ELATION PLATINUM SPOT 35 PRO USER MANUAL VERSION 1
Contents
1. LAMP CONTROL Automatic Lamp ON OFF When ON lamp is automatically powered ON when power is applied to fixture LAMP CONTROL Lamp ON via DMX When ON lamp can be powered ON via a DMX controller LAMP CONTROL Lamp OFF via DMX When ON lamp can be powered OFF via a DMX controller LAMP CONTROL Lamp ON at Temp The fixture is designed to shut the lamp OFF when an excessive temperature is sensed inside the head by the on board CPU The lamp is shut OFF to prevent damage to the lamp and avoid possible internal damage to the fixture head This function sets the MIN internal operating temperature of the fixture head before the lamp will restrike after the lamp has been automatically shut OFF LAMP CONTROL Lamp OFF at Temp The fixture is designed to shut the lamp OFF when an excessive temperature Is sensed inside the head by the on board CPU The lamp is shut OFF to prevent damage to the lamp and avoid possible internal damage to the fixture head This function sets the MAX internal operating temperature of the fixture head when the lamp will automatically be shut OFF US WHEN THE TEMPERATURE AROUND THE LAMP IS HIGHER THAN THE PRESET VALUE CONTINUOUSLY FOR UP TO 5 MINUTES THE LAMP WILL SHUT OFF AUTOMATICALLY WHEN THIS HAPPENS YOU CANNOT RE STRIKE THE LAMP AGAIN AUTOMATICALLY YOU MUST RE STRIKE THE LAMP MANUALLY 28 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com PERSONALITY Status2. 507mm Vertical Height 28 6 727mm Weight 79 0 lbs 36 kg ELECTRICAL THERMAL AC 100 240V 50 60Hz 1 200W Max Power Consumption 14 F to 113 F 10 C to 45 C APPROVALS RATINGS CE cETLus RoHs IP20 C US Intertek 3104374 Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 47 PLATINUM SPOT 35 PRO User Manual Version ATION www elationlighting com COLORS amp GOBOS Not To Scale For Illustrations Purposes Only Subject To Change Without Notice COLOR WHEEL 1 BLUE GREEN YELLOW ORANGE PINK C T B Lang 1 Pos 2 Pos 3 Pos 4 Pos 5 Pos 6 Aa 7 Pos 8 COLOR FLAGS CYAN MAGENTA YELLOW C T O ROTATING INTERCHANGEABLE GOBO WHEEL 1 OD 28 8mm ID 25mm ID 24mm ID 24mm ID 24mm ID 24mm ID n a Pos 1 Pos 2 Pos 3 Pos 4 Pos 5 Pos 6 ROTATING INTERCHANGEABLE GOBO WHEEL 2 OD 28 8mm DODOA ID 25mm ID 24mm ID 24mm ID 24mm ID 24mm ID 24mm Pos 1 Pos 2 Pos 3 Pos 4 Pos 5 Pos 6 IMPORTANT NOTICE REGARDING GOBO DIMENSIONS AND CUSTOM GOBOS OD Outside Diameter ID Image Diameter Due to varying manufacturing processes it is highly recommended fo provide a gobo and holder sample from the fixture to 3rd party custom gobo vendors for accurate sizing Please Note Specifications and improvements in the design of this unit and th
3. 35 PRO when in the 41 Channel Extended Mode you should set the starting DMX address of the first unit to 1 the second unit to 42 1 41 the third unit to 83 42 41 and so on Note During start up the PLATINUM SPOT 35 PRO will automatically detect whether a DMX data signal is being received or not If DMX data signal is being received the display will show Addr XXX XXX representing the actual DMX address If the fixture is not receiving a DMX signal the display will flash If your fixture is connected to a DMX controller and the display is flashing not receiving a DMX signal please check the following The 3pin or Spin XLR input plug cable with DMX signal from controller is not connected or is not inserted completely into the DMX input jack of the fixture The DMX controller is switched off or defective The DMX cable or connector is defective A DMX terminator has been inserted into the last fixture in your DMX chain 23 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com FIXTURE MENU ON BOARD SYSTEM MENU The PLATINUM SPOT 35 PRO comes with an easy to navigate system menu The next section will detail the functions of each command in the system menu LCD MENU CONTROL PANEL The control panel see image below located on back of the fixture allows you to access the main menu and make all necessary adjustments to the PLATINUM SPOT 35 PRO During normal operation pressing MODE E
4. HOT NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE SENSITIVE PERSONS MAY SUFFER AN EPILETIC SHOCK e For proper operation follow the Installation guidelines described in this manual Only qualified and certified personnel should perform installation of this fixture and only the original rigging parts brackets included with this fixture should be used for installation Any modifications will void the original manufactures warranty and increase the risk of damage and or personal injury e Never look directly into the light source of this fixture to prevent risk of injury to your retina which may induce blindness Those suffering from EPILEPSY should avoid looking directly into the light source of this unit at all times e The fan and air inlets must remain clean and never blocked Allow approx o 15cm between this fixture and other devices or a wall for proper cooling e Always disconnect from main power source before performing any type of service and or cleaning procedure Only handle the power cord by the plug end never pull out the plug by tugging the wire portion of the cord e Do not operate this fixture if the power cord has become frayed crimped and or damaged If the power cord is damaged replace it immediately with a new one of similar power rating 7 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com GENERAL GUIDELINES NEVER OPEN THIS FIXTURE WHILE IN USE During the initial operation of this fi
5. Set To Slave Define fixture slave mode Slavel Slave2 Slave3 FUNCTION Auto Program Define fixture mode Master or Alone for running Auto Programs Select desired internal programs under Select Program set the number of steps under Edit Program and edit individual scenes under Edit Scenes 26 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com FUNCTION Sound Control Define fixture mode Master or Alone for running Auto Programs via sound activation default is Master INFORMATION Time Information Current Time Displays fixture run time from last power ON The counter is reset after each time the fixture is powered OFF INFORMATION Time Information Total Run Hours Displays fixture total run time INFORMATION Time Information Last Run Hours Displays fixture run time for a given period of time i e rental period This counter can be reset INFORMATION Time Information Lamp Hours Displays lamp total run time This counter should be reset at each lamp change INFORMATION Time Information Lamp Off Time Displays lamp run time from the last power ON This counter is automatically reset after each time the lamp is powered ON INFORMATION Time Information LastRun Password Display the fixture timer password 038 INFORMATION Time Information Clear Last Run Resets the last run time of the fixture INFORMATION T
6. a flat surface set shutter and dimmer channels to a value of 255 2 Focus spot on a flat wall or similar area so a clear view of light output can be seen 3 Center the hot spot of the lamp brightest part of the beam using the 3 adjustment screws located under the rear cover plate labeled A B and C see image below Turn one screw ata time to move the hot spot diagonally across the projected image If you cannot detect a hot spot adjust the lamp until the light is even 4 Toreduce a hot spot pull the lamp in by turning all 3 adjustment screws clockwise a 1 4 turn ata time until the light is evenly distributed Lamp Q i T Lamp Adjustment Screws 16 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com FIXTURE INSTALLATION FLAMMABLE MATERIAL WARNING Keep fixture at least 5 0 ff 1 5m away from any flammable materials decorations pyrotechnics etc ELECTRICAL CONNECTIONS A qualified electrician should be used for all electrical connections and or installations L3 CAUTIONS For added protection mount the fixture in areas outside walking paths seating areas or in areas were unauthorized personnel might reach the fixture Ambient operating temperature range for this fixture is 14 to 113 F 10 to 45 C Do not use the fixture under or above th
7. hand during its operation Turn OFF the power and allow approximately 15 minutes for the fixture to cool down before replacing or serving 8 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com DISCHARGE LAMP WARNING This fixture is fitted with a DISCHARGE LAMP which is highly susceptible to damage if improperly handled NEVER touch the lamp with your bare hands as the oil from your hands will shorten the life of the lamp Also NEVER move the fixture until the lamp has had ample time to cool Lamps are NOT covered under warranty conditions Avoid switching the fixture ON and OFF repeatedly in short intervals as this will reduce lamp life and intensity To achieve the intensity associated with discharge lamps these lamps use gas sealed in a high pressure environment to emit a brilliant output i Due to the high pressure involved with the construction of the lamp the lamp MAY EXPLODE DURING PROLONGED EXTENSIVE USE This risk is increased with age added care is encouraged when dealing with older lamps Thus the lamp must always be replaced at the end of their recommended duty cycle Extreme caution should be used when operating this or any fixture fitted with a gas discharge lamp UV RADIATION NOTICE This fixture emits intense UV radiation which is harmful to the eyes and skin The intense luminance of the lamp can cause severe damage to the retina NEVER operate this fixture with ANY of the protective co
8. malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB The Focus movement is not located in the default position after the reset This message will appear after the reset of the fixture reset if the magnetic indexing circuit malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB The Iris movement is not located in the default position after the reset This message will appear after the reset of the fixture reset if the magnetic indexing circuit malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB The Zoom movement is not located in the default position after the reset This message will appear after the reset of the fixture reset if the magnetic indexing circuit malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB The Animation movement is not located in the default position after the reset l This message will appear after the reset of the fixture reset if the magnetic indexing Animation Er Se Ur circuit malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB 45 PLATINUM SPOT 35 PRO User
9. of the fixture reset if the magnetic indexing circuit Color Wheel Er malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB The Color Flag is not located in the default position after the reset Magenta This message will appear after the reset of the fixture reset if the magnetic indexing circuit Color Wheel Er malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB The Color Flag is not located in the default position after the reset Yellow This message will appear after the reset of the fixture reset if the magnetic indexing circuit Color Wheel Er malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB The Color Flag is not located in the default position after the reset CTO This message will appear after the reset of the fixture reset if the magnetic indexing circuit Color Wheel Er malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB The Color Wheel is not located in the default position after the reset This message will appear after the reset of the fixture reset if the magnetic indexing circuit malfunctions sensor failed or magnet is missing or there is a stepper motor failur
10. position then carefully pull the lamp out from the fixture towards you e ym rlampinstallation be sure to lte a E l 13 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com LAMP INSTALLATION PROCEDURE continued 3 Carefully insert the new lamp into the fixture aligning the 2 gold pins on the lamp base with the OPEN position Le e proper lamp installation be sure to align the lar 9D wit the lock ine ww 14 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com LAMP INSTALLATION PROCEDURE continued 4 Grab the base of the newly installed lamp and turn it from the OPEN position clockwise to the LOCK position making sure the lamp is securely installed LOCK POSITION instalation be sure to alia ie C 5 Close rear cover plate and tighten screw clockwise Ta 45 C We T 130 C pi CAUTION HOT LAMP Let the lamp cool down for 10 min LAMP MSR Platinum 35 Lamp adjustment can be accessed by loosening the quick lock screw above to open the external cover and thenturn the screws A B C to adjust the lamp to accurate position Lamp MUST BE replaced at 750 Hours Use only Genuine Original Philips ptetirum lamps Other wang lompe may cause damage snd vod warranty A 28 15 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com LAMP OPTIMIZATION 1 Place fixture on
11. the DMX data instructions to the fixture allowing the user to control the different aspects of an intelligent light DMX data is sent out as serial data that travels from fixture to fixture via data IN and data OUT XLR terminals located on the fixtures most controllers will only have output jacks DMX LINKING To ensure proper DMX data transmission always use proper DMX cables and a terminator When using several DMX fixtures try to use the shortest cable path possible Never split a DMX line with a Y style connector The order in which the fixtures are connected in a DMX line does not influence the DMX addressing For example a fixture assigned a starting DMX address of 1 may be placed anywhere in the DMX chain at the beginning at the end or anywhere in the middle The DMX controller knows to send data assigned to address to that fixture no matter where it is located in the DMX chain The PLATINUM SPOT 35 PRO can be controlled via DMX 512 protocol and the DMX address is set via the control menu DATA CABLE DMX Cable REQUIREMENTS For DMX and Master Slave Operation Your fixture and your DMX controller require a standard 3pin or Spin XLR connector for data input and data output see figure below If you are making your own cables be sure to use two conductor shielded digital DMX cable rated at 120 ohms this cable is designed for DMX transmission and may be purchased from your Elation dealer or at most professional ligh
12. 8 EW Kerkrade Netherlands 31 45 546 85 66 31 45 546 85 96 fax www elationlighting eu info elationlighting eu DOCUMENT VERSION lw Please check www elationlighting com for the latest revision update of this manual 5 pleat DMX ocument soriware Channel Modes Version Version 5 2015 27 29 41 Updated manual format 2 PLATINUM SPOT 35 PRO User Manual Version 1 CONTENTS General Information Warranty safety Instructions General Guidelines Discharge Lamp Warning Fixture Overview Lamp Installation Instructions Fixture Installation Understanding DMX Fixture Menu WDMX Internal Wireless DMX Receiver Set Up DMX Channel Functions And Values Error Codes Cleaning and Maintenance Technical specifications Optional Accessories 3 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com 17 20 24 35 37 www elationlighting com ENERAL INFORMATION INTRODUCTION Congratulations you have just purchased one of the most innovative and reliable lighting fixtures on the market today This fixture has been designed to perform reliably for years when the guidelines in this booklet are followed Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit These instructions contain important information regarding safety during use and maintenance UNPACKING Every unit has been thoroughly tested and has been shi
13. ANTY REGISTRATION Please fill out the enclosed warranty card to validate your purchase All returned service items whether under warranty or not must be freight pre paid and accompany a return authorization NA number The R A number must be clearly written on the outside of the return package A brief description of the problem as well as the R A number must also be written down on a piece of paper and included in the shipping container If the unit is under warranty you must provide a copy of your proof of purchase invoice Items returned without a R A number clearly marked on the outside of the package will be refused and returned at customer s expense You may obtain a R A number by contacting customer support IMPORTANT NOTICE US There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures warranty Damages resulting from modifications to this fixture and or the disregard of safety and general user instructions found in this user manual void the manufactures warranty and are not subject to any warranty claims and or repairs 5 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com LIMITED WARRANTY A Elation Professional amp hereby warrants to the original purchaser Elation Professional amp products to be free of manufacturing defects in material and workmanship for a period of two years 730 days and Elation Professional amp prod
14. C STAND EXTEND WEE LAMP ON OFF RESET INTERNAL PROGRAMS 200 219 Internal Program 6 41 48 220 239 Internal Program 7 Scene 49 56 240 255 Music Control Scene of Program 1 42 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com ERROR CODES When power is applied the unit will automatically enter a Reset Test mode This mode brings all the internal motors to a home position If there is an internal problem with one or more of the motors an error code will flash in the display in the form of XXer were as XX will represent a function number For example when the display shows QEr it means there is some type of error with the Pan motor If there are multiple errors during the start up process they will all flash in the display For example if the fixtures has errors on Channel 1 2 and 5 all at the same time you will see the error message 01Er 02Er and 05Er flash repeated 5 times f an error does occur during the initial start up procedure the fixture will self generate a second reset signal and try to realign all the motors and correct the errors If the error persists affer a second attempt a third attempt will be made If after a third attempt all the errors have not been corrected the fixture will make the following determinations e 3 or More Errors The fixture cannot function properly with three or more errors therefore the fixture will place itself in a sta
15. Clockwise Rotation from FAST to SLOW NO Rotation Counterclockwise Rotation from SLOW to FAST a Les CMY amp COLOR WHEEL MACRO SPEED 0 255 MAX to MIN Speed HR IRIS 0 191 MAX to MIN Diameter m beer 192 223 Pulse Opening FAST to SLOW 224 255 Pulse Closing SLOW to FAST BR 40 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com ELATIONO PLATINUM SPOT 35 PRO DMX Channel Values Functions VERSION 1 41 DMX Channels specifications are subject to change without any prior written notice Rotation direction Clockwise or Counterclockwise of COLOR GOBO and PRISM effects depends on orientation of the fixture head MODE CHANNEL VALUE FUNCTION BASIC STAND EXTEND MAN UU CMY amp COLOR WHEEL MACROS m Color Macro I s RH PAN TILT MOVEMENT SPEED 0225 220 MAX to MIN Speed FN 239 Blackout by Movement Eu 245 Blackout by ALL Wheel Changing Er 255 NO Function ga PAN TILT MOVEMENT MODE 0 31 3 Quick E 63 smooth 64 E n NO Function co O Al PLATINUM SPOT 35 PRO User Manual Version www elationlighting com ELATIONO PLATINUM SPOT 35 PRO DMX Channel Values Functions VERSION 1 41 DMX Channels specifications are subject to change without any prior written notice Rotation direction Clockwise or Counterclockwise of COLOR GOBO and PRISM effects depends on orientation of the fixture head MODE CHANNEL VALUE _ eg BASI
16. ELATION PLATINUM SPOT 35 PRO User manual NOILW13 wOUd SE LOdS WNANILV1d UDUU Jos www elationlighting com 2014 ELATION PROFESSIONAL all rights reserved Information specifications diagrams images and instructions herein are subject to change without notice ELATION PROFESSIONAL logo and identifying product names and numbers herein are trademarks of ELATION PROFESSIONAL Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged All non ELATION brands and product names are trademarks or registered trademarks of their resoective companies ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all liabilities for property equipment building and electrical damages injuries to any persons and direct or indirect economic loss associated with the use or reliance of any information contained within this document and or as a result of the improper unsafe insufficient and negligent assembly installation rigging and operation of this product Elation Professional USA 6122 S Eastern Ave Los Angeles CA 90040 323 582 3322 323 832 9142 fax www elationlighting com info elationlighting com Elation Professional B V Junostraat 2 646
17. Elation Professional amp factory unless prior written authorization was issued to purchaser by Elation Professional if the product is damaged because not properly maintained as set forth in the product instructions guidelines and or user manual D This is not a service contract and this warranty does not include any maintenance cleaning or periodic check up During the periods as specified above Elation Professiondl will replace defective parts at its expense and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship The sole responsibility of Elation Professional under this warranty shall be limited to the repair of the product or replacement thereof including parts at the sole discretion of Elation Professional All products covered by this warranty were manufactured after January 1 1990 and bare identifying marks to that effect E Elation Professional reserves the right to make changes in design and or performance improvements upon its products without any obligation to include these changes in any products theretofore manufactured F No warranty whether expressed or implied is given or made with respect to any accessory supplied with the products described above Except to the extent prohibited by applicable law all implied warranties made by Elation Professional amp in connection with this product including warranties of merchantability or fitness are limited in dur
18. L VALUE FUNCTION E gt gt ROTATING PRISM PRISM GOBO MACROS 12 14 21 Gobo Maco 248 255 Gobo Macro 16 a ROTATING PRISM INDEX ROTATION 0 127 Prism Indexing 13 15 22 128 189 Clockwise Prism Rotation from FAST to SLOW 190 193 NO Rotation 194 255 Counterclockwise Prism Rotation from SLOW to FAST ROTATING PRISM FINE INDEX ROTATION E 0 255 Prism FINE Indexing FOCUS 14 16 24 0 255 Continuous Adjustment from NEAR to FAR op FOCUS FINE 0 255 Continuous FINE Focus Adjustment KOKO R74 DW 4O1 e e ZE E 0 255 ZOOM Adjustment from SMALL to BIG MOTORIZED ZOOM FINE ge a 0 255 ZOOM FINE Adjustment Ed AUTO FOCUS Auto Focus OFF 16 18 29 16 31 5m 32 47 7 5m 49 255 10m AUTO FOCUS FINE 17 19 29 Continuous FINE Auto Focus Adjustment 0 255 39 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com ELATIONO PLATINUM SPOT 35 PRO DMX Channel Values Functions VERSION 1 41 DMX Channels specifications are subject to change without any prior written notice Rotation direction Clockwise or Counterclockwise of COLOR GOBO and PRISM effects depends on orientation of the fixture head EE O O UTTER STROBE DIMMER INTENSITY 0 255 Intensity O to 100 DIMMER INTENSITY FINE 255 Dimmer Intensity FINE Adjustment IRIS FINE 0 255 Iris FINE Adjustment 0 127 OPEN 128 255 100 Frost EO WHEEL OPEN 36
19. Manual Version 1 www elationlighting com CLEANING AND MAINTENANCE C A U T O N Disconnect power before cleaning or maintenance CLEANING Frequent cleaning is recommended to insure proper function optimized light output and an extended life The frequency of cleaning depends on the environment in which the fixture operates damp smoky or particularly dirty environments can cause greater accumulation of dirt on the fixture s optics e Clean the external lens surface at least every 20 days with a soft cloth to avoid dirt debris accumulation e Never use alcohol solvents or ammonia based cleaners MAINTENANCE Regular inspections are recommended to insure proper function and extended life There are no user serviceable parts inside this fixture please refer all other service issues to an authorized Elation service technician Should you need any spare parts please order genuine parts from your local Elation dealer Please refer to the following points during routine inspections e A detailed electric check by an approved electrical engineer every three months to make sure the circuit contacts are in good condition and prevent overheating e Be sure all screws and fasteners are securely tightened at all times Lose screws may fall out during normal operation resulting in damage or injury as larger parts could fall e Check for any deformations on the housing color lenses rigging hardware and rigging points cei
20. SC button once will access the fixture s main menu Once in the main menu you can navigate through the different functions and access the sub menus with the UP DOWN RIGHT and LEFT buttons Once you reach a field that reguires adjusting press the ENTER button to activate that field and use the UP and DOWN buttons to adjust the field Pressing the ENTER button once more will confirm your setting You may exit the main menu at any time without making any adjustments by pressing the MODE ESC button NOTE To access the LCD Menu Control Display via the internal battery press and hold the DC SWITCH button for 2 seconds The LCD Menu Control Display will shut OFF automatically about 1 minute from the last button press To shut OFF the LCD Menu Control Display immediately set Reset Default menu option to ON in the Personality menu and press the ENTER button to confirm your selection PLATINUM SPOT BG PRO gt 24 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com O SR NO SPOT 35 PRO SYSTEM MENU VERSION 1 Specifications and features are subject to change without any prior written notice MAIN MENU SUBMENU OPTIONS VALUES Default Settings in BOLD DESCRIPTION DMX Value FUNCTION Clear Fixture Last Run Time RE RE Password Software Version SS SS EE 68 174 F 13 F status Settings PERSONALITY Key Lock ON OFF Key Lock Temperature C F Celsius Fahrenheit Tem
21. Settings Address Via DMX Define desired DMX address via an external controller PERSONALITY Status Settings Address Via DMX When ON define the desired DMX address via an external controller 1 Connect the fixture to the external controller and power ON 2 Set the DMX value of Channel 1 on the controller to 7 3 Set the DMX value of Channel 2 on the controller to 7 or 8 When set to 7 the DMX address can be set between 1 and 255 When set to 8 the DMX address can be set between 256 and 511 4 Using Channel 3 on the controller set the desired DMX address of the fixture Example 1 If the desired DMX address is 57 set Channel 1 to a value of 7 set Channel 2 to a value of 7 and then set Channel 3 fo a value of 57 Example 2 If the desired DMX address is 420 set Channel 1 to a value of 7 set Channel 2 to a value of 8 and then set Channel 3 to a value of 164 256 164 420 5 After setting Channel 3 to the desired DMX address value wait for approximately 20 seconds for the fixture to complete the address reset function PERSONALITY Status Settings Pan Reverse When ON all PAN movements are reversed inverted PERSONALITY Status Settings Tilt Reverse When ON all TILT movements are reversed inverted PERSONALITY Status Settings Pan Degree select desired maximum degree of the Pan movement PERSONALITY Status Settings Feedback When ON the fixture auto
22. Turn ON Wireless DMX Act amp Data Out Turn ON Wireless DMX and send DMX data to wired 3 5pin outputs Clean WDMX Memo Clear WDMX memory When the WDMX system is Activated the internal DMX IN XLR jacks are OFF However the internal DMX OUT XLR jacks will function normally If the fixture is powered ON with the internal WDMX system Activated it will automatically scan for a wireless DMX signal from an Elation Wireless Transmitter IEY If NO wireless signal is received it will electronically switch to the wired DMX mode WARNING NEVER connect a fixture to a controller via a DMX cable when the WDMX system is in use This could cause serious damage to the controller SETTING UP THE WDMX SYSTEM Follow the instructions included with the Elation EWDMX Transmitter and connect it to the output of your DMX controller To sync your fixture with the Elation EWDMX Transmitter follow the steps below e Initially the Wireless Indicator on the fixture control panel should be solid RED e Press and hold the configuration button on your EWDMX Transmitter for about 3 seconds The RED GREEN LED indicators on the EWDMX Transmitter and the fixture should begin to flash rapidly for about 5 10 seconds while the two systems pair e Once the fixture is paired with the EWDMX Transmitter Tl the Wireless status indicators on the both the fixture and the EWDMX Transmitter will stop flashing and glow solid GREEN If paring is unsucce
23. ation to the warranty periods set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall apply to this product after said periods have expired The consumer s and or dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circumstances shall Elation Professional be liable for any loss and or damage direct and or consequential arising out of the use of and or the inability to use this product G This warranty is the only written warranty applicable to Elation Professional products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published 6 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com SAFETY INSTRUCTIONS This fixture is an extremely sophisticated piece of electronic equipment To guarantee a smooth operation it is important to follow the guidelines in this manual The manufacturer of this device will not accept responsibility for damages resulting from the misuse of this fixture due to the disregard of the information printed in this manual This device falls under PROTECTION CLASS 1 It s essential this device be grounded properly Only qualified personnel should perform all electrical connections KEEP THIS FIXTURE AWAY FROM RAIN AND MOISTURE UNPLUG POWER BEFORE SERVICING FIXTURE NEVER TOUCH FIXTURE DURING OPERATION AS IT MAY BE
24. e defective motor or defective motor IC drive on main PCB Color Wheel Er 44 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com ELATIONO PLATINUM 35 PRO ERROR CODES specifications and features are subject to change without any prior written notice ERROR CODE DESCRIPTION The Gobo Wheel 1 movement is not located in the default position after the reset Gobo Wheel 1 Er This message will appear after a fixture reset if the magnetic indexing Circuit malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB The Gobo Rot 1 movement is not located in the default position after the reset This Gobo Rot 1 Er message will appear after a fixture reset if the gobo wheel s magnetic indexing circuit malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB The Gobo Wheel 2 movement is not located in the default position after the reset This message will appear after a fixture reset if the magnetic indexing circuit Cope mace EEI malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB The Gobo Rot 2 movement is not located in the default position after the reset This Gobo Rot 2 Er message will appear after a fixture reset if the gobo wheel s magnetic indexing circuit
25. e the illustration below When mounting this fixture to truss be sure to secure an appropriately rated clamps to the included omega brackets using a M10 screw fitted through the center hole of the Omega Bracket Be sure to attach the included Safety Cable to the fixture using the safety cable rigging point integrated in the base assembly 2 CT AN Fe ee SAAR P eler we kel L eT lw eel lU 1 Omega holders 2 Clamp 3 Safety rope 4 Ouick lock fastener am a E i bc DN SLID En Jj AST 4 SECURING Regardless of the rigging option you choose for your PLATINUM SPOT 35 PRO always be sure to secure your fixture with a safety cable The fixture provides a built in rigging point for a safety cable on the hanging bracket as illustrated above Be sure to only use the designated rigging point for the safety cable and never secure a safety cable to a carrying handle 19 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com UNDERSTANDING DMX DMX 512 DMX is short for Digital Multiplex This is a universal protocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controllers DMX allows all makes and models of different manufactures to be linked together and operate from a single controller This is possible as long as all the fixtures and the controller are DMX compliant A DMX controller sends
26. ed 4 Program Selection for Edit Program Select Edit Program e Press ENTER to confirm Select Edit Program e Press ENTER to confirm Select the desired program You can edit specific scenes into a specific program e Press ENTER to confirm Press MODE ESC in order to return to the main menu 5 Automatic Scene Recording Select Edit Program e Press ENTER to confirm Select Edit Scenes Select desired scene numbers A maximum of 250 scenes can be programmed e Press ENTER to confirm Press MODE ESC in order to return to the main menu Example Program 2 includes scenes 10 11 12 amp 13 Program 4 includes scenes 8 9 amp 10 Program 6 includes scenes 12 13 14 amp 15 Auto Pro Part 1 is Program 2 Auto Pro Part 2 is Program 3 Auto Pro Part 3 is Program 6 The 3 Slave groups run the Auto Program in certain time segments See below Part 1 io seen newn tawn f Part 2 gwu Leen sew saws 1 Part 3 34 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com WDMX INTERNAL WIRELESS DMX RECEIVER SET UP The PATINUM SPOT 35 PRO is equipped with an internal Wireless DMX Receiver which is fully compatible with an Elation Wireless DMX System Access the Wireless DMX sub menu from the PERSONALITY menu and then select the desired WDMX connection function which includes WDMX Off Turn OFF Wireless DMX Activate WDMX
27. ess you are using an approved DMX splitter such as Elation s Opto Branch 4 Opto Branch 8 or DMX Branch 4 NN coo d GREEN UN Yr CT Set KI al at Wl P CT if aie SE iam het zA JA MW byn ua MW og a Li ee A w w Smt Or DMX512 CG CS OMX controller Address 1 Address 42 Address 83 IW N D Sn 120 Ohms 21 PLATINUM SPOT 35 PRO User Manual Version LATION www elationlighting com DMX 512 CONNECTION WITH DMX TERMINATOR A DMX terminator should be used in all DMX lines especially in longer runs The use of a terminator may avoid erratic behavior in your DMX line A terminator is a 120 ohm 1 4 watt resistor that is connected between pins 2 and 3 of a male XLR connector DATA and DATA This fixture is inserted in the female XLR connector of the last fixture in your daisy chain to terminate the line Using a line terminator will decrease the possibilities of erratic behavior l Termination reduces signal errors and NS avoids signal transmission problems l and interference It is always advisable VAD i to connect a DMX terminal Resistance WU d 120 Ohm 1 4 W between PIN 2 DMX Wn aS and PIN 3 DMX of the last fixture Fite 5pin XLR DMX CONNECTORS some manufactures use 5pin XLR connectors for DATA transmission in place of 3pin Spin XLR fixtures may be implemented in a 3pin XLR DMX line Whe
28. he DMX control board EFFECT ADJUST Manual Control select and manually test and fine adjust each individual channel function Independently from DMX control board This function will center PAN and TILT motors and set dimmer to 100 PAN and TILT functions will still operate if the fixture needs to be positioned to a flat clear surface With the individual functions you can focus the light on a flat surface wall and perform fine adjustments EFFECT ADJUST Calibration L ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION This function allows small adjustments to be made to the effect wheels Color Gobo Shutter etc to compensate for ware or in the event a sensor has been knocked slightly out of place Because improper use of this function can result in undesired operation this function has been password protected The password is 050 and must be entered each time the calibration menu function is entered Because calibration is an extremely delicate procedure instructions on performing this action are left out of this manual For a first time calibrator please contact our customer support team for step by step instructions 3 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com USER MODE SET User Mode select operating mode which includes DMX Channel and User defined modes USER MODE SET Edit User Mode Create user defined channel orders allowing the fixture to match the channe
29. ime Information LampTime Password Displays the lamp timer password 038 INFORMATION Time Information Clear Lamp Time Resets the run time of the lamp INFORMATION Temperature Information Head Temperature Displays temperature of the fixture INFORMATION Software Version Displays software version of the fixture 27 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com LAMP CONTROL When the actual temperature around the Lamp becomes higher than the preset value the Lamp will shut down within 5 minutes automatically e When the LCD menu displays Off restrike of the Lamp MUST be done manually e When the LCD menu displays Hot the actual temperature around the Lamp is still higher than the preset value and restrike of the Lamp is NOT possible e When the LCD menu displays the internal temperature with a lowercase letter c celsius or f fahrenheit the Lamp is ON but NOT at 100 full intensity e When the LCD menu displays the internal temperature with a capital letter C or F the Lamp is ON and at 100 FULL intensity LAMP CONTROL Lamp ON or OFF VS When ON manual control of lamp power can be accessed via system menu This menu item controls the LAMP ON OFF soffware command only Striking of the lamp via the system menu can only occur when the LAMP ON OFF is set fo ON and the actual temperature around the lamp is lower than the limited value
30. ing com LAMP SAFETY INSTRUCTIONS e ALWAYS replace lamp every 750 Hours e Use only Genuine Original Phillips Platinum 35 lamps Other brand lamps may cause damage and void the warranty e NEVER touch the lamp with your bare hands Oil from your hands will shorten the life of the lamp e Always disconnect the fixture s main power supply before replacing lamp e Allow fixture to cool for at least 15 minutes before attempting any type of service e Make sure ALL covers panels are replaced secured before operating the fixture to prevent any risk and or damage to eye retina from UV Radiation exposure LAMP INSTALLATION PROCEDURE 1 Place the fixture on a flat surface turn the center screw on the rear cover plate counterclockwise and pull panel door down to access the lamp mme GEA Te 130 C CAUTION HOT LAMP Let the lamp cool down for 10 min LAMP MSR Platinum 35 Lamp adjustment can be accessed by loosening the quick lock screw above to open the external cover and thenturn the screws A B C to adjust the lamp to accurate position Lamp MUST BE replaced at 750 Hours Use only Genuine Original Philips ptetirsum lamps Other wang lompe may cause damage snd vod warranty A Ne 2 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com LAMP INSTALLATION PROCEDURE continued 2 Grab the base of the installed lamp and turn it from the LOCK position counterclockwise to the OPEN
31. ion Clockwise or Counterclockwise of COLOR GOBO and PRISM effects depends on orientation of the fixture head MODE CHANNEL VALUE FUNCTION BASIC STAND EXTEND ROTATING GOBOS CONTINOUS ROTATION GOBO WHEEL 1 os M Bee 4 ROTATING GOBOS INDEX ROTATION GOBO WHEEL 1 0127 127 Gobo Indexing e 189 Clockwise Gobo Rotation from FAST TO SLOW ae 193 NO Rotation a Counterclockwise Gobo Rotation from SLOW to FAST ROTATING GOBOS FINE INDEX ROTATION GOBO WHEEL 1 255 Gobo Rotation FINE Indexing Fa ROTATING GOBOS CONTINOUS ROTATION GOBO WHEEL 2 Di OPEN 170 189 Gobo 6 Shake SLOW to FAST 190 221 Clockwise Gobo Wheel Rotation from FAST to SLOW 222 223 NO Rotation 224 Counterclockwise Gobo Wheel Rotation from SLOW to FAST ROTATING GOBOS INDEX ROTATION GOBO WHEEL 2 me a 127 Clockwise Gobo Rotation from FAST TO SLOW 190 193 194 i Counterclockwise Gobo Rotation from SLOW to FAST ROTATING GOBOS FINE INDEX ROTATION GOBO WHEEL 2 255 Gobo Rotation FINE Indexing 38 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com ELATIONO PLATINUM SPOT 35 PRO DMX Channel Values Functions VERSION 1 41 DMX Channels specifications are subject to change without any prior written notice Rotation direction Clockwise or Counterclockwise of COLOR GOBO and PRISM effects depends on orientation of the fixture head MODE CHANNE
32. is manual are subject to change without any prior written notice 48 PLATINUM SPOT 35 PRO User Manual Version 1 Ecariob www elationlighting com PHOTOMETRIC DATA o E UI wn 5m 7 5m 10m MIN ZOOM 7 ft mm ft Se ft Distance 5 16 4 7 5 24 6 10 32 8 joa CC ET SA TAT 15 Photometrics lux lux lux 50 Beam m 7 Sm 10m MAX ZOOM m ft m ft m ft Distance 5 16 4 yb 24 6 10 32 8 ww M2 P c an ain an a Photometrics lux lux lux DIMENSIONAL DRAWINGS 17 6 447mm 22 8 28 6 580mm j 727mm 27 8 707mm 19 0 356mm 482mm Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 49 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com OPTIONAL ACCESSORIES AC 3PDMX5PRO 5 ft 1 5m 3pin PRO DMX Cable AC5PDMX5PRO 5 ft 1 5m 5pin PRO DMX Cable Additional Cable Lengths Available 50 PLATINUM SPOT 35 PRO User Manual Version 1
33. is temperature Before mounting the fixture to any surface make sure the installation area can hold a minimum point load of 10 times the weight of the fixture Fixture installation must always be secured with a secondary safety attachment such ass an appropriate safety cable Never stand directly below the device when mounting removing or servicing 17 PLATINUM SPOT 35 PRO User Manual Version 1 ATION www elationlighting com MOUNTING POINTS e Overhead mounting requires extensive experience including amongst others calculating working load limits installation material being used and periodic safety inspection of all installation material and the device lf you lack these qualifications do not attempt the installation yourself Improper installation can result in bodily injury e Fixture is fully operational in the specific mounting positions as illustrated below NSS eS zz A E NN ss EE d a WL WALD AA XAA XA AS 2S Wy HEE I OC br goen g l gt SAFETY CABLE Always use a Safety Cable whenever installing this fixture in a suspended environment to ensure the fixture will not drop if the clamp fails 18 PLATINUM SPOT 35 PRO User Manual Version 1 Ecariob www elationlighting com CLAMP MOUNTING The PLATINUM SPOT 35 PRO provides a unique mounting bracket assembly that integrates the bottom of the base the included Omega Brackets x2 and safety cable rigging point in one unit se
34. l order of other fixtures on the market for easier operation A total of three user modes may be configured User Mode A User Mode B and User Mode C EDIT PROGRAM Select Program select one of the 10 user defined internal Auto Programs EDIT PROGRAM Edit Program Edit any of the 10 user defined internal Auto Programs EDIT PROGRAM Edit Scenes Edit any of the scenes of the internal Auto Programs EDIT PROGRAM Record Controller The fixture features an integrated DMX recorder by which you can transmit the programmed scenes from your DMxX controller to the moving head Adjust the desired scene numbers via the encoder from to When you call up the scenes at your controller they will automatically be transmitted to the moving head EDIT PROGRAM Record Controller Working With Built In Programs A Master unit can send up to 3 different data groups to the Slave units i e a Master unit can start 3 different Slave units which run 3 different programs The Master unit sends the 3 program parts in a continuous loop Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Part 1 Part 2 Part 3 e Part 1 Part 2 Part 3 We Part 1 Part 2 Part 3 i The slave unit receives data from the Master unit according to the group which the slave unit was assigned to If e g a Slave unit is set to Slave 1 in the menu Set to Slave the Master unit sends Auto Program Par
35. ling suspension trussing Deformations in the housing could allow for dust to enter into the fixture Damaged rigging points or unsecured rigging could cause the fixture to fall and seriously injure a person s e Electric power supply cables must not show any damage material fatigue or sediments Never remove the ground prong from the power cable 46 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com TECHNICAL SPECIFICATIONS FEATURES 1200 Watt Comparable Lumens Output Motorized 8 50 Zoom and Focus Bi Directional Animation 3 Facet Prism and Frost Effects CMY Color Mixing CTO and CTB Color Correction Internal EWDMX Wireless DMX Receiver RDM Remote Device Management SOURCE 800 Waftt Platinum 35 Lamp gt 20 000 Lumens 7 800k gt 75 CRI 750 Hour Average Life EFFECTS Bi Directional Animation Effect 3 Facet Rotating Indexing Prism and Frost Filter Mechanical Dimming 0 100 High Speed Mechanical Shutter Strobe Iris COLOR 8 Interchangeable Dichroic Colors Including UV CMY Color Mixing CTO amp CIB Color Correction GOBOS 2 Rotating Gobo Wheels 12 Interchangeable Rotating Indexing Glass Gobos CONTROL CONNECTIONS 3 DMX Channel Modes 27 29 41 6 Button Touch Control Panel Full Color 180 Reversible LCD Menu Display 16 Bit Resolution Adjustable Movement 3pin and Spin DMX In Out powerCON Power In SIZE WEIGHT Length 17 6 477mm Width 20 0
36. matically performs PAN TILT correction in the event either one is disrupted during normal operation PERSONALITY Status Settings Movement Speed select desired Movement speed PERSONALITY Status Settings Mic Sensitivity select desired Microphone Sensitivity 29 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com PERSONALITY Status Settings Hibernation select desired Hibernation time PERSONALITY Service Setting Password service Password 050 PERSONALITY Service Setting RDM PID select various submenus via RDM RDM stands for Remote Device Management which provides the ability to control the device remotely while connected to a DMX bus ANSI E1 20 2006 by ESTA specifies the RDM standard as an extension of the DMX512 protocol Manual settings like adjusting the DMX starting address are no longer needed This is especially useful when the device is installed in a remote area RDM ready and conventional DMX devices can be operated in one DMX line The RDM protocol sends its own packages in the DMX512 data feed and does not influence conventional devices If DMX splitters are used and RDM control is to be used these splitters must support RDM The number and type of RDM parameters depend on the RDM controller being used PERSONALITY Fans Control select desired Fan setting PERSONALITY Display Setting Shutoff Time Define how many minutes before
37. mp change carefully read all the following instructions LAMP PROTECTION CIRCUITRY Because of the nature of the extreme heat associated with the Phillips Platinum 35 lamp and the tight nature of the internal optical system it is IMPERATIVE that the lamp be replaced every 750 Hours This is done to protect the internal optical system as well as prevent accidental lamp explosion which could lead to hot glass particles falling from the fixture er FAILURE TO CHANGE THE LAMP AT THE 750 HOUR RATED LIFE WILL CAUSE THE FIXTURE TO AUTOMATICALLY SHUT DOWN At 750 Hours the LCD control display will begin to flash Replace The Lamp and the lamp will flicker for the first five minutes of operation At this point the lamp has reached the maximum rated life and should be replaced immediately After 750 Hours the fixture will no longer resoond to DMX commands and immediately enter a hibernation mode that will electronically discontinue all fixture functionality with the exception of a few menu commands The fixture will continue to enter hibernation mode until the lamp is replaced and the lamp clock has been reset To replace the lamp follow the safety guidelines and procedures listed on the next page er THE PLATINUM 35 LAMP IS NOT A HOT STRIKE TYPE LAMP YOU MUST WAIT APPROXIMATELY 10 MINUTES AFTER POWERING THE LAMP OFF BEFORE YOU CAN POWER IT BACK ON AGAIN 11 PLATINUM SPOT 35 PRO User Manual Version LATION www elationlight
38. n inserting standard 5pin XLR connectors in to a 3pin line a cable adaptor must be used these adaptors are readily available at most electric stores The following chart details a proper cable conversion 3 Pin XLR to 5 Pin XLR Conversion 22 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com DMX ADDRESSING All fixtures should be given a DMX starting address when using a DMX controller so the correct fixture responds to the correct control signal This digital starting address is the channel number from which the fixture starts to listen to the digital control information sent out from the DMX controller The allocation of this starting DMX address is achieved by setting the correct DMX address on the digital display located on the back of the fixture You can set the same starting address for all fixtures or a group of fixtures or set different address for each individual fixture Be advised that setting all fixtures to the same DMX address will subsequently control all fixtures in the same fashion in other words changing the settings of one channel will affect all the fixtures simultaneously If you set each fixture to a different DMX address each unit will start to listen to the channel number you have set based on the quantity of control channels DMX channels of each fixture That means changing the settings of one channel will only affect the selected fixture In the case of the PLATINUM SPOT
39. nd by mode until subsequent repairs can be made s Less Than 3 Errors The fixture has less than 3 errors therefore most other functions will work properly The fixture will attempt to operate normally until the errors can be correct by a technician The errors in guestion will remain flashing in the display as a reminder of internal errors 43 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com ELATIONO PLATINUM 35 PRO ERROR CODES specifications and features are subject to change without any prior written notice ERROR CODE DESCRIPTION The PAN movement is not located in the default position after the reset This message will appear after a fixture reset if the magnetic indexing circuit malfunctions PAN Er sensor failed or magnet is missing or there is a motor failure defective motor or a defective motor IC drive on the main PCB This error may also be displayed if the head yoke was blocked during a reset function The TILT movement is not located in the default position after the reset This message will appear after a fixture reset if the magnetic indexing circuit malfunctions TILT Er sensor failed or magnet is missing or there is a motor failure defective motor or defective motor IC drive on main PCB This error may also be displayed if the head was blocked during a reset function The Color Flag is not located in the default position after the reset Cyan This message will appear after the reset
40. perature Switch Between C F Initial Status PAN XXX Initial Effect Position Display Setting WDMX OFF Deactivate WDMX Activate WOMX Activate WDMX WI Act amp Data Out Act amp Data Out Clean WDMX Memo Reset Wireless DMX Memory Reset Default ON OFF Restore Factory Settings 25 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com ELATIONO PLATINUM SPOT 35 PRO SYSTEM MENU VERSION 1 specifications and features are subject to change without any prior written notice MAIN MENU SUBMENU OPTIONS VALUES Defour Setingsin Bou DESCRIPTION Rean o SS Restroom seem oset Function ees 1 eow Restes 1 ecos ed fue 1 o Reserse ondor Dimmer Reset Others 1 Oeo Manual Control PAN XXX Fine Adjustments Effect Adjust Calibrate Values Calibrate Password a Password 050 Standard Mode Basic Mode Extended Mode User Mode User Mode Set User Mode A User Mode B User Mode C Channel Assignments Select Programs Select Programs To Be Run Eat Progam siepOi sOox Pogiam no O Edit Program DMX Channel Modes Scene 001 Edit Scenes a Fade lime Manual Scenes Edit Scene Time Scene 250 Input By Outside Stores Scenes via Ext DMX Console Record Controller XX XX Automatic Scenes Recorder FUNCTION Set DMX Address Define desired DMX address via the Control Panel FUNCTION DMX Value Disolay DMX 512 value of each channel FUNCTION
41. pped in perfect operating condition Carefully check the shipping carton for damage that may have occurred during shipping If the carton appears to be damaged carefully insoect your unit for damage and be sure all accessories necessary to operate the unit have arrived intact In the event damage has been found or parts are missing please contact our customer support team for further instructions Please do not return this unit to your dealer without first contacting Customer support at the number listed below Please do not discard the shipping carton in the trash Please recycle whenever possible BOX CONTENTS e 2 Omega Brackets e 1 3pin DMX Cable e 1 powerCON Cable e 1 Safety Cable Manual amp Warranty Card 4 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com CUSTOMER SUPPORT Elation Professionale provides a customer support line to provide set up help and to answer any question should you encounter problems during your set up or initial operation You may also visit us on the web at www elationlighting com for any comments or suggestions For service related issue please contact Elation Professional ELATION SERVICE USA Monday Friday 8 00am to 5 00pm PST Voice 323 582 3322 Fax 323 832 9142 E mail support elationlighting com ELATION SERVICE EUROPE Monday Friday 08 30 to 17 00 CET Voice 31 45 546 85 30 Fax 31 45 546 85 96 E mail support elationlighting eu WARR
42. rsion www elationlighting com DMX CHANNEL FUNCTIONS AND VALUES ELATIONO PLATINUM SPOT 35 PRO DMX Channel Values Functions VERSION 1 41 DMX Channels specifications are subject to change without any prior written notice Rotation direction Clockwise or Counterclockwise of COLOR GOBO and PRISM effects depends on orientation of the fixture head MODE CHANNEL VALUE FUNCTION SE bd PAN MOVEMENT 8 BIT 0 255 PAN Movement PAN FINE MOVEMENT 16 BIT 0 255 Fine Control of PAN Movement 11 MOVEMENT 8 BIT 255 TILT Movement _ MAN MOVEMENT 16 BIT 299 O um Fine Control of TILT Movement COLOR WHEEL FINE ADJUSTMENT 0 255 FINE Adjustment of Color Wheel to Any Position a 255 O WHITE 255 100 CYAN CYAN FINE 0 255 FINE Adjustment of CYAN 0 255 O WHITE 255 100 MAGENTA MAGENTA FINE ee 0 255 FINE Adjustment of MAGENTA D pe fe n rose 0 255 O WHITE 255 100 YELLOW Ma Ine rose 0 255 FINE Adjustment of YELLOW CTO COLOR pr fe foe poe 0 255 O WHITE 255 100 CTO e O CTO COLOR FINE 0 255 FINE Adjustment of CTO 37 PLATINUM SPOT 35 PRO User Manual Version I www elationlighting com ELATIONO PLATINUM SPOT 35 PRO DMX Channel Values Functions VERSION 1 41 DMX Channels specifications are subject to change without any prior written notice Rotation direct
43. ssful repeat the process until paring is secured e The fixture will store the pairing information inside a nondestructive memory bank once a link is created between the fixture and an EWDMX Transmitter The fixture will remember the paired EWDMX Transmitter even if the fixture is turned OFF for extended periods of time 35 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com CLEARING EWDMX TRANSMITTER LINK e Access the Wireless DMX sub menu from the PERSONALITY menu and then select Clear WDMX Memo to clear any existing link between the fixture and a EWDMxX Transmitter The Wireless indictor on the fixture will turn solid RED when the link is severed e You may also clear the link directly from the EWDMX Transmitter First be sure the fixture s is powered ON and then hold down the configuration button on the EWDMX Transmitter for as least 5 seconds This will automatically clear the link between the EWDMX Transmitter and any fixture that is powered ON All EWDMX indictors will glow solid RED if the procedure was successful FIXTURE WIRELESS INDICATOR RED GREEN Rapid Flashing syncing to an EWDMX Transmitter RED GREEN Slow Flashing Paired with an EWDMX Transmitter but not receiving a DMX signal from a controller GREEN Solid Paired with an EWDMX Transmitter and receiving DMX data RED Solid Not paired with an EWDMX Transmitter FREE 36 PLATINUM SPOT 35 PRO User Manual Ve
44. t 1 to the Slave unit If set to Slave 2 the Slave unit receives Auto Program Part 2 To start an Auto Program proceed as follows 32 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com EDIT PROGRAM Record Controller Working With Built In Program continued 1 Slave Setting e Select Function Mode e Press ENTER to confirm e Select Set to Slave e Press ENTER to confirm Select Slave 1 Slave 2 or Slave 3 e Press ENTER to confirm Press MODE ESC in order to return to the main menu 2 Automatic Program Run e Select Function Mode e Press ENTER to confirm Select Auto Program e Press ENTER to confirm Select Master or Alone e Press ENTER to confirm Press MODE ESC in order to return to the main menu 3 Program Selection for Auto Pro Part select Edit Program e Press ENTER to confirm Select Select Programs Press ENTER to confirm Select Auto Pro Part 1 Auto Pro Part 2 or Auto Pro Part 3 and select which slave program is to be sent Selection Part 1 means that the Slave unit runs the same program as the master units Press ENTER to confirm Press MODE ESC in order to return to the main menu 33 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com EDIT PROGRAM Record Controller Working With Built In Program continu
45. the LCD Menu display will automatically shut OFF PERSONALITY Display Setting Display Reverse When ON the LCD Menu display by is rotated inverted 180 PERSONALITY Display Setting Key Lock When ON Control Panel buttons lock automatically after exiting main menu for 15 seconds To unlock keep MODE ESC button pressed for 3 seconds PERSONALITY Temperature C F Define how fixture displays internal temperature Celsius or Fahrenheit PERSONALITY Initial Effect Create custom PAN TILT and Effect settings and save as a custom Home Position PERSONALITY Wireless DMX Control the functionality of the internal wireless DMX receiver PERSONALITY Reset Default When ON all factory settings are restored 30 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com RESET FUNCTION Reset ALL Reset ALL internal motors to Home Position RESET FUNCTION Reset PAN and TILT Reset only PAN and TILT motors to Home Position RESET FUNCTION Reset Colors Reset only Color Wheel to Home Position RESET FUNCTION Reset Gobos Reset only Gobo Wheels to Home Position RESET FUNCTION Reset Shutter Reset only blackout Shutter to Home Position RESET FUNCTION Reset Others Reset ALL other motors not associated previously listed commands to Home Position EFFECT ADJUST Test Channel select and auto test each individual channel function independently from t
46. ting retailers Your cables should be made with a male and female XLR connector on either end of the cable Also remember that a DMX line must be daisy chained and cannot be split unless using an approved DMX splitter such as Elation s Opto Branch 4 Opto Branch 8 or DMX Branch 4 M 20 PLATINUM SPOT 35 PRO User Manual Version ATION www elationlighting com DMX Output DMX Input DMX Output DMX Input 3 Pin XLR Socket 3 Pin XLR Socket 5 Pin XLR Socket 5 Pin XLR Socket 1 Ground 1 Ground 2 Data 2 Data o 3 Data 3 Data 4 Open 5 Open Be sure to follow the above figure when making your own cables Do not use the ground lug on the XLR connector Do not connect the cable s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR outer casing Grounding the shield could cause a short circuit and erratic behavior DMX 512 CONTROLLER CONNECTION Connect the provided XLR cable to the female XLR output of your controller and the other side to the male XLR inout of the PLATINUM SPOT 35 PRO The diagram below illustrates a typical DMX 512 connection when the fixture is in the 41 Channel Extended Mode You can chain multiple panels together through serial linking The cable that should be used is two conductor shielded DMX cable with XLR input and output connectors Always be sure daisy chain your in and out data connections never split or Y your DMX connections unl
47. uct rechargeable batteries to be free of manufacturing defects in material and workmanship for a period of six months 180 days from the original date of purchase This warranty excludes discharge lamps and all product accessories This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories It is the owner s responsibility to establish the date and place of purchase by acceptable evidence at the time service is sought B For warranty service send the product only to the Elation Professional amp factory All shipping charges must be pre paid If the requested repairs or service including parts replacement are within the terms of this warranty Elation Professional will pay return shipping charges only to a designated point within the United States If any product is sent it must be shipped in its original package and packaging material No accessories should be shipped with the product If any accessories are shioped with the product Elation Professional shall have no liability what so ever for loss and or or damage to any such accessories nor for the safe return thereof C This warranty is void if the product serial number and or labels are altered or removed if the product is modified in any manner which Elation Professional concludes after inspection affects the reliability of the product if the product has been repaired or serviced by anyone other than the
48. vers removed These covers have been specially designed to shield against UV radiation LAMP REPLACEMENT Please note that due fo the nature of the Phillips Platinum 35R Lamp and the optical path of the fixture the lamp MUST BE replaced at 2 000 hours Use only Genuine Original Phillips platinum lamps Other brand lamps may cause damage and void warranty 9 PLATINUM SPOT 35 PRO User Manual Version 1 ATION www elationlighting com ol Lens Assembly N LCD Menu Control Display o Go Wireless DMX Indicator A DC Switch on Microphone On LEFT Button NS DOWN Button 99 RIGHT Button OGOGO O MODE ESC Button 10 UP Button 11 ENTER Button GE VC 12 Wireless DMX Antenna r K V J EE d O mraeg LH 14 Lamp Access Rear Panel y 15 Fuse A 16 Power IN DowerCON 17 5pin DMX IN D LU 6 ET WR ET ee A 18 5pin DMX OUT 170549 494920 19 3pin DMX IN 20 3pin DMX OUT 10 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com LAMP INSTALLATION INSTRUCTIONS LAMP REPLACEMENT Please note that due to the nature of the Phillips Platinum 35 Lamp and the optical path of the fixture the lamp MUST BE replaced at 750 hours Use only Genuine Original Phillips Platinum 35 Lamps Other brand lamps may cause damage and void warranty INSTALLING OR REPLACING THE LAMP To ensure a proper safe la
49. xture a light smoke or smell may emit from the interior of the fixture This is a normal process and is caused by excess paint in the interior of the casing burning off from the heat associated with the lamp and will decrease gradually over time This fixture is a professional lighting effect designed for INDOOR DRY LOCATIONS ONLY on stage in nightclubs theatres etc Please make sure there are NO FLAMMABLE MATERIALS close to the fixture while operating to prevent any fire hazard The fixture must be installed in a location with adequate ventilation at least 1 5 feet 5m from adjacent surfaces Be sure no air ventilation slots are blocked DO NOT attempt installation and or operation without knowledge how to do so DO NOT permit operation by persons who are not qualified to operate this type of fixture Most damages are the result of operations by nonprofessionals Consistent operational breaks may ensure the fixture will function properly for many years to come DO NOT shake fixture avoid brute force when installing and or operating fixture Always install the fixture with an appropriate safety cable When installing the fixture in a suspended environment always use mounting hardware that is no less than M10 x 25 mm also be sure the hardware is insert in the pre arranged screw holes in the bracket of the fixture Use the original packaging and materials to transport the fixture in for service DO NOT TOUCH the housing bare
Download Pdf Manuals
Related Search