN ACTION and TITLE END e Page 81 REC button PLAY button Start of recording t Chapter 1 FEC button Chapter 2 ve Chapter 3 PAUSE button Recording Pause PLAY button or PAUSE button Resumption of recording Chapter 4 PAUSE button Recording Pause f STOP button End of recording Processing time 30 seconds maximum Chapter menu modification possible Title closing Processing time several seconds several minutes Recording of a new title Title menu modification possible Finalizing Processing time 20 minutes maximum Playback possible Title and chapter menu modification will be possible when EDIT MENU from the SYSTEM MENU screen has been set to ENABLE Playback will not be possible until a disc has been finalized 38 Downloaded From DvDPlayer Manual com JVC Manuals Recording with the Front Panel BD X200 recording operations can be carried out in two different ways nam
37. is used to retu4rn to the Setup Menu screen Downloaded From DvDPlayer Manual com JVC Manuals PRESET STYLE MENU screen The following table identifies and describes the parameters that may be set using the PRESET STYLE MENU screen Top half Appearance on monitor screen Bottom half Appearance on LCD display Default setting Parameter Possible settings Description TYPE1 This parameter is used to select one of the eight different display styles that have TYPE2 been provided for title and chapter menus Page 44 TYPE3 TYPE4 TYPE5 TYPE6 TYPE7 TYPE8 T1 T2 T3 T4 T5 T6 T7 T8 1 to 6 This parameter is used to open the TITLE PATTERN screen That screen can then be used to select a display pattern for the title menu 1 to 6 CHAPTER 1 to 6 This parameter is used to open the CHAPTER PATTERN screen PATTERN That screen can then be used to select a display pattern for the chapter menus Mto 6 This button is used to return to the Setup Menu screen 79 Downloaded From DvDPlayer Manual com JVC Manuals Setup Menu RECORDER MENU Screen The following table identifies and describes the parameters that may be set using the RECORDER screen Top half RECORDER MENU 1 2 screen Parameter CHAPTER CREATION Possible settings MANUAL AUTO CHAPTR MANU AUTO Appearance on monitor screen Bottom half Appearance on LCD display De
38. of the disc being used will dictate the available recording options as follows Disc condition Recording operations Blank disc New content can be recorded A new title is created and recording starts from that title s first chapter but not yet finalized A disc recorded on using this DVD recorder A new title is created in the unused section of the disc and recording starts from that title s first chapter Blank disc New content can be recorded A new title is created and recording starts from that title s first chapter but not yet finalized A disc recorded on using this DVD recorder A new title is created in the unused section of the disc and recording starts from that title s first chapter erased A recorded disc from which data is to be Erase the recorded data as described below and then record new content Notes e f data has been erased from a disc using a different DVD recorder it may not be possible to record new content to it using this recorder To avoid this type of situation ensure that this DVD recorder is used to erase recorded data e New content cannot be recorded to discs that have been finalized e Regardless of whether or not finalization has been carried out it will not be possible to use this DVD recorder to record new content to a DVD R or DVD RW that has been recorded on using other devices Erasing All Data From a Disc DISC MENU screen DISC MENU
39. panel FINALIZE Downloaded From DvDPlayer Manual com JVC Manuals Synchronous Recording In Out amp Chapter Points from External Edit Lists When dubbing a tape edited using an external VCR or non linear editor to a DVD the edit list or EDL created during the editing process can be used to automatically set the In Point Out Point and chapter marks Notes gt e Loading of external edit lists is possible when CHAPTER CREATION from the RECORDER 2 2 MENU screen is set to MANUAL e The framing mode for time codes i e drop or non drop will be matched to that of the edit list e In order to be read the EDL must be of CSV or Sony9100 format e The priority sequence for loading is CSV Sony9100 internally made EDL e Chapter marks are inserted at GOP intervals e 15 frames It will not be possible to insert chapter marks that are closer together than this interval REMOTE CONTROL SCREEN_ 9PIN MASTER Procedure EXIT IN POINT 00 00 00 00 OUT POINT 00 10 00 00 1 Transfer the external edit list to your BD X200 h m s f h m s f 00 00 00 00 2 00 15 00 00 3 il 4 00 25 00 00 00 30 00 00 D 0 EE 2 Select EDL LOAD from the REMOTE CONTROL screen and press D Iesse 5 0 Mbps f bisc Reman io CRE SC the SET button l e The In Point Out Point and chapter marks are set in accordance with the EDL EDL LOAD
40. place this appliance on an unstable cart stand or table The appliance may fall causing PORTABLE CART WARNING serious injury to a child or adult and serious damage to the appliance eee Use only with a cart or stand recommended by the manufacturer or sold with the appliance Wall or shelf mounting should follow the manufacturer s instructions and should use a mounting kit e approved by the manufacturer An appliance and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination Aa to overturn SS Slots and openings in the cabinet and the back or bottom are pro vided for ventilation and to insure reliable operation of the appliance and to protect it from overheating these openings must not be blocked or covered The openings should never be blocked by placing the appliance on a bed sofa rug or other similar surface This appliance should never be placed near or over a radiator or heat register This appliance should not be placed in a built in installation such as a bookcase unless proper ventilation is provided This appliance should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supplied to your home consult your dealer or local power company For appliance designed to operate from battery power refer to the operating instructions This appliance system is equipped with a 3 wire
41. text has been printed using a commercially available label printer First create a disc using the unit before printing WThe use of non circular discs e heart or rectangular shaped warped discs and cracked discs can lead to breakage of the DVD recorder 6 Downloaded From DvDPlayer Manual com JVC Manuals E Handling Discs e Removing a disc e Placing a disc in its case ae Q e Correct method for holding a disc Z Storing Discs Your hands or fingers should not come into contact with the recording surface when holding a disc W Avoid storing discs in any of the following locations e Areas with high levels of humidity or dust or areas where mold is present e Areas exposed to direct sunlight or close to heating equipment e Vehicle interiors during summer months Mi Take care to avoid dropping or knocking discs BPlace discs in cases and stack these cases for storage MDiscs can be deformed or cracked as a result of stacking leaning or dropping when not inside a case Details Regarding Discs Discs for Recording amp Playback The following shows the discs that can be recorded to and played using this DVD recorder in addition to the corresponding display marks or logos 12 cm 4 7 GB General Version 2 0 video mode 12 cm 4 7 GB Version 1 1 or later video mode Certain characteristics and properties of DVD Rs and DVD RWs can render them unsuitable for recording or playback DVD
42. then press the Enter key e A box for inputting text will appear 3 Enter a name or comment into the text box Enter a comment to be displayed on the chapter menu screen Enter a name for the chapter TITLE INPUT menu thumbnail Names can be april up to 20 characters in length Select CANCEL and press the Enter key to close the text box without applying the name or comment that has been entered e f text cannot be entered press the CTRL key right side on the keyboard Pi Notes gt E The mark will become a backslash 4 After the required text has been entered press the Enter key e The text box will close The field previously showing the chapter number will now be highlighted showing the text that was input The text that has been input will be displayed on the chapter menu screen 5 Select BACK and then press the Enter key e The initial THUMBNAIL EDIT screen will again be displayed and the name or comment will be shown for the first chapter Note S Downloaded From DvDPlayer Manual com JVC Manuals chapter menus depend on the title If you select TEXT LOAD from the THUMBNAIL or chapter pattern that has been EH i mmm EDIT screen and then press the SET button title selected A preview allows actual saa ert Les text crea
43. this DVD screen s chapter list recorder e Chapter marks are A 4 Eject Il Pause inserted at GOP intervals Aa Fast reverse or fast reverse play P Play i e 15 frames It will not Al Frame Reverse play gt Frame advance play be possible to insert W Stop gt gt Fast forward or fast forward play chapter marks that are closer together than this interval The action to be taken by the DVD recorder in response to pressing of the gt gt or lt lt button e FF REW or SEARCH is selected using REM FF REW MODE from the REMOTE MENU screen 60 Downloaded From DvDPlayer Manual com JVC Manuals 1 Registering the In Point Out Point and Chapter Marks The following two methods can be used to register the In Point Out Point and chapter marks e Recording of time codes corresponding to tape positions e Direct entry using a keyboard Registering chapter marks In order to register chapter marks using the REMOTE CONTROL screen it will first of all be necessary to set CHAPTER CREATION from the RECORDER MENU 2 2 screen to MANUAL If this parameter is set to AUTO chapter marks will be automatically setup at specific intervals The current setting for CHAPTER CREATION is indicated in this screen s CHAPTER field Recording from tape positions REMOTE CONTROL SCREEN OPEN MASTER EXIT_ IN POINT 00 00 00 00 CIE him s h m s 00 00 00 OU
44. to move to the previous page and can be used in combination with the SET button to skip forward or back in units of ten pages Complete the preview process To do this select BACK from the CHAPTER MENU PREVIEW screen and press the SET button e The CHAPTER MENU EDIT screen will reappear Select BACK from the CHAPTER MENU EDIT screen and press the SET button to return to the THUMBNAIL EDIT screen Notes e Up to 20 seconds per page will be required to create preview displays More time may be required depending on the number of thumbnails per page e During creation of preview displays jump by selecting the button can only be made to the page being created 51 Title amp Chapter Menu Settings Ending the Editing of Chapter Menus Once all of the necessary changes and checks have been made using the THUMBNAIL EDIT screen title closing must be carried out Please ensure that title closing is performed as the last stage of chapter menu editing Even if the chapter menu is to be left unchanged title closing must be carried out to leave the THUMBNAIL EDIT screen Note that when title closing has been completed chapter menu details will be permanently set THUMBNAIL EDIT 1 Select TITLE CLOSE from the THUMBNAIL EDIT screen and press Leger the SET button Weg BEBE sce e A confirmation window will appear april DDD EEE FFF 2 If you wish to proceed with tit
45. 00 9 00 50 00 00 CHAPTER MANUAL TC INPUT BITRATE 8 0 Mbps DISC HEMAIN 000 min TE CEDLIOAD_ FINALIZE TC CANCEL DITEND CS I tg Use the arrow keys and to select the point to be registered i e the In Point or Out Point and then press the Enter key Select the TC INPUT button using the cursor keys and input a time code hours minutes seconds frames into the TC input field using the keyboard Press the Enter key e The time code will be registered for the selected point e f both IN point and OUT point are not selected the time code will be registered as a chapter point e When a time code is registered for a chapter mark the chapter list will be sorted from the smallest time code values and the newly registered point will be highlighted Note The framing mode will be matched to that used for time codes on the connected device When in the drop frame mode a value corrected automatically will be registered when inputting the frame to drop Saving amp Loading Time Code Settings Once settings have been made they can be saved in your BD X200 s internal memory Even if REMOTE CONTROL SCREEN 9PIN MASTER EXIT XIN POINT 00 00 00 00 OUT POINT 00 10 00 00 him s t h m s f 00 00 00 00 15 00 00 20 00 4 00 25 00 00 00 30 00 00 6 00 35 00 00 40 00 00 45 00 00 9 00
46. 60 C Permissible storage humidity 5 to 80 RH E AC adapter section Input AC 100 V to 240 V 50 Hz 60 Hz 1 6A MAX Output DC 19 V 6 3 A E Accessories Lee E x1 Power CONG EE x1 352 Downloaded From DvDPlayer Manual com JVC Manuals This product uses partial third party software For information concerning the software used login via FTP by inputting the following into the unit and view the readme txt file User anonymous Password None If the IP address of the unit is set to 192 168 0 2 FTP connection can be established by entering ftp 196 168 0 2 in the address bar of Internet Explorer Downloaded From DvDPlayer Manual com JVC Manuals 87 VICTOR COMPANY OF JAPAN LIMITED JVC is a registered trademark owned by VICTOR COMPANY OF JAPAN LTD JVC is a registered trademark in Japan the U S A the U K and other countries 2004 VICTOR COMPANY OF JAPAN LIMITED Downloaded From DvDPlayer Manual com JVC Manuals 4440934 GAG N00CX a4 Printed in Japan LLT0060 001A
47. 7 min 212 min LPCM 76 min 87 min 102 min 34 Downloaded From DvDPlayer Manual com JVC Manuals Adjusting of Audio Recording Levels This DVD recorder s audio recording levels can be adjusted using two different methods and AUDIO REC VOLUME MODE from the RECORDER MENU 2 2 screen indicates the method to be used In addition it is also possible to return the audio recording levels to their default settings e unity gain Note The AUDIO INPUT LEVEL switch on the DVD recorder s rear panel can be used to select the reference input level for analog audio e 4 dB or 8 dB Selecting the Adjustment Method RECORDER MENU 2 2 screen 1 Open the RECORDER MENU 2 2 screen To do this select button from the RECORDER MENU 1 2 screen and press the SET button RECORDER MENU 2 2 BACK Y C TERMINAL MODE THUMBNAIL FORM AUDIO CHANNEL DV AUDIO REC VOLUME MODE S1 NORMAL 1 2ch 1 2ch BOTH 2 Make the required setting using AUDIO REC VOLUME MODE from the RECORDER MENU 2 2 screen DISC IN ACTION MENU BOTH Audio levels are adjusted while both the CH1 CH2 TITLE END MENU are maintained at the same volume INDEPENDENCE The CH1 CH2 are adjusted separately Adjusting the Audio Recording Levels Busy e OPERATE E OPENCLOSE o DVD RECORDER BD X200 See eee ee 88 Audio level indicator STOP FWD PAUSE R
48. ABLE Recording is ended and the chapter menu is created using standard settings e the title is closed ENABLE The THUMBNAIL EDIT screen will appear This screen can be used to modify the chapter menu s display style to change the thumbnails used to input chapter names and to perform other similar functions For more details refer to page 47 WI additional recording is to be carried out repeat steps 1 through A above In such a case each subsequent recording will be stored as a new title 5 End recording and remove the disc Depending on how the disc will be used one of two different procedures is implemented at this time e if more content will be recorded to the disc using this DVD recorder Simply press the DVD recorders OPEN CLOSE button and remove the disc Do not finalize the disc before it is removed e If the disc is to be played on this DVD recorder or on a different DVD player Use FINALIZE from the REC CONTROL panel to finalize the disc before it is ejected For more details regarding finalizing refer to page 42 41 Recording Finalizing for playback on this and other DVD players Finalize a disc recorded using this DVD recorder as described below in order to ensure that it can be played on this and other DVD players In the case of DVD RWs playback will be possible on DVD players that support video mode After finalizing a disc e No additional recording will be possible e The title men
49. AN POINT 00 00 00 00 OUT POINT 00 10 00 00 him s f 00 00 00 00 00 25 00 00 00 40 00 00 CHAPTER BITRATE IC SET TC CANCEL Ca Note When pressing and holding the REC button more than 2 seconds while the DVD recorder is stopped encoded output images can be checked while the button is being held Downloaded From DvDPlayer Manual com JVC Manuals CIE him si f 00 15 00 00 00 30 00 00 8 00 45 00 00 MANUAL 8 0 Mbps DISC REMAIN EDL LOAD him s f 00 20 00 00 00 35 00 00 00 50 00 00 TC INPUT 000 min FINALIZE CIC gt IC b gt La jC 63 Synchronous Recording Recording Video amp Audio From a Non Linear Editor By connecting a non linear editor featuring a DV terminal to this DVD recorder audio and video processed using the editor can be easily recorded to a disc In this case the BD X200 will be controlled by commands from the non linear editor and these commands will be communicated via the DV terminal Signal Connections Monitor AUPI OUT CCS Rear panel VIDEO OUT Is an Sg bf e 5 a ES LL DV IN OUT terminal video audio and control signals DV cables DV terminal VC VDV204 2 m 4P 4P from JVC Ml VC VDV206 2 m 4P 6
50. AUSE REC lt EI D ba MENU MENU 6 6 ees REV button and indicator e When this button is pressed in Playback or Fast Forward Play mode the DVD recorder switches to fast reverse play If pressed again during fast reverse play the REV button toggles the speed of fast reverse between x3 and x15 e When this button is pressed in Still or Slow Forward Play mode the DVD recorder switches to slow reverse play H pressed again during slow reverse play the REV toggles the speed of slow reverse between x0 5 and x0 06 e The REV indicator is lit up during fast reverse and slow reverse play STOP button e This button has the following effect when pressed in Recording or Recording Pause mode If EDIT MENU from the SYSTEM MENU screen is set to DISABLE the DVD recorder stops recording i e it performs title closing If EDIT MENU from the SYSTEM MENU screen is set to ENABLE the DVD recorder stops recording and the THUMBNAIL EDIT screen is displayed It will then be possible to modify the chapter menu e When the STOP button is pressed in Playback mode the DVD recorder stops playback PLAY button and indicator e f this button is pressed together with the REC button while a recordable disc is inserted into the DVD recorder recording will be started e When the PLAY button is pressed in Recording Pause mode the DVD recorder restarts recording e If a finalized disc has been inserted into th
51. CORDER MENU 2 2 screen Parameter Y C TERMINAL Possible settings Description This parameter is used to set the specification for the DVD recorder s VIDEO Y C INPUT terminal in order to enable the recording of wide screen discrimination signals S1 S1 terminal mode is to be adopted A discrimination signal for normal video with a 4 3 aspect ratio and squeezed video is to be recorded S2 S2 terminal mode is to be adopted A discrimination signal for normal video with a 4 3 aspect ratio squeezed video and letterbox video is to be recorded Squeezed video 16 9 wide screen content with the left and right sides compressed for normal aspect screens Letterbox video Content with the top and bottom of the screen blackened out THUMBNAIL NORMAL V CUT H CUT V H CUT NOR VCUT HCUT V H Thumbnail creation method for chapter and title menus during wide signal recording is selected NORMAL The input signal is to be converted into thumbnails without modification If the input video has an aspect ratio of 4 3 the corresponding thumbnails are also to have this aspect ratio In this case the top and bottom of the video content is to be removed to form thumbnails In this case the left and right of the video content is to be removed to form thumbnails SQUEEZE In this case the top bottom left and right of the video content is to be removed to form thumbnails LETTER BOX V CUT
52. D RWs it is impossible to overwrite previously recorded content with new data even if the disc in question has not yet been finalized The deletion of specific sections of data is also impossible e Regardless of whether or not finalization has been carried out it will not be possible to use this DVD recorder to record new content to a DVD R or DVD RW that has been recorded using other devices E Once a disc has been finalized it can be used as a standard DVD and its recorded audio and video can be played on this and other DVD players e After finalizing a disc s titles can be selected from the top menu e Additional recording will not be possible after finalizing e Although a finalized disc may in principle be played on other DVD players certain characteristics of the disc and its recording conditions may make this impossible Playing Discs on the BD X200 The BD X200 is capable of playing any discs that it has created and finalized e The following conditions may occur when attempting to play discs recorded using other devices on this DVD recorder e Inability to play e Block type noise e mosaic e Interruptions in audio and or video e Unintentional stopping during playback e Commercially available DVD Videos and DVD ROMs cannot be used Introduction Details Regarding Discs continued DVD Data Configuration Generally speaking the content recorded on a DVD is separated int
53. EC Buttons used g A Ki d i weu BeOS DIS OO W Return from setting screens to the normal display BRecording levels can be adjusted in either Stop or Recording mode Be sure to monitor the front panel s audio level indicator as the levels are being adjusted Adjust the level so that the LED on the far right does not light Adjusting both channels together BOTH Bo raise the recording level Press the A button while holding the d or gt button to raise the audio recording levels for Channel 1 and Channel 2 simultaneously To lower the recording level Press the W button while holding the a or gt button to lower the audio recording levels for Channel 1 and Channel 2 simultaneously D WR Adjusting both channels separately INDEPENDENCE Wio adjust the Channel 1 level Press either the A or V button while holding the lt button Pressing the A button raises the recording level Pressing the W button lowers the recording level To adjust the Channel 2 level Press either the A or V button while holding the gt button Pressing the A button raises the recording level Pressing the W button lowers the recording level Returning Audio Recording Levels to Default Settings UNITY MODE BPress and hold the and buttons simultaneously to return the audio recording levels to their default settings e unity gain e Both of the audio recording levels will be fixed at the default
54. ENU from the SYSTEM MENU screen to ENABLE PRESETS TE TITLE TEXT INPUT Procedure DEET er The TITLE MENU EDIT screen will be displayed when finalizing of the disc is started Changing the Display Style TITLE MENU EDIT screen 1 Select PRESET STYLE from the TITLE MENU EDIT screen and Beem press the SET button RE e The PRESET STYLE screen will appear VE 2 To change the display PATTERN am Select TITLE PATTERN and then press the SET button For more details regarding the editing procedure refer to page 45 The TITLE PATTERN changed here is also reflected in PRESET STYLE of the SETUP MENU PRESET STYLE screen PRESET STYLE BACK TYPE 1 2 TITLE PATTERN 53 Downloaded From DvDPlayer Manual com JVC Manuals Title amp Chapter Menu Settings Changing amp Checking Title Menu Styles amp Names continued Checking the Title Menu Screen TITLE MENU EDIT screen 1 Select TITLE MENU PREVIEW from the TITLE MENU EDIT screen TITLE MENU and press the SET button CNE e The TITLE MENU EDIT screen will appear PRESET STYLE 1 NN 2 Confirm that the other pages are as required EXT e Select from the TITLE MENU PREVIEW screen and press the SET button to move to the next page Starting with the first page of the title menu the display will move forward through the pages each time is selected and the SET button is pressed e Select and pre
55. EYBOARD STYLE JAPANESE THUMBNAIL EDIT screen will not be displayed In such a case title and chapter menus are created using preset settings E THUMBNAIL EDIT screen When initially displayed the THUMBNAIL EDIT screen contains thumbnails for up to six recorded chapters in the order that they were recorded The seventh and subsequent thumbnails are displayed on the following pages This initial screen can be used to change a chapter s thumbnail or to input names and comments e Operations on this screen can be carried out using the front panel buttons a keyboard or a mouse Front panel Select using the gt A and W buttons and confirm the selection using the SET button Keyboard Select using the arrow keys and confirm the selection using the Enter key The input of names and comments is also carried out using the keyboard Mouse Left click the required item Displays the previous page Displays the next page This button is used to close a disc s titles when editing has been completed As such it should not be used until all other operations have been completed When title close processing has ended the display will return to the E E screen and subsequent editing of chapter menus will not be possible Thumbnail Chapter number Highlighted item The currently selected item is displayed in highlighted text CHAPTER MENU TEXT LOAD Displays the CHAPTER MENU EDIT screen Re
56. Editing Via the REMOTE CONTROL DV SLAVE Screen A keyboard and mouse can be used as an alternative to the DVD recorder s buttons when using the REMOTE CONTROL DV SLAVE screen Front panel Select using the cursor buttons gt V and A and confirm the selection using the SET button Keyboard Select using the arrow keys gt lt and f and confirm the selection using the Enter key Mouse Left click the required button Setting of the In Point Out Point and chapter points can only be carried out by keyboard input In Point start point for editing OUT POINT end point for editing Set the time code hours minutes seconds frames at Set the time code hours minutes seconds frames of which recording is to be started the position to stop recording Chapter list TC INPUT This displays the time This field is used to input codes of chapter REMOTE CONTROL SCREEN DV SLAVE time codes for the In marks These time EXIT AN POINT 00 00 00 00 OUT POINT 00 10 00 00 Point Out Point and codes are displayed as T chapter marks from the relative values with h i mi s f h mi s h mi s f keyboard respect to the In Point 00 00 00 00 00 15 00 00 00 20 00 00 e The In Point s time 00 25 00 00 00 30 00 00 00 35 00 00 DISC REMAIN code is registered as the first chapter point e A total of 98 chapt
57. IN terminal is output to the monitor ON The color bar is displayed Use this setting when the color bar is to be recorded FACTORY SETTING CANCEL EXECUTE FACTRY CAN EXE This parameter is used to indicate whether or not all setup menu parameters are to be returned to their default settings CANCEL Default settings are not to be restored EXECUTE Default settings are to be restored KEYBOARD STYLE ENGLISH FRENCH ITALIAN GERMAN SPANISH JAPANESE KBOARD ENG FRN ITL GER ESP JPN This parameter is set when using a USB keyboard and its purpose is to indicate the keyboard s layout or language as one of the following ENGLISH FRENCH ITALIAN GERMAN SPANISH JAPANESE Note The system must be restarted after this parameter is changed EDIT MENU ENABLE DISABLE ON OFF This parameter is used to indicate whether or not a screen for editing the title and chapter menus is to be displayed when title closing or finalizing is performed ENABLE The menu editing screen is to be displayed Upon title closing the THUMBNAIL EDIT screen will be displayed for the corresponding chapter menu Page 47 Upon finalizing the TITLE MENU EDIT screen will be displayed for the title menu es Page 53 DISABLE The menu editing screen is not to be displayed This button displays the total time for recording and erasing operations xHour xxMin 78 This button
58. IO ENCODE LPCM ASPECT AUTO RECORDER MENU 1 2 MENU CHAPTER CREATION MANUAL SET INTERVAL AUTO TOTAL CONTENTS TIME ENCODE QUALITY Mbps 44 AUDIO ENCODE LPCM Setting list Setup menu operations are carried out while monitoring the display on the monitor connected to the VIDEO LINE OUT terminal In addition setup menu content also appears on the LCD display E Stop the DVD recorder 1 Open the Setup Menu screen To do this press the SET UP button 2 Open the setup menu in which settings are to be modified Use the A and Y buttons to select the required screen Press the SET button The EXIT option can be selected to return to the normal screen display 3 Make the required settings in the setup menu Use the A and Y buttons to select the parameter to be set Press the SET button e A list of setting values will appear Use the A and Y buttons to select the required value from the list and then press the SET button e The setting value will be modified accordingly Repeat steps D through 3 until all of the required settings have been made E To return to the Setup Menu select MENU and press the SET button E To move to the next menu screen select the button at the top of the current screen and press the SET button E To return to the original menu screen select either MENU or BACK and press the SET button 4 Use either of the following methods to return to the normal screen
59. JVC authorized dealer 85 Downloaded From DvDPlayer Manual com JVC Manuals Others Specifications Recording format Disc format Recordable media Recording signals E Video Signals Line input Y C input Line output Encoding format Quantization Sampling rate E Audio Signals Line input Line output Standard level Dynamic range Recording format Quantization Sampling rate Number of channels E DV Interface 1 0 DVD Video Version 1 1 ISO9660 compatible UDF DVD R For General Version 2 0 DVD RW Version 1 1 Must conform to DVD Video Format 1 0 V p p 75 Q unbalanced Y signal 1 0 V p p 75 Q unbalanced C signal 0 286 V p p 75 Q unbalanced 1 0 V p p 75 Q unbalanced ISO IEC13818 2 MPEG 2 video 8 bit 13 5 MHz 8 dBs 10 kQ minimum unbalanced 4 dBs high impedance unbalanced 8 dBs 1 kQ minimum unbalanced 20 dBFS 85 dB LPCM DOLBY DIGITAL 16 bit 48 kHz 2 IEEE1394 E External Dimensions Unit mm 86 oo Fl Fl fl E General Network terminal RJ 45 Category5 100 BASE Tx USB terminal USB 1 1 x2 Power supply 19V DC Power consumption 31W 1 63A Weight 4 5 kg device only Dimensions 212 mm w x 352 mm d x 88 mm h not including feet and other protrusions Permissible operating temperature 5 C to 35 C Permissible operating humidity 20 to 80 RH Permissible storage temperature 20 C to
60. N NE PAS OUVRIR LE BOITER ACCUNE PIECE INTERIEURE N EST A REGLER PAR LUTILISATEUR SE REFERER A UN AGENT QUALIFIE EN CAS DE PROBLEME The lightning flash wish arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons A A The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Le symbole de l clair l int rieur d un triangle quilat ral est destin alerter l utilisateur sur la pr sence d une tension dangereuse non isol e dans le bo tier du produit Cette tension est suffisante pour provoquer l lectrocution de personnes Le point d exclamation l int rieur d un triangle quilat ral est destin alerter l utilisateur sur la pr sence d op rations d entretien importantes au sujet desquelles des renseignements se trouvent dans le manuel d instructions Ces symboles ne sont utilis s qu aux Etats Unis WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE This unit should be used with 120 V AC only CAUTION To prevent electric shocks and fire hazards DO NOT use any other power source No
61. NTENTS TIME ENCODE QUALITY Mbps AUDIO ENCODE ASPECT Video Encoding SET UP button Setting Encoding Formats W Stop the DVD recorder 1 Open the RECORDER MENU 1 2 screen Press the SET UP button to display the Setup Menu Select RECORDER using the A and Y buttons and then press the SET button SET button 2 Make the required settings on the RECORDER MENU 1 2 screen Select the parameter to be set using the A and W buttons and then press the SET button to display a list of possible settings Select the required setting using the A and W buttons and then press the SET button to adopt it MANUAL Every05Min NO USE 44 rie 3 Complete the setting process To do so carry out one of the following procedures e Select MENU and press the SET button to return to the Setup Menu e Press the SET UP button to return to the normal screen display Item Description TOTAL CONTENTS TIME If you already know the duration of the video to be recorded this parameter can be set to the corresponding time to allow your BD X200 to select the optimum encoding bit rate Make a setting in hours and minutes e f the recording time is set using this parameter ENCODE QUALITY will be set automatically and this setting may not be modified manually e f this function is not to be used set it to NO USE When this setting is made ENCODE QUALITY will be returned to its previous setting ENCODE QUALITY Mbps T
62. Out Point or a chapter mark from I REMOTE CONTROL SCREEN DV SLAVE the chapter list and then press the SET button EXIT IN POINT 00 00 00 00 OUT POINT 00 10 00 00 Use the cursor buttons D V and A to select TC CANCEL i ea 2l and press the SET button 1 A 00 00 00 00 2 00 15 00 00 00 20 00 00 e The selected point e In Point Out Point or a chapter mark 1 4 00 25 00 00 00 30 00 00 00 35 00 00 i CZ 00 40 00 0018 00 45 00 00 00 50 00 00 from the chapter list will be deleted CHAPTER MANUAL ii e Whenever a chapter mark is deleted the chapter list will be sorted CO FINALIZE D TC CANCEL 66 Downloaded From DvDPlayer Manual com JVC Manuals 3 Starting the Record Process E Use the non linear editor to control the DVD recorder e Each recording will be stored on the disc as a single title e Recording of video and audio to the DVD will be carried out from the In Point to the Out Point with chapters being automatically created as specified Notes SHS SY Je _ If no In Point has been set recording will start in response to DV commands however since time codes are set for chapter marks as relative values with respect to the In Point chapters may not be created as intended It is recommended therefore that an In Point always be specified when chapters are to be created e When the chapter auto create function is used chapters will be created at specific inter
63. P from JVC e Connect the DV IN OUT terminal on the rear of your BD X200 to the DV terminal on the non linear editor using a DV IEEE1394 cable One of the commercially available cables indicated above should be used for this purpose e Connect the DVD recorder s VIDEO LINE OUT and AUDIO OUT terminals to the monitor s video in and audio in terminals Setup Procedures e Insert a recordable disc into your BD X200 BD X200 Set REMOTE SELECT from the REMOTE MENU screen to DV SLAVE REMOTE MENU screen e When REMOTE SELECT is set to DV SLAVE the REMOTE CONTROL DV SLAVE screen will appear This screen can be used to set editing points and chapter marks Refer to page 65 for details regarding usage of the REMOTE CONTROL DV SLAVE screen REMOTE SELECT DV SLAVE REC CONTROL OFF REM FF REW MODE WE REMOTE CONTROL DV SLAVE screen OFF REMOTE CONTROL SCREEN DV SLAVE EXIT IN POINT 00 00 00 00 OUT POINT 00 10 00 00 TL him s f hi mis f 00 00 00 00 2 00 15 00 00 3 00 25 00 00 C5 00 30 00 00 6 00 40 00 00 8 00 45 00 00 9 REMOTE MENU Note TC INPUT When pressing and holding the REC ADJ JIBITRATE 8 0 Mbps DISC REMAIN 000 min button more than 2 seconds while the DVD recorder is stopped encoded output FINALIZE images can be checked while the button is being held 64 Downloaded From DvDPlayer Manual com JVC Manuals
64. R JVC Maxell TDK 1x 2x 4x Recommended manufacturers Gs JVC TDK 1x 2x DVD R amp DVD RW Details DVD R Only discs that conform with DVD R Standard 2 0 video mode can be used DVD RW Discs of Version 1 1 or later can be used Although Version 1 1 of the DVD RW Standards allows the selection of either video mode or VR mode for recording this DVD recorder performs recording in video mode only Version 1 0 of the DVD RW Standards does not support video mode recording and for this reason the corresponding discs cannot be used In terms of recording characteristics DVD R and DVD RW video mode differ as follows E DVD R e Each disc can be recorded only one Accordingly these discs are recommended for use in archiving or long term storage e Once a disc has been finalized it can also be played on other DVD players E DVD RW video mode e After viewing a disc all data can be erased and it can be used to record new content e Once a disc has been finalized it can also be played on other DVD players Downloaded From DvDPlayer Manual com JVC Manuals Finalizing When a DVD R or a DVD RW video mode has been finalized it can be played in the same way as any other DVD using a standard DVD player Page 42 E Recording to unused sections of a disc and the modification of titles or display styles can be carried out as required before a disc is finalized e Inthe case of both DVD Rs and DV
65. REMAIN ON DATE STYLE MM DD YY CLOCK ADJUST MENU Screen CLOCK ADJUST MENU MENU DATE 04 12 04 TIME 10 00 DUBBING MENU Screen DUBBING CANCEL NETWORK MENU Screen NETWORK MENU HOST NAME bdx200 IP ADDRESS SETTING STATIC IP ADDRESS 192 168 0 2 SUBNET MASK 255 255 255 0 DEFAULT GATEWAY 192 168 0 254 MAC ADDRESS 74 Downloaded From DvDPlayer Manual com JVC Manuals Setting the Setup Menu Settings made in the setup menus are stored in the BD X200 s internal memory and will be retained even when the power is turned off It is also possible to return to default settings whenever so required In addition to the buttons on the front panel a keyboard and mouse can also be used to perform operations on these menus The following section however will describe operations performed using the front panel buttons Keyboard Select using the arrow keys t and and confirm the selection using the Enter key Mouse Left click the required item 2 Busy o de mes gt R Y an Dees EI DIGITAL V OPTION DV Y C LINE SET UP SET button Setup Menu DISC MENU INPUT SELECT SYSTEM PRESET STYLE RECORDER REMOTE DISPLAY CLOCK ADJUST DUBBING NETWORK EXIT RECORDER MENU 1 2 screen RECORDER MENU 1 2 MENU CHAPTER CREATION MANUAL SET INTERVAL Every05Min TOTAL CONTENTS TIME NO USE ENCODE QUALITY Mbps 44 AUD
66. SET STYLE 1 TITLE TEXT INPUT TITLE MENU PREVIEW EXIT TITLE TEXT INPUT screen TITLE TEXT INPUT Se AAA BBB ccc DDD TEXT LOAD TITLE TEXT INPUT aoe aan pee ccc TITLE INPUT 4 august CANCEL TITLE TEXT INPUT 6 Date ees AAA BBB ccc nt august DDD Display Characters _ The characters displayed in title and chapter menus depend on the title or chapter pattern that has been selected A preview allows actual display characters to be confirmed Note that at the time of purchase display characters will be as follows PATTERN No Display characters 1 16 2 19 3 17 4 20 15 line return 5 5 16 6 KL E Downloaded From DvDPlayer Manual com JVC Manuals Use the following procedure to enter names for titles in the title menu E Names and comments ar e entered using a keyboard Set KEYBOARD STYLE from the SYSTEM MENU screen in accordance with the keyboard s input language Wi The following description assumes that all operations are carried out by keyboard 1 Select TITLE TEXT INPUT from the TITLE MENU EDIT screen and press the Enter key e The TITLE TEXT INPUT screen is displayed 2 Use the arrow keys to e The currently selected ti 3 Press the E
67. SET STYLE MENU screen E To end settings in the PRESET STYLE MENU screen BEES Select MENU and press the SET button to return to the Setup Menu E To end menu settings TITLE PATTERN 4 Either press the front panel s SET UP button or select EXIT from the Setup CHAPTER PATTERN Menu and then press the SET button Easymenu Freeware for Editing Menu Templates The freeware application Easymenu can be used to create original DVD menus on your PC Menu templates created with this application can then be transferred to your BD X200 using a network cable thus allowing you to make imaginative and creative DVDs with the minimum of effort Easymenu can be downloaded from the following web page Please refer to the software manual for details regarding usage and precautions http www jvc victor co jp english pro prodv ter D Bo De Ze S weess s sf wf zelt eer sores 6 8 gt ll il 0 0 Ne DS ee E TR IN PY ASE Dap LW Lee Re pa Create menu patterns on your PC Transfer the patterns via a network E Main Specifications Please refer to the above mentioned home page for the most up to date information OS Windows XP Properties set Thumbnail number size and position background image per page and chapter comments Thumbnail highlighting format and color navigation button design and layout Readable image files BMP and JPEG Layout size 720 x 480
68. T EDLTOAD FINALIZE EDITEND Clg gt nD al 2 ADJUST FI NALIZE 4 Ending the Record Process ADJUST can be used to set the optimum bit rate e the amount of data per second for the remaining space on a disc based on the recording time or duration between the In Point and the Out Point e DISC REMAIN displays an estimate of the available space for recording on the e BIT RATE displays the current bit rate setting To set the bit rate that best suits the remaining disc capacity select ADJUST and then press the SET button WI you intend to play the recorded disc on this DVD recorder or on another player select FINALIZE and press the SET button Once finalizing has been carried out no addition recordings can be made on the disc M To remove the recorded disc from your BD X200 press the OPEN CLOSE button on the front panel 62 Downloaded From DvDPlayer Manual com JVC Manuals Recording Playback Signals From a DV Camera or VCR DV IEEE1394 control can be used to record playback signals from a camera or VCR with a DV terminal to a disc in your BD X200 It will then be possible to control that VCR using this DVD recorders REMOTE CONTROL screen Signal Connections Monitor Rear panel AUDIO OUT VIDEO OUT DV camera or VCR Q DV terminal RA DV IN OUT terminal e 7 video audio and control signals o
69. T POINT 00 10 00 00 1 him s f 1 00 00 00 00 2 00 15 00 00 00 25 00 00 00 30 0 7 00 40 00 00 8 00 45 00 00 9 err ma Ne EDL LOAD FINALIZE 0 0 0 5 0 Use the VCR Control Panel to start playback on the VCR Press the STILL OU button and pause VCR playback at the position to be registered If necessary use frame advance and the like to set the exact position Use the cursor buttons gt V and A to select the point to be registered i e the In Point or Out Point and then press the SET button The selected point will be highlighted Use the cursor buttons gt V and A to select TC SET and press the SET button e The time code will be registered for the selected point e f both IN point and OUT point are not selected the time code will be registered as a chapter point e When a time code is registered for a chapter mark the chapter list will be sorted from the smallest time code values and the newly registered point will be highlighted Editing can only be performed when there is continuous time code up to 5 seconds from IN POINT Direct keyboard entry REMOTE CONTROL SCREEN _ 9PIN MASTER EXIT IN POINT 00 00 00 00 OUT POINT 00 10 00 00 1 TIL l him s f him s f him s f 00 00 00 00 00 15 00 00 3 00 20 00 00 00 25 00 00 5 00 30 00 00 6 00 35 00 00 00 40 00 00 8 00 45 00
70. U CHAPTER PATTERN The display pattern currently selected for chapter menus Each display pattern uses different numbers STYLE positions and sizes for thumbnails in addition to CHAPTER PATTERN different backgrounds 4 Use the cursor buttons A V gt and 4 to select one of the eight style types and display the corresponding STYLE screen 5 To use a specific style select the corresponding type number and then press the SET button This type number will then be stored by the DVD recorder Following this the screen s BACK button will be highlighted The SET button can now be pressed to return to the PRESET STYLE MENU screen Type number STYLE screen E if BACK is used to exit the STYLE screen without the SET button being pressed for the newly selected type the style setting will T not be updated TITLE PATTERN CHAPTER PATTERN r Notes gi e The STYLE settings for chapter menus can be freely modified until title closing is carried out Page 47 e The STYLE settings for the title menu can be freely modified until the DVD is finalized Page 53 e Each style can be freely modified and stored in the DVD recorder s memory In addition it is also possible to freely select and modify display patterns i e the number position and size of thumbnails in addition to the background For more details regarding modification of PRESET STYLE refer to page 43 In certain cases the frames used
71. U screen DUBBING DVD DVD EXECUTE 73 Downloaded From DvDPlayer Manual com JVC Manuals Setup Menu Setup Menu Configuration The Setup Menu screen is displayed on both the monitor and LCD display As shown below this screen is used to access the BD X200 s setup menus DISC MENU Screen DISC MENU INPUT SELECT MENU Screen FINALIZE CANCEL DISC ERASE CANCEL INPUT SELECT MENU INPUT SELECT SYSTEM MENU Screen SYSTEM MENU SETUP OFF TEST SIGNAL OFF FACTORY SETTING CANCEL KEYBOARD STYLE ENGLISH PRESET STYLE MENU Screen PRESET STYLE MENU STYLE TITLE PATTERN CHAPTER PATTERN EDIT MENU ENABLE TOTAL RECORDING TIME 5 Hour 30 Min RECORDER MENU 1 2 Screen RECORDER MENU 2 2 Screen RECORDER MENU 1 2 RECORDER MENU 2 2 FEU CHAPTER CREATION MANUAL Y C TERMINAL MODE s1 SET INTERVAL Every05Min THUMBNAIL FORM NORMAL TOTAL CONTENTS TIME NO USE AUDIO CHANNEL DV 1 2ch 1 2ch ENCODE QUALITY Mbps 44 AUDIO REC VOLUME MODE BOTH AUDIO ENCODE LPCM DISC IN ACTION MENU ASPECT AUTO TITLE END MENU Setup Top Menu DISC MENU INPUT SELECT SYSTEM PRESET STYLE RECORDER REMOTE DISPLAY CLOCK ADJUST DUBBING NETWORK EXIT REMOTE MENU Screen REMOTE MENU DISPLAY MENU Screen REMOTE SELECT 9PIN MASTER REC CONTROL OFF DISPLAY MENU REM FF REW MODE FF REW DISPLAY ON TITLE CHAPTER ON RECORDER MODE ON TIME DATE TIME DATE
72. accordingly SEARCH A forward search or reverse search command is to be output accordingly MENU 82 This button is used to return to the Setup Menu screen Downloaded From DvDPlayer Manual com JVC Manuals DISPLAY MENU screen The following table identifies and describes the parameters that may be set using the DISPLAY screen Top half Appearance on monitor screen Bottom half Appearance on LCD display Default setting Parameter Possible settings Description DISPLAY OFF This parameter is used to indicate whether or not status and alarm information is to ON be displayed on the monitor screen OFF No such data is to be displayed on screen DISPLY OFF ON Data is to be displayed on screen ON When this parameter has been set to ON the following parameters can be used to indicate which types of status information will be displayed TITLE CHAPTER OFF This parameter is used to indicate whether or not the DVD s title chapter number ON and elapsed time are to be displayed on screen during recording and playback OFF No such data is to be displayed on screen OFF ON This data is to be displayed on screen Note however that nothing will be ON displayed when OFF has been set for the DISPLAY parameter OFF This parameter is used to indicate whether or not the DVD recorder s current status ON is to be displayed on screen 4 OFF The status is not to be disp
73. ada anaa rea aa ai eae aa a aaa ia EE doom Sege geesde dat 77 SYSTEM MENU S reen 5 2 1ue ee eege 78 PRESET STYLE MENU OoOO a EE Sege 79 RECORDER MENU SGr ni 2 1 2 ee EE e 80 REMOTE MENUscr en 5 8 022 ee E eraa 82 DISPLAY MENU scr en Men EE dE AEN 83 CLOCK ADJUST MENU screen 84 DUBBING SCrOGI cs e edel Eege EES E 84 NETWORK MENU Screen ccccccecesesesesseeeeeeeeeeecececaceceecesesesesesseseseceacauacacaeaeseaeecaceeeceeeesesessssesesececseeeauaeusaeenenseaeueeeas 85 MPOUDI le Teil o RER ER PP Gevascaumstd coun aeeissenpseeds 85 e ee LL A E E sabes E E A E 86 Downloaded From DvDPlayer Manual com JVC Manuals Introduction Overview of BD X200 Functions Video and audio signals from this DVD recorder s input terminals can be recorded to DVD R or DVD RW video mode only Page 29 The types of signals that can be used are as follows Video Composite video YC separate or DV signals including audio Audio Analog audio or DV signals including video BA wide range of recording methods are supported The appropriate method is to be selected in accordance with the intended mode of use e The REC PAUSE and STOP buttons on the front panel can be used for standard operations Page 39 e Recording operations can be carried out using the REC CONTROL panel Furthermore a keyboard and mouse can also be used when recording via this panel Page 41 e The BD X200 features an RS 422A termi
74. ads title text that has been created using Specifically this screen is used to check and an external application change display styles 47 Downloaded From DvDPlayer Manual com JVC Manuals Title amp Chapter Menu Settings Changing amp Naming Thumbnails for Chapter Menus The modification of chapter menu thumbnails and the entry of names and comments are carried out as described below using the THUMBNAIL EDIT screen Changing thumbnails THUMBNAIL EDIT screen THUMBNAIL EDIT TITLECLOSE TE AAA BBB ccc 1 2 3 DDD EEE 4 5 CHAPTER MENU TEXT LOAD THUMBNAIL EDIT BACK t ee ee gi 2 Mr BBB 2 PREVIEW TITLE THUMBNAIL EDIT 3 BACK E PS BBBB 2 PREVIEW TITLE Checking thumbnails THUMBNAIL EDIT TITLECLOSE TE AAA BBBB ccc 1 z 5 DDD EEE FFF 4 5 6 CHAPTER MENU THUMBNAIL EDIT BACK E ES BBB 2 2 _ PREVIEW TITLE 3 BACK Downloaded From DvDPlayer Manual com JVC Manuals For example let s change the thumbnail for the second chapter 1 Select the second chapter and press the SET button e The thumbnail screen for this chapter will be displayed 2 Select the th
75. an be modified as required Page 45 Depending on the style used and the number of menu items title and chapter menus may extend over more than one page Notes e This DVD recorder can store a total of six different display patterns for title and chapter menus At the time of purchase your BD X200 will contain five different template files Any of the stored display patterns can be selected to change the styles applied to each of the title and chapter menus e In addition original title and chapter menus can also be created using Easy menu a freeware application for editing menu templates Page 46 BModifying Chapter Menus A chapter menu s display style and thumbnails can be edited at the end of recording e during title closing furthermore titles and comments for the chapter menu can also be input at this time EDIT MENU from the SYSTEM MENU screen must be set to ENABLE for this to be possible Page 47 BModifying the Title Menu The style used for the title menu and the text input for the title name may both be modified before finalizing is carried out EDIT MENU from the SYSTEM MENU screen must be set to ENABLE for this to be possible Page 53 Notes e Thumbnail of the title menu will be the top thumbnail of the chapter menu e Once a title is closed it will no longer be possible to modify the chapter menu e No modifications whatsoever will be possible when the disc has been finalized e When a disc is finalized i
76. asily in the following situations and the appropriate care should be taken e When the DVD recorder is moved from a cold location into a warm room e When the room containing the DVD is rapidly heated e When an air conditioner s air duct is pointing straight at the DVD recorder Bin situations where it is likely that condensation will occur remove any DVD that may be present in the BD X200 and then turn the power on As the interior heats up condensation will be less likely to occur MiCondensation is a principal cause of the inability to play discs and other similar problems In this type of situation allow the DVD recorder to remain inactive with its power on for several hours If the problem persists after this period of time has elapsed contact either the store where the BD X200 was purchased or your nearest JVC Authorized dealer Extended Periods of Inactivity Performance may deteriorate over extended periods of inactivity for this reason the power should be turned on and the DVD recorder should be operated at regular intervals Compensation for Damaged Content JVC accepts no responsibility whatsoever for damages incurred as a result of an inability to play or record audio and video content in the rare event that this DVD recorder a DVD R or a DVD RW fails to operate correctly Wit is recommended that discs containing important content be backed up at regular intervals i e on a yearly basis Al
77. button to return to the THUMBNAIL EDIT screen Entering Names and Comments for Chapter Menus THUMBNAIL EDIT Se AAA BBB ccc 7 1 2 3 DDD EEE FFF 4 5 6 CHAPTER MENU THUMBNAIL EDIT BACK Ki AAA 2 PREVIEW TEXT INPUT THUMBNAIL EDIT BACK ic Si AAA SEET 3 TITLE INPUT s 1april Cm THUMBNAIL EDIT BACK ES AAA april PREVIEW TEXT INPUT THUMBNAIL EDIT TITLE CLOSE ei e AAA BBBB ccc april DDD EEE FFF CHAPTER MENU TEXT LOAD 7 Display Characters _ The characters displayed in title and Use the following procedure to apply names to the thumbnails used in chapter menus and also to add comments to be displayed on a chapter menu screen MiNames and comments are entered using a keyboard Set KEYBOARD STYLE from the SYSTEM MENU screen in accordance with the keyboard s input language i The following description assumes that all operations are carried out by keyboard For example let s now apply a name to the first chapter 1 Use the arrow keys to select the first chapter from the THUMBNAIL EDIT screen and then press the Enter key e The thumbnail screen for this chapter will be displayed 2 Select TITLE using the arrow keys and
78. cautions for Disc Usage eeseeseeeeeeneeeeeneeeteneeeeeeneeeeeaes Details Regarding DISCS AAA Component Names amp Functions Front Panel issus dE KEE tente acesonsansetiuatoeeerens sets anse Bear PANG sisi ege EAR NEEN LCD Display and On Screen Content LCD Ru EE On Screen Content 0 2 eeceeceeeeeeeeeeeeeeeeeeeeneeeeaeeeeeeseeeseeeeeaeen Status Messages seeseeseeeseeereeeeeetetitttrettrnnsinsrensrnsenne NEE Event Messages ssssssssssrrserirnsrrrsrrnrerenssrnnnrrnnerrnnnrnnnsenne Alarm Messages A Preparation Signal Connections 00 2 eeceeeceeeceeeeeeeeeeeeeeeeneeeeaeeeeeeteaeeteneeeaeen Power Connections Turning the Power On amp Off Inserting amp REMOVING DISCS eee eeeeeeeeneeeeeeeeeeeneeeeeneeereaes Using a Keyboard amp Mouse AA Setting amp Displaying the Date amp Time 2 Downloaded From DvDPlayer Manual com JVC Manuals Trademarks amp Copyrights e Dies Dolby and the Double D symbols are trademarks of Dolby Laboratories e The copying broadcasting screening or rental of copyrighted material without the authorization of the copyright holder is prohibited by law Copyright Protection Technology This DVD recorder utilizes copyright protection technology and is protected by US patents and intellectual property as owned by Macrovision and other copyright holders The permission of Macrovision is required in order to use this copyright pro
79. cording will start at Chapter 1 e When this button is pressed during recording a new chapter will be setup within the continuous video data e f this button is pressed and held for more than 2 seconds while the DVD recorder is stopped or inserted with no disc input signal encoded decoded in MPEG will be output via the VIDEO OUT terminal on the rear panel This will continue for as long as the button is held and it allows the DVD recording quality to be confirmed Audio will be muted at this time e The REC indicator is lit up in Recording and Recording Pause modes d TOP MENU button If this button is pressed while the DVD recorder is in a playback condition the current DVD s top menu or title menu will be displayed on the monitor screen If the DVD does not contain a title menu nothing will be displayed when the TOP MENU button is pressed MENU button If this button is pressed while the DVD recorder is in a playback condition the chapter menu for the currently selected title will be displayed on the monitor screen If the DVD title does not contain a chapter menu nothing will be displayed when the MENU button is pressed SET UP button e This button can be pressed to display the Setup Menu on the monitor A wide range of different menu settings can then be made via the Setup Menu Page 74 In addition the SET UP button can be pressed again to hide the Setup Menu e f the SET UP button is pressed in Recor
80. create the title and chapter menus Specifically the frames from the start of individual recordings are used as thumbnails for the title menu In asimilar way the frames at which chapter marks have been inserted are used as thumbnails for chapter menus These thumbnails may be modified later on The title menu will become the top thumbnail of the chapter menu The term style is used to refer to a combination of thumbnail characteristics for the title and chapter menus This DVD recorder can store eight different style types and the PRESET STYLE MENU screen is used to indicate which of these types is to be used Making Settings in the PRESET STYLE MENU screen Setup Menu 1 Press the SET UP button to display the Setup Menu DISC MENU 2 Select PRESET STYLE from the Setup Menu and then press the NPUT SELECT SYSTEM SET button PRESET STYLE e The PRESET STYLE MENU screen will appear Within this screen the RECORDER STYLE parameter indicates the style type currently selected for the title and REMOTE chapter menus DISPLAY ae 3 Confirm the settings for the currently selected style NETWORK Select STYLE and then press the SET button to display the corresponding EXIT STYLE screen TITLE PATTERN The display pattern currently selected for the title menu Each display pattern uses different numbers PRESET STYLE MENU screen positions and sizes for thumbnails in addition to different backgrounds PRESET STYLE MEN
81. create the top menu The action taken by your BD X200 when a disc it has finalized is inserted or when playback of a title has ended will depend on the settings of DISC IN ACTION and TITLE END as set on the RECORDER MENU 2 2 screen during recording Playback may not proceed smoothly with discs recorded using different devices regardless of whether or not they have been finalized f BUSY 22 F OPERATE OPEN CLOSE i R RW o oar Dees DIGITAL SSSS OPTION DV Y C LINE SET UP DVD RECORDER BD X200 TITLE CHAPTER AUDIO cH oe Pee K A H g H i H ZS L gt Cursor buttons gt V and A E PHONES REV STOP PLAY FWD PAUSE REC TOP EH E MENU MENU D 0 EI UId 00 D STOP button PAUSE button SET button PLAY button 1 Insert a disc The action of the DVD recorder depends on the setting of DISC IN ACTION from the RECORDER MENU 2 2 screen The following table describes the operations to be performed in either case DISC IN ACTION setting made during recording MENU TITLE The title menu will appear Playback starts automatically from the first title 2 Select the number of the title to be played Use the gt V and A buttons to select the title number for playback 3 Press the SET button to begin playback 4 Set to Still mode This is done by pressing the PAUSE b
82. creen can be used to change the styles used for displaying title and chapter menus One of eight different types of style can be selected for each of the title and chapter menus This DVD recorder can also store a total of six different display patterns for title and chapter menus At the time of purchase your BD X200 will contain five different template files Any of the stored display patterns can be selected to change the styles applied to each of the title and chapter menus PRESET STYLE MENU screen 1 Open the PRESET STYLE MENU screen This screen allows patterns to be modified for the style indicated by the STYLE PRESET STYLE MENU parameter TITLE PATTERN Shows the pattern number for the current title menu TITLE PATTERN display style as indicated by the STYLE parameter CHAPTER PATTERN CHAPTER PATTERN Shows the pattern number for the current chapter menu display style as indicated by the STYLE parameter When the STYLE parameter s number setting is changed the patterns used for title and chapter menus in the new style will be displayed by TITLE PATTERN and CHAPTER PATTERN respectively 2 Change the display patterns for the title and chapter menus as required For example let s change the title menu s display pattern from 1 to 4 Select TITLE PATTERN from the PRESET STYLE MENU screen and press the SET button e The TITLE PATTERN screen will appear TITLE PATTERN screen TITLE PATTERN BACK a La a
83. d Keyboard Category 5 cable BEY CALE Bee EEE SEET BD X200 LAN RS 422 REMOTE Power cord included O AC Bee paws Ex Ge Ze CIE Note 1 Note 2 Note 3 Note 4 22 A oer ED CN ao Receiver device In order to use the RS 422A REMOTE terminal set REMOTE SELECT from the REMOTE MENU screen to 9PIN MASTER In order to carry out control using the DV IN OUT terminal make the appropriate selection using REMOTE SELECT from the REMOTE MENU screen One of the following DV cables should be used VC VDV204 2 m 4P 4P from JVC VC VDV206 2 m 4P 6P from JVC When connecting a secondary device directly to your BD X200 use a Category 5 cross wired Ethernet cable Downloaded From DvDPlayer Manual com JVC Manuals Power Connections Connect the AC adaptor included to the DVD recorder VIDEO AC adaptor Power cord included included AC i Connect the AC adaptor s DC cord to the DVD f recorder s DC IN terminal OPERATE MEET 2 Secure the DC cord using the DC power cord indicator clamp in order to prevent accidental disconnection Remove the screw and then the clamp 2 Insert the DC cord into the clamp and then secure the clamp to the DVD recorder cH 0101010 ch CII P PHONES 1 Ei 3 C
84. d Title 3 Chapter 2 End of recording Title closing XX Processing After Recording Page 42 If additional recording is to be If the disc is to be played on this DVD recorder or on a different DVD player performed Finalize the disc Press the OPEN CLOSE button and To do this select FINALIZE from the DISC MENU screen remove the disc When a disc has been finalized it will not be possible to record more content to it or to modify its menu styles 29 Downloaded From DvDPlayer Manual com JVC Manuals Settings amp Controls for Recording Preparing a Disc for Recording This DVD recorder is capable of recording to DVD R and DVD RW in video mode DVD R Only discs that conform with DVD R Standard 2 0 video mode can be used DVD RW Discs of Version 1 1 or later can be used Although Version 1 1 of DVD RW standards allows the selection of video mode and VR mode for recording this DVD recorder performs recording in video mode only Version 1 0 of the DVD RW standards does not support video mode recording and for this reason the corresponding discs cannot be used Min terms of recording characteristics DVD R and DVD RW video mode differ as follows DVD R Each disc can be recorded only once Erasing of data and re recording are not possible DVD RW video mode After viewing a disc all data can be erased and it can be used to record new content The condition
85. ded From DvDPlayer Manual com JVC Manuals LCD Display and On Screen Content Alarm Messages Alarm messages are displayed on the DVD recorder s LCD display and on the monitor when the recorder cannot obey a command These messages will remain on screen until the next operation is carried out Monitor screen 000 min LCD display DOLBYDIGITAL LPCM Alarm messages Displayed when DISPLAY from the REC INHIBIT DISPLAY MENU Alarm message screen is set to ON REC 04 05 04 TITLE 1 0 11 22 11 20 00 CHAPTER 1 0 11 22 LCD display message INVALID DISC INVALID DISC The current disc is not a DVD R or DVD RW NOT X200 NOT X200 A disc recorded using a different DVD recorder was inserted or played Monitor message Description REC INHIBIT REC INH e Recording was attempted using a disc on which no more data can be recorded e The current disc is a non finalized DVD RW to which no more data can be recorded COPY INHIBIT COPY INH Recording of a copy protected signal was attempted DISC FULL DISC FULL All remaining space on the disc is used up during recording CELL OVER CELL OVER The number of cells for a single title exceeded 255 This will be displayed when the recording time for a single title is exceeded as a result of setting ENCODE QUALITY to a low value i e 4 Mbps or lower recording content with little movement or other similar factors No error will be triggered when the time is
86. ding or Recording Pause mode setting data relevant to recording i e video bit rate and audio encoding format will be displayed on screen In addition the SET UP button can be pressed again to hide this information 4 button e This button is used to select menu items or setting values when the Setup Menu is displayed e If a title menu or chapter menu is displayed this button can be used to select a menu number for playback Specifically pressing of this button moves the selection position upward e The A button can be used to adjust the audio recording levels when the DVD recorder is stopped or in Recording Pause mode If AUDIO REC VOLUME MODE from the RECORDER MENU 2 2 screen is set to BOTH and this button is pressed while either the lt or gt button is being held the audio recording levels for both Channel 1 and Channel 2 will increase e If AUDIO REC VOLUME MODE from the RECORDER MENU 2 2 screen is set to INDEPENDENCE and this button is pressed while the lt button is being held the audio recording level for Channel 1 will increase Similarly if the A button is pressed while the gt button is being held the audio recording level for Channel 2 will increase V button e This button is used to select menu items or setting values when the Setup Menu is displayed e If a title menu or chapter menu is displayed this button can be used to select a menu number for playback Specifically pressing of this b
87. dingly this value should be treated as an estimate and not as an exact value DATE STYLE YY MM DD This parameter is used to select the display style for dates MM DD YY YY MM DD Dates are to be displayed in year month and day sequence DD MM YY MM DD YY Dates are to be displayed in month day and year sequence DD MM YY Dates are to be displayed in day month and year sequence DSTYLE YMD MDY DMY This button is used to return to the Setup Menu screen 83 Downloaded From DvDPlayer Manual com JVC Manuals Setup Menu CLOCK ADJUST MENU screen The following table identifies and describes the parameters that may be set using the CLOCK ADJUST MENU screen Top half Appearance on monitor screen Bottom half Appearance on LCD display Default setting Parameter Possible settings Description This parameter is used to set the date For more details regarding date and time settings refer to page 27 This parameter is used to set the time This button is used to return to the Setup Menu screen DUBBING screen The following table identifies and describes the parameters that may be set using the DUBBING screen Top half Appearance on monitor screen Bottom half Appearance on LCD display Default setting Parameter Possible settings DVD DVD CANCEL EXECUTE CAN EXE Description This parameter is to be selected
88. display REC TITLE 1 0 11 22 CHAPTER 1 0 11 22 TIME DATE 28 Downloaded From DvDPlayer Manual com JVC Manuals Displaying the Date and Time Use the DISPLAY MENU screen to indicate whether or not the date and time are to be displayed on screen and to set a display style Page 74 for details regarding setting methods DISPLAY MENU Screen Makeup E DISPLAY This parameter is used to indicate whether or not data is to be displayed on screen ON Data will be displayed on screen The following parameters can be used to indicate which data is to be displayed OFF No data is displayed on screen E TIME DATE This parameter is used to set the way in which the date and time are displayed OFF Neither date or time are displayed TIME Only the time is displayed DATE Only the date is displayed TIME DATE Both date or time are displayed M DATE STYLE This parameter is used to select the way in which the date is to be displayed YY MM DD Year month day MM DD YY Month day year DD MM YY Day month year To display date and time information on screen e Set DISPLAY to ON e Set TIME DATE to anything other than OFF Date and time information is displayed as follows Mode Displayed information Recording or Stop The value of the internal clock Playback The date and time at which the current disc was finalized Settings amp Controls for Recording DVD Recording DVD r
89. e DVD recorder pressing of this button will start playback e The PLAY indicator is lit up in Recording and Playback modes FWD button and indicator e When this button is pressed in Playback or Fast Reverse Play mode the DVD recorder switches to fast forward play If pressed again during fast forward play the FWD button toggles the speed of fast forward between x3 and x15 e When this button is pressed in Still or Slow Reverse Play mode the DVD recorder switches to slow forward play If pressed again during slow forward play the FWD toggles the speed of slow forward between x0 5 and x0 06 e The FWD indicator is lit up during fast forward and slow forward play 10 Downloaded From DvDPlayer Manual com JVC Manuals Lal DEE PAUSE button and indicator e If this button is pressed during recording the DVD recorder switches to Recording Pause mode A chapter mark is inserted at the corresponding point e f this button is pressed during playback the DVD recorder switches to Still mode and freezes playback If the PAUSE button is then pressed again in Still mode the DVD recorder will advance playback by a single field e The PAUSE indicator is lit up in Recording Pause and Still modes REC button and indicator e f this button is pressed together with the PLAY button in Stop mode recording will be started e If the current disc is blank or title closing has been carried out a new title will be created and re
90. e front panel indicator corresponding to the type of input signal selected on this screen will light up or start to flash Setting of this parameter will not be possible when REMOTE SELECT from the REMOTE MENU screen has been set to DV MASTER DV SLAVE or DV TRIGGER DV signals will be used for input at these times This button is used to return to the Setup Menu screen 77 Downloaded From DvDPlayer Manual com JVC Manuals Setup Menu SYSTEM MENU Screen The following table identifies and describes the parameters that may be set using the SYSTEM MENU screen Top half Default setting Parameter Possible settings OFF ON OFF E ON Appearance on monitor screen Bottom half Appearance on LCD display Description This parameter is used to indicate whether or not a setup signal is to be added to analog video e composite or YC separate during the recording process The actual setting depends on whether the input analog signal contains a setup signal OFF This setting should be made when the input analog signal does not contain a setup signal ON This setting should be made when the input analog signal contains a setup signal TEST SIGNAL OFF ON g OFF ON This parameter is used to indicate whether or not the color bar output by the DVD recorder s internal signal generator is to be displayed OFF The color baris not displayed and video from the VIDEO LINE
91. e to recording operations and can save these to the disc being recorded When the disc is subsequently played these title and chapter menus can be used to access specific sections of stored video and audio e When recording is stopped using the STOP button or a similar action e disc closing a title number and a thumbnail corresponding to the frame at the start of recording will be created to form part of the disc s title menu A single disc can contain up to 99 different titles e Similarly if a chapter mark is inserted during recording a chapter number and a thumbnail corresponding to the frame at the chapter mark will be created to form part of the title s chapter menu Chapter marks are used as targets for skipping during playback Each title can contain up to 99 chapters Start of recording End of recording Start of recording End of recording Title 1 Title 2 e P gt Title menu Thumbnail Thumbnail i Chapter mark Chapter mark if Chapter mark Recording Recording Thumbnail Thumbnail Thumbnail Thumbnail Thumbnail Chapter menus Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2 lt t gt lt D va D lt gt Display Styles A total of eight different display styles can be used with title and chapter menus The PRESET STYLE MENU screen can be used to select the type of style to be used in the creation of title and chapter menus In addition each of the display styles c
92. ecording is carried out using the following procedure Pre Recording Settings Preparation of the DVD R or DVD e Insert a new DVD R or DVD RW video mode or alternatively a similar disc that has RW video mode only been recorded on using the DVD recorder e f the recording on a DVD RW is to be performed once again from the beginning erase the disc s data using ERASE from the DISC MENU screen es Page 30 On screen settings Use the setting screens to select the appropriate recording signal setup the recording conditions and make other necessary settings es Page 31 Adjustment of audio recording levels Audio recording levels can be adjusted in one of two different ways es Page 35 Selection of styles for the title and The title and chapter menus are used during playback of a disc to select the section of chapter menus the disc to be viewed A total of five different display styles have been made available for these menus and these can be selected using the PRESET STYLE MENU screen In addition the DVD recorder also allows you to freely modify these display styles Page 37 Recording Operations Page 38 d Start of e The section between the start of recording using the REC and PLAY buttons recording and the end of recording using the STOP button constitutes a single recording Chapter 1 title and each title is assigned a unique number chapter mark A single disc can contain up to 99 different titles
93. ely using the buttons provided on the front panel and using the on screen REC CONTROL panel In the latter case furthermore recording operations can be performed using a keyboard and mouse The following section however will provide a description of recording using the front panel buttons On a DVD the section of video recorded between the start of recording and pressing of the STOP button to end recording is stored as a single title and a unique title number is assigned to each of these sections A single disc can contain up to 99 different titles In addition each title can be separated into a number of different chapters by inserting chapter marks at the appropriate points and each title can contain up to 99 chapters Information relating to titles and chapters is stored on a disc in the form of title and chapter menus When the disc is being played therefore the title and chapter menus can be used to access specific sections of stored video and audio LCD display OPERATE SG BUSY OPEN CLOSE EF OPEN CLOSE button DOLBY T SSSS OPTION DV Y C LINE SET UP DVD RECORDER BD X200 TITLE CHAPTER r PRONES S REV STOP PLAY FWD PAUSE REC TOP MENU MENU III E STOP button Remaining time Monitor display 000 min REC TITLE 1 0 11 22 CHAPTER 1 0 11 22
94. encoding of audio and video The RECORDER MENU 2 2 screen allows the settings required for recording to be made REMOTE REMOTE This button opens a menu that allows settings to be made for remote operations via the DVD recorder s RS 422A or DV terminal In addition this menu also allows indication of whether or not the REC CONTROL panel is to be displayed DISPLAY DISPLAY This button opens a menu that allows settings to be made for the display of status and alarm information on the TV or monitor screen CLOCK ADJUST This button opens a menu that allows setting of the internal clock s date and time This button opens a menu that allows settings to be made for DVD dubbing NETWORK This button opens a menu that allows network settings to be made for LAN terminal usage EXIT 76 This button is selected to return to the normal screen display Downloaded From DvDPlayer Manual com JVC Manuals DISC MENU Screen The following table identifies and describes the parameters that may be set using the DISC MENU screen Top half Appearance on monitor screen Bottom half Appearance on LCD display Default setting Parameter FINALIZE Possible settings CANCEL EXECUTE CAN EXE Description This parameter indicates whether or not the recorded disc is to be finalized If a disc recorded using this DVD recorder is to be played on a DVD player it must first be finalized
95. ers can be setup This field shows an estimate of the remaining space for recording on the Ge FINALIZE SE J A CREATION from the LTC CANCEL RECORDER 2 2 E MENU screen must be set to MANUAL for this to be possible This button is used to finalize the disc ADJUST TC CANCEL This button is used to remove setting values This button can be for the In Point Out Point and chapter marks pressed to determine EDL LOAD This button is used to load the most recent CHAPTER the remaining disc time edit list It can be used whenever CREATION The right hand field indicates based on the editing CHAPTER has been set to MANUAL the current setting for time and also to set a CHAPTER CREATION from suitable bit rate This the RECORDER MENU 2 2 setting is then displayed screen in the BIT RATE field e When set to MANUAL chapter marks can be registered in this screen s chapter list When set to AUTO the DVD recorder s chapter auto create function will set chapters In such a case it will not be possible to register chapters using this screen s chapter list Chapter marks are inserted at GOP intervals i e 15 frames It will not be possible to insert chapter marks that are closer together than this interval 65 Downloaded From DvDPlayer Manual com JVC Manuals Synchronous Recording Recording Video amp Audi
96. fault setting Description This parameter is used to indicate whether or not chapters are to be created automatically at set intervals while recording MANUAL Chapters are not to be created automatically Use this setting when chapters are to be set manually Chapters are to be created at set intervals during recording The SET INTERVAL parameter below is used to specify this interval AUTO SET INTERVAL Every01min Every05min Every59min INTERV 1 5 59 This parameter becomes active whenever CHAPTER CREATION has been set to AUTO It is used to set the time interval for automatic chapter creation and is set in units of minutes TOTAL CONTENTS TIME NO USE 0 01 9 59 CNTENS 000 001 959 If you already know the duration of the video to be recorded this parameter can be set to the corresponding time to allow your BD X200 to select the optimum encoding bit rate Make a setting in hours and minutes between 00 00 and 9 59 e f the recording time is set using this parameter ENCODE QUALITY will be set automatically and this setting may not be modified manually e f this function is not to be used set it to NO USE When this setting is made ENCODE QUALITY will be returned to its previous setting ENCODE QUALITY Mbps 8 0 Setting range described on right QUALITY 8 0 This parameter can be set when TOTAL CONTENTS TIME has been set to NO USE
97. for time codes on the connected device When in the drop frame mode a value corrected automatically will be registered when inputting the frame to drop TC CANCEL Saving amp Loading Time Code Settings Once settings have been made they can be saved on your BD X200 Even if a different ENT CONTROL SCREEN DVSLVE r screen is opened or the power is turned off stored data can then be loaded by selecting zE AE see EDL LOAD from the REMOTE CONTROL screen and pressing the Set button ET NT e If CHAPTER CREATION from the RECORDER MENU 2 2 screen is set to AUTO it will a eee not be possible to select EDL LOAD on the REMOTE CONTROL screen TCTNPUT z ofere Saee e Whenever an external edit list EDL is read or time code registration is started without aa performing EDL LOAD the settings will be updated accordingly As a result even if EDL LOAD is selected in such a case the previous data will not be reloaded Refer to page 68 for more details regarding the loading of external EDL EDL LOAD 2 Deleting the In Point Out Point and Chapter Marks Use the cursor buttons gt V and A to select the point to be deleted i e the In Point
98. grounding type plug a plug having a third grounding pin This plug will only fit into a grounding type power outlet This is a safety feature If you are unable to insert the plug into the outlet contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the grounding plug For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges Do not allow anything to rest on the power cord Do not locate this appliance where the cord will be abused by persons walking on it Follow all warnings and instructions marked on the appliance Do not overload wall outlets and extension cords as this can result in fire or electric shock Never push objects of any kind into this appliance through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the appliance Do not attempt to service this appliance yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel Unplug this appliance from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power cord or plug i
99. her recording or paused e The action of the DVD recorder following the end of recording depends on the setting of EDIT MENU from the SYSTEM MENU screen DISABLE Recording is ended and the chapter menu is created using preset settings i e the title is closed ENABLE The THUMBNAIL EDIT screen will appear This screen can be used to modify the chapter menu s display style to change the thumbnails used to input chapter names and to perform other similar functions For more details refer to page 47 If additional recording is to be carried out repeat steps 7 through 5 above e In such a case the subsequent recording is stored as a new title 39 Recording Recording with the Front Panel continued Note 6 End recording and remove the disc When recording is stopped or a title is Depending on how the disc will be used one of two different procedures is closed the state of progress will be implemented at this time indicated on screen using a progress bar e If more content will be recorded to the disc using this DVD recorder Simply press the OPEN CLOSE button and remove the disc Do not finalize Recording stopped Title closing the disc before it is removed e If the disc is to be played on this DVD recorder or on a different DVD REC STOP TITLE CLOSE player CO WO Finalize the disc press the OPEN CLOSE button and then remove the disc For more details regarding finalizing refer
100. his parameter can be set when TOTAL CONTENTS TIME has been set to NO USE Specifically it allows direct setting of the encoding bit rate i e the amount of data per second Large values increase the quality of the video however this also increases the overall data size Setting range The range of values that can be set depends on the audio encoding format LPCM 4 0 to 7 8 Mbps in 0 2 Mbps steps DOLBY DIGITAL 2 0 to 9 0 Mbps in 0 2 Mbps steps 33 Downloaded From DvDPlayer Manual com JVC Manuals Settings amp Controls for Recording Setting the Encoding Format for Audio amp Video continued Audio Encoding BAUDIO ENCODE This parameter is used to set the encoding format for audio data LPCM Linear PCM encoding DOLBY DIGITAL Dolby AC3 encoding Note If the SET UP button is pressed while in Recording mode the video bit rate setting and audio encoding format will be displayed on screen Press the SET UP button once again to hide this information Guide to Recording Times The time available for recording on a disc will depend on the video encoding bit rate and audio encoding format that have been set Furthermore the more titles a disc contains the less time will be available for recording Use the following table as a guide to the amount of time available for recording Encoding bit rate 6 Mbps 5 Mbps 4 Mbps 3 Mbps 2 Mbps Audio encoding format DOLBY DIGITAL 88 min 103 min 125 min 15
101. ingly e If AUDIO REC VOLUME MODE from the RECORDER MENU 2 2 screen is set to BOTH and either the A org button is pressed while this button is being held the audio recording levels for both Channel 1 and Channel 2 will be adjusted accordingly e If this button is pressed together with the button the audio recording levels will be returned to their default settings i e unity gain gt button e f a title menu or chapter menu is displayed this button can be used to select a menu number for playback Specifically pressing of this button moves the selection position to the right e This button can be pressed while the DVD recorder is playing to move playback to the start of the next chapter e The gt button can be used to adjust the audio recording levels when the DVD recorder is stopped or in Recording Pause mode e If AUDIO REC VOLUME MODE from the RECORDER MENU 2 2 screen is set to INDEPENDENCE and either the A or W button is pressed while this button is being held the audio recording level for Channel 2 will be adjusted accordingly e If AUDIO REC VOLUME MODE from the RECORDER MENU 2 2 screen is set to BOTH and either the A org button is pressed while this button is being held the audio recording levels for both Channel 1 and Channel 2 will be adjusted accordingly e If this button is pressed together with the lt button the audio recording levels will be returned to their default settings i e unity gain
102. is button is used to SE finalize the disc playback tape ADJUST TC SET This button is used to set input time codes for This button can be the In Point Out Point and chapter marks pressed to determine TC CANCEL This button is used to remove setting values CHAPTER the remaining disc time for the In Point Out Point and chapter marks The right hand field indicates based on the editing EDL LOAD This button is used to load the most recent the current setting for time and to also set a edit list It can be used whenever CREATION CHAPTER CREATION from suitable bit rate This CHAPTER has been set to MANUAL the RECORDER MENU 2 2 setting is then EDIT END This button is used to start editing screen displayed in the BIT automatically When recording has ended the e When set to MANUAL RATE field DVD recorder automatically adopts Recording chapter marks can be STOP mode If selected while editing this registered in this screen s button will end that process chapter list e When set to AUTO the DVD recorder s chapter auto create function will set VCR Control Panel chapters In such a case it The buttons provided in this panel are used to control VCR operations When a will not be possible to button is selected and confirmed the VCR will carry out the corresponding operation register chapters using this It is important to remember that these buttons do not control operation of
103. itor the setting of data E Turn on the power and ensure that the DVD recorder is stopped 1 2 Press the SET UP button to display the Setup Menu Open the CLOCK ADJUST MENU screen Use the A and Y buttons to select CLOCK ADJUST The currently selected menu item is displayed as highlighted Press the SET button to open the CLOCK ADJUST MENU screen Set the date and time as required Use the A and Y buttons to select either DATE or TIME Then press the SET button Use the gt and lt buttons to select the digit to be changed The currently selected digit is displayed as highlighted text Use the A and Y buttons to change the value of the selected digit 4 Repeat steps through to make all of the required settings and then press the SET button Note It is not possible to set the time in units of seconds After setting the minutes press the SET button in sync with a time signal After completing all of the required settings return to the Setup Menu To do this use the A or W buttons to select MENU and then press the SET button Return to the normal screen display To do this press the SET UP button or e Select EXIT from the Setup Menu and press the SET button 27 Preparation Setting amp Displaying the Date amp Time continued DISPLAY MENU screen DISPLAY MENU DISPLAY TITLE CHAPTER RECORDER MODE TIME DATE TIME DATE REMAIN ON DATE STYLE MM DD YY On screen
104. l conversion when recording a wide screen signal AUDIO CHANNEL DV This parameter is to be set when recording an audio signal from the DV IN OUT terminal Specifically it indicates whether the signals from channels 1 and 2 or from channels 3 and 4 are to be recorded AUDIO REC VOLUME MODE This parameter is used to select the method for adjustment of audio recording levels Specifically both channels can be adjusted while maintaining the same level BOTH or each channel can be adjusted independently INDEPENDENCE For more details regarding methods for the adjustment of audio recording levels refer to page 35 DISC IN ACTION This parameter s setting is used during the recording of discs to indicate the action to be taken when a completed i e finalized disc is inserted into this DVD recorder or a different DVD player MENU The title menu is displayed TITLE Playback of the main content begins TITLE END This parameter s setting is used during the recording of discs to indicate the action to be taken when playback of a title on a completed disc has ended MENU The title menu is displayed REPEAT Play back from the top of the title begins e REMOTE MENU screen e REMOTE SELECT This parameter should be set to OFF when not controlling the DVD recorder via the RS 422A REMOTE terminal or the DV IN OUT terminal Alternatively the REMOTE CONTROL screen can be displayed by setting this to 9PIN MASTER DV MASTER
105. l via RS 422A BD X200 Set REMOTE SELECT from the REMOTE MENU screen to 9PIN MASTER REMOTE MENU screen e When REMOTE SELECT is set to 9PIN MASTER the REMOTE CONTROL 9PIN MASTER screen will appear This screen is used to perform editing operations and the corresponding operations are described on the following pages REMOTE SELECT 9PIN MASTER se SS REMOTE CONTROL 9PIN MASTER screen REMOTE MENU REMOTE CONTROL SCREEN 9PIN MASTER EXIT AN POINT 00 00 00 00 OUT POINT 00 10 00 00 Fit him s f him sr him si f 00 00 00 00 2 00 15 00 00 3 00 20 00 00 00 25 00 00 00 30 00 00 00 35 00 00 7 00 40 00 00 8 00 45 00 00 9 00 50 00 00 CHAPTER MANUAL TC INPUT Fe BEE REESEN ADJ BITRATE g Mbps DISC REMAIN g min en pressing an olding the TCSET EDLLOAD button more than 2 seconds while the DVD RRE recorder is stopped encoded output C images can be checked while the button isbaing h ld L lt jC EE 59 Downloaded From DvDPlayer Manual com JVC Manuals Synchronous Recording Recording Playback Signals From a VCR with RS 422A continued Editing Via the REMOTE CONTROL 9PIN MASTER DV MASTER Screen A keyboard and mouse can be used as an alternative to the DVD recorder s buttons when using the REMOTE CONTROL 9PIN MASTER DV MASTER screen Front panel Select using the cursor buttons gt V and A
106. layed on screen OFF ON The status is to be displayed on screen Note however that nothing will be ON displayed when OFF has been set for the DISPLAY parameter OFF This parameter is used to indicate whether or not the current date and or time are to DATE be displayed on screen TIME OFF No such information is to be displayed on screen TIME DATE DATE Only the date is to be displayed TIME Only the time is to be displayed OFF TIME DATE Both date and time are to be displayed DATE e When the DVD recorder is stopped or recording data from the internal clock is TIME displayed When playing a disc the date and time of disc finalizing are displayed T D e Even if DATE TIME or DATE TIME have been selected nothing will be displayed when OFF has been set for the DISPLAY parameter REMAIN OFF This parameter is used to indicate whether or not the disc s remaining time in minutes ON is to be displayed on screen OFF No such data is to be displayed on screen ON This data is to be displayed on screen e During recording the remaining space available for recording is displayed in KEE minutes REMAIN OFF During playback the time remaining in the current title is displayed ON e Nothing will be displayed when OFF has been set for the DISPLAY parameter Note The remaining space available for recording will depend on factors such as the number of titles recorded and the data encoding method accor
107. le closing select YES and then press the SET button barren wen e Title closing will begin The state of progress during title closing is displayed using a progress bar THUMBNAIL EDIT Kael ect AAA BBBB sce april TITLE CLOSE TITLE CLOSE 2 Yes Dei Select NO and then press the SET button to close the confirmation window The title will not be closed in this case E When title closing has been completed the progress bar will disappear Notes e maximum of 10 minutes will be required to complete title closing elt EDIT MENU from the SYSTEM MENU screen is set to DISABLE title closing will be carried out automatically whenever recording is ended by for example pressing the STOP button In such a case title and chapter menus are created using preset settings 52 Downloaded From DvDPlayer Manual com JVC Manuals Changing amp Checking Title Menu Styles amp Names If EDIT MENU from the SYSTEM MENU screen is set to ENABLE the TITLE MENU EDIT screen will be displayed upon disc finalizing Using this screen it will be possible to change the title menu s display style to enter title names and to confirm that the title and chapter menus are as required e Thumbnail of the title menu will be the top thumbnail of the chapter menu Opening the TITLE MENU EDIT screen TITLE MENU EDIT screen TITLE MENU CRE Set EDIT M
108. lected using INPUT SELECT from the INPUT SELECT MENU screen Note 2 The audio signals for input are selected using INPUT SELECT from the INPUT SELECT MENU screen When either LINE or Y C is set for INPUT SELECT the analog audio signals from the AUDIO IN terminals will be selected for input When DV is set for INPUT SELECT the DV audio signals from the DV IN OUT terminal will be selected for input Note 3 When the DVD recorder is in Stop or Recording mode the video input signal is output on the E E screen as a composite video signal In addition the Setup Menu and other setting screens are also displayed on the monitor connected to this terminal The DVD recorder s operation status and other relevant information are displayed on screen when DISPLAY from the DISPLAY MENU screen has been set to ON Note 4 The Y C IN terminal s specification e S1 or S2 can be selected using Y C TERMINAL MODE from the RECORDER MENU 2 2 screen Note 5 The standard input level for audio signals input via the AUDIO IN terminals e 4 dB or 8 dB can be selected using the AUDIO INPUT LEVEL switch on the rear panel 21 Downloaded From DvDPlayer Manual com JVC Manuals Preparation Signal Connections continued E Control signals DV camera or VCR RS 422A compatible VCR Note 3 DV cable Remote cable Note 2 DV IN OUT REMOTE Nonlinear editing system BD X200 AC adaptor include
109. les the speed of fast forward play between x3 and x15 the speed of slow forward play between x0 5 and x0 06 E Fast reversing E Slow reversing e Press the REV button during playback or fast forward play e Press the REV button in Still mode or during slow forward to start fast reverse play play to start slow reverse play If pressed again during fast reverse play this button toggles If pressed again during slow reverse play this button toggles the speed of fast reverse play between x3 and x15 the speed of slow reverse play between x0 5 and x0 06 Notes e The DVD recorder can be returned to Playback mode during fast forward fast reverse slow forward or slow reverse play by pressing the PLAY button Still mode can be activated by pressing the PAUSE button Stop mode is activated by pressing the STOP button e The displayed playback speed is not an exact value Playing the Previous or Next Chapter M Press the button while the DVD recorder is playing to move playback to the start of the next chapter M Press the d button while the DVD recorder is playing to move playback to the start of the current chapter If the lt button is pressed while the DVD recorder is playing the first chapter playback will return to the beginning of that chapter The button is deactivated during playback of the final chapter OPTION DV Y C LINE SET UP D S TOP MENU MENU O0 lt button gt button 58
110. menu and to input title names 8 Downloaded From DvDPlayer Manual com JVC Manuals Region Codes One of six numbers referred to as region codes is assigned to DVD content to control the global regions in which this content may be viewed If a DVD s region code does not correspond to the region code of the DVD player being used it will not be possible to play the disc e This DVD recorder assigns the region code ALL to the discs that it records e lt will not be possible to play discs to which region codes have been assigned Screen Sizes This DVD recorder is capable of recording video content for wide screen TVs i e with a 16 9 aspect ratio In addition signals for normal content with a 4 3 aspect ratio for squeezed content e where the left and right are compressed and for letterbox content i e where the top and bottom of the screen are black can be recorded as is e Thumbnail creation method for use in the title chapter menu during wide signal input can be selected in THUMBNAIL FORM of the RECORDER 2 2 menu screen es Page 81 Component Names amp Functions Front Panel BUSY sl o OPEN CLOSE o Gho DOLBY DIGITAL TITLE DVD RECORDER BD X200 CHAPTER LE E 1 OPTION DV ve LINE Z SS ka ep al L Ms H H H S G SS 8 REV STOP PLAY FWD 0 0 0 D 0 00 D PAUSE REC E TOP MENU MENU
111. nal When it is connected to an RS 422A compatible VCR therefore RS 422 control can be used to carry out synchronous recording of the VCR s video and audio to a DVD Various menu settings are required Synchro recording is carried out from the REMOTE CONTROL screen Page 59 e When a digital video camera or a DV player is connected to the BD X200 using a DV cable and when this DVD recorder is setup as the master device for DV control using menu settings synchronous recording of any video and or audio signals from the DV player can be carried out to a DVD Synchro recording is carried out from the REMOTE CONTROL screen es Page 63 e The DV IN OUT terminal can be used to record audio and video from a non linear editor to a DVD In such a case the BD X200 must be setup as the control slave using menu settings The DVD recorder will be controlled by the non linear editor in this type of setup Page 64 WEThe title and chapter menus can be created either automatically or manually Page 43 Five different patterns have been provided as display styles for the title and chapter menus Each of these patterns is characterized by different thumbnail characteristics e number position and size and background images displayed on the title and chapter menu screens When a display style is selected during the recording of content to a DVD the BD X200 will automatically create the title and chapter menus in accordance with this style
112. ng must be made during the recording process MENU The title menu is to be displayed REPEAT Playback is to be repeated within the current title This button is used to return to the RECORDER MENU 1 2 screen 81 Downloaded From DvDPlayer Manual com JVC Manuals Setup Menu REMOTE MENU screen The following table identifies and describes the parameters that may be set using the REMOTE MENU screen Top half Bottom half Parameter REMOTE SELECT Possible settings OFF 9PIN MASTER DV MASTER DV SLAVE DV TRIGGER REMOTE Appearance on monitor screen Appearance on LCD display Default setting Description This parameter is used to select a method for controlling external devices connected via the RS REMOTE terminal or the DV IN OUT terminal OFF Control is not to be carried out via the RS 422A REMOTE terminal or the DV IN OUT terminal This is the standard setting for normal operation This setting is made when recording audio and video from a VCR connected to the RS 422A REMOTE terminal When selected the REMOTE CONTROL 9PIN MASTER screen appears and this screen can be used to carry out recording operations This setting is made when recording audio and video from a DV camera or video connected to the DV IN OUT terminal When selected the REMOTE CONTROL DV MASTER screen appears and this screen can be used to carry out recording operations This setting is made when
113. ng output XX indicates the bit rate Display of the Setup Menu Menu items and setting values from the Setup Menu are displayed Page 74 Event messages Messages relating to incorrect operation and the like are displayed for approximately 3 seconds Page 19 Alarm messages Alarms are displayed when the DVD recorder cannot obey a command Page 20 15 Downloaded From DvDPlayer Manual com JVC Manuals LCD Display and On Screen Content On Screen Content In addition to E E and playback screens the monitor connected to the DVD recorder s VIDEO LINE OUT terminal can display the following e Status messages e Event messages e Alarm messages e The Setup Menu Page 74 e Recording operation control screens REC CONTROL panel Page 41 REMOTE CONTROL screen r Page 60 Status Messages The DVD recorder s setting condition and operation status are indicated by status messages and these messages are displayed on E E or playback screens The DISPLAY MENU screen can be used to indicate whether or not status messages are to be displayed DISPLAY MENU screen DISPLAY MENU TITLE CHAPTER ON RECORDER MODE ON TIME DATE TIME DATE REMAIN ON DATE STYLE MM DD YY DISC TITLE 04 05 04 11 20 00 Operation Mode NO DISC EJECT OPE OFF STOP REC REC PAUSE PLAY STL FWD x3 FWD x 15 REV x 3 REV x 15 LOADING 16 Downloaded From DvDPlayer Manual com JVC Manuals Stat
114. ng the editing procedure TITLE PATTERN and CHAPTER PATTERN changed here are also reflected in PRESET STYLE of the SETUP MENU PRESET STYLE MENU screen PRESET STYLE BACK TYPE 1 3 TITLE PATTERN 1 e CHAPTER PATTERN 1 50 Downloaded From DvDPlayer Manual com JVC Manuals Checking the Chapter Menu Screen Use the following procedure to see how the chapter menu looks when the selected display style is used THUMBNAIL EDIT START screen THUMBNAIL EDIT TITLE CLOSE ei Ga TE AAA BBBB ccc april DDD EEE FFF 1 a CHAPTER MENU EDIT screen CHAPTER MENU BACK PRESET STYLE 2 CHAPTER MENU PREVIEW CHAPTER MENU PREVIEW screen 4 Back ck EES CIE Downloaded From DvDPlayer Manual com JVC Manuals N Ge Ga Select CHAPTER MENU from the THUMBNAIL EDIT START screen and press the SET button e The CHAPTER MENU EDIT screen will appear Select CHAPTER MENU PREVIEW from the CHAPTER MENU EDIT screen and press the SET bution e The CHAPTER MENU PREVIEW screen will appear Here it will be possible to preview the first page of the chapter menu Confirm that the other pages are as required Select from the CHAPTER MENU PREVIEW screen and press the SET button to move to the next page Select and press the SET button
115. nter key select the title for which text is to be input itle is highlighted e A box for inputting text will appear 4 Enter a name or comment into the text box TITLE INPUT Enter a name for the title august Names can be up to 20 CANCEL characters in length Select CANCEL and press the Enter key to close the text box without applying the name or comment that has been entered e The mark will become a backslash Notes K If text cannot be entered press the CTRL key right side on the keyboard 5 After the required text has been entered press the Enter key e The text box will close The name just entered will be applied to the selected title 6 Select BACK and then press the Enter key e The TITLE MENU EDIT screen will reappear e Note TITLE TEXT INPUT BACK ae TE AAA BBB ccc DDD If you select TEXT LOAD from the TITLE MENU screen and then press the SET button title text created using an external application will be read into the DVD recorder for use as a title name i TEXT LOAD 55 Title amp Chapter Menu Settings Changing amp Checking Title Menu Styles amp Names continued Finalizing Discs TITLE MENU EDIT screen 1 Select FINALIZE from the TITLE MENU EDIT screen and press the TITLE MENU SET button 1 mu e A confi
116. ntinue finalizing e The finalizing process will begin A bar showing the state of progress will be displayed during finalizing e The progress bar will disappear when finalization has been completed and the normal screen display will then be restored The REC CONTROL panel will not be displayed M Select NO from the confirmation screen to cancel finalizing and return to the previous screen FINALIZE YES NO r Notes gi e maximum of 20 minutes will be required to complete finalizing e When finalizing is carried out all of the disc s recorded video and audio are Progress screen stored in accordance with the DVD Video Standard accordingly this content can also be replayed as DVD video e Although a disc finalized using this DVD recorder may in principle be played on other DVD players there is no guarantee that all of its content will be playable e The action to be taken by this DVD recorder when a finalized disc is inserted or when playback of a title has ended is specified by DISC IN ACTION and TITLE END respectively from the RECORDER MENU 2 2 screen kT TITLE END is to be set before recording a title DISC IN ACTION is to be set before finalizing FINALIZE 42 Downloaded From DvDPlayer Manual com JVC Manuals Title amp Chapter Menu Settings BD X200 Title amp Chapter Menus This DVD recorder can automatically create title and chapter menus in respons
117. o From a Non Linear Editor continued 1 Registering the In Point Out Point and Chapter Marks Use the keyboard to directly enter the In Point Out Point and chapter marks Registering chapter marks In order to register chapter marks using the REMOTE CONTROL screen it will first of all be necessary to set CHAPTER CREATION from the RECORDER MENU 2 2 screen to MANUAL If this parameter is set to AUTO chapter marks will be automatically setup at specific intervals The current setting for CHAPTER CREATION is indicated in this screen s CHAPTER field Procedure Use the arrow keys gt t and to select the point to be REMOTE CONTROL SCREEN DV SLAVE i i i i ETAN POINT 00000000 oo es registered e the In Point or Out Point and then press the ED Enter key him s f him s f Too ooog ER 00 5900 00 Select the TC INPUT button using the cursor keys and input a 71 00 40 00 00__ 8 00 45 00 00 00 50 00 00 time code hours minutes seconds frames into the TC input field using the keyboard FINALIZE 3 Press the Enter key e The time code will be registered for the selected point e f both IN point and OUT point are not selected the time code will be registered as a chapter point e When atime code is registered for a chapter mark the chapter list will be sorted from the smallest time code values and the newly registered point will be highlighted Note The framing mode will be matched to that used
118. o large units referred to as titles A unique number called a title number is assigned to each of these titles and as a result any title can be immediately accessed using its title number In addition each title can be divided into smaller units referred to as chapters Similarly a unique number called a chapter number is assigned to each of these chapters and this allows any chapter to be immediately accessed using its chapter number Each recording made to a DVD R or DVD RW video mode is stored as a single title In this each pressing of the STOP button to leave Recording mode constitutes a different recording This action is also referred to as title closing Whenever the PAUSE button is pressed to pause recording a chapter mark is inserted into the current title It is also possible to insert chapter marks to partition titles at the desired points by pressing the REC button while recording In addition your BD X200 can also be used to automatically insert chapter marks at regular intervals CHAPTER CREATION menu settings will be required for this function DVD R or DVD RW Title 1 Title 2 Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2 e Before a title is closed it will be possible to modify the style used for chapter menu display to change the thumbnails used and to input thumbnail names e Before a disc is finalized it will be possible to modify the style used for the title
119. on the Confirmation box for the start of monitor connected to each device in the form of a progress bar dubbing r Notes N DVD DVD SENDER e Dubbing will not be carried out if CANCEL is selected from the confirmation box for the start of dubbing DUBBING START e When dubbing a complete disc approximately 90 minutes will be SENDER IP ADDRESS 192 168 000 002 required to complete the process e Do not disconnect any cables during the dubbing process If cable are accidentally disconnected both devices should be turned off once and then restarted before subsequent use RECEIVER IP ADDRESS 192 168 000 003 6 Dubbing proceeds to completion When dubbing has ended the display for the sender device returns to the DVD DVD SENDER DUBBING screen Finalizing is performed automatically by the receiver device During Dubbing DUBBING e To cancel dubbing S State of H ABORT from the DUBBING screen is selected and confirmed the progress following confirmation box will be displayed e Select EXECUTE and then press the SET button to cancel the dubbing process and Receiver device np mp SENDER return to the DUBBING menu DVD DVD RECEIVER Aborting makes he media a UNUSABLE 1 e Select CANCEL and press the SET button i to close the confirmation window without DUBBING canceling the dubbing process elt dubbing is canceled the partially recorded DVD will no longer be usable KL Bi RW DUBBING MEN
120. on the disc tray e Do not press down on the disc tray BUSY indicator This indicator flashes when the DVD recorder is in Recording Pause mode or when it is performing time consuming operations such as title closing finalizing and erasing None of the DVD recorder s buttons will have any effect if pressed while the BUSY indicator is flashing OPEN CLOSE button and indicator This button is used to open and close the disc tray In addition the OPEN CLOSE indicator is lit up while the disc tray is opening and also when it is open Downloaded From DvDPlayer Manual com JVC Manuals Note The OPEN CLOSE button will have no effect if pressed while the DVD recorder is in either Recording or Recording Pause mode This is also the case when performing finalizing erasing or dubbing Audio level indicator These meters are used to indicate the current level of audio on Channel 1 and Channel 2 Specifically the audio level meters indicate the audio recording levels when the DVD recorder is in Recording mode and the audio playback levels when it is in Playback mode Adjustment of the audio recording levels ve Page 35 OLCD display The LCD display is used to present important information During recording or playback for example the title chapter number and elapsed time are indicated on the LCD display Page 14 for more details Video input indicators E OPTION indicator This indicator is lit up o
121. onnect the power cord included to the AC adaptor s AC IN terminal 4 Insert the power cord into an electrical outlet e Power will be supplied to the DVD recorder and the OPERATE indicator will be lit up in red Operate Off mode Note A small amount of current will be required by the DVD recorder when in Operate Off mode CAUTION Always use the AC adaptor provided with the DVD recorder The use of other power sources should be avoided e Do not disconnect the DC cord or power cord during recording or playback In the case of DVD R discs failure to observe this precaution will result in the discs becoming unusable In the case of DVD RW discs it will be necessary to erase all data from the disc and to start recording again from the beginning 23 Downloaded From DvDPlayer Manual com JVC Manuals Preparation Turning the Power On amp Off OPERATE indicator BUSY a F OPENICLOSE R RW Do baer D DIGITAL au EE d DVD RECORDER BD X200 OPTION DV Y C LINE TITLE CHAPTER OPERATE button ERAR AGAGA r PHONES TOP REV STOP PLAY FWD PAUSE REC d menu 0 9 NI OO Turning the Power On Turning the Power Off E While in Operate Off mode e the OPERATE indicator W Stop the DVD recorder is lit up in red press the OPERATE button It is recommended that
122. or the currently selected style The STYLE parameter will display the type number of the style currently selected Select STYLE and then press the SET button to display the corresponding STYLE screen TITLE PATTERN The display pattern currently selected for the title menu Each display pattern uses different numbers positions and sizes for thumbnails in addition to a different background Type number CHAPTER PATTERN The display pattern currently selected for chapter menus Each display pattern uses different numbers positions and sizes for thumbnails in STYLE screen addition to a different background 3 Use the cursor buttons A V gt and 4 to select one of the eight style types and to display the corresponding STYLE screen containing both title and chapter patterns TITLE PATTERN CHAPTER PATTERN 4 To use a specific style select the corresponding type number and then press the SET button This type number will then be stored in the DVD recorder s memory Con Deel ES Following this the screen s BACK button will be highlighted The SET button can now be pressed to return to the PRESET STYLE MENU screen Milf BACK is used to exit the STYLE screen without the SET button being pressed for the newly selected type the style setting will not be updated 44 Downloaded From DvDPlayer Manual com JVC Manuals Selecting Display Styles The PRESET STYLE MENU s
123. orm DVD to DVD dubbing this terminal is connected to both BD X200s A cable of Category 5 or better is required for this connection A cross type Ethernet cable is required when connecting directly to another BD X200 e This terminal is also used when connecting to a PC on which BD X200 utility software for operations such as the creation of the title and chapter menus has been installed e Network settings must be carried out using the NETWORK MENU screen USB terminals 2 These terminals are used when connecting the DVD recorder to USB devices such as a keyboard or mouse A keyboard and mouse can be used as an alternative to the DVD recorder s buttons when using setting and control screens The input of text in setting screens is carried out using a keyboard Itis not be possible to operate devices other than a keyboard or mouse by connecting them to the USB terminal e Set KEYBOARD STYLE from the SYSTEM MENU screen in accordance with the keyboard s input language Recommended manufacturers Logitech Downloaded From DvDPlayer Manual com JVC Manuals 1 DC IN terminal 2 pin This terminal is used to provide DC at 19 V to the DVD recorder The DC power cord from the AC adaptor included should be connected here Note When power is supplied via this terminal the OPERATE indicator on the front panel lights up in red DC power cord clamp This clamp secures the DC power cord in place and it should
124. parameters RECORDER MENU 1 2 screen e CHAPTER CREATION This parameter indicates whether chapters are to be created automatically or manually MANUAL Chapters will be created manually To create a chapter press the REC button while recording Chapters are to be created automatically In this case the DVD recorder will create chapters at the time intervals set using SET INTERVAL e TOTAL CONTENT TIME This parameter is used to make a setting relevant to the encoding or compression of video data A setting should be made here when the DVD recorder is to automatically set the bit rate based on the recording time and the remaining disc capacity Specifically this parameter sets the recording time AUTO Downloaded From DvDPlayer Manual com JVC Manuals e ENCODE QUALITY This parameter is used to manually set the bit rate for video data e AUDIO ENCODE This parameter is used to set the format for encoding or compressing audio data For more details regarding the encoding of audio and video refer to pages 33 34 e ASPECT This parameter is used to set the aspect for recorded video AUTO 4 3 LETTER BOX or SQUEEZE RECORDER MENU 2 2 screen e Y C TERMINAL MODE This parameter indicates whether the Y C IN terminal s specification is S1 or S2 Specifically it selects the recording method for the wide screen discrimination signal THUMBNAIL FORM This parameter selects the method to be used for thumbnai
125. r flashes when INPUT SELECT from the INPUT SELECT MENU screen has been set to OPTION This setting cannot be carried out using the DVD recorder alone E DV indicator This indicator is lit up or flashes when INPUT SELECT from the INPUT SELECT MENU screen has been set to DV Specifically the indicator is lit up when an input signal is present and it flashes when no signal is present E Y C indicator This indicator is lit up or flashes when INPUT SELECT from the INPUT SELECT MENU screen has been set to Y C Specifically the indicator is lit up when an input signal is present and it flashes when no signal is present E LINE indicator This indicator is lit up or flashes when INPUT SELECT from the INPUT SELECT MENU screen has been set to LINE Specifically the indicator is lit up when an input signal is present and it flashes when no signal is present Phones jack and volume adjuster The phones jack allows headphones to be connected to the DVD recorder for monitoring of audio levels in addition the headphone volume can be adjusted using the volume adjuster Note that this adjuster has no effect on the actual recording levels Component Names amp Functions Front Panel continued GN LF E R RW BUSY OPEN CLOSE ES ell TITLE CHAPTER DVD RECORDER BD X200 TAL fe mm 1 PTION DV Y C LINE H H g Roe RR F PHONES REV STOP PLAN FWD P
126. rations from the DVD recorder REMOTE MENU Not compatible with the REPLICATION feature of BR DV6000 REC CONTROL OFF REMOTE SELECT DV TRIGGER Note REM FF REW MODE FF REW Procedure BRecording on the BD X200 will start and stop in response to operation of the trigger button on the GY DV5000 When using make sure triggers are at least 1 second apart 69 Downloaded From DvDPlayer Manual com JVC Manuals DVD Dubbing Dubbing DVDs Using the LAN Terminal When the LAN terminal is used to join two BD X200 DVD recorders via an Ethernet connection audio and video from a sender DVD can be dubbed onto a DVD on the receiver device Connected devices One BD X200 SENDER used for playback of the master DVD One BD X200 RECEIVER used for DVD recording Signal Connections All connection and disconnection of cables should be carried out with the power turned off E Direct connection of two BD X200s Connect an Ethernet cable between the LAN terminals of the sender and receiver devices A Category 5 cross wired Ethernet cable should be used in this case Sender BD X200 Receiver BD X200 LAN terminal CAT 5 cross wired cable 70 Downloaded From DvDPlayer Manual com JVC Manuals Network Settings Use the following procedure to carry out network settings on both the sender and receiver devices Cursor buttons A V gt and ai BUSY a OPEN CLOSE Ei DIGITAL
127. recording audio and video from a non linear editor connected to the DV IN OUT terminal When selected the REMOTE CONTROL DV SLAVE screen appears In addition the BD X200 will become the slave device and will be controlled by the non linear editor This setting is made when the BD X200 is connected to a DV camera featuring a DV record triggering function and it allows this DVD recorder to record video from the camera in response to operation of its trigger button 9PIN MASTER DV MASTER DV SLAVE DV TRIGGER Note When setting this item to 9PIN MASTER DV MASTER or DV SLAVE the video output image becomes the REMOTE CONTROL screen display However video input can be checked by press and holding the REC button while DVD Recorder is stopped and viewing the encode output REC CONTROL OFF ON OFF ON This parameter is used to indicate whether or not the REC CONTROL panel is to be displayed on the monitor screen DN The REC CONTROL panel is to be displayed only when a recordable disc has been inserted and the DVD recorder is in Stop Recording or Recording Pause mode OFF The REC CONTROL panel not to be displayed FF REW SEARCH SEARCH mr d SEA This parameter is used to select the command output via the RS 422A REMOTE terminal or DV terminal when the FF or REW button is pressed on the REMOTE CONTROL 9PIN MASTER DV MASTER screen FF REW AFF or REW command is to be output
128. reen is set to ON Event message REC TITLE 1 0 11 22 CHAPTER 1 0 11 22 LCD display message INVALID TV Description A signal of an invalid format has been input Alternatively an attempt has been made to play a disc containing signals of an invalid format TITLE FULL TITLE FULL Recording was attempted on a disc already containing 99 titles CHAPTER FULL CHAP FULL An attempt was made to add a chapter to a title already containing 99 chapters NOT FINALIZE NOT FINAL An attempt was made to eject a disc before it was finalized A L xxxx R Set value is displayed when changing the recording level of analog audio D L xxxx R Set value is displayed when changing the recording level of digital audio DURATION OVER Auto Edit was carried out when the remaining disc space became insufficient during RS 422A or DV remote operation INVALID EDL An incorrect value was entered during the registration of an edit list EDL EDL UNDER EDIT EDL Load was carried out after starting the registration of an edit list EDL NO CASSETTE During RS 422A or DV remote operation an attempt was made to control the connected VCR while it did not contain a video tape NOT CONNECT During RS 422A or DV remote operation a control operation was attempted while no external device was connected EDIT FAILURE Editing could not be completed normally 19 Downloa
129. ress Receiver device If setting a new sender device IP address set the IP address of the sender device e Use the gt and a cursor buttons to select the digit to be changed e Press the cursor A V buttons to set the value of the selected digit e Repeat the above for all digits select SET using the lt P buttons and press the SET button e The sender device IP address set using this dialog box will be registered as the most up to date address on the receiver device e When all of the necessary settings have been made the status of the sender device will be displayed on the receiver device s monitor e This screen will not appear when setting the sender device first DVD DVD RECEIVER Searching SENDER IP ADDRESS 192 168 000 002 4 5 Sender device 4 The sender device will begin searching for receiver devices e When connection has been completed a dialog box for confirming the start of dubbing will appear e The IP address of the identified receiver device will be displayed in the dialog SENDER IP ADDRESS 192 168 000 002 box for confirming the start of dubbing 5 Sender device To proceed with dubbing select EXECUTE in the confirmation box for the start of dubbing and press the SET button DVD DVD SENDER RECEIVER Searching 4 e DVD to DVD dubbing will begin As dubbing is carried out the state of progress will be displayed
130. rmation window will appear PESTE TER 2 Select YES and then press the SET button ET e The disc finalizing process will begin The state of progress during finalizing is displayed using a progress bar When the disc has been finalized the progress bar will disappear and the E E screen will return Confirmation screen Notes e A maximum of 20 minutes will be required to complete finalizing e When finalizing is carried out all of the disc s recorded video and audio are stored in accordance with the DVD Video Standard accordingly this content can then also be replayed as DVD video FINALIZE e Although a disc finalized using this DVD recorder may in principle be played 2 vs on other DVD players there is no guarantee that all of its content will be playable e The action to be taken by this DVD recorder when a finalized disc is inserted or when playback of a title has ended is specified by DISC IN ACTION and Progress screen TITLE END respectively from the RECORDER MENU 2 2 screen e Select EXIT from the TITLE MENU EDIT screen and then press the SET button to return to the E E screen without finalizing the disc FINALIZE A 56 Downloaded From DvDPlayer Manual com JVC Manuals Playback Playing Discs This DVD recorder can also be used to playback discs that it has recorded and finalized When a disc is finalized its title menu will be used to
131. s a FINALIZE chapter mark CT EDL LOAD 68 Downloaded From DvDPlayer Manual com JVC Manuals Recording Operations Using a DV Camera Trigger By connecting a camera featuring a DV terminal to this DVD recorder audio and video from the camera can be easily recorded to a disc In this type of situation the DV camera s trigger button is used to control the BD X200 Supported cameras GY DV5000 Signal Connections TV set or monitor Rear panel VIDEO OUT AUDIO OUT at GY DV5000 QO lt SE an TT dre a 6 e Bee des A z DV terminal 66 2 DV IN OUT terminal video audio and control signals DV cables VC VDV204 2 m 4P 4P from JVC VC VDV206 2 m 4P 6P from JVC e Connect the DV IN OUT terminal on the rear of your BD X200 to the DV terminal on the GY DV5000 using a DV IEEE1394 cable One of the commercially available cables indicated above should be used for this purpose e Connect the DVD recorder s VIDEO LINE OUT and AUDIO OUT terminals to the monitor s video in and audio in terminals Setup Procedures e Insert a recordable disc into your BD X200 GY DV5000 Set DV REC TRIGGER from the OTHERS MENU 1 2 screen to ON BD X200 Set REMOTE SELECT from the REMOTE MENU screen to DV TRIGGER Input will automatically be DV REMOTE MENU screen e The BD X200 will adopt Slave mode It will not be possible to control recording ope
132. s damaged or frayed b If liquid has been spilled into the appliance c If the appliance has been exposed to rain or water d If the appliance does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to normal operation e If the appliance has been dropped or the cabinet has been damaged f When the appliance exhibits a distinct change in performance this indicates a need for service When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards Upon completion of any service or repairs to this appliance ask the service technician to perform routine safety checks to determine that the appliance is in safe operating condition Downloaded From DvDPlayer Manual com JVC Manuals Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ATTENTION RISQUE D ELECTROCUTION NE PAS OUVRIR ATTENTION POUR EVITER TOUT RISQUE D ELECTROCUTIO
133. s used to select the audio and video input signals LINE The composite video signal from the VIDEO LINE IN terminal and the analog audio signals from the AUDIO IN terminals are to be used Y C The YC separate signal from the Y C IN terminal and the analog audio signals from the AUDIO IN terminals are to be used DV The audio and video signals from the DV IN OUT terminal are to be used Note Setting of INPUT SELECT will not be possible when REMOTE SELECT from the REMOTE MENU screen has been set to DV MASTER DV SLAVE or DV TRIGGER DV signals will be used for input at these times Confirming Input Signals The type of video signals that have been selected for input can be confirmed D DD D d A SE h using the video input signal indicators on the DVD recorder s front panel OPTION DV Y C LINE i ay f Specifically the indicator corresponding to the type of input signal selected using INPUT SELECT will be lit up or flashing Lit The selected signal is being received Flashing The selected signal is not being received 32 Downloaded From DvDPlayer Manual com JVC Manuals Setting the Encoding Format for Audio amp Video The setting of encoding formats for audio and video is carried out from the RECORDER MENU 1 2 screen as described below BUSY Gi OPENCLOSE Damas EE OPTION DV VC LINE RECORDER MENU 1 2 screen RECORDER MENU 1 2 CHAPTER CREATION SET INTERVAL TOTAL CO
134. sages 000 min 4 Ce En Cu REC 04 05 04 TITLE 1 0 11 22 11 20 00 CHAPTER 1 0 11 22 Description Use TITLE CHAPTER from the DISPLAY MENU screen to indicate whether or not this is to be displayed Recording mode The title number and chapter number currently being recorded are displayed together with the elapsed title recording time in hours minutes and seconds Playback mode The title number and chapter number currently being played are displayed together with the elapsed title playback time in hours minutes and seconds Date Time Use TIME DATE from the DISPLAY MENU screen to select the way in which the date and time are displayed OFF No information is displayed DATE Only the date is displayed TIME Only the time is displayed TIME DATE Both date and time are displayed e The date display style can be changed using DATE STYLE from the DISPLAY MENU screen Recording mode The date and time from the internal clock are displayed Playback mode The date and time of disc finalizing are displayed Remaining time Use REMAIN from the DISPLAY MENU screen to indicate whether or not this is to be displayed Recording mode The amount of video that can still be recorded on the current disc is displayed in minutes Playback mode Not displayed Remaining time is to be used as a general guide not as an exact figure REC CONTROL panel Provided that
135. screen as a composite video signal e Ifthe REC button is pressed and held for at least 2 seconds while the DVD recorder is stopped the input signal will be subjected to MPEG encode decode processing and output via the VIDEO LINE OUT terminal This will continue for as long as the REC button is held and it allows the DVD recording quality to be confirmed e Playback from the DVD is output as a composite signal when in Playback mode e The Setup Menu title menu chapter menus and other setting and control screens are displayed on the monitor connected to this terminal e Status and alarm information is also displayed on screen The DISPLAY MENU screen can be used to indicate which items are to be displayed AUDIO INPUT LEVEL switch This switch is used to set the standard level for audio input 4dB The standard level is set to 4 dB 8dB The standard level is set to 8 dB 12 Downloaded From DvDPlayer Manual com JVC Manuals AUDIO IN terminals RCA x 2 These terminals allow analog audio signals to be input to the DVD recorder e In order to select these signals for input set INPUT SELECT from the INPUT SELECT MENU screen to LINE or Y C AUDIO OUT terminals RCA x 2 These terminals allow analog audio signals to be output from the DVD recorder e When the DVD recorder is in Stop or Recording mode the audio input signals i e E E signals are output via these terminals e Audio from the DVD is ou
136. setting Downloaded From DvDPlayer Manual com JVC Manuals 35 Settings amp Controls for Recording Checking the Video Input Use the monitor connected to the VIDEO LINE OUT terminal to confirm that the input video signal is as required The following procedure will allow you to monitor the quality at which the video will be recorded to a DVD VIDEO LINE OUT terminal Monitor screen Signal Connections Connect the VIDEO LINE OUT terminal to the monitor cl E Press and hold the REC button for at least 2 seconds while the DVD CCS SFSSENENEE ole recorder is stopped or inserted with no disc While this button is being ts On held input signal encoded decoded in MPEG will be output via the VIDEO DEI OIt 00 z 2 OUT terminal on the rear panel o e This function allows the quality of the video to be confirmed before recording to a DVD REC button Note Audio will be muted at this time The bit rate setting value is indicated on the LCD display ENCODING XX Bit rate value 36 Downloaded From DvDPlayer Manual com JVC Manuals Selecting Styles for Title amp Chapter Menu Each recorded DVD contains title and chapter menus that provide information relating to its titles and chapters Whenever recording is carried out title numbers chapter numbers and thumbnails are automatically generated in order to
137. ss the SET button to move to the previous page TITLE MENU PREVIEW screen e and lt lt can be used in combination with the SET button to skip forward or back in units of ten pages 3 BACK lt lt lt gt gt gt 1 o 02 03 Displays the previous page Displays the next page BACK IL Je gt gt 8 Displays the page number Thumbnail a Background TITLE MENU EDIT screen TITLE MENU 4 _omz PRESET STYLE TITLE TEXT INPUT Serres 3 Complete the preview process ET To do this select BACK from the TITLE MENU PREVIEW screen and press the SET button e The TITLE MENU EDIT screen will reappear 4 If you wish to finalize the disc select FINALIZE from the TITLE MENU EDIT screen and then press the SET button page 56 Notes e Up to 20 seconds may be required per page to display the PREVIEW screen More time may be required depending on the number of thumbnails per page e During creation of preview displays jump by selecting the button can only be made to the page being created 54 Downloaded From DvDPlayer Manual com JVC Manuals Entering Names for the Title Menu TITLE MENU EDIT screen TITLE MENU FINALIZE PRE
138. te The rating plate serial number plate is on the bottom of the unit INFORMATION This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense CAUTION CHANGES OR MODIFICATIONS NOT APPROVED BY JVC COULD VOID USER S AUTHORITY TO OPERATE THE EQUIPMENT AVERTISSEMENT POUR EVITER LES RISQUES D INCENDIE OU D ELECTRO CUTION NE PAS EXPOSER L APPAREIL A L HUMIDITE OU A LA PLUIE Ce magn toscope ne doit tre utilis que sur du courant alternatif en 120V ATTENTION Afin d viter tout resque d incendie ou d lectrocution ne pas utiliser d autres sources d alimentation lectrique REMARQUE La plaque d identification num ro de s rie se trouve sur le panneau arri re de l appareil WARNING The battery used in the BD X200U must be replaced by a JVC authorized service dealer only
139. tection technology and except in situations where special permission has been granted by that company said technology is restricted to domestic usage and for certain other viewing purposes The disassembly and or modification of this DVD recorder is also prohibited Copyrights e The recording dubbing or playing of software containing a copyright protection signal is not possible on this DVD recorder e The usage of audio or video discs created using this DVD recorder either for financial gain or in broadcasting for widespread viewing may result in the legally enforceable rights of the copyright holder being infringed e Unless the permission of the copyright holder has been obtained audio or video discs created using this DVD recorder are to be used for personal enjoyment only DVD RecordiNg WEE 29 Preparing a Disc for Recording eege nsien niin o a ia aa eae i an rire 30 NC geleed EE EN Selecting amp Confirming Input Signals isa 32 Setting the Encoding Format for Audio amp Video siens 33 Adjusting of Audio Recording Levels sise 35 Checking the Video Input 0 2 2 eeeeeeeeeneeeeeeceeeteaeeeaeeteaeeeseeeeaeessaeeeaeesaaesaeesaeeseaeesaeesaeesaeeeaeeseaeesaeseaeescaeseaeessaeeeieeseaeenaes 36 Selecting Styles for Title amp Chapter Menu iii 37 Recording RE EE 38 Recording with the Front Panel cecceesceseeeeeseeeeeeeeeeceaeeeeeeeaeecsaeeeaeesaaeeeaeeseeesaeesaeeeaeeseaeeeaeesaesseeseaeesieeseaeesieeseaeeeeaeens 39
140. ted using an external application will be a tae to ee i read into the DVD recorder for use as a thumbnail ote that at the time of purchase name display characters will be as follows pop feee FFF PATTERN No Display characters R i 16 EE TEXT LOAD 2 19 L J 3 17 4 20 15 line return 5 5 16 6 49 Title amp Chapter Menu Settings Changing amp Checking Chapter Menu Styles Although display styles for chapter menus are created using settings from the PRESET STYLE MENU screen as described above the following procedure can be used to modify these styles at the end of title recording In addition it will also be possible at this time to confirm that chapter menus are as required These actions are carried out by selecting and confirming CHAPTER MENU from the THUMBNAIL EDIT screen Changing the Display Style THUMBNAIL EDIT 1 Select CHAPTER MENU from the THUMBNAIL EDIT screen and press the SET button AAA Bee EE e The CHAPTER MENU EDIT screen will appear ppp Jeee err 2 Select PRESET STYLE from the CHAPTER MENU EDIT screen and then press the SET button 10 gem e The PRESET STYLE MENU screen will appear The style number set using the PRESET STYLE parameter will be displayed in this screen CHAPTER MENU an 3 To change the display PATTERN 2 ee At Select PATTERN and then press the SET button Turn to page 44 for details regardi
141. though digital signals do not deteriorate storage environments can have an effect on a disc s aging characteristics and this may result in an inability to play or record Milf a disc should break there will be no way to recover data from it Proper playback of discs recorded using this DVD recorder on all devices is not guaranteed Introduction Precautions for Disc Usage Care of Discs to Ensure High Quality Playback BFingerprints dust or any other similar contamination of the surface of a disc can lead to distortion in the playback of recorded video and audio For this reason it is good practice to wipe each disc with a soft cloth before use E Looking After Discs e Using a soft cloth wipe the disc gently from the inside to the outside e f stubborn dirt is present on the surface of a disc wipe first using a slightly wet cloth and then using a dry cloth e Paint thinners organic solvents analog record cleaning agents anti static sprays and the like must never be used Failure to observe this precaution can lead to discs being permanently damaged Additional Notes on Disc Handling Never wipe a disc using paint thinners organic solvents alcohol or record cleaning fluid Wo not use disc protectors or scratch guards W Stickers and other types of paper label should not be applied WDo not use discs from which stickers or labels have been removed BDo not use discs on which illustrations or
142. to enable DVD to DVD dubbing via the LAN terminal CANCEL Dubbing is not to be carried out EXECUTE Dubbing is to be carried out Page 70 84 Downloaded From DvDPlayer Manual com JVC Manuals This button is used to return to the Setup Menu screen NETWORK MENU Screen The following table identifies and describes the parameters that may be set using the NETWORK MENU screen Top half Appearance on monitor screen Bottom half Appearance on LCD display Default setting Parameter Possible settings Description HOST NAME bdx200 This parameter is used to enter the BD X200 s network name using a keyboard Names may be up to 20 characters in length Alphanumerical characters and hyphen 192 168 0 2 This parameter is used to set the IP address It is important to ensure that no two devices on a single network share the same IP address 255 255 255 0 This parameter is used to set the subnet mask Connected BD X200s should have the same network setting SUBNET DEFAULT 192 168 0 254 This parameter is used to set the gateway address Connected BD X200s should GATEWAY have the same address This button is used to return to the Setup Menu screen Others Troubleshooting Before requesting for repair please check the following URL http www ivce victor co jp english pro prodv If problem persists contact either the store where the BD X200 was purchased or your nearest
143. to page 42 Progress bar Inserting Chapter Marks Manually or Automatically RECORDER MENU 1 2 screen In addition to pausing the recording a number of different manual and automatic methods can be used to insert chapter marks The actual method to be used is determined by CHAPTER CREATION and SET INTERVAL from the RECORDER MENU 1 2 screen CREER Seier e if chapter marks are to be inserted manually at any point set CHAPTER TOTAL CONTENTS TIME NO USE CREATION to MANUAL ENCODE QUALITY Mbps 44 Chapter marks can then be inserted by pressing the REC button while recording e f chapter marks are to be inserted automatically first of all set CHAPTER CREATION to AUTO Then use SET INTERVAL to set a time in minutes for chapter mark insertion The DVD recorder will insert chapter marks at the corresponding intervals during recording RECORDER MENU 1 2 AUDIO ENCODE LPCM Notes gi The frame at which a chapter mark is inserted will be used for the corresponding thumbnail in the chapter menu When EDIT MENU from the SYSTEM MENU screen is set to ENABLE the frames used for thumbnails can be modified on the THUMBNAIL EDIT screen that appears automatically at the end of recording e Each title can contain up to 99 chapters e In certain cases the frames used for chapter menu thumbnails may differ slightly from the exact frames at which the corresponding chapter marks were inserted 40 Downloaded From DvDPla
144. tput when in Playback mode DV IN OUT terminal This I O terminal for digital signals conforms with IEEE1394 specifications As such it allows the DVD recorder to be connected to DV cameras DV VCRs and non linear editors with DV terminals e In order to select this terminal s audio and video signals for input set INPUT SELECT from the INPUT SELECT MENU screen to DV e REMOTE SELECT from the REMOTE MENU screen is used to select a control method for this terminal as follows DV MASTER The DVD recorder operates as the master device and controls a DV camera or VCR The DVD recorder operates as a slave device and is controlled by commands from a non linear editor The DVD recorder performs recording in response to operation of the trigger button on a camera capable of DV triggering i e a GY DV5000 DV SLAVE DV TRIGGER RS 422A REMOTE terminal D sub 9 pin male This terminal is used to connect the DVD recorder to a VCR capable of being controlled via RS 422A RS 422A control of a VCR using the RS 422A REMOTE terminal is carried out with the DVD recorder operating in Master mode In order to use this terminal set REMOTE SELECT from the REMOTE MENU screen to 9PIN MASTER Video and audio from the VCR can be recorded to a DVD using commands issued from the REMOTE CONTROL screen Page 59 LAN terminal RJ 45 e When two DVD recorders are used to perf
145. ts title menu will be used to create the top menu e Thumbnail creation method during wide signal recording can be selected in THUMBNAIL FORM of the RECORDER 2 2 menu screen 43 Downloaded From DvDPlayer Manual com JVC Manuals Title amp Chapter Menu Settings Selecting and Changing Styles for Title amp Chapter Menus Title and chapter menus are used during playback of a DVD to select a title or chapter for viewing Your BD X200 provides a total of eight different styles for displaying title and chapter menus Use the following procedure during the recording process to select styles for these menus Typical Title Menu Notes e This DVD recorder can store a total of eight display styles where each style is a combination of title and chapter menu display characteristics Thumbnail 7 e The title menu can be displayed by pressing the TOP MENU button on the Title front panel while in Stop or Playback mode furthermore the chapter menu number Background can then be opened using the MENU button Confirming or Selecting a Style Display styles can be selected and modified using the PRESET STYLE MENU screen PRESET STYLE MENU screen 1 Press the SET UP button to display the Setup Menu select PRESET STYLE and then press the SET button e The PRESET STYLE MENU screen will appear PRESET STYLE MENU MENU STYLE TITLE PATTERN CHAPTER PATTERN N Confirm the settings f
146. u cannot be changed e The titles created before finalizing will be displayed as the top menu Finalizing The process of finalizing can be carried out in two different ways e Select DISC MENU and then FINALIZE from the Setup Menu e Select FINALIZE on the REC CONTROL panel when this is being used for recording Setup Procedure Insert the disc to be finalized 1 If using the Setup Menu 1 If using the REC CONTROL panel Press the SET UP button to Select FINALIZE and then press eu display the Setup Menu and the keyboard s Enter key Ee Se then select DISC MENU If operating using a mouse left Set FINALIZE from the DISC click the FINALIZE button MENU screen to EXECUTE and then press the SET button 000 min DISC MENU Di Li FINALIZE button REC 04 05 04 TITLE 1 0 11 22 11 20 00 CHAPTER 1 0 11 22 The screen that will now be displayed depends on the setting of EDIT MENU from the SYSTEM MENU screen If this is set to DISABLE a screen seeking confirmation of If this is set to ENABLE a screen for editing title menus will finalizing will appear appear Use this screen to confirm that the title menu is as In this case perform finalizing as described below required to modify the display style and to input title names es Page 53 2 Make the appropriate selection in the confirmation screen Confirmation screen Select YES and then press the SET button to co
147. umbnail to be used for the second chapter Thumbnails can be selected using the and buttons found on this screen f you select and press the SET button the image recorded after the selected thumbnail will be displayed Each time the SET button is pressed a subsequent image will be displayed Image after 15 frames e f you select and press the SET button the image recorded before the selected thumbnail will be displayed Each time the SET button is pressed a previous image will be displayed 3 Select BACK and press the SET button to change that chapter s thumbnail The initial THUMBNAIL EDIT screen is displayed once again The thumbnail for the second chapter will have changed to that just selected THUMBNAIL EDIT TITLECLOSE ei H TE AAA BBBB ccc 1 2 3 DDD EEE FFF 4 5 6 CHAPTER MENU TEXT LOAD Thumbnail of the title menu will be the top thumbnail of the chapter menu Use the following procedure to confirm that thumbnails are as desired by displaying them in full screen mode For example let s look at the thumbnail for the second chapter 1 Select the second chapter and press the SET button e The thumbnail screen for this chapter will be displayed 2 Select PREVIEW and then press the SET button e The thumbnail image for this chapter will be displayed in full screen mode 3 Select BACK and press the SET
148. us Messages E To display status messages Set DISPLAY from the DISPLAY MENU screen to ON E The various items of status information for display can be selected E if DISPLAY is set to OFF no status information will be displayed Data relevant to recording If the SET UP button is pressed while in Recording mode the video bit rate setting and the audio encoding format will be displayed If the SET UP button is then pressed once again this information is removed from the screen 000 min TITLE 1 0 11 22 CHAPTER 1 0 11 22 Description This area indicates the DVD recorder s current mode of operation Use RECORDER MODE from the DISPLAY MENU screen to indicate whether or not this is to be displayed The DVD recorder currently contains no disc The current disc is being ejected Operate Off mode Stop mode Recording mode Recording Pause mode Playback mode Still mode Fast forward play at 3 times normal speed Fast forward play at 15 times normal speed Fast reverse play at 3 times normal speed Fast reverse play at 15 times normal speed SLOW FWD 0 50 SLOW FWD 0 06 SLOW REV 0 50 SLOW REV 0 06 Adisc is being loaded Slow forward play at 0 5 times normal speed Slow forward play at 0 06 times normal speed Slow reverse play at 0 5 times normal speed Slow reverse play at 0 06 times normal speed Status Messages continued Title number Chapter number Counter Status Mes
149. utton e The DVD recorder enters Still mode eh the PAUSE button is then pressed again in Still mode the DVD recorder will advance playback by a single frame 5 Restart playback Press the PLAY button E The DVD recorder will behave as follows when title playback has ended These actions will depend on the setting made for TITLE END from the RECORDER MENU 2 2 screen during recording TITLE END SETTING made during recording MENU REPEAT The DVD recorder enters Stop mode and displays the title Repeat playback is carried out within the title menu 6 Stop playback This is done by pressing the STOP button e The DVD recorder enters Stop mode 57 Downloaded From DvDPlayer Manual com JVC Manuals Playback Fast amp Slow Playback CC EE OPTION DV Y C LINE DVD RECORDER BD X200 TITLE CHAPTER EEFTEETEEIT PHONES REV mr PLAY FWD PAUSE REC d MENU III EI WT OO REV button FWD button Fast Forward amp Fast Reverse Play Slow Forward amp Slow Reverse Play E Fast forwarding E Slow forwarding e Press the FWD button during playback or fast reverse play e Press the FWD button in Still mode or during slow reverse to start fast forward play play to start slow forward play If pressed again during fast forward play this button toggles If pressed again during slow forward play this button togg
150. utton moves the selection position downward e The W button can be used to adjust the audio recording levels when the DVD recorder is stopped or in Recording Pause mode If AUDIO REC VOLUME MODE from the RECORDER MENU 2 2 screen is set to BOTH and this button is pressed while either the lt or gt button is being held the audio recording levels for both Channel 1 and Channel 2 will decrease lf AUDIO REC VOLUME MODE from the RECORDER MENU 2 2 screen is set to INDEPENDENCE and this button is pressed while the lt button is being held the audio recording level for Channel 1 will decrease Similarly if the W button is pressed while the button is being held the audio recording level for Channel 2 will decrease Downloaded From DvDPlayer Manual com JVC Manuals Al button e f a title menu or chapter menu is displayed this button can be used to select a menu number for playback Specifically pressing of this button moves the selection position to the left e This button can be pressed while the DVD recorder is playing to move playback to the start of the current chapter e The lt button can be used to adjust the audio recording levels when the DVD recorder is stopped or in Recording Pause mode e If AUDIO REC VOLUME MODE from the RECORDER MENU 2 2 screen is set to INDEPENDENCE and either the A or Y button is pressed while this button is being held the audio recording level for Channel 1 will be adjusted accord
151. vals A Setting the Optimum Bit Rate Ss ADJUST can be used to set the optimum bit rate i e the amount of data per SR EE second for the remaining space on a disc based on the recording time or duration h m s f h m s f 1 00 00 00 00 2 00 15 00 00 00 25 00 00 00 30 00 00 between the In Point and the Out Point Chou uso ess e DISC REMAIN displays an estimate of the available space for recording on the ADI BMAATE 8 0 Mbps 01SC REMAN 000 min current disc em E DS e BIT RATE displays the current bit rate setting To set the bit rate that best suits the remaining disc capacity select ADJUST and then press the SET button ADJUST 4 Ending the Record Process SE SEVEN M If you intend to play the recorded disc on this DVD recorder or on another player KSE RE BRECH select FINALIZE and press the SET button 00000000 z 00150000 Once finalizing has been carried out no addition recordings can be made on 4 00 25 00 00 5 00 30 00 00 6 00 00 40 00 00 8100450000 2 00 50 the disc EE E To remove the recorded disc from your BD X200 press the OPEN CLOSE button roe ee RAE on the front
152. within that set for the total content REGION CODE REGION CODE An attempt was made to play a disc for which a region code has been set OVERHEATING OVERHEATING Displayed when the internal temperature of the set rises due to fan malfunction etc In this case immediately turn off the power and discontinue use The power will automatically shut down in about 20 minutes after the OVERHEATING display CAUTION If alarm messages such as INVALID DISC are displayed several times when a disc recorded using the BD X200 or a blank disk is inserted there is a possibility that the disc itself has been damaged In such a case the damaged disc should be replaced with a new one If the alarm messages continue to appear after replacing the disc the problem may lie within the DVD recorder and in such a case you are recommended to contact either the store where this BD X200 was purchased or your nearest JVC authorized dealer 20 Downloaded From DvDPlayer Manual com JVC Manuals Preparation Signal Connections E Audio and video signals Video outputs for VCR BY Note 1 ho Input DV Composite Audio outputs for VCR Monitor or TV YC separate A Note 2 om nut Analog audio DV Composite Analog audio Note 3 AUDIO OUT Headphones sa a PHONES DV IN OUT i 4 on front panel Stereo O AUDIO IN Note 1 The video signal for input is se
153. y of elapsed and remaining title playback time in the counter area Note The remaining disc and title time depend on the amount of data comprising video and for this reason they should be taken as being a general indication and not an exact figure 14 Downloaded From DvDPlayer Manual com JVC Manuals TITLE CHAP LPCM Description Bindication of the current operating mode PLEASE WAIT The DVD recorder is starting up OPERATE OFF The DVD recorder is preparing to shut down NO DISC The DVD recorder currently contains no disc LOADING A disc is being loaded into the DVD recorder DVD R The current disc is a non finalized DVD R Approximately 3 seconds DVD RW The current disc is a non finalized DVD RW Approximately 3 seconds DVD The current disc is a finalized DVD R or DVD RW Approximately 3 seconds REC PAUSE The DVD recorder is switching from Recording mode to Recording Pause mode REC STOP The DVD recorder is switching from Recording mode to Stop mode MENU EDIT A title menu or chapter menu is currently being edited EJECT The current disc is being ejected TITLE CLOSE The DVD recorder is performing title close processing FINALIZE The DVD recorder is finalizing the disc ERASE The DVD recorder is erasing data from a DVD RW disc TOP MENU The disc s top menu is being played MENU Amenu is being played ENCODING XX Encoded video is bei
154. yer Manual com JVC Manuals Using a Keyboard amp Mouse to Control Recording BD X200 recording operations can be carried out using the REC CONTROL panel displayed on the monitor In addition a keyboard and mouse can also be used when working with this panel Notes e DISC TITLE from the REC CONTROL REMOTE MENU screen REMOTE MENU REMOTE SELECT REC CONTROL REM FF REW MODE 9PIN MASTER FF REW 000 min Le Cr Cu REC TITLE 1 0 11 22 CHAPTER 1 0 11 22 04 05 04 11 20 00 REC CONTROL panel panel can be selected to allow a name to be input for the disc This type of name proves useful when managing discs using a PC Note that disc names are not displayed on the monitor or the DVD recorder Characters allowed for the disc title are alphanumerical characters and underscore _ only Space and other symbols may not be used FINALIZE and DISC TITLE from the REC CONTROL panel cannot be used while recording The Record button from the REC CONTROL panel can be activated or clicked to insert chapter marks and thumbnails during recording Le Downloaded From DvDPlayer Manual com JVC Manuals Signal Connections Connect a keyboard and mouse to the USB terminals on the back of the DVD recorder e If the REC CONTROL panel is to be displayed on screen set REC CONTROL from the REMOTE MENU screen to ON This panel will be displayed in
155. you eject the disc at this time e The power will turn on the color of the OPERATE indicator 7 Press the OPERATE button will change to green and the DVD recorder will become e The DVD recorder will adopt Operate Off mode and the ready for use Operate On mode color of the OPERATE indicator will change to red Note 2 Ifthe DVD recorder will not be used for an extended A period of 45 seconds may pass before the DVD recorder period of time disconnect the AC adaptor adopts Op rate Ori mode as it prepares for operati n e Before disconnecting the AC adaptor be sure to remove the power cord from the electrical outlet Notes e Pressing the OPERATE button will have no effect in Recording mode or Recording Pause mode e Pressing this button also has no effect during finalizing erasing and dubbing 24 Downloaded From DvDPlayer Manual com JVC Manuals Inserting amp Removing Discs Disc tray OPERATE E R RW BUSY OPEN CLOSE o am ch TITLE DVD RECORDER BD X200 CHAPTER SESCH OPTION DN Y C LINE OPEN CLOSE indicator OPEN CLOSE button EEFEEETETX TOP REV STOP PLAY PAD PAUSE REC Gd MENU D D D Il 00 r PHONES Inserting a Disc E Press the OPERATE button to activate Operate On mode 1 Press the OPEN CLOSE button e The disc tray will open automatically While the disc tray is open

JVC BD-X200U User Guide Manual - DVDPlayer

Contents

Download Pdf Manuals

Related Search

Related Contents