USER`S MANUAL
Contents
1. 80 to a digital device such as a CD R or Computer ATEWNASSVdSNOILINNA SAWNVN LuVvd2. with 3313rpm More than 50dB DIN B More than 15 dB SNOILOANNOD 45 fo BAe ET Le Starting playback 1 Turn the power dial to turn on The speed button and the strobe illuminator light up Turn on the amplifier s power Then select the function switch Set a record on the platter To play 45 rpm records use the included adaptor Set the speed button s according to the record s playing speed Press the START STOP button Hold the head shell s finger support move the tone arm to the desired position over the record Lower the tone arm gently until the stylus is on the record and playback begins Adjust the speed of rotation When QUARTZ LOCK Is off the speed of the platter can be adjusted in a range of 8 12 by the pitch slider The speed is lower than the displayed speed when the strobe is flowing to the right higher than the displayed speed when the strobe is flowing to the left When the strobe is stopped the platter is turning at the displayed speed When the key adjust button is pressed during the pitch control mode the button lights on and musical key tone can be kept constant even the platter speed is changed with the slider Stopping or interruption playback Stopping or interruption playback Raise the tone arm off the record Hold the head shell s finger support and move the tone arm back onto the arm rest Secure the tone a
3. 08 89415 USER S MANUAL LOAYIG 502 STR880 1029B ATEWNASSY Please check to make sure the following items are included with the main unit in the carton 1 Operating instructions 2 Platter 3 Slip mat 4 Counterweignt 5 45 rom adaptor 6 Headshell with 520sk cartridge 7 Dust cover 8 AC cord 9 Connecting cord FEATURES 1 High torque brush less DC motor This set uses a high torque brushless DC motor to reach the normal speed of rotation rapidly and reduce braking time t 8 12 pitch control The pitch can be changed in a range of 8 12 using the pitch slider A quartz lock On off button lets you return to the normal speed of rotation at the touch of a button Pitch correction When pitch correction is on musical key tone can be kept constant even when the platter speed is changed with the slider 78 rpm compatible This set can play 33 45 and 78 rpm records Digital out The music output is in digital format and can be reproduced on an external digital processor or an MD recorder Remover all the parts from the box Remover the packaging materials from the unit and all the parts Set the parts on a stable surface when removing the packaging materials Handling the parts roughly could result in scra
4. and forward playback Hold the reverse button more than 0 5sec the orange light will on and the player will brake stop hold the button again to disable the motor off Headshell The cartridge has been pre mounted on the headshell When installing a cartridge refer to the installation instructions supplied by the manufacturer of that cartridge During installation attach the stylus protector to guard the stylus tip from damage Pitch slider Use this to change the speed of the platter when the PITCH button is lit You can adjust the speed in a range of 8 or 12 Headshell locking nut Attach headshell by inserting into the front end of the tone arm then turn the locking nut clockwise with the head shell firmly held horizontally Tonearm Tone arm clamp and rest Use this rest the tone arm and clamp it in position during transportation 8 12 switch Press this button to switch pitch in 8 that green light is on and pitch in 12 that red light is on Counterweight Use this to balance the tone arm and to adjust the stylus pressure Extra stylus holder Place extra headshells here 45rpm adaptor holder Place on the attached 45 rpm adaptor here Push down the rear side of 45 rpm adaptor to take it Remote Start Stop This jack can be connected with an external switch to perform the Start Stop operation 29 Output terminal DIGITAL OUTPUT Use this output to connect your STR8
5. rm on the arm rest Press the START STOP button The platter stops turning Mounting the counterweight 4 Mount the counterweight on the shaft at the back of the tone arm Mounting the cartridge 4 Insert the headshell on which the cartridge has been mounted into the tone arm and fasten it in place using the lock nut Instructions on how to setup the tonearm from the website should be added on this page PEKE EEA TOP PANEL 3 lt 9 S Strobe dots 50Hz _ 60Hz _ Voltage selector 230v Check that the voltage selector switch is set to an appropriate voltage before use s 15V Power dial POWER ON Rotate right OFF Rotate left Start Stop button START STOP Press this button to start and stop the platter rotation Platter revolution speed buttons 33 rpm Press 33 45 rpm Press 45 78 rpm Press 33 and 45 Target light Press the button to the right and a light will pop up directed at the stylus position Key correction Press to enable key correction the light will turn on and the key won t change when adjusting the pitch slider Press again to disable key correction the light will turn off Quartz lock ON Will hold the revolution speed at exactly the specified speed OFF Will allow use of the pitch adjust Reverse Motor off Press this button to switch the reverse
6. tches or deformation Check the voltage selector switch is set to appropriate position U S A amp CANADA 115V EUROPE 230V Insert the platter onto the motor shaft Set the slip mat on the platter lining it up with the motor shaft Be sure to turn off the amplifier s power when making connections 1 Analog connections Connect the left white and right red plugs RCA cord to the amplifier s left and right Phono Connect the connector side of the power cord to the set s power connector terminal AC IN Plug the power cord into an appropriate power outlet Check that the power outlet s capacity is sufficient 2 Digital connections Use an RCA cord not included to connect the digital output jack Connect the RCA cord of step 1 into the digital input jack of a Digital Processor or MD Recorder Connect the connector side of the power cord to the set s power connector terminal AC IN Plug the power cord into an appropriate power outlet Check that the power outlet s capacity is sufficient Power supply Power consumption Dimensions Weight Motor Starting Torque Platter Pitch Brake Wow amp Flutter S N ratio Channel Separation 115 230v 50 60Hz 15W 450 W x 352 D x 148 H mm 9 5Kg 8pole 3phase brushless DC motor More than 1 6 kgf cm 330mm dia Aluminun diecast 12 8 Electronic brake Less than 0 20 WRMS JIS WTD
Download Pdf Manuals
Related Search