Air Purification System - Cli-mate
Contents
1. INSTALLATION AND OPERATING INSTRUCTIONS 5 L CLI MATE improve your environment TROUBLE SHOOTING BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLE SHOOTING TIPS FIRST Problem Possible Causes What To Do No Power 1 Unit is not plugged into wall socket 1 Check connection to wall socket 1 Air ventilation around unit 1 There must be at least 30cm between unit and wall not sufficient or other appliances Unit overheating 2 Air inlet or air outlet is being obstructed 2 Ensure there are no object obstructing the air inlet or or blocked by foreign objects air outlet 3 Internal malfunction 3 Return unit to service agent Call customer care 1 Filters may be heavily soiled and due for The unit is not effective replacement 1 Replace filter ae 1 Ensure the unit is placed on a level surface 1 Unit is on an uneven surface 2 Ensure that no foreign objects have fallen into the unit i j 2 Foreign objects have fallen into the unit i i Excessive loud noise gn op ane Aroc 3 Faulty internals y 3 Call customer care 6 INSTALLATION AND OPERATING INSTRUCTIONS Your Aquaport 12 Month Repair or Replacement Warranty Aquaport warrants this appliance to the first purchaser and subject to the stated conditions Warranty covers any defects in material or workmanship in the manufactured product within the first twelve months from the date of purchase To make a warranty claim you must call Aquaport on toll free2. a NG i CLI MATE improve your environment Air Purification System CLI AP20 Installation amp Operating Instructions T CLI MATE improve your environment Congratulations on your purchase of a Cli Mate Air Purification System This Air Purifier improves the quality of the air in your home by helping to eliminate airborne matter such as allergens and unpleasant odours Note Please read through the instructions carefully before using or installing the product and ensure that the manual is kept in a safe place for future reference The system must be properly installed and located in accordance with the installation instructions before it is used During the set up of this product if you have any questions comments issues DO NOT RETURN TO STORE FOR SERVICE AND TECHNICAL ADVICE ON THIS PRODUCT FREE CALL 1300 764 325 CUSTOMER HOTLINE 1300 764 325 Register your warranty online at www cli mate com au warranty and registration Aquaport Corporation Pty Ltd PO Box 81 Findon SA 5023 Australia Telephone 08 8354 0711 Facsimile 08 8354 0722 i i Electrical Requirements Email SENE ORE ER PAT LEONAN Australia New Zealand 240V 230V 50Hz Web www cli mate com au Due to manufacturing alterations product may Social Fi climatebrand W climatebrand N 23934 vary slightly from the pictured SAFETY PRECAUTIONS Read all instructions carefully e All components need to be installed in accordance with the user
3. caused by accident fire or floods Proof of purchase is required for warranty claims Please keep purchase receipt in a safe place To enable us to register your warranty and provide service should a problem occur we recommend you register your warranty online at www cli mate com au warranty and registration Aquaport Corporation Pty Ltd 5 John Street Flinders Park South Australia 5025 Customer Care 1300 764 325 INSTALLATION AND OPERATING INSTRUCTIONS 7 T CLI MATE improve your environment 8 INSTALLATION AND OPERATING INSTRUCTIONS INSTALLATION AND OPERATING INSTRUCTIONS 9 RE ER CLI MATE improve your environment CUSTOMER HOTLINE 1300 764 325 Aquaport Corporation Pty Ltd PO Box 81 Findon SA 5023 Australia Telephone 08 8354 0711 Facsimile 08 8354 0722 Email aquaport aquaport com au Web www cli mate com au Social Fi climatebrand Y climatebrand
4. manual instructions for correct performance of unit e This appliance should be used in conjunction with a safety switch e This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety e Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner If the supply cord is damaged it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard e Children should be supervised to ensure that they do not play with the appliance e Do not use appliance for other than intended use e Do not disassemble repair or re form the unit it may cause injury fire or other malfunctions A qualified service agent must make all service adjustments Removing any part or attempting to service the dryer will void the warranty Unplug from outlet when not in use and before cleaning Never plug in or unplug unit with wet hands e Do not use unit outdoors or expose to greasy or damp environments e Keep the rear air inlet and outlet is free from air blocking materials such as clothing plastic bags or papers Air flow is required for the unit to operate effectively e Place unit on a flat location at leas
5. ctive carbon filter Turns unit ON OFF SPEED Allows selection for desired fan speed setting SLEEP LOW MEDIUM and HIGH AUTO MODE Operates in a loop cycle on these settings HIGH speed for 2 hours MEDIUM speed for 2 hours LOW speed for 2 hours TIMER To set automatic OFF timer at 1 4 8 hour settings Display Panel Control Buttons Handle Air Outlet Wall Mounts INSTALLATION AND OPERATING INSTRUCTIONS 3 a I CLI MATE FILTERS The dual layer filter contains a pre filter a HEPA filter and an activated carbon filter The pre filter traps larger particles such as dust pet hair and large sized allergens The HEPA filter grade H12 removes 99 5 of particles as small as 0 3 microns and greater from the air It is capable of removing smoke dust pollen pet dander mold spores bacteria and allergens in the air The Activated carbon filter absorbs common household odours VOCs cigarette odours chemical fumes and smoke ENE UN q HEPA filter TO sf Activated Carbon Filter 4 INSTALLATION AND OPERATING INSTRUCTIONS CLEANING AND MAINTENANCE Before carrying out any maintenance or cleaning of the unit make sure that the power to the unit is turned off and power cord is unplugged from the power socket External cleaning of unit e Do not clean unit with any abrasive cleaning agents or solvents e Do not apply any water directly onto the unit e Only use a soft clean clot
6. h for all cleaning purposes e Clean the air inlet and outlet with a dry cloth soft brush or vacuum cleaner CLEANING THE PRE FILTER It is recommended that the Pre filter the removable white layer is cleaned every 1 2 weeks of unit operation depending on the air quality of the room To clean the Pre filter 1 The removable Pre filter is attached by Velcro Gently peel away the Pre filter 2 Fill the sink with lukewarm water and gently hand wash the Pre filter under the water for 2 3 minutes or until it is completely clean 3 Rinse the Pre filter with clean tap water 4 Use a towel to remove any excess water from the Pre filter 5 Allow the Pre filter to dry for 12 24 hours 6 When the Pre filter is completely dry re attach and place back into the air purifier Note When placing the filters back into the air purifier ensure that the white belts are facing outwards and that the Pre filters are facing towards the air inlet CLEANING THE HEPA AND ACTIVATED CARBON FILTER It is recommended that the HEPA and activated carbon filters are cleaned every 100 500 hours of unit operation depending on the air quality of the room To clean the HEPA and Activated Carbon Filter 1 Turn off unit and disconnect the power 2 Place both hands at the bottom corners of the front cover and pull out Pull out the filter by the white belt attached Gently peel away the Pre filter layer Run a vacuum cleaner with a nozzle or brush attachment
7. ing is at LOW speed mode 3 To select speed press until LED Light is on desired speed LOW MEDIUM HIGH SLEEP respectively 4 To set automatic off timer press 2 until LED light is on desired time 1 4 78 hours Unit will automatically switch off once selected time duration has lapsed 5 To select AUTO MODE press and the AUTO led light will be lit The unit will now start purifying in a loop cycle on these settings HIGH speed for 2 hours MEDIUM speed for 2 hours LOW speed for 2 hours 6 To activate CHILD LOCK function hold down AUTO MODE 2 for 3 seconds or until CHILD LOCK light is lit Note To deactivate the CHILD LOCK function hold down AUTO MODE 4 for 3 seconds or until CHILD LOCK light extinguishes 2 INSTALLATION AND OPERATING INSTRUCTIONS During the set up of this product if you have any questions comments issues DO NOT RETURN TO STORE FOR SERVICE AND TECHNICAL ADVICE ON THIS PRODUCT FREE CALL 1300 764 325 DISPLAY PANEL HIGH MEDIUM LOW SLEEP Indicates the Fan speed POWER Power Indicator llluminates green when power is turned ON Filter change indicator Light will flash when the filter needs to be changed AUTO Automatic Mode Child Lock Child safety lock thr 4hr 8hr Timer indicator CONTROL PANEL BUTTONS COMPONENT IDENTIFICATION 5 I V O j ds i e i Front Cover Air Inlet Triple Layer Filter Initial Filter HEPA filter and POWER i a
8. number 1300 764 325 for instructions If a product is found to be faulty there is a 90 day return policy from the date of purchase For warranty claims outside of 90 days from date of purchase product will be repaired or replaced at our discretion Repair or replacement costs of the product will be covered under warranty by Aquaport Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired Refurbished parts may be used to repair the goods Warranty does not cover filters which are consumable unless proven to have defects in material or workmanship in the manufactured product Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if goods fail to be of acceptable quality and the failure does not amount to a major failure Conditions of this Warranty 1 S This product has been fully installed in accordance with the user manual installation instructions The warranty extends only to repairing or replacing any component that proves to be defective in material or workmanship The warranty does not cover defects occasioned by misuse alterations accidents or used for other than the intended purpose The warranty does not cover damage to the product
9. on low power setting along the HEPA white side and Activated Carbon black side filters to pick up the dust and various particles 6 Re attach the Pre filter layer and place back into the air purifier Note When placing the filters back into the air purifier ensure that the white belts are facing outwards REPLACING FILTER When the lifespan of the 3 layer filter reaches it end the POWER light will flash green indicating that it needs to be changed Discard the old filter and replace with a new one It is not reusable Cli Mate Replacement Filter Product Code CLI RF AP20 The lifespan and duration of the dual layer filter depends on the air quality and surrounding environment The higher level of pollutants the shorter the filter lifespan It is advisable to change the 3 layer filter at least every 8 months or 1500 hours of unit operation HOW TO REPLACE THE FILTER 1 Turn off unit and disconnect the power 2 OPEN THE FRONT COVER Place both hands at the bottom corner of the front cover press down the buttons on the sides while pulling out 3 REMOVE THE FILTER Pull out the filter by the white belt attached and discard 4 INSTALL NEW FILTER Replace with new filter Ensure that the white belt is facing outwards 5 Line up the top of the front cover first and then snap in the lower part of the front cover Ensure that the front cover is firmly intact 6 Hold down Speed button on the unit to reset the filter timer
10. t 30cm from wall or other appliances e Unit must be placed on a stable flat surface to reduce possible excessive vibration and noise e Keep the dryer away from fire flammable gas combustible products or vapours and corrosive substances e Do not wash or reuse the filters e Do not operate the unit without filters e To protect against fire electric shock and personal injury do not immerse cord plugs or appliance in water or other liquid e Do not place on or near a hot gas electric burner or heating appliance e Check voltage to be sure that the voltage indicated on the nameplate agrees with your voltage Model Code Product Dimensions Coverage area Power consumption Net weight Gross Weight Air Change Hr Air Purifier CLILAP20 H394 x W310 x D139mm Up to 20m 35 watts 3 5 kg 4 2 kg 30m2 x 4 5 Air Flow Hr Clean air Delivery rate Power cord length Noise level in Turbo Mode Noise level in Sleep Mode Replacement Filter 133m 75cbm smoke 1 8m 58dB 28dB CLERF AP20 INSTALLATION AND OPERATING INSTRUCTIONS 1 T CLI MATE improve your environment OPERATION INSTRUCTIONS 1 Plug unit into power socket unit will beep and control panel lights will illuminate before extinguishing Unit is now in standby mode 2 Press POWER button 0 to turn unit on The unit will beep and display panel lights will illuminate indicating current settings Note The purification default sett
Download Pdf Manuals
Related Search